Select the Ocean Basemap (Esri) from the Basemap drop-down menu at the top right. Also select the Regional Bathymetric Contours from the Options drop-down menu. Locate the divergent boundary that runs between the continents of South America and Africa. This boundary is known as the Mid-Atlantic Ridge.

Explore this boundary in the location where the two continents are closest, and zoom in until you can easily read the contour lines on the topographic map. Note that the numbers on the contour lines represent the depth of the ocean floor and are always positive. For example, 7,000 meters is deeper than 3,000 meters. Place your cursor or mouse in various locations along the plate boundary, and read the elevation in the map key at the bottom left. The elevation numbers can be negative, unlike the contour lines, so they will become more negative as the sea floor becomes deeper.

Gather information along this boundary and describe how the divergent motion of theses tectonic plates has shaped Earth’s features along this boundary. Provide evidence to support your answer.

Tetra chlorocarbon Carbon tournament is a colorless, non-flammable liquid with a strong, pleasant smell. Prior to 1970, both commercial and domestic usage of carbon tet as a cleaning agent was common.

The chemical compound known as carbon tetrachloride has the chemical formula CCl4. It is also referred to by several other names, including tetrachloromethane, which is also recognized by the IUPAC, graphite tet in the cleaning business, Halon-104 in firefighters, and Refrigerant-10 in HVACR.

Tetrachloromethane, commonly known as carbon tetrachloride, is a colorless, thick, very poisonous liquid that is volatile and nonflammable. It is a member of the family of chemical halogen compounds and is mostly used to make dichlorodifluoromethane, a refrigerant chemical propellant.

To know more about Carbon visit :

https://brainly.com/question/22530423

#SPJ4

The substance that is not a pure substance is the correct option is A. Aerated water.

A pure substance with the single kind of the atom is known as the element, and it cannot be broken into the two or more simple substances. The pure substance with the combination of the two or the more elements are the compounds.  The substances which contain the two or more substances together is called as mixture.

Thus, aerated water is not the pure substance. The carbon dioxide is the compound and the oxygen and the zinc are the purest form of the element.

To learn more about pure substance here

https://brainly.com/question/3696566

#SPJ4

Chemical substances that carry messages directly from one neuron to the next are called "Neurotransmitters." These chemical substances are important to our body.

Neurotransmitters are one of the body’s chemical substances. Neurotransmitters directly transmit messages from one nerve cell to the following neuron, muscle, or gland cell across a distance. The axon terminal, a component of the neuron, is where neurotransmitters are located. They are kept inside synaptic vesicles, which have thin walls. Numerous thousands of neurotransmitter molecules can fit inside each vesicle.

As a message or signal moves along a nerve cell, the electrical charge of the signal provokes neurotransmitter vesicles to fuse with the nerve cell membrane at the cell's very edge. The axon terminal is then distributed into a liquid area between one nerve cell and the next target cell.

Here to learn more about Neurotransmitters:

https://brainly.com/question/26387085

#SPJ4

The molality of an aqueous solution that is 6.2% by mass calcium chloride with 1.18 g/mL density is 0.0528 mol/kg.

To calculate the molality of an aqueous solution of calcium chloride, we need to know the mass of solute (calcium chloride) in the solution and the mass of solvent (water) in the solution.

First, let's convert the concentration from percentage by mass to grams of solute per kilogram of solvent:

6.2% = 6.2 g/100 g = 0.062 g/g = 0.062 g/1000 g = 0.062 g/kg

Next, we need to determine the mass of water in the solution. We can use the density of the solution to do this. Assuming the volume of the solution is 1 mL, we have:

mass of water = volume * density = 1 mL * 1.18 g/mL = 1.18 g

Finally, we can use the mass of solute and mass of solvent to calculate the molality:

molality = moles of solute / kilograms of solvent = 0.062 g / 1.18 g = 0.0528 mol/kg (rounded to four decimal places)

Learn more about molality here: https://brainly.com/question/26921570

#SPJ4

The catalyzed reaction: 2SO₂ + O₂ → 2SO₃, the catalyst in the reaction is the NO.

