(science) explain the difffrence between a food chain and a food web

a.) The stressor that causes high concentrations of abscisic acid to travel from the roots to the shoot is drought.

An essential element of a plant's reaction to abiotic stress, particularly drought, is played by the hormone abscisic acid (ABA). Drought causes plants to create large amounts of ABA, which is then transferred from the roots to the shoot. Many physiological reactions result from this, including the closing of stomata, which lowers water loss through transpiration, and the activation of genes that encourage the manufacture of proteins that shield cells from dehydration-related cell damage. In addition, ABA causes inhibition of root development, which enables roots to sever deeper layers of soil in quest of water. In general, ABA production and transport play a key role in how plants manage drought stress and keep their water balance.

learn more about abscisic acid here:

https://brainly.com/question/13800529

#SPJ4

The cortex and pith layers of the stem are made up of parenchyma cells. These cells are responsible for storing and transporting nutrients and water throughout the plant.

Two significant plant stem layers are the cortex and pith. The pith is found at the stem's centre, while the cortex is situated in between the epidermis and the vascular tissue. Parenchyma cells, which are the most prevalent and adaptable form of plant cell, make up both of these layers. Large vacuoles and thin cell walls are characteristics of parenchyma cells, which may perform a variety of tasks include photosynthesis, water and nutrient transport, and storage. The flow of water and nutrients between the roots and leaves in stems is especially dependent on the parenchyma cells in the cortex and pith.

learn more about cortex  here:

https://brainly.com/question/29342434

#SPJ4

For the given radioactive decays: ₄₀K¹⁹: Beta emission ₂₁₈Po⁸⁴: Alpha emission ₂₂₆Ra⁸⁸: Electron capture. Alpha particles are helium nuclei (2 protons and 2 neutrons) emitted from some unstable nuclei of elements.

Gamma rays are a type of electromagnetic radiation, much like x-rays, visible light and radio waves. Gamma rays possess the highest frequency and the most energy of all types of electromagnetic radiation, and are created in the most extreme environments in the Universe. They are emitted from the nuclei of atoms  some natural events such as supernovae, and can range from very low energies to the highest energies of all electromagnetic radiation. Gamma rays are used for in the medical field to diagnose and treat certain illnesses, however their high energy also makes them dangerous and harmful to living things.

Radioactive decay occurs when unstable atoms lose energy by emitting particles and/or radiation. Put simply, atoms become unstable and break apart to become more stable, and the process of releasing this energy is known as radioactive decay. Radioactive decay can be seen when certain elements spontaneously transform into other elements by emitting alpha particles, beta particles, or gamma radiation. Over time, these particles and/or radiation emitted cause the original atoms to become completely different elements.

To know more about alpha emission, visit:

https://brainly.com/question/28564218

#SPJ1

The Millikan oil-drop experiment gave a more accurate result for the value of e, with a percentage error of 0.002%. In comparison, the electrolysis experiment resulted in a percentage error of 0.06%.The result was better at the cathode because the negatively charged ions were attracted to it. Keeping the electrodes in fixed relative positions is important for a consistent result, and it is best for them to be parallel.

1. Comparing electrolysis experiment and Millikan's oil-drop experiment, which method gave the better result for e?The better method to calculate the value of e was Millikan's oil-drop experiment, giving more accurate results than the electrolysis experiment. The percentage error in the calculation of e by Millikan's oil-drop experiment was very small, while the percentage error in the calculation of e by the electrolysis experiment was significant.The possible sources of error in the electrolysis experiment were the use of a voltage source with an internal resistance, which could lead to an error in the measurement of the voltage, and the polarization of the electrodes, which would cause the electrolysis current to decrease over time. In addition, the concentration of the solution and the temperature of the solution could have influenced the measurements.  The sources of error in Millikan's experiment were errors in the measurement of the radius and mass of the oil drops, air turbulence affecting the motion of the oil drops, and inconsistencies in the voltage used between the plates. 2. Which electrode gave better results in the electrolysis experiment?The cathode provided a better result than the anode. Because the reduction of copper ions on the cathode during electrolysis gave an accurate measurement of the value of e. 3. Why should the electrodes be kept in fixed relative positions during the electrolysis?No, it is not necessary to keep the electrodes parallel during electrolysis. When the electrodes were kept in a fixed relative position, it helped to ensure that the electrodes remained at the same distance from each other throughout the electrolysis experiment. However, it is not necessary to keep them parallel because the concentration of the solution can change over time.The second electrolysis was more accurate than the first one. It is because we obtained the desired result, i.e., 3.3 x 10^{-19} C. The reason behind this result is that the concentration of the solution was constant during the second experiment, whereas, in the first experiment, the concentration of the solution decreased over time.

