relative to you, your friend is 6.9 m to the east and 9.8 m to the south. how far away is your friend from you?

The difference between  specific heat, heat capacity, and latent heat can be defined as

Latent heat is the amount of heat energy required to change the phase of an object, such as from a solid to a liquid or a liquid to a gas, without changing its temperature. Specific heat and heat capacity describe the amount of heat energy required to change the temperature of an object, and the relationship between them is defined as heat capacity = mass * specific heat. The specific heat of a material is a property that depends only on the material, while heat capacity depends on both the material and the mass of the object.

You can learn more about Specific heat at

https://brainly.com/question/1401668

#SPJ4

The energy of photon that has a wavelength equal to the de Broglie wavelength of a proton is 42.04 × 10⁻⁶³ J.

It is given that

speed of photon, v = 7.1 × 10⁴ m/s

Mass of proton, m = 1.67 × 10⁻²⁷ kg

Speed of light, c = 3 × 10⁸ m/s

The formula for de Broglie wavelength is

λ = [tex]\frac{h}{mv}[/tex]

where h is the Planck's constant, h = 6.626 × 10⁻³⁴ Js.

So, de Broglie wavelength, λ = 6.626 × 10⁻³⁴ / 1.67 × 10⁻²⁷ × 7.1 × 10⁴

or, λ = 6.626 × 10⁻³⁴ / 11.857 × 10⁻²³

or, λ = 0.5588 × 10⁻¹¹ m

The energy of the photon is given by the relation,

E = (h/λ)²/2m

or, E = (6.626 × 10⁻³⁴/0.5588 × 10⁻¹¹)²/2 × 1.67 × 10⁻²⁷

or, E = (11.857 × 10⁻⁴⁵)²/3.34 × 10⁻²⁷

or, E = 140.42 × 10⁻⁹⁰/3.34 × 10⁻²⁷

or, E = 42.04 × 10⁻⁶³ J.

To know more about photon from the link

brainly.com/question/15946945

#SPJ4

An appropriate sample space Ω for this experiment is the set of all possible outcomes of the 4 tests. The event A⊂Ω corresponding to there being at least 3 rejected circuits in a row.

a) An appropriate sample space Ω for this experiment is the set of all possible outcomes of the 4 tests, where each outcome is a sequence of A's and R's. For example, if Ω = {AAAA, AAAR, AARA, ..., RRRR}, then each element in Ω represents a unique possible outcome of the 4 tests.

b) The event A⊂Ω corresponding to there being at least 3 rejected circuits in a row can be described as the set of all outcomes in Ω that have three or more consecutive R's. For example, if A = {RRRR, RRRR, RRRR, ...}, then A contains all the outcomes in Ω that have three or more consecutive R's.

In this experiment, the manufacturer is testing 4 integrated circuits and wants to determine if they meet quality objectives. The outcome of each test can either be "Accepted" (A) or "Rejected" (R). To describe the possible outcomes, we can create a sample space, Ω, which is a set of all possible outcomes of the 4 tests. Each element in Ω is a sequence of A's and R's, representing a unique possible outcome of the 4 tests. For example, Ω = {AAAA, AAAR, AARA, ..., RRRR}.

Learn more about sample space here:

https://brainly.com/question/24273864

#SPJ4

Mass spectrometers play an essential role in determining various aspects of a sample by measuring its mass and charge, making it a versatile and vital tool in a variety of industries. It can be used for determining sample composition, elemental concentration, properties of sample and atomic relative mass.

a) Sample composition - Determine a sample's composition by breaking it down into constituent components and measuring the masses of these components. This data can then be utilised to determine which elements and compounds are present in the sample.

b) Elemental concentration in sample - Detect the concentration of elements in a sample by measuring the abundance of each component in the sample.

c) Atomic relative mass - Measure atomic relative mass by detecting the mass of individual ions. This information is utilised to determine the atomic structure of a sample in domains such as atomic physics and chemistry.

d) Sample properties - Determine sample qualities such as molecular weight, chemical composition, and stability.

For more such questions Mass spectrometers.

https://brainly.com/question/4780013#

#SPJ11

It is incorrect to say that matter contains heat because heat is a flow of energy not an state function.

