some hikers set on a hike at noon. At some point, they turn around and follow the same path back to where began, and arrive there at 8:00pm. Their speed is 4mi/hr on level ground, 3mi/hr uphill and 6 mi/hr downhll. How many miles dyd they hike

Therefore, we would need to obtain at least 9604 grade-point averages to ensure that the sample mean is within 0.02 of the population mean with 95% confidence.

To determine the required sample size, we need to use the formula n = [(z * σ) / E]^2, where z is the z-score for the desired level of confidence (e.g. 1.96 for 95%), σ is the standard deviation of the population (which we don't know, so we can use a conservative estimate of 1), and E is the desired margin of error (0.02 in this case). Plugging in these values, we get n = [(1.96 * 1) / 0.02]^2 = 9604. So we would need to obtain at least 9604 grade-point averages to ensure that the sample mean is within 0.02 of the population mean with 95% confidence.
To determine the required sample size for standardizing grade point averages on a scale between 0 and 4 with a margin of error of 0.02, we can use the formula n = [(z * σ) / E]^2, where z is the z-score for the desired level of confidence, σ is the standard deviation of the population, and E is the desired margin of error. Assuming a 95% confidence level and a conservative estimate of σ = 1, we find that we would need at least 9604 grade-point averages to ensure that the sample mean is within 0.02 of the population mean.

Therefore, we would need to obtain at least 9604 grade-point averages to ensure that the sample mean is within 0.02 of the population mean with 95% confidence.

To learn more about the average visit:

https://brainly.com/question/20118982

#SPJ1

Based on the description of the drawing, the answer that best describes how the artist depicts the people on the poster is: "The woman is prepared to leave, but her husband is worried."

To identify the sentence that best describes the image we must carefully read the description of the image and identify each of the key factors described there. Once we make a mental image of the situation shown in the image, we can interpret the event that is occurring and select the most appropriate option.

In this case we must read the options and select the one that best suits the description, which would be: "The woman is prepared to leave, but her husband is worried." So, the correct option is C.

Learn more about posters in: https://brainly.com/question/8242738

#SPJ1

The power of the hypothesis test is approximately 0.296, or 29.6%. This means that there is a 29.6% chance of correctly rejecting the null hypothesis when the true mean lifetime is 50,000 miles.

The power of a statistical test is the probability of rejecting the null hypothesis when the alternative hypothesis is true. In this case, the null hypothesis is that the mean tire lifetime is at least 50500 miles, and the alternative hypothesis is that it is less than 50500 miles.

To calculate the power of the test, we need to know the true mean lifetime of the tires, which is given as 50000 miles. We also need to know the significance level of the test, which is 5%. This means that if we were to repeat the test many times, we would expect to make a Type I error (rejecting the null hypothesis when it is true) in 5% of cases.

Using a normal distribution with a mean of 50500 miles and a standard deviation of 5500 miles, we can calculate the test statistic for a sample size of 150 tires. The test statistic is:

t = (x - μ) / (s / √n)

where x is the sample mean, μ is the hypothesized mean (50500 miles), s is the standard deviation of the sample, and n is the sample size.

Since we are testing the hypothesis that the mean tire lifetime is less than 50500 miles, we are interested in the left-tailed test. The critical value of t for a one-tailed test with 149 degrees of freedom and a significance level of 5% is -1.655.

If the true mean lifetime is 50000 miles, then the distribution of sample means is centered at 50000 miles. The probability of getting a sample mean less than 50500 miles (the null hypothesis) when the true mean is 50000 miles is the probability of getting a sample mean that is more than 1.655 standard errors below the mean. This probability can be calculated using a standard normal distribution table or a calculator, and is approximately 0.04.

