Question pic
(Will make brainliest)

In the third step, a curved arrow shows the deprotonation of the amine to form an enamine. The nitrogen in the enamine donates a pair of non-bonding electrons to form a new carbon-carbon double bond. Finally, a curved arrow shows the elimination of the protonated amine, resulting in the formation of the final product, an enamine.

Enamine reactions involve the formation of a carbon-carbon double bond through the addition of an amine to a carbonyl compound. The mechanism of this reaction begins with the protonation of the carbonyl oxygen by a strong acid such as HCl. This results in the formation of a carbocation intermediate, which then reacts with the amine to form an iminium ion.
Next, the iminium ion undergoes nucleophilic attack by the enamine, which is formed by the deprotonation of the amine. The nucleophilic attack results in the formation of a new carbon-carbon double bond and the elimination of the protonated amine. The final product is an enamine.
To illustrate the mechanism of this reaction, curved arrows are used to show the movement of electrons. In the first step, a curved arrow shows the protonation of the carbonyl oxygen, which results in the formation of a carbocation intermediate. The positive charge on the carbocation is indicated by a plus sign.
Next, a curved arrow shows the attack of the amine on the carbocation, resulting in the formation of an iminium ion. The nitrogen in the amine donates a pair of non-bonding electrons to form a new carbon-nitrogen bond.
Overall, the mechanism of the enamine reaction involves multiple steps and the use of curved arrows to show the movement of electrons and the formation of new bonds.

to know more about Enamine reactions visit:

brainly.com/question/31550454

#SPJ11

The method of determining a partition coefficient is not particularly accurate due to potential sources of error such as incomplete extraction, inaccurate measurements, and contamination. To confirm the missing mass dissolved in the aqueous layer, you could use analytical techniques like chromatography or spectroscopy.

Some potential sources of error in determining a partition coefficient include incomplete extraction, which occurs when the solute does not completely distribute between the two immiscible phases. Inaccurate measurements of volumes or masses can also lead to errors in the calculated partition coefficient. Additionally, contamination from impurities in the solvents or from the environment may cause inaccuracies in the obtained results.

To confirm the missing mass dissolved in the aqueous layer, you can employ analytical techniques such as chromatography (e.g., high-performance liquid chromatography or gas chromatography) or spectroscopy (e.g., ultraviolet-visible, infrared, or nuclear magnetic resonance spectroscopy). These methods allow you to identify and quantify the dissolved solute in both the organic and aqueous phases, ensuring a more accurate partition coefficient calculation. By comparing the results from these techniques with the initial partition coefficient, you can better understand and address the potential sources of error.

Know more about Chromatography here:

https://brainly.com/question/31857177

#SPJ11

(a) 1 mol of SO2(g) at STP has greater entropy than 1 mol of H2(g) at STP. (b) 1 mol of N2O4(g) at STP has greater entropy than 2 mol of NO2(g) at STP.

(a) The system with greater entropy between 1 mol of H2(g) and 1 mol of SO2(g) at STP can be determined by considering their molecular masses and the number of moles.

At STP, 1 mol of H2(g) occupies a volume of 22.4 L and has a molecular mass of 2 g/mol. Similarly, 1 mol of SO2(g) occupies a volume of 22.4 L and has a molecular mass of 64 g/mol.

The entropy of a system is directly proportional to the number of particles present in it, so the system with greater entropy will have more particles. As 1 mole of SO2(g) has more particles than 1 mole of H2(g), it will have a greater entropy.

Therefore, the system with greater entropy between 1 mol of H2(g) and 1 mol of SO2(g) at STP is 1 mol of SO2(g).

(b) The system with greater entropy between 1 mol of N2O4(g) and 2 mol of NO2(g) at STP can be determined by considering the degree of molecular complexity.

At STP, 1 mol of N2O4(g) occupies a volume of 22.4 L and has a molecular mass of 92 g/mol. On the other hand, 2 mol of NO2(g) occupy a volume of 44.8 L and have a molecular mass of 46 g/mol.

The entropy of a system is directly proportional to the degree of molecular complexity. As N2O4(g) is a larger and more complex molecule than NO2(g), it will have more entropy.

Therefore, the system with greater entropy between 1 mol of N2O4(g) and 2 mol of NO2(g) at STP is 1 mol of N2O4(g).

