someone help plss 50 points and brilliant

To design a good test for this hypothesis, we need to first understand the hypothesis itself. Let's say that our hypothesis is that a certain medication reduces the symptoms of a particular disease. To test this hypothesis, we would need to design a study that meets the conditions specified in the question.

First, we need to ensure that our study is designed in a way that allows us to test the hypothesis in a controlled environment. This means that we would need to recruit participants who have the disease and randomly assign them to either the medication group or a placebo group. This will help us to control for potential confounding variables such as age, gender, and disease severity.

Next, we would need to measure the symptoms of the disease in both groups at the beginning of the study and at regular intervals throughout the study. This will allow us to compare the symptom scores between the two groups and determine whether the medication is having an effect.

To meet the conditions specified in the question, we would need to ensure that the evidence we collect is far more likely given that the hypothesis is true than it would be if the hypothesis were false. This means that we would need to calculate the probability of the evidence (i.e. symptom scores) given that the hypothesis is true (Pr(E|H)) and compare it to the probability of the evidence given that the hypothesis is false (Pr(E|~H)).

If the medication is truly effective, we would expect to see a significant difference between the symptom scores of the medication group and the placebo group. In this case, the evidence we collect would be far more likely given that the hypothesis is true than it would be if the hypothesis were false, meeting the first condition specified in the question.

To avoid potential confounders, we would need to ensure that our study is designed in a way that controls for other factors that could affect symptom scores. For example, we could control for diet and exercise habits, as well as other medications that the participants may be taking.

In conclusion, to design a good test for this hypothesis, we would need to design a controlled study that measures symptom scores in both the medication group and the placebo group, and calculate the probability of the evidence given that the hypothesis is true and false. We would also need to control for potential confounders to ensure that our results are valid.

Know more about hypothesis here:

https://brainly.com/question/29519577

#SPJ11

The number of hours it will take the airplane to fly the given distance would be = 4.5 hours

To calculate the number of hours that can be used for the distance, the following needs to be done. That is;

The number of hours it take to complete 3600 miles = 3 hours

Therefore the number of hours it will take to complete 5400miles = X hours.

That is;

3600 miles = 3 hours

5400 miles = X hours

make X the subject of formula;

X = 5400×3/3600

= 16,200/3600

= 4.5 hours.

Learn more about distance here:

https://brainly.com/question/26046491

#SPJ1

Answer:

Option (B) x = 15 , y = 7 , z = 5

Step-by-step explanation:

Options in the question:

(A) x = 10 , y = 27 , z = 5

(B) x = 15 , y = 7 , z = 5

(C) x = 15 , y = 7 , z = 8

(D) x = 12 , y = 7 , z = 4

For this question, Trial and Error meathod is easier to solve.

Numbers on the First Row = 4 , 1 , 6  |  97

Numbers on the Second Row = 1 , 5 , 1  |  55

Numbers on the Third Row = 8 , -1 , 1  |  118

We should multiply the values with a variable to all the numbers on each row. Except the fourth number.

So, it will become —

Numbers on the First Row = 4x , 1y , 6z  |  97

Numbers on the Second Row = 1x , 5y , 1z  |  55

Numbers on the Third Row = 8x , -1y , 1z  |  118

Now, we will add all the First number in all the rows.

So, it will become —

13x , 5y , 8z  |  270

Let’s use the Trial and Error meathod.

Option (A) says that

  (13 * 10) + (5 * 27) + (8 * 5) = 270

= 130 + 135 + 40 = 270

= 305 ≠ 270

So, Option (A) is incorrect.

Option (B) says that

  (13 * 15) + (5 * 7) + (8 * 5) = 270

= 195 + 35 + 40 = 270

= 270 = 270

So, Option (B) is correct.

We now already know the answer but we will continue all the options for clarification.

Option (C) says that

  (13 * 15) + (5 * 7) + (8 * 8) = 270

= 195 + 35 + 64 = 270

= 294 ≠ 270

So, Option (C) is incorrect.

Option (D) says that

  (13 * 12) + (5 * 7) + (8 * 4) = 270

= 156 + 35 + 32 = 270

= 223 ≠ 270

So, Option (D) is incorrect.