Matter is anything that occupies space and have mass, having mass means that it contains energy in itself, this energy is called internal energy.

This internal energy is different from the heat energy, the heat energy is completely different from any of the form of energy.

The heat energy flows continuously, it cannot be contains in any matter, when there is more heat the temperature goes up and when there is low heat, the temperature goes down. It is not a function related to the state the matter. This is why it is incorrect to say that the heat is contained by matter.

To know more about Heat, visit,

https://brainly.com/question/934320#:~:text=Expert%2DVerified%20Answer&text=Heat%20in%20a%20substance%20is%20still%20an%20example%20of%20heat,from%20one%20object%20to%20another.

#SPJ4

The rate of heat loss by radiation from a person in a room with walls at 300 K is approximately 325 W.

The rate of heat loss by radiation from a person in a room with walls at a temperature of 300 K can be calculated using the equation for Stefan-Boltzmann law. This law states that the rate of heat loss by radiation from an object is proportional to the fourth power of its temperature and the surface area of the object.

The equation for heat loss by radiation is given by:

Q = σ * A * (T^4 - T_0^4)

where:

Q is the rate of heat loss (in W)

σ is the Stefan-Boltzmann constant (5.67 x 10^-8 W/m^2 K^4)

A is the surface area of the person (in m^2)

T is the temperature of the person (in K)

T_0 is the temperature of the walls (300 K)

The surface area of an average person is about 1.7 m^2, and the average body temperature is about 310 K. Plugging these values into the equation, we can estimate the rate of heat loss by radiation:

Q = σ * A * (310^4 - 300^4)

Q = 5.67 x 10^-8 W/m^2 K^4 * 1.7 m^2 * (93,901,000 - 81,000,000)

Q = approximately 325 W

You can learn more about rate of heat loss at

https://brainly.com/question/30426933

#SPJ4

The internal energy of the meteor is 25000 kJ.

We to note that from the law of the conservation of energy that energy can not be created nor destroyed but that energy can be converted from one form to the other and that is the basis of the discussion that we are going to have in this problem.

We know that the internal energy of the meteor was converted to the kinetic energy of the meteor so we can now write that;

E = 1/2 mv^2

E = 0.5 * 50 * (1000)^2

= 25000 kJ

Learn more about energy:https://brainly.com/question/1932868

#SPJ1

Missing parts;

A 50-kg meteorite moving at 1000 m/s strikes earth. Assume the velocity is along the line joining earth's center of mass and the meteor's center of mass.

Calculate the internal energy.

There are 10^9 (1 billion) nanometers in a meter. The nanometer, which is one billionth of a metre, is a unit of length measurement in the metric system.

How does nanometer relates with meter?

The nanometer is a unit of measurement of length in the metric system, equal to one billionth of a meter. It was officially introduced as a unit of measurement in the SI (International System of Units) in 1960.

It is commonly used in various fields such as physics, chemistry, and engineering to describe very small lengths. For example, the diameter of a human hair is about 100,000 nanometers, and the wavelength of visible light ranges from 400 to 700 nanometers.

In comparison, one meter is equivalent to 100 centimeters, and a centimeter is equal to 10 millimeters. The nanometer provides a convenient and precise way to express extremely small distances.

To learn more about SI (International System of Units), visit: https://brainly.com/question/14288881

#SPJ4

Galileo discovered in his Leaning Tower of Pisa experiment that a heavier stone does not fall significantly faster than a lighter one. This is the third option.

The Italian scientist Galileo Galilei, which was then professor of mathematics at the University of Pisa, between 1589 and 1592 is said to have dropped two spheres of the same volume but of different masses from the Leaning Tower of Pisa to demonstrate that the time it took both to descent was not dependent of their mass.

Through his experiment, Galileo discovered that the objects fell with the same acceleration, which proved his prediction true. And it was, at the same time, disproving Aristotle's theory of gravity, stating that objects fall at speed proportional to their mass.

Learn more about Galileo and acceleration at https://brainly.com/question/29511941.

#SPJ4

The "point of maximum displacement" in physics is the point at which kinetic energy (K) and potential energy (U) are equal.

