Therefore option C is the correct option.
The gravitational force that binds the atom's constituent particles together is known as intermolecular force. The force that unites the many parts when they combine is the one that is being discussed in the inquiry.
Ion-dipole forces, hydrogen bonds between molecules, dipole-dipole forces, and van der Waals forces are the intermolecular forces listed in the answer choices in order of strength to weakness. The strongest intermolecular attraction is between dipoles. They exist between all types of molecules, whether ionic or covalent, polar or non-polar, and are the weakest intermolecular forces.
Compared to liquids and gases, solids typically exhibit the highest intermolecular forces. Because the particles are packed closely together, solids are incompressible and dense. The London dispersion force is the least powerful intermolecular force.
Dispersion Force of London Because it is a transient attractive force that causes a transient dipole, the London dispersion force is also known as the induced dipole. Nonpolar monatomic gases can exhibit London dispersion.
For such more question on intermolecular force,
https://brainly.com/question/13588164
#SPJ4
which of these substances are compounds? i. neon ii. crude oil iii. water iv. sodium chloride
The substances that are compound are the correct option is : iii. water iv. sodium chloride.
The compounds are the substance formed by combining the two or more chemical elements together. The compounds are the substances that is homogeneous in the mixture. The bonding in the substances that are compound is the covalent bonding or the ionic bonding.
The water is compound and the bonding present in the water is type of covalent bonding. The sodium chloride, NaCl is also a compound and the type of bonding present is the ionic bonding.
Thus, the sodium chloride and the water are the compounds.
To learn more about compound here
https://brainly.com/question/5169457
#SPJ4
How does the presence of kelp influence water oxygen levels?
how to calculate mass percentage for isoborneol to camphor
Camphor at 152.23 g/mol and isoborneol at 154.25 g/mol 0.1 g of camphor with a mole ratio of 1:1 Moles of camphor: 0.1g/152.23g/mol is equal to 0.000657 moles. Isoborneol has a molecular weight of 0.000657*154.25 g/mol.
It was discovered that this reaction has a very high percent yield of 80%. However, we had anticipated that in the methanol solvent, sodium borohydride would attack camphor from the side that was less sterically hindered, mostly producing isoborneol. Camphor at 152.23 g/mol and isoborneol at 154.25 g/mol 0.1 g of camphor with a mole ratio of 1:1 Moles of camphor: 0.1g/152.23g/mol is equal to 0.000657 moles. Isoborneol has a molecular weight of 0.000657*154.25 g/mol. It is 0.101 g in theory. Impure materials calculation: A gram of camphor weighs 0.12. Weight: 41.961 pounds for a 50 ML flask.
Learn more about isoborneol from here:
https://brainly.com/question/24261535
#SPJ4
Why is sodium important to life?
Answer: The human body requires a small amount of sodium to conduct nerve impulses, contract and relax muscles, and maintain the proper balance of water and minerals.
Explanation:
Sodium is important because it is an essential mineral for humans and other animals, as it plays a key role in maintaining healthy fluid balance, nerve and muscle function, and blood pressure regulation.
What is mineral?A mineral is a naturally occurring, inorganic solid that has a definite chemical composition and a specific crystal structure. Minerals are the building blocks of rocks and the foundation of the Earth’s crust. They are found in soil, rocks, and bodies of water. Minerals have many uses, from industrial applications to making up the components of jewelry, coins, and other decorative pieces. They also have a wide range of physical and chemical properties. The most common minerals are quartz, calcite, feldspar, mica, and olivine. Minerals can be identified by their color, crystal shape, luster, hardness, and streak.
To learn more about mineral
https://brainly.com/question/89259
#spj4
which best defines what a mole represents in chemistry?
A mole is defined as 6.02214076 × 1023 of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
The mole, symbol mol, is the unit of amount of substance in the International System of Units (SI). The quantity amount of substance is a measure of how many elementary entities of a given substance are in an object or sample. The mole is defined as containing exactly 6.02214076×1023 elementary entities.
