Q1.This question is about copper.
Please help with a!!!

We need 25.5 g of KCl and 274.5 g of water to make 300. g of 8.50% KCl solution.

To find the masses of potassium chloride (KCl) and water needed, we need to use the concentration of the solution and the total mass of the solution.

We need to find the mass of KCl in the solution. We know that the solution is 8.50% KCl by mass, so:

mass of KCl = 8.50% x 300. g = 25.5 g

We can find the mass of water in the solution by subtracting the mass of KCl from the total mass of the solution:

mass of water = 300. g - 25.5 g = 274.5 g

To create 300 g of 8.50% KCl solution, we need 25.5 g of KCl and 274.5 g of water.

To know more about the Solution, here

https://brainly.com/question/4131881

#SPJ1

Answer:  2.73 g PbSO4

Explanation:

1) solvefor moles Pb(no3)2

0.10 M X 0.09 L =0.009 moles Pb(NO3)2

2) stoichiometry from balanced chemical equation

___Pb(NO3)2 + ___H2SO4--->   PbSO4 +  ___2 HNO3

0.009 moles Pb(NO3)2 X (1 mole PbSO4 / 1 mole Pb(NO3)2) X (303.2516 g PBSO4/ 1mole PbSO4) = 2.73 g PbSO4

Answer:

copper cu++

carbonate co3--

reaction=cuco3

One liquid substance that could be used in the laboratory for dissolving dry mortar on floor tiles is hydrochloric acid (HCl). Hydrochloric acid is a strong acid commonly used in laboratories for various purposes, including cleaning and dissolving mineral deposits.

When dry mortar, which is primarily composed of cement, hardens on floor tiles, it can be challenging to remove using traditional cleaning methods. However, hydrochloric acid can effectively dissolve and break down the cementitious components of the mortar.

It is important to note that when using hydrochloric acid, proper safety precautions should be followed, such as wearing protective gloves, goggles, and working in a well-ventilated area.

Additionally, it is crucial to dilute the hydrochloric acid to an appropriate concentration for the specific task, as using it undiluted can cause damage to the tiles or other surfaces.

For more such questions on laboratory

https://brainly.com/question/29455421

#SPJ11

4) The volume of the HCl used is 9.500 mL while the volume of the NaOH used is 3.800 mL.

5) Molarity of sodium hydroxide is obtained from; Molarity of HCl * 1/2

By reacting an unknown component with a known quantity of a different chemical known as a titrant, titration is a laboratory procedure used to measure the concentration of an unknown substance, often a solute dissolved in a liquid.

The endpoint of a titration can be detected in a number of ways, depending on the specific titration being performed.

4)

Volume of the Acid used = Initial reading - Final reading = 25.00 - 15.50 = 9.500 mL

Volume of the base used = 8.80 - 5.00 = 3.800 mL

5)

We know that the mole ratio is 1:2 and the implication of this is that the set up to obtain the molarity of the sodium hydroxide solution is Molarity of HCl * 1/2

Learn more about titration:https://brainly.com/question/31271061

#SPJ1

The statement that is best supported by the data shown is this: C) Topaz is harder than a steel file.

The best supporting statement is the one that shows that Topaz has a higher hardness rating when compared to a steel file.

In the depiction, Topaz is shown as having a hardness rating of 8 while the steel file has an approximate hardness of 6.5. So, the right conclusion to reach is that Topaz is harder than a steel file.

Learn more about hardness here:

https://brainly.com/question/30322659

#SPJ1

A sp² hybrid orbital on C-1 overlaps with a sp hybrid orbital on C-2 to form the sigma bond between C-1 and C-2. This statement regarding the skeletal structure of the organic molecule true. The correct option is option A.

In general, molecules containing carbon (C) are referred to as organic compounds. Carbon atoms serve as the primary structural framework for the enormous diversity of naturally occurring compounds. Organic substances play a critical role in the existence of all life forms on Earth (and perhaps elsewhere in the universe). A sp² hybrid orbital on C-1 overlaps with a sp hybrid orbital on C-2 to form the sigma bond between C-1 and C-2.

