Engineering High School

QUESTIONS
22
Brakes that automatically stop a trailer if it breaks away from the towing vehicle are required on
all trailers weighing
A: 3,000 pounds or more
B: 5,000 pounds or more.
C: 10,000 pounds or more

Answers

Answer 1

Answer:

According to many of the states' driving rules.

All vehicles of 3,000 pounds or more are required to have a brake system that makes them break as a response to the breaking of the vehicle's tow.

Explanation:

The reason behind this answer is that vehicles of more than 3,000 pounds are extremely dangerous and difficult to control. Therefore, when the tow breaks the automatic brake system is required. Because they are too big to be controlled, and if they are left without a brake system to reduce their damage they can destroy entire houses or other cars if this mechanism is not implemented.

Answer 2

The automatic brakes helps to stop a trailer from the towing vehicle and are these required on all trailers weighing 3,000 pounds or more.

What is the automatic braking system?

The system is an advanced system that are designed to prevent collision or reduce speed of the moving vehicle.

The reason for this modern technology in trailers is because the vehicles of more than 3,000 pounds are extremely dangerous and difficult to control.

Therefore, when the tow breaks the automatic brake system gets into action.

Read more about automatic brakes

brainly.com/question/26004382

Related Questions

What is the major difference between a disk clog and a disc harrow?

Answers

The major difference is nothing

Students are expected to respond to one of the two questions described below. Students should provide examples to clarify their response.

1. Manufacturing systems may be classified into types, such as customized production, batch production, and continuous production. Describe examples of how each product type is applied; cite examples of products that are produced as customized, batch, and continuous.

2. The interchangeability of parts increases the effectiveness of manufacturing processes. Describe situations where parts are developed to be interchangeable and why this is important for industry.

Answers

Answer:

can u explain what we are answering?

Explanation:

An insurance company can refuse to renew a policy because of your:

Answers

A company cannot refuse to renew your policy unless it has been in effect for at least 12 months. This means a company must renew a six-month policy to give you a full 12 months of coverage. The company must give you 30 days' notice before refusing to renew your policy

Which of the following distinguishes the question asked by a development team conducting a survey of potential customers to determine what features they want in a new product? a. What are the characteristics of the product? b. What need does the product address? c. What will make the most effective design solution? d. When does the project need to be complete?

Answers

Answer:

The question that distinguishes the question asked by the development team surveying potential customers to determine what features they want in the new product is:

c. What will make the most effective design solution?

Explanation:

The reason behind this answer is that d) talks about the delivery date of the product, not about the features of it. A) talks about the general characteristics of the product without satisfying a need. b) talks about the need the products seek to fulfill, but they are not trying to identify the need for the product. But to improve it, as they already have a need very clear to be fulfilled. Therefore, c) which talks about how to improve its design to be more acceptable to that group will provide the information to persuade them.

name the author the "the journey to the centre of the earth"​

Answers

Answer:

The author of "the the journey to the centre of the earth" is Jules Verne.

Explanation:

Hope it helps you!!

Answer:

Jules Verne

Explanation:

Jules Verne is the author of the book

what is the
engineering

Answers

Engineering is the profession which deals with building the structures like bridge,house,roads etc.

Hope it helps...

Engineering is the use of scientific principles to design and build machines, structures, and other items, including bridges, tunnels, roads, vehicles, and buildings. Please mark as brainlest and thanks :)

Describe the are of mechanical engineering

Answers

Answer:

Mechanical engineering is an engineering discipline that combines engineering physics and mathematics principles with materials science to design, analyze, manufacture, and maintain mechanical systems.

Bcc. Chilling. Vvcfgjkl

.provide feedback to the controller about the robot's environment, a limited sense of sight and sound

Answers

Answer:

go to settings and u may figure out

Tell students that animals, including humans, use their senses to collect data from the environment. This collected data is used to help make decisions; for example, if you touch a hot stove, you will pull your hand away, or if you see that the street is clear of cars, you know it is okay to cross the street. These senses are important because they provide important feedback about the environment.



