Please helpppp with my chemistry homework

The amount of energy required to evaporate a given number of moles of pentene is given by the formula:

ΔHvap = energy/mole Rearranging the formula gives:

Mol = Energy/ΔHvap Substituting the given values, we get:

mol = (88 J) / (29.82 kJ/mol) = 0.0029488 mol Rounding to the correct number of significant digits gives:

Moles = 0.003 Moles

Thus, 0.003 moles of pentene can be evaporated while supplying 88 J of energy.

What is evaporation?

When a liquid becomes a gas, this process is called evaporation. If you boil water in a pot, you can observe the evaporation. Evaporation is done in two ways:evaporation and boiling.  

What is the difference between vaporize and vaporize?

Evaporation is defined as a phase transition of a compound or element that occurs during the boiling or sublimation process. Evaporation is just a type of evaporation that normally occurs at temperatures below the boiling point.  

To know more about pentene visit:

brainly.com/question/30354757

#SPJ1

4.39×10²³ atoms are present in  0.73 mol of Bromine. Bromine exists in a liquid form of state of matter.

Bromine was found in 1826 in the dregs (bitterns) from the production of sea salt in Montpellier by the French scientist Antoine-Jérôme Balard.

By running chlorine through with an aqueous phase of the leftovers containing magnesium bromide, he was able to release the element. The substance was distillated with manganese dioxide as well as sulfuric acid, resulting in crimson vapours that condensed into a black liquid which is bromine.

number of atom = mole ×6.022×10²³

                           = 0.73 ×6.022×10²³

                          =4.39×10²³

Therefore, 4.39×10²³ atoms are present in  0.73 mol of Bromine.

To learn more about bromine, here:

https://brainly.com/question/1952132

#SPJ1

This process is known as frost wedging or freeze-thaw weathering. It occurs when water gets into cracks and crevices in rocks and then freezes, expanding and eventually forcing the rock to split apart.

What is wedging?

Wedging is a technique used in woodworking to join two pieces of wood together. It is done by driving a wedge (usually a metal wedge) between the two pieces of wood. The wedge then forces the wood apart, creating a tight fit. This is a great way to connect two pieces of wood without the need for nails or screws. Wedging is a strong and durable joint, making it a popular choice for woodworking projects. It can also be used to create texture in a material, by creating a pattern of cracks. Wedging is a traditional technique that has been used by artisans and sculptors for centuries.

To learn more about wedging
https://brainly.com/question/8652788

#SPJ4

1) He is performing serology

2) Cast-off pattern

3) If the mother is Rh negative and her child is Rh positive she will form antibodies that may kill her second child

Serology is the scientific study of blood serum and other bodily fluids to detect the presence of specific antibodies or antigens.

This is usually done through a laboratory test called a serological assay, which is used to diagnose various infectious diseases, autoimmune disorders, and other medical conditions.

Serological tests work by detecting the presence of antibodies in a patient's blood serum or other bodily fluids.

Learn more about serology:https://brainly.com/question/4522590

#SPJ1

If has an atomic mass of 68.926 amu, has an atomic mass of 70.925 amu, and the atomic mass of gallium is 69.723 amu, the percent abundance of 70Ga is 101.68%.

To find the percent abundance of an isotope, you need to determine its relative abundance compared to the total amount of the isotopes present. Here's how you can do it for the isotope 70Ga:

Calculate the fraction of 70Ga in the sample:

fraction of 70Ga = (mass of 70Ga) / (atomic mass of Gallium)

fraction of 70Ga = (70.925 amu) / (69.723 amu)

fraction of 70Ga = 1.0168

Convert the fraction to a percentage:

percentage of 70Ga = (fraction of 70Ga) * 100

percentage of 70Ga = (1.0168) * 100

percentage of 70Ga = 101.68%

To know more about isotope

https://brainly.com/question/11680817

#SPJ4

The given statement, "the phenolate ion will appear this color under acidic conditions" is false because phenolphthalein is itself an acid.