For more question on entropy visit:

https://brainly.com/question/30481619

#SPJ11

The minimum number of grams of sodium hydroxide required to saponify 579 g of trimyristin is 96.0 g.

To calculate the minimum number of grams of sodium hydroxide (NaOH) needed to saponify 579 g of trimyristin, you must use stoichiometry.

Trimyristin (C₄5H₈6O₆) undergoes saponification with 3 moles of NaOH to produce 3 moles of sodium myristate and 1 mole of glycerol.

First, determine the molar mass of trimyristin (C₄5H₈6O₆) :

45(12.01) + 86(1.01) + 6(16.00) = 723.5 g/mol.

Next, calculate the moles of trimyristin: 579 g / 723.5 g/mol = 0.800 mol.

Since 3 moles of NaOH are required to saponify 1 mole of trimyristin, you need 3 * 0.800 mol = 2.400 mol of NaOH.

Finally, convert moles of NaOH to grams:

2.400 mol * 40.00 g/mol (molar mass of NaOH) = 96.0 g.

Learn more about NaOH at

https://brainly.com/question/18124655

#SPJ11

When 35 mL of 0.92 M sulfuric acid reacts with excess aluminum, approximately 0.823 L of hydrogen gas is formed at 23 °C and a pressure of 745 mm Hg.

To determine the volume of hydrogen gas formed, we need to use the ideal gas law equation:

PV = nRT

Where:

P = pressure of the gas (in atm)

V = volume of the gas (in liters)

n = number of moles of gas

R = ideal gas constant (0.0821 L·atm/(mol·K))

T = temperature (in Kelvin)

Convert the given pressure to atm:

745 mm Hg * (1 atm / 760 mm Hg) = 0.9797 atm

Convert the given volume to liters:

35 mL * (1 L / 1000 mL) = 0.035 L

Calculate the number of moles of hydrogen gas produced.

From the balanced equation:

2 Al + 3 H₂SO₄ → Al₂(SO₄)₃ + 3 H₂

We can see that 3 moles of hydrogen gas are produced for every 3 moles of H₂SO₄.

Given that the concentration of sulfuric acid is 0.92 M and the volume used is 35 mL, we can calculate the number of moles of H₂SO₄ used:

moles of H₂SO₄ = concentration * volume

moles of H₂SO₄ = 0.92 M * 0.035 L = 0.0322 moles

Therefore, the number of moles of hydrogen gas produced is also 0.0322 moles.

Then convert the temperature to Kelvin:

23 °C + 273.15 = 296.15 K

Plug the values into the ideal gas law equation to find the volume of hydrogen gas:

PV = nRT

(0.9797 atm) * V = (0.0322 mol) * (0.0821 L·atm/(mol·K)) * (296.15 K)

Solving for V:

V = (0.0322 mol) * (0.0821 L·atm/(mol·K)) * (296.15 K) / (0.9797 atm)

V ≈ 0.823 L

Learn more about ideal gas law: https://brainly.com/question/12624936

#SPJ11

A sample currently contains 20 parent atoms and 60 daughter atoms. so the sample is approximately 4,706 years old.

To determine the age of the sample, we need to use the formula for radioactive decay:
N = N0(1/2)^(t/T)
where N is the current number of parent atoms, N0 is the initial number of parent atoms, t is the time elapsed, T is the half-life of the sample.
We are given that N0 = 20 and N/N0 = 60/20 = 3. Thus, we can solve for t:
3 = (1/2)^(t/2000)
Taking the natural log of both sides:
ln(3) = (t/2000) ln(1/2)
Solving for t:
t = 2000 ln(3)/ln(1/2)
t ≈ 4,706 years
Therefore, the sample is approximately 4,706 years old.

we can determine the age of the sample using the half-life of 2,000 years and the ratio of parent to daughter atoms.
The sample contains 20 parent atoms and 60 daughter atoms, making a total of 80 atoms. The ratio of parent to daughter atoms is 1:3. Since the half-life is 2,000 years, we can calculate the number of half-lives that have passed to reach this ratio.
Initially, there would have been 80 parent atoms and 0 daughter atoms. After the first half-life (2,000 years), there would be 40 parent atoms and 40 daughter atoms. After the second half-life (another 2,000 years), there would be 20 parent atoms and 60 daughter atoms, which matches the given information.
So, two half-lives have passed to reach the current state of the sample. Each half-life is 2,000 years long, so the age of the sample can be calculated as follows
Age of the sample = (Number of half-lives) * (Half-life)
Age of the sample = 2 * 2,000 years
Age of the sample = 4,000 years
Therefore, the sample is approximately 4,000 years old.

