rationalize the temperature dependence of the solubility of a gas in water in terms of the kinetic molecular theory.

The number of oxygen atoms are in each formula unit of barium hydroxide are two.

We have a barium hydroxide chemical compound which is made up of one atom of barium, two atoms of hydrogen, and two atoms of oxygen. The chemical or molecular formula of Barium Hydroxide is Ba(OH)₂. The chemical formula always helps to determine the ratio of elements present in it . Here, in one mole of barium hydroxide has one mole of barium atom, two mole of hydrogen atoms and two mole of oxygen atoms. Hence, the number of oxygen atoms in one unit of barium hydroxide is 2.

To learn more about barium hydroxide, refer:

https://brainly.com/question/29344018

#SPJ4

Complete question:

The chemical formula for barium hydroxide is: Ba(OH)₂. how many oxygen atoms are in each formula unit of barium hydroxide?

Tetra chlorocarbon Carbon tournament is a colorless, non-flammable liquid with a strong, pleasant smell. Prior to 1970, both commercial and domestic usage of carbon tet as a cleaning agent was common.

The chemical compound known as carbon tetrachloride has the chemical formula CCl4. It is also referred to by several other names, including tetrachloromethane, which is also recognized by the IUPAC, graphite tet in the cleaning business, Halon-104 in firefighters, and Refrigerant-10 in HVACR.

Tetrachloromethane, commonly known as carbon tetrachloride, is a colorless, thick, very poisonous liquid that is volatile and nonflammable. It is a member of the family of chemical halogen compounds and is mostly used to make dichlorodifluoromethane, a refrigerant chemical propellant.

To know more about Carbon visit :

https://brainly.com/question/22530423

#SPJ4

Answer:rusting is irreversible because the oxygen in the air reacts with the material and causes a chemical reaction

Explanation:

its not reversible because nothing you can do will make it bring back the material besides like rust treatment which a body shop does and they have to add material back to the spot

Trixie Bell consumes 96.28 g of protein daily.

First, let's calculate the amount of protein in the grain Trixie Bell consumes daily. If 0.75 lb of grain contains 14% digestible protein, that means 0.75 lb x 14% = 0.105 lb of protein in the grain.

Next, let's calculate the amount of protein in the hay Trixie Bell consumes daily. If 4.25 lbs of hay contain 2.5% digestible protein, that means 4.25 lbs x 2.5% = 0.10625 lb of protein in the hay.

Finally, let's add up the amount of protein in both the grain and hay to find the total amount of protein Trixie Bell consumes daily. So, 0.105 lb + 0.10625 lb = 0.2125 lb of protein daily.

To convert pounds to grams, we multiply by 453.59: 0.2125 lb x 453.59 g/lb = 96.28 g of protein daily.

Therefore, Trixie Bell consumes 96.28 g of protein daily.

To learn more about protein:

https://brainly.com/question/884935

#SPJ4

20.22 volume of 0.1379 M HCl is required to neutralize 10.0 ml of 0.2789 M NaOH solution.

Sodium hydroxide (NaOH) and Hydrochloric acid (HCl) react in a 1:1 mole ratio to produce an aqueous sodium chloride (NaCl) and water.

NaOH (aq) + HCl (aq) → NaCl (aq) + H₂O (l)

Molarity is termed as the number of moles of the solute present in 1 L of solution.

The sodium hydroxide solution, which has a molarity of 0.2789 M is

0.2789 / 0.1379 = 2.022

times more concentrated than the hydrochloric acid solution, which has a molarity of 0.1379 M. In other words, for the same volume of both solutions, the sodium hydroxide solution contains 2.022 times  more moles of solute than the hydrochloric acid solution.

Since the sodium hydroxide solution has a volume of 10.0mL, it follows that the volume of hydrochloric acid needed will be

[tex]V_{HCl}[/tex] = 2.022 × 10.0

= 20.22 mL

To know more about molarity here

https://brainly.com/question/8732513

#SPJ4

According to the information provided, the percent yield of the reaction is 83.3%.

Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.

In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.The percent yield for the given reaction is  50/60×100= 83.3 %.

Thus, the  percent yield of the reaction is 83.3%.

Learn more about percent yield,here:

https://brainly.com/question/2506978

#SPJ1

Considering the solutions: 0. 04 m acetone [(ch3)2c=o)], 0. 04 m agno3 and 0. 04 m cacl2,

The osmotic pressure is the least amount of pressure that must be applied to a solution in order to block the passage of the solution's pure solvent through a semipermeable membrane.

Reducing the amount of solvent molecules that escape into the vapour phase also reduces the pressure that the vapour phase exerts. This is referred to as a relative decrease in vapor pressure.

Any material's boiling point is the temperature at which it changes from the liquid phase into the gas phase. For water, this occurs at 100 degrees Celsius.

Learn more about Solution problems:

https://brainly.com/question/14153986

#SPJ4

Phytoplankton play an important role in the carbon cycle because A. photosynthesis by phytoplankton removes carbon from the atmosphere

Phytoplankton, which is microscopic aquatic plants, play a crucial role in the global carbon cycle. They perform photosynthesis, which is the process of using light energy to convert carbon dioxide and water into organic matter.

This process removes carbon dioxide from the atmosphere and converts it into biomass, which can then be used by other organisms or eventually sink to the ocean floor and is buried, removing carbon from the active carbon cycle.

Thus, phytoplankton plays an important role in regulating the amount of carbon dioxide in the atmosphere and mitigating the effects of climate change.

Read more about phytoplankton here:

https://brainly.com/question/15901563

#SPJ1

Reaction C would likely proceed the fastest, as H2O is a very strong nucleophile, capable of reacting quickly with the substrate. Reaction A would likely proceed the slowest, as NN=OH is a weaker nucleophile than H2O and is less likely to react quickly with the substrate.  

In nucleophilic substitution reactions, the rate of the reaction depends on the stability of the substrate, the strength of the nucleophile, and the ability of the leaving group to leave. In general, the reaction rate increases as the nucleophile strength increases and the leaving group ability decreases.

Given the three reactions:

A. CH2=CH2 + Br- → CH2=CHBr- + H+ (NN=OH is the nucleophile)

B. CH2=CH-CO2- + H2O → CH2=CHOH + CO32- (N=CH2 is the nucleophile)

C. CH2=CH2 + H2O → CH2=CHOH + H3O+ (N=H2O is the nucleophile)

Reaction C would likely proceed the fastest, as H2O is a very strong nucleophile, capable of reacting quickly with the substrate. Reaction A would likely proceed the slowest, as NN=OH is a weaker nucleophile than H2O and is less likely to react quickly with the substrate. The rate of reaction B would likely fall in between A and C, as the nucleophile N=CH2 is moderately strong. However, without more information on the reaction conditions and the specific reactants involved, it is difficult to say for certain which reaction would be the fastest or slowest.

To learn more about nucleophile:

https://brainly.com/question/28325919

#SPJ4

180 u is the molecular mass of glucose C6H12O6 molecule

What is molecular mass ?

Molar mass is the mass of one mole of a substance, defined as its atomic or molecular mass in grams.  It is defined as the number of units (atoms, molecules, ions, etc.) in a substance that contains the same number of units as 12 grams of pure carbon-12. The molar mass of a substance is important because it provides a conversion factor between the  mass of a substance and the number of moles of a substance, allowing chemical reactions and composition of compounds to be more easily calculated. Molar mass can be calculated by summing the atomic masses of all atoms in a molecule of a substance. For example, the molar mass of water (H2O) is 18.015 g/mol. This means that 1 mole of water weighs 18.015 grams .

To know more about molecular mass , click the link below ;

https://brainly.com/question/837939

#SPJ4

The vapor pressure of a solution is the pressure exerted by the vapor above the solution. The vapor pressure of a solution depends on the concentration of the solute in the solution. The lower the vapor pressure, the more concentrated the solution is.