The remaining Option is Option (B) x = 15 , y = 7 , z = 5

Hope my answer helps you ✌️

The 95% confidence interval for the true proportion of tails in the population is (0.510, 0.572). This means that we are 95% confident that the true proportion of tails in the population is between 51.0% and 57.2%.

To find a 95% confidence interval for the true proportion of tails in the population, we can use the following formula:

[tex]CI = p + z\times (\sqrt{(p\times (1-p)/n))}[/tex]

Where:

p = the proportion of tails in the sample (541/1000 = 0.541)

z = the z-score associated with a 95% confidence level (1.96, since the distribution is approximately normal for large sample sizes)

n = the sample size (1000)

Substituting the values we have:

[tex]CI = 0.541 + 1.96\times (\sqrt{(0.541\times (1-0.541)/1000))}[/tex]

Simplifying:

CI = 0.541 ± 0.031

Therefore, the 95% confidence interval for the true proportion of tails in the population is (0.510, 0.572). This means that we are 95% confident that the true proportion of tails in the population is between 51.0% and 57.2%.

for such more question on confidence interval

https://brainly.com/question/14771284

#SPJ11

Therefore, the 90% confidence interval for the proportion of medical malpractice lawsuits that are dropped or dismissed is (0.635, 0.695).

To construct a confidence interval for the proportion of medical malpractice lawsuits that are dropped or dismissed, we can use the following formula:

CI = p ± z*sqrt((p*(1-p))/n)

where:

- p is the sample proportion of lawsuits that are dropped or dismissed (p = 732/1100 = 0.665)

- z* is the critical value of the standard normal distribution at a 90% confidence level (from a standard normal distribution table, z* = 1.645 for a 90% confidence level)

- n is the sample size (n = 1100)

Substituting the values into the formula, we get:

CI = 0.665 ± 1.645*sqrt((0.665*(1-0.665))/1100)

  = 0.665 ± 0.030

Therefore, the 90% confidence interval for the proportion of medical malpractice lawsuits that are dropped or dismissed is (0.635, 0.695). This means that we can be 90% confident that the true proportion of lawsuits that are dropped or dismissed is between 0.635 and 0.695.

For more details regarding lawsuits, visit:

https://brainly.com/question/30392587

#SPJ1

The area of the resulting surface is (2/3)π[tex](e^(3/2) - 2)[/tex], or approximately 58.87 square units.

To find the area of the resulting surface, we need to use the formula for surface area of a solid of revolution.

The formula is:

S = 2π∫[tex]a^b f(x)√(1 + [f'(x)]^2) dx[/tex]

Where a and b are the limits of integration, f(x) is the function being rotated (in this case, y = ex), and f'(x) is the derivative of f(x) with respect to x.

In this case, we have:

f(x) = ex
f'(x) = ex

So, the integral becomes:

S = 2π∫[tex]0^20 ex √(1 + e^2x) dx[/tex]

This integral can be solved using u-substitution, where [tex]u = 1 + e^2x.[/tex]

[tex]du/dx = 2e^2x \\dx = du/(2e^2x)[/tex]

So the integral becomes:

[tex]S = π∫1^e (1/2)(u-1/2) du\\S = π[(2/3)u^(3/2) - (2/3)]_1^e\\S = π[(2/3)e^(3/2) - (2/3) - (2/3)]\\S = (2/3)π(e^(3/2) - 2)\\[/tex]

Learn more about area here :-

https://brainly.com/question/13254462

#SPJ11

The amount of money in the account after 15 years is approximately $596.69.

Compounding refers to the process of earning interest not only on the original principal amount but also on the interest that accumulates over time.

Using the formula V = Pert for continuous compounding, where V is the value of the account in t years, P is the principal initially invested, e is the base of a natural logarithm, and r is the rate of interest, we have:

[tex]V = Pe^{(rt)[/tex]

Plugging in the given values, we get:

[tex]V = 352e^{(0.035\times 15)[/tex]

Simplifying and evaluating, we get:

V ≈ $596.69

Therefore, the amount of money in the account after 15 years is approximately $596.69.

To know more about compounding follow

https://brainly.com/question/22433698

#SPJ1

The length of the hypotenuse is 4.