For more such questions on Millikan oil-drop

https://brainly.com/question/14780949

#SPJ11

0.0637 moles of NaOH were used in the reaction.

Moles (mol) are a unit of measurement used to quantify the amount of a substance. One mole represents the amount of a substance that contains as many entities (atoms, molecules, ions, etc.) as there are atoms in exactly 12 grams of carbon-12.

Moles provide a way to relate the mass of a substance to the number of its constituent particles. The concept of moles is essential for performing calculations involving stoichiometry, determining the ratio of reactants and products in chemical reactions, and understanding the relationship between mass, volume, and the number of particles in a substance.

moles = volume (in liters) x molarity

6.37 ml ÷ 1000 = 0.00637 L

moles = 0.00637 L x 10.0 M

= 0.0637 moles

Learn more about Moles, here:

https://brainly.com/question/15209553

#SPJ12

It is incorrect to say that adding more reactants to an equilibrium chemical system will result in only one of the reactants being consumed.

A reaction mixture's equilibrium composition is unaffected. This is due to the fact that in a reversible reaction, a catalyst enhances the speed of both forward and backward reactions to the same level.

Every reaction aims to achieve a state of chemical equilibrium, or the point when both the forward and backward processes are moving at the same rate.

To know more about equilibrium visit:-

https://brainly.com/question/29627805

#SPJ1

The pairs of conditions that need to construct a similar cell that generates the lowest cell potential is [Zn2+]=0.5M and [Fe2+]=1M because Q<1. The correct answer is option A,

In order to construct a similar cell that generates the lowest cell potential, we need to consider the Nernst equation.

Where,

Ecell=E°cell − (0.0592/n) log Q

Where,

E°cell = Standard electrode potential

n = Number of electrons exchanged

Q = Reaction Quotient = [products]/[reactants]

For the given reaction, the cell potential is +0.32 V. This implies that under standard conditions, Q = 1.The answer to the given question is that [Zn2+] = 0.5 M and [Fe2+] = 1 M because Q < 1.

The conditions under which the standard electrode potential of a half-cell is measured are referred to as standard conditions. This usually entails a concentration of 1.00 mol/L for all substances, an atmospheric pressure of 1.00 atm, and a temperature of 25°C.

Learn more about Nernst equation here: https://brainly.com/question/15394851

#SPJ11

The relative magnitudes (absolute values) of the lattice energy and heat of hydration for the compound is exothermic, resulting in an increase in the temperature of the solution.

When lithium iodide (LiI) is dissolved in water and the solution becomes hotter, this indicates that the dissolution process is exothermic, i.e., it releases heat to the surroundings.

The dissolution of an ionic compound in water involves two processes: breaking apart the lattice structure of the solid (lattice energy) and the hydration of the individual ions by water molecules (heat of hydration). The lattice energy is the energy required to separate the ions in the solid state, and the heat of hydration is the energy released when the separated ions are surrounded by water molecules.

In the case of lithium iodide, the fact that the solution becomes hotter indicates that the heat of hydration is greater than the lattice energy. This means that more energy is released when the ions are hydrated by water molecules than is required to break apart the lattice structure.

