Keep your foot on the brakes until you've cleared the object if you want to avoid driving over it, such a mattress or plank. Traffic congestion is a major cause of collisions.
What is an engine stalls?It is frequently used to describe the situation where an engine abruptly stops running and spinning. It could occur as a result of inadequate fuel, air, energy, or electric spark, fuel hunger, a mechanical issue, or in response to an unexpected rise in engine load. The partial breakdown of airflow through an engine is referred to as stall. It is a gradual condition that might result in surge, which is the complete cessation of airflow through the engine. Surge can, in rare circumstances, cause the airflow direction to change. The stall is caused by the breakdown of the steady airflow over the wing into a turbulent one, which lowers lift. The lift can no longer carry the weight of the aircraft to its maximum capacity, and the aircraft sinks.To learn more about engine stalls refer to:
https://brainly.com/question/17405296
#SPJ4
placing tools and equipment where thery can be reached with minimal strain is a characteristic of a mssc. True or false?
Shear stain is typically stated in radians; however, it can alternatively be expressed in degree. Strain is a unit less quantity.
Because the strain lacks the enzyme or enzymes required to generate substance A, Neurospora cannot thrive on minimum medium. Neurospora of the wild kind can also grow in simple media. Inorganic salts and carbon sources make up the bare minimum media. Some enzymes in the pathway that are not functional prevent neurospora from growing, which affects their growth. Because Neurospora is haploid and expresses all alleles, it is very helpful in genetic investigations. The entire genome of the neurospora has seven sequenced chromosomes. There is always a chance that cyber concerns will be abused by hackers. Users should avoid using the same password on many websites and should first keep their passwords private.
Learn more about Neurospora here:
https://brainly.com/question/29376154
#SPJ4
why is the starting torque per a of starting current of a wound—rotor motor higher than that of a squirrel—cage motor although the starting current is less?
The starting torque per ampere of starting current of a wound-rotor motor is higher than that of a squirrel-cage motor because the wound-rotor motor has a higher rotor resistance than the squirrel-cage motor.
What is torque
Torque is the measure of a force that causes rotation or turning motion. It is equal to the amount of force applied multiplied by the length of the lever arm that is used to create the turning force. When a force is applied to an object that is positioned some distance away from the axis of rotation, the force creates a turning motion. This motion is known as torque and it is expressed in units of force multiplied by distance, such as Newton-meters (Nm).
To know more about torque
https://brainly.com/question/25708791
#SPJ4
How do you find the enthalpy of solution of ammonium chloride?
Ammonium chloride, NH4Cl, dissolves at a molar enthalpy of 15 KJ/mol.
What is enthalpy of solution of ammonium chloride?Ammonium chloride, NH4Cl, dissolves at a molar enthalpy of 15 KJ/mol. That is to say, 15 KJ of heat energy would be absorbed by 1 mole of NH4Cl dissolving in water. A thermodynamic system's internal energy and the product of its pressure and volume are added to form enthalpy, which is one of the system's properties. It is a state function that is frequently used to monitor chemical, biological, and physical systems at a constant pressure that is conveniently given by the sizable surrounding environment. Enthalpy Meaning. Here is what enthalpy is: H = E + PV. The internal energy, pressure, and volume are added to determine enthalpy./2 N2(g) + 2 H2(g) + 1/2 Cl2(g) --> NH4Cl(s) ∆H = -314.43 kJ/mol.And according to my CRC Handbook of Chemistry and Physics (62nd Edition), the enthalpy of solution for NH4Cl is 3533 cal/mol, or 14.78 kJ/mol.NH4Cl(s) --> NH4^+1(aq) + Cl^-1(aq) ∆H = +14.78 kJ/molTo learn more about enthalpy refer to:
https://brainly.com/question/14047927
#SPJ4
which is easier to break crayon or pencil A. Crayon B. Pencil C. There is no difference
There is no difference to break crayon or pencil.
Hence, the correct answer is option C.
The majority of pencil cores are produced from a mixture of graphite powder and clay binder. Graphite pencils, also referred to as "lead pencils," leave behind grey or black traces that can be quickly erased but are otherwise resistant to moisture, the majority of chemicals, ultraviolet light, and aging from the environment. For drawing and sketching, other types of pencil cores, such those made of charcoal, are typically utilized.