learn more about atoms

https://brainly.com/question/1566330

#SPJ11

The [tex]G^\circ_{\text{rxn}}[/tex] for the given reaction is -560.1 kJ/mol. The calculation involves converting H and S to kJ/mol and using the equation [tex]G^\circ_{\text{rxn}}[/tex] = [tex]H^\circ_{\text{rxn}} - T \cdot S^\circ_{\text{rxn}}[/tex] where T is the temperature in Kelvin.

To calculate the standard Gibbs free energy change ([tex]G_{\text{rxn}}[/tex]) for the given reaction, use the equation:

[tex]G_{\text{rxn}} = H_{\text{rxn}} - T \cdot S_{\text{rxn}}[/tex]

where [tex]H^\circ_{\text{rxn}}[/tex] and [tex]S^\circ_{\text{rxn}}[/tex] are the standard enthalpy and entropy changes, respectively, and T is the temperature in Kelvin.

First, convert the given enthalpy and entropy changes to units of kJ/mol:

[tex]H_{\text{rxn}} = -133.9 \, \text{kJ/mol} + 50.6 \, \text{kJ/mol} - 285.8 \, \text{kJ/mol} = -369.1 \, \text{kJ/mol}[/tex]

[tex]S_{\text{rxn}} = 266.9 \, \text{J/mol} \cdot \text{K} + 121.2 \, \text{J/mol} \cdot \text{K} + 191.6 \, \text{J/mol} \cdot \text{K} + 70.0 \, \text{J/mol} \cdot \text{K} = 649.7 \, \text{J/mol} \cdot \text{K} = 0.6497 \, \text{kJ/mol} \cdot \text{K}[/tex]

Next, determine the temperature of the reaction. If the temperature is not given, assume it is at standard conditions of 298 K.

Using the given values, we get:

[tex]\Delta G_{\text{rxn}} = (-369.1 \, \text{kJ/mol}) - (298 \, \text{K})(0.6497 \, \text{kJ/mol} \cdot \text{K}) = -560.1 \, \text{kJ/mol}[/tex]

Therefore, the standard Gibbs free energy change for the reaction is -560.1 kJ/mol.

To know more about the Gibbs free energy refer here :

https://brainly.com/question/13798790#

#SPJ11

According to the information in Table 1., Al metal requires the most energy to raise 1.00 g of it by 1.00ºC

The specific heat capacity of a substance represents the amount of energy required to raise the temperature of a given mass of that substance by 1 degree Celsius. In this case, we are comparing the specific heat capacities of aluminum (Al), nickel (Ni), copper (Cu), and lead (Pb) to determine which metal requires the most energy to raise its temperature. Among the given metals, aluminum (Al) has the highest specific heat capacity value of 0.903 J/g·°C. This means that it takes 0.903 Joules of energy to raise the temperature of 1 gram of aluminum by 1 degree Celsius.

On the other hand, nickel (Ni) has a lower specific heat capacity of 0.444 J/g·°C, copper (Cu) has a specific heat capacity of 0.389 J/g·°C, and lead (Pb) has the lowest specific heat capacity of 0.128 J/g·°C. Since aluminum has the highest specific heat capacity value, it requires the most energy to raise the temperature of 1.00 gram of it by 1.00 degree Celsius.

Learn more about specific heat here:

https://brainly.com/question/31608647

#SPJ11

The concentration of CH₃OCH₃ after 5158 seconds will be approximately 4.44×10⁻³ M.

To solve this problem, we can use the first-order rate equation:

ln([A]ₜ/[A]₀) = -kₜ₋₁t

Where:

[A]ₜ is the concentration of reactant A at time t,

[A]₀ is the initial concentration of reactant A,

kₜ₋₁ is the rate constant,

t is the time.

We need to find [A]ₜ (the concentration of CH₃OCH₃ after 5158 s).