Therefore, the power of the test is 1 - 0.04 = 0.96, or 96%. This means that if the true mean tire lifetime is 50000 miles, we have a 96% chance of correctly rejecting the null hypothesis that the mean is at least 50500 miles, and concluding that it is less than 50500 miles.
To calculate the power of the hypothesis test, follow these steps:

1. State the null hypothesis (H0) and the alternative hypothesis (H1).
H0: μ ≥ 50,500 miles
H1: μ < 50,500 miles

2. Determine the significance level (α).
α = 0.05

3. Calculate the standard error of the sample mean.
Standard error (SE) = σ / √n = 5,500 / √150 = 449.44

4. Find the critical value (z-score) that corresponds to the 5% significance level.
Since it's a one-tailed test and α = 0.05, the critical z-score is -1.645.

5. Calculate the test statistic at the true mean (50,000 miles).
Test statistic (z) = (sample mean - true mean) / SE = (50,500 - 50,000) / 449.44 ≈ 1.11

6. Calculate the power by finding the probability of rejecting H0 when H1 is true.
Since the test statistic is 1.11 and the critical value is -1.645, we need to find the area to the left of -1.645 + 1.11 = -0.535. Using a standard normal table or calculator, the probability (power) is approximately 0.296.

The power of the hypothesis test is approximately 0.296, or 29.6%. This means that there is a 29.6% chance of correctly rejecting the null hypothesis when the true mean lifetime is 50,000 miles.

Learn more about null hypothesis at: brainly.com/question/28920252

#SPJ11

If the base of the solid is bounded by the curves f(x) = x2 and g(x) = x + 2 and the cross-sections perpendicular to the x-axis are rectangles of height 3 then the volume of the given solid is 9 cubic units.

The volume of the given solid can be found using the method of slicing, where we first determine the area of each cross-sectional rectangle and then integrate it over the specified region.

The base of the solid is bounded by the curves f(x) = x^2 and g(x) = x + 2. To find the region between these curves, we can set them equal to each other and solve for x:

x^2 = x + 2
x^2 - x - 2 = 0
(x - 2)(x + 1) = 0

This gives us two points of intersection: x = 2 and x = -1.

Now, let's find the length of the base of each rectangle, which is the difference between the y-values of the two curves:

Base length = g(x) - f(x) = (x + 2) - x^2

Since the height of each rectangle is given as 3, the area of each rectangle can be calculated as:

Area = Base length * Height = [(x + 2) - x^2] * 3

To find the volume of the entire solid, we integrate the area of the rectangles along the x-axis, between the intersection points -1 and 2:

Volume = ∫[3((x + 2) - x^2)] dx from -1 to 2

Evaluating this integral, we get:

Volume = 3[(x^2/2 + 2x - x^3/3)] from -1 to 2 = 9 cubic units

To learn more about rectangle  click here

brainly.com/question/29123947

#SPJ11

The probability of getting a return of 200% or more in a single year is approximately 0.0000317 or 0.00317%.

Assuming that the returns from holding small-company stocks are normally distributed, the probability of doubling or tripling your money in a single year can be estimated using the normal distribution formula.

To calculate the probability of doubling your money, you need to find the number of standard deviations away from the mean that represents a return of 100%. If we assume that the average return for small-company stocks is 10% per year with a standard deviation of 20%, we can use the formula:

Z = (100% - 10%) / 20% = 4.5

Using a normal distribution table or calculator, we can find that the probability of getting a return of 100% or more in a single year is approximately 0.0000317 or 0.00317%.

Similarly, to calculate the probability of tripling your money, you need to find the number of standard deviations away from the mean that represents a return of 200%. Using the same formula as above, we get:

Z = (200% - 10%) / 20% = 9.5

Using a normal distribution table or calculator, we can find that the probability of getting a return of 200% or more in a single year is approximately 0.000000002 or 0.0000002%.

It's important to note that these calculations are based on assumptions and estimates, and actual returns may vary significantly. Investing in small-company stocks involves significant risks, and investors should carefully consider their investment goals, risk tolerance, and overall financial situation before making any investment decisions.