Therefore, the correct option is option A.

To know more about organic molecule, here:

https://brainly.com/question/10504103

#SPJ1

Answer:

Explanation:

NH4I  NH4 is ammonium thus a base.  All other bases end with OH except ammonia which is NH3

The system will react by changing the concentrations to restore equilibrium when the CO and CO2 concentrations in the chemical equation 2CO + O2 2CO2 are raised. The system will try to reduce the rise in CO and CO2 by moving the reaction towards the products side, in accordance with Le Chatelier's concept.

The reaction will go forward as the CO concentration rises, eating part of the extra CO and turning it into CO2. This change lowers the excess CO concentration and aids in reestablishing equilibrium.

However, since CO2 is already a product, its concentration does not have a direct impact on the reaction. However, to keep the stoichiometric balance, it can result in a somewhat greater concentration of CO.

Learn more about le chatlier principles at:

https://brainly.com/question/14967447

#SPJ1

The specific equation depends on the isomer and the oxidizing agent used. An example of a general oxidation reaction could be:

C₃H₇OH + [O] → C₃H₆O + H₂O

Common oxidizing agents for organic compounds include potassium permanganate (KMnO₄), potassium dichromate (K₂Cr₂O₇), or hydrogen peroxide (H₂O₂).

Whether or not the product needs to be removed from the reaction vessel depends on the specific reaction and its desired outcome. In some cases, the product may be of interest for further reactions or analysis, and therefore, it would be retained in the reaction vessel.

Learn more about oxidation, here:

https://brainly.com/question/16976470

#SPJ1

The pH of the solution with a [H₃O⁺] concentration of 3.5 * 10^(-3) mol/L is approximately 2.456.

To determine the pH of a solution based on the concentration of H₃O⁺, you can use the equation:

pH = -log[H₃O⁺]

Given that [H₃O⁺] = 3.5 * 10^(-3) mol/L, we can substitute this value into the equation:

pH = -log(3.5 * 10^(-3))

To evaluate this using a calculator or math software:

pH ≈ -log(3.5 * 10^(-3)) ≈ -(-2.456) ≈ 2.456

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

To create 100 mL of solution with a concentration of 1.5 M, 6.00 grams of NaOH are required.

The amount of NaOH needed to make 100. mL of solution with a concentration of 1.5 M can be calculated using the formula:

mass = molarity x volume x molar mass

where:

molarity = 1.5 M (given)

volume = 100. mL = 0.1 L (given)

molar mass of NaOH = 40.00 g/mol (from periodic table)

Substituting the values, we get:

mass = 1.5 mol/L x 0.1 L x 40.00 g/mol

mass = 6.00 g

Therefore, 6.00 grams of NaOH are needed to make 100. mL of solution with a concentration of 1.5 M.

To know more about the Solution, here

https://brainly.com/question/14296204

#SPJ1

(a) Element C (2,8,8) is unlikely to react with the others.

(b) Elements D (2,8,7) and E (2,8,3) will likely react to form covalent compounds.

(c) Elements A (2,8,2) and B (2,8,6) will likely react to form ionic solids.

(a) It has a complete outer electron shell (valence shell) with eight electrons, fulfilling the octet rule. This stable configuration makes element C less likely to undergo chemical reactions and form compounds.

(b) Covalent compounds involve the sharing of electrons between atoms, typically nonmetals. Both D and E have incomplete outer electron shells and can form covalent bonds by sharing electrons with other elements.

(c) Ionic compounds involve the transfer of electrons from one atom to another, typically between metals and nonmetals. When A and B form ionic solids, they will achieve a stable electron configuration by losing or gaining electrons, respectively.

Element A would lose two electrons to achieve a stable configuration, resulting in a valency of +2. Element B would gain two electrons, resulting in a valency of -2.

