Most farm equipment that attaches to a tractor is powered by its own independent motor.
False
True
Answer:
False
Explanation:
its self explanatory. a tracter pulls the equipment, so why power the equipment? the tracter is giving it free energy.
A straight pull contains two raceways. One of the raceways has a trade size of 3
and one has a trade size of 2". The length of the box must be
Make sure next time to complete your question.
MARK BRAINLIEST (RELOAD AND CLICK THE CROWN)
Based on the calculations, the length of the box must be equal to 24 inches.
Given the following data:
Trade size A (larger) = 3 inches.Trade size B = 2 inches.Article 314 of the National Electrical Code (NEC).This article provides the standard requirement and dimensions for the installation and use of all electrical boxes and conduit bodies that are used as pull boxes, outlet, junction, etc.
Straight pull with two raceways.Basically, electrical boxes that contain straight pulls are typically sized based on the largest single raceway which enters the box. Also, you should multiply the trade size of the largest raceway by eight (8) when calculating the minimum length of an electrical box containing straight pull in accordance with Article [314.28(A)(1)] of the National Electrical Code (NEC).
For the minimum length:
[tex]Length = 3 \times 8[/tex]
Length = 24 inches.
Read more on National Electrical Code here: brainly.com/question/10619436
TRUE OR FALSE If the percentage change in price is 10 percent and the percentage change in
quantity demanded is 5 percent, then the elasticity of demand is equal to 2
How many trains have been invented all around the world?
Answer:
14,538 trains in the world.
Explanation:
There could be more in the world because they could make more or there could be less??
Select the correct answer.
Rachel said that her uncle works for an US Air Force squadron that manages the working of the entire GPS network. Which squadron employs
Rachel's uncle?
A. GPSO
B.2SOPS
C. AFSOPS
D.NOAA
What is of fluids at rest?
Options :
Electro pneumatics
Hydraulics
Pneumatics
Hydrostatics
Answer:
D. Hydrostatics
Explanation:
The term hydrostatic is defined as the science of fluids with no motion. In this definition a fluid is a substance that flows continually when a shear stress is applied. A fluid can be liquids or gases.
A fluid at rest can experience shear stresses mainly caused by friction between fluid particles caused by fluid viscosity. Such fluids can not resist this type of stress hence they will move in respond to the shear stress applied.
Which of the following allows team members to visualize a design model from a variety of perspectives?
sketches
dimensions
orthographics
isometrics
Answer: from what i know im pretty sure its isometrics or sketches im certain its sketches but not 100%
Explanation: A sketch is a rapidly executed freehand drawing that is not usually intended as a finished work. A sketch may serve a number of purposes: it might record something that the artist sees, it might record
Answer: Sketches
Explanation:
If you have power steering and you are able to __________, you should have your vehicle checked out by a qualified technician.
Answer: drive
Explanation:
The best word that would fit this sentence is drive. A vehicle owner should know how to drive, and they can get their vehicle checked by a qualified technician. The best word that would fit this sentence is drive. If you have power steering and you are able to drive, you should have your vehicle checked by a qualified technician.
Select the correct answer. Jennifer, a construction manager at a construction firm, has to hire several contractors and subcontractors for a new project. She negotiates and finalizes contracts with the selected contractors and subcontractors. Which responsibility of a construction manager does Jennifer portray? A. project planning B. time management C. contract administration D. quality management
Answer:
C. Contract Administration
Explanation:
I got the answer correct on the quiz
Any help is appreciated <3
Answer:
forwarder
Explanation:
a plane where the top view is projected approximately as how it appears to the observer
Answer:
B) I took the quiz and got it 100% right on the question!!!
