A high pressure system has higher pressure at its center than the areas around it
Scientists that work in Antarctica mostly refer to the majority of the continent as being a cold desert
Explanation:
The force of a hammer drives a nail into wood. This is an example of? A. An unbalanced force. B. Gravitational force. C. Friction. D. Balanced forces.
Answer:
The answer is A. an unbalanced force
Explanation:
This is because the force from the hammer on the nail causes a force that unbalanced normal forces on the nail.
Gives 2 reaction in which benzene ring is retained and 2 reaction in which benzene ring is not retained
Hey dear,
Benzene is a 6-C cyclic structure with alternate double bonds.
● Reactions -
1) Benzene to cyclohexane -
Benzene can be reduced to cyclohexane with
the help of Ni/H2. C6H6 + 3H2 --> C6H12
All 3 double bonds in ring are reduced here.
2) Benzene to benzoquinone - Benzene can be oxidized to benzoquinone with
the help of acidic K2Cr207. C6H6 +3[O] --> C6H4O2 + H2O
Only 1 double bond is lost in this reaction.
Hope this helps you.
Kinetic friction is the frictional force needed to start an object at rest into
motion.
O A. True
O B. False
Answer:false you are welcome
Explanation:
Answer: False I hope this helpful please mark me brainlist
Explanation:
Kinetic friction is the friction acting upon a moving object. It would be the frictional force against you if you pulled a box across a table.Static friction is the frictional force needed to overcome to get an object at rest into motion.
Which water usage uses the least amount of water in a year in the United States
A : industry
B : irrigation
C : livestock
D : public water supply
Answer: a
Explanation:
Industry uses only about 18% while the others use around 70-90% of water.
YW!!! please mark branlest!!!! =^.^=
1. List the actual volume of titrant needed to produce a color change for Sample A and Sample B. Answer: Volume of titrant needed to produce a color change for Sample A:\ ml Volume of titrant needed to produce a color change for Sample B: ml
Answer: B Hope this helps :)
One material property that is widely used and recognized is the strength of a material. But what does the word "strength" mean? "Strength" can have many meanings, so let us take a closer look at what is meant by the strength of a material. We will look at a very easy experiment that provides lots of information about the strength or the mechanical behavior of a material, called the tensile test.
The basic idea of a tensile test is to place a sample of a material between two fixtures called "grips" which clamp the material. The material has known dimensions, like length and cross-sectional area. We then begin to apply weight to the material gripped at one end while the other end is fixed. We keep increasing the weight (often called the load or force) while at the same time measuring the change in length of the sample.
Explanation:
Which bond links amino acids together?
glycosidic bond
hydrogen bond
phosphodiester bond
peptide bond
Answer:
Peptide Bonds
Explanation:
Peptide bonds are formed by a biochemical reaction that extracts a water molecule as it joins the amino group of one amino acid to the carboxyl group of a neighboring amino acid.
Granite is part of the crust layer of the earth.
True
False
Answer:
That would be True
Explanation:
granite is a part of the crust layer.
A chemistry assignment has a student conduct a single replacement reaction by adding 7.5g of sodium metal to 20.0g of aluminum chloride. How much aluminum in moles would precipitate out as a result of the reaction
Answer: 0.109 mol
Explanation:
Balanced chemical equation:
3 Na(s) + AlCl3(aq) --> 3 NaCl(aq) + Al(s)
3 moles of sodium metal react with 1 mole of aluminum chloride to produce 3 moles of aluminum chloride and 1 mole of solid aluminum
Molar mass of Na = 22.99 g/mol
Mass(Na) = 7.5 g
Find number of moles of Na:
n = mass of Na/molar mass of Na
=(7.5 g)/(22.99 g/mol)
= 0.3262 mol
Molar mass of AlCl3,
MM = 1*MM(Al) + 3*MM(Cl)
= 1*26.98 + 3*35.45
= 133.33 g/mol
Mass(AlCl3) = 20.0 g
Find number of moles of AlCl3,
n = mass of AlCl3/molar mass of AlCl3
=(20 g)/(1.333*10^2 g/mol)
= 0.15 mol
Balanced chemical equation is:
3 Na + AlCl3 ---> Al + 3 NaCl
3 mol of Na reacts with 1 mol of AlCl3
for 0.3262 mol of Na, 0.1087 mol of AlCl3 is required
But we have 0.15 mol of AlCl3
So, Na is the limiting reagent and we will use it in our further calculations.
According to balanced equation:
mol of Al formed = (1/3) * moles of Na
= (1/3)*0.3262
= 0.1087 mol
Answer: 0.109 mol of aluminum will precipitate out as a result of the reaction
please help and show work will be picking brainliest
Answer:
34x4v
Explanation:
ik it is write
Arrange the following acids from strongest to weakest:
HF, HBr, HCl, HI
Answer:
HI>HBr>HCL>HF
Explanation:
Volume of distillate = 300 ml
Volume of Ethanol in the mixture = 450 ml
% Recovery =
Based on the distillation data provided, the percent recovery of ethanol is 66.7%
What is distillation?Distillation is a separation technique which is used to separate two miscible liquids based on differences in their boiling points.