The weakest bond among ionic, covalent, and hydrogen bonds is the hydrogen bond. Hydrogen bonds are relatively weaker than ionic and covalent bonds. They occur when a hydrogen atom with a partial positive charge interacts with an electronegative atom, such as oxygen or nitrogen, with a partial negative charge.

Hydrogen bonds are important in various biological and chemical processes, but they are weaker compared to the strong bonds formed in ionic and covalent compounds.

For more such questions on covalent compounds.

https://brainly.com/question/27389028

#SPJ11

To prepare 70 mL of zinc sulfate eyedrops APF, you would need the following ingredients:

Zinc sulfate monohydrate: 0.07 g

Chlorobutol aqueous solution: 10.45 mL

Boric acid powder: 0.7 g

Glycol aqueous solution: 0.14 mL

To calculate the amount of each ingredient needed to prepare 70 mL of zinc sulfate eye drops APF, we'll follow these steps:

Step 1: Determine the concentration of zinc sulfate needed. Since the recipe doesn't specify the concentration, we'll assume a standard concentration of 0.1% w/v.

Step 2: Calculate the amount of zinc sulfate required. The desired concentration is 0.1% w/v, and we need to prepare 70 mL of the eye drops. Therefore, the amount of zinc sulfate needed can be calculated as follows:

Amount of zinc sulfate (g) = (Desired concentration (g/100 mL) * Volume (mL))/100

                       = (0.1 * 70)/100

                       = 0.07 g

Step 3: Determine the amounts of other ingredients based on the provided ratios. The chlorobutol solution is at a concentration of 0.67% w/v, so we need to calculate the volume required using the ratio:

Volume of chlorobutol solution (mL) = (Amount of zinc sulfate (g) * 100)/Concentration of chlorobutol (%)

                                  = (0.07 * 100)/0.67

                                  = 10.45 mL

The boric acid powder doesn't specify the concentration, so we'll assume it to be 1% w/v. Using the same logic, we can calculate the amount of boric acid powder required:

Amount of boric acid powder (g) = (Desired concentration (g/100 mL) * Volume (mL))/100

                             = (1 * 70)/100

                             = 0.7 g

Finally, the glycol solution is at a concentration of 50% w/v, so the volume required can be calculated as:

Volume of glycol solution (mL) = (Amount of zinc sulfate (g) * 100)/Concentration of glycol (%)

                            = (0.07 * 100)/50

                            = 0.14 mL

for such more questions on eyedrops

https://brainly.com/question/22086668

#SPJ8

Based on the indicator chart, the pH indicator that would be the best one to use would be Thymol Blue.

The color change would be from light blue to yellow to orange.

Thymol blue would be best because it would show you where your starting point is and then when you reach the desired pH value of 3. 0. Looking at the indicator chart, Thymol blue has a color of light blue between 8. 0 and 9. 0 so you will know you are at 8. 0 when the reaction starts.

As you add more acid, the color would move to yellow to let you know that it is getting more acidic. Once it reaches orange, the titration should stop.

Find out more on pH indicators at https://brainly.com/question/29584301

#SPJ1

Yes, the waxed paper does affect how the light hits the screen. Waxed paper is a translucent material that diffuses light as it passes through.

When light passes through the waxed paper, it scatters in various directions due to the irregularities and texture of the paper's surface. This scattering of light results in a blurry white image on a gray background when the photograph is taken.

Compared to plastic, which is typically more transparent and smooth, waxed paper has a rougher surface and contains wax coatings that further contribute to light scattering. This diffusion of light reduces the sharpness and clarity of the image projected onto the screen.

The scattered light rays create a more diffused and less defined image, leading to a blurry appearance in the photograph.Therefore, the use of waxed paper instead of plastic alters the behavior of light, causing the light to scatter and resulting in a blurry white image on a gray background when projected onto the screen.