Explanation:
write a trigonometry table
Explanation:
Trigonometric table :-
[tex]\begin{gathered}\begin{gathered}\begin{array}{ |c |c|c|c|c|c|} \bf\angle A & \bf{0}^{ \circ} & \bf{30}^{ \circ} & \bf{45}^{ \circ} & \bf{60}^{ \circ} & \bf{90}^{ \circ} \\ \\ \rm sin A & 0 & \dfrac{1}{2}& \dfrac{1}{ \sqrt{2} } & \dfrac{ \sqrt{3} }{2} &1 \\ \\ \rm cos \: A & 1 & \dfrac{ \sqrt{3} }{2}& \dfrac{1}{ \sqrt{2} } & \dfrac{1}{2} &0 \\ \\ \rm tan A & 0 & \dfrac{1}{ \sqrt{3} }& 1 & \sqrt{3} & \rm Not \: De fined \\ \\ \rm cosec A & \rm Not \: De fined & 2& \sqrt{2} & \dfrac{2}{ \sqrt{3} } &1 \\ \\ \rm sec A & 1 & \dfrac{2}{ \sqrt{3} }& \sqrt{2} & 2 & \rm Not \: De fined \\ \\ \rm cot A & \rm Not \: De fined & \sqrt{3} & 1 & \dfrac{1}{ \sqrt{3} } & 0 \end{array}\end{gathered}\end{gathered}[/tex]
Explanation:
[tex]\begin{gathered}\begin{gathered}\begin{gathered}\begin{gathered}\sf Trigonometry\: Table \\ \begin{gathered}\begin{gathered}\begin{gathered}\begin{gathered}\boxed{\boxed{\begin{array}{ |c |c|c|c|c|c|} \bf\angle A & \bf{0}^{ \circ} & \bf{30}^{ \circ} & \bf{45}^{ \circ} & \bf{60}^{ \circ} & \bf{90}^{ \circ} \\ \\ \rm sin A & 0 & \dfrac{1}{2}& \dfrac{1}{ \sqrt{2} } & \dfrac{ \sqrt{3}}{2} &1 \\ \\ \rm cos \: A & 1 & \dfrac{ \sqrt{3} }{2}& \dfrac{1}{ \sqrt{2} } & \dfrac{1}{2} &0 \\ \\ \rm tan A & 0 & \dfrac{1}{ \sqrt{3} }&1 & \sqrt{3} & \rm \infty \\ \\ \rm cosec A & \rm \infty & 2& \sqrt{2} & \dfrac{2}{ \sqrt{3} } &1 \\ \\ \rm sec A & 1 & \dfrac{2}{ \sqrt{3} }& \sqrt{2} & 2 & \rm \infty \\ \\ \rm cot A & \rm \infty & \sqrt{3} & 1 & \dfrac{1}{ \sqrt{3} } & 0\end{array}}}\end{gathered}\end{gathered}\end{gathered} \end{gathered}\end{gathered}\end{gathered}\end{gathered}\end{gathered}[/tex]
Trigonometric table :-
[tex]\begin{gathered}\begin{gathered}\begin{array}{ |c |c|c|c|c|c|} \bf\angle A & \bf{0}^{ \circ} & \bf{30}^{ \circ} & \bf{45}^{ \circ} & \bf{60}^{ \circ} & \bf{90}^{ \circ} \\ \\ \rm sin A & 0 & \dfrac{1}{2}& \dfrac{1}{ \sqrt{2} } & \dfrac{ \sqrt{3} }{2} &1 \\ \\ \rm cos \: A & 1 & \dfrac{ \sqrt{3} }{2}& \dfrac{1}{ \sqrt{2} } & \dfrac{1}{2} &0 \\ \\ \rm tan A & 0 & \dfrac{1}{ \sqrt{3} }& 1 & \sqrt{3} & \rm Not \: De fined \\ \\ \rm cosec A & \rm Not \: De fined & 2& \sqrt{2} & \dfrac{2}{ \sqrt{3} } &1 \\ \\ \rm sec A & 1 & \dfrac{2}{ \sqrt{3} }& \sqrt{2} & 2 & \rm Not \: De fined \\ \\ \rm cot A & \rm Not \: De fined & \sqrt{3} & 1 & \dfrac{1}{ \sqrt{3} } & 0 \end{array}\end{gathered}\end{gathered}[/tex]
. What is the combined thrust if both stages are used to launch the rocket?