To know more about probability, refer to the link below:

https://brainly.com/question/14188451#

#SPJ11

An integer C that will make the polynomial factorable 32 − 8 + C = 24

To make the polynomial 32 - 8 + C factorable,

we must use a quadratic trinomial - ax²+bx+c.

We can rewrite the polynomial as 24 + C.

For it to be factorable, C   should be equal to -24, so that the expression becomes 0 when x = 2.

Therefore, C = -24.

Proof:

32 - 8 + (-24) = 0

Note;

A polynomial is an expression in mathematics that consists of variables and coefficients and includes only the operations of addition, subtraction, multiplication, and non-negative integer exponentiation of variables.

Learn more about Polynomial:
https://brainly.com/question/11536910
#SPJ1


Full Question:

a)  Find an integer C that will make the polynomial below factorable
32 − 8 + C = ____

10b) Show that the integer C you found works by factoring the trinomial using the X that we learned in class.

The probability density function for a uniform distribution is given by f(x) = 1/(b-a). The height of the uniform distribution is 1/11.

a) The random variable in the context of this problem is Orv X - the waiting time for a randomly selected commuter on the Red Line during peak rush hours, which follows a uniform distribution between 0 minutes and 11 minutes.
b) The height of the uniform distribution can be computed as follows:
The probability density function for a uniform distribution is given by:
f(x) = 1/(b-a)
where a and b are the lower and upper limits of the distribution, respectively.
In this case, a = 0 and b = 11, so:
f(x) = 1/(11-0) = 1/11
a) In the context of this problem, the random variable (X) represents the waiting time for a randomly selected commuter on the Red Line during peak rush hours.
b) To compute the height of the uniform distribution, you'll need to use the formula:
Height = 1 / (b - a)
where 'a' represents the minimum waiting time (0 minutes) and 'b' represents the maximum waiting time (11 minutes).
Height = 1 / (11 - 0)
Height = 1 / 11
So, the height of the uniform distribution is 1/11.

Learn more about probability here

https://brainly.com/question/25839839

#SPJ11

The probable reason that 37 runners broke the four-minute mile barrier within one year after Roger Bannister originally did in 1954 was due to the psychological barrier being broken.

Before Bannister's accomplishment, many believed that running a mile under four minutes was impossible for a human being. However, once Bannister proved it could be done, it changed people's beliefs about what was possible and opened up new possibilities.

This change in belief and perception likely inspired other runners to push themselves harder and believe that they too could achieve this feat, leading to a rapid increase in the number of people breaking the four-minute mile barrier. Additionally, advances in training techniques and equipment may have also played a role in this increase.

for such more question on probable reason

https://brainly.com/question/13604758

#SPJ11

According to data from the Pew Research Center, there were approximately 10.5 million unauthorized immigrants living in the United States in 2017. This number represents around 25% of the total foreign-born population in the country. In conclusion, out of the 41.3 million foreign-born individuals in the U.S., about 10.5 million are considered unauthorized immigrants.

Unauthorized immigrants, also known as undocumented immigrants, are individuals who enter the United States without legal permission or overstay their visas. They are not eligible for most government benefits and are often subject to deportation if caught.

The Pew Research Center estimates that there were 41.3 million foreign-born individuals living in the United States in 2017, which includes both authorized and unauthorized immigrants. Of this population, around 10.5 million were unauthorized immigrants.

Unauthorized immigration is a complex and contentious issue in the United States, with many different opinions on how to address it. Understanding the size and characteristics of this population is an important part of any discussion or policy debate.

To know more about immigrants visit:

https://brainly.com/question/29998020

#SPJ11

The probability that the sample mean would differ from the population mean by more than 1.5 kilograms is 0.29 or 29%.

To answer this question, we need to use the central limit theorem, which states that the sample mean of a large sample size (n) will follow a normal distribution with a mean equal to the population mean (μ) and a standard deviation equal to the population standard deviation divided by the square root of n (σ/√n).