Explanation:

In order to decrease the vapor pressure of a solution to 22.0 torr, we need to find the amount of glucose that needs to be dissolved in 100.0 g of water. We can use the relation between the vapor pressure of the solution and the concentration of the solute in the solution to solve this problem.

The vapor pressure of a solution is proportional to the mole fraction of the solute in the solution. The mole fraction of a solute in a solution is defined as the ratio of the number of moles of solute to the total number of moles of solute and solvent in the solution.

Let's call the mole fraction of glucose in the solution x. Then, the mole fraction of water in the solution is 1 - x. The vapor pressure of the solution is given by:

P = P° H2O x + P° glucose (1 - x)

where P° H2O is the vapor pressure of pure water (23.5 torr) and P° glucose is the vapor pressure of pure glucose (which is negligible compared to the vapor pressure of water).

We know that the vapor pressure of the solution is 22.0 torr and the mole fraction of glucose in the solution is x. So, we can write:

22 = 23.5 x + 0 (1 - x)

Simplifying the above equation, we get:

22 = 23.5 x

x = 22/23.5 = 0.939

The mole fraction of glucose in the solution is 0.939. This means that 0.939 moles of glucose are present in 1.939 moles of glucose and water in the solution.

We know that the mass of water in the solution is 100.0 g. So, we can calculate the number of moles of water in the solution as:

n = m/M

where m is the mass of water in the solution, M is the molar mass of water (18.02 g/mol), and n is the number of moles of water in the solution.

n = 100.0/18.02 = 5.551 moles

The number of moles of glucose in the solution is given by:

n = 0.939 x n

n = 0.939 x 5.551 = 5.20 moles

Finally, the mass of glucose in the solution is given by:

m = n x M

where M is the molar mass of glucose (180.2 g/mol).

m = 5.20 x 180.2 = 939.44 g

Thus, 939.44 g of glucose would need to be dissolved in 100.0 g of water to decrease the vapor pressure of the solution to 22.0 torr.

Here you can learn more about The vapor pressure

https://brainly.com/question/14617982#

#SPJ11

The stereoisomers of 2-chloro-5-methyl heptane Iis in the 2 chloro 5 methyl hectare.

In stereochemistry, stereoisomerism, or spatial isomerism, is a form of isomerism wherein molecules have an equal molecular method and series of bonded atoms, however, fluctuate inside the 3-dimensional orientations in their atoms in area.

Stereoisomers are isomers that fluctuate inside the spatial arrangement of atoms, in preference to the order of atomic connectivity. one in every of their most exciting sort of isomers is the replicate-image stereoisomer, a non-superimposable set of molecules that are a replicate image of one another. Stereoisomers are isomeric molecules with identical chemical formulas but exceptional atomic arrangements. for this reason, they own similar chemical and physical homes.

Learn more about stereoisomers here:-

brainly.com/question/24128816

#SPJ4

The substance that is not a pure substance is the correct option is A. Aerated water.

A pure substance with the single kind of the atom is known as the element, and it cannot be broken into the two or more simple substances. The pure substance with the combination of the two or the more elements are the compounds.  The substances which contain the two or more substances together is called as mixture.

Thus, aerated water is not the pure substance. The carbon dioxide is the compound and the oxygen and the zinc are the purest form of the element.

To learn more about pure substance here

https://brainly.com/question/3696566

#SPJ4

[n] has 2 subsets that contain exactly one of the elements 1 and 2. These subsets are {1} and {2}.

A subset is a collection of elements from a larger set, such that all elements of the subset are also elements of the larger set. Every set is considered a subset of itself. In other words, a subset is a smaller set that is fully contained within a larger set.

