Please Hurry!!!!!!!!!!!! Due tomorrow



6. Acetylene gas (C2H2) reacts with oxygen to produce carbon dioxide and water. When

of acetylene is reacted with O2, 18. 5 g of water is formed.

2 C2H2 (g) + 3 O2 (g) - 2 CO2 (g) + 2 H20 (1)

a) What type of reaction is this?

b) What is the percent yield of this reaction?

The pH of the solution obtained by dissolving two extra-strength aspirin tablets in 270 mL of water is approximately 3.54.

pH is a measure of the acidity or (alkalinity) of a solution. It is defined as the negative logarithm of the hydrogen ion (H+) concentration in moles per liter (mol/L) in an aqueous solution. The pH scale ranges from 0 to 14, with 7 being neutral pH. Solutions with a pH less than 7 are considered acidic, while solutions with a pH greater than 7 are considered basic or alkaline.

To calculate the pH of a solution containing acetylsalicylic acid (aspirin), we need the concentration of the acid in the solution. Each extra-strength aspirin tablet contains 450 mg of acetylsalicylic acid, so dissolving two tablets in 270 mL of water gives a total concentration of 2 × 450 mg / 270 mL = 1667 mg/mL.

Next, we need to convert the concentration to moles. Acetylsalicylic acid has a molecular weight of 180.16 g/mol, so the number of moles in the solution is 1667 mg / 180.16 mg/mol = 9.24 x [tex]10^-{4}[/tex] moles.

The pKa of acetylsalicylic acid is 3.5, so at a pH of 7.0, the majority of the acetylsalicylic acid will exist in its acidic form (as the acetylsalicylic acid anion). The concentration of acetylsalicylic acid in its acidic form can be calculated using the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A^-]/[HA])[/tex]

Where [tex][A^-][/tex]is the concentration of acetylsalicylic acid anion and [HA] is the concentration of acetylsalicylic acid. Rearranging the equation and substituting the values we have, we get:

[tex]log([A^-]/[HA]) = pH - pKa[A^-]/[HA] = 10^(pH - pKa) = 10⁽⁷⁻³°⁵⁾ = 316.23[A^-] = 316.23 × 9.24 x 10⁻⁴ = 2.92 x 10⁻⁴ M[/tex]

Finally, the pH of the solution can be calculated from the concentration of acetylsalicylic acid anion:

[tex]pH = -log([A^-]) = -log(2.92 x 10⁻⁴) = 3.54[/tex]

So, the pH of the solution obtained by dissolving two extra-strength aspirin tablets in 270 mL of water is approximately 3.54.

To know more about Henderson-Hasselbalch equation, visit:

brainly.com/question/13423434

#SPJ4

When two different air masses collide, their difference in temperature, humidity, and air pressure can create a boundary between them, called a front.

When two different air masses collide, their difference in temperature, humidity, and air pressure can create a boundary between them, called a front.

This boundary separates the two air masses and often results in significant weather changes, such as precipitation and strong winds, as the denser, cooler air mass displaces the lighter, warmer air mass.

The passage of a front can bring about changes in the weather, as the leading edge of the cooler and denser air replaces the warmer air. The type of front can be characterized by its movement and the temperature changes it brings, and they are classified into four main types:

Learn more on air fronts here https://brainly.com/question/508529

#SPJ1

A food chain are interconnected in the sense that it shows a single pathway from the producers to the consumers and  the way energy flows in this pathway.

This refers to a linear sequence of organisms where nutrients and energy is moved from one organism to the other. This occurs when one organism consumes another organism.

The food chain starts with the producer organism, follows the chain and ends with the decomposer organism. m for survival. For example Grass (Producer) —–Goat (Primary Consumer) —– Man (Secondary consumer).

Learn more about food chain on

https://brainly.com/question/1807825

#SPJ1

When the semi-liquid material near the core is heated at high temperatures, it becomes less dense and rises. As it rises, it cools and becomes more dense, eventually sinking back down towards the core.

Heat is transferred through the currents in Earth's mantle due to a process known as convection. In this process, heat is transferred by the movement of a fluid. In the mantle, the semi-liquid material acts as a fluid, which constantly moves from areas with high temperatures near the core to areas with cooler temperatures near Earth's surface.

