Science Grade 5. 5 Importance of sound
​

Answer:

M2= 0,1 M

Explanation:

M1=0,15 M

V1= 100 mL =0,1 L

M2= ?

V2= 150 mL = 0,15 L

M1V1= M2V2

(0,15 mol/L) (0,1 L) = M2 (0,15 L)

0,015 mol / 0,15 L = M2

M2= 0,1 M

Answer:

Explanation:

1;1 since you do not need coefficients to balance the equation

The velocity of the water with an earlier velocity of 8 m/s will be 24 m/s in the small tube with an area of 4 cm², option C.

This is a problem involving the conservation of mass and the principle of continuity in fluid mechanics. According to the principle of continuity, the mass of a fluid flowing through any given section of a pipe must remain constant.

Using the given equation A₁v₁ = A₂v₂

A₁v₁ = A₂v₂

(12 cm²) (8 m/s) = (4 cm²) (v₂)

v₂ = (12 cm²) (8 m/s) / (4 cm²)

v₂ = 24 m/s.

Learn more on velocity here: https://brainly.com/question/25905661

#SPJ1

Moles of magnesium = 0.198 g / 24.31 g/mol = 0.00815 mol

What are the moles?

Based on the given data, we can calculate the moles of magnesium using the following formula:

moles of magnesium = mass of magnesium (g) / molar mass of magnesium

The molar mass of magnesium is 24.31 g/mol.

Thus, moles of magnesium = 0.198 g / 24.31 g/mol = 0.00815 mol

It seems that the experiment involves determining the mass and moles of magnesium. The temperature of water, vapor pressure of water, and barometric pressure are likely additional data points collected during the experiment for further analysis.

To know more about the moles, visit:

https://brainly.com/question/26416088

#SPJ1

The calculations can be done by using formula given below. With the consideration of room temperature 71.8 F.

1. In order to determine the order of reaction with respect to the Crystal Violet dye (X in the example), we must take the derivative of the rate law equation with respect to X, which gives us the expression:

[tex]-d[X]/dt = k[X]^x[Y]^y.[/tex]

This equation tells us that the order of reaction with respect to X is x.

2. To determine the order of reaction with respect to the NaOH (Y in the example), we must take the derivative of the rate law equation with respect to Y, which gives us the expression:

[tex]-d[Y]/dt = k[X]^x[Y]^y.[/tex]

This equation tells us that the order of reaction with respect to Y is y.

3. To determine k, we must take the rate law equation, plug in the appropriate values, and solve for k. The equation we are solving is:

[tex]-d[X]/dt = k[X]^x[Y]^y.[/tex]

4. The overall, modified rate law with the appropriate values for X, Y, and k inserted into the equation is:

[tex]-d[X]/dt = k[X]^x[Y]^y.[/tex]

5. Solving the rate law, we get:

[tex]k = (-d[X]/dt) / (71.8^x[0.02803]^y).[/tex]

6. To find the concentration of crystal violet dye solution in each concentration of NaOH, we must use the equation:

[tex][X] = [X]0 + kt,[/tex]

where [X]0 is the initial concentration of crystal violet dye solution, k is the rate constant, and t is the time elapsed. Plugging in the appropriate values for each trial will give us the desired concentration of crystal violet dye solution for each concentration of NaOH.

For more such questions on room temperature , Visit:

https://brainly.com/question/17410084

#SPJ11

Cycloalkanes of eight or fewer more atoms have a cis double bond geometry. Since a trans geometry will introduce too much strain.

The cycloalkanes are defined as the monocyclic saturated hydrocarbons. It consists only of hydrogen and carbon atoms arranged in a structure containing a single ring and all of the carbon-carbon bonds are single. Cis and trans isomers are defined as the types of geometric isomers where the functional group is placed differently with regards to the double bond. A cis isomer has molecules on one side of the double bond that is why it cause too much strain in the ring. If the two substituents are on the same side of the double bond then the configuration of the bond is called cis double bond geometry. A trans isomer has molecules on the other side of the double bond as it forms cis double bond geometry.

To learn more about cis double bond geometry

https://brainly.com/question/30857701

#SPJ4

The complete question is,

cycloalkanes of eight or fewer atoms have a ---------- geometry.

