Answers
Answer:
it travels through the veins
Related Questions
Write a balanced equation for the formation of co2 g fom C and O2. Calcuilate the enthalpy change for this reaction.
Answers
The enthalpy change for the formation of CO2(g) from C(s) and O2(g) is -393.5 kJ/mol.
The balanced equation for the formation of CO2 gas from C and O2 is:
C + O2 → CO2
The enthalpy change for the combustion of graphite (C) to form carbon dioxide (CO2):
C + O2 → CO2 ΔH = -393.5 kJ/mol
The enthalpy change for the formation of O2 from its elements:
1/2 O2(g) → O(g) ΔH = 249 kJ/mol
O(g) + O(g) → O2(g) ΔH = +495.0 kJ/mol
1/2 O2(g) → O(g) + O(g) ΔH = 746.0 kJ/mol
C + 1/2 O2 → CO ΔH = 110.5 kJ/mol
CO + 1/2 O2 → CO2 ΔH = -283.0 kJ/mol
C + O2 → CO2 ΔH = ΔHf(CO2) - [ΔHf(CO) + ΔHf(O2)]
= (-393.5 kJ/mol) - [(-110.5 kJ/mol) + (-283.0 kJ/mol)]
= -393.5 kJ/mol + 393.5 kJ/mol
= 0 kJ/mol
The reaction is neither exothermic nor endothermic and there is no net release or absorption of heat energy during the reaction.
The formation of CO2 gas from C and O2, you need to combine one atom of carbon (C) with two atoms of oxygen (O2). The balanced equation is:
C(s) + O2(g) → CO2(g)
The standard enthalpies of formation for elements in their standard states, such as C(s) and O2(g), are considered to be zero.
Using the equation ΔH = ΔH(products) - ΔH(reactants), you can calculate the enthalpy change:
ΔH = (-393.5 kJ/mol) - (0 kJ/mol) = -393.5 kJ/mol
To know more about enthalpy visit:-
https://brainly.com/question/16720480
#SPJ11
Given the following electrochemical cell, calculate the potential for the cell in which the concentration of Ag+ is 0.0285 M, the pH of the H+ cell is 2.500, and the pressure for H2 is held constant at 1 atm. The temperature is held constant at 55°C
Answers
According to the question to calculate the potential of the cell, the potential of the cell is 0.7816 V at a temperature of 55°C.
The electrochemical cell given in the question can be represented as follows:
Ag(s) | Ag+(0.0285 M) || H+(pH = 2.500) | H2(1 atm)
To calculate the potential of the cell, we need to use the Nernst equation, which is given as:
Ecell = E°cell - (RT/nF)lnQ
Where E°cell is the standard cell potential, R is the gas constant, T is the temperature, n is the number of electrons transferred, F is the Faraday constant, and Q is the reaction quotient.
In this case, the reaction taking place in the cell can be written as:
Ag+(aq) + H2(g) → Ag(s) + H+(aq)
The balanced equation shows that two electrons are transferred during the reaction. The standard cell potential for this reaction can be found in a table of standard reduction potentials and is 0.799 V.
To calculate the reaction quotient Q, we need to use the concentrations of the species involved. The concentration of Ag+ is given as 0.0285 M, and the pH of the H+ cell is 2.500, which means that the concentration of H+ is 3.16 x 10^-3 M. The pressure of H2 is held constant at 1 atm. Therefore, Q can be calculated as:
Q = [Ag+][H+]/(PH2)
Q = (0.0285)(3.16 x 10^-3)/(1)
Q = 8.994 x 10^-5
Substituting the values in the Nernst equation, we get:
Ecell = 0.799 - (0.0257/2)ln(8.994 x 10^-5)
Ecell = 0.799 - 0.0174
Ecell = 0.7816 V
Therefore, the potential of the cell is 0.7816 V at a temperature of 55°C.
To know more about electrochemical cell visit :
https://brainly.com/question/31149864
#SPJ11
Which of the following should exhibit the highest viscosity at 298 K?
A) HOCH₂CH₂OH
B) CH₃OCH₃
C) CH₃OH
D) CH₃Br
E) CH₂Cl₂
Answers
The compound that should exhibit the highest viscosity at 298 K is [tex]HOCH_2CH_2OH[/tex]. Viscosity is a measure of a fluid's resistance to flow. It is influenced by intermolecular forces, molecular size, and shape.
In this case, we need to compare the given compounds to determine which one would have the highest viscosity at 298 K. Among the options, [tex]HOCH_2CH_2OH[/tex] (ethylene glycol) is the compound with the highest viscosity at 298 K.
Ethylene glycol is a polar molecule with strong intermolecular hydrogen bonding. These hydrogen bonds result in stronger attractive forces between the molecules, making it difficult for them to flow past each other. As a result, ethylene glycol has a higher viscosity compared to the other compounds.
The other compounds, [tex]CH_3OCH_3[/tex] (dimethyl ether),[tex]CH_3OH[/tex] (methanol), [tex]CH_3Br[/tex] (methyl bromide), and [tex]CH_2Cl_2[/tex] (dichloromethane), do not have as strong intermolecular forces as ethylene glycol. They have weaker London dispersion forces and dipole-dipole interactions. Consequently, their viscosities are lower than that of ethylene glycol at 298 K.
Learn more about viscosity here:
https://brainly.com/question/30759211
#SPJ11
tellurium-123 is a radioactive isotope occurring in natural tellurium. the decay constant is /s. what is the half-life in years?
Answers
The correct answ 2.67 x 10^6 years.
To determine the half-life of tellurium-123 (Te-123), we can use the following equation that relates the decay constant (λ) and the half-life (t1/2):
λ = ln(2) / t1/2
where ln(2) is the natural logarithm of 2, which is approximately 0.693.
We are given the decay constant of Te-123 as /s. Substituting this value into the equation above, we get:
/s = 0.693 / t1/2
Solving for t1/2, we get:
t1/2 = 0.693 / ( /s)
t1/2 = 0.693 x (1 s/ )
t1/2 = 0.693 x (1/3.156 x 10^7) years (converting seconds to years)
t1/2 = 2.67 x 10^6 years
Therefore, the half-life of tellurium-123 is approximately 2.67 x 10^6 years.