Crayons are available in a range of prices, and are easy to work with. They are less messy than most paints and markers, blunt (removing the risk of sharp points present when using a pencil or pen), typically non-toxic, and available in a wide variety of colors. These characteristics make them particularly good instruments for teaching small children to draw in addition to being used widely by student and professional artists.
To know more about crayon here:
https://brainly.com/question/14984362
#SPJ4
A preure veel with a contant volume of V, and contant temperature of T, i being filled with a ga tream. The tank i initially filled with N mole of the ga. The change in the number of mole of ga in the veel i a function of the difference in the inlet preure and alo the tank preure, a follow:
Where N₁ and N₂ are the number of mole of ga at the inlet and tank preure, respectively, P₁ and P₂ are the inlet and tank preure, V is the volume of the tank, R is the univeral ga conant and T i the temperture of the ga in the tank.
[tex]N_2 - N_1 = V (P_1 - P_2) / (RT)[/tex]The equation provided above describes the change in the number of moles of gas in a vessel of constant volume and temperature.
This equation states that the difference between the number of moles of gas at the inlet and the tank pressure is proportional to the difference in the inlet pressure and tank pressure, and also inversely proportional to the temperature and the universal gas constant.
This equation allows us to calculate how much gas is present in a vessel at a given pressure and temperature. This equation also allows us to understand how much gas is added or removed from the vessel depending on the inlet and tank pressure.
Learn more about Number of mole: https://brainly.com/question/29242554
#SPJ4
What is Field Research: Definition, Methods, Examples and ...
Answer:
Field research is a type of qualitative research that involves gathering data through direct observations and interactions with people in their natural settings. It involves studying how people act, behave, and interact in their environment. Field research is used to understand how people interact with their environment, how they make decisions, and how they live their everyday lives. Field research methods can include interviews, surveys, observations, and even surveys conducted over the internet. Examples of field research include studies of the interactions between people and their environment, such as studies of how people use public spaces, or studies of how people interact in their homes.
what is asme code for shaft design?
For the creation and production of mechanical components, including shafts, the American Society of Mechanical Engineers (ASME) offers standards and guidelines.
What do you understand by the term ASME?The ASME B107.1 "Standard for Socket Cap, Shoulder, Set, and Butt Screws (Inch Series)" code, which offers guidelines for the design and manufacture of shafts used with socket head screws, is one of the commonly used codes for shaft design.
The ASME B31.1 "Power Piping Code," which offers standards for the design and execution of piping systems used to transfer power, is another frequently used ASME code for shaft design.
The specific ASME code that is suited for a given application will rely on the needs and specifications of the that specific project. It is crucial to note that these are only two instances of ASME codes that can be used for shaft design.
To know more about code visit:-
https://brainly.com/question/2094784
#SPJ4
ultium platform-based vehicles can be configured with as many as three electric motors. when two motors are combined, what is the rated horsepower?
The rated horsepower of two combined electric motors on a Sultium platform-based vehicle is up to 160 hp.
Sultium platform-based vehicles offer a range of electric motor configurations, from single motors to as many as three motors. When two electric motors are combined, the rated horsepower is up to 160 hp. This provides a significant boost in power and performance for the vehicle, allowing for faster acceleration, increased torque, and improved overall handling. With this increased power, the vehicle is able to reach higher top speeds, with a maximum speed of up to 250 km/h, making it suitable for both highway and off-road use. The two combined electric motors also provide greater efficiency than a single motor, helping to reduce emissions while still providing an impressive amount of power.
Learn more about horsepower: https://brainly.com/question/29611111
#SPJ4
1. what are the winding grooves which help a bullet maintain a stable trajectory called? quizlet
The winding grooves which help a bullet maintain a stable trajectory are called rifling.
How bullet stables its trajectory?
A bullet stabilizes its trajectory through the use of rifling, which are helical grooves in the barrel of a firearm. These grooves cause the bullet to spin as it travels through the air, much like a football does when it is thrown.
The spinning of the bullet creates gyroscopic stability, which helps to maintain its trajectory and resist any forces that would cause it to deviate from its path.
Additionally, the rifling imparts spin-stabilized flight, which helps to counteract the effects of wind and gravity and increases accuracy over long distances. Overall, the combination of rifling and the spinning of the bullet helps to ensure a stable and accurate trajectory.
To learn more about trajectory, visit: https://brainly.com/question/13262536
#SPJ4
what is the maximum allowable distance for horizontal cabling?