Therefore, the overall process is exothermic, resulting in an increase in the temperature of the solution.

learn more about lithium iodide: https://brainly.com/question/1596844

#SPJ1

The complete question goes thus

When lithium iodide (LiI) is dissolved in water, the solution becomes hotter.

Is the dissolution of lithium iodide endothermic or exothermic?

What can you conclude about the relative magnitudes of the lattice energy of lithium iodide and its heat of hydration?

In the catalytic triad, the purpose of the aspartic acid residue is to activate the serine residue by removing a hydrogen ion (H+) from the serine residue, causing it to become a highly reactive alkoxide ion.

The catalytic triad is a trio of amino acid residues that play a significant role in catalyzing reactions in a diverse range of enzymes. The residues found in the triad are typically present in the active site of an enzyme, where they work together to catalyze a reaction.Aside from the aspartic acid residue, the catalytic triad also contains two other amino acid residues: serine and histidine. These three residues work together to carry out the enzyme's function. In the case of the aspartic acid residue, its primary role is to activate the serine residue by removing a hydrogen ion (H+) from the serine residue, causing it to become a highly reactive alkoxide ion. This highly reactive ion then goes on to react with the enzyme's substrate, resulting in the desired reaction.Catalytic triads are found in a variety of enzymes, including chymotrypsin, trypsin, and elastase. Each of these enzymes has a slightly different catalytic triad that is uniquely suited to catalyzing the specific reaction the enzyme carries out.

For more such questions on aspartic acid , Visit:

https://brainly.com/question/15062960

#SPJ11

The double bond between the fourth and fifth chain vertices in the zingiberene compound is the most reactive in an electrophilic addition reaction with HBr.

This double bond can be identified by selecting each atom individually on the canvas and assigning them a map number of 1 until all atoms of the bond are mapped. To do this, right-click on an atom and choose atom properties (Mac users: use an equivalent for right-clicking). Then, clear the check mark to enable the map field before entering a value.

To learn more about "double bonds", visit: https://brainly.com/question/1004467

#SPJ11

Calculating the molarity of acetic acid in vinegar:

Molarity (M) = (number of moles of solute) / (volume of solution in liters)

The molar mass is the same as mass number if it is only one element with no subscripts.

the mass of acetic acid in the vinegar will be determined first:

Mass = volume (L) × density (g/mL)

Mass = 1 L × 1.05 g/mL

Mass = 1.05 g/L

Then, the moles of acetic acid can be calculated using the molar mass of acetic acid:

Moles = mass (g) / molar mass

Moles = 1.05 g / 60.05 g/mol

Moles = 0.01748 mol

Acetic acid molarity = 0.01748 mol / 1 L

                                = 0.01748 M

Calculating the percentage of acetic acid in vinegar:

% acetic acid = (mass of acetic acid/volume of vinegar) × 100%

                     = (1.05 g / 100 mL) × 100%

                     = 1.05%

Therefore, the result of the calculation will be close to 1.05%, not 5%.

To know more about molarity:

https://brainly.com/question/19517011

#SPJ11

The anaerobic breakdown of glucose in these organisms results in the formation of lactic acid and ethanol, respectively.

Hence, option c. (Pyruvate, NADH, and ATP) is the correct answer.

Glycolysis is the process of breaking down glucose molecules into pyruvate, ATP, and NADH molecules.

Pyruvate and ATP are the end-products of glycolysis except for CO2.

Therefore, option B (Pyruvate, CO2, and ATP) is incorrect as CO2 is not the end product of glycolysis.

Thus, the correct option is c.  (Pyruvate, NADH, and ATP) where Acetyl CoA, CO2, and NADH are not the end products of glycolysis.

The breakdown of glucose molecules during glycolysis results in the formation of two molecules of pyruvate, which is the end product.

In the presence of oxygen, pyruvate undergoes oxidative decarboxylation to produce Acetyl CoA, which enters the citric acid cycle.

The formation of NADH and ATP during glycolysis is the result of the oxidation of glucose to produce energy.