When an item reaches its greatest point of motion, where its velocity is zero and all of its energy is present as potential energy, this happens. At this time, the object's kinetic energy and potential energy are equal, and k = u.

This idea is frequently utilised in the study of mechanics and the analysis of motion of objects, such as in the computation of the highest point a bullet can travel, the most energy a spring can hold, or the most energy a simple pendulum can hold at its peak.

Learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ4

State function is a thermodynamics term, similar to entropy or enthalpy, that has a different value depending on the system's current state.

What are state functions?

A state function is a thermodynamic quantity whose value only depends on the current state, including the volume, pressure, temperature, etc. The history of the system's internal energy has no bearing on a state function's value. Molar enthalpy and entropy are state quantities because they quantitatively characterize a thermodynamic equilibrium state, regardless of how the system got there. A state function identifies the kind of system by defining equilibrium states of a system. Since a state variable is often a state function, the value of the state variable as the state function in an equilibrium state is also determined by the determination of the values of other state variables at that state.

To learn more about state functions visit;

https://brainly.com/question/29340540

#SPJ4

There are two different types of pints used in the US: a flowing pint ( 473 milliliter) and a more popular dry pint.

No, a pint and a pound do not equal one another, but the conversion is simple. If there is water: 1.25822 pounds are equal to one imperial pint. In the imperial units, a number can be converted from gallons to pounds by multiplying it by 1.2582 to get the same number in pounds.

The size of a thing is its magnitude. For instance, a car is travelling more quickly than a bike in terms of speed. The speed difference between the car and the bike in this case is greater. It reveals.

To know more about magnitude visit :

https://brainly.com/question/28173919

#SPJ4

(b) Both the inner and the outer radii increase - The whole sleeve will expand when the temperature increases as the thermal coefficient is positive so both radii will increase.

The coefficient of thermal expansion  is a characteristic of a substance that indicates how much it expands when heated. Various chemicals expand in varying degrees. The thermal expansion of uniform linear objects is proportional to temperature change over narrow temperature ranges. Bimetallic strips used in thermometer construction can benefit from thermal expansion, but when a structural section is heated and maintained at a constant length, internal stress can be deleterious.The majority of solid solids warm up and then expand and cool down.

Learn more about  thermal expansion

brainly.com/question/30242448

#SPJ4

The total charge of the earth needed to support such a field is −4.56 × 10⁵ C.

What is electric charge ?

The physical quality of matter—its electric charge—is what causes it to feel a force when exposed to an electromagnetic field. Protons and electrons, the two types of charge carriers, typically carry positive and negative electric charges. Charges moving through a system produce energy.

What is electric field ?

According to mathematics, the electric field is described as a vector field that may be connected to each point in space and represents the force per unit charge that is applied to a positive test charge that is at rest at that location. Either the electric charge or time-varying magnetic fields can produce an electric field.

Given

E = 100 N/C  inward

Flux =[tex]\dfrac{ q_{enclosed}}{\epsilon}[/tex]

−E(4πr2) =[tex]\dfrac{ q_{enclosed}}{\epsilon}[/tex]         as field is inward so flux is negative

⇒ [tex]q_{enclosed}[/tex] = −εE (4πr²)

⇒ [tex]q_{enclosed}[/tex] = −εE (4πr2)              

= −8.85 × 10⁻¹² × 100 × 4π × (6400×1000 m)²

= −4.56 × 10⁵ C

this charge may be coming because earth core is ionised and positively charged so on surface maybe negative charge induced.

Thus, The total charge of the earth needed to support such a field is −4.56 × 10⁵ C.

Learn more about electric charge from the given link.

https://brainly.com/question/1592046

#SPJ4

Complete question:

It turns out that there is an electric field that points inward toward the center of the Earth that has a magnitude of about 100 N/C near the Earth's surface. Estimate the total charge of the Earth needed to support such a field. Where do you think all this charge comes from?

The distance to each object using a baseline of 1000km is a)10313250 km b)31416000 km c)10313250000 km.