Have the class participate in naming the different senses humans use; sight, hearing, touch, taste, and smell. Have students share ideas on how humans collect data from the environment using these five senses. Ask: What do these senses tell you about your environment? Elicit answers from students that reflect decision-making. For example, touch can tell you if something is too hot or too cold. Hearing can tell you the type of environment you’re in. Sight can tell you how far away obstacles might be.



Introduce students to the idea that robots also use senses, in the form of sensors, to collect information from the environment. Ask: Why do robots need sensors? Explain that robots need sensors to make decisions about tasks, like how to move or where to go next. Just like a student needs to wait until there is no traffic to cross the street, a robot needs to have an understanding about its surroundings. Ask: How do humans use their senses to make observations about their surroundings? Answers should include seeing what’s around them, hearing noises that give them clues to what’s nearby, and feeling items that might be near them.



Ask students to each draw a map of the classroom or room they are in. Give them a few minutes to make their maps. After students have finished making their maps, ask: What senses did you use to make your maps? Most students will have relied heavily on their sense of sight. Ask: If you could not see, what other senses could you use? Explain that some robots make maps of their environment using their various senses.

what are the four essential components of a UAS?

Answers

Answer:

Explanation: UAS is an acronym with the meaning Unmanned Aerial Systems. Unmanned aircraft system (UAS) means an unmanned aircraft and the equipment to remotely control it. Unmanned aircraft (UA) means any aircraft operating or fashioned to operate independently or to be piloted remotely without an actual pilot on board.

Unmanned Aerial Systems consist of four core components which are as following:

Unmanned Aircraft,

Control Center,

Control Link, and

Payload.

Additionally, UAS has four elements which affect the safe use of this technology these and they are : The Environment,

The Operation,

The Crew, and

The Supporting Organization.

Does it jiggle? Does it really jiggle jiggle?

Answers

Answer: Yes ma'am it really jiggle jiggle

it really do be jiggling



Which of the following describes boundaries?
(1)Boundaries are primarily used to indicate which functions a user will perform as opposed to the functions that a product will perform.
(2)Boundaries are primarily used to indicate which functions a product will perform as opposed to the functions that a user will perform.
(3)Boundaries are always used to indicate which functions a product will perform and never used for the functions that a user will perform.
(4)Boundaries are rarely used to indicate which functions a product will perform and are always used for the functions that a user will perform.

Answers

Answer:

The correct option is;

(2) Boundaries are primarily used to indicate which functions a product will perform as opposed to the functions a user will perform

Explanation:

Product specifications accompanying most products, specifies the product  boundaries and limitations which are to be acceptable to (or meet the requirement of) the intended user

The intended user has the option to then set boundaries of use of the product within his possession.

A local surf report provides the height of the wave from the trough to the crest of the wave. How does this relate to the wave’s amplitude?

Answers

Answer:

The relationship between the provided height of the wave from the trough to the crest of the wave and the wave's amplitude is;

It is about twice the wave amplitude

Explanation:

The amplitude of a wave is the measured distance of a particle on the wave  that moves from the rest position to the point of maximum displacement. Hence it is the distance between the crest or through and the rest position

Therefore, as the surf report provides the height of the wave from the through to the crest of the wave, it is twice about twice the wave amplitude.