Sulfur (S) belongs to the chalcogens, which is a group of elements located in Group 16 on the periodic table. So the correct option is D.

Chalcogens are characterized by their tendency to form compounds in which they have a -2 oxidation state. The chalcogens consist of oxygen (O), sulfur (S), selenium (Se), tellurium (Te) and polonium (Po).
The name “chalcogens” comes from the Greek words “chalkos” and “genes” which mean “ore forming.” This name was given because all the chalcogens form ores that are mined and used for industrial purposes.
Sulfur is a yellow, non-metallic element that is the third most abundant element in the Earth’s crust. It has been known since ancient times and is found in various minerals and volcanic gases. Sulfur has many uses, from being an essential element in proteins to being a key ingredient in explosives.
In conclusion, sulfur (S) belongs to the chalcogens, a group of elements located in Group 16 on the periodic table. This group is characterized by their tendency to form compounds in which they have a -2 oxidation state. Sulfur is a yellow, non-metallic element that is essential in proteins and is also a key ingredient in explosives. So the correct option is D.

For more such questions on chalcogens

https://brainly.com/question/29220016

#SPJ11

The R f values for compounds A, B, and C on a silica gel TLC plate developed in hexanes would be determined by measuring the distance each compound traveled compared to the distance the solvent traveled.

a) There is a 4 cm gap between the origin and the solvent front. The Rf value for spot A is[tex]\frac{1.5}{4}= 0.375[/tex], because it travelled 1.5 cm. Due to the 3.5 cm movement of Spot B, its Rf is[tex]\frac{3.5}{4} = 0.875[/tex]. Spot C shifted 3 cm, making its Rf [tex]\frac{3}{4} = 0.75[/tex].

b)Due to its shorter travel distance than the other two compounds, compound A is the most polar. Recall that polar substances adhere to the adsorbent more readily, move less, and have a lower Rf value.

c)Hexanes is less polar than acetone as a solvent. Each of the three compounds would move more quickly if the same method were employed to elute them.The chemicals can be removed from the polar adsorbent more effectively with a more polar eluting solvent. Each compound would have a higher Rf value if acetone were used to elute the TLC plate as opposed to hexanes because each compound travels more quickly.

learn more about  Rf value Refer:brainly.com/question/17796724

#SPJ1

The wavelength of the sound in the solid medium, given that the speed of the sound in the solid is 15 times greater than that in air is 0.06 m

The wavelength of a wave is defined by the following formular:

Velocity (v) = wavelength (λ) × frequency (f)

v = λf

The following data were obtained from the question:

Velocity (v) = wavelength (λ) × frequency (f)

5160 = wavelength × 87000

Divide both sides by 87000

Wavelength = 5160 / 87000

Wavelength = 0.06 m

Therefore, we can conclude that the wavelength is 0.06 m

Learn more about wavelength:

https://brainly.com/question/30859618

#SPJ1

In comparison to 310.0 K, the reaction happens 1.28 times faster at 314 K.

A high K value (higher than 1) denotes an equilibrium with more products than reactants, whereas a low K value (less than 1) denotes an equilibrium with more reactants than products.

The Arrhenius equation, which connects the rate constant (k) to the activation energy (Ea) and temperature (T), can be used to determine how much faster the reaction happens at 314 K than it does at 310.0 K. k = A * exp(-Ea / (R * T))

where T is the temperature in Kelvin, R is the gas constant, and A is the preexponential factor.

For this reaction, we can assume that the pre-exponential component is fixed and that the sole variable is temperature.

exp[(Ea / R) * (1/T1 - 1/T2)] = k2 / k1

where Ea is the activation energy, R is the gas constant, k1 is the rate constant at 310.0 K, and k2 is the rate constant at 314 K.

k2 / k1 = exp[(50.0 kJ/mol / (8.314 J/mol•K)) * (1/310.0 K - 1/314 K)] is the result of substituting the provided numbers.