Let the three sides of the right triangle be a, b, and c, where a is the shortest side, b is the middle side, and c is the hypotenuse. Since the sides form a geometric progression, we know that:

b/a = c/b

Multiplying both sides by b, we get:

[tex]b^2/a = c[/tex]

Since a = 2, we can substitute this into the above equation to get:

[tex]b^2/2 = c[/tex]

We also know that the Pythagorean theorem applies, so we have:

[tex]a^2 + b^2 = c^2[/tex]

Substituting a = 2 and [tex]c = b^2/2[/tex] , we get:

[tex]2^2 + b^2 = (b^2/2)^2[/tex]

Simplifying this equation, we get:

[tex]4 + b^2 = b^4/4[/tex]

Multiplying both sides by 4, we get:

[tex]16 + 4b^2 = b^4[/tex]

Rearranging and factoring, we get:

[tex](b^2 - 4)(b^2 - 12) = 0[/tex]

Since b is a positive length, we can discard the solution[tex]b^2 = 12.[/tex] Therefore, we have:

[tex]b^2 = 4[/tex]

Taking the square root of both sides, we get:

[tex]b = 2\sqrt{2 }[/tex]

Finally, we can use the equation [tex]c = b^2/2[/tex] to find the length of the hypotenuse:

[tex]c = (2\sqrt{2} )^2/2 = 4.[/tex]

For similar question on hypotenuse.

https://brainly.com/question/2217700

#SPJ11

We need to know the percentage of companies in the sample that are likely to require higher employee contributions in order to calculate the confidence interval.

Based on the information provided, we can calculate the margin of error and confidence interval for the proportion of companies likely to require higher employee contributions for health care coverage in the upcoming year. First, we need to know the sample size and the percentage of companies in the sample that are likely to require higher employee contributions. Unfortunately, this information is not given in the question. Without this information, it is impossible to calculate the margin of error and confidence interval. We need to know the sample size to determine the standard error of the proportion, which is necessary for calculating the margin of error. Additionally, we need to know the percentage of companies in the sample that are likely to require higher employee contributions in order to calculate the confidence interval.

Learn more about confidence interval here

https://brainly.com/question/20309162

#SPJ11

Thus, to calculate the probability of Derek selecting two striped socks at random, we need to know the number of striped socks and the total number of socks in his drawer. The formula to find the probability is (x/y) * ((x-1)/(y-1)).

To answer this question, we must first know the total number of socks in Derek's drawer and the number of striped socks among them.

The probability of selecting a striped sock can be calculated by dividing the number of striped socks by the total number of socks. Let's assume there are "x" striped socks and "y" total socks in the drawer.

For the first selection, the probability of choosing a striped sock is P1 = x/y.

After selecting one striped sock, there will be (x-1) striped socks and (y-1) total socks remaining in the drawer.
For the second selection, the probability of choosing another striped sock is P2 = (x-1)/(y-1).

To find the probability of selecting two striped socks in a row, we multiply the probabilities of each event occurring: P(both striped socks) = P1 * P2 = (x/y) * ((x-1)/(y-1)).

In summary, to calculate the probability of Derek selecting two striped socks at random, we need to know the number of striped socks and the total number of socks in his drawer. The formula to find the probability is (x/y) * ((x-1)/(y-1)).

Know more about the probability

https://brainly.com/question/24756209

#SPJ11

A large sample size and low variability increase the likelihood of rejecting the null hypothesis, while a small sample size and high variability decrease the likelihood of rejecting the null hypothesis.

When a sample is selected from a population and a treatment is administered, it is important to determine if the treatment had a significant effect on the sample. This is done by comparing the sample mean to the original population mean and testing if the difference is statistically significant.

If there is a 3-point difference between the sample mean and the original population mean, the likelihood of rejecting the null hypothesis depends on the characteristics of the sample. In particular, the size of the sample and the variability of the data can influence the likelihood of rejecting the null hypothesis.

If the sample size is large and the data is relatively homogeneous (low variability), then even a small difference between the sample mean and the population mean may be statistically significant. This is because a larger sample size allows for more precision in estimating the population mean and reduces the effect of random sampling error.

On the other hand, if the sample size is small and the data is highly variable, a larger difference between the sample mean and the population mean may be required to reject the null hypothesis. This is because a small sample size and high variability increase the uncertainty in estimating the population mean and make it more difficult to detect small differences.

In summary, when there is a 3-point difference between the sample mean and the original population mean, the likelihood of rejecting the null hypothesis depends on the sample characteristics, specifically the size of the sample and the variability of the data.