This constant movement of semi-liquid material, which is driven by the differences in temperature helps to distribute heat evenly throughout the mantle also, it prevents any localized hotspots from developing.

Thus, the convection currents in the mantle play a critical role in controlling the transfer of heat within the earth and helps to regulate the overall thermal energy balance of the planet earth.

To know more about earth's mantle here

https://brainly.com/question/30611692

#SPJ4

Examining population size, density, and distribution together give you a better understanding of a population than looking at these characteristics separately because these variables play a role in how the ecosystem adjusts to the growing population.

What is population density, and how does it work?

The average population size per unit of area or volume is known as population density. A colony of 100 insects, for instance, has a density of 1 insect per square meter and occupies an area of 100 square meters.

Numerous creatures' location, development, and migration can all be described using population density. The share of residents by different regions of a country is known as the national population distribution. The quantity of people within a broadly defined geographic area is referred to as the population size.

To learn more about ecosystem use link below:

https://brainly.com/question/1514975

#SPJ1

The molar mass of HCl is 36.46 g/mol, and the molar mass of H₂O is 18.02 g/mol.

What is molar mass?

Molar mass is a physical property of a substance, defined as the mass of a given substance divided by its amount of substance in moles. It is usually expressed in units of grams per mole (g/mol). Molar mass is used to calculate the mass of a particular substance from its molar quantity, or to calculate the quantity of a particular substance from its mass.

In order to calculate the number of moles of HCl required to produce 180. g of water, we must first calculate the number of moles of H2O that are produced. Since the molar mass of H₂O is 18.02 g/mol, we can divide 180. g by 18.02 to get the number of moles produced:

180. g / 18.02 g/mol = 10.00 moles of H₂O

Now, since the reaction is 1:1 (1 mole of HCl for 1 mole of H₂O), we can simply multiply the number of moles of H₂O produced (10.00 moles) by 1 to get the number of moles of HCl required:

10.00 moles H₂O × 1 mole HCl/1 mole H₂O = 10.00 moles HCl

Therefore, in order to produce 180. g of water, 10.00 moles of HCl are required.

To learn more about molar mass
https://brainly.com/question/30459969

#SPJ4

A chemist employed by an airplane manufacturer investigates new adhesives for the purpose of building airplanes without rivets. So, she is engaged in applied research.

Research means findings and discoveries. A researcher can carry out either basic research or applied research. Every research topic begins with an explanation of the aim of the investigation, which describes identifying the research method or the strategy used to carry out the research.

Applied research is a non-systematic approach to solving certain difficulties or problems . These concerns or problems may affect a person, a group, or the entire society. It is referred to as "non-systematic" because it directly aim at seeking solutions.

It makes use of the existing scientific instruments to identify solutions. So, it is frequently referred to as a "scientific process".

The three different categories in research are as follows: Action research, Research and Development and evaluation research.

To know more about research here

https://brainly.com/question/30353052

#SPJ4

The Calvin cycle is a series of reactions that take place in the stroma of chloroplasts in photosynthetic cells, and it is responsible for converting carbon dioxide (CO2) into sugars. The cycle consists of three phases: fixation, reduction, and regeneration.

In the fixation phase, CO2 is added to ribulose-1,5-bisphosphate (RuBP) to form a six-carbon intermediate.

In the reduction phase, the six-carbon intermediate is then reduced to two molecules of glyceraldehyde-3-phosphate (G3P). This process requires energy, which is provided by ATP and NADPH, the high-energy molecules produced in the light reactions.

In the regeneration phase, the two G3P molecules are converted back into RuBP, completing the cycle. This allows the Calvin cycle to continue, and the sugars produced can be used for energy and to build more complex compounds.

In summary, the Calvin cycle converts CO2 into sugars through a series of reactions that require energy from ATP and NADPH produced in the light reactions.