There must only be 76 meters of horizontal space at most (250 feet).
What is meant by horizontal cabling?Horizontal cabling runs from a telecommunications room or enclosure to each workstation outlet or work area outlet (WAO). It is often placed in a star topology that connects each workspace to the communications room. The cables can be kept separate and secured using the horizontal option inside the rack. While moving up or down out of the server rack itself, the vertical will hold everything in place. It's crucial to develop a successful cable management solution for your data center. The places that they cover are where there are the most differences. Backbone cabling typically links your building's entrance amenities, equipment rooms, and other areas. Conversely, outlets and individual workstations will be covered by horizontal cabling on each floor of the structure.To learn more about horizontal cabling refer to:
https://brainly.com/question/14773643
#SPJ4
The top of a ladder weighing 20kg and 6m long rests against a vertical wall and the foot of the ladder on a horizontal floor. For the wall, f=0.15, and for the floor f=0.20. How far up the ladder can a man weighing 60kg go before the ladder begins to slip?
The ladder distance a man weighing 60kg go before the ladder begins to slip is 2.973m.
What is friction?
The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.
There are various kinds of friction: Two solid surfaces in touch are opposed to one another's relative lateral motion by dry friction.
Here, it is given that:
Weight of man = 20kg
[tex]N_1=f_aMg\\N_2=f_bMg[/tex]
Momentum = 0
So,
[tex]N_1-N_2=-WgX[/tex]
[tex](f_a-f_b)20=-60X[/tex]tanФ
(0.15 - 0.02)20 = -60X x 3/5
x = 1/36
x = 0.027
Now, the distance will be 3 - x = 2.973m.
Thus, the answer is 2.973m.
For more details regarding friction, visit:
https://brainly.com/question/28356847
#SPJ1
why is it important to understand kernel module dependencies
Because you can use them to designate which modules can be loaded before or after a module is asked to be loaded, it is crucial to understand kernel dependencies.
Some kernel modules require the loading of other modules before they may be loaded, which is known as a module dependency. Before loading the requested module, the command looks for these dependencies and loads the dependent modules. Consider the command. Kernel modules are bits of code that the kernel can load and unload as needed. They increase the kernel capabilities without requiring a system reset. A module can be set to be loadable or built-in.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
If an EDM instrument has a purported accuracy capability of ±(1.5 mm + 2ppm) what error can be expected in a 25 ft measured distances (assume that the instrument and target mis-centering errors are equal to zero).
If an EDM instrument has a purported accuracy capability of ±(1.5 mm + 2ppm) error can ±1.50 mm.
What is EDM instrument?A surveying tool used to measure distance electronically between two sites using electromagnetic waves is an electronic distance measurement device.
EDM instruments are extremely dependable and practical surveying tools that can measure distances up to 100 kilometres.
Here, it is given that:
Accuracy capacity = ±(1.5 mm + 2ppm)
Measured distance = 25 m
[tex]E_i = E_r=0[/tex]
[tex]E_d=\sqrt{0^2+0^2+(1.5)^2+2PpmX[\frac{10^-^6}{Ppm}X25X\frac{10^3mm}{m} ]^2 }[/tex]
[tex]E_d=\sqrt{2.25+(2X10^-^6X25X10^3)^2}[/tex]
[tex]E_d= 1.50 mm.[/tex]
Thus, the answer is ±1.50 mm.
For more details regarding EDM instrument, visit:
https://brainly.com/question/15452991
#SPJ1
given a file a that is 21 bytes in length, how many other 21-byte files will produce the same sha-1 hash as a
Answer:
255
Explanation:
You want to know the number of other 21-byte files that can have the same sha-1 hash code as a given file.
SHA-1 hashThe SHA-1 hash algorithm produces a 20-byte message digest for its input. That is, there can be 2^160 possible different digests.
There can be 2^(21·8) = 2^168 possible different 21-byte files, so any given hash code may be repeated for (2^168)/(2^160) = 2^8 different files.
2^8 -1 = 255 other files may have the same SHA-1 hash.
__
Additional comment
If there is some regularity in the file structure that prevents the hash codes from being uniformly distributed, then the number of files with the same digest may well exceed 256.
Given a file a that is 21 bytes in length, SHA-1 or SHA256 other 21-byte files will produce the same sha-1 hash.
What is Hash Function?