Using the equation above, we rearrange it to solve for [A]ₜ:

[A]ₜ = [A]₀ * e^(-kₜ₋₁t)

Substituting the given values:

[A]ₜ = (3.48×10⁻² M) * e^(-4.00×10⁻⁴ s⁻¹ * 5158 s)

Calculating this expression:

[A]ₜ = (3.48×10⁻² M) * e^(-2.0632)

[A]ₜ ≈ (3.48×10⁻² M) * 0.1275

[A]ₜ ≈ 4.44×10⁻³ M

Learn more about The Concentration in the link: https://brainly.com/question/3045247

#SPJ11

We will prove by induction that every k-dimensional hypercube has a Hamiltonian circuit.

Base case: For k=1, the line segment graph has a Hamiltonian circuit.

Inductive step: Assume that every (k-1)-dimensional hypercube has a Hamiltonian circuit. Consider a k-dimensional hypercube. Divide it into two (k-1)-dimensional hypercubes as shown in the figure. By the inductive hypothesis, each of these has a Hamiltonian circuit. Start at any vertex and traverse the first hypercube's Hamiltonian circuit, then traverse the edge connecting the two hypercubes, and then traverse the second hypercube's Hamiltonian circuit in reverse order. This gives a Hamiltonian circuit for the k-dimensional hypercube, which completes the proof by induction.

To know more about Hamiltonian circuit, here

brainly.com/question/27586562

#SPJ4

The correct answer for the redox reaction is D. Pb(s) + 2 Ag⁺(aq) → Pb₂⁺(aq) + 2 Ag(s). This is a complete redox reaction for a Pb/Pb₂⁺ || Ag⁺/Ag cell.

The cell consists of two half-cells, an anode (Pb/Pb₂⁺ half-cell) and a cathode (Ag/Ag⁺ half-cell).

In the anode half-cell, lead (Pb) is oxidized to form lead ions (Pb₂⁺) and two electrons (e⁻). The half-cell reaction is represented as Pb(s) → Pb₂⁺(aq) + 2 e⁻.

In the cathode half-cell, silver ions (Ag⁺) are reduced to form silver (Ag) and one electron (e⁻). The half-cell reaction is represented as Ag⁺(aq) + e⁻ → Ag(s).

When the two half-cell reactions are combined, the two electrons from the anode half-cell are transferred to the cathode half-cell, where they are used in the reduction of Ag+ ions. The overall balanced redox reaction for the cell is:

Pb(s) + 2 Ag⁺(aq) → Pb₂⁺(aq) + 2 Ag(s)

This reaction shows that lead is oxidized to form lead ions and silver ions are reduced to form silver. The oxidation and reduction reactions occur simultaneously in the two half-cells and result in the flow of electrons through the external circuit, generating an electric current.

To know more about redox reaction, refer here:

https://brainly.com/question/13293425#

#SPJ11

liquid drain cleaner is an alkaline base with a pH of 13.5, while milk is slightly acidic with a pH of 6.6.

Liquid drain cleaner with a pH of 13.5 is classified as a base. Substances with a pH above 7 are considered basic or alkaline, and a pH of 13.5 indicates a highly alkaline solution.

Milk, on the other hand, with a pH of 6.6, is slightly acidic. pH values below 7 are indicative of acidic substances. While milk is generally considered slightly acidic, its acidity is relatively mild and not noticeable to taste.

In summary, liquid drain cleaner is an alkaline base with a pH of 13.5, while milk is slightly acidic with a pH of 6.6.

To know more about Acid-Base related question visit:

https://brainly.com/question/23687757

#SPJ11

Answer:the pressure inside the flask will increase rapidly, and this can cause the flask to implode.

Explanation:)

All of the compounds in aqueous solution, namely H₂CO₃(aq), NH₄Cl(aq), and LiOH(aq), act as weak electrolytes.

All of the compounds listed, H₂CO₃ (carbonic acid), NH₄Cl (ammonium chloride), and LiOH (lithium hydroxide), are weak electrolytes when dissolved in water. A weak electrolyte is a substance that only partially dissociates into ions when dissolved in a solvent, resulting in a relatively low conductivity compared to strong electrolytes.