To know more about hypothesis, refer to the link below:

https://brainly.com/question/30821298#

#SPJ11

Step-by-step explanation:

well, look at it for a second and focus.

what do you see ?

I see a square, where 4 quarter-circles at the corners are removed.

4 quarter-circles = 1 full circle.

so, we need to calculate the area of the square and subtract the area of the circle. that's it.

area of the square :

6 × 6 = 36 m²

area of the circle :

pi × r²

r is the radius, which is half of the diameter. the diameter is 6 m (2 quarter-circles connected with each other).

so, the radius is 3 m.

and we get

pi × 3² = 9pi m² = 28.27433388... m²

the shaded area is then

36 - 28.27433388... = 7.725666118... m² ≈ 7.73 m²

i hope this helps you.

Based on the given information, it seems that the number of left-handed desks in each classroom is adequate.

Based on the given information, we can calculate the expected number of left-handed students in a classroom:

Expected number of left-handed students = (total number of students in a classroom) x (proportion of left-handed students in the population)

Expected number of left-handed students = 30 x 0.11

Expected number of left-handed students = 3.3

Since each classroom contains four left-handed desks, it seems that the number of left-handed desks is more than enough to accommodate the expected number of left-handed students. In fact, there may even be some unused left-handed desks in each classroom.

Therefore, based on the given information, it seems that the number of left-handed desks in each classroom is adequate.

for such more question on adequate

https://brainly.com/question/28033296

#SPJ11

The dimensions of the cylindrical mailing tube of greatest volume that may be mailed using the US Postal Service are approximately:

Diameter: 3.45 inches

Length: 18.7 inches
Volume: 123.8 cubic inches.

To find the dimensions of the cylindrical mailing tube of greatest volume that may be mailed using the US Postal Service, we need to consider the dimensional restrictions set by the Postal Service. According to their regulations, the length and girth (circumference plus the diameter) of a package must not exceed 108 inches combined.

Let's assume that the tube has a diameter of "d" and a length of "L". The girth of the package is the sum of the circumference of the circular ends and the diameter of the tube, so we have:

Girth = 2π(d/2) + d = πd + d

The length and girth must satisfy the inequality:

L + Girth ≤ 108

Substituting the expression for Girth, we get:

L + πd + d ≤ 108

Solving for L in terms of d, we get:

L ≤ 108 - (π + 1)d

Now, let's consider the volume of the cylindrical tube, which is given by:

V = πr²L = (πd²/4) L

Substituting the expression for L, we get:

V = (πd²/4) (108 - (π + 1)d)

To find the maximum volume, we can take the derivative of V with respect to d, set it equal to zero, and solve for d:

dV/dd = 0

d[πd²/4 (108 - (π + 1)d)]/dd = 0

πd/2 - 3π²d/4 - π/4 + 27/4 = 0

Solving for d, we get:

d = 27/(4π - 6π²)

Substituting this value of d back into the expression for L and the equation for the maximum volume, we get:

L = 108 - (π + 1)d ≈ 18.7 inches

V = (πd²/4) (108 - (π + 1)d) ≈ 123.8 cubic inches

Know more about cylindrical here:

https://brainly.com/question/28995951

#SPJ11

The true population mean of monthly incomes for workers in the factory falls between $1806 and $2263 with 98% of confidence intervals.

To calculate the 98% confidence interval for the mean of the population, we need to use the formula:

CI = sample mean ± Zα/2 * (σ/√n)

Where the sample mean, Zα/2 is the critical value for the given level of confidence (98% in this case), σ is the population standard deviation, and n is the sample size.

First, we need to find the sample mean from the given data:

sample mean = (2120 + 1980 + 2300 + ... + 1940) / 20 = 2034.5

Next, we need to find the critical value (Zα/2) using a standard normal distribution table or calculator. For a 98% confidence interval, the critical value is approximately 2.33.

Now, we can plug in the values and calculate the confidence interval:

CI = 2034.5 ± 2.33 * (518/√20) = (1806, 2263)

Therefore, we can say with 98% confidence that the true population mean of monthly incomes for workers in the factory falls between $1806 and $2263. This means that if we were to take many random samples of the same size from the population and calculate their confidence intervals, approximately 98% of these intervals would contain the true population mean.

