Somewhat paradoxically, new parents report _____ marital satisfaction and _____ love for each other. less; more.

The speed of the electron when it strikes the anode is vfinal = 2.6x107 m/s.

Vacuum tubes were often utilized in radios and other devices before the development of solid-state electronics. A diode is a straightforward sort of vacuum tube that simply consists of two electrodes enclosed in a highly evacuated space.

The cathode, one electrode, emits electrons from its surface while being kept at a high temperature.

The cathode and the opposite electrode, known as the anode, are kept at a potential difference of a few hundred volts, with the anode being at a greater potential.

An electron leaves the

cathode of a diode with a radius of 6.200x10⁻²cm and

an anode with a radius of 0.5580 cm, and

with a potential difference of 320 V.

The initial speed of the electron is 0 m/s.

The speed (vfinal) when it strikes the anode can be calculated using the equation vfinal = (2 × e × V)1/2,

where e is the electron charge (1.6x10⁻¹⁹C).

Therefore, the speed of the electron when it strikes the anode is

vfinal = (2 × 1.6x10⁻¹⁹ × 320)1/2 = 2.6x107 m/s.

To know more about Speed: https://brainly.com/question/13943409

#SPJ11

The other plate of the capacitor is induced with an opposite charge through electrostatic induction as the particle of the flow approaches one plate.

As the particle of the flow approaches one plate of the capacitor, it induces an opposite charge on the other plate of the capacitor through the process of electrostatic induction. The electric field produced by the charge on the approaching plate pushes the electrons on the other plate away from the approaching plate, resulting in an accumulation of charge of the opposite sign on the other plate.

This process continues until the potential difference between the plates becomes large enough to produce a discharge, after which the process of electrostatic induction ceases. The discharge may occur in the form of a spark or a breakdown of the dielectric material separating the plates, depending on the strength of the electric field and the dielectric strength of the material.

Overall, the other plate of the capacitor experiences a temporary polarization and a buildup of charge of the opposite sign due to the approaching particle.

To know more about capacitor, refer here:

https://brainly.com/question/30889004#

#SPJ11

The dimensions of the field can be found to be 75 yards in width and 150 yards in length.

Given:
Let the width of the rectangular field be x
Length of the rectangular field = 2x
Perimeter of the rectangular field = 450 yards

Formula Used:
Perimeter of a rectangle = 2 (l + w)

Where l and w are the length and width of the rectangle respectively.

Solution:
As per the question,
Perimeter of the rectangular field = 450 yards

Therefore, 2(Length + Width) = 450
2(x + 2x) = 450
2(3x) = 450
6x = 450
x = 75
Therefore, the width of the rectangular field is 75 yards
Length of the rectangular field = 2x = 2 × 75 = 150 yards

Hence, the dimensions of the field are 75 yards by 150 yards.

To know more perimeter, refer here:

https://brainly.com/question/30252651#

#SPJ11

The corresponding electric force on an electron near the surface of the earth is approximately 1.76 x 10^−19 N, while the gravitational force from the earth on the same electron is approximately 9.08 x 10^-30 N. This shows that the gravitational force is much weaker than the electric force.

To shield the electron from this force, one can use a Faraday cage, which is an enclosure made of conductive materials that can block external electric fields.

The cage works by redistributing the charges so that they cancel out the external electric field. In the case of a fluctuating electric field, the cage will continue to protect the electron as long as the field changes are not too rapid. For stronger or rapidly changing fields, other types of shielding may be necessary.

For more similar questions on gravitational force:

brainly.com/question/2598080

#SPJ11

The correct solution is "Perform multiple Join recipes instead." It is not possible to join more than two datasets at a time with the Join recipe. Each Join recipe can only join two datasets at a time. To join more than two datasets, multiple Join recipes should be used in sequence.

