Answers
Explanation:
20 joule is your answer
Answer:
here
mass m =100kg
distance d=50m
acceleration due to gravity a =10m/s²
work =force×displacement
= ma/d=100×10/50=20joule
Related Questions
Kyle and Jenny both have pet rabbits. They wanted to see who had the fastest rabbit, so they each recorded data at their homes and brought it's the results. Kyle rabbit went a total of 40 m in a time of one minute and 20 seconds. Jenny's rabbit went 30 m in one minute and 30 seconds. What was the velocity of Kyle's rabbit? What was the velocity of jennies rabbit? Whose rabbit was the fastest?
Answers
Answer:
v_kyle = 0.5 m/s
v_jennies = 0.333 m/s
Kyle's Rabbit was the fastest
Explanation:
For the velocity of Kyle's Rabbit:
d = distance covered = 40 m
t = time taken = (1 min)(60s/1 min) + 20 s = 80 s
[tex]v_{kyle} = \frac{d}{t} = \frac{40\ m}{80\ s}[/tex]
v_kyle = 0.5 m/s
For the velocity of Jennies Rabbit:
d = distance covered = 30 m
t = time taken = (1 min)(60s/1 min) + 30 s = 90 s
[tex]v_{jennies} = \frac{d}{t} = \frac{30\ m}{90\ s}[/tex]
v_jennies = 0.333 m/s
It is clear from the results that:
Kyle's Rabbit was the fastest
When air warm up the air molecules move slower?
Answers
At the center, 6 unmarked red balls are interspersed with 4 blue balls marked with plus signs. A green cloud with 2 concentric white lines surrounds the center, with 2 small green balls marked with minus signs on the inner white line and 2 small green balls marked with minus signs on the outer white line. How many neutrons does this atom have? 4 6 10 14
Answers
Answer:
10
Explanation:
Amu denotes for unified atomic mass.
it is mostly used to define the atom's mass and molecules.
we know that
One unit of amu is 1 ÷ 12 of the mass of a nuclide 12C
And 1 u = 1.660 538 921 × 10-27 kg
In the inside we can found that there is 10 nucleons so here the alss of the atoms would be 10 amu
Answer:
guy above me is right
Explanation:
moving plates form what tyes of boundaries?
A. Convergent, tectonic, and rift valley
B. Transform, mid-ocean, divergent.
C. Mid-ocean, divergent, and trench.
D. Transform, convergent, divergent.
Answers
transform, convergent, divergent is the answer
hope it helps
A hot iron ball of mass 200 g is cooled to a temperature of 22°C from 100°C. How much heat was
lost in the process?
(Ciron = 0.444 J/g°C)
Q =mcAT
Answers
Answer:
Q= -6900 J
Explanation:
use the formula Q=mC(T_2 - T_1) and sub in givens
Q=mC(T_2 - T_1)
Q= (200 g)(0.444 J/g°C)(22-100)
Q= -6900 J
The negative sign means heat is lost, which agrees with the decrease in temperature
The wave above has a wavelength of 6.25 meters and a frequency of 5 hertz. Calculate the speed.
Answers
Answer:
Wave Speed (m/s)
31.25
Summary
Wavelength (m)6.25
Frequency (hz)5
Explanation:
https://calculator.academy/wave-speed-calculator/#f1p1
Which motions are the components of projectile motion? A and B B and C A and C None of these are correct combinations.
Answers
Answer:
its A and B
Explanation:
Answer:
A or A and B
Explanation:
correct on edge 2021
The diagram shows a skydiver at different points of her jump. At what point would her
acceleration be greatest?
A.
B.
C.
D.
Answers
Fill in the blanks to complete each statement about energy in Earth’s crust. (use lower case wording only)
Plate movements on Earth’s crust create
.
This adds energy to the crust, which then bends and breaks, forming
.
Answers
Answer:
stress and fault
Explanation:
yes
Answer:
Stress for the first one and the second faults
Explanation:
Hey guys, can you please help me with this question?