If we condense this phrase, we get:

k2 / k1 = 1.28

To know more about reaction visit:-

https://brainly.com/question/28270550

#SPJ1

Answer:

Explanation:

A photochemical reaction is a chemical reaction that occurs due to the absorption of light energy. These reactions typically require high-energy radiation, such as ultraviolet or visible light, to initiate the reaction.

The three stages involved in the photochemical reaction between methane and chlorine to form chloromethane are:

i) Initiation: Chlorine molecules absorb high-energy UV radiation, which causes the chlorine bond to break homolytically, producing two chlorine radicals. This process requires energy and is endothermic.

Cl2 + energy (UV) → 2Cl•

ii) Propagation: The chlorine radical attacks a methane molecule, breaking the C-H bond and producing a methyl radical and HCl. The methyl radical then reacts with another chlorine molecule, producing another chlorine radical and chloromethane. The chlorine radical then continues to react with more methane molecules, propagating the reaction.

Cl• + CH4 → •CH3 + HCl

•CH3 + Cl2 → CH3Cl + Cl•

iii) Termination: In the termination stage, radicals combine to form products, which stops the propagation of the reaction. For example, two methyl radicals can combine to form ethane, or a chlorine radical and a methyl radical can combine to form methyl chloride.

•CH3 + •CH3 → C2H6

•CH3 + Cl• → CH3Cl

The overall reaction for the formation of chloromethane from methane and chlorine in the presence of UV light is:

CH4 + Cl2 + UV light → CH3Cl + HCl

Answer:

50.00 cm³

Explanation:

Relevant formula:

n = V × c

n = number of moles (mol)

V = volume (dm³)

c = concentration (mol/dm³)

1. Work out moles of KOH

V = 50cm³ = 0.05dm³

Note: remember to convert to the right units (1 dm³ = 1000cm³)

c = 0.2

n = 0.05 × 0.2

n = 0.01

2. Use balanced reaction equation to find the moles of H2SO4

c = 0.1

H2SO4 + 2KOH --> K2SO4 + 2H2O

Ratio of KOH to H2SO4:

2 : 1 (--> 1 is ½ of 2)

If we have 0.01 moles of KOH therefore:

0.01 : x

x = 0.005 (i.e. ½ of 0.01)

3. Calculate volume of H2SO4

n = V × c

0.005 = V × 0.1

V = 0.005 ÷ 0.1

V = 0.05

This reaction will take 0.05 dm³ of H2SO4, or 50 cm³

The electron transport chain harnesses the potential energy of the molecules NADH and FADH2, which donate electrons to proteins in the electron transport chain.

NADH and FADH2 are coenzymes that help transfer electrons from metabolic reactions such as glycolysis, the citric acid cycle, and fatty acid oxidation. The electrons from NADH and FADH2 are passed from one electron carrier to another until they reach the terminal electron acceptor, which is usually oxygen. As the electrons are passed along the electron transport chain, energy is released and used to produce a form of energy that cells can use, called ATP. The energy produced by the electron transport chain is used by cells to do work, such as muscle contraction, active transport, and protein synthesis. The electron transport chain is a vital process that occurs in all cells, and it is responsible for the production of ATP, which is necessary for cells to function properly.

For more such questions on electron transport chain

https://brainly.com/question/876880

#SPJ11

If we had 79.3 grams of Xe, we would expect a volume that is greater than that obtained with neon.

The volume of a gas depends on the number of moles of gas, temperature, and pressure. The gas's molar mass is not a factor in determining the volume of the gas. The ideal gas law, PV = nRT, can be used to find the volume of a gas.

PV = nRT can be rearranged as V = (nRT)/P, where V is the volume of the gas, n is the number of moles of the gas, R is the gas constant, T is the temperature, and P is the pressure of the gas. We can see that the volume of the gas is directly proportional to the number of moles of the gas. Therefore, a greater number of moles of gas would correspond to a larger volume.

If we had 79.3 grams of Xe, we can use the molar mass of Xe to find the number of moles of Xe. The molar mass of Xe is 131.29 g/mol.

Therefore, the number of moles of Xe would be:79.3 g Xe / 131.29 g/mol = 0.604 moles of Xe

On the other hand, if we had neon, which has a molar mass of 20.18 g/mol, the number of moles of neon would be 79.3g Ne / 20.18 g/mol = 3.93 moles of Ne

Therefore, we can see that the number of moles of neon is greater than the number of moles of Xe. Therefore, we would expect a greater volume of neon compared to Xe.