Learn more about photosynthetic cells:

brainly.com/question/13833620

#SPJ4

Summarize the reactions occurring in the three phases of the Calvin cycle (fixation, reduction, regeneration). What molecules produced in the light reaction provide energy for these reactions? (RuBP, CO2, 3-phosphoglycerate, glyceraldehydes-3-phosphate (G3P))

Answer:

Explanation:

If a rock is 5 half-lives old, it means that the fraction of the original radioactive material remaining is (1/2)^5 = 1/32. This also means that the fraction of stable product in the rock is 1 - 1/32 = 31/32.

If the total mass of the rock is 16 grams, we can calculate the mass of the stable product as follows:

mass of stable product = (31/32) * 16 grams

= 15.5 grams

Therefore, the mass of stable product in the rock is 15.5 grams.

Dissolve 132 g of lead(ii) acetate in 2.20 l of air. Then the molarity of the solution is 0.184 mol/L

Molarity in the concentration of a solution is known as molar concentration or molarity with its symbol M. Molarity is used to get the concentration of a solution quantitatively.

The mass of lead acetate Pb(C2H3O2)2 = 132 g

We must first find the molarity of lead acetate:

n = mass/Mr

n = 132/325.29

n = 0.405 M

The moles of lead acetate is 0.405 mol

Then the molarity of the solution is

M = n/V

M = 0.405/2.20

M = 0.184 mol/L

Learn more about the molarity at https://brainly.com/question/14469428

#SPJ4

The emitted fluorescent light has longer wavelength and lower energy because it lost some energy to the solvent molecules and some fraction of energy is dissipated as heat.

A material that has absorbed light or other electromagnetic radiation will emit light when it undergoes fluorescence. It has a luminescent quality. Most of the time, the emitted light has a lower photon energy than the absorbed radiation because it has a longer wavelength.

Fluorescence can be seen when the emitted light is in the visible spectrum while the absorbed radiation is in the ultraviolet (UV) region of the electromagnetic spectrum, which is invisible to the human eye.

The fluorescent photons have lower energy. The non-radiative  vibrational transitions taking place in between causes dissipation of energy as heat and some energy is transferred to the solvent molecules.

Find more on fluorescence :

https://brainly.com/question/14892301

#SPJ1

The rate constant k for the overall chemical reaction in terms of k_1, k_2 is Equal.

A chemical response is a system that results in the chemical transformation of one set of chemical materials to another. Classically, chemical reactions embody adjustments that best contain the positions of electrons inside the forming and breaking of chemical bonds between atoms, and not using an exchange to the nuclei (no change to the factors present), and can frequently be described by way of a chemical equation. Nuclear chemistry is a sub-area of chemistry that includes the chemical reactions of risky and radioactive factors in which each digital and nuclear change can arise.

The substance (or substances) to begin with worried in a chemical response are called reactants or reagents. Chemical reactions are commonly characterized by a chemical change, and they yield one or extra products, which usually have residences one of a kind from the reactants.

To learn more about Reaction visit here

brainly.com/question/13440548

#SPJ4

a. The moles of H3PO4 would be 0.24 mol

b. The grams of H3PO4 would be 48.02 grams

c. The grams of tetraphosphorus decoxide would be 14.2 grams

d. The moles of H3PO4 would be 3.59 mol

The balanced equation of the reaction is as follows:

[tex]P_4O_{10}(g) + 6 H_2O(l) -- > 4 H_3PO_4(aq)[/tex]

The mole ratio of water and H3PO4 = 3:2

Mole of 6.46 grams of water = 6.46/18 = 0.36 mol

Equivalent mole of H3PO4 = 2/3 x 0.36 = 0.24 mol

With 0.730 moles of water, the equivalent mole of H3PP4 will be: 2/3 x 0.730 = 0.49 moles

Mass of 0.49 mol H3PO4 = 0.49 x 98 = 48.02 grams

Mole ratio of tetra phosphorus decoxide and water = 1:6

Mole of 4.78 grams of water = 4.78/18 = 0.27 mol

Equivalent mole of tetra phosphorus decoxide = 0.27/6 = 0.05 mol

Mass of 0.05 mol tetra phosphorus decoxide = 0.05 x284 = 14.2 grams

Mole ratio of tetraphosphorus decoxide and H3PO4 = 1:4

Mole of tetraphosphorus decoxide = 0.898

Equivalent mole of H3PO4 = 0.898 x 4 = 3.59 mol

More on stoichiometric problems can be found here: https://brainly.com/question/14301905

#SPJ1

Answer:

Yeah you are right great job

The mass of oxygen gas that will react with 50 grams of ammonia gas is 57.28 grams.

