C. As part of a base pair; at the 3' end in one polynucleotide strand describes its location.
Which functional group is found at the 3 ends of a polynucleotide?
The functional group that is at the end of the 3' end of the DNA is a hydroxyl group. The numbers on the carbon atoms in the pentose sugar of the nucleotides corresponding to the 3' end and the 5' end in DNA. At the 3' end, there is a hydroxyl group, made of an oxygen and hydrogen atom.
What is a nitrogenous base in DNA?
Nitrogenous base: A molecule that contains nitrogen and has the chemical properties of a base. The nitrogenous bases in DNA are adenine (A), guanine (G), thymine (T), and cytosine (C). The nitrogenous bases in RNA are the same, with one exception: adenine (A), guanine (G), uracil (U), and cytosine (C).
Why is adenine called a base?
Adenine and guanine have a fused-ring skeletal structure derived of purine, hence they are called purine bases. The purine nitrogenous bases are characterized by their single amino group (−NH 2), at the C6 carbon in adenine and C2 in guanine.
To know more about nitrogenous bases:
https://brainly.com/question/14120811
#SPJ4
How many particles are in 6.2moles of aluminum
There are [tex]3.97*10^2^4[/tex] particles in 6.2 moles of aluminum.
Given:
moles of aluminium = 6.2
Particle number = moles * Avagadros number
No of particles = [tex]6.2*6.02*10^2^3\\[/tex]
No of particles = [tex]3.97 * 10^2^4[/tex]
How do you calculate particles?
A number of particles = Avogadro constant the volume of the substance in mol is a formula for calculating the number of particles in a substance.
What is 1 mole?
A mole is the volume of a substance that contains 6.022 X 1023 of the substance's particles, atoms, ions, molecules, etc.A mole is a measurement unit for counting atoms, molecules, or ions.
Can your particles be equal to 1 mole?
1 mole = 6.022 × 10^23 particles.
To know more about 1 mole:
https://brainly.com/question/30337257
#SPJ1
How many atoms of carbon are in 300 molecules of CH3CO2H?
Answer:
there are 1.305
suppose you have implemented an algorithm in a method named foo, which takes an array of n floating point numbers as data. Suppose also that this algorithm has O(N3) best, average, and worst case time complexity and that a timing analysis of foo showed that approximately 2 seconds were required to process an array of size N = 256.What is the largest array (N) that foo could process in less than one hour?A. 512B. 1024C. 2048D. 4096
The largest array (N) that foo can process in less than an hour is 2048.
The algorithm is a logical sequence of problem-solving steps that are reviewed systematically.
The time complexity, T(n), is measured by the number of computational steps needed to run the algorithm as a function of input size n. The spatial complexity, S(n), is measured by the memory used by the data structure contained in the algorithm as a function of the input size n.
Using the magnitude of the algorithm's time/space complexity, we can determine the rate of increase in time (space) required by the algorithm as the input size n increases.
In the question:
N1³/N2³ = 3600/2 = 1800
N1³/ 2563 = 1800
N1³ = √1800 * 256
N1³ = 256 * 12.16
N1³ = 3114
so, it can process 3114 size lists.
So, out of the given option, the maximum array it can process in one hour is 2048.
Learn more about largest array at https://brainly.com/question/30532467
#SPJ4
How are inner planets different from outer planets?
A Inner planets have few moons and no rings.
B Inner planets have many moons and few rings.
C Inner planets have many moons and rings.
D Inner planets have no moons or rings.
Answer:
Hello! :))
A. Inner planets have few moons and no rings.
Inner planets have no rings, shorter orbits, have a slower spin, made of rock and metal. They also have few to no moons. The outer planets have many moons and are known as gas giants as they are made of gases.
