Answers
Answer:
D
Explanation:
when you try to find out if it is positive, the line goes from left to right, and in this question the line is going upward.
Related Questions
The achievement of lifting a rocket off the ground and into space can be explained by
Answers
Answer:
The achievement of lifting a rocket off the ground and into space can be explained by Newton's third law of motion. What is required for a rocket to lift off into space? Thrust is required for a rocket to lift off into space, ... An object that travels around another object in space is called a satellite.
Explanation:
To escape from a horrible fire, two people are forced to jump from the third story of a burning building onto solid concrete. Which person is more likely to sustain fewer injuries: the jumper who comes to an abrupt halt when he lands or the jumper who bounces after impact?
Answers
The jumper who bounces after impact is more likely to sustain fewer injuries since he/she has a lesser change in momentum.
Impulse:According to the question:
Two people are forced to jump from the third story of a burning building onto solid concrete to escape the fire.
One person lands on the ground and comes to an abrupt halt.
The other person bounces off the ground after impact.
We know that the sudden change in momentum results in impulse. Impulse is directly proportional to the force exerted on the body. The greater the impulse, the larger the force exerted on the body.
If we assume that both the person have the same mass then:
The person coming to an abrupt halt has a larger change in momentum that the person who bounces off. Since the person who bounces off continues to be in motion, retaining some of the momenta while the direction of motion changes.
So the person who bounces after impact will sustain fewer injuries.
Learn more about impulse:
https://brainly.com/question/904448?referrer=searchResults
Oil is a powerful source of energy used for cars, machines, and many other purposes. While studying sources of energy that could replace the use of oil, a student thinks about solar power, wind power, nuclear power, and electric batteries. The students asks, "Which type of source will waste the least energy and provide the most energy in all situations?" Which best describes why a scientist would ask a different question than this one? The question asks about subjective personal preferences regarding energy. The question focuses on the objective measurements of amounts of energy. The question has too wide of a focus, as though all situations can be studied at once. The question is focused on the future and finding new answers about changing needs.
Answers
Answer:
The question has too wide of a focus, as though all situations can be studied at once.
Explanation:
Please help I don’t know how to do this
Answers
Answer:
2.2 m/sExplanation:
formula to be used is: a = ∆v/∆t
where:
a = 0.09 m/s²
∆t = 10 s
∆v = a*∆t
= (0.09 m/s²)(10 s)
= 0.9 m/s
Vivian's final speed:
= initial speed + change in speed
= 1.3 m/s + 0.9 m/s
= 2.2 m/s
You may have noticed runaway truck lanes while driving in the mountains. These gravel-filled lanes are designed to stop trucks that have lost their brakes on mountain grades. Typically, such a lane is horizontal (if possible) and about 36.0 m36.0 m long. Think of the ground as exerting a frictional drag force on the truck. A truck enters a typical runaway lane with a speed of 50.5 mph50.5 mph ( 22.6 m/s22.6 m/s ). Use the work-energy theorem to find the minimum coefficient of kinetic friction between the truck and the lane to be able to stop the truck.
Answers
Answer:
The coefficient of kinetic friction [tex]\mu_k = 0.724[/tex]
Explanation:
From the question we are told that
The length of the lane is [tex]l = 36.0 \ m[/tex]
The speed of the truck is [tex]v = 22.6\ m/s[/tex]
Generally from the work-energy theorem we have that
[tex]\Delta KE = N * \mu_k * l[/tex]
Here N is the normal force acting on the truck which is mathematically represented as
[tex]\Delta KE[/tex] is the change in kinetic energy which is mathematically represented as
[tex]\Delta KE = \frac{1}{2} * m * v^2 [/tex]
=> [tex]\Delta KE = 0.5 * m * 22.6^2 [/tex]
=> [tex]\Delta KE = 255.38m [/tex]
[tex] 255.38m = m * 9.8 * \mu_k * 36.0 [/tex]
=> [tex] 255.38 = 352.8 * \mu_k [/tex]
=> [tex]\mu_k = 0.724[/tex]
Which statement is supported by Kepler's laws?
O The closer a planet is to the Sun, the faster it moves.
O The farther a planet is from the Sun, the faster it moves.
O As a planet moves away from the Sun, its gravitational force increases.
O As a planet moves away from the Sun, its gravitational force remains the same.
Answers
Answer:
A. The closer a planet is to the Sun, the faster it moves.
Explanation:
According to this law, planets move around the sun in elliptical orbits. An imaginary lines drawn from the center of Sun to center of planets will sweep equal area in equal time interval.
Answer option B,C&D is incorrect because planets that are far away from the Sun take more time to move all around the Sun and experience less gravitational force and move slower than those near the Sun.
Answer:
a
i am never wrong
What was Bear B's average speed in m/min? (No units required for answer. Type your answer.)
