Answer:
b
Explanation:
jus bc
Fluorine F₂ is the correct formula for two atoms in sharing of electrons as they have covalent bond among them. Therefore, option (A) is correct.
What is a covalent bond?A covalent bond is created through sharing of electrons between different or the same kinds is known as a covalent Bond.
A covalent bond has equal sharing of electrons among bonded atoms. The pair of electrons which is shared between atoms is known as shared pair.
Sharing of electrons will help atoms to attain stability in their valence shell as noble gases. Atoms share their electrons with the other atoms in a way so that both atoms can gain octet configuration in their valence shell.
The bond between two fluorine atoms is a covalent bond formed by sharing of electrons. The Bond between sodium and chlorine in NaCl, KBr, and CaCl₂ is an ionic bond formed by the complete transfer of electrons.
Learn more about the covalent bond, here:
brainly.com/question/19382448
#SPJ2
I have a question. Does anyone have a crush on their classmates? I do!
Answer:
I never had a crush on anyone
Explanation:
I’m not good at chemistry
Answer:
λ = 5.56 × 10⁻³ m
Explanation:
You have to use the formula c = λv to solve the problem. Review what you are given. You are given v and c, where v = 5.40 × 10¹⁰ Hz and c = 3.00 × 10⁸ m/s. The value c is for the speed of light and is something you need to memorize. You will use it often in physics and sometimes in chemistry.
Now that you figured out what you know, you can see that there is only one unknown, allowing you to solve.
c = λv
λ = c/v
λ = (3.00 × 10⁸ m/s)/(5.40 × 10¹⁰ Hz)
λ = 5.56 × 10⁻³ m
a object in a fluid will sink if the
help plz
Answer:
D.
Explanation:
Because if an object is more dense than water it will sink.
A chemist dissolves 320.mg of pure nitric acid in enough water to make up 290.mL of solution. Calculate the pH of the solution. Be sure your answer has the correct number of significant digits.
Answer:
1.7
Explanation:
The formula to be used here is;
pH = -log[H⁺]
To determine the concentration of H⁺ of the nitric acid (HNO₃), formula for molarity is used
Molarity = number of moles/volume (in dm³ or L)
number of moles (n) = given mass/molar mass
Molar mass of HNO₃ = 1 + 14 + (16 x 3)
= 63g
given mass (in grams) = 320mg⇔0.32g (where 1000mg = 1g)
Thus; n = 0.32/63
n = 0.0051 moles
Volume of acid = 290 mL ⇔ 0.29 L (where 1000 mL = 1L)
Molarity = n/volume;
0.0051/0.29
Molarity = 0.018M
pH = -log 0.018
pH = 1.7
How many km are in a foot
Answer:
0.000305 km
Explanation:
1 foot = 0.000305 kilometers
Answer:
[\tex]\huge\bold\red{brainiest answer}[/tex]1 km =3,280.8398950131foot
What do you notice about the relationship between the force strength and the size of the velocity change? HELP MEEEEE
Velocity change increases as the force increases.
Even though this question is incomplete, but we can approach it from the stand point of Newton's second law of motion.
According to this law, force is directly proportional to change in velocity.
F = m(v - u)/t
F = force applied
m = mass of the body
v = final velocity of the body
u = initial velocity of the body
t = time taken
This means that velocity change increases as force increases.