Stoichiometry is the quantitative relationship between the reactants and products of a specific reaction or equation.

According to this question, ammonia gas reacts with oxygen gas to produce nitrogen gas and water.

Based on the reaction, 1 mole of ammonia gas reacts with 1 mole of oxygen.

50 gram of ammonia gas is equivalent to 1.79 moles

1.79 moles will react with 1.79 moles of oxygen gas.

mass of oxygen gas = 1.79 moles × 32g/mol = 57.28 grams.

Learn more about stoichiometry at: https://brainly.com/question/29775083

#SPJ1

They covered one plant with a cardboard box and left the other plant uncovered. The uncovered plant will grow and covered will not grow.

The experiment is the cornerstone of the scientific process, which is a methodical approach to learning about the world around you. Although some experiments are conducted in laboratories, an experiment can be conducted anywhere, at any time.

Beth and Charlie did an experiment with plants. For this experiment, they got two plants that were the same kind, that had the same kind of soil, and that were the same size. Then, they left both plants next to the window and gave both plants the same amount of water every day. They covered one plant with a cardboard box and left the other plant uncovered. The uncovered plant will grow and covered will not grow.

Therefore, the uncovered plant will grow and covered will not grow.

To know more about experiment, here:

https://brainly.com/question/11256472

#SPJ1

The complete balanced chemical equation is:

2[tex]Au[/tex] + 6[tex]HCl[/tex] (aq) → 2[tex]Au[/tex][tex]Cl_{3}[/tex] (aq) + 3[tex]H_{2}[/tex] (g)

Chemical equations provide the reactants, products, and mole ratios of each component involved in the reaction and are a symbolic depiction of a chemical reaction. The reactants are written on the left side of the arrow, while the products are written on the right side, using chemical symbols and formulas. The coefficients in front of the formulas show the number of molecules involved and the arrow shows the reaction's direction. Chemical equations serve to explain the underlying chemical processes and forecast the volume of products that will be created in a reaction. They are a crucial tool in the study of chemistry and are essential to chemical reactions and their uses in a variety of sectors.

To know more about chemical equations, check out:

https://brainly.com/question/5880605

#SPJ1

All the living organisms need water to survive in the earth. The transport of water can be considered as a solution of water supply on earth. Most of the people suffers from water scarcity.

Water is regarded as the universal solvent and plays an important role in the survival of all living organisms. The preservation of water mainly refers to protect and control the use of water and its associated resources.

It is very important to preserve water. Because everyday the population is increasing and the water resources are reducing. The preservation of water helps us to supply large amount of water for longer usage.

Some methods to preserve water are:

Water supply means providing water to the public. Here water is supplied through pipes, pumps, etc. To make healthy individuals in our society transport of water is essential.

To know more about water, visit;

https://brainly.com/question/23469916

#SPJ1

Liver contains digestive enzymes to break down harmful substances.

Digestive enzymes: Digestive enzymes are a group of enzymes which break down polymeric macromolecules into their smaller building blocks, in order to facilitate their absorption into the cells of the body.

Digestive enzymes are found in the digestive tracts of animals (including humans) as well as in the tracts of carnivorous plants, where they aid in the digestion of food, as well as inside the cells, especially in their lysosomes, where they function to maintain the cellular survival.

Liver: The liver contains various digestive enzymes, such as liver alcohol dehydrogenase, which helps to break down toxic substances such as alcohol and drugs, and convert them into less harmful substances that can be excreted from the body.

To know more about Digestive enzymes here

https://brainly.com/question/30312574

#SPJ4

The most effective in removing ink stains from a white blouse by comparing the degree to which each solvent is able to remove the stain. The solvent that results in the least visible ink stain will be considered the most effective.