Generally phenolphthalein is often used as an indicator in acid–base titrations in a chemical lab. For this kind of application, phenolphthalein  turns colorless in acidic solutions and pink in basic solutions.

Basically phenolphthalein is defined as an indicator or a chemical which changes color depending on whether it mixes with an acid or a base. It often turns purple when it meets something basic, such as ammonia; and stays colorless when it meets an acid like vinegar or a neutral substance like water.

Hence, the given statement is false.

Learn more about phenolphthalein from the link given below.

https://brainly.com/question/14804470

#SPJ4

The freezing point depression constant is another term for the cryoscopic constant. The cryoscopic constant is the change in the freezing point of a solvent per unit of solute concentration. It provides a measure of the depression of the freezing point of a solvent caused by the presence of a solute.

The cryoscopic constant is used to calculate the freezing point depression of a solution, which is the difference between the freezing point of the pure solvent and the freezing point of the solution.Freezing-point When less of one non-volatile material is added, the lowest temperature at which a substance freezes decreases, a process known as depression. Examples include mixing two solids, such as impurities into a finely powdered drug, or adding two liquids, such as alcohol or ethylene or propylene glycol to molten silver (used to make solder that flows at a lower temperature than the silver pieces being joined or in ice cream makers and for de-icing roads).

Learn more about freezing point depression constant here:

https://brainly.com/question/24020984

#SPJ4

A push or pull on a body produces acceleration and it is called the force. Its SI unit is Newton. Here the work done when 7n of force is use to push a stalled motorbike is 35 J.

The amount of energy that is transferred by the applied force in moving an object is defined as the work done. The product of magnitude of the force applied and the distance moved by the object in the direction of the force is the formula of work done.

W = F × d

Here F = Force,  d = distance moved in meter (m).

The SI unit of the work done is joule (J).

The given force is 7N and the distance moved by the object is 5m. Then the work done is:

W = 7 × 5 = 35 J

Thus the amount of work done is 35 J.

To know more about work done, visit;

https://brainly.com/question/14348686

#SPJ1

Your question is incomplete but most probably your full question was,

How much work is done when 7 N of force is used to push a stalled motorbike 5 m?

The percentage of chloride in the unknown sample is approximately 15.93%.

To calculate the percentage of chloride in the unknown sample, you can use the mass of silver chloride obtained to determine the number of moles of chloride in the original sample, and then convert that to a percentage.

First, calculate the number of moles of silver chloride by dividing the mass by its molar mass:

0.7332 g / 143.32 g/mol = 0.00513 mol AgCl

Next, calculate the number of moles of chloride in the original sample by assuming a 1:1 ratio of chloride ions to silver ions in the reaction:

0.00513 mol AgCl * 1 Cl- / 1 Ag+ = 0.00513 mol Cl-

Finally, divide the number of moles of chloride by the mass of the original sample and multiply by 100 to convert to a percentage:

(0.00513 mol Cl- / 0.3221 g) * 100 = 15.93%

So, the percentage of chloride in the unknown sample is approximately 15.93%.

To know more about molar mass

https://brainly.com/question/12127540

#SPJ4

The best way to take advantage of Catholic Schools Week is to volunteer and get involved in community events.

Catholic Schools Week is an annual celebration of Catholic education, typically held in the United States during the last week of January. To take advantage of this week, you can participate in the events and activities organized by your local Catholic school or parish.

Volunteer at your local Catholic school to help with events, projects, or activities. You can also offer to mentor students or assist teachers. Catholic Schools Week often includes events like open houses, talent shows, and sports games.

Find out more on Catholic Schools at https://brainly.com/question/16953262

#SPJ1

The placement of a plastic coating (a, b, c, or d below) that could be used to prevent galvanic corrosion would depend on the type of plastic coating being used and the specifics of the joined copper and iron pieces that are exposed to salt water conditions.