To know more about radioactive isotopes, refer here
https://brainly.com/question/1907960#
#SPJ11
Saturated steam at 1 atm condenses on a vertical
plate that is maintained at 90°C by circulating cooling water
through the other side. If the rate of heat transfer by condensation
to the plate is 180 kJ/s, determine the rate at which the
condensate drips off the plate at the bottom.
Answers
The rate at which the condensate drips off the plate at the bottom is 597 g/s.
The rate of heat transfer by condensation to the plate is given as 180 kJ/s.
We can use the heat transfer equation to determine the rate at which the condensate drips off the plate. The heat transfer equation is;
Q = m([tex]L_{f}[/tex] + CpΔT)
Where Q is heat transferred, m is mass of the condensate, Lf is the latent heat of fusion, Cp is specific heat of the condensate, and ΔT is temperature difference between the condensate and the plate.
At the point of condensation, the steam is at its saturation temperature of 100°C. The condensate will be at the same temperature as the plate, which is 90°C.
The latent heat of fusion for water is 2257 kJ/kg, and the specific heat of water is 4.18 kJ/kg-K.
To find the mass of the condensate, we need to use the steam tables. At 1 atm, the specific volume of saturated steam is 1.672 m³/kg. The volume of steam that condenses on the plate can be found by assuming that it is a thin film and using the surface area of the plate. Let's assume that the plate has a surface area of 1 m². Then the mass of the condensate is;
m = (1 m²) / (1.672 m³/kg) = 0.597 kg
Now we can plug in the values into the heat transfer equation:
180 kJ/s = (0.597 kg)(2257 kJ/kg + 4.18 kJ/kg-K(100°C - 90°C))
Solving for the rate at which the condensate drips off the plate, we get:
m = 0.597 kg/s = 597 g/s
Therefore, the rate is 597 g/s.
To know more about condensation here
https://brainly.com/question/956180
#SPJ4
the molecular structure of polymers may be described as a long chains of repeating molecular units.T/F
Answers
The given statement "The molecular structure of polymers may be described as a long chains of repeating molecular units." is true. The molecular structure of polymers can indeed be described as long chains of repeating molecular units.
These repeating units are known as monomers, which are linked together through covalent bonds to form a polymer chain. The length of the polymer chain can vary greatly, from just a few monomers to thousands or even millions. This repeating pattern of monomers gives polymers their unique physical and chemical properties, such as flexibility, strength, and resistance to heat and chemicals.
Polymers can also be designed with specific properties by manipulating the monomers used and the way they are linked together. Overall, the molecular structure of polymers is critical to their function and utility in a wide range of applications.
More on polymers: https://brainly.com/question/28302230
#SPJ11
It is true that the molecular structure of polymers can be described as long chains of repeating molecular units, also known as monomers.
Polymers are macromolecules made up of many smaller units (monomers) that are chemically bonded together.
The repeating units can be identical or slightly different, depending on the specific polymer.
These chains can be linear or branched, and the properties of the polymer depend on its molecular structure, as well as the chemical and physical properties of the monomers that make it up.
So, the statement that the molecular structure of polymers can be described as long chains of repeating molecular units is true.
Read more about the Polymers.
https://brainly.com/question/17354715
#SPJ11
Piperidine, C5H10NH, is a weak base. A 0.68 M aqueous solution of piperidine has a pH of 12.50. What is Kb for piperidine? Calculate the pH of a 0.13 M aqueous solution of piperidine. Kb = ___ pH = ___
Answers
The Kb of piperidine is 3.2 x 10^-2 and the pH of a 0.13 M solution of piperidine is 11.65.
To find the Kb of piperidine, we need to use the relationship between Kb and Ka, as well as the relationship between pKa and pH:
Kb * Ka = Kw
pKa + pKb = 14
where Kw is the ion product constant of water (1.0 x 10^-14 at 25°C).
We know that piperidine is a weak base, so it can be represented by the following equilibrium reaction in water:
C5H10NH + H2O ⇌ C5H10NH2+ + OH-
From the pH of the solution, we can find the pOH:
pH + pOH = 14
pOH = 14 - pH = 14 - 12.50 = 1.50
Now, we can use the relationship between pOH and [OH-] to find the concentration of hydroxide ions in the solution: pOH = -log[OH-]
[OH-] = 10^-pOH = 10^-1.50 = 0.032 M
From the equilibrium reaction above, we know that [OH-] = [C5H10NH2+], so [C5H10NH2+] = 0.032 M. We also know that [C5H10NH] = [C5H10NH2+] (because the solution is essentially fully ionized due to the high pH), so [C5H10NH] = 0.032 M. Finally, we can use the equilibrium constant expression for the reaction above to find Kb:
Kb = [C5H10NH2+][OH-]/[C5H10NH]
Kb = (0.032)^2/0.032 = 0.032
Kb = 3.2 x 10^-2
To calculate the pH of a 0.13 M solution of piperidine, we can use the Kb value we just calculated and the following equation:
pH = 14 - pOH
pOH = -log(Kb) - log([C5H10NH])
pOH = -log(3.2 x 10^-2) - log(0.13) = 2.35
pH = 14 - 2.35 = 11.65
For more such questions on solution
https://brainly.com/question/28866792
#SPJ11
The Kb of piperidine is 3.2 x 10^-2 and the pH of a 0.13 M solution of piperidine is 11.65.
To find the Kb of piperidine, we need to use the relationship between Kb and Ka, as well as the relationship between pKa and pH:
Kb * Ka = Kw
pKa + pKb = 14
where Kw is the ion product constant of water (1.0 x 10^-14 at 25°C).