Hope this helps! :3
A student mixes 0.100 L of 1.00 M HA with 0.200 L of 1.00 M MOH according to the reaction below:HA(aq) + MOH(aq) → H2O (l) + MA(aq)a) If the temperature of the solutions changed from 22.3 °C to 29.1 °C, calculate the heat evolved in this reaction. (Assume that the specific heat of the solution is 4.184 J/g°C and the density of the solutions is 1.00 g/mL)b) Calculate the enthalpy per mole of HAc) If 0.491 moles of HA is reacted with excess MOH, how much heat would be evolved?
a. The heat evolved in the reaction is 33.1 J
b. The enthalpy per mole of HAc is 331 kJ/mol
c. The heat evolved when 0.491 moles of HA is reacted with excess MOH is 161.4 J
What is the heat that evolved in the reaction?The heat evolved in the reaction can be determined using the equation of heat change as follows:
ΔQ = mcΔT,
where;
m is the mass of the solution,c is the specific heat capacity, andΔT is the change in temperature.The mass of the solution, m = density * volume
the total volume of the solution is 0.100 L + 0.200 L = 0.300 L
the density of the solutions is 1.00 g/mL
and the mass can be calculated as follows:
The mass of the solution = 0.300 L * 1.00 g/mL
The mass of the solution = 0.300 g
Therefore, the heat evolved in the reaction will be:
ΔQ = 0.300 g * 4.184 * (29.1°C - 22.3°C)
ΔQ = 33.1 J
b) The enthalpy per mole of HAc = ΔQ / n
where n is the number of moles of HAc
n = 0.100 L * 1.00 M
n = 0.100 moles
enthalpy per mole of HAc = 33.1 / 0.001
enthalpy per mole of HAc = 331 kJ/mol
c) The heat evolved when 0.491 moles of HA is reacted with excess MOH is determined as follows:
Heat evolved = 0.491 mol * 331 kJ/mol
Heat evolved = 161.4 J
Learn more about enthalpy per mole at: https://brainly.com/question/29295293
#SPJ1
what products would you expect from the reaction of ethylmagnesium bromide (ch3ch2mgbr) with each of the following reagents?
The Organic Product expected from the reaction of ethyl magnesium bromide (CH3CH2MgBr) is corresponding alcohol.
Since there is an electronegativity mismatch between carbon and oxygen, the carbon atom in the carbonyl group is electrophilic in nature. Carbonyl compounds react with nucleophiles such as Grignard reagent or organolithium reagent to make the appropriate alcohol. Ethyl magnesium bromide has the formula C2H5MgBr and is a Grignard reagent. It is commonly employed in the synthesis of organic molecules in the laboratory.
In addition to functioning as the synthetic equivalent of such an ethyl anion synthon enabling nucleophilic addition, ethylmagnesium bromide may be employed as a strong base to deprotonate a variety of substrates, including alkynes. Commercially accessible ethylmagnesium bromide is generally in the form of a solution in diethyl ether and tetrahydrofuran. It may be made in the same way as Grignard reagents are made by reacting bromoethane and magnesium in diethyl ether.
To know more about the Ethylmagnesium bromide, here
https://brainly.com/question/17173431
#SPJ4
In blank one, use IUPAC nomenclature to name the organic product of the reaction
of cyclopentanol and 1-butanol.
In blank 2, provide the common name of the organic product of the reaction.
1. ————————
2. ————————
IUPAC nomenclature for naming organic reaction products cyclopentanol and 1-butanol is 1. Cyclopentanone 2. Ketocyclopentane
What is IUPAC nomenclature?
The International Union of Pure and Applied Chemistry's (IUPAC) nomenclature of organic chemistry is a system for naming organic chemical compounds in chemical nomenclature (IUPAC). It appears in the Organic Chemistry Nomenclature (informally called the Blue Book). Every potential organic molecule should ideally have a name that can be used to generate a clear structural formula.
Inorganic chemistry has its own IUPAC terminology as well.
To learn more about IUPAC nomenclature, here
brainly.com/question/14379357
#SPJ1
The rate constant (k) for a reaction was measured as a function of temperature. A plot of lnk versus 1/T (in K ) is linear and has a slope of − 5780 K. Calculate the activation energy for the reaction
The value of the rate constants at various temperatures can be measured from the plot of ln K versus 1/T. The activation energy of the reaction obtained from the plot is
What is activation energy?The minimum excess energy that the reactants must acquire so as to have energy equal to the threshold energy for the reaction is defined as the activation energy.
In the plot of ln K versus 1/T the slope obtained is [ -Eₐ / 2.303 R ] and the intercept on the y -axis is equal to log A.