Any function that may be used to map data of any size to fixed-size values is referred to be a hash function, while some haveh functions also enable variable length output. Hash values, hash codes, digests, or just hashes are the names given to the results of a hash function.
The SHA-1 hash function generates a 160-bit hash value from an input. Since the number of possible inputs is significantly larger than the number of possible 160-bit hash values, there can be multiple inputs that produce the same hash value, known as a hash collision.
The exact number of 21-byte files that will produce the same SHA-1 hash as a is unknown and depends on the specific input and the properties of the SHA-1 hash function. However, it is widely believed that collisions can be found for SHA-1 with a practical effort, so it is generally not considered secure for cryptographic purposes.
In short, if MD5 isn't strong enough to prevent collisions, use a stronger hash. If the stronger hashes are too slow, use a fast hash with a low chance of collisions, like MD5. Then, to further lower the likelihood of a collision, use a slower hash, like SHA-1 or SHA256. However, if SHA256 is quick enough and the doubled space isn't an issue, you should probably use SHA256.
Learn more about hash function click here:
https://brainly.com/question/14288937
#SPJ4
Which of the following types of relationships can a relational database not define?
Group of answer choices
one-to-many
zero-to-many
one-to-one
many-to-many
zero-to-many types of relationships can a relational database not define.
Understanding the many kinds of database relations is one of the most crucial aspects of databases. That refers to both the process of creating a database model and the analysis of your data. Understanding these relationships is somewhat simple and natural, yet it is nonetheless crucial for database theory.
kinds of relationships
In the database, there are 3 different kinds of relations:
Many-to-Many, One-to-One, and One-to-Many
Despite their differences, they are (nearly) identically represented in databases, and that is the line separating the two tables. What then is different? We will go over each of these relationship kinds individually and comment on what each one's true goal is.
To know more about database :
https://brainly.com/question/25198459
#SPJ4
Consider the following correct implementation of the selection sort algorithm.
public static void selectionSort(int[] elements)
{
for (int j = 0; j < elements.length - 1; j++)
{
int minIndex = j;
for (int k = j + 1; k < elements.length; k++)
{
if (elements[k] < elements[minIndex])
{
minIndex = k;
}
}
if (j != minIndex)
{
int temp = elements[j];
elements[j] = elements[minIndex];
elements[minIndex] = temp; // Line 19
}
}
}
The following declaration and method call appear in a method in the same class as selectionSort.
int[] arr = {9, 8, 7, 6, 5};
selectionSort(arr);
How many times is the statement elements[minIndex] = temp; in line 19 of the method executed as a result of the call to selectionSort ?
The following can be used to replace / missing code / so that the statement works as intended.:
ArrayList<Thing> a = / missing code /;
the following can be used to replace / missing code / so that the statement works as intended.
What is a code?Coding is necessary for the proper operation of electronic devices like smartphones, laptops, and tablets. Humans can communicate with these gadgets thanks to coding. Internal coding systems are used by modern technology including traffic lights, calculators, smart TVs, and automobiles.
Coding serves as a translator because computers cannot communicate in the same ways that people do. Code translates user input into computer-understandable numerical sequences. When computers receive these messages, they carry out the tasks they have been given, like centering an image or changing the font colours.
Computer programming languages, created through a series of numerical or alphabetic codes, tell machines how to carry out particular tasks. Computer coding works similarly to a manual. A programmer or developer writes instructions outlining the data and tasks required to produce a visual or carry out a task.
To know more about code, click the link given below:
https://brainly.com/question/497311
#SPJ4
if ln(odds) of an event is 0, what is the probability of that event?
This is because the natural logarithm of 1, which is the odds of an event that has a probability of 0.5, is 0. Therefore, if the natural logarithm (ln) of an event is 0, then the probability of that event must be 0.5.
What is the logarithm ?
Logarithms are a type of mathematical function that take a number (called the argument) and return a value that is the result of a calculation. For example, the logarithm of 100 is 2, because 10 to the power of 2 (10^2) is 100. In other words, the logarithm of a given number is the exponent that is used to raise the base number (usually 10 or e) to get the given number. Logarithms are often used in calculus and other mathematical fields to simplify calculations.
To learn more about logarithm
https://brainly.com/question/17169621
#SPJ4
Which event type should you use when you want an input widget to trigger a microflow when it changes from 'no selection' to a specific selection?A. On ChangeB. On LeaveC. On SelectionD. On Start
The event type you use when you want an input widget to trigger a microflow when it changes from 'no selection' to a specific selection A: "On Change".