For more such questions on light

https://brainly.com/question/10728818

#SPJ11

Answer:

Energy

4p ⇵ ⇵ ⇵

3d ⇵ ⇵ ⇵ ⇵ ⇵

4s ⇵

3p ⇵ ⇵ ⇵

3s ⇵

2p ⇵ ⇵ ⇵

2s ⇵

1s  ⇵

If 3 moles of cl reacts with 3 moles oxygen, there is no limiting reactant or excess reactant because the reactants are in stoichiometric proportions.

To determine the limiting reactant and excess reactant, we need to compare the stoichiometry of the reaction to the given amounts of each reactant.

The balanced chemical equation for the reaction between chlorine (Cl2) and oxygen (O2) can be represented as follows:

2Cl2 + O2 → 2Cl2O

According to the balanced equation, it requires 2 moles of chlorine (Cl2) to react with 1 mole of oxygen (O2) to produce 2 moles of chlorine oxide (Cl2O).

Given that we have 3 moles of chlorine (Cl2) and 3 moles of oxygen (O2), we can determine the limiting reactant by comparing the ratio of moles between the two reactants.

The ratio of Cl2 to O2 required for complete reaction is 2:1. However, since we have equal amounts of Cl2 and O2 (both 3 moles), neither reactant is present in excess.

Therefore, in this scenario, there is no limiting reactant or excess reactant because the reactants are in stoichiometric proportions. All of the chlorine and oxygen will be consumed in the reaction, resulting in the complete conversion to chlorine oxide (Cl2O).

It's important to note that if the amounts of Cl2 and O2 were different, the reactant present in lesser quantity would be the limiting reactant, and the reactant in greater quantity would be the excess reactant.

for more questions on reactant
https://brainly.com/question/30129541

#SPJ11

The energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H is -2.982 x 10⁻¹⁰ J.

The given masses of the isotopes can be converted to kilograms using the conversion factor: 1 u = 1.661 x 10⁻²⁷ kg.

Mass of 4He = 2.55 g = 2.55 x 10⁻³ kg

Mass of 3H = 3.01605 u = 3.01605 x 1.661 x 10⁻²⁷ kg/u

= 5.0099 x 10⁻²⁷ kg

Mass of 1H = 1.00783 u = 1.00783 x 1.661 x 10⁻²⁷ kg/u

= 1.6737 x 10⁻²⁷ kg

The balanced equation for the fusion reaction is;

3H + 1H → 4He

The molar mass of 4He is 4.0026 g/mol, which can be converted to kg/mol using the conversion factor: 1 g/mol = 1 x 10⁻³ kg/mol.

Molar mass of 4He = 4.0026 g/mol = 4.0026 x 10⁻³ kg/mol

The number of moles of 4He formed can be calculated from its mass;

n(4He) = m(4He) / M(4He)

= 2.55 x 10⁻³ kg / 4.0026 x 10⁻³ kg/mol

= 0.638 mol

From the balanced equation, 3 moles of H atoms react with 1 mole of He atoms to form 1 mole of He atoms. Therefore, the number of moles of H atoms required for the reaction is;

n(H) = 3/4 x n(4He)

= 3/4 x 0.638 mol

= 0.479 mol

The energy released in the reaction can be calculated using the mass-energy equivalence equation;

E = Δm c²

where Δm is change in mass, c is the speed of light.

The change in mass is;

Δm = [3H + 1H - 4He] = [5.0099 x 10⁻²⁷ kg + 1.6737 x 10⁻²⁷kg - 4.0026 x 10⁻³ kg]

= -3.315 x 10⁻²⁷ kg (negative because mass is lost in the reaction)

The energy released is;

E = (-3.315 x 10⁻²⁷ kg) c²

= (-3.315 x 10⁻²⁷ kg) (2.998 x 10⁸ m/s)²

= -2.982 x 10⁻¹⁰ J

The negative sign indicates that energy is released in the reaction (exothermic reaction).