For example, consider the set A = {1, 2, 3}. The subsets of A are:

The empty set, denoted as {} or Ø, is a subset of A (since every element of Ø is also an element of A)

{1} is a subset of A

{2} is a subset of A

{3} is a subset of A

{1, 2} is a subset of A

{1, 3} is a subset of A

{2, 3} is a subset of A

{1, 2, 3} is a subset of A, and is equal to A itself.

So, in total, there are 2³ = 8 subsets of A.

To know more about subsets, visit:

https://brainly.com/question/23454979

#SPJ4

Alcohol CH3CH2OH has a molar mass of 46.07 (molecular masses: Carbon = 12 u, H = One u, and O = 16 u).

Alcohols are a class of chemical compounds that include substances like ethanol, CH3CH2OH, which has a hydroxyl group, or -OH, attached to a carbon atom. A chemical molecule called ethanol is combustible and colorless. It is present in alcoholic beverages.

A The three various ways that the molecular formula for ethanol can be written—CH3CH2OH (which shows the existence of an ester bond, CH3CH2 and an OH group), C2H5OH and C2H6O—all reveal that the compound contains carbon - carbon double bonds, six hydrogen, and one oxygen atom.

To know more about CH3CH2OH visit :

https://brainly.com/question/15077866

#SPJ4

The processes have a negative enthalpy change, the correct option is D. I, II and III.

I) 2CH₃OH(l)  +  3O₂(g)  --->  2CO₂(g)  +  4H₂O(l)

Enthalpy change = ∑product - ∑reactant

Enthalpy change =  (  2(-395.5)  + 4( -285.8) - 2 (-238.4)

Enthalpy change  = -1280 kJ = -ve

II) HCl(aq)  +  NaOH(aq)  ---->  NaCl(aq)  +  H₂O(l)

Enthalpy change = ∑product - ∑reaction

Enthalpy change  = - ve

II) H₂O(g)   --->  H₂O(l)

Enthalpy change = ∑product - ∑reactant

Enthalpy change  = - 285.8  - ( -238.4)

Enthalpy change  = - ve

Thus, all the value of the change in the enthalpy is negative.

To learn more about enthalpy here

https://brainly.com/question/3393755

#SPJ4

Mole is a unit of measurement used to measure the amount of a chemical substance, with 1 mole containing 6.022 x 1023 atoms, or 1.204 x 1024 atoms.

A mole is a unit of measurement in chemistry that is used to determine the quantity of a chemical. It is described as the quantity of a material containing the same number of particles (atoms, molecules, ions, and so on) as there are atoms in 12 grammes of carbon-12.

2 moles of Ca have 2 x 6.022 x 1023 atoms. This is due to the fact that the mole (mol) is a unit of measurement used to determine the quantity of a chemical compound. 1 mol of a material corresponds to 6.022 x 1023 atoms of that substance. As a result, 2 moles of Ca contain 2 x 6.022 x 1023 atoms, or 1.204 x 1024 atoms.

To know more about mole, visit

brainly.com/question/26416088

#SPJ1

Examples of the process that are always spontaneous: Combustion of fuel

Examples of the process that are never spontaneous: Photosynthesis

Formation of fuel from CO2 and water

Forming diamonds from coal

Which reaction is spontaneous and non-spontaneous?

Processes have a natural tendency to go in one direction under certain conditions.Spontaneous processes are processes that occur naturally under certain conditions.

A non spontaneous processes, on the other hand, occur only when they are "driven" by a continuous supply of energy from outside.

A process that is never spontaneous

All processes that do not occur spontaneously have in common a positive change in enthalpy ΔH and a negative change in entropy ΔS.

The Gibbs free energy is calculated as ΔG = ΔH - TΔS, so if ΔH is positive and TΔS is negative, ΔG is always positive and the reaction will not occur spontaneously.

For example:

Always a spontaneous process

All spontaneous processes have in common that they have a negative change in enthalpy ΔH and a positive change in entropy ΔS.

Since the Gibbs free energy is calculated by the formula ΔG = ΔH − TΔS, ΔG is always negative and the reaction is always spontaneous if ΔH is negative and TΔS is positive.