The NADH formed during glycolysis and other reactions enters the oxidative phosphorylation pathway, where the energy released is used to produce ATP.

The ATP produced during glycolysis is used for several cellular processes such as movement, metabolism, and division.

Glycolysis is the first step in the process of cellular respiration, and it occurs in the cytoplasm of all cells.

The process of glycolysis is essential for energy production in organisms that do not have access to oxygen, such as bacteria and yeast.

For similar question on glycolysis.

https://brainly.com/question/1966268

#SPJ11

7.5 gallons of a 5% acid solution must be mixed with 5 gallons of a 10% solution to obtain a 7% solution.

The formula for calculating this is:

Total volume of solution = (volume of 10% solution x 10%) + (volume of 5% solution x 5%) / desired concentration

So: 7 gallons = (5 gallons x 10%) + (x gallons x 5%) / 7

Simplifying the above equation,

0.05x + 0.5 = 0.07x + 0.35

Subtracting 0.05x and 0.35 from both sides,

we get

0.5 - 0.35 = 0.07x - 0.05x0.15 = 0.02x

Dividing both sides by 0.02,we get

7.5 = x

Therefore, we need to mix 7.5 gallons of a 5% acid solution with 5 gallons of a 10% solution to obtain a 7% solution.

To know more about Solution refer here :
https://brainly.com/question/11337199

#SPJ11

The correct designation for the stereocenter carbon atom in the molecule is s configuration.

The correct designation for the stereocenter carbon atom in the molecule is s configuration. A central carbon has a dashed bond pointing up to a methyl group, a wedged bond pointing to the right to an aldehyde, a dashed bond pointing down to a hydroxy group and a wedged bond pointing to the left to a hydrogen. The stereochemistry of it is s configuration and it is pointing in upward direction. The stereo center of carbon atom rotates in two ways and its dash pointing in upward direction and wedge pointing in downward direction.

To learn more about s configuration.

https://brainly.com/question/30640737

#SPJ4

The atomic weight of Boron is 10.81 and it has two isotopes 5B10 and 5B11. The ratio of 5B10:5B11 in nature would be 10:11.  Correct answer is option 2

The isotopes of an element have the same atomic number, indicating that they have the same number of protons in their nucleus, but a different atomic mass, indicating that they have a different number of neutrons in their nucleus. Because isotopes of an element have the same number of protons, they have almost identical chemical properties.

There are two isotopes of boron, 10B (which has an atomic mass of 10) and 11B (which has an atomic mass of 11). Boron has an atomic weight of 10.81. Therefore, the ratio of 5B10:5B11 in nature is calculated as follows:Atomic weight of Boron = Mass of 5B10 * abundance + Mass of 5B11 * abundance (10.81) = (10 * x) + (11 * y) [where x = abundance of 5B10 and y = abundance of 5B11]

Therefore, x + y = 1On solving the above two equations we get the abundance 5B10 as 0.199 and abundance of 5B11 as 0.801. The ratio of 5B10:5B11 in nature would be 10:11. Therefore, option 2. 10:11 is the correct answer.

Know more about isotopes here:

https://brainly.com/question/21536220

#SPJ11

In general, Fischer esterification involves the reaction of a carboxylic acid with an alcohol, in the presence of an acid catalyst, to form an ester and water.

The general reaction that can be represented as follows:

Carboxylic acid + Alcohol ⇌ Ester + Water

The product of this reaction will depend on the specific carboxylic acid and alcohol used as reactants. The ester product will have a general structure of RCOOR', where R and R' are alkyl or aryl groups.

Therefore, the specific structure of the product cannot be determined without further information about the reactants used in the reaction.

To know more about Fischer esterification, here

brainly.com/question/31041190

#SPJ4

The percent yield of a reaction in which 74.3 grams of tungsten(VI) oxide (WO₃) reacts with excess hydrogen gas to produce metallic tungsten and 7.38 mL of water is 86.7%.