Therefore, the energy associated is -2.982 x 10⁻¹⁰ J.

To know more about fusion here

https://brainly.com/question/16556922

#SPJ1

When, the volume of the system was 2.60 L. Then, the total internal energy change is -71.8 kJ.

We can use the first law of thermodynamics to find the total internal energy change;

[tex]Δ_{E}[/tex] = q + w

where q is the heat transferred to or from the system and w is the work done on or by the system. At constant pressure, work done is given by;

w = -P[tex]Δ_{V}[/tex]

where P is pressure and [tex]Δ_{V}[/tex] is change in volume.

Using the given values, we have:

q = -71.8 kJ (since heat is released)

P = 35.0 atm = 3.56×10⁶ Pa (using the conversion factor 1 atm = 101325 Pa)

[tex]Δ_{V}[/tex] = 7.00 L - 2.60 L = 4.40 L = 4.40×10⁻³ m³ (using the conversion factor 1 L = 10⁻³ m³)

Therefore,

w = -P[tex]Δ_{V}[/tex]= -(3.56×10⁶ Pa)(4.40×10⁻³ m³) = -15.7 J

= -1.57×10⁻² kJ

Thus, the total internal energy change is;

[tex]Δ_{E}[/tex] = q + w = (-71.8 kJ) + (-1.57×10⁻² kJ)

= -71.8 kJ - 1.57×10⁻² kJ

= -71.8 kJ

Therefore, the total internal energy change is -71.8 kJ.

To know more about first law of thermodynamics here

https://brainly.com/question/1604031

#SPJ1

The temperature of the oxygen gas sample is 609 K, which is approximately 336°C or 637°F. The answer is A.

We can use the ideal gas law equation, PV = nRT, to solve for the temperature of the oxygen gas sample.

First, we need to calculate the number of moles of oxygen gas present in the sample using its mass and molar mass:

n = m/M

where:

n = number of moles

m = mass (in grams)

M = molar mass (in g/mol)

The molar mass of oxygen gas (O2) is 32.00 g/mol.

n = 48 g / 32.00 g/mol = 1.50 mol

Next, we can rearrange the ideal gas law equation to solve for temperature (T):

T = (PV) / (nR)

where:

T = temperature (in Kelvin)

P = pressure (in atm)

V = volume (in liters)

n = number of moles

R = gas constant (0.0821 L atm/mol K)

Plugging in the given values, we get:

T = (3.0 atm x 25 L) / (1.50 mol x 0.0821 L atm/mol K)

T = 609 K

For more question on temperature click on

https://brainly.com/question/4735135

#SPJ11

0.238 moles of NaN₃ are produced from 9.98 grams of N₂.

The moles of he mass of NaN₃ produced

The balanced equation for the reaction is:

2 NaN₃ → 2 Na + 3 N₂

The molar ratio between NaN₃ and N₂ is 2:3, which means that for every 2 moles of NaN₃, 3 moles of N₂ are produced.

The mole ratio is used to determine how many moles of NaN₃ are produced from 9.98 grams of N₂.

First, we need to convert the mass of N₂ to moles:

moles of N₂ = mass of N2 / molar mass of N₂

moles of N₂ = 9.98 g / 28.02 g/mol

moles of N₂ = 0.356 mol

moles of NaN₃ = (2/3) * moles of N₂

moles of NaN₃ = (2/3) * 0.356 mol

moles of NaN₃ = 0.238 mol

Learn more about mass at: https://brainly.com/question/16934894

#SPJ1

The law of conservation of mass states that in a chemical reaction, the total mass of the reactants is equal to the total mass of the products. An experiment involving the thermal decomposition of calcium carbonate ([tex]CaCO_3[/tex]) can provide evidence for this law.