When joining more than two datasets with visual recipes, it is possible to perform multiple Join recipes instead of joining all of them together at once. This is because the Join recipe only allows for the addition of two datasets at a time during the creation dialog, but more datasets can be added on the Join step.For instance, if there are four datasets to be joined, the first two can be joined together using the Join recipe. Then, the resulting dataset can be joined with the third dataset, followed by joining the resulting dataset with the fourth dataset. This way, all four datasets can be joined together.There is a possibility of using a single Join processor of the Prepare recipe for joining more than two datasets at a time, but only if it is a left join. However, this method is not advisable as it may result in inaccuracies and inconsistencies.The Join recipe is a recipe that enables the merging of two datasets into a single dataset based on a shared column. This recipe is useful for cleaning and integrating data from different sources into a single dataset. The Join recipe allows for the selection of the type of join to perform, such as inner join, left join, right join, and full outer join.The Prepare recipe is a recipe that is used to transform and clean datasets in preparation for analysis. This recipe allows for the selection of processors that carry out various functions such as renaming columns, filtering rows, and calculating new columns.

For mroe such questions on Datasets

https://brainly.com/question/4219149

#SPJ11

The maximum speed of the car is 66.83 km/h and the minimum speed of the car is 30.83 km/h.

Centrifugal force = friction force

mv²/r = μmgcosθ

μ = 0.35, g = 9.8m/s², θ = angle of banking angle

Maximum speed when the car moves too fast, it will slide away from the road. In this case, the frictional force will act outward against the motion of the car. This force will be directed as follows:

Friction force (f) = μNsinθ

where N = mg, Friction force (f) = 0.35 × 9.8 × cos (68/68) = 3.225 N

The maximum velocity of the car, that is, the velocity at which it will slide outward and upward from the road is:

vmax = √(μgr) = √(0.35 × 9.8 × 68) = 18.563 m/s = 66.83 km/h

Therefore, the car must move at a speed of 66.83 km/h or less, or it will slide away from the road.

Minimum speed when the car moves too slowly, it will move down the slope of the curve. In this case, the frictional force will act inward towards the car's motion. This force will be directed as follows:

Friction force (f) = μNsinθ = 3.225 N

The minimum velocity of the car, that is, the velocity at which it will slide outward and downward from the road is:

vmin = √(μgr) = √(0.35 × 9.8 × 68) = 18.563 m/s = 30.83 km/h

Therefore, the car must move at a speed of 30.83 km/h or more, or it will slide away from the road.

Learn more about Centrifugal force here:

https://brainly.com/question/17167298

#SPJ11

The car's interior, like the Earth's, absorbs visible light and infrared radiation, then emits infrared radiation back out.

c. Visible light and infrared rays can enter the car through the windows. Similar to how visible light and infrared radiation can pass through our atmosphere. a. Similar to how a car's exterior reflects some incoming radiation, the polar ice caps do the same. b. Just like the Earth, the interior of the car collects visible light and infrared radiation before reemitting it. d. The automobile gets hotter since none of the radiation can get through the windows. Similar to how part of the radiation that the Earth emits is trapped in the atmosphere, global warming results.

Order correctly: Visible light and infrared radiation can enter the car through the windows.

Learn more about car here:

https://brainly.com/question/11733094

#SPJ4

Length of the model Hm = 12 cm. The flow velocity Vm = 5 m/s. Frekuensi yang sesuai untuk skala penuh komponen struktural jembatan adalah 2,7 Hz.

To determine the length of the model, Hm, for geometric scaling, you must use the relationship Hm/H = Dm/D, where Dm is the model's diameter, D is the full scale structure's diameter, and Hm and H are the model and full-scale heights, respectively. Substituting in the given values, we have Hm/300 cm = 2 cm/20 cm, which can be solved for Hm to find that Hm = 12 cm.

To determine the flow velocity Vm for Reynolds number scaling, you must use the relationship Vm/V = sqrt(rhoH2O/rho)*(D/Dm), where rho is the air density and rhoH2O is the water density. Substituting in the given values, we have Vm/25 m/s = sqrt(1000 kg/m3/1.225 kg/m3)*(20 cm/2 cm). Solving for Vm, we find that Vm = 5 m/s.

To determine the shedding frequency for the full-scale structure of the bridge, we must use the relationship f/fmodel = (Vmodel/V)*(Dmodel/D). Substituting in the given values, we have f/27 Hz = (5 m/s/25 m/s)*(2 cm/20 cm). Solving for f, we find that the corresponding frequency for the full-scale structural component of the bridge is 2.7 Hz.