Other Questions
According to the circular flow diagram, the government purchases products from __________.A.firmsB.householdsC.foreign governmentsD.government agenciesPlease select the best answer from the choices providedABCD Who is the doctor that speaks to the judge before the hearing? What does our knowledge about him say about Ponyboy and the hearing? When cells come together they form........., which make up organs, which arepart of organ systems, which work together toform an entire organism. To understand the experiment that led to the discovery of the photoelectric effect.In 1887, Heinrich Hertz investigated the phenomenon of light striking a metal surface, causing the ejection of electrons from the metal. The classical theory of electromagnetism predicted that the energy of the electrons ejected should have been proportional to the intensity of the light. However, Hertz observed that the energy of the electrons was independent of the intensity of the light. Furthermore, for low enough frequencies, no electrons were ejected, no matter how great the intensity of the light became. The following problem outlines the methods used to investigate this new finding in physics: the photoelectric effect.Suppose there is a potential difference between the metal that ejects the electrons and the detection device, such that the detector is at a lower potential than the metal. The electrons slow down as they go from higher to lower electric potential; since they must overcome this potential difference to reach the detector, this potential is known as the stopping potential. To reach the detector, the initial kinetic energy of an ejected electron must be greater than or equal to the amount of energy it will lose by moving through the potential difference.(A) If there is a potential difference V between the metal and the detector, what is the minimum energy E_min that an electron must have so that it will reach the detector?Express your answer in terms of V and the magnitude of the charge on the electron, e.(B) Suppose that the light carries energy E_light. What is the maximum stopping potential V_0 that can be applied while still allowing electrons to reach the detector? Express your answer in terms e, E_light, and . True or false A sedentary life is best for overall health Answer quick please i will mark brainliest:1. 5 3/4 + 2 11/122. 5 1/2 - 1 2/73. 5 1/2 - 2 11/124. 5 3/4 - 2 11/125. 3 1/3 + 4 1/126. 7/10 - 1/47. 11/18 + 3/9 8. 4 1/12 - 3 1/3 9. 13/15 - 2/510. 2 5/6 + 3 2/5 11. 11/18 - 1/6 Describe the overall shape of the histogram. You work for a zoo where you manage the breeding program for the cheetah. Your goal is to prevent inbreeding by obtaining mates from other zoos, making sure that your cats produce healthy offspring. In analyzing the genes of the cheetahs in all the zoo breeding programs, you notice very little variety of traits (alleles). Select all of the following conclusions which could be supported by your findings?a. All of the zoo cheetahs come from just a few common ancestors. b. The number of individual cheetahs currently in Zoos must be very low. c. The variety of trats found in wild cheetahs is very narrow, possibly due to only a few of the animals surviving some event or series of events in thepast. d. Even aner several generations, the baby cheetahs produced at your zoo wil show very ame geneto variaton. One of the most desirable of the old British sports cars was the beautiful Triumph Vitesse (1963-1971). Pictured below is the American version, called the Sports 6. A little expensive back in the day, only 679 were sold. Imagine you are on vacation, and for fun you and your companion select a cool, beautiful day in Gansu Province and ride the G30 highway from Lanzhou to the Mogao caves in Dunhuang, about distance of 686 miles. If you consume gasoline according to:2 C8H18(l) + 25 O2(g)? 