Method:

A sample of calcium carbonate is heated strongly in a crucible or test tube, causing it to decompose into calcium oxide (CaO) and carbon dioxide ([tex]CO_2[/tex]) gases. The reaction can be represented by the following chemical equation:

[tex]CaCO_3(s) = CaO(s) + CO_2(g)[/tex]

Measurements:

The mass of the empty crucible or test tube is first measured and recorded. A known mass of calcium carbonate is added to the crucible or test tube, and the combined mass is measured and recorded. The crucible or test tube containing the calcium carbonate is then heated strongly, and the mass of the products (calcium oxide and carbon dioxide) is measured and recorded.

Evidence for conservation of mass:

If the law of conservation of mass is true, the total mass of the products should be equal to the total mass of the reactants. In this experiment, the mass of the calcium oxide and carbon dioxide produced should add up to the mass of the calcium carbonate that was originally used.

To show evidence for the conservation of mass, the student could calculate the mass of the products by subtracting the mass of the empty crucible or test tube and the mass of the remaining calcium oxide (if any) from the combined mass of the crucible or test tube and the calcium carbonate.

If the calculated mass of the products is equal to the mass of the reactants, then the law of conservation of mass has been demonstrated.

For more question on  click on

https://brainly.com/question/24783543

#SPJ11

The masses, moles, and number of molecules are as follows:

1. c. 1.4 x 10²⁴

2. b. 4.214 x 10²³ molecules

3. a. 1.2 x 10²²

4. a. 5.9 x 10²³

5. c. 8.0 x 10²³

6. d. 185.3 grams.

7.  a. 23.7 grams

8. c. 127.3 grams

9. No answer in the option

10. a. 2.9 grams

To determine the number of molecules in 265 grams of FeF₃:

First, calculate the number of moles of FeF₃:

moles = mass / molar mass

moles = 265 g / 139.839 g/mol

moles = 1.8939 mol

number of molecules = moles * Avogadro's number

number of molecules = 1.8939 mol * 6.022 x 10²³ molecules/mol

number of molecules = 1.138 x 10²⁴ molecules

2. To determine the number of molecules in 98 grams of FeF₃:

moles = 98 g / 139.839 g/mol = 0.7001 mol

number of molecules = 0.7001 mol * 6.022 x 10²³ molecules/mol

number of molecules = 4.214 x 10²³ molecules

3. To determine the number of atoms in 6.2 grams of silver:

moles = 6.2 g / 107.8682 g/mol = 0.0574 mol

number of atoms = 0.0574 mol * 6.022 x 10²³ atoms/mol

number of atoms = 3.457 x 10²² atoms

4. To determine the number of atoms in 54.2 grams of Manganese:

moles = 54.2 g / 54.938045 g/mol = 0.9876 mol

number of atoms = 0.9876 mol * 6.022 x 10²³ atoms/mol

number of atoms = 5.947 x 10²³ atoms

5. To determine the number of molecules in 250 grams of Cu(NO₃)₂:

moles = 250 g / (63.546 g/mol + 2 * 14.007 g/mol + 6 * 16.00 g/mol) = 250 g / 187.56 g/mol = 1.333 mol

number of molecules = 1.333 mol * 6.022 x 10^23 molecules/mol

number of molecules = 8.027 x 10^23 molecules

6. To determine the mass in grams of 6.2 x 10²⁴ molecules of water:

moles = (6.2 x 10²⁴ molecules) / (6.022 x 10²³ molecules/mol)

moles = 10.29 mol

mass = moles * molar mass

mass = 10.29 mol * 18.00 g/mol)

mass = 185.3 grams

7. To determine the mass in grams of 2.3 x 10²³ molecules of NO₃:

moles = (2.3 x 10²³ molecules) / (6.022 x 10²³ molecules/mol)

moles = 0.382 mol

mass = moles * molar mass

mass = 0.382 mol * (14.007 g/mol + 3 * 16.00 g/mol) = 23.7 grams

8. To determine the mass in grams of 9.7 x 10²³ atoms of selenium:

moles = (9.7 x 10²³ atoms) / (6.022 x 10²³ atoms/mol)