Given that the population mean weight is 7676 kilograms and the variance is 100100, we can calculate the population standard deviation by taking the square root of the variance, which gives us 316.23 kilograms.

Next, we need to calculate the standard error of the mean, which is the standard deviation of the sample mean. This can be done by dividing the population standard deviation by the square root of the sample size (142142 in this case), which gives us 2.65 kilograms.

Now we can calculate the z-score, which measures the number of standard errors the sample mean differs from the population mean. To do this, we divide the difference between the sample mean (7676 + 1.5 = 7677.5) and the population mean (7676) by the standard error of the mean (2.65), which gives us a z-score of 0.56.

Finally, we can use a normal distribution table or a calculator to find the probability that a z-score is greater than 0.56, which is approximately 0.29.

To know more about probability, refer to the link below:

https://brainly.com/question/19425113#

#SPJ11

The angles in DD and DMS

(a) sin−1 (0.5432) = 32° 36' 0"

(b) cos−1 (0.3165) = 71° 12' 0"

(c) tan−1 (1.1111) = 46° 24' 0"

(d) cot−1 (4) = 14° 0' 0"

(e) sec−1 (2.5) = 66° 24' 0

(f) csc−1 (1.25) = 51° 6' 0"

(a) The sine of an angle is opposite/hypotenuse. So, sinθ = 0.5432. Using the inverse sine function on a calculator, we get θ ≈ 32.6°. In DMS notation, this would be 32° 36' 0".

(b) The cosine of an angle is adjacent/hypotenuse. So, cosθ = 0.3165. Using the inverse cosine function on a calculator, we get θ ≈ 71.2°. In DMS notation, this would be 71° 12' 0".

(c) The tangent of an angle is opposite/adjacent. So, tanθ = 1.1111. Using the inverse tangent function on a calculator, we get θ ≈ 46.4°. In DMS notation, this would be 46° 24' 0".

(d) The cotangent of an angle is adjacent/opposite. So, cotθ = 4. Using the inverse cotangent function on a calculator, we get θ ≈ 14.0°. In DMS notation, this would be 14° 0' 0".

(e) The secant of an angle is hypotenuse/adjacent. So, secθ = 2.5. Using the inverse secant function on a calculator, we get θ ≈ 66.4°. In DMS notation, this would be 66° 24' 0".

(f) The cosecant of an angle is hypotenuse/opposite. So, cscθ = 1.25. Using the inverse cosecant function on a calculator, we get θ ≈ 51.1°. In DMS notation, this would be 51° 6' 0".

Learn more about angles here :-

https://brainly.com/question/13483158

#SPJ11

We would need approximately 51.75 pounds of seed (0.069 x 750) should be in the blend.

In order to determine how many pounds of each seed should be in the blend, we need to consider the relative importance of each factor - shade tolerance, traffic, and drought resistance. If all factors are equally important, we could simply divide the total weight of the blend (let's assume 100 pounds for simplicity) by the total number of points required (1450 points) to get the amount of each seed needed for one point. This would be approximately 0.069 pounds per point.

To calculate the amount of each seed needed for the specific score requirements, we would then multiply the required points for each factor by the amount needed per point. For shade tolerance (300 points), we would need approximately 20.7 pounds of seed (0.069 x 300).

For traffic (400 points), we would need approximately 27.6 pounds of seed (0.069 x 400). And for drought resistance (750 points), we would need approximately 51.75 pounds of seed (0.069 x 750).

Of course, it's possible that certain factors may be more important than others in a particular situation. In that case, we would need to adjust the amounts of each seed accordingly.

Additionally, other factors such as cost, availability, and compatibility with existing vegetation may also need to be considered when choosing the specific seeds to include in the blend.

To learn more about pounds, refer here:

https://brainly.com/question/29181271#

#SPJ11

The value of the test statistic is approximately 2.8

To determine the effectiveness of the advertising campaign at the fast-food restaurant, we can use the sample data and perform a hypothesis test using the test statistic. In this case, the terms you want me to include are: average daily sales, sample size, population standard deviation, and the test statistic.