Learn more: https://brainly.com/question/19860811
what are the names of the subatomic particles in an atom
Answer:
Protons, Neutrons and electrons
Explanation:
Classify the sugars as either aldoses or ketoses. A Fischer projection with a six carbon backbone. Carbon one is an aldehyde and carbon six is part of the group C H 2 O H. Carbons two and three have an hydroxide group on the left, and carbons four and five have an hydroxide group on the right. A Fischer projection of a six carbon backbone. Carbons one and six are part of a C H 2 O H group. Carbon two is attached to a ketone, carbons three and four have a hydroxide group on the left, and carbon five has a hydroxide group on the right. A Fischer projection with a five carbon backbone. Carbon one is an aldehyde, carbon five is part of the group C H 2 O H, and carbons two through four have an hydroxide group on the right. A Fischer projection with a three carbon backbone. Carbon one is an aldehyde, carbon three contains the group C H 2 O H, and carbon two has a hydroxide group on the right. A Fischer projection with a five carbon backbone. Carbons one and five are part of a C H 2 O H group. Carbon two is attached to a ketone and carbons three and four have a hydroxide group on the right. A Fischer projection of a four carbon backbone. Carbons one and four are part of a C H 2 O H group. Carbon two is attached to a ketone and carbon three has a hydroxide group on the right. Answer Bank
Answer AND Explanation: Carbohydrates or sugars have three classes:
Monossaccharides: made from a single polyhydroxy aldehyde or ketone unit;Oligosaccharides: formed by short chains of monossacharides united by glycosidic linkage;Polysaccharides: consist of a long chain of monossaccharides;Monossaccharides are formed by a chain of unbranched carbon, all bonded by single bonds, except for a carbon that is double-bonded by an oxygen. This bond form a carbonyl group.
If the carbonyl is at an end of the chain, the carbon is aldehyde and the molecule is called aldose. If the group is in any other position, it is a ketone and is called ketose
So analysing each projection:
1) Carbon one is a aldehyde, which means is a carbonyl and there are no other carbons forming that bond, so it's a ALDOSE
2) Carbon two is attached to a ketone and other carbons aren't, so it's a KETOSE.
3) Carbon one is aldehyde, so it's ALDOSE
4) Carbon one is aldehyde, so ALDOSE
5) Carbon two is attached to ketone, so KETOSE
6) Carbon two attached to a ketone, so KETOSE
the pH of a HClO4 solution was measured as 4.251. What would be the concentration of HClO4 in this solution
Answer:
[tex]0.000056[/tex]
Explanation:
If [tex]pH[/tex] is given then hydronium ion concentration is equal to [tex]-log[H_3O^+][/tex]
The hydronium ion concentration can be found from the pH using the following formula:
Hydronium ion concentration = [tex]10^{-pH}[/tex]
As the pH of a HClO4 solution was measured as 4.251,
put [tex]pH=4.251[/tex]
So,
Concentration of HClO4 in the solution = [tex]10^{-4.251}=0.000056[/tex]
What would be the formal charge of N in NO2?
Answer:
What would be the formal charge of N in NO2?
Explanation:
The nitrogen gets two electrons for the double bond, one from the single bond and one from the half-filled orbital associated with it. That's a total of 4 and gives N a +1 formal charge since itneeds 5 to be neutral. The Rules for Writing Lewis Structures has some discussion of formal charge in it.
Which field is not a branch of biology
Botany
Geology
Zoology
Genetics
Answer:
Geology
Explanation:
Geology is not a branch of biology.
Biology is the study of all forms of lives. Bio - life and logy - study
It consists of studies of plants, animals and micro-organisms. Some of its sub-branches are zoology, botany, genetics, micro-biology e.t.c.
Geology is the study of the earth. It deals with the materials that makes up the earth and how they have evolved through time. some of its sub-disciplines are hydro-geology, stratigraphy, geochemistry e.t.cAnswer:
geology
Explanation: I took the test.
"Why does a hamburger have fewer calories than a steak? Because it's in the ground state!" Explain the joke while also highlighting what the ground state means for electrons in a way that someone who has never taken chemistry before will understand.
Answer:
it means a hamburger has less calories bc its referring to steak that has been grounded and the highlight would be calories
Which characteristics describe the genetic code of humans? Select three options
Answer:
1. Can help in development of effective medications
2. Can help explain genetic diseases
3. Composed of about 19,000 genes
Explanation:
The other answer options are misleading.
Genetic code of humans can help with understanding more than just human genetics.
Human genetics is composed of 23 chromosome pairs, for a total of 46 chromosomes.
What is the frequency of a photon with an energy
Answer:
option b is correct option = (6.76×10¹⁴ Hz)
Explanation:
Given data:
Wavelength of photon = 4.42×10⁻⁷ m
Speed of light = 2.99×10⁸ m/s
Frequency of radiation = ?