To know more about confidence intervals, refer to the link below:

https://brainly.com/question/31420373#

#SPJ11

If a two-factor analysis of variance produces a statistically significant interaction, it means that the effect of one independent variable on the dependent variable changes depending on the level of the other independent variable.

In other words, the effect of one independent variable on the dependent variable is not the same across all levels of the other independent variable. Therefore, the interaction term is necessary to properly model the relationship between the independent variables and the dependent variable. It is important to interpret the interaction carefully to fully understand the relationship between the variables being studied.

Learn more about independent variable

https://brainly.com/question/29430246

#SPJ4

It will take 180 minutes to wash, dry, and fold four loads of laundry using a pipelining approach.

Using a pipelining approach for laundry, we can complete the tasks more efficiently by dividing them into stages. Let's break it down step by step:

1. Washing: Let's assume it takes 30 minutes to wash a single load of laundry.
2. Drying: Let's assume it takes 45 minutes to dry a single load of laundry.
3. Folding: Let's assume it takes 15 minutes to fold a single load of laundry.

Now, using the pipelining approach:

1. Load 1: Wash (30 minutes) → Dry (45 minutes) → Fold (15 minutes) = 90 minutes
2. Load 2: Wash (30 minutes) → Dry (45 minutes) → Fold (15 minutes)
3. Load 3: Wash (30 minutes) → Dry (45 minutes) → Fold (15 minutes)
4. Load 4: Wash (30 minutes) → Dry (45 minutes) → Fold (15 minutes)

The total time taken for four loads of laundry using a pipelining approach will be:
- Time to wash, dry, and fold Load 1: 90 minutes
- Time to wash Load 2: 30 minutes (as drying and folding of Load 1 can be done simultaneously)
- Time to wash Load 3: 30 minutes (as drying and folding of Load 2 can be done simultaneously)
- Time to wash Load 4: 30 minutes (as drying and folding of Load 3 can be done simultaneously)

Total time = 90 + 30 + 30 + 30 = 180 minutes

It will take 180 minutes to wash, dry, and fold four loads of laundry using a pipelining approach.

to learn more about Time click here:

brainly.com/question/29253427

#SPJ11

Based on this sample of 23 doors. Yes, there is evidence at the 0.05 level that the doors are too long and need to be trimmed

.Based on the given information, we can conduct a hypothesis test to determine if there is evidence at the 0.05 level that the doors are too long and need to be trimmed.

First, we need to set up our null and alternative hypotheses.

Null hypothesis: The mean height of the doors is equal to or less than 2058.0 millimeters.
Alternative hypothesis: The mean height of the doors is greater than 2058.0 millimeters.

We can use a one-sample t-test to test these hypotheses, since we have a sample mean and standard deviation.

Using a t-test calculator or software, we can find the t-value and the p-value. The t-value is calculated by:

t = (sample mean - null hypothesis mean) / (standard deviation / square root of sample size)

Plugging in the values, we get:

t = (2071.0 - 2058.0) / (29.0 / √23) = 4.06

Using a t-table or software, we can find the p-value associated with this t-value and degrees of freedom (df = n-1 = 22).

At a significance level of 0.05, our critical t-value is 1.717. Since our calculated t-value (4.06) is greater than the critical t-value, we can reject the null hypothesis.

The p-value associated with our t-value is very small, less than 0.0001. This means that there is strong evidence to suggest that the doors are too long and need to be trimmed.

Know more about hypothesis test here:

https://brainly.com/question/30588452

#SPJ11

If the sample selection was perfect, the difference between the sample and population averages would be zero.

We have,

The sample would be representative of the population, and the statistics calculated from the sample would accurately reflect the characteristics of the population.

However, in practice, it is often difficult to achieve a perfectly representative sample.

Sampling bias, which occurs when some members of the population are more likely to be selected than others, can lead to differences between the sample and population averages.

Therefore, it is important to use appropriate sampling techniques and methods to minimize sampling bias and ensure that the sample is as representative of the population as possible.

Thus,

If the sample selection was perfect, the difference between the sample and population averages would be zero.

Learn more about sample selection here:

https://brainly.com/question/29485238

#SPJ1

It is nonsensical to talk about the direction of specific differences in ANOVA because it is an omnibus test.