Learn more about the flow velocity: brainly.com/question/28595543

#SPJ11

The coefficient of static friction between its tires and the ground is 0.80.

To determine the coefficient of static friction between its tires and the ground, we can use the expression for the coefficient of static friction given by;

μ_s = (g * tan⁡θ) / (1 - (v²/r²))

Where;

μ_s = Coefficient of static friction

g = Acceleration due to gravity

θ = Angle of banking

r = Radius of the curve

v = Velocity of the vehicle

Substitute g = 9.8 m/s², θ = 0°, r = 100 m, and v = 25 m/s in the above expression.

μ_s = (9.8 * tan⁡0) / (1 - (25²/100²))

μ_s = 0.80

Hence, the coefficient of static friction is 0.80.

Learn more about coefficient of static friction here: https://brainly.com/question/25050131.

#SPJ11

If an electron at the surface of the negative plate were released from rest, its velocity would depend on the potential difference between the plates.

Potential difference (V) is the work done per unit charge. Its unit is volts (V). When a potential difference is applied between the two plates of a capacitor, the potential difference is given by the equation V = Q/C, where Q is the charge on the plates and C is the capacitance of the plates.If an electron is released from rest at the surface of the negative plate, it will move towards the positive plate. The potential difference between the two plates will create an electric field that will cause the electron to accelerate.

The acceleration of the electron is given by the equation a = F/m, where F is the force on the electron and m is its mass. The force on the electron is given by F = Eq, where E is the electric field strength and q is the charge on the electron. Therefore, the acceleration of the electron is given by a = Eq/m.After a time t, the velocity of the electron is given by v = at. Therefore, the velocity of the electron at any time t is given byv = (Eq/m)t.Note: It is important to note that this equation is only valid for small potential differences. If the potential difference is large enough, the electron may acquire relativistic velocities, and the equation will no longer hold.

Learn more about potential difference at:

https://brainly.com/question/16541033

#SPJ11

The current in the wire when a 0.900 V potential difference is maintained across a 1.50 m length of tungsten wire that has a cross-sectional area of 0.600 mm² can be calculated using Ohm's Law. The current through the wire is 0.643 A.

Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equation that describes this relationship:

I = V/R

where:

I = V/RI = (0.9 V)/(R)

The resistivity of tungsten is given by 5.6 x 10⁻⁸ Ωm.The formula for the resistance of the wire is given by

The resistance of the wire is 1.4 Ω.I = V/RI = (0.9 V)/(1.4 Ω)

The current through the wire is 0.643 A.

Learn more about Ohm's Law: https://brainly.com/question/14296509

#SPJ11

The flux through any closed surface surrounding a cylinder with height H and radius R having surface charge density σ = k sin φ, where k is a constant, is φ₀=2πRLk sin φ/ε₀.

Since the cylinder's surface charge density is given by σ = k sin φ

Therefore, the total charge on the cylinder's curved surface

Q = σ(2πRL)

Where L is the height of the cylinder, Q = 2πRLk sin φ .

From Gauss's Law, the total flux through a closed surface surrounding a cylinder with height H and radius R is given by φ₀=Qε₀ .Here, ε₀ represents the vacuum permittivity. Now, substituting the value of Q, we get

φ₀ = (2πRLk sin φ)/ε₀

Therefore, the flux through any closed surface surrounding a cylinder with height H and radius R having surface charge density σ = k sin φ, where k is a constant, is φ₀=2πRLk sin φ/ε₀.

Learn more about flux and surface charge density at: https://brainly.com/question/29665619

#SPJ11

When only one lightbulb blows out, an entire string of decorative lights goes out, which means that the lights in this string must be connected in series with one current pathway.

In a series circuit, the components are connected end to end in a single path, so the current flows through each component in turn. If one component, such as a lightbulb, fails, the circuit becomes incomplete, and the current cannot flow through any of the components downstream of the failed component. This results in all the lights in the series circuit going out when one lightbulb blows out.

In contrast, in a parallel circuit, the components are connected across multiple current pathways, so if one component fails, the current can still flow through the other components, and they will continue to function normally. Therefore, if one lightbulb blows out in a parallel circuit, the other lights will continue to work.