The catalyzed reaction is as :

2SO₂ + O₂ → 2SO₃,

Thought the following mechanism is as follows :

Step 1 : 2NO + O₂ → 2NO₂                               slow

Step 2 : 2NO₂ + 2SO₂ → 2NO + 2SO₃            fast

Therefore, The catalyst is the NO.

The intermediate in the mechanism is NO₂.

The rate of the reaction = Rate = k[NO]²[O₂] .

The substance that is increases the rate of the chemical reaction without  undergoing any of the permanent chemical change is called as catalyst.

To learn more about mechanism here

https://brainly.com/question/16023581

#SPJ4

Many chemicals that dissolve in liquid water become more soluble as the temperature rises.

Due to the gaseous solute's higher kinetic energy as temperature rises, the solute's solubility decreases. Because of this, its molecules have a higher chance of avoiding the solvent's molecule's attraction and returning to the gas phase. The kinetic energy of the solvent particles increases with temperature, allowing for efficient disintegration. The solubility is raised as a result of the efficient holding of the solute particles between the solvent molecules. The average kinetic energy of the molecules in the solution increases together with the rise in temperature. Because of this, the molecules can't keep together as well, which makes them more easily disintegrate. Because of this, solid states become more soluble as temperature rises.

Learn more about soluble here:

https://brainly.com/question/28170449

#SPJ4

Yes, the given statements are true. Worms are the simplest organisms that have a Nervous system, which is made up of a knot of nerve tissue found in the Brain.

Worms, like roundworms (Caenorhabditis elegans) and earthworms, have a basic sensory system comprising of an incorporated ganglion or bunch of nerve tissue, which fills in as a cerebrum, and an organization of nerve strands that run all through the body.

These nerve filaments answer various boosts, like touch, light, or vibrations, permitting the worm to recognize and answer changes in its current circumstance.

The presence of a sensory system in these straightforward organic entities upholds the possibility that the advancement of sensory systems was a significant stage in the improvement of mind-boggling living things.

Did you mean the given statements are True or False?

To learn more about worms:

https://brainly.com/question/13938105

#SPJ4

To Calculate an Effective Nuclear Charge is mentioned below.

What is nuclear charge?

All of the protons' combined charges make up the nuclear charge. Since effective nuclear charge considers all electron behavior, regardless of whether they are part of the valence shell or the inner shell, it should be used instead of nuclear charge.

What is charge?

A charged particle's ability to start an action or move an item is known as electrical energy. Electrical energy is produced as a result of electrons moving between atoms. Electrical energy is used to operate appliances like toasters and phone chargers every time you put them into a wall socket.

The net positive charge felt by the valence electrons is the effective nuclear charge. Zeff = Z - S, where Z is the atomic number and S is the quantity of shielding electrons, is an equation that can be used to calculate it roughly. Every element has a valence shell, which is its outermost shell.

Therefore, to Calculate an Effective Nuclear Charge is mentioned above.

Learn more about nuclear charge from the given link.

https://brainly.com/question/713760

#SPJ4

Since we are basing the rate with respect to O3, therefore the rate would simply be the concentration divided by the total reaction time. That is:

The order with regard to O3 is the rate law power of [O3], which is 2. The total of the powers in the rate law yields the overall order of reaction, which is 2 + (1 = 1).

NO2 is formed when NO(g) and O2(g) react (g). The reaction's rate law is rate=k[NO]2[O2]. Which of the following is the equation for the elementary step if the reaction occurs in a single elementary step that is a three-body molecular collision? 2NO+O2→2NO2.

Time = 16 seconds

[O3] = 0.05 M

[NO] = 0.01 M

The rate of the reaction with respect to O3 is

Rate =  Concentration / time

        = 0.05 M / 16 s

        = 0.00312 M / s

Learn more about initial rate

https://brainly.com/question/1906721

#SPJ4

Phytoplankton play an important role in the carbon cycle because A. photosynthesis by phytoplankton removes carbon from the atmosphere

Phytoplankton, which is microscopic aquatic plants, play a crucial role in the global carbon cycle. They perform photosynthesis, which is the process of using light energy to convert carbon dioxide and water into organic matter.