16 CO2(g) + 18 H2O(g)what volume of carbon dioxide gas would be produced by this motoring trip if your fuel consumption was 21.2 miles per gallon? Note that the density of gasoline is 0.805g/cm3, and one mole of any gas at 760 mmHg and 0oC is 22.4 L. what is the slop of the line represented by y= 5x - 7 During the industrial revolution, who demanded reform? Read the excerpt from Blanca Flor.The Narrator. Juanito took the thimble and started to carry the water from the lake. He worked as hard as he could, but soon he began to realize that the job really was an impossible one, and he knew he was doomed. He sat down and began to cry because his luck had abandoned him and because his parents' blessings offered no protection in that evil place. Blanca Flor watched Juanito's valiant effort to move the water. As she watched him crying, her heart was touched, and she decided to use her powers to help him. She knew that it was very dangerous to use her powers to help Juanito and to cross Don Ricardo, but she felt it was finally time to end her own torment. As Juanito cried, Blanca Flor took out her brush and began to brush his hair. She cradled Juanito in her arms and her soothing comfort soon put him to sleep . . .[As soon as JUANITO is asleep, BLANCA FLOR gently puts his head down and leaves, taking the thimble with her.]What do the stage directions at the end of the excerpt indicate? What is occurring at the end of this process? *Genes(code foramino acids)ChromosomeAmino acidsjoin togetherto form proteins)mRNADNARibosome(translatesmRNA toamino acids)CellProteinNucleus(containsgenome) Use the drop-down menus to identify the type of mass movement in each image. Grass covered land with a large depressed area. Muddy water is rushing across a roadway.Dirt and fallen trees cover a roadway. Can someone help me please What happens to mRNA after processing is complete? Professor Plum is standing 10 feet from a streetlamp. The light from the lamp is making hisshadow 8 feet long. He estimates that the angle of elevation from the tip of his shadow to thetop of the streetlamp is 40. About how high is the streetlamp? (6 points) PLEASE 30 POINTSHow is a newborn baby protected from diseases for the first few months of his or her life? With milk sales sagging of late, The Milk Processor Education Program (MPEP) decided to move on from the famous "Got Milk" ad slogan in favor of a new one, "Milk Life." The new tagline emphasizes milk's nutritional benefits, including its protein content. MPEP began collecting data on the number of gallons of milk households consumed weekly (in millions), weekly price per gallon, and weekly expenditures on milk advertising (in hundreds of dollars) for the period following the launch of the new campaign. These data, in forms to estimate both a linear model and log-linear model, are available via the link below. Use these data to perform two regressions; a linear regression and a log-linear regression.Suppose that the weekly price of milk is $3.40 per gallon and MPEP decides to ramp up weekly advertising by 35 percent to $150 (in hundreds). Use the best-fitting regression model to estimate the weekly quantity of milk consumed after this advertising