Answer:
This law, first proposed and tested by Émilie du Châtelet, means that energy can neither be created nor destroyed; rather, it can only be transformed or transferred from one form to another. For instance, chemical energy is converted to kinetic energy when a stick of dynamite explodes.
Explanation:
Answer:
Hi! I am confused
Explanation:
A stone dropped from the top of a building strikes the ground in 4.2 s. How tall is the building? Someone explain please!
Answer:
well i'm not sure if which unit of measure you need but i think its 86.49 meters tall.
1. Describe the two phenomena (sub-problems) that caused the contamination of Cleveland’s drinking water. 2. What criteria (data points) were the NOAA buoys collecting to address the sub-problems faced by Cleveland Water? Which of these criteria should have highest priority when determining a solution to the sub-problems? 3. What societal, ecological, or technical constraints should resource managers consider before proposing solutions? 4. Describe the design solution engineers and scientists developed to prevent contamination of Cleveland drinking water. Why did their solution need to address both sub-problems equally? 5. Propose two additional solutions to address the ecological phenomena causing the water contamination in Lake Erie.
Answer:
Explanation:
1) One was the harmful algae blooms that happen annually. The other is hypoxia development which is also a seasonal phenomenon. 2) Temperature should have been highest priority.
Why would the CPSC perform studies when other soap and detergent companies have already conducted research on the same products? The CPSC is the only organization that can test the safety of soaps and detergents. Studies conducted by any company that benefits financially are considered unreliable. Studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company. Tests performed by the CPSC follow established scientific methods, but those performed by soap companies do not.
Answer: Studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company.
Explanation:
The function of Consumer Product Safety Commission is to make sure that the products which are used by consumers are safe and also make sure that companies meet the required and acceptable safety standards. The products that are seen to be harmful to the health of the consumers are banned.
Regarding the question above, CPSC would perform studies when other soap and detergent companies have already conducted research on the same products because the studies performed by the CPSC give reliability to the results of improved safety obtained by each soap company.
Answer:
Tests performed by the CPSC follow established scientific methods, but those performed by soap companies do not.
Explanation:
5 grams is thes than greater than or equal too 508mg
Answer:
yes 5 is greater
Explanation:
Answer: 5 grams is greater than 508 milligrams. Even though the number '508' is larger than '5,' you need to look at the units.
True or False. Energy can move in waves.
True, energy can in move in waves because waves transfers energy during their propagations.
A wave is a disturbance that transfers energy from one point to another, along its path of propagation.
A wave can be mechanical or electromagnetic.
A mechanical type of wave requires material medium for its propagation.
Examples;
sound wavewater waveAn electromagnetic wave does not require material medium for its propagation.
Examples;
Gamma rayx-rayultraviolet rayvisible light, etcThus, we can conclude that energy can in move in waves because waves transfers energy during their propagations.
Learn more here:https://brainly.com/question/762967
What is the depth of the crater if the time is 6.3 s? An astronaut stands by the rim of a crater on the moon, where the acceleration of gravity is 1.62 m/s2. To determine the depth of the crater, she drops a rock and measures the time it takes for it to HIT the bottom
Complete Question
An astronaut stands by the rim of a crater on the moon, where the acceleration of gravity is 1.62 m/s2. To determine the depth of the crater, she drops a rock and measures the time it takes for it
to hit the bottom. If the time is 6.3 s, what is the depth of the crater?
Answer:
The depth is 32 m
Explanation:
From the question we are told that
The time is t = 6.3 s
The acceleration due to gravity is [tex]g = 1.62 \ m/s^2[/tex]
Generally from kinematic equation
[tex]s = ut + \frac{1}{2} - at^2[/tex]
Here the u is the initial velocity and the value is 0 m/s
[tex]s = 0 + \frac{1}{2} - (1.62) * (6.3)^2[/tex]
[tex]s = 32 \ m [/tex]
A force of 500 N acts for a time interval of 0.001 second on an object of mass 0.20 kg that was initially at rest. Calculate the final velocity of the object after the force acts
Answer:
100
Explanation:
The final velocity of the object after the force acts is 2.5 meters per second.