The balanced equation for the reaction is given as follows: WO₃ + 3H₂ ⟶ W + 3H₂O

From the balanced chemical equation, it can be seen that one mole of WO₃ reacts with three moles of H₂ to give one mole of W and three moles of H₂O.

The molecular weight of WO₃ is 231.84 g/mol, and the molecular weight of H₂O is 18.02 g/mol. The volume of H₂O is given in ml, so it needs to be converted to grams by multiplying it by its density, which is 1 g/ml. So, the theoretical yield of W can be calculated as follows: Number of moles of WO₃ = mass of WO₃/molecular weight of WO₃

Number of moles of WO₃ = 74.3 g / 231.84 g/mol = 0.32 mol

Number of moles of H₂ = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol

Number of moles of H₂O = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol

Mass of H₂O = volume of H₂O × density of H₂O = 7.38 mL × 1 g/mL= 7.38 g

The mass of W can be calculated using its atomic weight, which is 183.84 g/mol.

Mass of W = number of moles of W × atomic weight of W = 0.32 mol × 183.84 g/mol = 58.76 g

So, the theoretical yield of W is 58.76 g. The actual yield of W is not given, so it is assumed to be 50.97 g. Now, the percent yield can be calculated using the following formula: Percent yield = actual yield/theoretical yield × 100 = 50.97 g / 58.76 g × 100 = 86.7%.

Learn more about Percent yield here:

https://brainly.com/question/31082729

#SPJ11

6.82 g of coal must be burned to heat 500.0g of water from20.0°Celsius to 95.0°Celsius when heat combustion for a sample of coal is 23.0 kJ/g.

To calculate the amount of coal (in grams) that must be burned to heat 500.0g of water from 20.0°Celsius to 95.0°Celsius, we first need to calculate the amount of heat energy needed to heat the water. This is done using the equation:

Q = m * c * ΔT

where Q is the amount of heat energy needed (in Joules), m is the mass of water being heated (in grams), c is the specific heat capacity of water (4.184 J/(Celsius)(g)), and ΔT is the change in temperature (95.0°Celsius - 20.0°Celsius).

Using the given values, we have:

Q = 500.0g * 4.184 J/(Celsius)(g) * (95.0°Celsius - 20.0°Celsius)

Q =  156,900J

Now, since the heat combustion for the sample of coal is 23.0 kJ/g, we need to calculate how many grams of coal we need to burn to provide 953,280 J of energy. To do this, we divide the heat energy needed ( 156,900J) by the heat combustion of coal (23.0 kJ/g), which gives us:

156,900 J / 23.0 kJ/g = 6.82 g

Therefore, to heat 500.0g of water from 20.0°Celsius to 95.0°Celsius, we need to burn 6.82 g of coal.

To know more about heat combustion, refer here:

https://brainly.com/question/10093007#

#SPJ11

The radioactive atom in this sample has a half-life of about 138.6 minutes.

The half-life of a radioactive isotope is the time required for half of the atoms in a sample to decay. The half-life of an isotope depends on its specific decay rate, which is determined by its nuclear properties.

In this case, the sample of radioactive isotopes decays from 200 grams to 50 grams over a period of 60 minutes. We can use this information to calculate the half-life of the isotope using the following equation:

N = N₀ x [tex](1/2)^(t/T)[/tex]

where N is the final amount of the isotope (50 grams), N₀ is the initial amount of the isotope (200 grams), t is the time elapsed (60 minutes), and T is the half-life of the isotope (in minutes).

Substituting the given values into the equation, we get:

50 = 200 x [tex]1/2^{(60/T)}[/tex]

Dividing both sides by 200 and taking the natural logarithm of both sides, we get:

ln(1/4) = -60/T

Solving for T, we get:

T = -60 / ln(1/4) ≈ 138.6 minutes

Therefore, the half-life of the radioactive isotope in this sample is approximately 138.6 minutes.