For example: Combustion of fuel

Hence, Examples of the process that are always spontaneous: Combustion of fuel

Examples of the process that are never spontaneous: Photosynthesis, Formation of fuel from CO2 and water, Forming diamonds from coal.

To learn more about spontaneous and non-spontaneous, click on the given link: https://brainly.com/question/4248860

#SPJ4

Because neurons are full of proteins that tend to be negatively charged, they tend to attract positively charged ions.

The interior of neurons is filled with a variety of proteins that have a negative charge. This negatively charged environment tends to attract positively charged ions, such as sodium (Na+) and potassium (K+) ions. The movement of these ions across the cell membrane and into the interior of the neuron is an important aspect of neuronal signaling and communication.

In neurons, the movement of positively charged ions is regulated by ion channels and pumps, which control the flow of ions in and out of the cell. This regulation is critical for maintaining the resting potential of the neuron and for transmitting signals along the length of the neuron. For example, when an electrical signal reaches the end of a neuron, the ion channels there open, allowing positively charged ions to flow into the cell. This creates a change in the electrical potential of the neuron that triggers the release of neurotransmitters, which can then activate other neurons or target cells.

In summary, the negatively charged environment inside neurons attracts positively charged ions, which play a crucial role in neuronal signaling and communication.

Learn more about neurons here:

https://brainly.com/question/29368083

#SPJ4

The pH of a 0.5 M solution of sodium bisulfate ([tex]NAHSO_{4}[/tex]) is approximately 1.

pH is a measure of the acidity or basicity of a solution, with a pH of 7 considered neutral, a pH less than 7 considered acidic, and a pH greater than 7 considered basic. The pH is determined by the concentration of hydrogen ions (H+) in the solution.

Sodium bisulfate ([tex]NAHSO_{4}[/tex]) is a strong acid, meaning that it dissociates completely in water to form hydrogen ions (H+) and sulfate ions ([tex]SO_{4} ^{2-}[/tex]). The concentration of hydrogen ions in a 0.5 M solution of sodium bisulfate is equal to the concentration of the bisulfate ions, meaning that the pH of the solution would be around 1.

To learn more about pH, visit:

https://brainly.com/question/15289714#

#SPJ11

The catalyzed reaction: 2SO₂ + O₂ → 2SO₃, the catalyst in the reaction is the NO.

The catalyzed reaction is as :

2SO₂ + O₂ → 2SO₃,

Thought the following mechanism is as follows :

Step 1 : 2NO + O₂ → 2NO₂                               slow

Step 2 : 2NO₂ + 2SO₂ → 2NO + 2SO₃            fast

Therefore, The catalyst is the NO.

The intermediate in the mechanism is NO₂.

The rate of the reaction = Rate = k[NO]²[O₂] .

The substance that is increases the rate of the chemical reaction without  undergoing any of the permanent chemical change is called as catalyst.

To learn more about mechanism here

https://brainly.com/question/16023581

#SPJ4

C) 'Solubility of ionic solids increases greatly with temperature' is an incorrect statement about solubility. When a dissolving reaction is exothermic, the solubility may drop as the temperature rises.

The maximum quantity of a chemical that will dissolve in a given amount of solvent at a particular temperature is referred to as its solubility. When a solute dissolves in a solution, heat energy is released in an exothermic process. More heat enters the system as the temperature rises. The system will adapt to this extra heat energy by stifling the dissolving process in accordance with Le Chatelier's Principle.

For instance, a water-sodium hydroxide solution. The process is endothermic if the energy needed to break the bonds is more than the energy released upon the creation of the solute-solvent bond. An illustration of an endothermic process Ammonium chloride solution in water.

Learn more about solubility here https://brainly.com/question/28170449

#SPJ4

We are given information about a patient's body fluids and their volumes of distribution, as well as their osmolarity. We are then asked to calculate the effects of different scenarios on the water and solute levels in the patient's ECF (Extracellular Fluid) and ICF (Intracellular Fluid).