A rectangular container of base 50 cm by 30 cm is filled with water to a depth of 5 cm. How much is the pressure exerted at the base? (Take p= 1000 kg/m3 and g=10m/s)
Answers
Answer:
the pressure exerted at the base of the container is 490 N/m²
Explanation:
Given;
density of water, ρ = 1,000 kg/m³
base of the rectangular container, = 50 cm by 30 cm
height of water in the tank, h = 5 cm = 0.05 m
The pressure exerted at the base of the container is calculated as;
P = ρgh
where;
g is acceleration due to gravity = 9.8 m/s²
P = 1000 x 9.8 x 0.05
P = 490 N/m²
Therefore, the pressure exerted at the base of the container is 490 N/m²
which describes an object in projectile motion
Answers
Answer:
Gravity acts to push the object sideways
Explanation:
projectile motion is a motion that moves along a curved path under the action of gravity only. Hope this helps!
I'll mark brainliest
Q: You're playing a game of catch with a dog, the dog is initially standing near your feet. Then he jogs 20ft in a straight line to retrieve the stick and carries the stick 15ft back towards you before lying on the ground to chew the stick.
A). Cal the total distance
B) . Total displacement
C). Show that the net displacement of the trip is the sum of the sequential displacement that makes up the trip.
Answers
Answer:
A) 35 ft
B) 5 ft
C) Net displacement = distance covered by the dog to retrieve the stick - distance covered before the dog starts chewing the stick
Explanation:
A) Total distance covered by the dog = 20 + 15
= 35 ft
B) Since the other distance covered by the dog before chewing the stick, after the retrieval, was in an opposite direction to the initial direction, then;
total displacement of the dog = 20 - 15
= 5 ft
C) Net displacement = distance covered by the dog to retrieve the stick + distance covered before the dog starts chewing the stick
But, displacement involves a specified direction. The distance covered before the dog starts chewing the stick was in an opposite direction to the initial direction.
Thus,
Net displacement = distance covered by the dog to retrieve the stick - distance covered before the dog starts chewing the stick
The Doppler Effect for sound occurs when:
a) the speed of the wave changes
b) the height of the wave changes
c) the distance between the waves change
d)the moving object decreases in speed
Answers
Your teacher gives you an envelope that contains the following items: ● 20 red paper circles labeled with a “+” symbol to indicate they represent protons ● 20 blue paper circles with no label to indicate they represent neutrons ● 20 yellow paper circles labeled with the “-“ symbol to indicate they represent electrons Your teacher then challenges you to use the items in the envelope to create a model of a carbon-14 atom. Before you begin, you and your group brainstorm ideas for creating your model. Your group suggests the following steps: Step Procedure 1 use 6 red circles for the nucleus of the atom 2 use 14 red circles for the nucleus of the atom 3 add 6 blue circles to the nucleus of the atom 4 add 8 blue circles to the nucleus of the atom 5 place 14 yellow circles around the nucleus of the atom 6 place 6 yellow circles around the nucleus of the atom Which of the following steps should you follow to create a correct model of a Carbon-14 atom? A. steps 2, 3, 6 B. steps 2, 4, 5 C. steps 1, 4, 6 D. steps 1, 3, 5
Answers
Answer: C
Explanation: I did the test
We need to use 6 red circles and 8 blue circles to represent the 6 protons and 8 neutrons in the nucleus. Then, we need to place 6 yellow circles around the nucleus to represent the 6 electrons in the atom. Option C is correct.
How to create a Carbon-14 atom?To create a correct model of a Carbon-14 atom, we need to follow the steps that represent the correct number of protons, neutrons, and electrons in a carbon-14 atom.
Carbon-14 has 6 protons and 8 neutrons, so we need to use a total of 6 red and 8 blue circles in the nucleus. It also has 6 electrons, so we need to place 6 yellow circles around the nucleus.
The correct steps to follow to create a model of a Carbon-14 atom are:
B. steps 1, 4, 6
Step 1: Use 6 red circles for the nucleus of the atom
Step 4: Add 8 blue circles to the nucleus of the atom
Step 6: Place 6 yellow circles around the nucleus of the atom
Therefore, we need to use 6 red circles and 8 blue circles to represent the 6 protons and 8 neutrons in the nucleus. Then, we need to place 6 yellow circles around the nucleus to represent the 6 electrons in the atom.
Learn more about Carbon-14 atom here:
https://brainly.com/question/30727793
#SPJ2
The gravitational force between two bodies is 250N . What will the new force be if one of the masses is tripled?
Answers
If one of the masses is tripled, then their product is tripled, and the force between them is tripled. The new force is 750N .