Answer:
340 mph
Explanation:
What is the output of the following program fragment. Choose appropriate data-types of variables to match output.
i=7;j=8;k=9;
printf(“%d”,(i+10)%k/j);
Answer:
1
Explanation:
Given :
i=7;j=8;k=9;
printf(“%d”,(i+10)%k/j);
The printf function only displays the result
%d - is used for the display format
However, the actual calculation is in the expression: (i+10)%k/j
Given the variables :
i = 7 ;
j = 8 ;
k = 9 ;
(i + 10) = (7 + 10) = 17
(i + 10) % k = 17 % 9
% = remainder value after division
17 % 9 = (17 / 9) = 1 remainder 8
17 % 9 = 8
Hence,
(i + 10) % k = 8
(i + 10) % k / j
j = 8
8 / 8
= 1
The safest hammers are those with heads that are?
Answer:
Rubber Mallet
Explanation:
It is the most common types of hammers, it has a rubber head that allows a soft bang. They are used on sheet metal, woodworking, and filling. A rubber mallet is soft enough to force it without damaging the plasterboard.
A crawler crane has two tracks each sits on a patch of ground 15 feet long by 2 feet wide what is the area of ground that is in contact with the two tracks?
Answer:
30 sq ft
Explanation:
The area of ground that is in contact with the two tracks will be 60 square feet.
What is the area of the rectangle?Let W be the rectangle's width and L its length.
The area of the rectangle is the multiplication of the two different sides of the rectangle. Then the rectangle's area will be
Area of the rectangle = L × W square units
A crawler crane has two tracks each sitting on a fix of ground 15 feet in length by 2 feet wide.
The area of each sitting on the ground is given as,
A = 15 × 2
A = 30 square feet
The area of ground that is in contact with the two tracks is calculated as,
⇒ 30 + 30
⇒ 60 square feet
The area of ground will be 60 square feet.
More about the area of the rectangle link is given below.
https://brainly.com/question/20693059
#SPJ2
Which option identifies the step represented in the following scenario?
The team requests bids from a vendor to offer alternatives to raw materials that are too expensive for the proposed
price of the tablet.
solve the problem
define the problem
evaluate the problem
communicate the solution
Answer:
Solve the problem
Explanation:
The statement is : The team requests bids from a vendor to offer alternatives to raw materials that are too expensive for the proposed
price of the tablet.
The team wanted vendors to submit bids so that it can choose an alternative to raw materials to replace those that were expensive as compared to previous proposed price of a tablet. This is a process of solving the problem to identify a better solution.
The profile height of the tire sidewall (from bead to tread) is 117 mm.
The height of the rim is 381 mm.
What is the total height of the rim and tire together?
Answer:
498 mm
Explanation:
The height of the tire sidewall is ; 117 mm
The height of the rim of the tire is: 381 mm
Total height of the rim and tire together is : 117 + 381 = 498 mm
Name the four ways in which heat is transferred from a diesel engine
Answer:
hope this helps!
Explanation:
Which of the following is an example of a product concept?
a new idea for a flying car
a convertible jacket/poncho that can transform into a floatation device
O a prototype of a self-propelled flying jetpack
O a new idea for a laptop software program
Answer:
A convertible jacket/poncho that can transform into a floatation device
Explanation:
A product concept normally on the assumption that it will attract customers to select the product due to its better qualities, features and performances.
A product concept is important because it will makes it necessary for a marketer to meet the demands and the wishes of users by delivering the best product.
Give five examples of
monopolies and collusion among sellers and their effects on the market economy.