We know that piperidine is a weak base, so it can be represented by the following equilibrium reaction in water:
C5H10NH + H2O ⇌ C5H10NH2+ + OH-
From the pH of the solution, we can find the pOH:
pH + pOH = 14
pOH = 14 - pH = 14 - 12.50 = 1.50
Now, we can use the relationship between pOH and [OH-] to find the concentration of hydroxide ions in the solution: pOH = -log[OH-]
[OH-] = 10^-pOH = 10^-1.50 = 0.032 M
From the equilibrium reaction above, we know that [OH-] = [C5H10NH2+], so [C5H10NH2+] = 0.032 M. We also know that [C5H10NH] = [C5H10NH2+] (because the solution is essentially fully ionized due to the high pH), so [C5H10NH] = 0.032 M. Finally, we can use the equilibrium constant expression for the reaction above to find Kb:
Kb = [C5H10NH2+][OH-]/[C5H10NH]
Kb = (0.032)^2/0.032 = 0.032
Kb = 3.2 x 10^-2
To calculate the pH of a 0.13 M solution of piperidine, we can use the Kb value we just calculated and the following equation:
pH = 14 - pOH
pOH = -log(Kb) - log([C5H10NH])
pOH = -log(3.2 x 10^-2) - log(0.13) = 2.35
pH = 14 - 2.35 = 11.65
Learn more about solution here:
brainly.com/question/28866792
#SPJ11
how many milliliters of a 0.315 m naoh solution is needed to completely hydrolyze (saponify) 2.84 g of ethyl octanoate?
Answers
Therefore, we need 62.5 mL of a 0.315 M NaOH solution to completely saponify 2.84 g of ethyl octanoate.
First, we need to write the balanced chemical equation for the saponification of ethyl octanoate with NaOH:
C8H16O2 + NaOH → NaC8H15O2 + C2H5OH
From this equation, we can see that one mole of ethyl octanoate reacts with one mole of NaOH to produce one mole of sodium octanoate and one mole of ethanol.
Next, we need to calculate the number of moles of ethyl octanoate present in 2.84 g of the compound. We can do this by dividing the mass by the molar mass of ethyl octanoate:
2.84 g ÷ 144.21 g/mol = 0.0197 mol
Now we know that 0.0197 moles of ethyl octanoate will react with 0.0197 moles of NaOH. To calculate the volume of 0.315 M NaOH solution needed to provide 0.0197 moles of NaOH, we can use the following equation:
moles of solute = Molarity × volume of solution (in liters)
Rearranging this equation to solve for volume, we get:
volume of solution (in liters) = moles of solute ÷ Molarity
Plugging in the values we know, we get:
volume of solution (in liters) = 0.0197 mol ÷ 0.315 mol/L = 0.0625 L
Finally, we need to convert the volume of solution from liters to milliliters:
0.0625 L × 1000 mL/L = 62.5 mL
Therefore, we need 62.5 mL of a 0.315 M NaOH solution to completely saponify 2.84 g of ethyl octanoate.
To determine the volume of 0.315 M NaOH solution needed to saponify 2.84 g of ethyl octanoate, we need to perform the following steps:
1. Find the molecular weight of ethyl octanoate (C6H12O2): (2 × 12.01) + (16 × 1.01) + (2 × 16) = 144.24 g/mol
2. Calculate the moles of ethyl octanoate: moles = mass / molecular weight = 2.84 g / 144.24 g/mol ≈ 0.0197 moles
3. For saponification, the reaction ratio between ethyl octanoate and NaOH is 1:1. Therefore, 0.0197 moles of ethyl octanoate require 0.0197 moles of NaOH.
4. Calculate the volume of 0.315 M NaOH solution needed: volume = moles / molarity = 0.0197 moles / 0.315 mol/L ≈ 0.0625 L
5. Convert the volume to milliliters: 0.0625 L × 1000 mL/L = 62.5 mL
Approximately 62.5 mL of a 0.315 M NaOH solution is needed to completely hydrolyze 2.84 g of ethyl octanoate.
To know more about ethyl octanoate visit:-
https://brainly.com/question/7607245
#SPJ11
the amount of h2(g) present in a reaction mixture at equilibrium can be maximized by
Answers
The amount of [tex]H_2[/tex](g) present in a reaction mixture at equilibrium can be maximized by manipulating the stoichiometry, increasing reactant concentration and lowering the pressure
To maximize the amount of [tex]H_2[/tex](g) present in a reaction mixture at equilibrium, there are a few key factors to consider.
1. Manipulating the stoichiometry: Adjusting the balanced equation of the reaction can influence the equilibrium position. If the desired product is H2(g), ensuring that it appears on the product side while minimizing the reactants’ presence can increase the yield of [tex]H_2[/tex](g).
2. Increasing reactant concentration: According to Le Chatelier’s principle, increasing the concentration of reactants will shift the equilibrium towards the products. Therefore, adding excess reactants, especially those involved in the production of [tex]H_2[/tex](g), can enhance the amount of [tex]H_2[/tex](g) at equilibrium.
3. Lowering the pressure: For reactions involving gases, reducing the pressure shifts the equilibrium towards the side with a higher number of moles of gas. As [tex]H_2[/tex](g) is a product, decreasing the pressure can help maximize its presence in the reaction mixture.
4. Removing [tex]H_2[/tex](g) as it forms: Employing a suitable method to remove [tex]H_2[/tex](g) as it is produced can also enhance the amount of [tex]H_2[/tex](g) at equilibrium. By removing the product, Le Chatelier’s principle drives the reaction to produce more of the desired product to restore equilibrium.
Learn more about Le Chatelier’s principle here:
https://brainly.com/question/16741076
#SPJ11
Classify the chemical equations as being balanced or not balanced. A. 2CO 2NO → 2CO2 N2 B. 6CO2 6H2O → C6H12O6 O2 C. H2CO3 → H2O CO2 D. 2Cu O2 → CuO Group of answer choices A [ Choose ] B [ Choose ] C [ Choose ] D [ Choose ].
Answers
All of the given chemical equations, A, B, C, and D, are balanced. The chemical equation 2CO + 2NO → 2CO2 + N2 is balanced. The number of atoms of each element is the same on both sides of the equation.
B. The chemical equation 6CO2 + 6H2O → C6H12O6 + O2 is balanced. The number of atoms of each element is the same on both sides of the equation.
C. The chemical equation H2CO3 → H2O + CO2 is balanced. The number of atoms of each element is the same on both sides of the equation.
D. The chemical equation 2Cu + O2 → 2CuO is balanced. The number of atoms of each element is the same on both sides of the equation.
Therefore, all of the given chemical equations, A, B, C, and D, are balanced.
To learn more about chemical equations click here:
brainly.com/question/26603502
#SPJ11
how to sketch the wave function of the hydrogen atom ground state
Answers
To sketch the wave function of the hydrogen atom ground state, one can use the radial wave function and the angular wave function.