The name has nothing to do with the animal whatsoever. German chemist Wilhelm Ostwald generally gets the credit for introducing the word. Ultimately, though, the word mole comes not from German but from the Latin word moles, which means “a mass” .
Learn more about mole
https://brainly.com/question/20486415
#SPJ4
if -ra = -(dc,ldt) = 0.2 mol/liter.sec when ca = 1 mollliter, what is the rate of reaction when ca = 10 mollliter? note: the order of reaction is not known.
if -ra = -(dc,ldt) = 0.2 mol/liter.sec when ca = 1 mollliter, 2 mol/l.s is the rate of reaction when ca = 10 mollliter.
What is rate of reaction ?The reaction rate or rate of reaction is the rate at which a chemical reaction occurs, defined as proportional to the increase in product concentration per unit time and the decrease in reactant concentration per unit time.
This information is required for the large-scale production of many chemicals, such as fertilizers, drugs, and household cleaning products.
Given:
-ra = -(dc,ldt) = 0.2 mol/liter
ca = 10 mollliter
Now, -ra = kCa
=0.2 × 10
= 2 mol/l.s
Thus, 2 mol/l.s is the rate of reaction when ca = 10 mollliter.
To learn more about the rate of reaction, follow the link;
https://brainly.com/question/8592296
#SPJ1
If you were to complete a mass balance on a coffee roaster, which of these would NOT be a material stream exiting out of the roaster?Group of answer choicesWater vapor, carbon dioxide, and other VOCsChaffSpent coffee groundsRoasted coffee beans
The "spent coffee grounds" would not be considered a material stream exiting out of the roaster. Thus, option C holds the truth.
Spent coffee grounds are not a material stream exiting the roaster because they are the residual product of the roasting process and are considered waste. They are removed from the roaster after the roasting process is complete and are typically disposed of.
The other three options listed (water vapor, carbon dioxide, and other VOCs, chaff, and roasted coffee beans) are all materials that are released from or removed from the roaster during the roasting process. Water vapor, carbon dioxide, and other VOCs are gaseous byproducts of the roasting process that are released into the atmosphere. Chaff is the dry outer layer of the coffee cherry that is separated from the bean during the roasting process and can be reused as a fuel source or as fertilizer.
Roasted coffee beans are the end product of the roasting process and are packaged and sold as a finished product.
Learn more about coffee roaster here: brainly.com/question/16012110
#SPJ4
What is the major organic product obtained from the following reaction?Br2 H20 Br Br OH Br OH OH Br
a. 1
b. 3
c. 4
d. 2
The major organic product obtained from the following reaction 2.
What is the organic ?Organic refers to the use of natural, sustainable farming practices and the avoidance of synthetic inputs such as pesticides, antibiotics, and hormones. Organic production is designed to support the health of soil, ecosystems, and people. Organic farmers use methods such as crop rotation, green manure, and composting to maintain soil fertility, control pests, and reduce pollution. Organic food is produced without the use of chemical fertilizers, pesticides, or other synthetic inputs. Organic food is generally higher in nutrients and lower in contaminants than conventionally-grown food.
To learn more about organic
https://brainly.com/question/26447562
#SPJ4
Heat i removed from a 1. 6-microgram ample of liquid in a ealed container. The liquid tranform into a olid. After the tate change, what i the ma of the olid?
The mass of the solid after the state change would still be 1.6 micrograms. Mass is a measure of the amount of matter in an object, and it remains constant during a phase change (such as from a liquid to a solid) as long as no matter is added or removed from the system.
About MicrogramsIn the metric system, a microgram is a unit of mass equal to one million grams. The unit symbol is μg according to the International System of Units; the recommendation symbol in the United States and United Kingdom when conveying medical information is mcg.
Formula Micrograms :
1 kilogram
1 * 10^3 gram
1 microgram
1 * 10^-3 gram
1 kilogram / 1 microgram
10^3 / 10^-3
10^6
Learn More about Microgram at brainly.com/question/30460423
#SPJ4
which of the following structures have carbon with sp2 hybridization state
In the compound C2H4, the carbon atoms are in Sp² hybridized state.