Answers
Answer:
43
Explanation:
you divide 2600 by 60 and your answer is 43.3333333
I just took the quiz and got it right!
A roller coaster at the Six Flags Great America amusement park in Gurnee, Illinois, incorporates some clever design technology and some basic physics. Each vertical loop, instead of being circular, is shaped like a teardrop. The cars ride on the inside of the loop at the top, and the speeds are fast enough to ensure that the cars remain on the track. The biggest loop is 40.0 m high. Suppose the speed at the top is 10.8 m/s and the corresponding centripetal acceleration is 2g. (a) What is the radius of the arc of the teardrop at the top
Answers
Answer:
5.95 m
Explanation:
Given that the biggest loop is 40.0 m high. Suppose the speed at the top is 10.8 m/s and the corresponding centripetal acceleration is 2g
For the car to stick to the loop without falling down, at the top of the ride, the centripetal force must be equal to the weight of the car. That is,
(MV^2) / r = mg
V^2/ r = centripetal acceleration which is equal to 2g
2 × 9.8 = 10.8^2 / r
r = 116.64 /19.6
r = 5.95 m
Which action could a student take to show a transverse wave
A:blow up a balloon
B:shake a rope from side to side
C:shout across a soccer field
D:Knock on a door
Answers
Answer:
B is the correct answer
Explanation:
I just did this question
In order for clouds to form, what must happen first?
Answers
Answer:
Step 1: Change Water Vapor into Liquid Water
But in order to grow a cloud, we need to get the water vapor from a gas to its liquid form. Clouds begin to form when a parcel of air rises from the surface up into the atmosphere
Explanation:
if you double the period of a pendulum. what happens to its length?
Answers
The only way you COULD double the period would be to make the string 4 times as long as it is now.
What volume is represented by each small tick mark ? Help !!!
Answers
Answer:
In the taller, skinnier cylinder, each tick mark represents 2, while in the larger one, each tick mark represents 50.
Explanation:
If you count the tick marks between each big number, then you can divide, and figure out what amount each tick mark represents.
A .25 kilogram baseball is thrown upwards with a speed of 30 meters per second. Neglecting friction the maximum height reached by the baseball is approximately
Answers
Answer: 46 meters
Explanation:
The maximum height reached by the base ball is 45.9 meters.
To find the maximum height the given values are,
Mass = 25 Kg
speed v = 30 meters per second.
What is the height of baseball reached?As the ball goes up, it acts due to the gravity.
The gravity slows an upward-moving object,
Acceleration due to gravity = 9.8 m/s every second,
the baseball reaches its greatest height in (30/9.8) = 3.06 seconds.
At that instant, its speed is zero.
The baseball's average speed from toss to peak is
(1/2) (30 + 0) = 15 m/s .
The baseball average speed = 15 m/s
And the time for greatest height = 3.06 seconds.
Substituting the given values,
The ball rises can be calculated as
(15 x 3.06) = 45.9 meters.
Thus, the baseball reached the maximum height approximately is 45.9 meters.
Learn more about the height due to gravity,
https://brainly.com/question/1977173
#SPJ6
7. Which of the following statements concerning a short in a series circuit is true?
O A. A short causes the circuit voltage to increase.
B. A short circuit will draw less current than a properly functioning one.
C. A short circuit is similar to adding another resistor to the circuit.
D. Little or no current will flow through the circuit beyond the point of the short.
Answers
Answer:
A circuit that has little or no resistance
Explanation:
Apex
Little or no current will flow through the circuit beyond the point of the short a short in a series circuit .
What is a short in a series circuit?Simply said, a short circuit is a connection with low resistance between the two conductors delivering electricity to any circuit. This leads to an excessive current flow via the "short" in the power source and may potentially result in the power source being destroyed.
When there is a short in a series circuit, the current rises over its typical level. When a component is shorted, the voltage drop across it drops to 0V, while the voltage drop across the intact component rises.
In a series circuit, if there was a short circuit, one of the components would blow up and the circuit, or all the components, would cease to function. All of the lights would consequently go off. That would account for a blackout even if one component had a short circuit.
To learn more about circuit, refer the link:
https://brainly.com/question/29032441
#SPJ6
Megan is eating a Snickers and decides not to finish the last it of it. She drops the snickers into a trashcan below. What happens to the speed of the piece of Snickers as it falls towards the trashcan?
Answers
Answer:
i like trains 45654
Explanation:
A block of wood mass 0.60kg is balanced on top of a vertical port 2.0m high. A 10gm bullet is fired horizontally into the block and the embedded bullet land at a 4.0m from the base of the port. Find the initial velocity of the bullet.