If it takes 3.5 hours for a train to travel between two cities at a velocity of 120 miles/hr, what is the distance between the two cities?
Answers
Answer:
120 mph is 193.1 km/hrs.
distance is s = vt.
193.1*3.5 = 675.85 km
Answer:
420 miles
Explanation:
Time: 3.5 hrs
Velocity: 120 miles/hr
Now Distance= Speed × Time
Distance = 3.5 × 120 = 420 miles
physical sciences march test New towns law and
Answers
Answer:
What are you asking
Explanation:
Answer:
What are you asking write I don't understand
Which is the right answer
A
B
C or
D
Answers
Answer:
B
Explanation:
Density=mass/volume
Density=8.5g/17mL
Density=0.5 g/mL
An object has a mass of 8.5 g and a volume of 17 mL, then the density will be 0.5 g/mL. The correct option is b.
The density of matter is a physical quantity that indicates how much mass is contained within a particular volume.
It is defined as a substance's mass per unit volume. In other words, density quantifies how tightly packed a substance's particles are.
We know that:
Density = Mass / Volume
Density = 8.5 g / 17 mL
Simplifying the calculation:
Density = 0.5 g/mL
Therefore, the density of the object is 0.5 g/mL. So, the correct answer is option b. 0.5 g/mL.
For more details regarding density, visit:
https://brainly.com/question/29775886
#SPJ2
How much heat is required to raise 100 grams of water (c= 4.18) by 5 degrees Celsius?
Answers
Answer:
Heat capacity, Q = 2090 Joules.
Explanation:
Given the following data;
Mass = 100 grams
Specific heat capacity = 4.18 J/g°C.
Temperature = 5°C
To find the quantity of heat required;
Heat capacity is given by the formula;
[tex] Q = mct[/tex]
Where;
Q represents the heat capacity or quantity of heat.
m represents the mass of an object.
c represents the specific heat capacity of water.
t represents the temperature of an object.
Substituting into the formula, we have;
[tex] Q = 100*4.18*5 [/tex]
Heat capacity, Q = 2090 Joules.
What would happen if you combine vinegar with baking soda (NaHCO3), which gives off OH– ions in water, and why? What kind of substances would be produced? (This is middle school not high school)
Answers
Answer:
Explanation:
When vinegar and baking soda are first mixed together, hydrogen ions in the vinegar react with the sodium and bicarbonate ions in the baking soda. The result of this initial reaction is two new chemicals: carbonic acid and sodium acetate. The second reaction is a decomposition reaction.
Brainliest for correct answer :)
Answers
Answer:
The weight of an average person on the Earth is 80kg
but in the picture it shows that the person weight 120 kg
Please mark as brainliest if answer right
Have a great day, be safe and healthy
Thank u
XD
Answer:
the weight is 1200 newtons since 1 Kg is equal to 10 Newtons
What is related to the force that causes electric charges to flow.uses answers below
Answers
Answer:
Im going to say voltage. It matches with my notes but it says voltage difference so i hope this helps!
Explanation:
Do energy drinks actually provide energy?
Answers
Answer:
Most energy drinks contain large amounts of caffeine, which can provide a temporary energy boost. Some energy drinks contain sugar and other substances. The boost is short-lived, however, and may be accompanied by other problems.
Explanation:
Answer:
kinda
Explanation:
Most energy drinks contain large amounts of caffeine, which can provide a temporary energy boost. Some energy drinks contain sugar and other substances. The boost is short-lived, however, and may be accompanied by other problems.
An incident light ray hits a plane surface at 20 degrees (hint: remember where the angle is measured from). What is the angle between the incident and reflected rays? So is it 20 degrees or 40 degrees
Answers
Answer:
[tex]40^{\circ}[/tex]
Explanation:
The incident angle is [tex]20^{\circ}[/tex] so the reflected ray will also be [tex]20^{\circ}[/tex].
The normal divides the angle between the incident and reflected ray. So, the angle between them would be
[tex]\text{Incident angle}+\text{Reflected angle}=20+20=40^{\circ}[/tex]
So, the angle between the incident and reflected rays is [tex]40^{\circ}[/tex].
This type of soil is found in warm, humid climates. Question 4 options: pedocal laterite pedalfer humus
Answers
Answer:
Laterite is your correct answer
Explanation:
Well i took the quiz and made a %100 meaning i am correct.