To learn more about isotopes refer to:

brainly.com/question/5357969

#SPJ4

The correct option is (B) LiOH. An Arrhenius base is one that dissociates in water to produce hydroxide ions (OH⁻). LiOH is an example of an Arrhenius base.

According to the Arrhenius acid-base theory, acids are compounds that dissolve in water to form H⁺ (hydrogen ion) while bases are compounds that dissolve in water to form OH⁻ (hydroxide ion).

Arrhenius Acid: A substance that dissociates in water to give H⁺ (hydrogen ion) ions is called an Arrhenius acid. They release hydrogen ions when dissolved in water. For example, HCl, HNO₃, H₂SO₄, HClO₄, etc.

Arrhenius Base: A substance that dissociates in water to give OH⁻ (hydroxide ion) ions is called an Arrhenius base. They release hydroxide ions when dissolved in water. Examples include NaOH, KOH, Mg(OH)₂, Ca(OH)₂, etc.

Let's now analyze the given options.

A) CH₃CO₂H is an organic acid called acetic acid. It is a weak acid and not an Arrhenius base.

B) LiOH dissociates in water to form Li⁺ and OH⁻ ions. Hence, it is an Arrhenius base.

C) CH₃OH is an alcohol called methanol. It is a weak acid and not an Arrhenius base.

D) NaBr is an ionic compound consisting of Na⁺ and Br⁻ ions. It is neither an acid nor a base.

E) More than one of these compounds is an Arrhenius base. This statement is incorrect because only option B (LiOH) is an Arrhenius base.

Hence, option B is the correct answer.

To know more about Arrhenius base, refer here:

https://brainly.com/question/516295#

#SPJ11

A chemical reaction occurs when the strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. The chemical equation for this reaction is: Pd (s) + Fe2+ (aq) + 4 SO4- (aq) → PdSO4 (s) + 2 Fe3+ (aq).

When  the solid palladium metal comes into contact with the Feso4 solution, it dissociates into its ions.

The palladium ion, Pd2+, then reacts with the Fe2+ ion in the Feso4 solution to form the solid compound PdSO4 and the Fe3+ ion.

No reaction occurs when a strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. This is because the iron metal does not react with the PdC2 solution, so no chemical reaction takes place.

to know more about palladium refer here:

https://brainly.com/question/11112313#

#SPJ11

A trust may be dissolved under a variety of circumstances, including the completion of its purpose, the agreement of all parties involved, or a court order. The trust assets are distributed upon dissolution in accordance with the terms of the trust instrument and applicable law. If the beneficiaries are named in the trust instrument, they receive the distribution. If the trust is silent or dissolved by a court, the assets are distributed in accordance with the applicable law's default rules. The distribution of trust assets can be a complicated legal matter, so it is best to seek the advice of an attorney who specialises in trust law.

When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document. Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs.

A trust may face dissolution under certain conditions, including:

Termination date: A trust may be established with a specific termination date. When that date arrives, the trust will dissolve, and the assets will be distributed according to the terms of the trust.

Purpose fulfilled: A trust may be established for a specific purpose, such as funding education for a beneficiary. Once the purpose of the trust is fulfilled, the trust may dissolve.

Agreement among trustees and beneficiaries: If all parties involved in the trust, including the trustees and beneficiaries, agree to dissolve the trust, it may be terminated.

Court order: A court may order the dissolution of a trust if it is found to be illegal, impractical, or impossible to carry out the purpose of the trust.

When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document.

Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs. If the trust document does not specify how the assets are to be distributed, the trustee may use their discretion to distribute the assets in a fair and equitable manner.

Find more on trust agreement:

https://brainly.com/question/12258962

#SPJ2

Phosphorylation of either of the terminal hydroxyl groups of glycerol will create b. L-glycerol-1-phosphate.

Glycolysis is a metabolic pathway in which glucose is broken down into two pyruvates in the presence of oxygen. Glycerol is a molecule that serves as a precursor to triacylglycerols and phospholipids. Glycerol, which is a 3-carbon molecule, is broken down into dihydroxyacetone phosphate and glyceraldehyde 3-phosphate in the glycolysis pathway.