To calculate the final velocity of the object after the force acts, we can use Newton's second law of motion, which states that:
Force = Mass × Acceleration
We need to find the acceleration of the object first. Since the object was initially at rest, its initial velocity (u) is 0 m/s.
The force acting on the object is 500 N, and the mass of the object is 0.20 kg. We can rearrange the equation to find the acceleration (a):
Acceleration (a) = Force / Mass
a = 500 N / 0.20 kg
a = 2500 m/s²
Now, we can use the kinematic equation to find the final velocity (v) of the object:
Final velocity (v) = Initial velocity (u) + (Acceleration × Time)
The initial velocity (u) is 0 m/s (since the object was initially at rest), and the time interval (t) is 0.001 second.
Final velocity (v) = 0 m/s + (2500 m/s² × 0.001 s)
v = 0 m/s + 2.5 m/s
v = 2.5 m/s
Hence, the final velocity of the object after the force acts is 2.5 meters per second.
To know more about final velocity here
https://brainly.com/question/28608160
#SPJ2
which of the following is the same as 1 second
Answer:
theres no
Explanation:
picture or anything so... ur question doesnt make sense
If a car accelerates at a uniform 4.0 m/s, how long will it take to reach a speed of 36.0 m/s,
starting from rest?
Answer:
9s
Explanation:
v=u+at
36=0+4t
t=36-0/4
t=9s
pls help asap pls explain. Just before opening her parachute a skydiver having a mass of 50 kg reaches terminal velocity. Calculate the force of air resistance if the buoyant force is 20 N. Be careful! Use the skydiver’s mass to calculate his/her Fg (force of gravity).
Answer:
490N
Explanation:
Given that,
Mass of a skydiver, m = 50 kg
Buoyant force = 20 N
When the skydiver reaches the terminal velocity, net force on her is equal to 0. So, air drag is equal to the weight of the skydiver.
D = mg
Putting all the values,
D = 50 × 9.8
D = 490 N
So, the force of air resistance is 490 N.
A sprinter can run 100.0 meters in 10.4 seconds. Find the velocity of this runner. (Please put answer into ladder cancellation format!!)
1.Why is wheel and axle a simple machine?
2.What is meant by effort is multiplied?
Answer:
The wheel and axle is a type of simple machine used to make tasks easier in terms of manipulating force by applying the concept of mechanical advantage.Due to the size difference in the radius of the wheel and axle, this means that the distance the two parts rotate through in the same amount of time is different.
match the letter with the layer
Answer:
Thermosphere A,B
Mesosphere B,C,D
Stratosphere D,E,F
Troposphere G
Hope this helps please give me brainliest!
God bless :)
If an object starts accelerating from rest at a rate of 35 m/s2, then how far does it travel during the first second?
An object on another planet with g = 25 m/s^2 hits the ground from rest in 4 seconds. How far did it fall?
Choices:
•200.0m
•100.0m
•1000.0m
•25.0m
A model railroad train travels at a constant speed of 8 cm/s . How far would the train travel in one minute ?
Answer:
Answer:
480cm or 0.48m
Explanation:
Given parameter:
Speed of the train = 8cm/s
time of travel = 1minute
Unknown:
Distance traveled = ?
Solution:
Speed is the rate of change of distance with time. This suggests that mathematically;
Speed =
Distance covered = speed x time
Now to solve for the distance;
Convert the time to seconds;
60seconds = 1 minute
Distance covered = 8cm/s x 60s = 480cm
Distance covered is 480cm or 0.48m
Which model of the atom has electrons traveling in specific paths around the nucleus? Bohr's model Rutherford's model Thomson's model Dalton's model
Answer:
A, Bohr's model
Explanation:
Took the quiz, hope it's right for you.
(The other three did have something to do with it they just didn't create that specific model)
The model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
J. J Thomson proposed that the atom is a sphere of positively charged matter in which negatively charged electron are embedded.