Here the slope in the plot is given as − 5780 K. Then the activation energy is calculated as:
Slope = -Eₐ / R
-5780 K = -Eₐ / 8.314 J/ mol.K
Eₐ = 8.314 J/ mol.K × 5780 K = 48054.9 J/ mol = 48.054 kJ.
Thus the activation energy of the reaction is 48054.9 J/ mol or 48.054 kJ.
To know more about activation energy, visit;
https://brainly.com/question/29801443
#SPJ1
Suppose Pasteur’s swan-necked flasks containing boiled broth became cloudy twenty-four hours afterboiling. Which choice could best explain the turbidity or cloudiness in the broth without supportingspontaneous generation?a.Endospores in the broth survived boiling and grew after the broth cooled.b.Contaminating organisms in the broth killed by boiling became alive again after the brothcooled.c.Chemicals in the broth came together to form living organisms.d.The broth allowed light to pass through it with less interference after boiling.e.Solid material in the broth dissolved during boiling
A) After the broth cooled, the endospores in it continued to grow despite the boiling process.
What experiment did Pasteur conduct to refute spontaneous generation?Spontaneous Generation Is False In 1858, Pasteur used a gun-cotton filter to filter air and discovered that it was full of microorganisms after microscopic study. This finding suggested that air exposure did not give broth a "life force," but rather airborne germs.
Can endospores be ruined by dry heat?For instance, wet heat at 100°C destroys Bacillus anthracis endospores in 2–15 minutes, whereas dry heat at 140°C can take up to 180 minutes to do the same task.
To learn more about Spontaneous Generation here:
https://brainly.com/question/29341891
#SPJ4
1) A 3.91 mol sample of Kr has a volume of 347 mL. How many moles of Kr are in a 6.30 L sample at the same temperature and pressure?
2) Hydrazine, N2H4 , reacts with oxygen to form nitrogen gas and water.
N2H4(aq)+O2(g)⟶N2(g)+2H2O(l)
If 3.15 g of N2H4 reacts with excess oxygen and produces 0.550 L of N2 , at 295 K and 1.00 atm, what is the percent yield of the reaction?
A 3.91 mol sample of Kr has a volume of 347 mL. 70.9mole of Kr are in a 6.30 L sample at the same temperature and pressure.
What is ideal gas?The ideal gas, sometimes known as the perfect gas, is a gas that, in physical behavior, corresponds to a certain idealized connection between pressure, volume, and temperature known as the ideal, or general, gas law.
This law is a generalisation that includes both Boyle's and Charles' laws as special instances, and it asserts that for a given quantity of gas, the combination of volume V as well as pressure P is proportionate to absolute temperature T; that is, PV = kT, where k is a constant. This type of relationship for a material is known as its equation of state, and it is adequate to define its gross behavior.
V[tex]_1[/tex]/n[tex]_1[/tex]=V[tex]_2[/tex]/n[tex]_2[/tex]
substituting all the given values, we get
347 / 3.91 = 6300/n[tex]_2[/tex]
n[tex]_2[/tex]=6300/88.74=70.9mole
Therefore, the number of moles is 70.9mole.
To learn more about ideal gas, here:
https://brainly.com/question/12677792
#SPJ1
A chemist has two solutions containing unknown salts in water. She determines that each has a solute concentration of 0.5 M. Which of the following will certainly NOT distinguish the two solutions from each other? choose one
-viscosity
-conductivity
-density
-vapor pressure
Viscosity, conductivity, and density are all physical properties that can be affected by solute concentration, but vapor pressure will not distinguish the two solutions from each other.
Vapor pressure is the pressure exerted by a vapor in equilibrium with its liquid or solid form. The vapor pressure of a solution depends on the vapor pressure of the pure solvent and the mole fraction of the solute. If two solutions have the same solute concentration, they will have the same mole fraction of solute and the same vapor pressure, even if they contain different salts.
Therefore, vapor pressure will not distinguish the two solutions from each other. However, viscosity, conductivity, and density can all be used to distinguish the two solutions. The viscosity of a solution depends on the size and shape of the solute molecules and their interactions with the solvent molecules. The conductivity of a solution depends on the presence of ions and their mobility. The density of a solution depends on the mass and volume of the solute and solvent. By measuring these properties, a chemist can determine the properties of the solute and determine if the two solutions are different.