At the boiling point of the first liquid, it distills over and is obtained by condensation.
The liquid obtained is known as distillate.
In the distillation of ethanol, the percent recovery is calculated as follows:
Percent recovery = (volume of distillate/volume of ethanol in mixture) × 100%From the data given:
Volume of distillate = 300 mlVolume of Ethanol in the mixture = 450 mlPercent Recovery = (300/450) × 100%
Percent recovery = 66.7%
Therefore, the percent recovery of ethanol is 66.7%.
Learn more about about distillation at: https://brainly.com/question/24553469
PLEASE HELP!!!!!!!
You compare the gas generated from a reaction using two antacid tablets with the gas generated from a reaction using four antacid tablets (consider the antacid as the limiting reagent).
At constant pressure and temperature, how do the volumes of the gases compare?
The two reactions produce the same amount of gas.
The gas generated by four antacid tablets has a smaller volume.
The gas generated by two antacid tablets has a smaller volume.
Answer: The gas generated by two antacid tablets has a smaller volume.
Explanation:
Since the antiacid is the limiting reagent, we know that the more tablets there are, the more gas there will be.
This means that there will be more gas generated by the four antiacid tablets when compared to the two antiacid tablets, which gives us that the gas generated by the two antiacid tablets has a smaller volume.
A sample of excited atoms lie 3.314×10−19 J above the ground state. Determine the emission wavelength of these atoms.
The emission wavelength of the atoms excited above the ground state is 599.8 nm.
Emission wavelength of the atomsThe emission wavelength of the atom is determined by using the following formulas as shown below;
E = hf
E = hc/λ
where;
E is the energy of the atomh is Planck's constantc is speed of lightλ is the emission wavelengthλ = hc/E
λ = (6.626 x 10⁻³⁴ x 3 x 10⁸) / (3.314 x 10⁻¹⁹)
λ = 5.998 x 10⁻⁷ m
λ = 599.8 x 10⁻⁹ m
λ = 599.8 nm
Thus, the emission wavelength of the atoms is 599.8 nm.
Learn more about wavelength here: https://brainly.com/question/10728818
An ion has 14 protons and a charge of “+2”. How many electrons does it have?
Answer : 12
It has a +2
Take it out from 14
What are the characteristics of nonvascular plants? (select all that apply) A . They don’t rely on roots to receive water.
B .They have xylem vessels and phloem vessels
C . They are able to push water and nutrients to each part of the plant.
D . They are found in moist environments.
Answer:
D . They are found in moist environments.
Explanation:
Nonvascular plants do not have a xylem or phloem, roots, stems, or leaves. Because these plants lack water-conducting tissues, they fail to achieve the structural complexity and size of most vascular plants and have evolved in habitats which allow their survival and reproduction.
The plant body that is most obvious in non-vascular plants are the the gametophyte generation. The gametophte gemeration is haploid.
The non-vascular plants grow in moist environments. It is due to lack of vascular tissue that requires to maintain close contact with water to prevent desiccation. Nonvascular plants are plants that do not have any special internal pipelines or channels to carry water and nutrients. Instead, nonvascular plants absorb water and minerals directly through their leaflike scales. Nonvascular plants are usually found growing close to the ground in damp, moist places. Non-vascular plants thrive in damp conditions since they don't need to rely on roots to acquire enough water.
Write and balance tin and copper(ii) oxide react to form copper and tin IV oxide
Answer:
tin Is more reactive than copper so it reduces oxygen from copper
______ contributes to the nitrogen cycle by removing nitrogen from the air and converting it into a form that is usable by plants.
plants
earthworms
fungi
bacteria
The complete statement is "Bacteria contribute to the nitrogen cycle by removing nitrogen from the air and converting it into a form that is usable by plants." This is further explained below.
What is Bacteria?Generally, Bacteria are mono-celled tiny creatures that can be beneficial. Bacteria are germs with a simpler cell structure than many other creatures.
In conclusion, Bacteria contribute to the nitrogen cycle by removing nitrogen from the air and converting it.
Read more about Plant
https://brainly.com/question/25832580
Answer:bacteria
Explanation:
When heated, KClO3 decomposes into KCl and O2. 2KClO3⟶2KCl+3O2 If this reaction produced 17.4 g KCl, how many grams of O2 were produced? maSS
Answer:
12.6 g O2 or
12.60 g O2 (if needed two decimal places)
Explanation:
First convert grams into moles:
17.4 g KCl × 1
74.55
= 0.233 moles of KCl
Next solve for the mole of O2:
= 0.233 × 3 moles of O2
2 moles of KCl
= 0.3495 or
= 0.350 moles of O2
Finally convert the mole to grams:
= 0.350 moles of O2 × 36g
1 mole
= 12.6 g O2 or 12.60 g O2
Answer:
a car traveled 20m &400k/g
How to do Lewis structure for Al?