In Rutherford's model of atomic structure, the electrons moves in orbits by electrostatic attraction to the positively charged nucleus.
According to Dalton's atomic theory, atom were indestructible and indivisible solid particle.
Bohr's model made assumption that electron can only exist in circular orbits of definite quantum energy.
According to the question, the model of the atom that has electrons traveling in specific paths around the nucleus is Rutherford's model.
Therefore, the correct answer is option B
Learn more here : https://brainly.com/question/16776207
How do Newton's and Kepler's laws apply to galaxies(or galaxy collisions)?
Answer:
Newton's Laws of Motion
If Kepler's laws define the motion of the planets, Newton's laws define motion. Thinking on Kepler's laws, Newton realized that all motion, whether it was the orbit of the Moon around the Earth or an apple falling from a tree, followed the same basic principles.
Which scenario does not describe an example of acceleration?
A car increases its speed while turning to the left.
A car decreases its speed while driving straight ahead.
A car maintains a constant speed while turning to the right.
A car maintains a constant speed while driving straight ahead.
Answer:
B is the right answer
Explanation:
It is decreasing.
A car maintains a constant speed while driving straight ahead.
What is acceleration?The acceleration of an object is the rate of change of velocity with time. It is measured in meter per second square.
Velocity of the carThe car undergoes velocity when there is change in direction of the speed.
Thus, the only option that does not describe acceleration is a car maintains a constant speed while driving straight ahead.
Learn more about acceleration here: https://brainly.com/question/14344386
Consider a buggy being pulled by a horse.
Which is correct?
1. The horse can pull the buggy forward only
if the horse weighs more than the buggy.
2. The force on the buggy is as strong as the
force on the horse. The horse is joined to the
Earth by flat hoofs, while the buggy is free to
roll on its round wheels.
3. The horse pulls before the buggy has time
to react so they move forward.
4. The horse pulls forward slightly harder
than the buggy pulls backward on the horse,
so they move forward.
Answer:
Option 2
Explanation:
Answer:B
Explanation:because she started of with no money and now she made her money up
Which characteristic is related to kinetic energy but not potential energy?
A. An object's shape
B. An object's mass
C. An object's speed
D. An object's height
Answer:
c
Explanation:
An object's speed is the characteristic which is related to kinetic energy but not the potential energy. Thus, the correct option is C.
What is Kinetic energy?The kinetic energy of an object is the energy which it possesses due to the motion of the object. Kinetic energy is defined as the work which is needed to accelerate an object of a given mass from rest position to its stated velocity. Having gained this amount of energy during the acceleration of the object, the object maintains this kinetic energy unless its speed changes or it experiences acceleration.
Kinetic energy is directly proportional to the mass of the object and to the square of the velocity of the object, the expression is:
K.E. = 1/2 m × v²
where, KE = Kinetic energy,
m = mass of the object,
v = velocity of the object.
Therefore, the correct option is C.
Learn more about Kinetic energy here:
https://brainly.com/question/26472013
#SPJ2
If an object is moving up, is it considered to have a positive or negative velocity?
Answer:
A positive velocity
Explanation:
Look at pic.... 2 examples of radiation and how they are radiation
Answer:21
Explanation:
The sum of potential energy and kinetic energy is
Answer:
The total mechanical energy
Explanation:
M = Mass
V = Velocity
G = Gravity
H = Height
KE = 1/2mv²
PE = mgh
ME = KE + PE
ME = 1/2 mv² + mgh
List out Units For: Acceleration
Unit for Acceleration is m/s² or ms raised to -2
3. A person who is initially stationary is eventually walking
at a speed of 1.5 m/s after an acceleration of 0.5 m/s?,
calculate the distance it takes them to reach this speed.
4. A lorry pulls forward after initially being stationary, it
takes the lorry 40 m to reach a speed of 8 m/s, calculate the
lorry's acceleration.
7. A person begins moving after initially being stationary, the person
accelerates at 0.5m/s2 over a distance of 9m what is their final speed
Explanation:
3. A person who is initially stationary is eventually walking
at a speed of 1.5 m/s after an acceleration of 0.5 m/s?,
calculate the distance it takes them to reach this speed.