Learn more about Viscosity:
brainly.com/question/30577668
#SPJ4
Two pure elements react to form a compound. One element is an alkali metal, X, and the other is a halogen, Z. What can you say about the compound?
a. It has the formula XZ
b. It does not dissolve in water c. It contains tonic bonds.
d. It contains covalent bonds.
What can be said about compounds of two pure elements that break apart is b. It does not dissolve in water
What are halogens?Halogens are one of six non-metallic elements that make up group 17 (Group VIIa) on the periodic table.
Group VIIa elements are called halogens which consist of fluorine (F), chlorine (Cl), bromine (Br), Iodine (I), and Astatine (At). The element has 7 valence electrons in the ns2 np5 subshell.
This electron configuration ultimately makes the halogen elements highly reactive. In addition, halogens also tend to absorb one electron to form a negatively charged ion.
If two pure elements react to form a compound. One element is the alkali metal X, and the other element is the halogen, Z, so these compounds will not dissolve in water.
Learn more about the heaviest alkaline earth metal here :
https://brainly.com/question/2624198
#SPJ4
match each type of intermolecular force correctly to the type of solution in which each is exhibited.
-ion-dipole forces
-ion-induced dipole forces
-dipole-induced dipole forces
-dispersion forces
Intermolecular force and the he type of solution in which each is exhibited:
Ion-dipole forces: Solutions where ions are dissolved in polar solvents, such as NaCl in water.Ion-induced dipole forces: Solutions where nonpolar solutes dissolve in polar solvents, such as iodine in ethanol.Dipole-dipole forces: Solutions where polar solutes dissolve in polar solvents, such as ethanol in water.Dispersion forces: Solutions where nonpolar solutes dissolve in nonpolar solvents, such as hexane in hexane.What are intermolecular forces?Intermolecular forces are the forces of attraction or repulsion between molecules. They determine the physical properties of a substance and are weaker than the covalent or ionic bonds within a molecule.
There are four main types of intermolecular forces: dispersion forces, dipole-dipole forces, hydrogen bonding, and ion-dipole forces. Each type of intermolecular force depends on the electric charge, shape, and size of the molecules involved.
Learn more on intermolecular forces here: https://brainly.com/question/26400206
#SPJ1
match the following words and definitions. 1. the splitting that occurs when the nucleus of an atom absorbs a neutron 2. giving off energy in the form of alpha particles, beta particles, or gamma rays 3. a small particle of an atom with a negative charge
4. the forming of larger atomic nuclei from smaller ones with a release of energy
radioactive fission electron
fusion
1. radioactive fission 2. giving off energy in the form of alpha particles, beta particles, or gamma rays 3. electron and 4. fusion
radioactive fission refers to the process of splitting the nucleus of an atom into smaller nuclei by absorbing a neutron. This often releases a large amount of energy and can produce radioactive isotopes as well as free neutrons. This process is used in nuclear reactors and weapons to generate energy and as a means of producing nuclear material.
The emission of energy in the form of alpha particles, beta particles, or gamma rays is a characteristic of radioactive decay. This occurs when an unstable nucleus sheds particles and energy to become more stable. Alpha particles are helium nuclei, beta particles are electrons or positrons, and gamma rays are high-energy photons.
An electron is a subatomic particle with a negative charge. It orbits the nucleus of an atom and plays a key role in chemical reactions and bonding. Fusion is the process of combining two atomic nuclei into a single, more massive nucleus. This releases a large amount of energy and is the process that powers the sun and other stars.
You can read more about atoms at https://brainly.com/question/17545314#:
#SPJ4
calculate and report the formula weight for the phosphate ion and calcium phosphate
The weight of a calcium phosphate molecule is 310 amu. Phosphate ion's formula weight is 95 amu.
How can the weight in the formula be determined?
There are 3 calcium molecules, 2 phosphate atoms, and 8 oxygen atoms in calcium phosphate.
The white solids known as calcium phosphates have nutritional value and are present in many living things, such as bone mineral and tooth enamel. Colloidal calcium phosphate (CCP), which is found in milk in micelles bound to casein protein and exists in a colloidal form, is also known as calcium phosphate.