Solution:
Formula:
Speed of wave = frequency × wavelength
Now we will rearrange this formula.
frequency = Speed of wave / wavelength
f = c/ λ
f = 2.99×10⁸ m/s / 4.42×10⁻⁷ m
f = 0.676×10¹⁵ Hz (s⁻¹ = Hz)
f = 6.76×10¹⁴ Hz
Thus option b is correct option.
An object accelerates 12.0 m/s2 when a force of 6.0 newtons is applied to it. What is the mass of the object?
Answer:
The mass of object is 0.5 Kg.
Explanation:
Given data:
Acceleration of object = 12.0 m/s²
Force on object = 6.0 N
Mass of object = ?
Solution:
Formula:
F = m×a
F = force
m = mass
a = acceleration
Now we will put the values in formula.
6.0 N = m × 12.0 m/s²
m = 6.0 N / 12.0 m/s²
( N = kg.m/s²)
m = 0.5 kg
The mass of object is 0.5 Kg.
The difference between the two types of succession !!!??!?
Answer:
Hope it help you
Stayhomestaysafe
Plz mark my answer brainliest✍️✍️
Explanation:
Primary succession is the series of community changes which occur on an entirely new habitat which has never been colonized before. For example, a newly quarried rock face or sand dunes. Secondary succession is the series of community changes which take place on a previously colonized, but disturbed or damaged habitat.
REAL NAME - SHRESTH DUBEY
Identifying Qualitative and quantitative Data
Sort the data collected about a colony of bacteria into qualitative or quantitative data.
spreads across plate
Qualitative Data
Qua
200 purple colonies total
circular in shape
stained purple
75 colonies did not stain purple
55 colonies grew at room temp
Answer:
qualitative data : quantitative data :
circular in shape 75 colonies ...
stained purple 200 purple ..
spreads across plate 55 colonies ...
Explanation:
i got it right :) .
Answer:
Same XD Have a bless day ^﹏^^O^^O^^O^
Explanation:
Which of the following cannot be read directly from the periodic table?
an element's atomic mass
an element's number of neutrons
an element's symbol
an element's number of protons
Matter is anything that has mass. What is the smallest unit of matter known as?
Atom
Liquid
Proton
Nucleus
Answer:
Atom
Explanation:
Its the smallest unit into which matter can be divided without the release of electrically charged particles.
which statement is true about the atomic masses?
A: it is never greater than the atomic number.
B: it can be greater than the atomic number.
C: it always equals the atomic.
D: it is always lower than the atomic number.
it is never greater than the atomic number.
OR,
Atomic mass is greater than Atomic number.. so, Answer is A . If you like this answer then mark this answer as BRAINLIEST answer.Thank you ☺️☺️
what’s the answer??
Answer:
7.0
Explanation:
P1V1=P2V2 if temperature and moles are constant, which they appear to be
3.5*2.5=1.25x
x=8.75/1.25
x=7
How can you use the periodic table to predict reactivity?
Giving Brainliest!!!
Answer:
hi
Explanation:
how r u today
All living things must maintain stable body conditions (homeostasis).
A. True
B. False
Which characteristic describes bases?
taste sour
feel slippery
react with metals
are used to remove rust
Answer:
feel slippery
Explanation:
Bases are certain metallic oxides, metallic hydroxides and aqueous ammonia. They typically have the following characteristics;
The aqueous solution of many of them have a bitter taste. The aqueous solutions of bases have soapy or slippery feel and the strong bases are very caustic to the skin. Their aqueous solutions have a pH greater than 7. Bases have the ability to change the color of indicators. They are conduct electricity and are said to be electrolytes.From the choices given, the fitting answer is that bases have a slippery feel.
Answer:
B) Feel slippery
Explanation:
Just did the assignment
Q1. Why is Cl2 a nonpolar molecule, but HCl is a polar molecule? Explain your reasoning.
Answer:
\/\/
Explanation:
in CI2 the electron charge is identical on both atoms but on HCI electrons are shared unequally between the chlorine atoms and hydrogen atoms
Calculate the number of hydrogen atoms in 41.4 g of
ethyl alcohol, C2H60.