Know more about Neon here :

https://brainly.com/question/31187112

#SPJ11

Answer:

1.03 mol of dihydrogen gas will evolve, with a volume slightly over 22.4 dm3 at ST P. Explanation: Moles of magnesium: 50.0 ⋅ g 24.31 ⋅ g ⋅ mol−1 = 2.06 mol Moles of hydrogen chloride gas: 75.0 ⋅ g 36.2⋅ g ⋅ mol−1 = 2.07 mol

Explanation:

HOPE THAT HELPS ! <3

Answer:

65.72 kJ/mol

Explanation:

The temperature change, ΔT, can be used to calculate the amount of heat absorbed by the solution:

q = CmΔT

where q is the heat absorbed, C is the specific heat capacity of water (4.18 J/goC), m is the mass of the solution, and ΔT is the temperature change.

The mass of the solution can be calculated using its density:

m = Vd

where V is the volume of the solution (332 mL = 0.332 L), and d is the density of water (1.00 g/cm3).

m = 0.332 L x 1.00 g/cm3 = 332 g

The amount of heat absorbed, q, can now be calculated:

q = CmΔT = (4.18 J/goC) x (332 g) x (3.25 oC) = 4447 J

This amount of heat is absorbed by the dissolution of 7.51 g of CaCl2. To calculate the enthalpy change per mole of CaCl2, we need to convert grams to moles:

moles of CaCl2 = 7.51 g / 110.98 g/mol = 0.0676 mol

Therefore, the enthalpy change per mole of CaCl2 is:

ΔH/mol = q / moles of CaCl2 = 4447 J / 0.0676 mol = 65720 J/mol = 65.72 kJ/mol

So the enthalpy change per mole of CaCl2 is 65.72 kJ/mol.

When NH4Cl is dissolved in water, the following ions are produced are H+, Cl-, NH3, and NH4+.

When NH4Cl is dissolved in water, the ions that are produced are  H+, Cl-, NH3, and NH4+. An ion is an electrically charged atom or molecule. When a neutral atom or molecule gains or loses electrons, it acquires an electric charge and becomes an ion.

Conventionally, the charge of an electron is thought to be negative; this charge is equal to and opposite to the charge of a proton, which is thought to be positive. Because the total number of electrons in an ion is more than the total number of protons, the net charge of an ion is not zero.

A negatively charged ion called an anion has more electrons than protons compared to a positively charged ion called a cation. Electrostatic force causes opposite electric charges to be drawn towards one another, causing cations and anions to attract one another and easily form ionic compounds.

The ammonium ion, NH4+, is generated when ammonia (NH3) is combined with a hydrogen ion (H+), which results in the formation of NH4+ ions. When NH4Cl dissolves in water, the NH4Cl dissociates into its component ions, NH4+ and Cl-.

As a result, the answer is H+, Cl-, NH3, and NH4+.

For more such questions on NH4Cl , Visit:

https://brainly.com/question/30459946

#SPJ11

The answer for all natural hazards statements are 1. True, 2. Ture, 3. True, 4. True, 5. True, 6. True, 7. False.

Natural hazards are natural phenomena that can potentially cause harm or damage to humans, property, or the environment. These hazards are events that are caused by natural processes, such as geological, meteorological, hydrological, or biological processes. Natural hazards can range from relatively minor events, such as a small earthquake or a local flood, to catastrophic events, such as a volcanic eruption, a major earthquake, or a tsunami.

This statement is true. Natural hazards, such as earthquakes, hurricanes, floods, and wildfires, can cause a wide range of negative impacts on people and communities, including disruptions to daily life, damage to property, economic loss, and injury to people.

This statement is true. Natural hazards vary in their severity because they can occur in a range of magnitudes, from mild to extreme. The severity of a natural hazard event depends on various factors, such as the strength and duration of the event, the location and vulnerability of the affected population, and the preparedness and response capacity of the community.

