Sebastian has a beaker of 100 ml of water and a beaker of 500 ml of water. He is trying to
determine how the boiling point will be affected by the different amounts of water. He knows
that boiling point is a physical property of matter. What can he conclude about the boiling
point of the 2 beakers of water?
A. The 2 beakers of water will have different boiling points because the boiling point of water
is a physical property and the property is independent of the amount of water.
B. The 2 beakers of water will have the same boiling points of 100 degrees Celsius because
the boiling point of water is a physical property and the property is independent of the
amount of water.
C. The 2 beakers of water will have different boiling points because the boiling point of water
is a physical property and the property is dependent of the amount of water.
D. The 2 beakers of water will have different boiling points of 100 degrees Celsius and 500
degrees Celsius because the boiling point of water is a physical property and the property

Answer:

214.77 g/mol

Explanation:

Tin(II) sulfate

From Wikipedia, the free encyclopedia

Jump to navigationJump to search

Tin(II) sulfate

Tin(II) sulfate crystallizes in an heavily distorted barium sulfrate structure.

Unit cell of tin(II) sulfate.

Names

Other names

Stannous sulfate

Identifiers

CAS Number  

7488-55-3 ☑

3D model (JSmol)  

Interactive image

ChemSpider  

21106484 ☑

ECHA InfoCard 100.028.457 Edit this at Wikidata

EC Number  

231-302-2

PubChem CID  

62643

UNII  

0MFE10J96E ☑

CompTox Dashboard (EPA)  

DTXSID20884389 Edit this at Wikidata

InChI[show]

SMILES[show]

Properties

Chemical formula SnSO4

Molar mass 214.773 g/mol

Appearance white-yellowish crystalline solid

deliquescent

Density 5.15 g/cm3

Melting point 378 °C (712 °F; 651 K)

Boiling point decomposes to SnO2 and SO2

Solubility in water 33 g/100 mL (25 °C)

Structure[1]

Crystal structure Primitive orthorhombic

Space group Pnma, No. 62

Lattice constant  

a = 8.80 Å, b = 5.32 Å, c = 7.12 Å[2]

Hazards

NFPA 704 (fire diamond)  

NFPA 704 four-colored diamond

010

Flash point Non-flammable

Lethal dose or concentration (LD, LC):

LD50 (median dose) 2207 mg/kg (oral, rat)

2152 mg/kg (oral, mouse)[3]

Related compounds

Other anions Tin(II) chloride, tin(II) bromide, tin(II) iodide

Other cations Lead(II) sulfate

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Tin(II) sulfate (SnSO4) is a chemical compound. It is a white solid that can absorb enough moisture from the air to become fully dissolved, forming an aqueous solution; this property is known as deliquescence. It can be prepared by a displacement reaction between metallic tin and copper(II) sulfate:[4]

Sn (s) + CuSO4 (aq) → Cu (s) + SnSO4 (aq)

Tin(II) sulfate is a convenient source of tin(II) ions uncontaminated by tin(IV) species.

Answer: Ions are formed by the addition of electrons to, or the removal of electrons from,

Explanation:

Volume of Ba(OH)₂ : 0.363 L

Balanced equation :

H₂(g)+S(s)+2OH⁻(aq)⇒ S²⁻(aq)+2H₂O(l) (eq 1)

Ba(OH)₂⇒Ba²⁺+2OH⁻ (eq 2)

mol S :

[tex]\tt \dfrac{3~g}{32~g/mol}=0.09375[/tex]

mol OH from eq 1 : (mol S : mol OH = 1 : 2)

[tex]\tt \dfrac{2}{1}\times 0.09375=0.1875[/tex]

mol Ba(OH)₂ from eq 2 : (mol Ba(OH)₂ : mol OH⁻=1 : 2)

[tex]\tt \dfrac{1}{2}\times 0.1875=0.09375[/tex]

volume of Ba(OH)₂ :

[tex]\tt Volume =\dfrac{mol}{M}=\dfrac{0.09375}{0.258}=0.363 L[/tex]

Answer:What volume of 9.00 M nitric acid is needed to make 6.50 L of 1.25 M solution? 903 mL What molarity should the stock solution be if you want to dilute 25.0 mL to 2.00 L and have the final concentration be 0.103 M?

Explanation:

Answer:

The second choice and the fourth choice are both based on science fact. The others are examples of pseudoscience.