Learn more about the series circuit:

https://brainly.com/question/19865219

#SPJ11

The minimum height of the ladder needed by the rescuer for a successful rescue of the dog is 5.944 meters

To determine the minimum height of the ladder required for the rescuer and the dog to reach the other side of the river, use the conservation of energy principle. At the highest point of the swing, all of the gravitational potential energy of the system is converted into kinetic energy. At the lowest point of the swing, all of the kinetic energy is converted back into gravitational potential energy.

Let h be the height of the ladder above the rock where the swing is attached. Let v be the speed of the rescuer and the dog at the bottom of the swing, and let g be the acceleration due to gravity. Then, the conservation of energy equation is:

m_rgh + m_dgh = (m_r + m_d)gh' + (m_r + m_d)v²/2

where m_r and m_d are the masses of the rescuer and the dog, respectively, and h' is the height of the other side of the river.

We can solve for h' by rearranging the equation:

h' = [(m_r + m_d)gh + (m_r + m_d)v²/2 - m_rgh - m_dgh]/(m_r + m_d)

Substituting the given values:

h' = [(66.0 kg + 25.0 kg) × 9.81 m/s² × 5.0 m + (66.0 kg + 25.0 kg) × v²/2 - 66.0 kg × 9.81 m/s² × 5.0 m - 25.0 kg × 9.81 m/s² × 5.0 m]/(66.0 kg + 25.0 kg)

Simplifying the equation:

h' = (305.145 + 91.8725 - 323.46 - 122.625)/91 = 0.944 m

Therefore, the minimum height of the ladder that the rescuer must use is:

h - 5.0 m = 0.944 m

h = 5.944 m

So, the rescuer must use a ladder that is at least 5.944 meters high to swing over to the other side of the river with the dog.

Learn more on minimum height here: https://brainly.com/question/16672497

#SPJ1

Wind direction and speed, together with current, tides, vessel maneuverability, and the appropriate angle and speed, are the key factors to take into account when approaching a dock for a tie-up.

The wind's direction and speed, together with the current, tides, and the vessel's maneuverability, are the key factors to take into account when preparing a vessel's approach to a dock where you wish to tie up. To guarantee a secure tie-up, it is essential to approach the dock at the right angle and speed while taking these considerations into mind. The size and design of the dock, its height above the water, and the availability of mooring lines and fenders are also additional crucial factors. A good tie-up can also be attributed to effective communication and cooperation between the crew and any other people on the dock.

learn more about  vessel maneuverability here:

https://brainly.com/question/4197253

#SPJ4

The coordinated functions of the Nervous, Endocrine, and Reproductive systems are:

Coordinated functions refer to the integration and communication between different organs, systems, and tissues in the body to achieve a common goal or purpose. In biological terms, coordinated functions often involve multiple physiological systems working together to maintain homeostasis, respond to stimuli, or carry out complex behaviors or processes.

Examples of coordinated functions include the regulation of blood glucose levels by the pancreas and liver, the coordination of movement by the nervous and musculoskeletal systems, and the release of hormones by the endocrine system to control various physiological processes.

Learn more on coordinated functions here: https://brainly.com/question/15686131

#SPJ1

The question is:

"COORDINATED FUNCTIONS OF THE NERVOUS, ENDOCRINE, AND REPRODUCTIVE SYSTEMS"

Directions: Identify the part of the brain that is involved in each situation below. Write only the letter of your answer.

A. Amygdala

B. Brocka's Area

C. Cerebellum

D. Cerebrum

E. Hippocampus

F. Occipital Lobe

G. Hippocampus

H. Hypothalamus

I. Inferior Colliculus.

J. Thalamus

K. Pons

L Superior Colliculus

M. Pineal Gland

N. Wernicke's Area

O. Pituitary Gland

1. "My heart tells me that you are the one. I love you so much!"

2. "IAOCEVOY! I don't know what that means. It's all Greek to me!"

3. "Chartreuse, Olive,Turquoise, and Mint are all shades of green."

4. "Janna always wakes up at 4 in the morning, regardless of whether she uses an alarm clock or not."