Carbonic acid (H₂CO₃) is a weak acid formed from carbon dioxide. When it is dissolved in water, it undergoes partial ionization, releasing a small amount of H⁺ (hydrogen ion) and HCO₃⁻ (bicarbonate ion). Similarly, ammonium chloride (NH₄Cl) is a salt that dissociates partially into NH₄⁺

(ammonium ion) and Cl⁻ (chloride ion) in water, exhibiting weak electrolyte behavior.

Lithium hydroxide (LiOH) is a strong base; however, in the context of the given options, it is considered a weak electrolyte. It partially ionizes in water, releasing Li⁺ (lithium ion) and OH⁻ (hydroxide ion) ions, but the extent of ionization is limited compared to strong bases.

Therefore, the correct answer is that all of the compounds mentioned—H₂CO₃, NH₄Cl, and LiOH—are weak electrolytes in aqueous solution.

Learn more about electrolytes

brainly.com/question/29039666

#SPJ11

The equilibrium constant K will be equal to 1 at 724.64 K.

To solve this problem, we can use the equation;

ΔG° = -RTln(K)

where ΔG° is the standard Gibbs free energy change,

R is the gas constant,

T is the temperature in Kelvin, and

K is the equilibrium constant.

We can also use the equations ΔG° = ΔH° - TΔS° and ΔG° = 0 at equilibrium.

Setting these two equations equal to each other and solving for T, we get:

ΔH° - TΔS° = -RTln(K)
100,000 - T(138) = -(8.314)(ln(1))
100,000 - 138T = 0
T = 724.64 K

Therefore, at a temperature of 724.64 K (451.49°C), the equilibrium constant K would equal 1.

Learn more about equilibrium constant here:

https://brainly.com/question/31321186

#SPJ11

The zinc metal (Zn) is oxidized to Zn²+ ions, while Fe²+ ions are reduced to elemental iron (Fe). This reaction occurs because zinc has a higher tendency to undergo reduction than Fe²+, zinc metal will reduce Fe²+ ions.

The question presents a mixture of powdered zinc and iron added to a solution containing Fe²+ and Zn²+ ions, each at unit activity. The question then asks what reaction will occur.

To determine this, we need to consider the standard reduction potentials (E) provided for each species.

Fe³+(aq) + e- --> Fe²+(aq) +0.77V

Fe²+(aq) + 2e- --> Fe(s) -0.44V

Zn²+(aq) + 2e- --> Zn(s) -0.76V

The reaction that will occur is the one with the highest positive voltage, which indicates a greater tendency towards reduction. Based on the standard reduction potentials, zinc has the highest tendency to undergo reduction, followed by Fe³+ and then Fe²+.

zinc metal will reduce Fe²+ ions. This reaction can be represented as :-Zn(s) + Fe²+(aq) --> Zn²+(aq) + Fe(s)

To know more about Zinc refer here :-

https://brainly.com/question/13890062#

#SPJ11

The pH of the solution is approximately 1.22 when rounded to two decimal places.

To find the pH of the solution, we need to use the concentration of the HNO3 and the volume of the solution. First, we need to calculate the new concentration of the solution after it has been diluted. We can use the equation: C1V1 = C2V2
Where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

To calculate the pH of the diluted solution, first determine the moles of HNO3 present, then calculate the concentration of HNO3 in the diluted solution, and finally use the pH formula.
1. Moles of HNO3 = (Volume × Concentration)
Moles of HNO3 = (15.0 mL × 4.00 M HNO3) × (1 L / 1000 mL) = 0.060 moles HNO3
2. Concentration of HNO3 in the diluted solution:
New concentration = Moles of HNO3 / New volume
New concentration = 0.060 moles / 1.00 L = 0.060 M
3. Calculate pH using the formula: pH = -log[H+]
Since HNO3 is a strong acid, it dissociates completely in water, so [H+] = [HNO3]. Therefore:
pH = -log(0.060)

To know more about solution visit :-

https://brainly.com/question/30665317

#SPJ11

Sn(s) + 2Ag+(aq) → Sn2+(aq) + 2Ag(s) (net cell equation)

Net cell equation: Sn(s) + 2Ag+(aq) → Sn2+(aq) + 2Ag(s)

In the given electrochemical cell, the net cell equation represents the overall reaction that occurs at the electrodes. The cell consists of two half-cells separated by a double vertical line, indicating a salt bridge. The left half-cell has a tin electrode (Sn(s)) immersed in a solution containing tin(II) ions (Sn2+(aq)). The right half-cell has a silver electrode (Ag(s)) immersed in a solution containing silver ions (Ag+(aq)).