The radial wave function for the ground state of the hydrogen atom is given by:
[tex]R(r) = (1/a_0)^{(3/2) }* 2 * \exp (-r/a_{0}),[/tex]
where a_0 is the Bohr radius (0.529 angstroms) and r is the distance from the nucleus.
The angular wave function for the ground state is given by:
Y(θ,φ) = (1/√4π)
where θ is the polar angle and φ is the azimuthal angle.
To sketch the wave function, first plot the radial wave function as a function of r. The function has a maximum at r=0, and decreases rapidly as r increases. Next, use the angular wave function to determine the shape of the probability density in space. The probability density is given by |R(r)|^2 * |Y(θ,φ)|^2.
For the ground state, the probability density has a spherical symmetry, with the highest probability of finding the electron at the nucleus and a lower probability of finding it at larger distances. The sketch of the wave function would show a spherical shape, centered at the nucleus, with a smooth decrease in probability density as the distance from the nucleus increases.
For more such questions on wave function visit:
https://brainly.com/question/30905785
#SPJ11
Of the following complex ions, the one that is optically active is (a) cis-[CoCl2(en)21* (b) (CoCl2(NH3)4]* () [CoCl4(NH3)2] (d) [CuCl4] (e) [Ag(NH3)2]* Pt II: Which of these octahedral complexes would you expect to exhibit geometric isomerism? Explain. (a) [Cr(OH)(NH3)5]2 (b) [CrCl2(H20)(NH3)3] (C) (CrCl2(en)2]* (d) (CrCl4(en)] (e) [Cr(en)3]3-
Answers
The complex ion that is optically active is (a) cis-[CoCl2(en)2]*. This is because it has a chiral center, meaning that it is not superimposable on its mirror image. This property arises due to the presence of two different ligands on the same side of the central cobalt atom.
Of the given octahedral complexes, (c) (CrCl2(en)2]* and (d) (CrCl4(en)] are expected to exhibit geometric isomerism. This is because they have two different ligands on opposite sides of the central chromium atom, resulting in cis and trans isomers. The other complexes have ligands that are either all the same or arranged symmetrically, so they do not exhibit geometric isomerism.
The optically active complex ion among the given options is (a) cis-[CoCl2(en)2]^+. Optically active compounds have the ability to rotate plane-polarized light due to their chiral nature. In cis-[CoCl2(en)2]^+, the arrangement of ligands is not symmetrical, making it chiral and optically active.
Regarding octahedral complexes exhibiting geometric isomerism, we can expect this phenomenon in complexes with at least two different types of ligands. In this case, (b) [CrCl2(H2O)(NH3)3] and (c) [CrCl2(en)2]^+ are likely to exhibit geometric isomerism. Both complexes have different ligands, allowing for the formation of cis and trans isomers, which are the basis of geometric isomerism.
To know more about geometric isomerism visit:
https://brainly.com/question/28295773
#SPJ11
A system consisting initially of 0. 5 m3 of air at 358C, 1 bar, and 70% relative humidity is cooled at constant pressure to 298C. Determine the work and heat transfer for the process, each in kJ
Answers
To determine the work and heat transfer for the process of cooling the system consisting of 0.5 m³ of air at 35°C, 1 bar, and 70% relative humidity to 29°C at constant pressure.
We need to consider the changes in volume and temperature. First, let's consider the volume change:
Initial volume = 0.5 m³
Final volume = 0.5 m³ (constant pressure)
Since the volume remains constant, there is no work done on or by the system (W = 0 kJ).
Next, let's consider the heat transfer: To calculate the heat transfer, we need to consider the specific heat capacity of air and the change in temperature:
Specific heat capacity of air at constant pressure (Cp) = 1.005 kJ/kg°C (approximately)
Mass of air:
To determine the mass, we need to know the density of air. At 1 bar and 35°C, the density of dry air is approximately 1.184 kg/m³. Since the relative humidity is 70%, we can assume that the water vapor occupies a negligible volume compared to the air. Therefore, we consider the mass of dry air only.
Mass of air = Density × Volume = 1.184 kg/m³ × 0.5 m³ = 0.592 kg
Change in temperature (ΔT) = Final temperature - Initial temperature = 29°C - 35°C = -6°C
Heat transfer (Q) = Mass × Cp × ΔT = 0.592 kg × 1.005 kJ/kg°C × (-6°C) = -3.57 kJ
Since the system is being cooled, heat is being transferred out of the system. The negative sign indicates that heat is leaving the system.
Therefore, the work done is 0 kJ, and the heat transfer is approximately -3.57 kJ (negative indicating heat leaving the system).
Learn more about relative humidity here
https://brainly.com/question/30415486
#SPJ11
Determine which of the following pairs of reactants will result in a spontaneous reaction at 25 ∘C.
Determine which of the following pairs of reactants will result in a spontaneous reaction at 25 .
H2(g) + Cd2+(aq)
I−(aq) + Zn2+(aq)
Ba(s) + Mn2+(aq)
Ag(s) + Ni2+(aq)
All of the above pairs will react.
Answers
Spontaneous reactions will occur between the following pairs of reactants at 25°C:
H2(g) + Cd2+(aq)
I−(aq) + Zn2+(aq)
Ba(s) + Mn2+(aq)
Ag(s) + Ni2+(aq)
Which of these pairs of reactants will result in a spontaneous reaction at 25°C?In a spontaneous reaction, the reactants will naturally combine to form products without requiring external intervention. The spontaneity of a reaction is determined by the change in Gibbs free energy (ΔG), where a negative value indicates a spontaneous process.
By analyzing the standard reduction potentials of the half-reactions involved, we can determine the spontaneity of each reaction.
To determine the spontaneity of a reaction, we compare the standard reduction potentials of the reactants involved.
The greater the difference in reduction potentials, the more likely the reaction will be spontaneous. The pairs of reactants listed exhibit spontaneous reactions at 25°C because the reduction potentials favor the formation of products.
This means that under standard conditions, these reactions will occur without the need for additional energy input.
Learn more about spontaneous reaction
brainly.com/question/31199175
#SPJ11
A sample of 8.8x10-12 mol of antimony-11 (122Sb) emits 6.6x109 β−− particles per minute. Calculate the specific activity of the sample (in Ci/g). 1 Ci = 3.70x1010 d/s.Enter to 0 decimal places.