This statement is true. Many natural hazards, such as earthquakes, hurricanes, and tornadoes, cause damage to property by exerting unbalanced forces on objects. These forces can cause objects to accelerate suddenly and then decelerate suddenly when they collide into objects that are at rest or that are moving in a different direction.

This statement is true. Studying the most intense and impactful natural hazard events of the past can help scientists and communities better understand the possible intensity and damages of future hazards. This information can be used to improve preparedness, response, and recovery efforts.

This statement is true. Examining the historical record of natural hazard events can help scientists and communities predict how likely it is that a similar event will occur in the future. This information can be used to assess risk and inform decision-making.

This statement is true. Patterns in the locations, frequency, and intensity of past natural hazard events can help scientists and communities forecast future events. For example, if a certain area has experienced frequent earthquakes in the past, it is more likely to experience earthquakes in the future.

This statement is false. While records of past events can provide valuable information for predicting future hazards, scientists do not assume that the conditions that created those hazards in the past will remain the same in the future. They consider a wide range of factors, such as changes in climate, land use, and population density, that may affect the occurrence and impact of natural hazards.

To know more about hazard  visit:

https://brainly.com/question/28269548

#SPJ1

Based on the types of intermolecular forces that are likely to be present, we can rank the given compounds from weakest to strongest intermolecular forces as follows: I₂, H₂S and H₂O.

The strength of intermolecular forces is determined by the type and extent of interactions between molecules. In general, the three major types of intermolecular forces are dispersion forces (also called London forces), dipole-dipole forces, and hydrogen bonding.

I₂: This is a nonpolar molecule, and the only intermolecular force present is dispersion forces, which arise from temporary fluctuations in electron density that create instantaneous dipoles. Dispersion forces are the weakest intermolecular forces, so I₂ has the weakest intermolecular forces among the given compounds.

H₂S: This is a polar molecule, and it exhibits dipole-dipole forces in addition to dispersion forces. Dipole-dipole forces arise from the attraction between the positive end of one molecule and the negative end of another. Although dipole-dipole forces are stronger than dispersion forces, they are still weaker than the next type of intermolecular force.

H₂O: This is a polar molecule that exhibits both dipole-dipole forces and hydrogen bonding. Hydrogen bonding is a special type of dipole-dipole force that arises when hydrogen atoms in molecules are bonded to highly electronegative atoms (such as oxygen or nitrogen). The hydrogen bond is a particularly strong intermolecular force, and as a result, H₂O has the strongest intermolecular forces among the given compounds.

Learn  more about intermolecular forces here: https://brainly.com/question/2193457

#SPJ1

The carbonyl group can be either a ketone or an aldehyde.

To draw the structure of an alkene with one double bond that would give the compound after ozonolysis followed by H2O2, you will need to draw a chain of two carbon atoms with one double bond connecting them.

The Lewis structure would look like this:This structure represents an alkene, as it contains one double bond between two carbon atoms. Ozonolysis followed by H2O2 would break the double bond and then reduce the two resulting aldehyde groups, forming the compound.An alkene is a hydrocarbon containing a carbon-carbon double bond (C=C). Hydrocarbons containing carbon-carbon triple bonds (C≡C) are known as alkynes.Ozonolysis is a chemical reaction in which ozone (O3) reacts with an unsaturated substance, breaking down the double or triple bonds and producing two oxygen atoms (O) per double bond in the process.

Alkenes and alkynes are usually oxidized in ozonolysis followed by hydrogen peroxide (H2O2).When ozonolysis is followed by H2O2, the products obtained are carbonyl compounds that differ from each other depending on the reaction conditions. The products of ozonolysis followed by H2O2 depend on the structure of the alkene. The only product of ozonolysis followed by H2O2 for an alkene is a mixture of aldehydes and ketones with one fewer carbon than the original alkene.The following are the steps to be followed for the given question:Step 1: Draw the structure of an alkene with one double bond. A double bond means that there is a C=C between two carbon atoms, as shown in the figure below.Step 2:

The structure of the alkene is shown below

Step 3: When the given compound undergoes ozonolysis followed by H2O2, it results in two carbonyl compounds with one fewer carbon than the original alkene. The compound in the question has three carbon atoms, so the two carbonyl compounds obtained from ozonolysis followed by H2O2 will have two carbon atoms.Step 4: The products obtained after ozonolysis followed by H2O2 are shown below:In this figure, R1 and R2 represent substituents on the carbonyl group. The products of ozonolysis followed by H2O2 depend on the structure of the alkene. So, the only product that can be obtained for the given alkene is shown below.