A solvent in chemistry is a liquid that is used to dissolve a solute (another substance) to form a solution. The solvent acts as the medium in which the solute is dissolved, allowing it to be dispersed evenly throughout the solution. The choice of solvent can greatly impact the solubility, reactivity, and overall properties of the solution.

There are many types of solvents, including polar and non-polar solvents. Polar solvents have a positive and negative end and are able to dissolve polar compounds. An example of a polar solvent is water. Non-polar solvents, on the other hand, do not have a polar structure and are able to dissolve non-polar compounds. An example of a non-polar solvent is hexane.

To learn more about Solvent visit here:

brainly.com/question/14797683

#SPJ4

The displacement method is the sole way to determine the iron bolt's volume. Aluminium bar volume is 15.52 cm3. The rod's volume is 23.8 cm3.

Describe loudness. The area occupied by an object is referred to as its volume. We are aware that based on the object's characteristics, there are various approaches to determine its volume. If the object is solid, we have two options: we can look at the solid's dimensions or we can use the solid's dimensions. The actual technique we choose to employ is unique to the object whose volume we want to measure. in order to determine the aluminium bar's volume; Volume equals length, width, and height. Volume is equal to 9.7 * 1.6 * 1.0, or 15.52 cm3. in order to determine the rod's volume; Volume equals Area * Length.

Learn more about Volume here:

https://brainly.com/question/28694532

#SPJ4

By the Help of  Ideal gas laws, The new volume of the gas at a constant temperature when the pressure is changed from 4.22 atm to 1.202 atm is 12.94 L.

The Ideal Gas Law, PV = nRT, which takes P as the pressure, V as the volume, n as the number of moles, R as the gas constant, and T as the temperature, can be used to explain the relationship between pressure, volume, and temperature. If we keep the temperature constant, we can rearrange the equation to solve for the new volume:V1 = (P1 × V2) / P2, where V1 is the new volume and P1 and P2 are the initial and final pressures, respectively. Plugging in the values from the problem, we get:V1 = (4.22 atm × V2) / 1.202 atm = 3.41 L × (4.22 atm / 1.202 atm) = 12.94 LSo the new volume of the gas at a constant temperature when the pressure is changed from 4.22 atm to 1.202 atm is 12.94 L.

Learn more about Ideal gas:

brainly.com/question/28257995

#SPJ4

Deforestation - destroys natural carbon sinks leading to more CO₂ in the air

Burning fossil fuels - primary cause of human-created carbon emissions

Waste disposal in landfills - emits methane from decomposing waste disposal in lands​

Greenhouse effects refer to the effects caused by the greenhouse gases' absorption of solar radiation to raise the temperature of the atmosphere. The greenhouse gases include carbon dioxide, methane, water vapor, etc.

Deforestation destroys forests which serve as carbon dioxide sinks. The burning of fossil fuels leads to the emission of carbon dioxide and waste disposal in landfills is a source of methane gas. All these gases help create the greenhouse effect.

More on greenhouse effects can be found here: https://brainly.com/question/13706708

#SPJ1

Match the human activity with how it intensifies the greenhouse effect.

deforestation

burning fossil fuels

waste disposal in landfills

primary cause of human-created

carbon emissions

destroys natural carbon sinks,

leading to more co, in the air

emits methane from decomposing

matter

The greater the speed of gas particles in a container, the higher the pressure of the gas.

This is because the pressure is directly proportional to the kinetic energy of the gas particles, and the kinetic energy of a gas particle is directly proportional to its speed squared. The pressure of a gas is usually expressed as a force per unit area, and can be calculated by multiplying the average kinetic energy of the gas particles by the number of particles per unit volume. Since the kinetic energy of a particle is proportional to the square of its velocity, if we double the velocity of the gas particles, we will see an increase in the average kinetic energy and thus an increase in the pressure. Thus, the greater the speed of gas particles in a container, the higher the pressure of the gas.

Learn more about gas here:

https://brainly.com/question/3637358

#SPJ4

The compound's empirical formula is [tex]Na_3P_1O_4[/tex].

We must establish the relative ratios of the components in the compound in order to get the empirical formula for the compound.

The simplest whole-number ratio of the various atoms in a compound is represented by an empirical formula. The molecular formula displays the precise quantity of various atom types present in a compound's molecule.