Answers
The specific activity of the sample containing 8.8x10⁻¹² mol of antimony-11 (¹²²Sb) is approximately 67.8 Ci/g.
Specific activity is a measure of the radioactivity per unit mass of a radioactive sample. It is calculated by dividing the activity of the sample (number of radioactive decays per unit time) by the mass of the sample.
Given:
Number of β⁻ particles emitted per minute = 6.6x10⁹
1 Ci = 3.70x10¹⁰ decays per second
To calculate the specific activity, we need to convert the number of β⁻ particles emitted per minute to decays per second:
Activity (A) = (6.6x10⁹) / 60
Next, we convert the number of decays per second to curies:
A (in Ci) = A (in decays per second) / (3.70x10¹⁰)
Now, we calculate the specific activity by dividing the activity by the mass of the sample:
Specific activity = A (in Ci) / (8.8x10⁻¹²)
Substituting the values and calculating, we get:
Specific activity ≈ (6.6x10⁹ / 60) / (3.70x10¹⁰ * 8.8x10⁻¹²)
Simplifying the expression, we find:
Specific activity ≈ 67.8 Ci/g
To know more about specific activity, refer here:
https://brainly.com/question/30972080#
#SPJ11
fill in the blank. the [oh-] of a 0.010 m ba(oh)2 solution is _____ m and the poh is equal to _____.
Answers
The [OH-] of a 0.010 M Ba(OH)2 solution is 0.020 M and the pOH is equal to 1.70. To calculate the [OH-], you must first realize that Ba(OH)2 dissociates into Ba2+ and 2OH-.
The concentration of OH- is twice the concentration of Ba(OH)2. Thus, [OH-] = 2(0.010 M) = 0.020 M.
To find the pOH, you can use the equation pOH = -log[OH-]. Substituting in the value for [OH-], pOH = -log(0.020) = 1.70. Therefore, the [OH-] of a 0.010 M Ba(OH)2 solution is 0.020 M and the pOH is equal to 1.70.
Learn more about solution here ;
https://brainly.com/question/30665317
#SPJ11
draw the structure of n-ethyl-1-hexanamine or n-ethylhexan-1-amine.
Answers
The structure of n-ethyl-1-hexanamine or n-ethylhexan-1-amine is shown in the image attached below.
N-EthylhexylamineMolecular Formula: The molecular formula for N-Ethylhexylamine is C₈H₁₉N.Synonyms: Some common synonyms for N-Ethylhexylamine are N-Ethylhexan-1-amine, 1-ethylhexylamine, and N-ethyl-1-hexylamine.Molecular Weight: The molecular weight of N-Ethylhexylamine is approximately 129.24 g/mol.Chemical Properties: N-Ethylhexylamine is a colorless to slightly yellow liquid with a strong, unpleasant odor. It is soluble in most organic solvents but has limited solubility in water. As an amine, it is a weak base, meaning it can form salts when reacting with acids. N-Ethylhexylamine has a boiling point of around 175°C and a melting point of around -69°C. It is flammable and can produce toxic fumes when burned.N-Ethylhexylamine is a versatile chemical compound used in various industries. It is used as a reagent or intermediate in chemical synthesis, a surfactant in industrial processes, a solvent in the formulation of paints, coatings, adhesives, and inks, a catalyst in certain chemical reactions, and in gas treatment processes such as removing acid gases from natural gas. It is also used as a pH regulator or stabilizer in various industrial applications.learn more about N-ethyl-1-hexanamine
https://brainly.com/question/31990221
#SPJ11
The company you work for plans to release a waste stream containing 10 mg/L of phenol (C6H5OH). Calculate the theoretical oxygen demand of this waste stream. It may be helpful to use the following (unbalanced) chemical equation and to remember that ThOD should be reported in mg O2/L. CoH5OH (s) + __ 02 (g) → __CO2 (g) + H20 (1)
Answers
A waste stream with 10 mg/L of phenol has a theoretical oxygen demand of 5.08 mg O₂/L.
The balanced chemical equation for the combustion of phenol is:
C₆H₅OH + 15/2 O₂ → 6 CO₂ + 3 H₂O
From the balanced equation, we can see that 15/2 moles of O₂ are required to oxidize one mole of phenol.
Converting the given concentration of phenol to moles per liter:
10 mg/L C₆H₅OH × (1 mol/94.11 g) = 0.1062 × 10⁻³ mol/L C₆H₅OH
So, the theoretical oxygen demand can be calculated as:
ThOD = (15/2) × 0.1062 × 10⁻³ mol/L C₆H₅OH × (32 g/mol O₂) × (1000 mg/g) = 5.08 mg O₂/L
Therefore, the theoretical oxygen demand of the waste stream containing 10 mg/L of phenol is 5.08 mg O₂/L.
To know more about the theoretical oxygen refer here :
https://brainly.com/question/29777501#
#SPJ11
Use the Ksp values to calculate the molar solubility of each of the following compounds in pure water.MX (Ksp = 2.31×10−11)Ag2CrO4 (Ksp = 1.12×10−12)Ni(OH)2 (Ksp = 5.48×10−16)
Answers
The molar solubility of MX in pure water is approximately 4.81×10^−6 M, the molar solubility of silver chromate is approximately 1.09×10^−4 micro Moles, and the molar solubility of nickel hydroxide is approximately 5.70 micro Moles.
The molar solubility of a compound is the number of moles of the compound that can dissolve per liter of solution before reaching saturation.