For more such questions on aldehyde

https://brainly.com/question/28259216?source=archive

#SPJ11

Answer:

175 grams

Explanation:

25+150=175

175 grams

Carbon capture and storage is one experimental method being utilised to lower carbon dioxide emissions from coal (CCS).

One experimental technique being used to reduce carbon dioxide emissions from coal is carbon capture and storage (CCS). With CCS, carbon dioxide emissions from factories or power plants are captured and either stored underground in geological formations or used to improve oil recovery.

Coal and other fossil fuels have the potential to drastically cut their carbon dioxide emissions, but CCS technology currently in the experimental stage. Unfortunately, because of its expensive cost and technical implementation difficulties, the technology is not yet extensively employed.  In order to address the current climate problem, efforts to cut CO2 emissions are essential.

Learn more about carbon dioxide here:

https://brainly.com/question/9419166

#SPJ4

What experimental technology is being used to reduce carbon dioxide emissions from coal?

Answer: 350.849 g

Explanation:

The question is asking the masses of water, sugar, and the beaker to be added together. So, it can be understood that we need to add all of the masses up as follows to get the combined mass:

263.2 g + 87.10 g + 0.549 g = 350.849 g

From this, we can determine that the combined mass of the beaker, water, and sugar (in grams) is 350.849 g.

The balanced equation for the given reaction is:

4 Si4C3 + 15 O2 → 8 Si2O3 + 3 C

What is Balanced Chemical Equation?

The coefficients in a balanced chemical equation represent the stoichiometric relationship between the reactants and products. They show the relative amounts of each substance that are involved in the reaction. In the given chemical equation, Si4C3 + O2 -> Si2O3 + C, the coefficients can be determined by balancing the number of atoms of each element on both sides of the equation.

Starting with Si, there are 4 Si atoms on the left and 2 Si atoms on the right, so a coefficient of 2 is needed in front of Si2O3 to balance the number of Si atoms.

Moving on to C, there are 3 C atoms on the left and 1 C atom on the right, so a coefficient of 3 is needed in front of C to balance the number of C atoms.

Finally, for O, there are 2x3=6 O atoms on the left and 2x2=4 O atoms on the right, so a coefficient of 3 is needed in front of O2 to balance the number of O atoms.

The balanced equation is thus: Si4C3 + 3O2 -> 2Si2O3 + 3C, with coefficients of 1, 3, 2, and 3 for Si4C3, O2, Si2O3, and C, respectively.

Learn more about Balanced Chemical Equation from given link

https://brainly.com/question/29367108

#SPJ1

Answer:

Using C2H4 + 3 O2 -> 2 CO2 + 2 H2O. If 20 moles of fuel are combusted in the above equation, how many moles of O2 are consumed?

Explanation:

According to the balanced chemical equation:

1 mole of C2H4 reacts with 3 moles of O2

Therefore, for 20 moles of C2H4 combusted, we would need:

20 moles C2H4 × (3 moles O2 / 1 mole C2H4) = 60 moles O2

So, 60 moles of O2 are consumed in the combustion of 20 moles of C2H4.

The equilibrium constant for the reaction at 25 °C is 4.749.

ΔG for the reaction at body temperature is -4.899 kJ/mol.

The standard free energy change (ΔG°) of the reaction is given as -3.860 kJ/mol.

At 25°C, the equilibrium constant (K'eq) can be calculated using the following equation:

ΔG° = -RTlnK'eq

where R is the gas constant (8.314 J/molK) and T is the temperature in Kelvin (25°C = 298 K).