The osmolarity of a patient's body fluid is a measure of the total concentration of solute particles in the fluid and is calculated in osmoles per litre (OsM). To calculate the osmolarity, we multiply the concentration of each solute by its corresponding volume of distribution and then sum the results. In this case, the osmolarity of the patient's body fluid is 0.295 OsM.

To determine the amount of solute (osmoles) in each compartment, we multiply the osmolarity by the volume of distribution for each compartment. For the deuterium oxide, there are 42 litres * 0.295 OsM = 12.39 osmoles. For inulin, there are 13 litres * 0.295 OsM = 3.785 osmoles. For Evans blue, there are 2.8 litres * 0.295 OsM = 0.82 osmoles.

When the patient ingests 1 L of water, the total volume of ECF increases, but the osmolarity remains the same. This means that the volume of ICF decreases to maintain the osmotic balance. Therefore, the volume of ECF increases to 43 litres, while the volume of ICF decreases to 11 litres. The osmolarity of both compartments remains the same at 0.295 OsM.

When the patient ingests 0.18 moles of NaCl, the NaCl dissociates into Na+ and Cl- ions. These ions will move freely between the ECF and ICF to maintain osmotic balance. Since the ECF has a larger volume, most of the ions will end up in the ECF, causing its osmolarity to increase. Therefore, the volume of ECF remains the same, but its osmolarity increases to 0.6 OsM. The volume of ICF decreases to 11 litres, and its osmolarity decreases to 0.09 OsM.

When the patient receives an intravenous infusion of 2 L of 0.9% NaCl solution, the volume of ECF increases, and its osmolarity increases. The volume of ECF increases to 45 litres, and its osmolarity increases to 1.095 OsM. The volume of ICF decreases to 9 litres, and its osmolarity decreases to 0.07 OsM.

To learn more about osmolarity here:

https://brainly.com/question/29698326#

#SPJ11

a) The molarity of base is 0.0795 Mol/dm^3

b) The Concentration of hydroxyl ion in g per 250 cm³ of the solution is  19.9 g

c) Mass of sodium tetraoxosulphate [VI] formed is 0.21 g

If we have that;

1.3 g of the acid is contained in the  250 cm³ solution

x is contained in the 1000 cm³ solution

x = 5.2 g/dm^3

Molar concentration of the acid =  5.2 g/dm^3/ 98 g/mol

= 0053 mol/dm^3

Then we have that;

CAVA/CBVB = NA/NB

Thus;

CAVANB = CBVBNA

CB = CAVANB/VBNA

CB = 0053  * 18.75 * 2/25 * 1

CB = 0.0795 Mol/dm^3

b) Concentration in gg per 250 cm³ of the solution = 0.0795 Mol/dm^3 * 1 dm^3 * 250cm^3

= 19.9 g

Number of moles of the acid = 0.0795 Mol/dm^3 *  18.75 /1000 L

= 1.49 * 10^-3 moles

c)  If 1 mole of the acid yields 1 mole of the salt 1.49 * 10^-3 moles

Then the mass of the salt = 1.49 * 10^-3 moles * 142 g/mol

= 0.21 g

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

1. The motion of the electrons in the Rutherford model was stable. F

2. The energy of an electron depends on the size of the orbit and is lower for smaller orbits. T

The model depicted the atom as a tiny, dense, positively charged core called a nucleus, in which nearly all the mass is concentrated, and around which the light, negative constituents known as electrons circulate at some distance, similar to planets revolving around the Sun.

3. The magnitude of the wave function at a particular point in space is inversely proportional to the amplitude of the wave at that point. F

4. The azimuthal quantum number (l)tells the average relative distance of an electron from the nucleus. T

5. The Magnetic quantum number (ml) describes the orientation of the region in space occupied by an electron with respect to an applied magnetic field. F

Thus, The motion of the electrons in the Rutherford model was not stable.