Notes:-
Al has Z=15electron configuration:-
[Ne]3s²3p³Valency is 3
So 3 dots are included
What metal speeds up rusting
Answer:
Vinegar
Explanation:
What liquid makes metal rust the fastest? Vinegar speeds up rusting because it contains a dilute form of acetic acid; positive hydrogen ions in the acid remove electrons from iron, ionizing it and making it susceptible to rust. How do you rust metal quickly?
Answer:
iron, especially if it is exposed to water and oxygen
In the reaction between 15.8 g of NH3 and 22.7 g oxygen, water and nitrogen monoxide are
produced. Determine which reactant is limiting and calculate the number of grams of each
product.
Explanation:
limiting is NH3
NO:27/88g
H2O: 25/09g
Which of the following are characteristics of stratovolcanoes? Select all that apply.
More common near convergent boundaries
More common at hotspots
Effusive eruptions
Explosive eruptions
High viscosity magma
Low viscosity magma
Answer:
More common near convergent boundaries
Explosive Eruptions
Low Viscosity Magma
Explanation:
Hot spots like hawaii are better known for shield volcanoes. The magma is high viscosity which causes them to build pressure before erupting, leading to explosive eruptions.
Help me plssssssssss
Answer:
The answer for this selection is 4
Explanation:
14. Calculate the mass in grams of oxygen required to react completly with 0.75 moles of Aluminum.
4Al + 302 → 2Al2O3
a. 32 g of Oxygen
b. 18 g of Oxygen
c. 16 g of Oxygen
d. 9.0 g of Oxygen
Moles of O_2:-
0.75(0.75)0.5625molMass of O_2:-
moles(Molar mass)0.5625(32)18gOption B
As per the given balanced reaction, 0.75 moles of aluminum metal requires 0.56 moles of oxygen gas for completely reaction. One mole of oxygen gas is 32 g. Then, mass of 0.56 moles is 18 g.
What is aluminum oxide ?Metals and metal like elements such as aluminum Al are more reactive towards atmospheric oxygen and forms their oxide layers in the metallic surface.
Al₂O₃ is an essential mineral of aluminum formed by the reaction with oxygen as given in the balanced chemical equation. As per this equation, 4 moles of Al requires 3 moles of oxygen for complete reaction.
The number of moles of oxygen required by 0.75 moles of Al is:
(0.75 × 3) /4 = 0.56 moles.
one mole of oxygen weighs 32 g/mol.
mass of 0.56 moles of O₂ = 32 × 0.56 = 18 g.
Therefore, the mass required by 0.75 moles of Al in the reaction is 18 g.
Find more on Al₂O₃:
https://brainly.com/question/15089294
#SPJ2
What type of energy transformation takes place during cellular respiration?
Use complete sentences to explain how energy is conserved during cellular respiration. (10 points)
Answer:
chemical energy transgormation takes place during cellular respiration
What is the chemical name
for ca2 and clo3-
Answer:
Calcium chlorate | Ca(ClO3)2 - PubChem.
Explanation:
Suggest some ways in which you might determine whether a particular water solution contains an acid or a base.
The use of the pH scale and litmus paper are the ways which can determine whether the solution is an acid or base.
How pH scale and litmus paper tell about acidic and basic solution?The pH scale is the way which determine the acidic or basic nature of a solution. If the pH of a solution is less than 7, it is considered as acidic. If the pH is 7, the solution is neutral and if the pH is greater than 7,the solution is basic.
While on the other hand, litmus paper also tells us about acidic and basic nature of solution. if the litmus paper turns red, it means the solution is acidic whereas if the litmus paper turns blue it means basic.
Learn more about acid here: https://brainly.com/question/25148363
explain chemical equilibrium
Answer:
chemical equilibrium, condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs. A reversible chemical reaction is one in which the products, as soon as they formed, react to produce the original reactants.
Explanation:
chemical equilibrium is the state in which both reactants and products are present in concentrations which have no further tendency to change with time, so that there is no observable change in the properties of the system.
What is added to balance hydrogen and oxygen atoms in an oxidation-
reduction reaction in basic solution?
A. OH and H2O
B. Ht and H20
C. H2 and 02
D. OH and Ht
Answer:
OH^- and H_2O
Explanation:
Remember these things about basic and acidic medium
In acidic medium we add H+ to balance Hydrogen and H_2O for OxygenIn basic we add OH- which turns H+ to waterWhat happens when the temperature of a gas is increased?
O A. The boiling point will increase,
O B. The collisions between molecules will decrease,
O C. The volume will increase,
D. The pressure will decrease,