This process removes carbon dioxide from the atmosphere and converts it into biomass, which can then be used by other organisms or eventually sink to the ocean floor and is buried, removing carbon from the active carbon cycle.

Thus, phytoplankton plays an important role in regulating the amount of carbon dioxide in the atmosphere and mitigating the effects of climate change.

Read more about phytoplankton here:

https://brainly.com/question/15901563

#SPJ1

In the solid matter , atoms or the molecules are in the definite shape and the fixed volume.

In the solid state of the matter the particles are very close to each other. There is a very tiny gap between the particle, they are very tough to compress. The force of the attraction between the particles are very strong. The rate of diffusion in the solid matter is very low. The examples of the soli matter is sugar , wood, rock, solid ice.

Thus, in the solid state of the matter the molecules or the atoms have the fixed volume and have definite shape.

This question is incomplete , the complete question is :

In solid matter, atoms or molecules are in ----------- shape and --------  volume.

To learn more about solid here

https://brainly.com/question/30358572

#SPJ4

 40% of the weight of glucose (C 6 H 12 O) is made up of carbon.

Based on a scale where the atomic masses of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively, the total atomic mass of all the atoms that make up a molecule. For instance, water has a molecular weight of 18 (2 + 16), which is made up of two hydrogen atoms and one oxygen atom. Likewise known as molecular mass.

For carbon in glucose (c6h12o6), the calculation is as follows:

[tex]Percentagebyweight = (\frac{CarbonWeight}{GlucoseWeight} * 100) percent\\ = (\frac{72}{180} * 100) percent\\= 40 percent[/tex]

In conclusion,  40% of the weight of glucose (C 6 H 12 O) is made up of carbon.

In addition, the characterisation of supramolecular polymers depends heavily on the estimation of molecular weight. They are crucial for determining the level of polymerization, which can significantly affect the polymer's characteristics.

Learn more about molecular mass here https://brainly.com/question/14122402

#SPJ4

The sum of 7.0 ml, 8.45 ml, and 233 ml is 248.45 ml.

When rounded to the correct number of significant figures, the answer is 248 ml, which is rounded to the nearest whole number, since all of the values given have only one significant figure. Significant figures are the meaningful digits in a measurement, taking into account the precision of the measurement instrument used. In this case, all three values given have only one significant figure, so the final answer should be rounded to the nearest whole number, which is 248 ml. This rounded answer is the most appropriate representation of the sum of the three values, given the precision of the original measurements.

learn more about significant figures at:

https://brainly.com/question/29153641

#SPJ4

The stereoisomers of 2-chloro-5-methyl heptane Iis in the 2 chloro 5 methyl hectare.

In stereochemistry, stereoisomerism, or spatial isomerism, is a form of isomerism wherein molecules have an equal molecular method and series of bonded atoms, however, fluctuate inside the 3-dimensional orientations in their atoms in area.

Stereoisomers are isomers that fluctuate inside the spatial arrangement of atoms, in preference to the order of atomic connectivity. one in every of their most exciting sort of isomers is the replicate-image stereoisomer, a non-superimposable set of molecules that are a replicate image of one another. Stereoisomers are isomeric molecules with identical chemical formulas but exceptional atomic arrangements. for this reason, they own similar chemical and physical homes.

Learn more about stereoisomers here:-

brainly.com/question/24128816

#SPJ4

Because neurons are full of proteins that tend to be negatively charged, they tend to attract positively charged ions.

The interior of neurons is filled with a variety of proteins that have a negative charge. This negatively charged environment tends to attract positively charged ions, such as sodium (Na+) and potassium (K+) ions. The movement of these ions across the cell membrane and into the interior of the neuron is an important aspect of neuronal signaling and communication.