Answer:

Porque las moléculas de glucosa son salvajes

Explanation:

Answer:

Glucose cannot move across a cell membrane via simple diffusion because it is simple large and is directly rejected by the hydrophobic tails. Instead it passes across via facilitated diffusion which involves molecules moving through the membrane by passing through channel proteins.

Explanation:

Answer:

10 kg of ice will require more energy than the released when 1 kg of water is frozen because the heat of phase transition increases as the mass increases.

Explanation:

Hello!

In this case, since the melting phase transition occurs when the solid goes to liquid and the freezing one when the liquid goes to solid, we can infer that melting is a process which requires energy to separate the molecules and freezing is a process that releases energy to gather the molecules.

Moreover, since the required energy to melt 1 g of ice is 334 J and the released energy when 1 g of water is frozen to ice is the same 334 J, if we want to melt 10 kg of ice, a higher amount of energy well be required in comparison to the released energy when 1 kg of water freezes, which is about 334000 J for the melting of those 10 kg of ice and only 334 J for the freezing of that 1 kg of water.

Best regards!

Answer:

Because of daylight savings

Answer:

because during the summer is when the earth is tilted a certain one. But because in different places they get summer at a different time the earth tilts differently for the places around the world.

Explanation:

Answer:

Deposition

Explanation:

Deposition is the phase transition in which gas transforms into solid without passing through the liquid phase. Deposition is a thermodynamic process. The reverse of deposition is sublimation and hence sometimes deposition is called desublimation.

Answer:

Frame of Reference

The fixed background surrounding an object, assumed to be at rest and in a fixed position.

Answer:

NaCl

Explanation:

because He which is helium gas its an element alone,

Cl which is chlorine is a single element,

B which is Boron and its a single element,

but NaCl which is simply called table sugar is the combination between Na, sodium and Cl, chlorine , so its called a compound not an element.

Answer: H2O

Explanation: The given balanced chemical reaction is,

This reaction is a reversible reaction.

The rate of forward reaction will be,

The rate of backward reaction will be,

And at equilibrium the rate of reaction is equal to the rate of backward reaction divided by the rate of forward reaction.

Answer:

0.972mol

Explanation:

Given parameters:

Volume of Solution of KCl = 0.486L

Molarity = 2.0M

Unknown:

Number of moles of KCl in solution = ?

Solution:

To find the number of moles of KCl in this solution, use the expression below;

  Number of moles  = molarity x volume

Insert the parameters and solve;

  Number of moles  = 0.486 x 2  = 0.972mol

Answer:

3.077 × 10¹⁴ Hz

Explanation:

f = ?

wavelength = 9.75 × 10-⁷m

using the formula,

c = wavelength × frequency

f = c/wavelength

but c(speed of light) = 3×10⁸m/s

f = 3 × 10⁸/9.75 × 10-⁷

f = 3.077 × 10¹⁴ s-¹

Answer:

Im a 100% sure it is B. average molecular speed of ethane is greater than the average molecular speed of propanol.

Explanation:

Sry I didnt' get the explaination from my teacher.

According to the Kinetic theory of gases, the average speed of all gases at the same temperature will be in the same range. Hence, option C is correct.

Kinetic theory of gases states the properties and composition of gases at a temperature and pressure. According to this theory, gaseous substances are made of tiny particles which are free to move and collide to each other.

The kinetic energy of the particles is directly proportional to the temperature. Hence, as the temperature increases, the kinetic energy increases and their average molecular speed increases.

At the same temperature, all the gases have equal range of average molecular speed irrespective of their molecular weight. Hence, at 400 K the average molecular speed of ethane and propanol will be the same.

Find more on kinetic theory :

https://brainly.com/question/15357425

#SPJ3

Answer:

x and y

Explanation:

Answer:

wx

Explanation:

Because the w is going toward the x

Answer:

hydrochloride acid

Explanation:

hope this helps :D

Answer:

If you know your gas laws, you have to utilise a certain gas law called Charles' Law:

V

1

T

1

=

V

2

T

2

V

1

is the initial volume,

T

1

is initial temperature,

V

2

is final volume,

T

2

is final temperature.

Remember to convert Celsius values to Kelvin whenever you are dealing with gas problems. This can be done by adding 273 to whatever value in Celsius you have.

Normally in these types of problems (gas law problems), you are given all the variables but one to solve. In this case, the full setup would look like this:

2.75

291

=

V

2

318

By cross multiplying, we have...