The laterite soil is found in warm, humid climates
What are Laterite soil?A variety of rocks weathered under highly oxidising and leaching circumstances to form laterite soil, which is present in the soil layer and is rich in iron oxide.
Given data ,
Let the soil be represented as A
Now , the soil is found in warm, humid climates
The laterite soil is is rich in iron and aluminium, are assumed to have developed in hot, humid tropical climes. Because to the substantial concentration of iron oxide, nearly all laterites have a rusty-red colour.
They develop as a result of prolonged, intensive erosion of the underlying rock material, which most frequently takes place during periods of high temperatures and heavy precipitation that alternate with periods of dry weather.
Hence , Laterite is the type of soil is found in warm, humid climates.
To learn more about laterite soils click :
https://brainly.com/question/10986021
#SPJ6
(FOR SCIENCE)fill in the blank with the words ok the top!!!!!
Answers
Question 1 is alike for first blank and increases for second
Un auto de 1000 kg que lleva una velocidad de 72 km/h se detiene en una distancia de 100 metros cuando se le aplican los frenos. (a) ¿Cuál es la fuerza constante producida por los fre. Nos? (b) Con esta fuerza, ¿cuál seria la distancia de frena do si la velocidad hubiera sido de 36 km/h?
Answers
Answer:
a) F = 2000 N , B) x = 25 m
Explanation:
a) To solve this exercise we can use the relationship between work and kinetic energy
W = ΔK
The job is
W = -F x
the negative sign is because the force of the brakes is contrary to the movement
as the car stops its final kinetic energy is zero
K = ½ m v²
let's substitute
- F x = 0 - ½ m v²
F = ½ m v² / x
Let's reduce the magnitudes to the SI system
v = 72 km / h (1000m / 1km) (1 h / 3600 s) = 20 m / s
let's calculate
F = ½ 1000 20²/100
F = 2000 N
b) x = ½ mv2 / F
let's slow down to the SI system
v = 36 km / h = 10 m / s
let's calculate
x = ½ 1000 10²/2000
x = 25 m
Momentum is mass times velocity, so another way to think of momentum is ____ in motion.
inertia
weight
acceleration
velocity
Answers
Answer: inertia
i don't know just want points .-.
sorry
The cornering performance of an automobile is evaluated on a skid pad, where the maximum speed that a car can maintain around a circular path on a dry, flat surface is measured. Then the centripetal acceleration, also called the lateral acceleration, is calculated as a multiple of the free-fall acceleration g. The main factors affecting the performance of the car are its tire characteristics and suspension system. A Dodge Viper GTS can negotiate a skid pad of radius 61.0 m at 86.5 km/h. Calculate its maximum lateral acceleration.
Answers
Answer:
0.04g
Explanation:
Since it lateral acceleration is is its centripetal acceleration, the centripetal acceleration, a is given by
a = v²/r where v = speed of Dodge Viper GTS= 86.5 km/h = 86.5 × 1000 m/3600 s = 24.03 m/s and r = radius of skid pad = 61.0 m.
So, a = v²/r
= 24.028 m/s ÷ 61.0 m
= 0.394 m/s²
So, its maximum lateral acceleration is 0.394 m/s². Since g = acceleration due to gravity = 9.8 m/s²
a/g = 0.394 m/s² ÷ 9.8 m/s² = 0.04
So, a = 0.0402g
a ≅ 0.04g
A new piece of exercise equipment has been added to your gym, and you try it out. To use this machine, you lie horizontal on a mat with your feet against a platform perpendicular to the mat. The platform is held by a stiff spring that is compressed when the platform moves. Your workout invovles compressing the spring by pushing on the platform with your feet. After testing compressions of the equipment, you determine that you must do 85.0 J of work to compress the spring a distance 0.170 m from its uncompressed length.What magnitude of force must you apply to hold the platform stationary at the final distance given above
Answers
Answer:
500 N
Explanation:
Since the work done on the spring W = Fx where F = force applied and x = compression length = 0.170 m (since the spring will be compressed its full length when the force is applied)
Since W = 85.0 J and we need to find F,
F = W/x
= 85.0 J/0.170 m
= 500 N
So, the magnitude of force must you apply to hold the platform stationary at the final distance given above is 500 N.