In neurons, the movement of positively charged ions is regulated by ion channels and pumps, which control the flow of ions in and out of the cell. This regulation is critical for maintaining the resting potential of the neuron and for transmitting signals along the length of the neuron. For example, when an electrical signal reaches the end of a neuron, the ion channels there open, allowing positively charged ions to flow into the cell. This creates a change in the electrical potential of the neuron that triggers the release of neurotransmitters, which can then activate other neurons or target cells.

In summary, the negatively charged environment inside neurons attracts positively charged ions, which play a crucial role in neuronal signaling and communication.

Learn more about neurons here:

https://brainly.com/question/29368083

#SPJ4

a) The molarity of base is 0.0795 Mol/dm^3

b) The Concentration of hydroxyl ion in g per 250 cm³ of the solution is  19.9 g

c) Mass of sodium tetraoxosulphate [VI] formed is 0.21 g

If we have that;

1.3 g of the acid is contained in the  250 cm³ solution

x is contained in the 1000 cm³ solution

x = 5.2 g/dm^3

Molar concentration of the acid =  5.2 g/dm^3/ 98 g/mol

= 0053 mol/dm^3

Then we have that;

CAVA/CBVB = NA/NB

Thus;

CAVANB = CBVBNA

CB = CAVANB/VBNA

CB = 0053  * 18.75 * 2/25 * 1

CB = 0.0795 Mol/dm^3

b) Concentration in gg per 250 cm³ of the solution = 0.0795 Mol/dm^3 * 1 dm^3 * 250cm^3

= 19.9 g

Number of moles of the acid = 0.0795 Mol/dm^3 *  18.75 /1000 L

= 1.49 * 10^-3 moles

c)  If 1 mole of the acid yields 1 mole of the salt 1.49 * 10^-3 moles

Then the mass of the salt = 1.49 * 10^-3 moles * 142 g/mol

= 0.21 g

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

The law of definite proportions asserts that the constituents of a chemical compound are often present in a fixed and definite mass ratio. This indicates that regardless of the quantity or source of a chemical compound, the ratio of its different components will always be the same.

According to the law of definite proportions, the ratio of the components in a chemical compound is always the same, regardless of the compound's source or quantity. As a result, if the results of the decomposition experiments demonstrate that the magnesium-to-nickel ratio in the metallic complex is not the same in each sample, then those data sets are inconsistent with the law of definite proportions. For example, if a metallic compound comprises magnesium and nickel, the ratio of magnesium to nickel in the compound will always be the same, regardless of how much of the compound is made or where it is obtained.

To know about Compound, click here: brainly.com/question/14658388

#SPJ4

Trixie Bell consumes 96.28 g of protein daily.

First, let's calculate the amount of protein in the grain Trixie Bell consumes daily. If 0.75 lb of grain contains 14% digestible protein, that means 0.75 lb x 14% = 0.105 lb of protein in the grain.

Next, let's calculate the amount of protein in the hay Trixie Bell consumes daily. If 4.25 lbs of hay contain 2.5% digestible protein, that means 4.25 lbs x 2.5% = 0.10625 lb of protein in the hay.

Finally, let's add up the amount of protein in both the grain and hay to find the total amount of protein Trixie Bell consumes daily. So, 0.105 lb + 0.10625 lb = 0.2125 lb of protein daily.

To convert pounds to grams, we multiply by 453.59: 0.2125 lb x 453.59 g/lb = 96.28 g of protein daily.

Therefore, Trixie Bell consumes 96.28 g of protein daily.

To learn more about protein:

https://brainly.com/question/884935

#SPJ4

The molecule believed to have been the most important to the early protobionts is RNA.

RNA is believed to be the first functional macromolecule in protobionts because it is easier to synthesize than other macromolecules, has the ability to act as a catalyst, and can store genetic information. It is believed that RNA was the first molecule to form the basis for the earliest forms of life on Earth.

Protobionts are systems that are considered to have possibly been the precursors to prokaryotic cells. A protobiont is an aggregate of abiotically produced organic molecules surrounded by a non-unit membrane. This membrane provides a compartment for the molecules to interact and form more complex structures.