increase. Linear Model Log-Linear ModelQ P A lnQ lnP lnA4.76 2.46 472.68 1.56 0.90 6.160.90 4.28 326.41 -0.10 1.45 5.791.74 3.72 357.36 0.55 1.31 5.880.96 4.20 475.82 -0.04 1.43 6.172.38 4.14 494.25 0.87 1.42 6.201.28 4.59 458.62 0.25 1.52 6.132.86 3.30 421.67 1.05 1.19 6.041.87 4.34 534.85 0.63 1.47 6.282.19 3.31 524.75 0.78 1.20 6.261.38 3.35 370.35 0.32 1.21 5.910.21 4.53 420.16 -1.54 1.51 6.043.55 2.63 333.79 1.27 0.97 5.812.44 4.40 437.32 0.89 1.48 6.081.94 4.36 442.70 0.66 1.47 6.092.50 3.24 375.67 0.91 1.18 5.932.92 3.45 546.36 1.07 1.24 6.304.94 2.97 391.17 1.60 1.09 5.972.14 3.22 498.00 0.76 1.17 6.213.89 3.34 530.17 1.36 1.20 6.276.91 2.24 527.36 1.93 0.81 6.273.41 4.04 440.93 1.23 1.40 6.091.16 4.10 480.35 0.15 1.41 6.171.60 3.99 404.91 0.47 1.38 6.004.09 3.22 512.00 1.41 1.17 6.242.69 2.98 346.29 0.99 1.09 5.852.41 4.30 383.47 0.88 1.46 5.952.25 2.84 434.26 0.81 1.04 6.072.48 3.96 548.37 0.91 1.38 6.313.79 2.49 357.71 1.33 0.91 5.883.33 3.29 445.73 1.20 1.19 6.102.61 4.02 524.55 0.96 1.39 6.262.40 4.05 487.87 0.88 1.40 6.193.92 2.46 343.13 1.37 0.90 5.843.42 3.45 353.81 1.23 1.24 5.870.80 3.40 334.47 -0.23 1.22 5.815.79 2.95 330.57 1.76 1.08 5.803.58 2.69 363.91 1.28 0.99 5.901.58 3.79 383.71 0.46 1.33 5.951.14 3.37 430.37 0.13 1.21 6.061.04 4.64 501.84 0.04 1.54 6.224.88 2.66 447.12 1.59 0.98 6.104.31 2.25 404.38 1.46 0.81 6.002.23 3.94 449.29 0.80 1.37 6.111.38 4.42 327.99 0.32 1.49 5.791.62 3.13 332.39 0.49 1.14 5.811.38 4.45 450.16 0.33 1.49 6.116.20 2.38 467.40 1.82 0.87 6.154.17 3.69 528.60 1.43 1.31 6.274.08 4.02 533.73 1.41 1.39 6.280.08 4.30 355.81 -2.55 1.46 5.873.82 2.80 462.42 1.34 1.03 6.141.17 4.51 549.78 0.16 1.51 6.313.26 2.42 366.63 1.18 0.88 5.902.44 4.37 429.74 0.89 1.47 6.064.16 2.53 399.57 1.42 0.93 5.992.63 3.63 521.95 0.97 1.29 6.264.94 2.80 356.59 1.60 1.03 5.881.84 4.36 416.24 0.61 1.47 6.034.71 3.12 435.99 1.55 1.14 6.086.46 2.40 464.62 1.87 0.87 6.142.79 3.51 353.37 1.03 1.25 5.874.09 3.07 425.12 1.41 1.12 6.054.76 2.32 481.72 1.56 0.84 6.183.05 3.45 376.30 1.12 1.24 5.930.87 4.44 536.86 -0.13 1.49 6.293.12 2.50 493.52 1.14 0.92 6.201.34 3.11 454.69 0.29 1.13 6.121.93 3.24 487.07 0.66 1.17 6.191.64 2.87 461.69 0.50 1.05 6.134.39 2.97 410.84 1.48 1.09 6.025.76 2.33 480.66 1.75 0.84 6.184.40 2.82 381.62 1.48 1.04 5.946.22 3.14 456.97 1.83 1.14 6.121.10 3.89 461.39 0.09 1.36 6.134.12 2.67 430.43 1.42 0.98 6.065.40 2.73 438.53 1.69 1.01 6.082.75 4.52 336.00 1.01 1.51 5.825.12 2.28 519.90 1.63 0.83 6.253.94 3.25 536.25 1.37 1.18 6.285.69 2.18 439.75 1.74 0.78 6.090.44 4.27 352.57 -0.82 1.45 5.871.89 3.62 397.69 0.64 1.29 5.994.02 3.32 345.17 1.39 1.20 5.843.70 3.43 507.56 1.31 1.23 6.233.26 2.43 330.67 1.18 0.89 5.802.98 2.97 433.20 1.09 1.09 6.072.09 4.32 462.14 0.74 1.46 6.145.68 2.25 515.33 1.74 0.81 6.244.33 2.65 508.14 1.47 0.98 6.234.97 3.63 510.41 1.60 1.29 6.242.89 3.60 343.16 1.06 1.28 5.842.25 3.37 365.82 0.81 1.22 5.900.17 3.77 425.56 -1.79 1.33 6.053.96 2.87 347.36 1.38 1.06 5.854.08 2.97 326.06 1.40 1.09 5.793.49 3.94 527.12 1.25 1.37 6.274.21 4.10 475.28 1.44 1.41 6.162.25 4.09 475.69 0.81 1.41 6.162.40 3.93 536.42 0.88 1.37 6.281.61 4.10 325.89 0.48 1.41 5.79 What is the difference? StartFraction x + 5 Over x + 2 EndFraction minus StartFraction x + 1 Over x squared + 2 x EndFraction StartFraction x squared + 4 x minus 1 Over x (x + 2) EndFraction StartFraction x squared + 4 x + 1 Over x (x + 2) EndFraction StartFraction 4 Over negative 1 (x squared + x minus 2) EndFraction StartFraction x squared + 6 x + 1 Over x (x + 2) EndFraction