Ca = 3 x 40 = 120 amu
in which P=231=62 amu
for O=8×16=128
So, 310 amu is the total weight.
Phosphate is a
P = 131 = 31 amu
O = 416 = 64 amu
Thus, 95 amu is the total weight.
To know more about calcium phosphate, check out:
brainly.com/question/29231164
#SPJ1
Which of these elements is/are known to form self-limiting oxide surface layers that are protective against further corrosion:A. IronB. AluminumC. ChromiumD. Copper
Aluminium and Chromium are known to form self-limiting oxide surface layers that are protective against further corrosion.
Stainless steel is a well-known example of an alloy that resists corrosion with the help of an oxide layer because the alloying element chromium (Cr) creates an impenetrable stable oxide layer (Cr2O3, also known as chromia) along the grain boundaries and surface.
The electrochemical process of anodizing transforms the metal surface into an attractive, long-lasting, corrosion-resistant anodic oxide finish. Although other nonferrous metals, such as magnesium and titanium, can also be anodized, aluminum is best suited for the process.
Normal protection for aluminum in air is provided by a molecule-thin layer of its own oxide.
To know about oxide
https://brainly.com/question/9496279
#SPJ4
How many grams of HGO can be produced by the complete reaction of 25.00 ml of liquid Hg?
The entire reactions of 25.00 ml of molten Hg can yield 5.416 g of HgO.
HgO can be dissolved or not.
HgO is 3.5 x 10-4 mol dm-3 in water soluble at 308 K.• When compared to 298 K, this temperature has a higher solubility in NaOH solutions. Furthermore, unlike at 298 K, when it is most soluble in water, the point of minimal absorption is in the very low alkaline area (Figure I).
The chemical equation that describes how Hg & O2 react to generate HgO is as follows:
2 Hg (l) + O2 (g) -> 2 HgO (s)
moles = 1 M * 0.025 L = 0.025 moles
Finally, to convert the number of moles to grams, multiply the number of moles by the molar mass of HgO, which is 216.59 g/mol.
mass = moles * molar mass
mass = 0.025 moles * 216.59 g/mol = 5.416 g
So, 5.416 g of HgO can be produced by the complete reaction of 25.00 ml of liquid Hg.
To know more about HGO visit:
https://brainly.com/question/14040101
#SPJ1
Pls help with the problem attached:
Mg 2+(aq) + 2NO2 -(aq) ⇒ Mg(NO2)2 (aq)
What is enthalpy?
In a thermodynamic system, energy is measured by enthalpy. Enthalpy is a measure of a system's overall heat content and is equal to the system's internal energy plus the sum of its volume and pressure.
The amount of heat released or absorbed during a reaction that takes place under constant pressure is referred to as the enthalpy change. The sign for it is H, which can be read as "delta H." If the system's enthalpy drops relative to the reaction, the reaction is preferred. A balanced chemical equation is followed by and on the same line as the enthalpy change for the reaction.
To learn more about enthalpy change use link below:
https://brainly.com/question/15174388
#SPJ1
Why does Jim say he is not including the location of Treasure Island in chapters 1-3 of Treasure Island?
A. He does not remember where it is.
B. There is still treasure on it.
C. It is too dangerous of a place.
D. He is ashamed of what happened there.
Jim say that he is not including in the location of Treasure Island because 'it is too dangerous of a place'.
What do you mean by Treasure Island?
Treasure Island is an 1883 adventure novel by Scottish author Robert Louis Stevenson. It tells the story of Jim Hawkins, a young man on a quest to find buried treasure on a tropical island. The novel is regarded as a classic of children's literature, and it is one of the most frequently dramatized novels of all time.
Treasure Island is a fictitious island full of danger and adventure. Jim understands that visiting this island would be dangerous, so he has decided to stay away. He believes it is too dangerous a location to include in his travels.
Hence, option C is correct.