Learn more about protobionts

https://brainly.com/question/8135893

#SPJ4

1. The motion of the electrons in the Rutherford model was stable. F

2. The energy of an electron depends on the size of the orbit and is lower for smaller orbits. T

The model depicted the atom as a tiny, dense, positively charged core called a nucleus, in which nearly all the mass is concentrated, and around which the light, negative constituents known as electrons circulate at some distance, similar to planets revolving around the Sun.

3. The magnitude of the wave function at a particular point in space is inversely proportional to the amplitude of the wave at that point. F

4. The azimuthal quantum number (l)tells the average relative distance of an electron from the nucleus. T

5. The Magnetic quantum number (ml) describes the orientation of the region in space occupied by an electron with respect to an applied magnetic field. F

Thus, The motion of the electrons in the Rutherford model was not stable.

To learn more about the Rutherford model, follow the link;

https://brainly.com/question/11749615

#SPJ1

The density of osmium is reported by one source to be 22610 kg/m3.

The mass of a solid substance in relation to its volume is its density. The equation for density is D = M/V, where M represents mass and V is volume. A common unit of measurement for density is grammes per cubic centimetre.

Its density determines how much "stuff" can fit into a given amount of space. An example is that a block of the harder, lighter element gold (Au) will have a higher density than a block of the heavier element lead (Pb) (Au). Compared to bricks, Styrofoam blocks are less dense. It is defined as mass per unit of volume.

Learn more about Density here:

https://brainly.com/question/1354972

#SPJ4

20.22 volume of 0.1379 M HCl is required to neutralize 10.0 ml of 0.2789 M NaOH solution.

Sodium hydroxide (NaOH) and Hydrochloric acid (HCl) react in a 1:1 mole ratio to produce an aqueous sodium chloride (NaCl) and water.

NaOH (aq) + HCl (aq) → NaCl (aq) + H₂O (l)

Molarity is termed as the number of moles of the solute present in 1 L of solution.

The sodium hydroxide solution, which has a molarity of 0.2789 M is

0.2789 / 0.1379 = 2.022

times more concentrated than the hydrochloric acid solution, which has a molarity of 0.1379 M. In other words, for the same volume of both solutions, the sodium hydroxide solution contains 2.022 times  more moles of solute than the hydrochloric acid solution.

Since the sodium hydroxide solution has a volume of 10.0mL, it follows that the volume of hydrochloric acid needed will be

[tex]V_{HCl}[/tex] = 2.022 × 10.0

= 20.22 mL

To know more about molarity here

https://brainly.com/question/8732513

#SPJ4

180 u is the molecular mass of glucose C6H12O6 molecule

What is molecular mass ?

Molar mass is the mass of one mole of a substance, defined as its atomic or molecular mass in grams.  It is defined as the number of units (atoms, molecules, ions, etc.) in a substance that contains the same number of units as 12 grams of pure carbon-12. The molar mass of a substance is important because it provides a conversion factor between the  mass of a substance and the number of moles of a substance, allowing chemical reactions and composition of compounds to be more easily calculated. Molar mass can be calculated by summing the atomic masses of all atoms in a molecule of a substance. For example, the molar mass of water (H2O) is 18.015 g/mol. This means that 1 mole of water weighs 18.015 grams .

To know more about molecular mass , click the link below ;

https://brainly.com/question/837939

#SPJ4

We are given information about a patient's body fluids and their volumes of distribution, as well as their osmolarity. We are then asked to calculate the effects of different scenarios on the water and solute levels in the patient's ECF (Extracellular Fluid) and ICF (Intracellular Fluid).

The osmolarity of a patient's body fluid is a measure of the total concentration of solute particles in the fluid and is calculated in osmoles per litre (OsM). To calculate the osmolarity, we multiply the concentration of each solute by its corresponding volume of distribution and then sum the results. In this case, the osmolarity of the patient's body fluid is 0.295 OsM.