In chemistry, hybridization refers to the mixing of atomic orbitals to form new hybrid orbitals with different energy levels and geometric shapes. The most common types of hybridization are sp³, sp², and sp. The type of hybridization that occurs in a molecule depends on the arrangement of its atoms and their electron configurations. In the case of C2H4 (ethylene), the carbon atoms are bonded to each other and to hydrogen atoms in a planar arrangement. This requires the carbon atoms to be in sp² hybridization, where the 2s orbital and two of the 2p orbitals mix to form three equivalent sp² hybrid orbitals. These sp² hybrid orbitals are then used to form sigma bonds with the other atoms in the molecule. This type of hybridization results in a flat, trigonal planar arrangement of atoms in the molecule.
Learn more about carbon here: brainly.com/question/22530423
#SPJ4
Complete question:
In which of the following compounds, carbon atoms are in Sp² hybridized state?
A C3H8
B C2H2
C C2H4
D CH4
determine which amino acids are present in the peptide.
The peptide's shorthand name, Ala-Gly-Ser, stands for Alanine, Glycine, and Serine.
Evaluate the amino acids given in the peptide?Each amino acid is distinguished from the others by a R side chain, a -carboxyl group, and a -amino group.
Peptide bonds—substituted amide connections that hold amino acid chains together covalently—are what give these strands of amino acids their shape. With the absence of a water molecule, the reaction here between amino group from one amino acid as well as the carboxyl group of second amino acid takes place.
Three amino acids are bound together into peptide bonds to form a tripeptide.
The first residue of the peptide in question has a side chain methyl group. The second residue has a side chain of hydrogen atoms. A side chain with a hydroxymethyl group can be found in the third residue.
Alanine is the amino acid with a side chain containing a methyl group (Ala).Glycine, or Gly, is just the amino acid that comprises a side chain containing a hydrogen atom.Serine, abbreviated Ser, is the amino acid that has a side chain with a hydroxymethyl group.As a result, the peptide's shorthand name is Ala-Gly-Ser and it is made up of the amino acids Alanine, Glycine, and Serine.
To know more about the amino acids, here
https://brainly.com/question/3535479
#SPJ4
the complete question is-
Peptide with three amino acid residues. The first residue contains a methyl group side chain. The second residue contains a hydrogen atom side chain. The third residue contains a hydroxymethyl group side chain. The amino group of the first side chain binds to the unshown remainder of the peptide. The carboxyl group of the third side chain binds to the unshown remainder of the peptide. Determine which amino acids are present in the peptide.
Consider atoms of the following elements. Assume that the atoms are in the ground state. The atom that contains exactly two unpaired electrons
The atom with the highest occupied energy sublevel and one electron is (B) calcium (Ca).
As a metal with the electron configuration [Ar] 4s1, calcium has one electron in the 4s orbital, the energy sublevel with the highest occupancy. The 4s orbital, which is at the highest energy level, has a capacity of two electrons. One electron occupies the 4s orbital in the case of calcium, making it the element with the fewest electrons in the highest occupied energy sublevel.
The outermost electron configuration of gallium, which belongs to group thirteen, is ns2 np1. The circumstance required by the question is the highest occupied sub-level, np1, which has just one electron.
Learn more about electron configuration:
brainly.com/question/29757010
#SPJ4
Consider atoms of the following elements. Assume that the atoms are in the ground state. The atom that contains only one electron in the highest occupied energy sublevel
(A) S
(B) Ca
(C) Ga
(D) Sb
(E) Br2.
all atoms in an element have the same number of protons. T/F
Yes, atoms of the same element contain the same number of protons.
The reason for this is that the number of protons in the nucleus is the atomic number of the element. Due to the uniqueness of the atomic number, it is considered a way to identify elements For example, hydrogen has one proton in its nucleus.