Answer:
3.25 x 10²⁴ atoms of H
Explanation:
First you have to convert from grams to moles of C₂H₆O using the molar mass of C₂H₆O, which is 46.06 g/mol. Then convert from moles of C₂H₆O to moles of H using the ratio within the compound; for every molecule of C₂H₆O, there are 6 H atoms. Then lastly, because moles just represent a number in the same way a dozen does, we convert from moles of H to the number of atoms of H. 1 mole H = 6.022 x 10²³ atoms of H.
[tex]41.4g*\frac{1molC2H6O}{46.06C2H6O} * \frac{6 mol H}{1molC2H6O} * \frac{6.022 * 10^2^3atomsH}{1molH} = 3.2476 x 10^2^4atomsH[/tex]
Round to lowest number of significant figure which is three to get 3.25 x 10²⁴.
To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. The the total number of atoms of hydrogen atoms in 41.4 g of ethyl alcohol, C₂H₆0 is 5.35×10²³ atoms.
What is atom?Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.
Number of atoms =number of moles×6.022×10²³ (Avogadro number)
number of moles= given mass÷ Molar mass
Given mass=41.4 g
Molar mass of C₂H₆0=46.07 g/mol
number of moles= 41.4 g ÷ 46.07 g/mol=0.89mol
Number of atoms =0.89mol×6.022×10²³ (Avogadro number)
=5.35×10²³ atoms
Therefore, the total number of atoms of hydrogen atoms in 41.4 g of
ethyl alcohol, C₂H₆0 is 5.35×10²³ atoms.
To know more about atom, here:
https://brainly.com/question/13518322
#SPJ2
The storage method used for radioactive wastes generated from fission nuclear reactors must be designed to last for how long?
months
years
centuries
weeks
Answer: c
Explanation:
Answer: C - Centuries
Explanation:
Select the correct responses to the questions from the drop-down menus.
Which type of precipitation freezes when it comes into contact with a cold surface?
Which type of precipitation is round pellets of ice more than 5 millimeters in diameter?
Which type of precipitation is water vapor that condenses into ice crystals in clouds?
Answer:
Which type of precipitation freezes when it comes into contact with a cold surface?
✔ freezing rain
Which type of precipitation is round pellets of ice more than 5 millimeters in diameter?
✔ hail
Which type of precipitation is water vapor that condenses into ice crystals in clouds?
✔ snow
Explanation:
The type of precipitation that freezes when it comes into contact with a cold surface is freezing rain.
The type of precipitation that is round pellets of ice more than 5 millimeters in diameter is hail.
The type of precipitation where water vapor condenses into ice crystals in clouds is snow.
Freezing rain is the rain that is maintained at a temperature that's below freezing by ambient air mass. It's made entirely of liquid droplets.
Read related link on:
https://brainly.com/question/16381514
Element Rand Element Q have the same number of valence
electrons. These elements both have similar chemical behavior, but
Element R has fewer energy levels than Element Q. Which statement best
describes the positions of the two elements in the periodic table?
I know I'm answering super late, but I just want to help others who don't know the answer
Answer:
H. The two elements are in the same group, with Element R just above Element Q.
Explanation:
When answering a question like this, I would highly recommended using a periodic table. I used a periodic table to find the answer to the question.
30 g of pineapple added to a drink the drink rises 5 ml what is the density of the pineapple
Answer:
Density of pineapple is 6 g/mL.
Explanation:
Given data:
Mass of pineapple = 30 g
Volume rises = 5 mL
Density of pineapple = ?
Solution:
Density:
Density is equal to the mass of substance divided by its volume.
The symbol used for density is called rho. It is represented by ρ. However letter D can also be used to represent the density.
Units:
SI unit of density is Kg/m3.
Other units are given below,
g/cm3, g/mL , kg/L
Formula:
D=m/v
D= density
m=mass
V=volume
The volume rises by drink is actually the volume of pineapple.
d = 30 g/ 5 mL
d = 6 g/mL
Density of pineapple is 6 g/mL.