The average daily sales before the campaign were $6,000 per day. After introducing the advertising campaign, a sample of 49 days of sales was taken, showing an average of $6,400 per day. The population standard deviation is $1,000.

To calculate the test statistic, we can use the following formula:

Test statistic = (Sample mean - Population mean) / (Population standard deviation / sqrt(Sample size))

Test statistic = ($6,400 - $6,000) / ($1,000 / sqrt(49))

Test statistic = $400 / ($1,000 / 7)

Test statistic = $400 / $142.86

Test statistic ≈ 2.8

So, the value of the test statistic is approximately 2.8. This test statistic can be used to determine the effectiveness of the advertising campaign by comparing it to a critical value or finding the p-value, which will help us understand if the observed increase in daily sales is statistically significant.

To learn more about standard deviations click here

brainly.com/question/23907081

#SPJ11

Thus, the cost of the triangular lot land is approximately $81,940 found using Heron's formula.

To determine the cost of the triangular lot, you first need to calculate its area and then convert it to acres.

Given the three sides of the triangle (470 yards, 860 yards, and 1130 yards), you can use Heron's formula to find the area.

Heron's formula for the area of a triangle with sides a, b, and c is:
Area = √(s * (s - a) * (s - b) * (s - c))

where s is the semi-perimeter, calculated as:
s = (a + b + c) / 2

In this case, a = 470 yards, b = 860 yards, and c = 1130 yards.

Therefore, the semi-perimeter, s, is:

s = (470 + 860 + 1130) / 2 = 1230 yards

Now, plug the values into Heron's formula to calculate the area:

Area = √(1230 * (1230 - 470) * (1230 - 860) * (1230 - 1130))
Area ≈ 198,342.77 square yards

To convert square yards to acres, use the conversion factor:

1 acre = 4,840 square yards
So, the area in acres is:

198,342.77 square yards * (1 acre / 4,840 square yards) ≈ 40.97 acres

Finally, multiply the area in acres by the price per acre to find the cost:
Cost = 40.97 acres * $2000 per acre ≈ $81,940

The cost of the land is approximately $81,940.

Know more about the Heron's formula

https://brainly.com/question/12454834

#SPJ11

1 the expected number of cartons sold in a day is approximately 3.339. 2 :The probability that the ice cream store sells more than half of its inventory in a day is 0.533, or 53.3%.(rounded to 3 decimals).

1. To find the expected number of cartons sold in a day, we'll need to calculate the expected value (E(x)) using the pdf, which is the derivative of the cdf, F(x).

First, we'll find the pdf, f(x):
f(x) = dF(x)/dx = (3x^2 + 1)/130 for 0 ≤ x ≤ 5

Now, we can calculate E(x):
E(x) = ∫(x * f(x) dx) from 0 to 5
E(x) = ∫(x * (3x^2 + 1)/130 dx) from 0 to 5

After solving the integral and evaluating the limits, we get:
E(x) ≈ 3.339

So, the expected number of cartons sold in a day is approximately 3.339.

2. To find the probability that the ice cream store sells more than half of its inventory in a day, we'll use the cdf, F(x):

P(X > 2.5) = 1 - F(2.5)

Using the given cdf function for 0 ≤ x ≤ 5:
F(2.5) = ((2.5)^3 + 2.5) / 130 ≈ 0.467

Now, we can find the probability:
P(X > 2.5) = 1 - 0.467 ≈ 0.533

So, the probability that the ice cream store sells more than half of its inventory in a day is approximately 0.533, or 53.3%.

Learn more about probability here:

https://brainly.com/question/11234923

#SPJ11

The statement describes the incidence measure of occurrence, which refers to the number of new cases of a disease or condition that occur in a defined population over a specific period of time.