Do all the atoms of an element have the same number of protons?
The number of protons in an atom is called its atomic number (Z). This number is very important because it is unique for atoms of a given element. All atoms of an element have the same number of protons, and every element has a different number of protons in its atoms.
Are all atoms the same in an element?
No. Two atoms of the same chemical element are typically not identical. First of all, there is a range of possible states that the electrons of an atom can occupy. Two atoms of the same element can be different if their electrons are in different states
How many protons are in every atom?
The number of protons in an atom is equal to the atomic number of the element. For example, let's use oxygen. According to the periodic table, oxygen has the atomic number eight.
To know more about isotopes:
https://brainly.com/question/24720481
#SPJ4
consider what would happen if you did not let the temperature of the flask reach equilibrium with the temperature of the water bath for the air vapor pressure measurement.
a. How would this affect Pvapor for the first pressure temperature data pair recorded?
b. How would this affect the slope of the line for the lnPvapor vs 1/T plot?
c. How would this affect your calculation of ΔHvap?
When measuring the vapour pressure of a chemical, it is critical to ensure that the temperature of the flask containing the substance has reached equilibrium with the temperature of the water bath in which it is put. If this is not done, the experiment's results may be influenced in a number of ways.
a. Effect on Pvapor: If the temperature of the flask has not reached equilibrium with the water bath, the initial pressure temperature data pair collected will not accurately reflect the vapour pressure of the substance at that temperature. This is because the temperature of the substance will still be changing and will not have stabilised at the temperature of the water bath. As a result, the measured vapour pressure will be higher or lower than if the flask temperature had reached equilibrium with the water bath.
b. Effect on the slope of the line: The slope of the line in a plot of lnPvapor vs 1/T is directly connected to the enthalpy of vaporisation of the material (Hvap). The slope of the line will be inaccurate if the temperature of the flask has not reached equilibrium with the water bath. This is due to the fact that the substance's temperature will continue to change, and the recorded vapour pressure will not precisely reflect the vapour pressure of the substance at that temperature.
c. Effect on Hvap calculation: A substance's enthalpy of vaporisation is proportional to the slope of the line in a plot of lnPvapor vs 1/T. If the temperature of the flask has not reached equilibrium with the water bath, the slope of the line will be inaccurate, as will the computed Hvap.
To summarise, it is critical to enable the temperature of the flask to approach equilibrium with the water bath in order to obtain correct findings when measuring a substance's vapour pressure. To avoid inaccuracies in the recorded vapour pressure, the slope of the line in a plot of lnPvapor vs 1/T, and the predicted Hvap, equilibrium must be reached.
For more such questions equilibrium.
https://brainly.com/question/28527601#
#SPJ11
which of the following is a hydrophobic material? a. paper b. table salt c. wax d. sugar e. pasta
Answer:
Wax
Explanation:
Hydrophobic materials don't desolve in water, wax is a waterproof material and won't desolve causing it to be a hydrophobic material.
Wax is a hydrophobic material as it doesn't dissolve in water. Literally, "the fear of water" is "hydrophobic." Water is repelled by hydrophobic molecules and surfaces.
Oil and other hydrophobic liquids will separate from water. The atoms that make up hydrophobic compounds are often nonpolar, which means they don't generate a static electric field. These opposing areas of electrical energy attract water molecules in polar molecules. Water cannot form hydrogen bonds with molecules unless the molecules have opposing electrical charges. The nonpolar molecules congregate as a result of the water molecules forming more hydrogen bonds with one another. The clustering of nonpolar molecules produces the hydrophobic effect. Large macromolecules may have hydrophobic regions that cause the molecules to fold together and move away from water.
To know more about hydrophobic visit
https://brainly.com/question/30074618
#SPJ4
Which compound will have the highest boiling point?A.CH4B.CH3OHC.C2H5OHD.HCHO
The compound which will have the highest boiling point is the correct option is C. CH₂H₅OH.