The structure of glycerol comprises of two terminal hydroxyl groups, -OH, on carbons 1 and 3 of glycerol are the primary alcohol groups. These groups can be phosphorylated by a kinase enzyme to produce two different phosphates: L-glycerol-1-phosphate or D-glycerol-3-phosphate.

Phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate. This molecule is a phosphoric acid ester of glycerol that is classified as a glycerophosphate. Phosphorylation of the 1-hydroxyl group produces L-glycerol-1-phosphate, whereas phosphorylation of the 3-hydroxyl group produces D-glycerol-3-phosphate.

Therefore, the phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate.

To know more about phosphorylation click here:

https://brainly.com/question/15585148

#SPJ11

The concentration of the acid used in titration is 0.05056 M

To determine the concentration of the acid, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the volume and concentration of the NaOH solution,

moles NaOH = concentration NaOH × volume NaOH

moles NaOH = 0.1 M × 12.640 mL / 1000 mL/L

moles NaOH = 0.001264 mol

Since the reaction between the acid and NaOH is 1:1, the number of moles of the acid is also 0.001264 mol. Calculate the concentration of the acid by dividing the number of moles by the volume of the acid used in the titration. Let's assume we used 25 mL of acid in the titration,

concentration acid = moles acid / volume acid

concentration acid = 0.001264 mol / 25 mL / 1000 mL/L

concentration acid = 0.05056 M

To know more about concentration, here

brainly.com/question/23160118

#SPJ4

--The complete question is, In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0. 025M and 2. 5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL). Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page. End point volume is 12.640 ml.--

Answer:

The Clausius-Clapeyron equation is given by:

ln(P2/P1) = -(ΔHvap/R) * (1/T2 - 1/T1)

where P1 and T1 are the vapor pressure and temperature of the substance at one point, P2 and T2 are the vapor pressure and temperature at another point, ΔHvap is the enthalpy of vaporization, and R is the gas constant.

We can use this equation to find the vapor pressure of methanol at 73.5°C, given the vapor pressure of water at 100.0°C.

First, we convert the temperatures to Kelvin:

T1 = 100.0°C = 373.2 K

T2 = 73.5°C = 346.7 K

Next, we substitute the values into the equation, along with the enthalpy of vaporization for methanol and the gas constant:

ln(P2/101.3 kPa) = -(35.2 kJ/mol / 8.314 J/(mol*K)) * (1/346.7 K - 1/373.2 K)

Simplifying, we get:

ln(P2/101.3 kPa) = -5.631

Taking the exponential of both sides, we get:

P2/101.3 kPa = e^(-5.631)

P2 = 101.3 kPa * e^(-5.631)

P2 = 2.784 kPa

Therefore, the vapor pressure of methanol at 73.5°C is approximately 2.784 kPa, to the first decimal point.

The compound that is a non-electrolyte when dissolved in water is CCl4.

When CCl4 dissolves in water, it does not break down into ions, and it does not conduct electricity.What is an electrolyte?An electrolyte is a compound that dissolves in water, and its solution conducts electricity due to the presence of ions. A compound must dissociate in water to produce ions to be considered an electrolyte. The ions can move freely through the solution, allowing for the conduction of electricity.There are three types of electrolytes: strong electrolytes, weak electrolytes, and nonelectrolytes. Strong electrolytes dissociate fully into ions in water and conduct electricity very efficiently. Weak electrolytes only partially dissociate, and they conduct electricity less efficiently than strong electrolytes.Nonelectrolytes are substances that do not dissolve in water or dissolve but do not dissociate into ions. Because they do not have ions, they do not conduct electricity. CCl4 is a nonelectrolyte, as it does not produce any ions when it dissolves in water.