This statement describes the incidence rate of flu among students living in Dunedin hostels.
The incidence rate is a measure of occurrence that calculates the number of new cases (in this case, students getting sick with the flu) in a specific population (150 students in Dunedin hostels) over a specific time period (3 months). This rate helps us understand the frequency at which the flu is affecting this particular group of students

For similar question on population.

https://brainly.com/question/28683624

#SPJ11

The stretch of the exponential decay function is y = (0.2)^x

From the question, we have the following parameters that can be used in our computation:

The graph

An exponential function is represented as

y = ab^x

Where

a = initial value i.e. a = y when x = 0

b = growth/decay factor

From the graph, we have

a = 1

Also from the graph, we have

b = 1/5

Evaluate

b = 0.2

This means that

The value of b is less than 1

So this case, the exponential function is a decay function

Recall that

y = ab^x

So, we have

y = 1(0.2)^x

Evaluate

y = (0.2)^x

Hence, the exponential decay function is y = (0.2)^x

Read more about exponential function at

brainly.com/question/2456547

#SPJ1

Due to the limited format of this platform, I cannot create full truth tables here. However, I will provide the expressions in both DNF (Disjunctive Normal Form) and CNF (Conjunctive Normal Form) for each of the given expressions.

a) x'y'z + x(z + yz')
DNF: x'y'z + xyz + xyz'
CNF: (x' + x)(y' + z)(y + z')(x + y + z')

b) zy + xy' + y'z
DNF: zy + xy' + y'z (already in DNF)
CNF: (x + z)(y + z)(y' + z')

c) x(wz + yz'w + yzw') + x'y'
DNF: xwz + xyz'w + xyzw' + x'y' (already in DNF)
CNF: (x' + x)(w + x)(z + y')(w' + y + z')

d) (xy + x'y')(zw + z'w') + xyw
DNF: xyw + x'y'z'w' + xyw' + x'y'zw (already in DNF)
CNF: (x + y + w)(x' + y' + z')(x + y + z')(x' + y' + w')

Remember that in DNF, expressions are written as a sum of products, and in CNF, they are written as a product of sums.

Know more about Disjunctive Normal Form here:

https://brainly.com/question/31416130

#SPJ11

Using the dual simplex method to find a solution to the linear programming problem formed by adding the constraint 3xi 5x3> 15 to the problem. The final solution is:
xi = 20
x2 = 0
x3 = 15
x4 = 0
x5 = 40

Adding the constraint 3xi + 5x3 > 15 does not affect the optimal solution, as none of the variables involved in the new constraint are in the basis. Therefore, the final solution remains the same.

To use the dual simplex method to find a solution to the linear programming problem formed by adding the constraint 3xi + 5x3 > 15 to the problem in example 2, we need to follow these steps:

1. Rewrite the problem in standard form by adding slack variables:
Maximize 4xi + 3x2 + 5x3
Subject to:
2xi + 3x2 + 4x3 + x4 = 60
3xi + 2x2 + x3 + x5 = 40
xi, x2, x3, x4, x5 >= 0

2. Calculate the initial feasible solution by setting all slack variables to 0:
xi = 0
x2 = 0
x3 = 0
x4 = 60
x5 = 40

3. Calculate the reduced costs of the variables:
c1 = 4 - 2/3x4 - 3/2x5
c2 = 3
c3 = 5 - 2/3x4 - 1/2x5
c4 = -2/3x1 - 1/2x2
c5 = -3/2x1 - 1/2x2

4. Choose the entering variable with the most negative reduced cost. In this case, it is x1.

5. Calculate the minimum ratio test for each constraint to determine the leaving variable:
For the first constraint: x4/2 = 30, x1/2 = 0, so x4 is the leaving variable.
For the second constraint: x5/3 = 40/3, x1/3 = 0, so x5 is the leaving variable.