To determine the amount of solute (osmoles) in each compartment, we multiply the osmolarity by the volume of distribution for each compartment. For the deuterium oxide, there are 42 litres * 0.295 OsM = 12.39 osmoles. For inulin, there are 13 litres * 0.295 OsM = 3.785 osmoles. For Evans blue, there are 2.8 litres * 0.295 OsM = 0.82 osmoles.

When the patient ingests 1 L of water, the total volume of ECF increases, but the osmolarity remains the same. This means that the volume of ICF decreases to maintain the osmotic balance. Therefore, the volume of ECF increases to 43 litres, while the volume of ICF decreases to 11 litres. The osmolarity of both compartments remains the same at 0.295 OsM.

When the patient ingests 0.18 moles of NaCl, the NaCl dissociates into Na+ and Cl- ions. These ions will move freely between the ECF and ICF to maintain osmotic balance. Since the ECF has a larger volume, most of the ions will end up in the ECF, causing its osmolarity to increase. Therefore, the volume of ECF remains the same, but its osmolarity increases to 0.6 OsM. The volume of ICF decreases to 11 litres, and its osmolarity decreases to 0.09 OsM.

When the patient receives an intravenous infusion of 2 L of 0.9% NaCl solution, the volume of ECF increases, and its osmolarity increases. The volume of ECF increases to 45 litres, and its osmolarity increases to 1.095 OsM. The volume of ICF decreases to 9 litres, and its osmolarity decreases to 0.07 OsM.

To learn more about osmolarity here:

https://brainly.com/question/29698326#

#SPJ11

Considering the solutions: 0. 04 m acetone [(ch3)2c=o)], 0. 04 m agno3 and 0. 04 m cacl2,

The osmotic pressure is the least amount of pressure that must be applied to a solution in order to block the passage of the solution's pure solvent through a semipermeable membrane.

Reducing the amount of solvent molecules that escape into the vapour phase also reduces the pressure that the vapour phase exerts. This is referred to as a relative decrease in vapor pressure.

Any material's boiling point is the temperature at which it changes from the liquid phase into the gas phase. For water, this occurs at 100 degrees Celsius.

Learn more about Solution problems:

https://brainly.com/question/14153986

#SPJ4

The pH of a 0.5 M solution of sodium bisulfate ([tex]NAHSO_{4}[/tex]) is approximately 1.

pH is a measure of the acidity or basicity of a solution, with a pH of 7 considered neutral, a pH less than 7 considered acidic, and a pH greater than 7 considered basic. The pH is determined by the concentration of hydrogen ions (H+) in the solution.

Sodium bisulfate ([tex]NAHSO_{4}[/tex]) is a strong acid, meaning that it dissociates completely in water to form hydrogen ions (H+) and sulfate ions ([tex]SO_{4} ^{2-}[/tex]). The concentration of hydrogen ions in a 0.5 M solution of sodium bisulfate is equal to the concentration of the bisulfate ions, meaning that the pH of the solution would be around 1.

To learn more about pH, visit:

https://brainly.com/question/15289714#

#SPJ11

Answer:rusting is irreversible because the oxygen in the air reacts with the material and causes a chemical reaction

Explanation:

its not reversible because nothing you can do will make it bring back the material besides like rust treatment which a body shop does and they have to add material back to the spot

Yes, that's correct. The chemical formula "[tex]BaCl_2[/tex]" represents the ratio of the elements in the compound barium chloride. In this case, it means there is one barium (Ba) atom and two chlorine (Cl) atoms in each representative unit of the compound.

What is the chemical formula?

The term chemical formula has to do with the way that the atoms that compose the substance are arranged. The arrangement of the atoms in the chemical substance would help us to have an idea of how the compound appears.

Now we are looking at the compound barium chloride of which we know that it is an ionic subsnace and since the substance is ionic in nature, we would talk about a formula unit of the compound as beings its representative unit in the crystal lattice of the substance.

The question above is incomplete, the complete question is:

The formula for barium chloride is BaCl2. The chemical formula for barium chloride shows the number of ___________ of each element in the ___________ representative unit of the substance.

Here you can learn more about the chemical formula

brainly.com/question/29519054

#SPJ4