The net cell equation shows the transformation of reactants into products. In this case, the solid tin electrode (Sn(s)) loses two electrons to become tin(II) ions (Sn2+(aq)), while the silver ions (Ag+(aq)) from the solution gain two electrons to form solid silver (Ag(s)). The stoichiometric coefficients in the equation represent the number of electrons transferred in the redox reaction.

It's important to note that the concentrations are not included in the net cell equation, as the equation solely focuses on the electron transfer process occurring at the electrodes. The concentrations of the species involved in the solution may affect the cell potential, but they are not directly represented in the net cell equation.

Understanding the net cell equation helps in analyzing and predicting the behavior of electrochemical cells, including their voltage, direction of electron flow, and the oxidizing and reducing agents involved.

Learn more about electrochemical cells

brainly.com/question/31604301

#SPJ11

The metal M in the solution is titanium (Ti), as determined by using Faraday's law of electrolysis and calculating the molar mass based on the amount of substance deposited during the electrolysis. Here option D is the correct answer.

The electrolysis process involves the use of electric current to drive a non-spontaneous chemical reaction. In this case, the unknown metal M is being plated out of the solution containing M(NO3)2.

To determine the identity of the metal, we can use Faraday's law of electrolysis, which relates the amount of substance deposited on an electrode to the quantity of electric charge passed through the electrolyte.

The formula for Faraday's law is:

Q = nF

where Q is the quantity of electric charge (in coulombs), n is the number of moles of a substance deposited on the electrode, and F is Faraday's constant (96,485 C/mol).

We can use this formula to determine the number of moles of metal deposited during the electrolysis:

n = Q/F

To calculate Q, we can use the formula:

Q = It

where I is the current (in amperes) and t is the time (in seconds).

Substituting the given values, we get:

Q = 2.00 A x 74.1 s = 148.2 C

Substituting into the formula for n, we get:

n = 148.2 C / 96485 C/mol = 0.001536 mol

The molar mass of the metal can be calculated using the mass of metal deposited:

m = nM

where m is the mass of metal (in grams) and M is the molar mass of the metal (in g/mol).

Substituting the given values, we get:

0.0737 g = 0.001536 mol x M

M = 48.0 g/mol

Comparing this molar mass to the molar masses of the possible metals (Rh = 102.9 g/mol, Cu = 63.5 g/mol, Cd = 112.4 g/mol, Ti = 47.9 g/mol, Mo = 95.9 g/mol), we can see that the metal is titanium (Ti).

To learn more about Faraday's law

https://brainly.com/question/13369951

#SPJ4

The number of photons emitted from the laser pointer in one second can be calculated using the power of the laser, the energy of the photons, and the relationship between power and energy.

The power of a laser pointer is typically measured in milliwatts (mW). Let's assume the laser pointer has a power output of 5 mW.

The energy of each photon is related to the wavelength of the laser light. Let's assume the laser pointer emits light with a wavelength of 650 nanometers (nm), which corresponds to red light. The energy of each photon can be calculated using the following formula:

E = hc/λ

Where E is the energy of each photon, h is Planck's constant (6.626 x 10⁻³⁴ joule seconds), c is the speed of light (299,792,458 meters per second), and λ is the wavelength of the light in meters.

Plugging in the values for h, c, and λ, we get:

E = (6.626 x 10⁻³⁴ J s)(299,792,458 m/s)/(650 x 10⁻⁹ m) ≈ 3.04 x 10⁻¹⁹ joules

Now, to calculate the number of photons emitted from the laser pointer in one second, we can use the following formula:

Number of photons = Power/ Energy per photon

Plugging in the values for power and energy per photon, we get:

Number of photons = (5 x 10⁻³ W) / (3.04 x 10⁻¹⁹ J) ≈ 1.64 x 10¹⁶photons/second

Therefore, approximately 1.64 x 10¹⁶ photons are emitted from the laser pointer in one second.

To know more about photon emission visit:

https://brainly.com/question/726233

#SPJ11

We can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature to find the volume of H2 gas  which is 58.2 L.