6. Update the solution by performing the pivot operation:
- Pivot on x1 and x4 in the first constraint: x1 = 20, x4 = 0, x2 = 0, x3 = 15, x5 = 40/3
- Pivot on x1 and x5 in the second constraint: x1 = 0, x4 = 0, x2 = 0, x3 = 15, x5 = 40

7. Repeat steps 3-6 until all reduced costs are non-negative or all minimum ratio tests are negative.

Know more about constraint here:

https://brainly.com/question/30703729

#SPJ11

The height of the triangular face is 15 yards.

To find the height of the triangular face, we will use the formula for the volume of a triangular prism:
Volume = (1/2) * Base * Height * Length.

We are given the following values:
- Volume (V) = 720 cubic yards
- Length (L) = 8 yards
- Base (B) = 12 yards
We need to find the height of the triangular face (H).

Let's plug in the given values into the formula and solve for H:
720 = (1/2) * 12 * H * 8
First, simplify the equation:
720 = 6 * H * 8
720 = 48 * H
Now, divide both sides by 48 to find the value of H:
H = 720 / 48
H = 15 yards.

For similar question on triangular face.

https://brainly.com/question/16765719

#SPJ11

The factorization can be used to reveal the zeros of the function is the group method

To determine the zeros, we need to multiply the coefficient of the x squared by the constant value.

Then, find the pair factors of the product that add up to give -11

From the information given, we have ;

-12n^2-11n+15

Now, substitute the pair factors, we get;

-12n² - 9n + 20n + 15

Group in pairs

(-12n² - 9n ) + (20n + 15)

Factor the common terms

-3n(4n + 3) + 5(4n + 3)

then, we have;

-3n + 5 = 0

n = 5/3

4n + 3 = 0

n = -3/4

Learn about factorization at: https://brainly.com/question/25829061

#SPJ1

A one-to-one function is a function in which each input value (x) corresponds to exactly one output value (y) and vice versa. In other words, there are no repeating input values for different output values. Therefore  (h^-1 ◦ h)(-3) = h^-1 (-7) = (-7 - 2)/3 = -3

To find g^-1 (8), we need to find the input value (x) that corresponds to the output value (y) of 8 in the function g. Looking at the given function g, we can see that there is only one input value that corresponds to the output value of 8, which is -3. Therefore, g^-1 (8) = -3.

To find h^-1 (x), we need to solve for x in terms of y. Starting with the function h(x) = 3x + 2, we can rearrange it to get y = 3x + 2. Then, solving for x, we get x = (y - 2)/3. Therefore, h^-1 (x) = (x - 2)/3.

Finally, to find (h^-1 ◦ h)(-3), we need to first find h(-3) and then apply the inverse function h^-1 to the result. Using the function h(x) = 3x + 2, we can see that h(-3) = 3(-3) + 2 = -7. Then, applying the inverse function h^-1, we get (h^-1 ◦ h)(-3) = h^-1 (-7) = (-7 - 2)/3 = -3.

Learn more about function here :-

https://brainly.com/question/22340031

#SPJ11

The artifact was made approximately 2,159 years ago.

Carbon-14 has a half-life of about 5,700 years. Therefore, we can use the half-life formula to estimate the age of the wooden artifact:

[tex]A = A0(1/2)^{(t/T)}[/tex]

where:

A = the amount of carbon-14 remaining in the artifact (in this case, 60% of the amount in a living tree)

A0 = the original amount of carbon-14 in the artifact (in this case, 100% of the amount in a living tree)

t = the time elapsed since the artifact was made

T = the half-life of carbon-14

Substituting the values given in the problem, we have:

[tex]0.6 = 1(1/2)^{(t/5700)}[/tex]

Taking the natural logarithm of both sides, we get:

ln(0.6) = (t/5700)ln(1/2)

Solving for t, we get:

t = (ln(0.6)/ln(1/2)) × 5700

t ≈ 2,159 years

Therefore, the artifact was made approximately 2,159 years ago.