Converting the given units of ΔG° to joules/mol:

ΔG° = -3.860 kJ/mol = -3.860 × 10³ J/mol

Substituting the values in the equation:

-3.860 × 10³ J/mol = -(8.314 J/molK) × 298 K × lnK'eq

Solving for K'eq:

lnK'eq = 14.678

K'eq = e^(14.678) = 4.749 (rounded to three significant figures)

At 37.0°C, the ΔG for the reaction can be calculated using the following equation:

ΔG = ΔG° + RTln(Q)

where R is the gas constant (8.314 J/molK), T is the temperature in Kelvin (37.0°C = 310 K), and Q is the reaction quotient.

Q = [B]/[A] = 0.45/1.7 = 0.265

Substituting the values in the equation:

ΔG = -3.860 × 10³ J/mol + (8.314 J/molK) × 310 K × ln(0.265)

ΔG = -4.899 kJ/mol (rounded to three significant figures)

Learn more on general reactions here: https://brainly.com/question/12049042

#SPJ1

The question is:

Consider a general reaction

    enzyme

A(aq) ⇔ B(aq)

The AG of the reaction is -3.860 kJ mol-1. Calculate the equilibrium constant for the reaction at 25 °C.

K'eq =_________

What is ΔG for the reaction at body temperature (37.0 °C) if the concentration of A is 1.7 M and the concentration of B is

0.45 M?

ΔG= ______ kJ mol-1

Answer: Polar

Explanation: This is because if you look up the Lewis Dot structure of this specific molecule, it will have some net dipole moment, which makes it polar.

It can be considered that when a molecule does have some net dipole moment, it is polar.

So, yes CF3Cl is polar.

CF₃Cl, also known as chlorotrifluoromethane, is a polar molecule.

To determine the polarity of a molecule, consider the individual bond polarities and the molecular geometry.

In CF₃Cl, there is a difference in electronegativity between carbon (C) and chlorine (Cl), as well as between carbon and fluorine (F). Chlorine and fluorine are more electronegative than carbon, meaning they have a greater ability to attract electrons toward themselves.

The C-Cl bond and the C-F bonds in CF₃Cl are polar bonds due to the electronegativity difference. The Cl and F atoms pull the shared electrons towards themselves, creating partial negative charges on those atoms and partial positive charges on the carbon atom.

To learn more about the polar molecule, follow the link:

https://brainly.com/question/1946554

#SPJ6

A tube is the term used to describe the straw-like organ utilized by both plants and animals to consume food and water or to eliminate waste.

A hollow, cylindrical structure that is often present in living things is referred to as a tube. Many biological structures, such as blood veins, intestines, respiratory tracts, and the reproductive system, contain tubes. Many biological functions, including the passage of nutrients, the exchange of gases, and the removal of waste materials, depend on tubes.

These tubes are referred to as xylem and phloem in plants. While the phloem moves sugars and other nutrients from the leaves to other parts of the plant, the xylem is in charge of moving water and minerals from the roots to the rest of the plant.

Animals have many species-specific tube-like organs in charge of intake and waste elimination. Mammals, for instance, have a sophisticated digestive system that consists of the anus, esophagus, stomach, and intestines. Together, these organs help the body digest food, extract nutrients, and get rid of waste.

Generally, tubes or channels are essential for both plant and animal life because they let them take in the substances they need and let waste out.

To know more about tube, visit:

https://brainly.com/question/30271755

#SPJ1

Answer:

The balanced combustion reaction for toluene (C7H8) is:

C7H8 + 9O2 → 7CO2 + 4H2O + heat

Therefore, the correct option is A.

The correct balanced combustion reaction for toluene (C7H8) is 'C7H8 + 9O2 → 7CO2 + 4H2O + heat' which represents a combustion reaction where a substance reacts with oxygen to generate heat and form carbon dioxide and water.

The balanced combustion reaction for toluene (C7H8) is represented by the equation:

C7H8 + 9O2 → 7CO2 + 4H2O + heat

This is a combustion reaction, which typically involves a substance reacting with oxygen to generate heat and form carbon dioxide (CO2) and water (H2O). Here, toluene reacts with oxygen (O2), producing heat, carbon dioxide, and water. Therefore, the correct answer is A. C7H8 + 9O2→ 7CO2 + 4H2O + heat.

https://brainly.com/question/34266042

#SPJ2