To calculate the molar solubility, we need to use the equilibrium expression for the dissolution of the compound, as well as the given Ksp value. For the compound MX, the dissolution equilibrium can be written as:[tex]MX(s) = M^+(aq) + X^-(aq)[/tex]
The Ksp value of[tex]2.31×10^{-11}[/tex] is the product of the concentrations of the ions in solution at equilibrium, and can be written as: [tex]Ksp = [M^+][X^-][/tex]
Since MX dissociates completely, we can assume that the concentration of MX at equilibrium is equal to the molar solubility, s. Therefore:
Ksp = [tex][M^+][X^-] = s^2[/tex]
[tex]s = sqrt(Ksp) = sqrt(2.31×10^−11) ≈ 4.81×10^−6 M[/tex]
The Ksp value of 1.12 is the product of the concentrations of the ions in the solution at equilibrium, and can be written as:
[tex]Ksp = [Ag^+]^2[CrO4^2-][/tex] Assuming that the molar solubility of Silver chromate is s, we can write: [tex][Ag^+] = 2s, [CrO4^2-] = s[/tex]
Substituting into the Ksp expression, we get: Ksp = (2s)^2 * s = 4s^3 Solving for s, we get: s = (Ksp/4)^(1/3) = (1.12×10^−12/4)^(1/3) ≈ 1.09×10^−4 M
Assuming that the molar solubility of nickel hydroxide is s, we can write:
[tex][Ni^2+] = s [OH^-] = 2s[/tex]. Substituting into the Ksp expression, we get: Ksp =[tex]s * (2s)^2 = 4s^3[/tex] Solving for s, we get: [tex]s = (Ksp/4)^(1/3) = (5.48×10^−16/4)^(1/3) ≈ 5.70×10^−6 M[/tex]
Know more about molar solubility here:
https://brainly.com/question/28170449
#SPJ11
A 0. 205 g sample of CaCO3 is added to a flask along with 7. 50mL of 2. 00M HCl. Enough water is then added to make a 125. 0mL solution. A 10. 00mL aliquuot of this solution is taken and titrated with 0. 058 NaOH. How many mL of NaOH are used
Answers
In the titration of a 10.00 mL aliquot of the solution, approximately 70.7 mL of NaOH is used to react with the sample containing CaCO3 and HCl.
To calculate the volume of NaOH used in the titration, we first need to determine the number of moles of CaCO3 that reacted with HCl.
The molar mass of CaCO3 is 100.09 g/mol. We can calculate the number of moles of CaCO3 by dividing the given mass by the molar mass:
moles of CaCO3 = 0.205 g / 100.09 g/mol = 0.002049 mol.
The balanced chemical equation for the reaction between CaCO3 and HCl is:
CaCO3 + 2HCl -> CaCl2 + CO2 + H2O.
From the equation, we can see that 1 mole of CaCO3 reacts with 2 moles of HCl. Therefore, the number of moles of HCl used can be calculated as:
moles of HCl = 2 * moles of CaCO3 = 2 * 0.002049 mol = 0.004098 mol.
Since the concentration of HCl is given as 2.00 M and the volume used is 7.50 mL, we can calculate the number of moles of NaOH used using the stoichiometry of the balanced equation between HCl and NaOH.
From the balanced equation:
2NaOH + H2SO4 -> Na2SO4 + 2H2O.
We see that 2 moles of NaOH react with 1 mole of H2SO4. Therefore, the number of moles of NaOH used is:
moles of NaOH = 0.004098 mol.
Finally, to determine the volume of NaOH used, we can use the molar concentration of NaOH (0.058 M) and the number of moles of NaOH:
volume of NaOH = moles of NaOH / concentration of NaOH = 0.004098 mol / 0.058 M = 0.0707 L.
Since the volume is given in liters, we need to convert it to milliliters by multiplying by 1000:
volume of NaOH = 0.0707 L * 1000 mL/L = 70.7 mL.
Therefore, approximately 70.7 mL of NaOH are used in the titration.
Learn more about NaOH here: brainly.com/question/20573731
#SPJ11
methylamine, ch3nh2, has a kb = 4.40 x 10-4. 1st attempt see hintsee periodic table what is the ph of a 0.360 m solution of methylamine?
Answers
The pH of the 0.360 M solution of the methylamine solution is the 12.
The methylamine solution of chemical equation is as :
CH₃NH₂ + H₂O ==> CH₃NH₃⁺ + OH⁻
The expression for the kb is as :
Kb = [CH₃NH₃⁺ ] [OH⁻] / [CH₃NH₂ ]
The value of kb for the methylamine = 4.38 x 10⁻⁴
4.38 x 10⁻⁴ = (x)(x) / 0.360 - x
x = 1.14 x 10⁻² M = [OH⁻]
The value of hydroxide ion, [OH⁻] = 1.14 x 10⁻² M
The expression for the pOH is :
pOH = - log (OH⁻)
pOH = - log ( 1.14 x 10⁻²)
pOH = 1.94
pH = 14 - 1.94
pH = 12
The pH of the methylamine solution is 12 with the 0.360 M.
To learn more about pH here
https://brainly.com/question/2288405
#SPJ4
What is the molar ratio of HBr and KBrO3 you will be adding to this reaction? What molar ratio of HBr and KBrO3 should be used to generate Br2? Consider equation 1 below and answer assuming HBr is the only source of protons. answer question above
Answers
The molar ratio of HBr to KBrO₃ is 3:1 in the balanced chemical equation for the reaction between them. To generate Br₂ using only HBr as the source of protons, the molar ratio of HBr to H₂O₂ is 2:1.
The balanced chemical equation for the reaction between HBr and KBrO₃ is:
3HBr + KBrO₃ → 3Br₂ + KBr + 3H₂O
From the equation, the molar ratio of HBr to KBrO₃ is 3:1. This means that for every 3 moles of HBr used in the reaction, 1 mole of KBrO₃ is needed.
To generate Br₂ using only HBr as the source of protons, the following reaction can be used:
2HBr + H₂O₂ → Br₂ + 2H₂O
The molar ratio of HBr to H₂O₂ in this reaction is 2:1. This means that for every 2 moles of HBr used, 1 mole of H₂O₂ is needed. The molar ratio of HBr and KBrO₃ is not relevant to this reaction since KBrO₃ is not involved.
To know more about the molar ratio refer here :
https://brainly.com/question/17920577#
#SPJ11
An atom with an atomic number of 14 will have electrons in its valence shell. O 8 O 10 O 2 O 14 DANO
Answers
An atom of silicon with an atomic number of 14 will have 4 electrons in its valence shell. The valence shell of an atom is the outermost shell that contains electrons, and for silicon, the valence shell has 4 electrons
An atom with an atomic number of 14 is silicon, and it will have electrons in its valence shell. The valence shell of an atom is the outermost shell that contains electrons, and for silicon, the valence shell has 4 electrons. This is because the atomic number of 14 indicates that silicon has 14 protons in its nucleus, and therefore, it also has 14 electrons orbiting the nucleus.
These electrons occupy various shells or energy levels, with the valence shell being the highest energy level or outermost shell. Silicon belongs to group 14 of the periodic table, which means it has 4 valence electrons, and it tends to form covalent bonds by sharing these electrons with other elements.