The masses of Na, P, and O will first be converted to moles:

Na: 6.9g / 23g/mol = 0.3 mol

P: 3.15 g / 31 g / mol = 0.1 mol

O: 6.4g/16g/mol = 0.4 mol

The relative ratios will then be obtained by dividing each value by the smallest value (0.1 mol for P) as follows:

P: 0.1 mol/0.1 mol = 1,

Na: 0.3 mol/0.1 mol = 3,

O: 0.4 mol/0.1 mol = 4.

So the formula is [tex]Na_3P_1O_4[/tex]

To learn more about  Empirical formula :

https://brainly.com/question/8676129

#SPJ4

Boiling point of the solution prepared by dissolving 12.30 g of ordinary sugar (sucrose, c12h22o11, 342.3 g/mol) in 35.00 g of water is 100.5°C.

To calculate the boiling point of the solution, we need to determine the boiling point elevation caused by the addition of sucrose to the water. The boiling point elevation of a solution is proportional to the molality (moles of solute per kilogram of solvent) of the solute.

First, let's calculate the molality of the solution:

12.30 g sucrose / 342.3 g/mol = 0.0359 moles sucrose

35.00 g water / 1000 g/kg = 0.035 kg water

Molality = 0.0359 moles / 0.035 kg = 1.03 mol/kg

Next, we can use the formula for boiling point elevation to calculate the boiling point of the solution:

ΔTb = Kb * molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for water (0.512 K kg/mol), and molality is the molality of the solution.

ΔTb = 0.512 K kg/mol * 1.03 mol/kg = 0.529 K

Finally, we can add the boiling point elevation to the boiling point of pure water (100°C) to obtain the boiling point of the solution:

Boiling point of solution = 100°C + ΔTb = 100°C + 0.529 K = 100.529°C (approximately 100.5°C)

So, the boiling point of the solution is 100.5°C.

To  know more about molality please refer:

https://brainly.com/question/26921570

#SPJ4

A solid precipitate of 27.84 g of HgS is formed.

First, write down a properly balanced equation for the reaction taking place.

Hg(NO3)2(aq) + Na2S(aq) ==> HgS(s) + 2NaNO3(aq) ... equilibrium equation

Then find out which reactant is limiting.

Mol Hg(NO3)2 present 65.21 g x 1 mol/324.60 g = 0.200 mol

Moles of Na2S present = 9.718 g x 1 mol/78.045 g = 0.12 mol

Since they react with 1:

At 1 molar ratio, Na2S is clearly limiting and determines the amount of HgS formed.

Grams of HgS precipitate formed = 0.12 mol Na2S x 1 mol HgS/mol Na2S x 232.66 g/mol = 27.84 g HgS  

Learn more about precipitate

brainly.com/question/29762381

#SPJ4

To determine the mass percent of FeO in the original mixture, we need to balance the equation for the reaction that takes place when the mixture is heated. The reaction between Fe3O4 and FeO to form Fe2O3 is as follows:

Fe3O4 + FeO --> Fe2O3

Next, we'll use the law of conservation of mass to balance the equation. According to this law, the total mass of the reactants must equal the total mass of the products.

We'll start by assuming that the number of moles of FeO in the mixture is 1.0. Then, the number of moles of Fe3O4 can be calculated as follows:

4.148 g Fe2O3 / (71.844 g/mol) = 0.058 mol Fe2O3

0.058 mol Fe2O3 / (1 mol FeO / 2 mol Fe2O3) = 0.116 mol FeO

0.116 mol FeO x (55.845 g/mol) = 6.468 g FeO

So, the mass of FeO in the original mixture was 6.468 g and the mass of Fe3O4 was 3.854 g - 6.468 g = -2.614 g.

The mass percent of FeO in the original mixture can be calculated as follows:

(6.468 g FeO / (6.468 g FeO - 2.614 g Fe3O4)) x 100% = 71.12%

So, the mass percent of FeO in the original mixture was 71.12%.

To know more about law of conservation of mass, visit the link given below:

https://brainly.com/question/2890660

#SPJ4