Generally, a plastic coating should be applied to prevent any direct contact between the copper and iron pieces. Placement “a” and “b” could both be used, as they would create a barrier between the two pieces, while placement “c” and “d” would not be as effective because there would still be direct contact between the two pieces.

Learn more about galvanic corrosion:

https://brainly.com/question/20264260

#SPJ4

Answer: When foods are sufficiently dehydrated, microorganisms cannot grow and foods will not spoil.

yes

When compared to the initial nuclide, the alpha decay product: The answer is B. The atomic number of the product is two less than the atomic number of the original nuclide.

What is Alpha Decay?

A nuclear process known as "alpha decay" causes the parent nucleus to emit an alpha particle. The alpha particle is made up of two neutrons and two protons. There is a radioactive decay process known as "alpha decay" in which an atomic nucleus produces an alpha particle and radioactively decays into a separate atomic nucleus with a mass number reduced by four and an atomic number reduced by two.

Alpha decay reduces atomic mass by 4 and atomic number by 2.

To learn more about alpha decay, here

brainly.com/question/27870937

#SPJ1

The hydrogen bonds among water molecules endow water with the property of high surface tension.

Surface tension is a property of the surface layer of a liquid that causes it to behave as if it has a thin, elastic skin. The hydrogen bonds between water molecules are relatively strong and result in the surface layer of water molecules having a higher cohesive force than the underlying liquid. This high cohesive force gives water its high surface tension, which allows it to form droplets, resist spreading out, and retain its shape.

In addition to high surface tension, the hydrogen bonds among water molecules also contribute to several other important properties of water, including its high boiling point, high heat of vaporization, and high heat capacity.

These properties make water an important solvent for many biological and chemical processes and help regulate temperature in living organisms.

learn more about surface tension: https://brainly.com/question/14530972

#SPJ1

The volume (in liters) of ethane gas at STP burned when 5259 KJ of heat is produced is 6.7 L

We shall begin our calculation by obtaining useful information from the balanced equation as shown below:

2C₂H₆(g) + 7O₂(g) -> 4CO₂(g) + 6H₂O(g) ΔH = -1559 KJ

From the balanced equation above,

1559 KJ of heat energy were obtained from 2 L of ethane, C₂H₆

With the above information, we shall determine the volume (in liters) of ethane, C₂H₆, needed to produce 5259 KJ of heat energy. Details below:

From the balanced equation above,

1559 KJ of heat energy were obtained from 2 L of ethane, C₂H₆

Therefore

5259 KJ of heat energy will be obtain from = (5259 × 2) / 1559 = 6.7 L of ethane, C₂H₆

Thus, the volume of ethane, C₂H₆ needed is 6.7 L

Learn more about volume:

https://brainly.com/question/9614052

#SPJ1

The equilibrium pressure of HCl is 0.175 atm.

The equation for the reaction can be written in terms of partial pressures:

P H₂ + P Cl₂ = 2P HCl

Since the initial pressures of H₂ and Cl₂ are 0.021 atm each, and x represents the change in pressure from the initial pressure, the initial pressure of HCl can be represented as 0.021 + x. The pressure of HCl at equilibrium can be represented as 2 (0.021 + x).

Calculated Kp using the following equation:

Kp = (P HCl)² / (P H₂ × P Cl₂)

Using the initial pressures and the equilibrium pressure, we can plug in the values and solve for x:

1.42 × 10⁵ = [(0.021 + x)²] / [(0.021)²]

x = 0.021 × sqrt(1.42 × 10⁵) - 0.021

x = 0.067 atm

So, the equilibrium pressure of HCl is 2 × (0.021 + 0.067) = 0.175 atm.

In this case, x is not small, so we cannot assume x is small. Instead, we solved for x using the equilibrium constant expression.