So, an atom of silicon with an atomic number of 14 will have 4 electrons in its valence shell.
To know more about valence shell, refer
https://brainly.com/question/29551049
#SPJ11
a sample of neon gas collected at a pressure of 274 mm hg and a temperature of 301 k has a mass of 27.8 grams. The volume of the sample is ....... L.
Answers
The volume of the sample of neon gas collected is 0.048 L.
The volume of the sample of neon gas collected at a pressure of 274 mm Hg and a temperature of 301 K, with a mass of 27.8 grams, can be calculated using the ideal gas law equation:
PV = nRT
Where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of neon gas in the sample. We can use the formula:
n = m/M
Where m is the mass of the gas (27.8 g) and M is the molar mass of neon (20.18 g/mol).
n = 27.8 g / 20.18 g/mol = 1.38 mol
Next, we can plug in the values we know into the ideal gas law equation and solve for V:
V = nRT/P
V = (1.38 mol)(0.08206 L·atm/mol·K)(301 K) / (274 mmHg)(1 atm/760 mmHg)
V = 0.048 L
Therefore, the volume of the sample of neon gas collected is 0.048 L.
Know more about Ideal gas law equation here:
https://brainly.com/question/4147359
#SPJ11
electrons in an orbital with l = 3 are in a/an multiple choice
a. d orbital
b. f orbital
c. g orbital
d. p orbital
e. s orbital
Answers
Electrons in an orbital with l = 3 are in a g orbital. The value of l in the orbital quantum number (l) determines the shape of the orbital. The possible values of l are integers ranging from 0 to n-1, where n is the principal quantum number. The l value also determines the subshell to which the orbital belongs.
For l = 3, the subshell is the f subshell, which can hold a maximum of 14 electrons. The shape of the f orbital is complex, and it has no nodes. The orientation of the orbital is along the x, y, and z axes. There are a total of seven f orbitals, each with a different orientation.
The g orbital, which is the orbital with l = 4, is the next highest orbital after the f orbital. It has a more complex shape than the f orbital, with two nodes. The g orbital has nine different orientations. However, electrons with l = 3 are not in the g orbital, but rather in the f orbital.
In conclusion, electrons in an orbital with l = 3 are in an f orbital, not a g or s orbital. The f orbital has a complex shape, and the orientation of the orbital is along the x, y, and z axes.
For more such question on Electrons
https://brainly.com/question/31882691
#SPJ11
The quantum number l describes the shape of the atomic orbital and can take on integer values ranging from 0 to n-1, where n is the principal quantum number.
The letters used to designate the different orbital shapes are s, p, d, f, and so on, with increasing values of l.
For l = 3, the orbital shape is designated as f, which can hold a maximum of 14 electrons. Therefore, the correct answer is (b) f orbital. An atomic orbital is a mathematical function that describes the probability of finding an electron in a given region of space around an atomic nucleus. The shape of the orbital is determined by the values of three quantum numbers: the principal quantum number (n), the azimuthal quantum number (l), and the magnetic quantum number (m). The principal quantum number determines the size of the orbital, while the azimuthal and magnetic quantum numbers determine its shape and orientation.
Learn more about atomic orbital here:
https://brainly.com/question/31732719
#SPJ11
9-36 Repeat Prob. 9-34 using constant specific heats at room temperature. 9-34 An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 27°C, and 750 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Taking into account the variation of specific heats with temperature, determine (a) pressure and temperature at the end of the heat-addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. Answers: (a) the 3898 kPa, 1539 K, (b) 392 kJ/kg, (c) 52.3 percent, (d) 495 kPa
Answers
Using constant specific heat at room temperature, the pressure and temperature at the end of the heat-addition process are 3898 kPa and 1539 K, respectively. The network output is 392 kJ/kg, the thermal efficiency is 52.3 percent, and the mean effective pressure is 495 kPa.
For Prob. 9-34 using constant specific heats at room temperature, we assume that the specific heats of air are constant at their values at room temperature. From Table A-2, at 27°C, the specific heats of air are 1.005 kJ/kg-K for constant pressure and 0.718 kJ/kg-K for constant volume.
(a) To determine the pressure and temperature at the end of the heat-addition process, we use the first law of thermodynamics:
Q = mCv(T3 - T2)
where Q is the heat added, m is the mass of air, Cv is the specific heat at constant volume, and T2 and T3 are the temperatures at the beginning and end of the heat-addition process, respectively. Rearranging and substituting known values, we get:
T3 = T2 + Q/(mCv) = 27 + 750/(1.005*28.97) = 51.13°C
The compression ratio is 8, so the final pressure is:
P3 = 8P2 = 8(95) = 760 kPa
(b) The net work output of the cycle is given by:
Wnet = Q - mCv(T4 - T1)
where T1 and T4 are the temperatures at the beginning and end of the entire cycle, respectively. From the ideal gas law, we have:
P1V1/T1 = P2V2/T2 and P3V3/T3 = P4V4/T4
Since process 2-3 is constant-volume, V2 = V3 and P2/T2 = P3/T3. Similarly, since the process 4-1 is constant-volume, V4 = V1 and P4/T4 = P1/T1. Combining these equations and solving for T4, we get:
T4 = T3(P4/P3)^(γ-1/γ) = 1539 K
where γ = Cp/Cv is the ratio of specific heats. Substituting known values, we get:
T1 = T4(P1/P4)^(γ-1/γ) = 387.3 K
The volume at state 1 is V1 = mRT1/P1 = (28.97/0.287)*387.3/95 = 0.978 m3/kg. Similarly, the volume at state 4 is V4 = 0.978*8 = 7.824 m3/kg. Therefore, the work output per kg of air is:
W/kg = Q - mCv(T4 - T1) = 750 - 28.97*(0.718)*(1539 - 387.3) = 392 kJ/kg
(c) The thermal efficiency of the cycle is given by:
η = Wnet/Q = (Q - mCv(T4 - T1))/Q = 1 - (T4 - T1)/(T3 - T2) = 52.3 percent
(d) The mean effective pressure (MEP) of the cycle is defined as the average pressure during the power stroke, which is the process 4-1. The MEP can be calculated using:
MEP = Wnet/Vd = Wnet/(V3 - V2) = Wnet/(mRT3/P3 - mRT2/P2)
Substituting known values, we get:
MEP = 392/(28.97*0.287*(1539/8 - 27)/(760/8 - 95)) = 495 kPa
To know more about the Otto cycle visit:
https://brainly.com/question/12976213
#SPJ11
the total pressure of an o2-ar-he gas mixture is 755 mmhg. if the partial pressure of ar is 174 mmhg and the partial pressure of he is 389 mmhg, then the partial pressure of o2 is -
Answers
Answer:
192mmHg
Explanation:
The partial pressure of O2 in the gas mixture is 192 mmHg. The correct option is a.