291

V

2

= 874.5

Dividing both sides by 291 to isolate

V

2

, we get...

V

2

= 3.005...

In my school, we learnt that we use the Kelvin value in temperature to count significant figures, so in this case, the answer should have 3 sigfigs.

Therefore,

V

2

= 3.01 L

Explanation:

please mark me as the brainliest answer and please follow me

Answer:

6L im not completly sure but i wouldnt risk it

Explanation:

Answer: the correct answer is D

Explanation: I just got the quiz finished

The products of the reaction has been potassium sulfate ([tex]\rm K_2SO_4[/tex]), and water ([tex]\rm H_2O[/tex]). Thus, option D is correct.

The chemical equation has been the representation of the reactants and the products formed. The reaction of KOH and sulfuric acid has been the neutralization reaction.

The products formed by the neutralization reaction has been salt and water.

The reaction of KOH and sulfuric acid has been:

[tex]\rm 2\;KOH\;+\;H_2SO_4\;\rightarrow\;K_2SO_4\;+\;2\;H_2O[/tex]

The products of the reaction has been potassium sulfate ([tex]\rm K_2SO_4[/tex]), and water ([tex]\rm H_2O[/tex]). Thus, option D is correct.

For more information about the chemical equation, refer to the link:

https://brainly.com/question/20492533

/~\ The correct answer is:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hydrogen is a chemical and is found in the sun and most of the stars, and the planet Jupiter is composed mostly of hydrogen. On Earth, hydrogen is found in the greatest quantities as water.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I hope this helps! /~\

Answer:

It occurs when a gas passes through a tiny hole.

Explanation:

Effusion is a term used to describe when a gaseous molecule in a container passes or escapes through a tiny/small hole. Effusion and diffusion are two properties of gases that are often used interchangeably, however, they differ.

Effusion differs from diffusion in the sense that the gas passes through a TINY HOLE that is smaller than the normal path. This is contrary to when gas disperses throughout a container as in diffusion.

The correct answer is:

A) It occurs when a gas passes through a tiny hole.

The acceleration on an object is proportional to the resultant force and inversely proportional to the mass of the object  

Newton's 2nd law explains that the acceleration produced by the resultant force on an object is proportional and in line with the resultant force and inversely proportional to the mass of the object  

∑F = m. a  

[tex]\large {\boxed {\bold {a = \frac {\sum F} {m}}}[/tex]

F = force, N  

m = mass = kg  

a = acceleration due to gravity, m / s²  

Newton's equation shows that the greater the net force applied to an object, the greater the acceleration, conversely the greater the mass of the object, the smaller the object's acceleration.

You can use this principle to choose the available answer options, because the questions are not complete

Answer:

Oxygen

Explanation:

i REALLY think it is

Answer:

electrostatic attraction

Explanation:

Electrostatic attraction refers to the electrostatic force of long-range interaction occurring between the attractive electrostatic adsorption in aqueous solution with differently charged particles or uncharged particles.

Answer: Electrostatic attraction.

Explanation:

Answer:

c elevation

Explanation:

C is the answer for your question

Answer:

B. water displacement is used "graduated cylinder is filled with water (100 mL) and the object is then put inside. ... If the new water level is (120 mL) we now know that the object has a volume of 20 mL."

Explanation:

Answer:

I think it would be b.water displacement

Answer: A. The s orbital is lower in energy than the p orbital

Explanation: Just did test

The S-Orbital fill before the p-orbital Because, The s-orbital is lower in energy than the p-orbital. Hence, Option (A) is correct.

The aufbau principle, from the German Aufbauprinzip, also called the aufbau rule, states that in the ground state of an atom or ion, electrons fill subshells of the lowest available energy, then they fill subshells of higher energy.

For example, the S subshell is filled before the P subshell is occupied.

Therefore, The S-Orbital fill before the p-orbital Because, The s-orbital is lower in energy than the p-orbital. Hence, Option (A) is correct.

Learn more about Energy here ;

https://brainly.com/question/1932868

#SPJ2

Answer:

the answer in simplest form is A) N2H

Answer:

A particular atom will have the same number of protons and electrons and most atoms have at least as many neutrons as protons. An element is a substance that is made entirely from one type of atom. For example, the element hydrogen is made from atoms containing just one proton and one electron.