The one compound which contains the higher attraction of the intermolecular forces will have the higher boiling point. The greater the attraction, The more energy will be required to break the bonds and therefore, the higher will be the boiling point.
The methanol and the ethanol contains the hydrogen bonding . The ethanol contains the more number of the carbon atom as compared to the methanol.
Thus, CH₂H₅OH that is ethanol have the highest boiling point.
To learn more about boiling point here
https://brainly.com/question/29118192
#SPJ4
The reactivity of an element is based on its __________.
Responses
A electronselectrons
B protons
Answer:
The answer is A
Explanation:
The reactivity of an element is based on the electrons in its outer shell
how long does it take for a plastic bag to decompose
It can take hundreds of years for a plastic bag to decompose.
Plastic bags are made from synthetic polymers, which are materials that do not biodegrade easily. In the environment, plastic bags can break down into smaller and smaller pieces, but they never completely disappear. In ideal conditions, a plastic bag can take anywhere from 10 to 1000 years to decompose, but the exact amount of time depends on a number of factors such as the type of plastic, exposure to sunlight and heat, and presence of other decomposers like bacteria and fungi.
Because plastic bags do not decompose quickly, they can persist in the environment for a long time and cause problems for wildlife, ecosystems, and human health. For this reason, many communities have implemented plastic bag reduction and recycling programs to help reduce their impact on the environment.
You can learn more about decomposition of plastic at
https://brainly.com/question/20593740
#SPJ4
One of their hypotheses was that Fus3 kinase is required for the signal transduction pathway leading to shmoo formation. If this hypothesis is correct, what result should be observed in the ΔFus3 strain?
There is no formation of shmoos , If the hypothesis that says "Fus3 kinase is required for the signal transduction pathway leading shmoo formation" is correct, then a strain with a deletion Fus3, is not going to render Fus3 kinase, at least active.
By this reason, there will not be shmoo formation The Fus3 strain should not generate shmoos, and the cells' walls should not contain a red zone.
A protein kinase is an enzyme that transfers a phosphate group from ATP to a protein, activating it (often a second type of protein kinase).
Learn more about "Fus3 kinase
https://brainly.com/question/14525662
#SPJ4
Do you think Sam Shepard was guilty? Explain your reasoning.
I believe that Sam Sheppard is guilty because of the amount of evidence against him
Who is Sam Sheppard?Sam Sheppard was an American physician who was convicted and later acquitted for the murder of his wife, Marilyn Reese Sheppard, in 1954. The case was widely covered by the media and has been the subject of numerous books and movies.
The verdict of the case was a subject of much controversy and legal debate, with some people believing that Sheppard was guilty and others believing that he was wrongly convicted.
Read more about Sam Sheppard here:
https://brainly.com/question/29461072
#SPJ1
FILL IN THE BLANK. a hydrogen bond can form between the partially negative___ atom of one water molecule and the partially positive___ atom of another water molecule.
A hydrogen bond can form between the partially negative oxygen atom of one water molecule and the partially positive hydrogen atom of another water molecule.
Hydrogen bonding is a type of noncovalent bond that occurs between a hydrogen atom and a highly electronegative atom, such as nitrogen, oxygen, or fluorine. In water molecules, hydrogen bonding occurs between the partially negative oxygen atom of one molecule and the partially positive hydrogen atom of another molecule.
A hydrogen bond is stronger than a van der Waals interaction, but weaker than a covalent bond. The strength of hydrogen bonding in water is responsible for many of its unique properties, such as its high boiling point, high surface tension, and low vapor pressure. Hydrogen bonding also plays an important role in the stability of many biological molecules, such as proteins and nucleic acids.
In water, hydrogen bonds form a network of bonds between neighboring molecules, giving the molecule a highly ordered structure. This network of hydrogen bonds makes water a highly cohesive substance, which is important for many biological processes, such as the transport of nutrients and waste in plants and animals.
Learn more about hydrogen bonding here:
https://brainly.com/question/17659933
#SPJ4
What is the monomer of a lipid and the name of a molecule?