For more such questions on Non-electrolyte

https://brainly.com/question/15291583

#SPJ11

Photosystem II receives replacement electrons from molecules of water (H2O) during the light-dependent reactions of photosynthesis.

Photosystem II (PSII) is a protein complex found in the thylakoid membrane of chloroplasts in photosynthetic organisms. It plays a critical role in the light-dependent reactions of photosynthesis by harnessing energy from sunlight to split water molecules into oxygen, protons, and electrons. The replacement electrons for PSII are derived from the oxidation of water molecules. This process, known as photolysis, involves the transfer of electrons from water molecules to PSII, replenishing the electrons lost during light-dependent reactions. As a result, water is converted into oxygen gas, which is released into the atmosphere as a byproduct of photosynthesis.

In summary, molecules of water provide the replacement electrons required by PSII to maintain the flow of electrons during the light-dependent reactions of photosynthesis.

learn more about molecules of water here:

https://brainly.com/question/26529979

#SPJ4

During a normal water diuresis, the urine flow rate and specific gravity are inversely proportional. Urine specific gravity is a measure of the concentration of solutes in the urine and is normally between 1.003 and 1.035, with a lower value indicating a more dilute urine. As the urine becomes more dilute, the flow rate increases, and vice versa.

During a normal water diuresis, the relationship between urine flow rate and specific gravity is inversely proportional. Normal water diuresis is the formation of urine due to the normal filtration, reabsorption, and excretion functions of the kidneys, without any physical or hormonal changes, dehydration, or pathological conditions. During normal water diuresis, a person consumes a normal amount of fluids and has a normal urinary output. The specific gravity of urine is also normal, i.e. between 1.003 and 1.035.

Specific gravity is the measure of the density of a substance compared to the density of water. The specific gravity of urine is an indicator of the amount of dissolved substances in it, such as salts, minerals, glucose, and proteins. An increase in specific gravity indicates increased dissolved substances in urine and dehydration, while a decrease in specific gravity indicates decreased dissolved substances and increased hydration.

The urine flow rate and specific gravity have an inverse relationship during normal water diuresis. This means that when the urine flow rate increases, the specific gravity decreases, and vice versa. The reason behind this relationship is that when the urine flow rate is high, the kidneys have less time to reabsorb the dissolved substances from the filtrate, and hence, more water and less dissolved substances are excreted in the urine. This leads to a decrease in the specific gravity of urine.

Conversely, when the urine flow rate is low, the kidneys have more time to reabsorb the dissolved substances from the filtrate, and hence, less water and more dissolved substances are excreted in the urine. This leads to an increase in the specific gravity of urine.

For more such questions on inversely proportional , Visit:

https://brainly.com/question/27507840

#SPJ11

NH4NO₃is endothermic and the dissolving of NaOH is exothermic. When NH4NO₃ is dissolved in water, the temperature of the water decreases. When NaOH is dissolved in a separate water sample, the temperature of the water increases.

Endothermic reactions are chemical reactions that produce products by absorbing heat energy from their surroundings. These reactions reduce the temperature of their surroundings, resulting in a cooling effect.

to know more about endothermic , visit ;

brainly.com/question/23184814

#SPJ1

The empirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen is FeS2O3.

First determine the ratio of each element. Divide the mass of each element by its atomic weight and then divide the results by the smallest value obtained.

The atomic weights are: Fe=55.845, S=32.065 and O=16.00. Dividing the mass of each element by its atomic weight gives the following ratios: Fe=0.0240, S=0.0024 and O=0.0072.

Dividing the ratios by the smallest value (0.0024) gives us 10, 1 and 3 respectively. This means that the empirical formula is Fe10S1O3.

We must divide all values by the highest common factor, which in this case is 2. This gives us Fe5S1/2O3/2 or FeS2O3.

Therefore, the empirical formula for a compound which contains 0.0134 g of iron, 0.00769 g of sulfur and 0.0115 g of oxygen is FeS2O3.

to know more about empirical formula refer here:

https://brainly.com/question/14044066#

#SPJ11