5. "I don't remember the way going to Myla's house. Can you accompany me there?"

6. Jenny's mother is about to give birth, she complains about contraction and pain usually when the baby is kicking

7. "Anthony is a very skilled dancer. He just won the school hip hop dance competition last week."

8. "As Nica was walking on the road she readily moved to the side for she heard an incoming ambulance"

9. "Elsa loves making faces whenever she talks to her friends."

10. "Ryan usually talks about how happy his high school days were to his grandchildren."

When the big block of mass m(10kg) slides down a frictionless inclined at an angle 30 with the horizontal table, the speed of the block at the bottom of the incline is 3.14 m/s.

Given that

Mass of the block, m = 10 kg.

Angle of inclination, θ = 30°

Initial velocity, u = 0.

Frictional force, f = 0.

Using the formula for gravitational force, F = mg

where, g = 9.8 m/s² (acceleration due to gravity)

F = mg= 10 kg × 9.8 m/s²= 98 N

The component of gravitational force that acts parallel to the incline, Fsinθ is responsible for the acceleration of the block. Fsinθ = ma; Where a is the acceleration of the block.

a= (98 N)sin 30° / 10 kg= 4.9 m/s²

Using the formula for speed, v = u + at where,

u = initial velocity = 0m/s

t = time taken = time taken to slide from top to bottom of the incline.= √(2h/g) where,

h = height of the incline = 2 m (since the mass is at rest initially at the top of the incline).

Therefore, t = √(2 × 2 m / 9.8 m/s²)= 0.64 s

Substituting the values in the above formula, v = u + at= 0 + (4.9 m/s² × 0.64 s)= 3.14 m/s.

To know more about speed, refer here:

https://brainly.com/question/29309579#

SPJ11#

The velocity of the 3 kg ball after collision with the 8 kg ball is 2 m/s.

Velocity is the rate of change of displacement.

To calculate the velocity of the of the 3 kg ball after collision, we use the formula below.

Formula:

Where:

From the question,

Assuming: The bigger ball is initial traveling to the right and lets take right to be positive.

Given:

Substitute these values into equation 1 and solve for v

Hence, the velocity of the 3 kg ball is 2 m/s.

Learn more about velocity here: https://brainly.com/question/24445340

#SPJ1

Answer:

just write 6t and the same

Not enough information is given to determine whether the period would decrease, increase, or remain unchanged.

The period indicates the time required for a complete oscillation, the frequency indicates the number of oscillations that occur in one second, and the angular frequency indicates the magnitude of the rotational speed. 

The period of a pendulum comprised of a metal ball attached to a light string of length L undergoing simple harmonic motion is given by T = 2 π sqrt(L/g). If the ball is made positively charged and the pendulum is swung in an electric directed towards the center of the earth, then not enough information is given to determine whether the period would decrease, increase, or remain unchanged.

Learn more about The period of a pendulum: brainly.com/question/11746625

#SPJ11

If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north directions and The magnitude of the magnetic force is about 0.825 Newtons.

If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north. The magnitude of the force is given by the equation F = B × I × L, where B is the magnetic field strength, I is the current, and L is the length of the wire. In this case, the magnitude of the force is 0.825 N.
If the current is running vertically upward, then the direction of the force that our planet's magnetic field exerts on the cord is from east to west.

The magnitude of the force is again given by the equation F = B × I × L, so the magnitude of the force is 0.825 N.
If the current is running from north to south, then the direction of the force that our planet's magnetic field exerts on the cord is from west to east.
The magnitude of the force is again 0.825 N. The magnetic force is not large enough to cause significant effects under normal household conditions.

Learn more about Magnetic force here:

https://brainly.com/question/3160109

#SPJ11

None of the answer options provided are correct as they all involve calculations that assume certain values for the pressure, volume, and temperature of the gas.

What is Constant Pressure?

Constant pressure is a thermodynamic process in which the pressure of a system remains constant during the process. This means that any change in volume or temperature of the system must be accompanied by a corresponding change in some other property, such as the amount of heat added or removed from the system.