To know more about the Treasure Island,
https://brainly.com/question/29636000
#SPJ1
Calculate the amount of heat in kilocalories needed to melt 56.0 g of ice at 0 °C and warm the liquid to 65 °C. His = 80. cal/g; Hvap = 540 cal/g; SH = 1.00 cal/g
Answer:
The amount of heat in kilocalories needed to melt 56.0 g of ice at 0 °C and warm the liquid to 65 °C is 10,368 kilocalories. This can be calculated using the equation Q = His + Hvap + SH(Tif-Ti), where His is the heat absorbed during solid-state, Hvap is the heat carried away by vaporization and SH is the specific heat of the substance. For ice, His = 80. cal/g, Hvap = 540 cal/g and SH = 1.00 cal/g. Tif is the final temperature and Ti is the initial temperature. In this case, Tif = 65 °C and Ti = 0 °C, so: Q = 80 + 540 + 1.00(65-0) = 10,368 kilocalories.
10,368 kilocalories is the amount of heat needed to melt 56.0 g of ice at 0 °C and warm the liquid to 65 °C.
What is heat?According to thermodynamics, heat is a type of energy that crosses a thermodynamic system's border due to a temperature differential across the barrier.
In a thermodynamic system, heat is not present. However the phrase is also frequently employed when referring towards the thermal energy that makes up a system's internal energy and is reflected in the system's temperature.
Q = His + Hvap + SH(Tif-Ti)
His =heat absorbed during solid-state
Hvap =heat carried away by vaporization
SH =specific heat of the substance
For ice, His = 80. cal/g
Hvap = 540 cal/g
SH = 1.00 cal/g.
Tif =final temperature
Ti =initial temperature
Tif = 65 °C
Ti = 0 °C
Q = 80 + 540 + 1.00(65-0) = 10,368 kilocalories.
Therefore, 10,368 kilocalories is the amount of heat needed to melt 56.0 g of ice at 0 °C and warm the liquid to 65 °C.
To know more about heat, here:
https://brainly.com/question/30132859
#SPJ2
Suppose that Daniel has a 2.50 L bottle that contains a mixture of O2 , N2 , and CO2 under a total pressure of 4.70 atm. He knows that the mixture contains 0.270 mol N2 and that the partial pressure of CO2 is 0.250 atm. If the temperature is 273 K, what is the partial pressure of O2 ?
The total pressure of a gas is defined as the sum of the partial pressures of the individual gases. The partial pressure of O₂ is 2.03 atm.
What is partial pressure?The partial pressure of a component gas in a mixture is defined as the pressure that gas would exert if present alone in the vessel at the same temperature as that of the mixture.
Total pressure, P = p₁ + p₂ + p₃ + ...
From the ideal gas equation the number of moles of N₂ can be calculated as:
PV = nRT (Ideal gas equation)
n = PV / RT
R is the gas constant (0.0821 )
n = 4.70 × 2.50 / 0.0821 × 273
n = 0.5243 mol
Mole fraction = Number of moles / Total number of moles
Mole fraction of N₂ = 0.270 / 0.5243 = 0.5149
Partial pressure of a gas = Mole fraction × Total pressure
pN₂ = 0.5149 × 4.70 = 2.420 atm
P = pO₂ + pN₂ + pCO₂
4.70 = pO₂ +2.420 + 0.250
pO₂ = 2.03 atm
Thus partial pressure of O₂ is 2.03 atm.
To know more about partial pressure, visit;
https://brainly.com/question/19250510
#SPJ1
what is the most efficient way to make a hepes buffer at ph 8.5? what starting compounds and reagents will you use? hint: start by choosing the right h-h equation. calculate from pka etc.
The most efficient way to make a herpes buffer at ph 8.5 is 7.55.
In chemistry, a compound is a substance made up of or greater different chemical elements combined in a fixed ratio. while the elements come collectively, they react with every other and shape chemical bonds which can be difficult to interrupt. those bonds form due to sharing or replacing electrons between atoms.
A chemical compound is a chemical substance composed of many equal molecules containing atoms from a couple of chemical elements held collectively by using chemical bonds. A molecule along with atoms of the most effective one detail is consequently not a compound. A compound is a material composed of or greater additives. Water, carbon dioxide, and desk salt are some examples of compounds.
To learn more about Compound visit here:
brainly.com/question/13516179
#SPJ4
What is the hybridization and the bond angle in SO3?
Answer and Explanation:
In SO3, sulfur is the central atom and is bonded to three oxygen atoms.