An omnibus test is a statistical test that evaluates whether there is a difference between groups or conditions, without specifying which groups or conditions differ from each other. In the case of ANOVA (Analysis of Variance), it tests whether the means of two or more groups are equal or not. However, it does not tell us which specific groups are different from each other.

Instead, to identify the specific group differences, post-hoc tests such as Tukey's test, Bonferroni's test, or Scheffe's test can be used. These tests compare the means of each group and identify which groups differ significantly from each other.

Therefore, talking about the direction of specific differences in ANOVA is nonsensical because ANOVA does not provide information about which groups differ from each other. It only tells us whether there is a significant difference between groups or not.

for such more question on omnibus test

https://brainly.com/question/26504675

#SPJ11

Answer:

  133 m²

Step-by-step explanation:

You want to know the area of a parallelogram with base 9.5 m and height 14 m.

The area is given by the formula ...

  A = bh

  A = (9.5 m)(14 m) = 133 m²

The area of the figure is 133 square meters.

__

Additional comment

The slant height (17 m) is irrelevant for finding the area.

<95141404393>

Find the area of the given figure

At first we have to identify the figure. This is a parallelogram.

Given:

To find :

Formula :

Solution:

We know

Area = Base × Height

Substituting the values we get

Area = 14 × 9.5

→ Area = 133 m²

Dakota rode his bike for 60 km. He understood that he could have been there 16 hours earlier if he had traveled 12 mph quicker. Dakota's actual speed during the bike ride was approximately 41.8 mph.

Let's assume that Dakota's actual speed during the bike ride was x miles per hour.

Using the distance formula:

distance = speed x time

We can calculate the time it took Dakota to complete the ride at his actual speed as:

60 = x * t

where t is the time in hours.

Now, according to the problem, if he had gone 12 mph faster, he would have arrived 16 hours sooner. This means that he would have covered the same distance in less time.

So we can set up another equation:

60 = (x + 12) * (t - 16)

Simplifying this equation:

60 = xt - 16x + 12t - 192

76 = xt - 16x + 12t

Substituting the value of t from the first equation, we get:

76 = 60 - 16x + 12(60/x)

Simplifying this equation:

[tex]16x^2 - 720x + 7200 = 0[/tex]

Dividing both sides by 16:

[tex]x^2 - 45x + 450 = 0[/tex]

Solving this quadratic equation using the quadratic formula:

[tex]$x = \frac{45 \pm \sqrt{45^2 - 41450}}{2}$[/tex]

[tex]$x = 22.5 \pm 7.5\sqrt{5}$[/tex]

We can reject the negative root because it doesn't make sense in the context of the problem.

To learn more about speed

https://brainly.com/question/28224010

#SPJ4

The means and standard deviation of the length of time that four randomly selected transistors will last are 3200 hours and 5 hours, respectively.

mean = 4 * 800 hours = 3200 hours.

The standard deviation of the length of time that four randomly selected transistors will last is equal to the standard deviation of a single transistor's lifetime divided by the square root of the sample size (which is 4), which is:

standard deviation = [tex]\frac{10}{\sqrt{4} }[/tex] = 5 hours.

Standard deviation is a measure of the amount of variation or dispersion of a set of data values around the mean. It is a statistical concept used in probability theory and statistics to measure the amount of spread or dispersion of a data set. The standard deviation is expressed in the same units as the original data and provides a measure of how tightly the data is clustered around the mean.

To calculate the standard deviation, you first find the mean of the data set. Then, for each data point, you find the difference between the data point and the mean. You square these differences, sum them up, and then divide by the number of data points minus one. The resulting value is the variance of the data set. The standard deviation is then calculated by taking the square root of the variance.

To learn more about Standard deviation visit here:

brainly.com/question/23907081

#SPJ4

The correct statement for the given quadratic equation x² - 6x + 2 = 0 is the graph of the quadratic equation has a minimum value. Hence, correct option is C.

The graph of the quadratic equation has a maximum or minimum value depending on the sign of the leading coefficient. In this case, the leading coefficient is positive, which means the graph of the quadratic equation opens upwards and has a minimum value.

The extreme value is not at the point (7,-3) or (3,-7) because those points are not on the graph of the equation.