Fatty acids and glycerol are referred to as the monomers of lipids.
What does a lipid molecule look like?
Triacylglycerols, often known as triglycerides (TGs), are naturally occurring lipid molecules in our bodies that are composed of one glycerol molecule connected to three molecules of fatty acids (saturated/unsaturated or both) via ester bonds.
Where are the lipid monomers?
Monomer units theoretically do not exist in lipids. They are neither macromolecules nor polymers. Lipids will differ in their structural makeup. For instance, triglycerides are composed of one glycerol molecule and three tails of fatty acids.
To know more about glycerol visit:
https://brainly.com/question/14962130
#SPJ4
what is the difference between controlled and uncontrolled redundancy
The difference between controlled and uncontrolled redundancy is with controlled redundancy, methods will be used to combine the data that is input automatically.
Redundancy refers to the duplicacy of data in the same database.
Controlled Redundancy: It will refers to sorting the redundancy as soon as the input is given.
Although the maximum platforms do not support controlled redundancy.
Redundancy will be controlled when the DBMS ensures that multiple copies of the same data are consistent. – For example, if new record with Student Number=10 is stored in the database, the DBMS will ensure that this stored in the database, the DBMS will ensure that this record is for Student jeorge.
Un-Controlled redundancy: It is an inconsistent state which cannot be controlled or sorted.
It is the most common occurring as well as realistic situation.
To know more about redundancy here
https://brainly.com/question/12972964
#SPJ4
A sample of a gas occupies 250 mL at 1.00 atm of pressure. If the pressure increases to 2.00 atm while the temperature stays the same, what is the new volume?
At 1.00 atm of pressure, a sample of a gas takes up 250 mL. The new volume will be 125 mL if the temperature remains constant and the pressure rises to 2.00 atm.
According to Boyle's law, a gas's volume changes inversely with pressure when the temperature is held constant.
The flowing gas molecules are spaced from one another at a specific distance. The volume decreases as the pressure rises because the molecules are forced closer together. Gases are liberated to travel in a bigger volume when the pressure is reduced.
Boyle's law can be mathematically represented using the following equation:
P × V = k, where k is constant.
To compare how a gas's conditions are changing, utilise Boyle's Law. If P₁ and V₁ are the beginning pressure and volume, respectively, and P₂ and V₂, respectively, are the ultimate pressure and volume, then Boyle's Law can be expressed mathematically as follows:
P₁ V₁ = P₂ V₂
Here, P₁ = 1 atm, V₁ = 250 mL, P₂ = 2 atm, V₂ = ?
Putting these values in the above equation,
1 × 250 = 2 × V₂
or, 2 V₂ = 250
or, V₂ = 125 mL.
Hence, the new volume is 125 mL.
To know more about Boyle's law from the link
brainly.com/question/1696010
#SPJ4
Which nucleophilic reagent, Z, will give the most 1,4-addition product with methyl vinyl ketone? O NaCN (C6H5)3P=CH2 ОснЗМgBr OLIAIH4
The most favorable nucleophile for 1,4-addition with methyl vinyl ketone is sodium cyanide (NaCN).
Sodium cyanide (NaCN) is a highly reactive and strong nucleophile, capable of reacting with methyl vinyl ketone through a 1,4-addition reaction. This reaction is favored by the highly electrophilic carbonyl group in methyl vinyl ketone, which attracts nucleophiles to add to the carbonyl carbon.The reaction of NaCN with methyl vinyl ketone proceeds through nucleophilic attack by the cyanide ion on the carbonyl carbon, leading to formation of a tetrahedral intermediate. .Compared to other nucleophiles listed such as ZnBr2, LiAlH4, and (C6H5)3P=CH2, NaCN is a stronger nucleophile and is therefore more favorable for 1,4-addition with methyl vinyl ketone. Additionally, the reaction with NaCN is typically faster and more efficient compared to other nucleophiles. the 1,4-addition of NaCN to methyl vinyl ketone results in the formation of a product with the negative charge located on the carbon alpha to the carbonyl group, as opposed to the carbonyl carbon itself.
learn more about nucleophile here:
https://brainly.com/question/14052597
#SPJ4
a weak acid is 33 issociated at ph 5.0. what is the pka for this acid?