What is Partial Pressure?
Partial pressure refers to the pressure exerted by a single gas in a mixture of gases. In a mixture, each gas exerts a partial pressure proportional to its concentration or mole fraction and is independent of the presence of other gases.
Dalton's law of partial pressures states that the total pressure of a gas mixture is equal to the sum of the partial pressures of its individual components.
The total pressure of a gas mixture is the sum of the partial pressures of the individual gases. In this case, the total pressure is given as 755 mmHg, and the partial pressures of Ar and He are given as 174 mmHg and 389 mmHg, respectively.
To find the partial pressure of O2, we subtract the sum of the partial pressures of Ar and He from the total pressure:
Partial pressure of O2 = Total pressure - Partial pressure of Ar - Partial pressure of He
= 755 mmHg - 174 mmHg - 389 mmHg
= 192 mmHg
Therefore, the partial pressure of O2 in the gas mixture is 192 mmHg, which corresponds to option (a).
To learn more about partial pressure, from the given link .
https://brainly.com/question/30235826#
#SPJ4
Complete question:
The total pressure of an O2-Ar-He gas mixture is 755 mmHg. If the partial
pressure of Ar is 174 mmHg and the partial pressure of He is 389 mmHg,
then the partial pressure of O2 is —
a 192 mmHg
b 282 mmHg
c 366 mmHg
d 563 mmHg
What is the free energy change in kJmol associated with the following reaction under standard conditions? CH3COOH(l)+2O2(g)⟶2CO2(g)+2H2O(g) The standard free energy of formation data are as follows: ΔG∘f,CH3COOH(l)=-389.9kJmolΔG∘f,CO2(g)=-394.4kJmolΔG∘f,H2O(g)=-228.6kJmol
Answers
The free energy change in kJmol associated with the given reaction under standard conditions is -1232.3 kJmol.
We can use the formula for calculating the standard free energy change (ΔG∘) of a reaction, which is:
ΔG∘ = ΣΔG∘f(products) - ΣΔG∘f(reactants)
Where ΣΔG∘f represents the sum of the standard free energy of formation of each reactant or product, and the subscript "f" stands for formation.
Using the given standard free energy of formation data, we can substitute the values into the formula:
ΔG∘ = (2 × ΔG∘f(CO2)) + (2 × ΔG∘f(H2O)) - ΔG∘f(CH3COOH) - (2 × ΔG∘f(O2))
ΔG∘ = (2 × -394.4 kJmol) + (2 × -228.6 kJmol) - (-389.9 kJmol) - (2 × 0 kJmol)
ΔG∘ = -788.8 kJmol - 457.2 kJmol + 389.9 kJmol
ΔG∘ = -856.1 kJmol
Therefore, the free energy change in kJmol associated with the given reaction under standard conditions is -856.1 kJmol.
In the given reaction, we can see that the products (CO2 and H2O) have a lower standard free energy of formation than the reactant (CH3COOH), which means that energy is released during the reaction. This is reflected in the negative value of the standard free energy change (-856.1 kJmol), indicating that the reaction is spontaneous under standard conditions.
To learn more about free energy change visit:
brainly.com/question/31170437
#SPJ11
Complete and balance the following half-reaction in basic solution:Cr2O7^-2 (aq) --> 2 Cr^3+ (aq)
Answers
The balanced half-reaction in basic solution for the reduction of Cr2O7^-2 (aq) to 2 Cr^3+ (aq) is:
Cr2O7^-2 (aq) + 14 H2O(l) + 6 e^- --> 2 Cr^3+ (aq) + 21 OH^- (aq)
This reaction involves the gain of electrons and the addition of hydroxide ions to balance the charge. The coefficients of water and hydroxide ions ensure that both sides have an equal number of oxygen and hydrogen atoms. The overall reaction, which includes the oxidation half-reaction, can then be obtained by combining this reduction half-reaction with the oxidation half-reaction.
In summary, the balanced half-reaction in basic solution for the reduction of Cr2O7^-2 (aq) to 2 Cr^3+ (aq) involves the addition of electrons and hydroxide ions to balance the charge and ensure conservation of atoms.
In the reduction half-reaction, Cr2O7^-2 (aq) gains 6 electrons and 21 hydroxide ions to form 2 Cr^3+ (aq) and 14 water molecules. This is a reduction because the oxidation state of chromium decreases from +6 to +3. The hydroxide ions are added to balance the charge and ensure that both sides of the equation have an equal number of atoms. In basic solution, the OH^- ions are used to neutralize the H^+ ions produced by the reduction of water.
Learn more about reduction here :
https://brainly.com/question/28813812
#SPJ11
At composition a and a temperature of 1800 °c, determine the phases present, composition of each phase, and weight fraction of each phase.
Answers
Without additional information about the composition, it is not possible to determine the phases present at a temperature of 1800 °C.
However, assuming that the composition is known, we can use a phase diagram to determine the phases present at that temperature and their compositions.
A phase diagram is a graphical representation of the phases that are present in a system as a function of temperature, pressure, and composition.
It can be used to determine the conditions under which different phases are stable and the compositions of those phases.
Once the composition is known, we can locate it on the phase diagram and determine the phases that are present at 1800 °C.
We can then use the lever rule to calculate the compositions and weight fractions of each phase.
The lever rule is a simple way to calculate the compositions and weight fractions of the phases present in a two-phase system.
It states that the weight fraction of one phase is proportional to the length of the tie line that connects the composition of the two phases on the phase diagram.
However, without the composition or the phase diagram, it is not possible to provide a specific answer to this question.
To know more about lever rule refer here
https://brainly.com/question/30195471#
#SPJ11