To know more about equilibrium pressure here

https://brainly.com/question/14929684

#SPJ4

No, 99% of Ca2+ cannot be precipitated by sulfate without precipitating Ag+.

Sulfate is an anion composed of sulfur and oxygen atoms, with the chemical formula SO4−2. It is a polyatomic anion that is the conjugate base of sulfuric acid, H2SO4. Sulfates are found in many natural minerals and in synthetic compounds. They are used in a variety of industrial applications, including in detergents, fertilizers, dyes, and pigments. Sulfates are also used in the production of paper, textiles, and pharmaceuticals. In addition to their industrial uses, sulfates are also released into the environment through natural processes, such as volcanic eruptions and weathering of rocks.

When Ca2+ and Ag+ are both present in a solution, they will both form insoluble sulfates, and the precipitation of Ca2+ will not be selective. The precipitation of either ion requires a large excess of sulfate ions to reach 99%.

To learn more about sulfate
https://brainly.com/question/3047839
#SPJ4

The balanced chemical equation for the combustion of octane (C8H18) is: C8H18 + 12.5O2 → 8CO2 + 9H2O

To calculate the mass of water produced, we first need to determine the amount of octane present in 1 gallon (3.8 L) of gasoline. The density of gasoline is around 0.7 g/mL, so 1 gallon (3.8 L) of gasoline would have a mass of approximately: 3.8 L * 0.7 g/mL = 2.66 kg = 2660 g

From the balanced chemical equation, we see that for every mole of octane burned, 9 moles of water are produced. To convert the mass of octane to the number of moles, we can use the molar mass of octane, which is approximately 114 g/mol: 2660 g / 114 g/mol = 23.4 mol

Therefore, the amount of water produced from the combustion of 1 gallon of gasoline would be: 23.4 mol * 9 moles H2O/1 mole C8H18 * 18 g H2O/mole = 3,741 g or 3.7 kg

So, approximately 3.7 kg of water would be produced from the combustion of 1 gallon (3.8 L) of gasoline.

You can read more about hydrocarbons at https://brainly.com/question/3551546

#SPJ4

Answer:

c.The Sun’s rays are perpendicular to the Equator, causing 12 hours of daylight on both Northern and Southern Hemispheres.

The rate of reaction is directly proportional to the rate of consumption of a reactant and its stoichiometric coefficient.

The rate of reaction refers to the change in the concentration of a reactant or product over time, and it is directly proportional to the stoichiometric coefficient of the reactant. For example, if a reactant has a stoichiometric coefficient of 2 in a reaction, it will be consumed twice as fast as a reactant with a coefficient of 1. The rate of reaction can be determined by measuring the change in concentration of the reactant over time and using the stoichiometry of the reaction to calculate the rate. This relationship is crucial in understanding how reactions proceed and how to control their speed by manipulating the concentration of reactants and products.

Learn more about stoichiometric coefficient here:

https://brainly.com/question/15047541

#SPJ4

Based on the graph given, for a stream traveling at 30 cm speeds up at 100cm, the maximum particle diameter it can carry is 0.05 mm.

The stream velocity required to carry a particle decreases as the particle size increases.

The Channel's Size and Shape Affect the Stream Velocity

Although the shape of the stream channel also affects water flow in a stream, the gradient of the stream is the main factor.

Discharge rises as a result of the increased cross-sectional area and velocity. The competency and capacity of the stream grow with discharge and velocity.

Learn more about stream velocity at: https://brainly.com/question/997601?source=archive

#SPJ1

To calculate the theoretical density of iron with its given parameters, you can use the formula:

density = (2 atoms/unit cell)(atomic weight)/[(4π/3)(radius)³].

Using the given values of 2 atoms/unit cell, an atomic weight of 55.85 g/mol , and a radius of 0.124 nm, we can calculate the theoretical density of iron to be 7.86 g/cm3, which is very close to the experimental value of 7.87 g/cm3.