To learn more about the Rutherford model, follow the link;

https://brainly.com/question/11749615

#SPJ1

Atomic mass of oxygen is 16.

What is Atomic mass?

Atomic mass is the mass of an atom of a chemical element, expressed as the relative mass of a single atom of the element. It is the total mass of protons, neutrons, and electrons in the nucleus of an atom, and is usually expressed in atomic mass units (amu). Atomic mass is an important factor in determining the physical and chemical properties of an element, and is used in many calculations related to atomic structure, reactions, and physical and chemical properties of materials. It is also a measure of the total energy of an atom, and is related to the mass-energy equivalence of Einstein's Theory of Relativity. Atomic mass is determined by the number of protons and neutrons in the nucleus of an atom, and is affected slightly by the number of electrons in the atom.

Therefpre, Atomic mass of oxygen is 16.

To learn ore about Atomic mass

Here: https://brainly.com/question/30390726

#SPJ4

To Calculate an Effective Nuclear Charge is mentioned below.

What is nuclear charge?

All of the protons' combined charges make up the nuclear charge. Since effective nuclear charge considers all electron behavior, regardless of whether they are part of the valence shell or the inner shell, it should be used instead of nuclear charge.

What is charge?

A charged particle's ability to start an action or move an item is known as electrical energy. Electrical energy is produced as a result of electrons moving between atoms. Electrical energy is used to operate appliances like toasters and phone chargers every time you put them into a wall socket.

The net positive charge felt by the valence electrons is the effective nuclear charge. Zeff = Z - S, where Z is the atomic number and S is the quantity of shielding electrons, is an equation that can be used to calculate it roughly. Every element has a valence shell, which is its outermost shell.

Therefore, to Calculate an Effective Nuclear Charge is mentioned above.

Learn more about nuclear charge from the given link.

https://brainly.com/question/713760

#SPJ4

The activation energy for a particular reaction is 37.8 kj/mol. If the rate constant at 280 k is 0.178 m/s, then 2.14 m/s is the value of the rate constant at 385 k.

A reaction rate constant, also known as a reaction rate coefficient, in chemical kinetics. Here, [A] and [B] are the molar concentrations of substances A and B in moles per unit volume of solution, assuming the reaction is occurring throughout the volume of the solution, and k is the reaction rate constant that depends on temperature. Partial orders of reaction have exponents m and n, which are not always equivalent to the stoichiometric coefficients a and b. Instead, they are dependent on the reaction process and are amenable to experimental determination.

[tex]K = Ae^{Ea/RT}[/tex]

[tex]0.178 = Ae^{(-37,800 J/mol / (8.314 J/molK ×280 K))\\}[/tex]

A = 3.44 x 10¹¹

k = (3.44 x 10¹¹) × [tex]e^(-37,800 J/mol / (8.314 J/mol×K ×385 K))[/tex]

k = 2.14 m/s

To know more about rate constant, here:

https://brainly.com/question/20305922

#SPJ12

The molality of an aqueous solution that is 6.2% by mass calcium chloride with 1.18 g/mL density is 0.0528 mol/kg.

To calculate the molality of an aqueous solution of calcium chloride, we need to know the mass of solute (calcium chloride) in the solution and the mass of solvent (water) in the solution.

First, let's convert the concentration from percentage by mass to grams of solute per kilogram of solvent:

6.2% = 6.2 g/100 g = 0.062 g/g = 0.062 g/1000 g = 0.062 g/kg

Next, we need to determine the mass of water in the solution. We can use the density of the solution to do this. Assuming the volume of the solution is 1 mL, we have:

mass of water = volume * density = 1 mL * 1.18 g/mL = 1.18 g

Finally, we can use the mass of solute and mass of solvent to calculate the molality:

molality = moles of solute / kilograms of solvent = 0.062 g / 1.18 g = 0.0528 mol/kg (rounded to four decimal places)

Learn more about molality here: https://brainly.com/question/26921570

#SPJ4