Parallax shift is the apparent shift of an object's position due to a change in the observer's point of view. In astronomical terms, it's used to measure the distance to nearby stars. The formula to calculate the distance (d) of an object using its parallax (p) and the baseline (b) is:

d = (1 / p) * (b / 2)

where p is expressed in radians. To convert from degrees (°), minutes (') or seconds (") to radians, we use the following conversions:

1° = (π / 180) rad

1' = (1° / 60) = (π / 10800) rad

1" = (1' / 60) = (π / 648000) rad

So for (a), 1° parallax:

d = (1 / (π / 180)) * (1000 / 2) km = (180 / π) * (1000 / 2) km = (180 / π) * 500 km = 206265 * 500 km = 10313250 km

For (b), 1' parallax:

d = (1 / (π / 10800)) * (1000 / 2) km = (10800 / π) * (1000 / 2) km = (10800 / π) * 500 km = 62832 * 500 km = 31416000 km

For (c), 1" parallax:

d = (1 / (π / 648000)) * (1000 / 2) km = (648000 / π) * (1000 / 2) km = (648000 / π) * 500 km = 206265000 * 500 km = 10313250000 km

So in each case, the distances are approximately 10313250 km for 1° of parallax, 31416000 km for 1' of parallax, and 10313250000 km for 1" of parallax, as measured from a 1000-km baseline.

To know more about parallax shift please refer:

https://brainly.com/question/2142886

#SPJ4

The complete question is:

At what distance is an object if its parallax, as measured from either end of a 1000-km baseline, is (a) 1°; (b) 1'; (c) 1"?

The pressure in a 0.5 m^3 vessel charged with 10 kg of carbon dioxide at 30°C can be calculated using the ideal gas law.

The ideal gas law states that the pressure (P), volume (V), number of moles (n), and temperature (T) of an ideal gas are related by the equation PV = nRT, where R is the gas constant. To calculate the pressure in the vessel, we need to know the number of moles of carbon dioxide, the volume of the vessel, and the temperature.

First, we can convert the mass of carbon dioxide (10 kg) to moles using its molar mass (44 g/mol):

n = 10 kg / (44 g/mol) = 0.227 moles

Next, we can calculate the pressure in the vessel using the ideal gas law:

P = (nRT) / V = (0.227 moles * 8.31 J/(mol*K) * (303 K)) / (0.5 m^3) =~ 59.3 atm

To learn more about pressure, visit:

https://brainly.com/question/12971272#

#SPJ11

The strength of the electric field at the position indicated by the dot in the figure is determined by the sum of the electric fields from each of the charges.

The direction of the electric field can be specified as an angle above or below the horizontal line. To calculate the directional angle of the electric field at the dot, you need to use the formula for the resultant electric field vector.

The formula for the resultant electric field vector is given by E = q1/r12 + q2/r22, where q1 and q2 are the charges of the two particles, and r1 and r2 are their respective distances from the point P.

The direction of the resultant electric field vector can be determined by taking the arctangent of the ratio of the x and y components of the electric field vector.

Learn more about The strength of the electric:

https://brainly.com/question/1332114

#SPJ4

The (x, y) coordinate where the shell exploded is (9861.56 m, 58041.32 m).

The horizontal and vertical displacement of the shell can be calculated using the following equations:

x = Vx * t

y = Vy * t - 0.5 * g * t^2

where

Vx = 300 m/s * cos(55) = 234.38 m/s (horizontal velocity)

Vy = 300 m/s * sin(55) = 224.14 m/s (vertical velocity)

g = 9.8 m/s^2 (acceleration due to gravity)

t = 42 s (time elapsed)

Plugging in the values we get:

x = 234.38 m/s * 42 s = 9861.56 m

y = 224.14 m/s * 42 s - 0.5 * 9.8 m/s^2 * 42^2 s^2 = 66946.16 m - 8904.84 m = 58041.32 m

So the (x, y) coordinate where the shell exploded is (9861.56 m, 58041.32 m).

Learn more about artillery shell here: brainly.com/question/12876054

#SPJ4

Putting an ice cube on a burger while grilling keeps the patty moist.

To know more about moisture visit:

https://brainly.com/question/217291

#SPJ4

Answer:

There are also reasons not to, but usually it keeps you on the road.