This equation can be used to calculate the theoretical density of any substance, provided the number of atoms/unit cell, atomic weight, and radius are known. Additionally, the equation can be used to compare the theoretical density of a substance to its experimental density in order to assess the accuracy of the theoretical model.

Learn more about density :

https://brainly.com/question/1354972

#SPJ4

Hydrocarbon chain to which hydrogens have been added. A dehydration reaction type of reaction has occurred.

A chemical reaction is a method that leads to the chemical transformation of 1 set of chemical materials to any other. Classically, chemical reactions embody changes that handiest involve the positions of electrons in the forming and breaking of chemical bonds among atoms, with no alternative to the nuclei (no alternate to the factors gift), and can often be defined by a chemical equation. Nuclear chemistry is a sub-area of chemistry that entails the chemical reactions of risky and radioactive factors where each electronic and nuclear modification can occur.

The substance (or materials) to start with concern in a chemical response are referred to as reactants or reagents. Chemical reactions are normally characterized by a chemical exchange, and they yield one or greater merchandise, which normally have houses special from the reactants. Reactions regularly consist of a series of personal sub-steps, the so-known as primary reactions, and the facts on the precise direction of movement are part of the reaction mechanism.

To learn more about Reaction visit here:

brainly.com/question/17434463

#SPJ4

Calcium carbonate and sodium carbonate can be differentiated using a combination of qualitative tests and methods.

Here are a few ways to do so:

Reactivity with acid: Calcium carbonate reacts with an acid to produce carbon dioxide gas, while sodium carbonate does not.

Solubility: Calcium carbonate is poorly soluble in water, while sodium carbonate is highly soluble.

pH of aqueous solution: Calcium carbonate produces a neutral solution, while sodium carbonate produces a basic solution.

By performing these tests, you can determine which chemical is calcium carbonate and which is sodium carbonate. The test results will provide clues to the identity of the two chemicals, and a combination of results can be used to make a more confident conclusion.

Learn more about Calcium carbonate here:

https://brainly.com/question/13565765

#SPJ4

135 g of al are reacted with 601 g of fe2o3. 254.9 grams of al2o3 formed, and  there is 202.5 g of excess Fe2O3 left at the end of the reaction.

The balanced chemical equation(Fe2O3) is:

2Al + Fe2O3 → Al2O3 + 2Fe

moles of Al = 135 g / 26.98 g/mol = 5.00 mol

moles of Fe2O3 = 601 g / 159.69 g/mol = 3.77 mol

The mass of Al2O3 produced can be calculated as follows:

moles of Al2O3 = moles of Al / 2 (from balanced equation)

moles of Al2O3 = 5.00 mol / 2 = 2.50 mol

mass of Al2O3 = moles of Al2O3 x molar mass of Al2O3

mass of Al2O3 = 2.50 mol x 101.96 g/mol = 254.9 g

Therefore, 254.9 g of Al2O3 is formed in the reaction.

mass of excess Fe2O3 = moles of excess Fe2O3 x molar mass of Fe2O3

mass of excess Fe2O3 = 1.27 mol x 159.69 g/mol = 202.5 g

Therefore, there is 202.5 g of excess Fe2O3 left at the end of the reaction.

Learn more about balanced equation here:

https://brainly.com/question/12405075

#SPJ4

Lithium belongs to the group of the periodic table, specifically Group 1. Group 1 elements are commonly referred to as the "alkali metals".

Lithium is a chemical element with the symbol Li and atomic number 3. It is a soft, silvery-white metal and is the lightest of all metals. Lithium belongs to the Group 1 of the periodic table, which is commonly referred to as the "alkali metals". Alkali metals are characterized by their low reactivity and high reactivity with water. They are also highly reactive with halogens and form ionic compounds, such as lithium chloride, with non-metals. Lithium is an important element in the production of batteries, ceramics, and pharmaceuticals. In addition, it is used as a treatment for bipolar disorder and other mental health conditions. Lithium is found in nature in minerals such as spodumene, lepidolite, and petalite, and it is also present in seawater.