The pKa of a weak acid that is 33% dissociated at pH 5.0 is approximately 4.83.
A weak acid is defined as an acid that only partially dissociates in water to produce ions. The extent to which a weak acid dissociates is dependent on its acid dissociation constant (Ka) and the pH of the solution.
The pH of a solution is a measure of its hydrogen ion (H+) concentration, with lower pH values indicating higher H+ concentrations and vice versa.
The pKa of a weak acid is defined as the pH at which the concentration of the dissociated form of the acid is equal to the concentration of the undissociated form.
At the pKa of a weak acid, the concentration of the dissociated form and the undissociated form are equal, meaning that 50% of the weak acid has dissociated into ions. If we know the extent of dissociation at a particular pH, we can calculate the pKa using the equation:
pKa = -log10(Ka) = -log10([H+]/[HA])
where [H+] is the hydrogen ion concentration, [HA] is the concentration of the undissociated form of the acid, and Ka is the acid dissociation constant.
In this case, the weak acid is 33% dissociated at pH 5.0, meaning that [H+]/[HA] = 0.33. We can use this information to calculate the pKa:
pKa = -log10(0.33) = log10(1/0.33)
pKa = 0.52 + log10(3)
pKa = 0.52 + 0.48
pKa = 1.0
So, the pKa for the weak acid is approximately 4.83.
To know more about pKa here:
https://brainly.com/question/15074297#
#SPJ11
(lab 13 graphing)
1. according to your graph, what is the relationship between pressure and volume?
2. on your graph, what is the volume of the gas at a pressure of 760 mm Hg?
The relationship between pressure and volume is inversely proportional.
In Boyle's Law the volume of a gas is inversely proportional to its pressure. In this graph, the volume and pressure are proportional to each other.
What is pressure and volume ?A contained gas will experience an increase in pressure when its volume is reduced, and a drop in pressure when its volume is increased. In reality, the pressure reduces by the same factor when the volume increases by a particular amount, and vice versa.
The balloon is inflated with air, which presses against the rubber and causes the balloon to expand. The un-squeezed portion of the balloon will expand outward if one end of the balloon is squeezed, reducing the volume and increasing the pressure inside.
Learn more about Pressure and volume here:
https://brainly.com/question/25736513
#SPJ4
The average atomic mass of an element is 39.95 amu. What is the identity of the element? 1. Potassium 2. Yttrium 3. Argon 4. Calcium Enter the answer choice number.
Answer:
3. Argon
Explanation:
The average atomic mass of an element with a value of 39.95 amu is Argon (Ar). The answer choice number is 3.
Suppose you mix two clear liquids together to form a new substance and bubbles form. What type of reaction might this indicate? Explain your answer.
Answer: This indicates a chemical reaction.
Explanation: The bubbles formed are a sign that a gas has formed.
a buffer is a solution that neutralizes ph. to buffer a solution with a ph 3, what would you add to neutralize?
To buffer a solution with a pH of 3, you would need to add a base to neutralize it.
A buffer solution is one that resists changes in pH when small amounts of acid or base are added. To buffer a solution with a pH of 3, you would need to add a base such as sodium hydroxide (NaOH) or potassium hydroxide (KOH). The amount of base added will depend on the amount of acid present in the solution.
As a general rule, for every mole of acid, you should add about 0.5 mole of base. Adding too much base will result in the solution having a pH higher than 7, which is not desirable. Therefore, it is important to carefully monitor the amount of base added to ensure the pH remains neutral.
Once the desired pH is achieved, the solution should be thoroughly mixed and tested to ensure the pH is stable.
Read more about Buffer solution:
https://brainly.com/question/8676275
#SPJ4