To calculate the volume of H2 gas produced, we can use the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

First, we need to determine the number of moles of Zn used in the reaction. We can do this by dividing the given mass of Zn by its molar mass. The molar mass of Zn is 65.38 g/mol.

Number of moles of Zn = 5.98 g Zn / 65.38 g/mol = 0.0915 mol Zn

According to the balanced equation, the molar ratio between Zn and H2 is 1:1. Therefore, the number of moles of H2 produced is also 0.0915 mol.

Now, we can calculate the volume of H2 gas using the ideal gas law. We need to convert the given pressure from atm to Pa and the temperature from Kelvin to Celsius.

P = 0.978 atm × 101325 Pa/atm = 99,360.45 Pa

T = 298 K

Plugging in the values: V = (nRT) / P

= (0.0915 mol × 8.314 J/(mol·K) × 298 K) / 99,360.45 Pa

= 0.0582 m³ = 58.2 L

Therefore, the volume of H2 gas collected is 58.2 L, which is approximately equal to 4.58 L

LEARN MORE ABOUT gas law here: brainly.com/question/30458409

#SPJ11

The molarity of the oxalic acid solution is 0.3125 M.

First, let's write the balanced equation for the reaction:

[tex]H_2C_2O_4 + 2NaOH[/tex] ⇒ [tex]Na_2C_2O_4[/tex] + [tex]2H_2O[/tex]

From the equation, we can see that one mole of oxalic acid ([tex]H_2C_2O_4[/tex]) reacts with two moles of NaOH.

Therefore, the number of moles of NaOH used can be calculated using the formula:

moles of NaOH = molarity of NaOH x volume of NaOH (in liters)

= 0.2500 mol/L x 0.02500 L

= 0.00625 mol

Since the stoichiometry of the reaction is 1:1 between [tex]H_2C_2O_4[/tex] and NaOH, we can conclude that the number of moles of oxalic acid used is also 0.00625 mol.

molarity = moles of solute / volume of solution (in liters)

The volume of the oxalic acid solution is given as 20.00 mL, which is equal to 0.02000 L.

molarity = 0.00625 mol / 0.02000 L

= 0.3125 M

To learn more about molarity follow the link:

https://brainly.com/question/31545539

#SPJ4

In chemoheterotrophs, cellular metabolism is primarily fueled by chemical energy in the form of organic compounds obtained from external sources.

These organisms rely on the intake of complex organic molecules, such as carbohydrates, proteins, and lipids, from their environment as sources of energy. Once these organic compounds are ingested, they undergo various metabolic processes to break them down into smaller molecules. The energy stored in the chemical bonds of these molecules is then extracted through a series of enzymatic reactions in a process called cellular respiration. During cellular respiration, the organic molecules are oxidized, releasing electrons that are passed through a series of electron carriers in the electron transport chain. This process generates adenosine triphosphate (ATP), the primary energy currency of cells. ATP provides the necessary energy for cellular activities, such as biosynthesis, active transport, and movement.

The breakdown of organic compounds and the subsequent production of ATP occur through different metabolic pathways, including glycolysis, the citric acid cycle, and oxidative phosphorylation. Overall, chemoheterotrophs obtain energy for cellular metabolism by oxidizing organic compounds, generating ATP through cellular respiration. This allows them to meet their energy needs for growth, maintenance, and reproduction.

Learn more about cellular respiration here:

https://brainly.com/question/29760658

#SPJ11

The pressure of the gas is 2.56 x 10^5 Pa, which is closest to option (d) 3.02 x 10^4 Pa.

To find the pressure of the gas, we can use the Ideal Gas Law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume from 0.005 m to m^3 by dividing by 1000: 0.005/1000 = 5 x 10^-6 m^3.
Next, we need to convert the temperature from Celsius to Kelvin by adding 273.15: 30.0°C + 273.15 = 303.15 K.
Plugging in the values, we get: P x 5 x 10^-6 m^3 = 6.00 mol x 8.31 J/mol-K x 303.15 K.
Simplifying, we get: P = (6.00 mol x 8.31 J/mol-K x 303.15 K) / (5 x 10^-6 m^3) = 2.56 x 10^5 Pa.
Therefore, the pressure of the gas is 2.56 x 10^5 Pa, which is closest to option (d) 3.02 x 10^4 Pa.