To know more about alkali metal

https://brainly.com/question/5063184

#SPJ4

Photosynthesis removes CO2 and animal activities, burning fossil fuels and burning wood add CO2.

Why is CO2 needed?

The main greenhouse gas that helps keep our atmosphere warm is carbon dioxide. Without them, our earth would be uninhabitable. However, the rise in average global temperature due to rising levels of CO2 in our atmosphere is affecting other aspects of Earth's climate. Carbon dioxide is required for the internal respiration of the human body. Internal respiration is the process of removing carbon dioxide and delivering oxygen to body tissues.

The pH value of the blood is protected by the vital carbon dioxide. Therefore, only plants excrete CO2.

To learn more about Carbon dioxide, here

brainly.com/question/3049557

#SPJ1

The simplest and the most common monosaccharide is a six-carbon sugar called glucose.

Glucose is a kind of sugar found in food, and it serves as an energy source for the body. Blood glucose or blood sugar is glucose or sugar that circulates in the blood to the body's cells. Glucose is a simple sugar that can be represented chemically as C₆H₁₂O₆. Glucose is the monosaccharide that occurs the most frequently overall, which is a subgroup of carbohydrates.

During the process of photosynthesis, plants and the majority of algae produce glucose from water and carbon dioxide by utilizing the energy from sunlight. Glucose is then used to produce cellulose in the cell walls of plants, which is the most abundant form of carbohydrate on the planet.

To learn more about glucose, click here:

https://brainly.com/question/2396657

#SPJ4

Answer:

Explanation:

The kinetic energy of molecules is related to their temperature, and at a given temperature, all molecules, polar or non-polar, have the same average kinetic energy. The difference between polar and non-polar molecules lies in their intermolecular forces. Polar molecules have dipoles (separation of charge) due to differences in electronegativity of the atoms within the molecule. These dipoles cause the polar molecules to have stronger intermolecular forces, such as dipole-dipole forces and hydrogen bonding, compared to non-polar molecules which only have weak van der Waals forces.

At 100 K, the kinetic energy of both polar and non-polar molecules is low. However, polar molecules are more likely to be attracted to each other due to their stronger intermolecular forces. This means that polar molecules may have lower kinetic energy compared to non-polar molecules at the same temperature, because they may be more likely to be held together by these forces.

In terms of which group of molecules has greater intermolecular forces, it would be the polar molecules due to the presence of dipoles and the resulting stronger intermolecular forces. However, it's important to note that intermolecular forces can vary greatly within each group of molecules, depending on the specific molecule and its structure.

1.32 g of oxygen combined with 2.00 g of magnesium to form 3.32 g of magnesium oxide.

What is a balanced equation?

A chemical equation is said to be balanced when each element has an equal number of atoms on both the reactant and product sides of the equation. In other words, the equation depicts a chemical reaction in which the total number of atoms present prior to the reaction is equal to the total number present following the reaction.

The law of conservation of mass is upheld when the equation is balanced, and the reaction that is occurring is correctly depicted.

You must find the difference between the total mass of the reactants and the mass of the product in order to calculate the mass of oxygen that combined with magnesium. The chemical equation for the reaction of magnesium and oxygen is as follows:

O2 + 2Mg = 2MgO

Therefore, the mass of magnesium oxide (MgO) produced by the reaction of 2.00 g of magnesium (Mg) and a small amount of oxygen (O) can be expressed as follows:

x g O + 2.00 g Mg = 3.32 g MgO

where x represents the oxygen's mass. You can calculate x by deducting the mass of magnesium from the product's overall mass:

We get 1.32 g from x = 3.32 g - 2.00 g.

Therefore, 1.32 g of oxygen and 2.00 g of magnesium were combined.

To know more about law of conservation of mass, visit:

brainly.com/question/28711001

#SPJ4