What is the event type about?In Mendix, "On Change" events are used to trigger a microflow when the value of an input widget changes. For example, if you have a dropdown list widget and you want to perform some action when the user selects an item from the list, you can set the "On Change" event for the widget.
Therefore, "On Change" event triggers a microflow when the input widget changes from one value to another. In this case, when the input widget changes from "no selection" to a specific selection, the "On Change" event will trigger the microflow.
Learn more about event type from
https://brainly.com/question/30407771
#SPJ1
Observe the following recurrences, use master theorem to solve those that can be solved(Please indicate which case). For those that cannot be solved directly, try to devise some guess of the solution, and then use substitution method to prove your guess.
a) T(n)=4T(n/3)+nlgn.
b) T(n)=4T(n/2)+n^2 √n.
c) T(n)=T(n/2)+T(n/4)+T(n/8)+n.
The Master Theorem is a tool used to solve recurrence relations, which are mathematical expressions that describe the run time of a recursive algorithm in terms of its input size. The theorem provides three cases, each of which corresponds to a different type of relationship between the size of the input and the run time of the algorithm.
a) T(n) = 4T(n/3) + nlogn. This recurrence can be solved by case 2 of the Master Theorem, where T(n) = O(nlog^k n) for some constant k. Here, the dominant term is nlogn and the power of log is 1, so k = 1. Thus, the solution is T(n) = O(nlogn).
b) T(n) = 4T(n/2) + n^2√n. This recurrence cannot be directly solved by the Master Theorem. However, a guess of the solution could be T(n) = O(n^(5/2)). By substitution method, it can be proven that T(n) = O(n^(5/2)).
c) T(n) = T(n/2) + T(n/4) + T(n/8) + n. This recurrence can be solved by case 3 of the Master Theorem, where T(n) = O(n^log_b a). Here, the dominant term is n, the size of the subproblems is halved at each step (b = 2), and the work done at each step is a constant (a = 1). Thus, log_2 1 = 0 and the solution is T(n) = O(n).
In conclusion, the Master Theorem is a powerful tool for solving recurrence relations, but it is not always applicable. In some cases, a guess and proof method is needed to find the solution.
To know more about recurrence relations: https://brainly.com/question/9521757
#SPJ4
1. what are the commonly used framing members commonly used in light frame construction?
The commonly used framing members commonly used in light frame construction are Studs,Joists,Beams,Lintels,Plywood Sheathing,Trusses, Headers,Sills,Blocking,Columns.
What is the construction ?
Construction is the process of creating structures, buildings and infrastructure. It is a process that involves planning, designing, and constructing physical structures such as roads, bridges, and buildings. Construction also includes the renovation and improvement of existing structures. Construction is generally divided into two categories: residential and commercial. Residential construction involves building homes and other dwellings, while commercial construction involves building businesses, office buildings, and recreational facilities. Construction requires a large amount of resources and planning in order to be successful. This includes obtaining permits, researching materials, finding the right contractors, and ensuring the construction site is safe. Construction is a complex and highly regulated process that requires the expertise of many different professionals.
To learn more about construction
https://brainly.com/question/17169621
#SPJ4
you have a single class c ip address and a point-to-point serial link that you want to implement vlsm on. which subnet mask is the most efficient for this point to point link?
When implementing Variable Length Subnet Masking (VLSM) on a point-to-point serial link, it is most efficient to use a subnet mask of /30.
What is Variable Length Subnet Masking?
Variable Length Subnet Masking (VLSM) is a technique used in computer networking to divide a single IP address space into multiple subnets of varying sizes, each with its own subnet mask. The purpose of VLSM is to conserve address space and improve the utilization of IP addresses.
A Class C IP address has a default subnet mask of /24, which provides 256 total IP addresses. When implementing VLSM, the goal is to conserve address space while still providing enough IP addresses to meet the needs of the network. By using a /30 subnet mask, we are able to maximize the use of available address space while still providing enough IP addresses for the point-to-point link.
To summarize, when implementing VLSM on a point-to-point serial link, it is most efficient to use a /30 subnet mask, which provides two usable IP addresses for each subnet, exactly what is needed for a point-to-point serial link.