Given parameters:
Initial velocity = 0m/s
Final velocity = 1.5m/s
Acceleration = 0.5m/s
Unknown:
Distance = ?
Solution:
To solve this problem, we apply the relevant motion equation;
V² = U² + 2aS
where V is the final velocity
U is the initial velocity
a is the acceleration
S is the distance
Input the parameters;
1.5² = 0 + 2 x 0.5 x S
2.25= S
The distance to reach this speed is 2.25m
4. A lorry pulls forward after initially being stationary, it
takes the lorry 40 m to reach a speed of 8 m/s, calculate the
lorry's acceleration.
Given parameters:
Initial velocity = 0m/s
Final velocity = 8m/s
Distance = 40m
Unknown:
Acceleration = ?
Solution:
V² = U² + 2aS
Input the parameters and solve;
8² = 0² + 2 x a x 40
64 = 80a
a = [tex]\frac{64}{80}[/tex] = 0.8m/s²
7. A person begins moving after initially being stationary, the person
accelerates at 0.5m/s2 over a distance of 9m what is their final speed
Given parameters:
Initial velocity = 0m/s
acceleration = 0.5m/s²
distance = 9m
Unknown:
Final velocity = ?
Solution:
V² = U² + 2aS
Input the parameters and solve;
V² = 0² + 3 x 0.5 x 9
V² = 13.5
V = 3.7m/s
Suppose a boat moves at 12.0m/s relative to the water. If the boat is in a river with the current directed east of 2.50m/s, what is the boat's speed relative to the groiund when it is heading (a) east, with the current, and (b) west, against the current?
Answer:
(a) 14.5 m/s
(b) 9.5 m/s
Explanation:
Let the speed of the boat in the still water (i.e relative to ground) is [tex]v_0[/tex].
Given that the speed of the boat relative to water, [tex]v_r=12.0[/tex] m/s.
Speed of the water current of the river relative to the ground, [tex]u_0=2.50[/tex] m/s towards east.
(a) When the boat is heading toward the east (in the same direction of the current of the river)
The relative velocity, [tex]v_r[/tex], of the boat with respect to ground is
[tex]v_r=v_0-u_0[/tex]
[tex]\Rightarrow 12=v_0-2.5[/tex]
[tex]\Rightarrow v_0=12+2.5=14.5[/tex] m/s
Hence, the boat's speed relative to the ground when it is heading east, with the current, is 14.5 m/s.
(b) When the boat is heading toward the west (in the opposite direction of the current of the river)
The relative velocity, [tex]v_r[/tex], of the boat with respect to ground is
[tex]v_r=v_0-(-u_0)[/tex]
[tex]\Rightarrow 12=v_0+2.5[/tex]
[tex]\Rightarrow v_0=12-2.5=9.5[/tex] m/s
Hence, the boat's speed relative to the ground when it is heading west, against the current, is 9.5 m/s.
he lower the frequency of the wave the ____________ it will have.
a
more medium
b
more energy
c
more amplitude
d
less energy
Explanation:
D. Less Energy
The more energy in a wave, the higher it's frequency
The less energy in a wave, the lower the frequency is
What is meant by the term total internal reflection? What two conditions must be met for total internal reflection to occur?
Answer:
Hello....
Explanation:
Total internal reflection, in physics, complete reflection of a ray of light within a medium such as water or glass from the surrounding surfaces back into the medium. The phenomenon occurs if the angle of incidence is greater than a certain limiting angle, called the critical angle.
The conditions required for total internal reflection (TIR) to occur are:
1)the light must be travelling from a more dense medium into a less dense medium (ie glass to air)
2)the angle of incidence must be greater than the critical angle.
HOPE IT HELPS YOU DEAR....
PLEASE MARK AS BRAINLIEST....
PLEASE FOLLOW ME...
A car is said to go "zero to sixty in six point six
seconds" (0 to 60 mph in 6.6 seconds). What is its
acceleration in m/s??