Since the gas is compressed at a constant pressure, the work done on the system can be calculated as:

W = -PΔV

In this case, P is constant, so we have:

W = -P(V2 - V1)

W = -P(4 m^3 - 10 m^3)

W = -P(-6 m^3)

W = 6P m^3

Since we are not given any information about the type of gas or its properties, we cannot use the ideal gas law to calculate the pressure P. Therefore, we cannot determine the exact value of the work done on the system.

Learn more about Constant Pressure from given link

https://brainly.com/question/2139620

#SPJ1

Without air resistance, both the basketball and the medicine ball will fall at the same rate and reach the ground at the same time. This is due to the fact that gravity affects objects the same, regardless of their mass.

When a ball is dropped from a height, the only force acting upon it is gravity. Gravity pulls each ball with the same force; however, the ball with more mass will have more gravitational potential energy than the other. It means the basketball will have more potential energy to convert to kinetic energy during the fall, making it faster than the medicine ball.

Thus, in conclusion, the basketball would fall first as it is more massive than the medicine ball.
When a basketball and a medicine ball are dropped from the same height at the same time without air resistance, the basketball would land first. The explanation for this is due to the size and weight of each ball.

Basketball is heavier than the medicine ball, and both have the same height to fall. The more massive the object, the more gravitational pull it experiences, and thus, it falls faster. So, the basketball would land first if a basketball and a medicine ball are dropped from the same height at the same time without air resistance.

Read more about mass here:

https://brainly.com/question/19385703

#SPJ11

The vertical and horizontal components of the pendulum's maximum displacement are 0.82 m and zero, respectively. No displacement occurs in the horizontal direction because the x-component is zero.



Mass of bullet, m = 29 g = 0.029 kg
Velocity of bullet, v = 210 m/s
Mass of pendulum, M = 3.2 kg
Length of pendulum, l = 2.9 m

Initial velocity of the bullet before colliding with the pendulum can be calculated as v = u + at ⇒ a = (v-u) / t

Here, u = 0 (initial velocity is zero)
t = time of flight of the bullet = 2.9 / (9.81) = 0.295 s
Hence, a = v / t = 210 / 0.295 = 712.71 m/[tex]s^2[/tex]

The momentum of the bullet just before hitting the pendulum can be given as:
p = m * v = 0.029 * 210 = 6.09 N s

Let us assume that after hitting the pendulum, the bullet and the pendulum stick together and move with a velocity 'V' (as shown in the figure).

Bullet and Pendulum moving together

According to the principle of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision:

(m * v) = (M + m) * V
⇒ V = m * v / (M + m)
⇒ V = 0.029 * 210 / (3.2 + 0.029)
⇒ V = 4.03 m/s

Now, the pendulum moves to a maximum height which can be calculated using the principle of conservation of energy:

Initial KE + Initial PE = Final KE + Final PE
1/2 * (M + m) * [tex]V^2[/tex] + 0 = (M + m) * g * h
⇒ h = [tex]V^2[/tex] / (2*g)
⇒ h = [tex]4.03^2[/tex] / (2*9.81)
⇒ h = 0.82 m

Part A: The vertical component of the pendulum's maximum displacement is 0.82 m.

Part B: The horizontal component of the pendulum's maximum displacement is zero.

The bullet hits the pendulum and gets embedded into it. After the collision, the bullet and the pendulum stick together and move with a common velocity 'V'.The pendulum moves to a maximum height of 0.82 m (which is the maximum displacement in the vertical direction). However, there is no displacement in the horizontal direction (i.e., the x-component of displacement is zero).

Learn more about displacement: https://brainly.com/question/248054

#SPJ11

The minimum number of polarizers required to make the transmitted light through all the polarizing sheets have an intensity that is less than 18% of that striking the first polarizer is four.

Using Malus' Law, determine the intensity of light transmitted through a polarizer that is rotated at an angle θ relative to the incident polarization of the light.

Malus' Law: I = I₀cos²θ, Where, I₀ is the initial intensity of the light and θ is the angle of rotation.

Calculate the light intensity transmitted through each polarizer.