Explanation:

If I keep my vehicle straight behind the one in front of me, as long as they are fine I’m fine.
Although, if they make a mistake it’s easy to be too focused on following them than to save yourself.

Using the taillights of the vehicle in front of you to guide you in snowy conditions can help improve your visibility, provide guidance on the road ahead, and keep you centered and safe while driving in challenging conditions.

In extremely snowy conditions, visibility can be severely reduced, making it difficult to see the road ahead and navigate safely. Using the taillights of the vehicle in front of you can help guide you for several reasons:

(1) Contrast: The taillights of a vehicle provide a contrasting light against the white background of the snow, making it easier to see and follow the vehicle in front of you.

(2) Visibility: The taillights are usually positioned higher up on the vehicle than the brake lights, making them more visible above the snow drifts or other obstacles on the road.

(3) Indicators: The taillights provide indicators of the vehicle in front's movements, such as when they are turning or slowing down. By paying attention to these indicators, you can anticipate the actions of the vehicle ahead and react accordingly.

(4) Centering: Following the taillights of the vehicle in front can help keep you centered on the road and prevent you from accidentally veering off course.

To learn about the amplitude of a wave click:

https://brainly.com/question/29775285

#SPJ2

The way to find the magnitude and direction of the resultant force is to use the formula for the resultant force, such as:

1. The resultant unidirectional force: R = F1 + F2 + F3 + … +Fn

2. Opposite: R = F1 – F2

3. Perpendicular force: R = √F1^2 + F2^2

In the term of physics, The magnitude generally can be defined as the length of the vector while the direction tells us which way the vector points. Vector direction or also known as magnitude direction can be given in various forms, but is most commonly denoted in degrees. There are several examples of vector direction, such as Acceleration and velocity. Vectors generally can be defined as any unit that have both magnitude and direction.

Here you can learn more about vector direction https://brainly.com/question/110151

#SPJ4

E=ර/ε is the formula that determines the electric field between parallel plate capacitors .

This is according to Gauss' law which states that  the electric field remains constant and is independent of the distance between two plates of the capacitor.

Electric field is a region around a charged particle within which a force would be exerted on other charged particles.

Gauss Law states that the total electric flux is equal to the charge enclosed by an imaginary surface divided by the permittivity.

A capacitor is a device working on the principle of capacitance that is used in an electrical circuit to store charges.

To know more about capacitor, visit:

https://brainly.com/question/13578522

#SPJ4

Average acceleration when the particle completes half revolution​ is 18 m/s^2.

If you whirl a ball on the string over your head, then the ball is undergoing centripetal acceleration. If you drive a car around in circle, then your car is undergoing centripetal acceleration.

The average acceleration of a particle moving in a circular path is given by the formula: a = v^2/r, where v is the velocity of the particle and r is the radius of the circular path.

For the given particle, the velocity is 6 m/s and the radius is 2m. Therefore, the average acceleration is given by a = v^2/r = 6^2/2 = 18 m/s^2.

To know more about centripetal acceleration, refer

https://brainly.com/question/79801

#SPJ1

The following definite integral may be used to define the length of the curve Y = ln(csc(x)) from x = 0 to x = b: ∫ 0^b √[1 + (dy/dx)^2] dx

Where dy/dx is Y = ln(csc(xderivative, )'s.

This may be determined by applying calculus methods. The precise length of the curve over the specified interval can be calculated using numerical techniques or approximations by evaluating this definite integral. A continuous, smooth line that bends and diverges from being straight is said to be in a curve. It may be a two-dimensional illustration of a mathematical formula, a geometric figure, or an occurrence in nature. In several disciplines, including engineering, physics, biology, and economics, curves are used to explain a wide range of ideas and things. Calculus and differential equations can be used to examine curves, which can be parametric, polar, or Cartesian in mathematics. Curves' size, location, and other characteristics can have a significant impact on numerous applications and academic fields.

learn more about curve here:

https://brainly.com/question/29736815

#SPJ4

Joule discovered that if a pressure is increased but then given time to expand together into condition in an unit that cannot interchange heat with its surroundings, the increasing gas does not produce any energy.