The solutions of the equation can be found using the quadratic formula

x = [-(-6) ± √((-6)² - 4(1)(2))] / (2(1))

x = [6 ± √(28)] / 2

x = [6 ± 2√7] / 2

x = 3 ± √7

Therefore, the correct statement is C.

To know more about quadratic equation:

https://brainly.com/question/30098550

#SPJ1

The expected score for the optimal strategy is 4.25.

To determine the optimal strategy, we need to calculate the expected value of each option and choose the one with the higher expected value. Let's consider the two options:

Option 1: Keep the first roll

The expected score of this option is simply the average of all the possible outcomes of rolling the die once, which is (1+2+3+4+5+6)/6 = 3.5.

Option 2: Roll again

If we decide to roll again, we need to consider two possibilities:

We roll a value less than or equal to the first roll: In this case, we keep the first roll, and our score is the value of the first roll.

We roll a value greater than the first roll: In this case, we keep the second roll, and our score is the value of the second roll.

The probability of rolling a value less than or equal to the first roll is 1/2, and the probability of rolling a value greater than the first roll is also 1/2. Therefore, the expected score of this option is:

(1/2)(3.5) + (1/2)(1+2+3+4+5+6)/6 = (7/2 + 3.5)/2 = 5.25/2 = 2.625

Comparing the expected values of the two options, we can see that the expected value of rolling again is higher than the expected value of keeping the first roll. Therefore, the optimal strategy is to roll again if the first roll is less than or equal to 2.625, and keep the first roll otherwise.

The expected score for this optimal strategy can be calculated as follows:

If we roll a 1 or 2 on the first roll, we will roll again, and the expected score is (1+2+3+4+5+6)/6 = 3.5.

If we roll a 3, 4, 5, or 6 on the first roll, we will keep the first roll, and the expected score is the value of the first roll.

Therefore, the expected score for the optimal strategy is:

(1/6)(3.5) + (1/6)(3) + (1/6)(4) + (1/6)(5) + (1/6)(6) = 4.25

for such more question on optimal strategy

https://brainly.com/question/25821437

#SPJ11

The 90th percentile for the random sample of size 16 taken from the normal population with a mean of 100 and a variance of 4 is approximately 100.64

To find the 90th percentile of a random sample of size 16 taken from a normal population with a mean of 100 and a variance of 4, follow these steps:

1. Identify the population mean (μ) and variance ([tex]σ^{2}[/tex]). In this case, μ = 100 and [tex]σ^{2}=4[/tex].
2. Calculate the population standard deviation (σ) by taking the square root of the variance: σ = √4 = 2.
3. Since the sample size (n) is 16, the standard error (SE) is calculated by dividing the population standard deviation by the square root of the sample size: [tex]SE= \frac{σ}{\sqrt{n} } = \frac{2}{\sqrt{16} } = \frac{2}{4} = 0.5[/tex].
4. Next, determine the z-score corresponding to the 90th percentile. You can use a z-table or an online calculator. The z-score for the 90th percentile is approximately 1.28.
5. Multiply the z-score by the standard error: 1.28 (0.5) = 0.64.
6. Finally, add this product to the population mean: 100 + 0.64 = 100.64.

The 90th percentile for the random sample of size 16 taken from the normal population with a mean of 100 and a variance of 4 is approximately 100.64.

To know more about "mean" refer here:

https://brainly.com/question/31101410#

#SPJ11

The value of an 8 in the tens place as a fraction of an 8 in the hundreds place is 1 / 10.

In the number system we use, each digit's value is determined by its position and is ten times the value of the digit to its right. Therefore, the value of an 8 in the tens place is 10 times the value of an 8 in the ones place.

Likewise, the value of an 8 in the hundreds place is 10 times the value of an 8 in the tens place, which in turn is 10 times the value of an 8 in the ones place. Therefore, the value of an 8 in the hundreds place is 10 x 10 times the value of an 8 in the ones place.

So in equation form, we have:

= 8 / 80

= 1 / 10

Find out more on hundreds place at https://brainly.com/question/8103279

#SPJ1

To create a 90% confidence interval with a margin of error of 4%, the researcher should survey at least 424 students.

To calculate the sample size needed for a 90% confidence interval with a margin of error of 4% (0.04) when estimating the true proportion of students who have a job in addition to attending school, without a preliminary estimate, follow these steps:

1. Identify the desired confidence level (90%) and find the corresponding z-score (z-value). For a 90% confidence level, the z-score is 1.645.