Answer:
to reduce the amount paid to suppliers. For example, a retailer with great buying power (Walmart, Amazon) can offer very small profit margins to suppliers as they have little alternative.Collusion between existing firms in an industry to exclude new firms from deals to prevent the market from becoming more competitive.Sticking to output quotas and higher prices.Collusive tendering. For example, ‘cover prices’ for competitive tendering in bidding for public construction contracts. This is when a rival firm agrees to set artificially high price to allow the firm of choice to win with a relatively high contract offer.Types of collusionFormal collusion – when firms make formal agreement to stick to high prices. This can involve the creation of a cartel. The most famous cartel is OPEC – an organisation concerned with setting prices for oil.Tacit collusion – where firms make informal agreements or collude without actually speaking to their rivals. This may be to avoid detection by government regulatorsPrice leadership. It is possible firms may try to unofficially collude by following the prices set by a market leader. This enables them to keep prices high, without ever meeting with rival firms. This kind of collusion is hard to prove whether it is unfair competition or just the natural operation of markets.Problems of collusionCollusion is seen as bad for consumers and economic welfare, and therefore collusion is mostly regulated by governments. Collusion can lead to:High prices for consumers. This leads to a decline in consumer surplus and allocative inefficiency (Price pushed up above marginal cost)New firms can be discouraged from entering the market by types of collusion which act as a barrier to entry.Easy profits from collusion can make firms lazy and avoid innovation and efforts to increase productivity.Industry gets the disadvantages of monopoly (higher price) but none of the advantages (e.g. economies of scale)Justification for collusionIn times of unprofitable business conditions, collusion may be a way to try and save the industry and prevent firms from going out of business, which wouldn’t be in the long-term consumer interest. Dairy suppliers tried to use this justification in 2002/03 after problems from foot and mouth disease led to a decline in farm incomes.Research and development. Profits from collusion could, in theory, be used to invest in research and development.Milk price by supermarkets 2002-03After a period of low milk, butter and cheese
Answer the following questions:
How does the process of system engineering allow for the development of a well-integrated structure?
How does the integration of system engineering early in the design process provide benefits to the overall design?
Select the correct answer. Which if the following statements is an example of a good problem statement? to design a pair of running shoes for women B. to design a pair of shoes OC. to design footwear OD to design a white pair of running shoes with laces and one inch sole for
Answer:
To design a pair of running shoes for women.
Explanation:
A good problem statement will led a reader from a shared context to understanding of a problem and on to a proposed solution.
The elements of a good problem statement are ;
It should be addressing a gap in an ideaIt should be vital enough to contribute to an existing body of researchIt should offer room for further researchIt should give itself to investigation through data collection.The
converts the motion of the brake pedal into hydraulic
pressure.
Select the correct answer.
A Brake baduter
B. Slave cylinder
C. Master cylinder
D. Brake fluid
Answer:
c ithink
Explanation:
Which of the following identifies one factor that causes conventional tillage to actually be good for the environment?
Farmers who use conventional tillage use compost more than other farmers.
Farmers who use conventional tillage use fewer chemicals for weed control.
Farmers who use conventional tillage use less environment-harming machinery.
Farmers who use conventional tillage require less freshwater for plant irrigation.
Answer:
Farmers who use conventional tillage use compost more than other farmers.
Explanation:
Convectional tillage is good to the environment because it attains the following;
It increases porosity of the soilIt loosens the soil thus allowing proper root growth and air exchangeIt is an effective way to incorporate manure and break sod fieldsTilled soils warm faster in springHELP ASAP WILL GIVE BRAINLIEST
Which of the following is a moving inclined plane?
lever
wedge
wheel and axel
pulley
Answer:
A moving inclined plane is called a wedge.
Pitch stability occurs around an airplane's______.
Answer:
horizontal stabilizers also located in the tail of the airplane
Explanation:
Hello! Can you help me pass this class.
Answer:
sliding T bevel not sure though
Explanation:
100 POINTS!!!! PLZZ HELPPP 3. A jar made of 3/16 inch thick glass has an inside radius of 3.00 inches and total height of 6.00 inches (including the bottom thickness of glass). The glass has a density of 165 lb/ft3. The jar is placed in water with a density of 62.5 lb/ft3.
a. Assume the jar sits upright in the water without tipping over. How far will the empty jar sink into the water?
i. What is the volume of the glass shell of the jar? Precision 0.00
ii. What is the weight of the jar? Precision 0.00
iii. What is the weight of water the empty jar will displace? Precision 0.00
iv. What is the volume of water the empty jar will displace? Precision 0.00
v. How far will the empty jar sink?
Answer:
its only 50 points
Explanation:
Which of the following devices would you expect to consume the most energy for each hour that it operates?
then options are
A portable tape recorder
An electric space heater
desk lamp
An electric can opener