Nikola Tesla was an innovative genius whose discoveries and concepts have had a significant impact on modern life. Because of his findings, Tesla is sometimes referred to as the "father of energy."

Joule heating, often known as Joule's law, is the process by which reluctance in a circuit transforms electric energy onto heat energy. The Joule is the work unit or energy in the Si unit (J). A force of one Newton travelling one meter within its own direction produces the work equivalent to one joule.

To know more about Joule visit:

https://brainly.com/question/25065819

#SPJ4

Answer:

2.4 m/s

Explanation:

The formula for speed is s = d/t

We have the distance and time so plug those numbers in

623/4.22   We can't divide the number like this so...

Convert the 4.22 into seconds >>>  240 + 22 = 262

Now we can divide the numbers.

623/262 = 2.37786259542

If we round up the speed then it is about 2.4 m/s.

The velocity of a Simple Harmonic Oscillator is half of its maximum velocity at a distance of 0.50A from x-O.

A Simple Harmonic Oscillator is a physical system that undergoes periodic motion, such as a mass attached to a spring. The motion of a simple harmonic oscillator can be described by the equation of motion:

x = A * cos(ωt),

where x is the displacement from the equilibrium position, A is the amplitude of the motion, ω is the angular frequency, and t is time.

The velocity of a Simple Harmonic Oscillator can be derived from the displacement equation:

v = dx/dt = -A * ω * sin(ωt).

The maximum velocity of a Simple Harmonic Oscillator occurs when the displacement is at its maximum value, which is at x = A. At this point, the velocity is equal to -A * ω * sin(ωt) = -A * ω. The velocity is half of its maximum value when sin(ωt) = 0.5, which occurs when t = π / (2ω). At this time, the displacement is x = A * cos(π / (2ω)) = A * √(0.5), or approximately 0.50A from x-O.

Learn more about oscillator here:

https://brainly.com/question/28994371

#SPJ4

The process of heating a cooled cup of coffee from 55°F to 130°F is an example of endothermic reaction. Endothermic reactions absorb energy in the form of heat and result in an increase in temperature. The coffee absorbs the energy from the microwave, causing its temperature to rise.

Heat reactions, also known as thermochemical reactions, are chemical reactions that involve a change in temperature. These reactions can either be endothermic or exothermic. Endothermic reactions absorb heat and result in a decrease in temperature, while exothermic reactions release heat and result in an increase in temperature. Heat reactions play an important role in many industrial processes such as chemical synthesis, power generation, and food preparation. They can also occur in biological systems, where heat energy is used to drive metabolic processes. Understanding heat reactions is essential for developing sustainable energy technologies, controlling environmental pollution, and improving human health.

Learn more about heat reactions:

brainly.com/question/2192784

#SPJ4

Air is less dense at very high elevations because the air pressure decreases with increasing height.

Elevations are the heights of land above sea level or a datum. They are typically measured in meters or feet. Elevations are used to measure the height of mountains, hills, and valleys, as well as the depth of the ocean. They are also used in many applications such as surveying, engineering, and mapping. Elevations are important for a variety of reasons, including determining the height of a building, calculating the amount of water in a river, and predicting the effects of climate change. Elevations are also used to determine the safety of a structure or area, as areas with higher elevations tend to have better protection from flooding and other natural disasters.

To learn more about elevations

https://brainly.com/question/30358594

#SPJ4

The time required to complete one vibration in the density of the medium is referred to as the sound wave's time period.

It is denoted by the letter T. Its SI unit comes in second (s).

Given: [tex]C = 1522m/s[/tex]

λ = [tex]4.2*10^{-2} m[/tex]

Frequency of soundwave can be determine by

f = c/λ

[tex]f = \frac{1522}{4.2*10^{-2} }[/tex]

f = 3.623

Period of sound wave is given by:

[tex]T = \frac{1}{T}[/tex]

[tex]T = \frac{1}{3.623}[/tex]

[tex]T = 0.27601[/tex]

Therefore, the period of sound wave is 0.27601 s.

Learn more about Wavelength here

https://brainly.com/question/26848221

#SPJ4