moles = 1.61 mol

mass = moles * molar mass

mass = 1.61 mol * 78.9718 g/mol = 127.3 grams

9. To determine the mass in grams of 3.4 x 10²⁴ atoms of osmium:

moles = (3.4 x 10²⁴ atoms) / (6.022 x 10²³ atoms/mol)

moles = 5.64 mol

mass = moles * molar mass

mass = 5.64 mol * 190.23 g/mol

mass = 1074.8 grams

10. To determine the mass in grams of 11 x 10²² molecules of oxygen:

moles = (11 x 10^22 molecules) / (6.022 x 10²³ molecules/mol)

moles = 0.182 mol

mass = moles * molar mass

mass = 0.182 mol * 16.00 g/mol

mass = 2.9 grams

Learn more about the number of molecules at: https://brainly.com/question/30193523

#SPJ1

Alleles and traits related as D. Alleles are distinct versions of genes, and they code for traits, which are distinct forms of characteristics.

Alleles and traits are closely related in terms of genetics and inheritance. Alleles are alternative forms of a gene that occupy the same locus on a chromosome. They represent different variations of a specific gene. Traits, on the other hand, are the observable characteristics or features of an organism that are determined by the combination of alleles.

Each individual inherits two alleles for a particular gene, one from each parent. These alleles can be the same (homozygous) or different (heterozygous). The combination of alleles determines the expression of traits in an organism. For example, in the case of eye color, the gene may have alleles for blue and brown eye color. An individual may inherit two blue alleles (homozygous), resulting in the trait of blue eyes, or they may inherit one blue and one brown allele (heterozygous), resulting in the trait of brown eyes. In summary, alleles are distinct versions of genes, and they code for the different variations of traits or characteristics that are observed in organisms. The correct answer is D. Alleles are distinct versions of genes, and they code for traits, which are distinct forms of characteristics.

for more questions on Alleles
https://brainly.com/question/16684263
#SPJ11

Answer: the temperature would increase

Explanation:

because if one spot on the earth got the same amount of light through the summer and winter it would have a severe amount of drought and nothing to cool it down since all off it evaperated

Answer:

Protons - 11

Neutrons - 12

Electrons - 11

Step-by-step:

An atom of sodium-23 (Na-23) has a net charge of 0 because it is a neutral atom.

To determine the number of protons, neutrons, and electrons in Na-23, we can use its atomic number and mass number. The atomic number of sodium is 11, which means that a neutral sodium atom has 11 protons in its nucleus. The mass number of Na-23 is 23, which means that its nucleus contains 23 particles (protons and neutrons) in total.

To find the number of neutrons in Na-23, we can subtract the number of protons (which is 11) from the mass number (which is 23). Therefore, Na-23 has 23 - 11 = 12 neutrons.

Since Na-23 is a neutral atom, the number of electrons must also be 11. This is because in a neutral atom, the number of electrons is equal to the number of protons.

So to summarize, the number of protons, neutrons, and electrons in Na-23 are 11, 12, and 11, respectively. We determined the number of protons and electrons from the atomic number of sodium (which is 11), and the number of neutrons from the difference between the mass number (which is 23) and the atomic number (which is also 11).

Hope this helps!

The orbital diagram of the compound has been shown in the  image attached.

The configuration of the molecular orbitals (MOs) within a molecule is shown in an orbital diagram of the molecule. Atomic orbitals from different molecules' individual atoms overlap to create molecular orbitals. According to the rules of quantum physics, electrons can fill these molecular orbitals.

Each chemical orbital is depicted in an orbital diagram by a line or a box, and the electrons are shown as arrows. The arrow's direction—upward for "spin up" and downward for "spin down"—indicates the spin of the electron.

Learn more about orbital diagram:https://brainly.com/question/14487703

#SPJ1

Answer:

[tex]C_{2}H_{2}S[/tex]