To learn more about VLSM:
https://brainly.com/question/23291555
#SPJ4
Suppose we have to do production for 3 months with 100, 200, 250 units in January. February, march month respectively The labour cost per unit is 2, 25 and 2 Rs in January February march month Find average labour cost incurred per month in manpower budget
Suppose we have to do production for 3 months with 100, 200, 250 units in January. February, march month respectively The labour cost per unit is 2, 25 and 2 Rs in January February march month Find average labour cost incurred per month in manpower budget
The average labour cost incurred per month in manpower budget is 12.69 Rs.
What is budget?Budgeting is the process of creating a plan to spend your money. This spending plan is called a budget. Creating a budget allows you to determine in advance whether you will have enough money to do the things you need to do or would like to do.
Average labour cost incurred per month in manpower budget = (100 x 2 + 200 x 25 + 250 x 2) / (100 + 200 + 250)
= (200 + 5000 + 500) / (450)
= 5711 / 450
= 12.69 Rs.
Therefore, the average labour cost incurred per month in manpower budget is 12.69 Rs.
To learn more about budget
https://brainly.com/question/29611383
#SPJ1
order the following functions by growth rate: n, √n, n1.5, n2, nlogn, n log log n, n log2 n, n log(n2), 2/n, 2n, 2n/2, 37, n2 log n, n3. indicate which functions grow at the same rate.
n, √n, 2/n, 2n/2, 37, 2n < n1.5 < n2 < nlogn < n log2 n < n log(n2) < n log log n < n2 log n < n3
Functions that grow at the same rate: n, √n, 2/n, 2n/2, and 37
What is function
In programming, a function is a block of code that performs a specific task. It is often used to perform a task based on given parameters, and can be reused multiple times. Functions are essential components of programming, and can be found in many different programming languages.
When a function is not functioning properly, it may not be producing the desired output or might be producing incorrect results. This could be due to a number of factors, such as incorrect syntax, a logical error in the code, or a bug in the code. In order to fix the issue, it is important to identify what is causing the malfunction and make any necessary changes to the code.
To know more about function
https://brainly.com/question/28945272
#SPJ4
a. kmods
b. modinfo
c. mod_info
d. modules
When processing a module, the computer leaps to it, runs its instructions, and then moves on to the next executable command.
The program jumps to the module, runs its instructions, and then moves on to the following executable instruction. The term "software development life cycle" (SDLC) refers to a strategic technique or process that outlines the essential processes or phases for designing and putting into practice high-quality software applications. One or more repetitive functions can be found in a module, which is a discrete software component or unit of a hardware program (tasks Through a programming interface, a module can be utilized in a variety of software programs or computer systems since it is portable. Additionally, they are interoperable since they typically work with different parts of a system or software application.
Learn more about Strategic technique here:
https://brainly.com/question/21852411
#SPJ4
2.13 LAB: Count characters Write a program whose input is a string which contains a character and a phrase, and whose output indicates the number of times the character appears in the phrase. Ex: If the input is: n Monday the output is: Ex: If the input is: z Today is Monday the output is: 0 Ex: If the input is: n It's a sunny day the output is: 2 Case matters. Ex: If the input is: n Nobody the output is: 0 n is different than N. 2477/2.1898342.cx32997 LAB ACTIVITY 2.13.1: LAB: Count characters 0/10 main.py
A string is normally regarded as a type of data and is frequently implemented as an array data structure made up of bytes (or words) that stores a series of components, usually characters, using a character encoding.
What is string?A string is normally regarded as a type of data and is frequently implemented as an array data structure made up of bytes (or words) that stores a series of components, usually characters, using a character encoding. Other data types and structures that use sequences (or lists) of items can also be referred to as string. Traditionally, a string in computer programming is a collection of characters that can be either a literal constant or a type of variable. The latter can either have fixed length and allow for element mutations (after creation). Text and character data are stored in strings. Consider the string of characters that make up "Hello World." C lacks a String type that would make it simple to generate string variables, unlike many other programming languages.user_string=input(str())
character=user_string[0]
phrase=user_string[1]
count=0
for i in phrase:
if i == character:
count = count+1
if count!= 1:
print(str(count) + " " + character + "'s")
else:
print(str(count) + " " + character)
To learn more about string refer to:
https://brainly.com/question/25324400
#SPJ4
FILL IN THE BLANK. the ___ is an efficient method to mount, power, and organize electrical motor control, automation, and power distribution systems.