To determine the hybridization of the central atom in SO3, we first need to count the number of electron groups around the sulfur atom. An electron group can be a lone pair of electrons or a bond (single, double or triple bond) to another atom.
In SO3, the sulfur atom is bonded to three oxygen atoms, and there are no lone pairs on the sulfur atom. Therefore, the total number of electron groups around the sulfur atom is 3.
The hybridization of the central atom in SO3 is sp2. This means that the sulfur atom has three hybrid orbitals that are involved in bonding with the oxygen atoms.
The bond angle in SO3 is approximately 120 degrees. This is because the three oxygen atoms are arranged symmetrically around the central sulfur atom, with each bond angle at 120 degrees.
g which fo the numbered hydroxyl groups reacts wit ht the circled hydrogen atom to form the new covalent bond i nthe dissacharide
In a dissacharide, a new covalent bond is formed between the hydroxyl group of one sugar molecule and the hydroxyl group of another sugar molecule. The new bond, known as a glycosidic bond, is an acetal linkage.
The reaction occurs between the hydroxyl group (OH) and the hydrogen atom (H) that is bonded to an anomeric carbon, a carbon atom adjacent to a hemiacetal. The reaction between the two groups forms a covalent bond and breaks the O-H bond in the hydroxyl group.
In the process of glycosylation, the stereochemistry of the anomeric carbon is changed, resulting in the formation of either alpha- or beta-anomers. The specific hydroxyl group that reacts with the circled hydrogen atom to form the new covalent bond depends on the stereochemistry of the anomeric carbon and the orientation of the hydroxyl group in the ring.
Learn more about hydroxyl group:
brainly.com/question/23639315
#SPJ4
Which fo the numbered hydroxyl groups reacts wit ht the circled hydrogen atom to form the new covalent bond i nthe dissacharide.
A. Ethanol
B. Sugar molecule
C. ester
D. None of the above
Which example demonstrates divergence?(1 point)
Answer fast pls
Responses
Species A goes extinct.
Species A goes extinct.
Species A and B evolve into species C.
Species A and B evolve into species C.
Species A evolves into species B and C.
Species A evolves into species B and C.
Species A does not evolve.
The example that demonstrates divergence is as follows: Species A evolves into species B and C (option C).
What is divergence in biology?Divergence as it relates to evolution refers to an evolutionary process wherein a population of an inbreeding species diverges into two or more descendant species that have become more and more dissimilar in terms of forms and structures.
In essence, groups from the same common ancestor evolve and accumulate differences, resulting in the formation of new species.
According to this question, option C is the correct answer.
Learn more about divergence at: https://brainly.com/question/10541306
#SPJ1
what type of intermolecular forces exist between the following pairs: (a) hbr and h2s : dipole-dipole forces. (b) cl2 and cbr4, : dipole dipole forces. (c) i2 and no3-, : dipole-dipole forces. (d) nh3 and c6h6 : dipole-dipole forces.
The type of intermolecular forces existing between different pairs of molecules depends on the nature of the molecules involved.
(a) HBr and H2S: The intermolecular forces between HBr and H2S molecules are dipole-dipole forces. HBr is a polar molecule, with a partial positive charge on the hydrogen atom and a partial negative charge on the bromine atom. H2S is also a polar molecule, with a partial positive charge on the hydrogen atoms and a partial negative charge on the sulfur atom.
(b) Cl2 and CBr4: Cl2 and CBr4 are both nonpolar molecules, meaning they do not have a net charge distribution. As a result, the intermolecular forces between these molecules are dipole-dipole forces. These forces result from the interaction between the dipoles of the individual molecules.
(c) I2 and NO3-: I2 is a nonpolar molecule, while NO3- is a polar ion with a net negative charge. The intermolecular forces between these molecules are dipole-dipole forces, which occur between the dipoles of the individual molecules.
(d) NH3 and C6H6: NH3 is a polar molecule, with a partial positive charge on the hydrogen atoms and a partial negative charge on the nitrogen atom. C6H6 is a nonpolar molecule. The intermolecular forces between NH3 and C6H6 molecules are dipole-dipole forces, which occur between the polar NH3 and nonpolar C6H6 molecules.
In conclusion, the intermolecular forces between the pairs of molecules listed above are dipole-dipole forces, which are a result of the interaction between the polar or charged regions of the molecules.