Learn more about radioactive isotope carbon-14.

brainly.com/question/9160615

#SPJ11

Caution is needed in interpreting the results of the three significant tests at the 5% level, as they may be due to chance or Type I errors, and may not be generalizable to other contexts or populations.

There are a few reasons why we should exercise caution when interpreting the results of the multiple hypothesis tests conducted in this study:

Type I error: When multiple hypothesis tests are performed, the probability of making at least one Type I error (rejecting a null hypothesis when it is actually true) increases. In this case, since 51 tests were performed, the probability of at least one Type I error is higher than if only one test had been conducted.

Multiple comparisons problem: The more tests that are conducted, the more likely it is that at least one test will produce a significant result purely by chance. This is known as the multiple comparisons problem. Even if a significant result is found, it may not necessarily be meaningful in the broader context of the study.

Replication: The study only surveyed students during the first few semesters that the courses were taught. It is important to replicate the study in other contexts and with different populations to determine whether the results hold up under different conditions.

for such more question on significant tests

https://brainly.com/question/14587073

#SPJ11

The function of 13 is  f(x) = -x -3

The function of 14  is f(X) = 3x-7

The function of table 15 f(x) = -2 + 16

Table 13 is a linear function.

the slope is -1 and the intercept at y-axis is -3

Thus, the function is  f(x) = -x -3

Table 14 the table here has a linear finction. where the slope is 3 and y-intercept is -7 hence,

the function is f(x) = 3x -7

Table 15: This is also a linear function with slope of -2 and y intercept of 16, so

the function f(x) = -2x + 16

Learn more about functions;
https://brainly.com/question/21145944
#SPJ1

Answer:

180

Step-by-step explanation:

i don't

Answer: 180 cedis

Step-by-step explanation: 4:6 is 40% for dora and 60% for dorris

The number of people on x tables is 2n + mx

From the question, we have the following parameters that can be used in our computation:

Tables = x

Represent the number of people on the middle tables with m

So, we have

Middle table = (x - 2) * m

Considering the first and the last tables have more people

Represent the additional number of people with n

So, we have

First and last = 2(m + n)

The number of people on x tables is

People = First and last + Middle table

This gives

People = 2(m + n) + (x - 2) * m

Expand

People = 2m + 2n + mx - 2m

Evaluate the like terms

People = 2n + mx

Hence, the number of people is 2n + mx

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

Mr. Krumm paid $9.27 for a tie that had a 3% sales tax added on. So, the tie cost $231.75 before the tax was included.

To find out how much the tie cost before the tax was included, we need to first calculate how much of the total price was due to the tax. We know that the total price Mr. Krumm paid was $9.27, and that this price included a $3% sales tax.

To calculate the amount of tax that was included in the price, we can start by setting up an equation:

0.03x = 9.27 - x

Here, x represents the cost of the tie before the tax was included. We know that the tax is 3% of this cost, which is why we're multiplying it by 0.03.. We're also subtracting x from 9.27 to get the amount of tax that was added on.

Simplifying this equation, we get:

0.04x = 9.27

Dividing both sides by 0.04, we get:

x = 231.75

So the tie cost $231.75 before the tax was included.

In summary, Mr. Krumm paid $9.27 for a tie that had a 3% sales tax added on. To find out how much the tie cost before the tax was included, we set up an equation and solved for the cost of the tie (x) before the tax was added. The answer is that the tie cost $231.75 before the tax was included.

Know more about the  sales tax

https://brainly.com/question/30109497

#SPJ11

The expected gain per play of this carnival game is -0.35 dollars (so it is more probably to lose money than to win it)

The expected gain per play is equal to the expected value minus the cost per game.

Here the expected value (or expected payout) is $0.15, and the cost per game is $0.50

Then the expected gain is given by the differene between these two values, we will get:

E = $0.15 - $0.50 = -$0.35

A negative expected gain means that we have an expected loss of 0.35 dollars. So that is the expected gan per play of this carnival game.

Learn more about expected values:

https://brainly.com/question/15858152

#SPJ1