The Motor Control Center is an efficient method to mount, power, and organize electrical motor control, automation, and power distribution systems.
What is a Motor Control Center?A motor control center (MCC) is a structure used to centrally regulate some or all electric motors.
It is made up of numerous covered parts connected by a common power bus, each of which has a combination starter that includes a motor starter, fuses or circuit breakers, and a power disconnect.
Therefore, an effective way to mount, power, and manage electrical motor control, automation, and power distribution systems is to use a motor control center.
To learn more about Motor Control Center, refer to the link:
https://brainly.com/question/28295968
#SPJ1
) a model airplane flies at 49.9 mi/hr in level flight against a drag force of 1.65 lbf. how much power is required to maintain the plane in flight? express your answer in hp
The power required to maintain the plane in flight is 120 ft/sec.
How to calculate the valueFrom the information, the model airplane flies at 49.9 mi/hr in level flight against a drag force of 1.65 lbf and we.eant to know the power that is required to maintain the plane in flight
Velocity will be:
= 49.9 × 1.4667
= 73.18 ft/sec
The force is given as 1.65
Therefore power will be:
= Force × Velocity
= 1.65 × 73.18
= 120 ft/sec
Learn more about power on:
brainly.com/question/1634438
#SPJ1
what action should you take if you encounter any object waved violently by anyone on or near the tracks? conductor
You should promptly notify the constructor and take any required safety precautions to protect yourself if you come across any object being violently waved by anyone on or near the tracks.
Take action right away if you see anything being violently waved by someone on or near the tracks. The train's conductor needs to be informed right away. The conductor will be able to evaluate the circumstance and take whatever safety measures are required. Take safety steps as well in order to safeguard yourself. Moving away from the object, remaining vigilant and aware of your surroundings, and avoiding making eye contact with the person waving the object are some examples of how to do this. It's critical to keep in mind that safety comes first, and any threats should be treated seriously. You may contribute to ensuring both your own safety and the safety of others around you by acting quickly and alerting the constructor .
Learn more about constructor here:
brainly.com/question/17347341
#SPJ4
three resistors are connected in parallel across a 40 V source. The values of the resistors are 620 ohms, 750 ohms, and 820 ohms. Show your work for each..(a) What should the total sourrce current be?(b) If the measured current was 118 mA, what fault could account for this
Answer:
(a) about 166.6 mA
(b) there is no current through the 820 Ω resistor
Explanation:
You want to know the total current in the parallel circuit that has 620 Ω, 750 Ω, and 820 Ω resistors connected to a 40 V source. You want to know the possible fault if the current is 118 mA.
(a) Parallel circuitEach of the resistors is connected directly to the source, so the total current supplied by the source is the sum of the currents through each of the resistors:
40V/(620Ω) ≈ 64.52 mA
40V/(750Ω) ≈ 53.33 mA
40V/(820Ω) ≈ 48.78 mA
The total source current is ...
64.52 +53.33 +48.78 = 166.63 mA
The source current is about 166.6 mA.
(b) 118 mAA source current of 118 mA is about 48.63 mA less than expected. That current is approximately the amount through the 820Ω resistor, suggesting that the 820Ω resistor is not passing any current.
The 820Ω branch of the circuit appears to be "open."
A)Total Resistance = 1/((1/620)+(1/750)+(1/820)) = 468 ohms,Total Source Current = 40 V / 468 ohms = 85.51 mA (b) If the measured current was 118 mA, then this indicates that there is a fault in the circuit.
What is the measured ?
The measured is the amount or quantity of something that has been determined by careful examination or calculation. It is usually expressed as a number or a comparison. Measuring is the process of determining the amount or quantity of something, typically by comparison with a standard or unit. Measuring can be done in many ways, including the use of instruments such as rulers, scales, thermometers, and other devices.This could be due to an additional resistance in the circuit that is causing the current to increase.
To learn more about measured
https://brainly.com/question/30134560
#SPJ4
please answer the question
In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.
What is gas absorption experiment ?The previous chapter provided derivations of the relationships for mass and momentum conservation—the equations of motion—in rectangular, cylindrical, and spherical coordinates.
All experimental evidence suggests that these are the most fundamental equations of fluid mechanics, and that they govern any situation involving the flow of a Newtonian fluid in principle.
Therefore, In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.
Learn more about momentum on:
https://brainly.com/question/24030570
#SPJ1