2. Determine the margin of error, which is given as 4% or 0.04.

3. Since no preliminary estimate is available, use 0.5 (50%) as the proportion. This is the most conservative estimate and will result in the largest required sample size.

4. Use the formula for calculating the sample size (n) for proportions:

  n = (Z^2 * P * (1-P)) / E^2

  Where:
  - n is the required sample size
  - Z is the z-score (1.645 for a 90% confidence level)
  - P is the estimated proportion (0.5)
  - E is the margin of error (0.04)

5. Plug the values into the formula:

  n = (1.645^2 * 0.5 * (1-0.5)) / 0.04^2

6. Calculate the result:

  n ≈ 423.06

Since you cannot have a fraction of a student, round up the result to the nearest whole number:

  n = 424

Therefore, to create a 90% confidence interval with a margin of error of 4%, the researcher should survey at least 424 students.

to learn more about confidence interval click here:

brainly.com/question/17212516

#SPJ11

Answer:

Step 1: Identify the given solid figure. Step 2: Identify the faces and side lengths of the given solid figure. Step 3: Using the side lengths and shape of the faces, draw each face of the solid figure on a plane and mark the corresponding side length. You will get the net of the solid figure.

The number of divisors counted twice is equal to the number of positive integers that have the form [tex]$2^a\cdot 3^b\cdot 5^c$[/tex] for some nonnegative integers a, b, and c such that and [tex]0 \le c \le 5[/tex]. There are [tex]11\cdot 11\cdot 6 = 726[/tex] such divisors.

We will first find the prime factorization of each of the given numbers: [tex]\begin{align*}12^{12} &= (2^2\cdot 3)^{12} = 2^{24} \cdot 3^{12}, \10^{10} &= 2^{10} \cdot 5^{10}, \15^{15} &= (3\cdot 5)^{15} = 3^{15}\cdot 5^{15}.\end{align*}[/tex]

For a positive integer n to be a divisor of at least one of these numbers, it must contain some combination of the prime factors 2, 3, and 5.

Any divisor of [tex]12^{12}[/tex] must have the form [tex]2^a\cdot 3^b[/tex]for some nonnegative integers a and b such that [tex]0 \le a \le 24[/tex] and [tex]0 \le b \le 12.[/tex] Therefore, there are [tex]25\cdot 13 = 325[/tex]possible divisors of [tex]12^{12}.[/tex]

Similarly, any divisor of [tex]$10^{10}$[/tex]must have the form[tex]$2^a\cdot 5^b$[/tex]for some nonnegative integers a and b such that [tex]$0 \le a \le 10$[/tex] and [tex]$0 \le b \le 10$[/tex]. Therefore, there are [tex]$11\cdot 11 = 121$[/tex]possible divisors of[tex]$10^{10}$.[/tex]

Finally, any divisor of [tex]$15^{15}$[/tex]must have the form for some nonnegative integers a and b such that [tex]$0 \le a \le 15$[/tex] and [tex]$0 \le b \le 15$[/tex]. Therefore, there are [tex]$16\cdot 16 = 256$[/tex] possible divisors of [tex]$15^{15}$[/tex].

We want to count the total number of positive integers that are divisors of at least one of these numbers. Notice that we have counted some divisors twice (for example, [tex]$2^1 \cdot 3^1$[/tex]is a divisor of both [tex]$12^{12}$[/tex] and[tex]$10^{10}$)[/tex], so we need to subtract the number of divisors that we have counted twice. Similarly, we have counted some divisors three times, so we need to add the number of divisors that we have counted three times. We have not counted any divisor four or more times, so we do not need to consider those cases.

The number of divisors counted twice is equal to the number of positive integers that have the form [tex]$2^a\cdot 3^b\cdot 5^c$[/tex] for some nonnegative integers a, b, and c such that [tex]$0 \le a \le 10$[/tex], [tex]$0 \le b \le 5$[/tex], and [tex]$0 \le c \le 10$[/tex]. There are [tex]$11\cdot 6\cdot 11 = 726$[/tex] such divisors (we chose the exponents for 2, 3, and 5 separately).

Finally, the number of divisors counted three times is equal to the number of positive integers that

for such more question on integers

https://brainly.com/question/22008756

#SPJ11