I₀ = Intensity of polarized light incident on the first polarizer = 100% = 1

I = I₀ cos²19° = 0.818 I₀

I = I cos²19° = 0.667 I₀

I = I cos²19° = 0.544 I₀

I = I cos²19° = 0.443 I₀

I = 0.18 I₀, where I is the intensity of the transmitted light

Determine the minimum number of polarizers required.The transmitted light has an intensity of 18% of that striking the first polarizer. Since the intensity of transmitted light is reduced to 18% after the fourth polarizer, the minimum number of polarizers needed is 4.

Therefore, the minimum number of polarizers required to make the transmitted light through all the polarizing sheets have an intensity that is less than 18% of that striking the first polarizer is four.

Learn more about "polarizers" at : https://brainly.com/question/16106487

#SPJ11

The order of theoretically possible efficiency, from highest to lowest is Engine C, Engine B, and Engine A.

The theoretical efficiency of a Carnot engine is given by the formula:

Efficiency = 1 - T_{c} / Th

where Th and T_{c} are the temperatures of the hot and cold reservoirs, respectively.

Using this formula, we can calculate the efficiency of each engine.

For engine A, we have:

Efficiency = 1 - T_{c} / Th = 1 - 700 K / 1000 K = 0.3 or 30%

For engine B, we have:

Efficiency = 1 - T_{c} / Th = 1 - 500 K / 800 K = 0.375 or 37.5%

For engine C, we have:

Efficiency = 1 - T_{c} / Th = 1 - 300 K / 600 K = 0.5 or 50%

Therefore, the ranking of engines from highest to lowest theoretical efficiency is:  Engine C (50%) > Engine B (37.5%) > Engine A (30%)

To practice more questions about theoretical efficiency:

https://brainly.com/question/29339898

#SPJ11

We always see the same side of the Moon because the "Moon rotates on its axis once for each revolution around Earth." Thus, the correct option will be B.

When the Moon rotates on its axis once for each revolution around Earth, then we always see the same side of the Moon. The reason behind this is that the moon's rotation takes almost the same time as it takes to orbit the Earth.

When the same side of the moon is facing the Earth, it appears to be unchanging. That is why we always see the same side of the moon from Earth. The other side of the Moon is known as the far side, which was first observed by the Soviet spacecraft Luna 3 in 1959.

Therefore, the correct option will be B.

Learn more about Moon here:

https://brainly.com/question/13538936

#SPJ11

For a nonrelativistic electron and a nonrelativistic proton having the same de Broglie wavelength, we can say that: both particles have the same speed and both particles have the same momentum. The correct answers are Option A and E.

The de Broglie wavelength is defined as the wavelength of a particle, which is associated with its momentum. It is given by,

λ = h / p

where λ is the de Broglie wavelength, h is the Planck's constant and p is the momentum of the particle.

Therefore, if a nonrelativistic electron and a nonrelativistic proton have the same de Broglie wavelength, they must have the same momentum. This is because the momentum of the particle is inversely proportional to its wavelength.

The formula for the kinetic energy of a particle is given by,

K.E. = p² / 2m

where K.E. is the kinetic energy of the particle, p is the momentum of the particle and m is the mass of the particle.

Since the momentum of the electron and the proton is the same, the kinetic energy of the electron and the proton will depend on their mass. Therefore, it can be concluded that the electron will have more kinetic energy than the proton because the mass of the electron is much smaller than the mass of the proton.

Learn more about De Broglie theory here: https://brainly.com/question/20372425

#SPJ11

In comparison to radio waves in a vacuum, visible light in a vacuum has wavelengths that are shorter.

It is because the wavelength of visible light ranges from about 400 to 700 nanometers (nm), while radio waves can have wavelengths of up to kilometers.

When any wave travels through a vacuum, it maintains a constant speed of 299,792,458 meters per second (m/s). But the wavelength and frequency are inversely proportional to each other, so as the frequency of the wave increases, its wavelength decreases, and vice versa.

Hence, visible light with a higher frequency has a shorter wavelength than radio waves, which have a much lower frequency. Thus, the wavelengths of visible light in a vacuum are shorter as compared to radio waves in a vacuum.

To know more about wavelengths, refer here:

https://brainly.com/question/13533093#

SPJ11#