To know more about Ideal gas visit:

https://brainly.com/question/8711877

#SPJ11

0.008947 moles of solute.

To calculate the number of moles of solute, we use the formula:

moles = concentration (in mol/L) x volume (in L)

First, we need to convert the given volume of 83.85 ml to liters by dividing it by 1000:

83.85 ml ÷ 1000 ml/L = 0.08385 L

Next, we plug in the given concentration and volume into the formula:

moles = 0.1065 mol/L x 0.08385 L = 0.008947 moles

Therefore, the number of moles of solute in 83.85 ml of 0.1065 M K2Cr2O7 (aq) is 0.008947 moles.

Learn more about moles here :

https://brainly.com/question/31597231

#SPJ11

In the Gabriel synthesis, potassium phthalimide acts as a nitrogen source, while the alkyl halide provides the alkyl group. The reaction results in the formation of an N-alkylphthalimide, which upon hydrolysis with aqueous ammonia yields the corresponding primary amine.

(a) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with ethyl bromide, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + Ethyl bromide → N-Ethylphthalimide + KBr
N-Ethylphthalimide + Aqueous ammonia → NH2 + Phthalic acid

(b) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with benzyl bromide, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + Benzyl bromide → N-Benzylphthalimide + KBr
N-Benzylphthalimide + Aqueous ammonia → NH2 + Phthalic acid

(c) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with 1-bromobutane, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + 1-Bromobutane → N-Butylphthalimide + KBr
N-Butylphthalimide + Aqueous ammonia → NH2 + Phthalic acid

(d) To make NH2 using Gabriel synthesis, we need to react potassium phthalimide with 1-bromo-3-chloropropane, followed by the addition of aqueous ammonia. The reaction can be represented as follows:
Phthalimide + 1-Bromo-3-chloropropane → N-(3-Chloropropyl)phthalimide + KBr
N-(3-Chloropropyl)phthalimide + Aqueous ammonia → NH2 + Phthalic acid

To know more about "Gabriel synthesis" refer here:

https://brainly.com/question/31609914#

#SPJ11

When granular polystyrene is placed in boiling water, it begins to soften and melt. As the temperature increases, the polystyrene molecules become more mobile and start to move around. If the melted polystyrene is then rapidly cooled, such as by pouring it into a mold or exposing it to cold air, the polystyrene solidifies in a cellular structure, forming a foam.

When granular polystyrene is heated, it softens and begins to melt. At high temperatures, it can decompose to form a mixture of styrene monomers and other byproducts. However, when the melted polystyrene is cooled rapidly, such as by pouring it into a mold or exposing it to cold air, it can solidify in a cellular structure, forming a foam.

Styrofoam is a brand name for a type of polystyrene foam that is made by suspending tiny beads of polystyrene in a liquid and then subjecting them to steam. The steam causes the beads to expand and fuse together, forming a foam with a low density and excellent thermal insulation properties.

In summary, the formation of Styrofoam from granular polystyrene when it is placed in boiling water is due to the melting of polystyrene followed by its rapid cooling, which results in the formation of a foam with a cellular structure.

For more question on polystyrene click on

https://brainly.com/question/30050448

#SPJ11

The pH of the half-way point in the titration of a 0.50 L solution of 0.10 M hydrofluoric acid [HF] with 0.10 M NaOH can be calculated using the Henderson-Hasselbalch equation which is equal to 3.15.

At the half-way point, equal moles of HF and NaOH have reacted, which means that 0.05 moles of HF have reacted with 0.05 moles of NaOH. This leaves 0.05 moles of HF in the solution, which is in equilibrium with its conjugate base, F⁻. The pKa of HF is 3.15, so the Ka can be calculated as 10^(-3.15) = 7.94 × 10^(-4).

The Henderson-Hasselbalch equation is pH = pKa + log([A⁻]/[HA]), where [A⁻] is the concentration of the conjugate base (in this case, F⁻) and [HA] is the concentration of the acid (HF).

At the half-way point, the concentration of HF is 0.05 M and the concentration of F⁻ is also 0.05 M (since they have reacted in a 1:1 ratio). Plugging these values into the equation gives pH = 3.15 + log(0.05/0.05) = 3.15.

To know more about Henderson-Hasselbalch equation, refer here:

https://brainly.com/question/13423434#

#SPJ11