Learn more about intermolecular forces:
brainly.com/question/9007693
#SPJ4
Use the following data to calculate the Ksp value for each solid.a. The solubility of CaC2O4 is 6.1 × 10−3 g/L.b. The solubility of BiI3 is 1.32 × 10−5 mol/L.
The solubility product constant (Ksp) of CaC2O4 is given by the equation: Ksp = [Ca₂⁺] x [C₂O₄²⁻] = (6.1 × 10⁻³)² = 3.721 × 10⁻⁵ g²/L².
The solubility product constant (Ksp) of BiI3 is given by the equation: Ksp = [Bi₃⁻] x [I⁻]³ = (1.32 × 10⁻⁵)³ = 2.228 × 10⁻¹⁵ mol³/L³.
The solubility product constant (Ksp) is a measure of the equilibrium between a solute and its saturated solution. It is calculated by multiplying the concentrations of the ions in the solution when the solution is saturated. When the Ksp value is greater than 1, the compound is considered to be soluble in water.
Learn more about the Ksp value:
https://brainly.com/question/25134328
#SPJ4
What is the best procedure for remove bubbles adhering to the surface of the metal?
1. None they do not need to be removed.
2. Swirling the contents of the cylinder with a glass rod.
3. Gently tapping the side of the graduated cylinder.
4. Shaking the graduated cylinder vigorously.
Initially, clean the surface, Isopropyl alcohol (IPA) and water used in a 50:50 ratio will usually work well to scrub away most stains. While water will eliminate dirt and collected dust, alcohol will dissolve light oil.
Which facilitates air bubble removal?To get rid of air bubbles, add borax or aluminum powder. Through this procedure, the air bubbles in the glass are released.Now that a gas or gas mixture has been introduced into the vessel 1's interior via the pressure attachment, the polymer solution P is being subjected to a superatmospheric pressure, which in this case is being produced by the gas or gas mixture that has been added, in order to remove the bubbles from the polymer solution P.Initially, clean the surface. Isopropyl alcohol (IPA) and water used in a 50:50 ratio will usually work well to scrub away most stains. While water will eliminate dirt and collected dust, alcohol will dissolve light oil.To learn more about bubble removal refer to:
https://brainly.com/question/20358021
#SPJ1
Define a vacuum.
Select one:
A. A vacuum is a negative pressure.
B. A vacuum is any pressure less than atmospheric pressure.
C. Vacuum is the reciprocal of pressure. For every pressure there is a reciprocal vacuum.
D. A vacuum is anti-pressure created by counterclockwise molecular rotation.
A vacuum is defined as any pressure less than atmospheric pressure. Therefore, option B is correct.
What do you mean by vacuum ?A vacuum is a space in which there is no matter or where the pressure is so low that any particles in the space have no effect on any processes that are taking place. It is a condition that is well below normal atmospheric pressure and is measured in pressure units (the pascal).
A vacuum is a space that is devoid of all matter. The term is derived from the Latin adjective vacuus, which means "vacant" or "void". A region with a gaseous pressure much lower than atmospheric pressure is an approximation to such a vacuum.
Thus, option B is correct.
To learn more about the vacuum, follow the link;
https://brainly.com/question/29242274
#SPJ1
Select the pair of substances in which the one with the higher vapor pressure at a given temperature is listed first.A)C7H16, C5H12 D)CH3CH2OH, CH3–O–CH3 B)CCl4, CBr4 E)Xe, Kr C)H2O, H2S
The pair of substances in which the one with the higher vapor pressure at a given temperature is CCl₄, CBr₄.
Vapour pressure is defined as a measure of the tendency of a material to change into the gaseous or vapour state, with increase in temperature. The temperature at which the vapour pressure of a liquid at the surface becomes equal to the pressure exerted by the surroundings is known as the boiling point of the liquid.
Let's see an example, water boils at sea level and its vapor pressure is 1 atmosphere because the external pressure is also 1 atmosphere.
Hence, the pair of substances in which the one with the higher vapor pressure at a given temperature is CCl₄, CBr₄.
Learn more about vapor pressure from the link given below.
https://brainly.com/question/2953540
#SPJ4