Answers
Answer:
Mass of bullet is m=0.01kg
Mass of the block is M=4kg
Coefficient=0.25,distance=20m
So, let the speed of the block just after the bullet embedded in it be V and v be the speed of bullet before striking the block,
By applying conservation of momentum,
mv=(m+M)V
V=
M+m
mv
Explanation:
please mark me as the brainliest answer and please follow me for more answers to your questions..
The initial velocity of the bullet is 382 m/s
The given parameters;
mass of the wood, m₁ = 0.6 kgheight of the port, h = 2mass of the bullet, m₂ = 10 g = 0.01 kghorizontal distance traveled by the bullet, x = 4 mApply the principle of conservation of mechanical energy;
The maximum potential energy of the bullet-wood system at the top of the port = maximum kinetic energy of the system at the base of the port.
[tex]K.E_{max} = P.E_{max}\\\\\frac{1}{2} mv_{max}^2 = mgh_{max}\\\\v^2_{max} = 2gh_{max}\\\\v_{max} = \sqrt{2gh_{max}} \\\\v_{max} = \sqrt{2\times 9.8\times 2} \\\\v_{max} = 6.26 \ m/s[/tex]
Apply the principle of conservation of linear momentum to determine the initial velocity of the bullet;
let the initial velocity of the bullet = u₂[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\0.6(0) + 0.01(u_2) = 6.26((0.6 + 0.01)\\\\0.01u_2 = 3.819\\\\u_2 = \frac{3.819}{0.01} \\\\u_2 = 381.9 \ \approx 382 \ m/s[/tex]
Thus, the initial velocity of the bullet is 382 m/s
Learn more here:https://brainly.com/question/24424291
In a totally inelastic collision between two equal masses, with one initially at rest, what fraction of the initial kinetic energy is lost
Answers
Answer:
50%
Explanation:
Assuming no external forces acting during the collision, total momentum must be conserved.As one of the mass was initially at rest, the initial momentum can be written as follows:[tex]p_{o} = m* v_{1o} (1)[/tex]
If the collision is totally inelastic, both masses must move as one after the collision, so we can write the following equation:[tex]p_{f} = (m+m)* v_{f} = 2*m*v_{f}[/tex] (2)As po = pf, we can solve for vf in terms of v1o, as follows:[tex]v_{f} =\frac{v_{1o}}{2}[/tex]
The initial kinetic energy will be:[tex]K_{1o} =\frac{1}{2} * m *v_{1o}^{2} (1)[/tex]
The final kinetic energy of both masses will be as follows:[tex]K_{f} =\frac{1}{2} * 2*m *(\frac{v_{1o}}{2}) ^{2} (2)[/tex]
Rearranging in (2) we get:[tex]K_{f} =\frac{1}{2} *m *v_{1o} ^{2} *\frac{1}{2} = \frac{K_{1o} }{2}[/tex]
So, the fraction of the initial kinetic energy lost is just the half of the initial value.What is the displacement of the cross-country team if they begin at the school, run 16 kilometers and finish back at the school? Calculate the average speed and average velocity if they finish in 1 hour and 15 minutes?
Answers
Average speed is total distance, not displacement. They ran 16 kilometers and back another 16 kilometers. That’s 32 kilometers. We want to change this into meters tho. That’s the si unit for speed. So multiply that by 1000 to get 32,000 meters. Now divide that by the time. Again, convert that hour and 15 minutes into seconds because the si unit for time is seconds. Do 1*3600 and then add 15*60 to get 4,500 seconds.
32,000m/4,500s = 7.1 m/s
Average velocity is displacement over time. We already went over that the displacement is 0, so therefore average velocity is 0
We can compare these two interactions on the basis of impulse (see above), but sometimes, we are more interested in the forces (human body can withstand very large amount of impulse, if it's delivered over a long time with small forces, but we cannot withstand very large forces lasting over more than a few milliseconds, delivering relatively small impulse). In order to estimate average force from impulse, we need the duration of interaction. Suppose that the contact of the bat with the baseball in (b) lasts for 0.7 milliseconds. What is the magnitude of the average force that the bat exerts on the baseball, for the duration of contact
Answers
Complete Question
The complete question is shown on the first uploaded image
Answer:
a
[tex]I = 476 \ N \cdot s [/tex]
b
[tex]I_1 = 14.21 \ N\cdot s [/tex]
c
[tex]F = 20300 \ N [/tex]
Explanation:
Considering the first question
From the question we are told that
The force produced is [tex]F = 3400 \ N[/tex]
The duration of the punch is [tex]t = 0.14 \ s[/tex]
Generally the impulse delivered is mathematically represented as
[tex]I = F * t[/tex]
=> [tex]I = 3400 * 0.14[/tex]
=> [tex]I = 476 \ N \cdot s [/tex]
Considering the second question
The approaching velocity of the ball is [tex]v_b = 45 \ m/s[/tex]
The leaving velocity of the ball is [tex]v_l = -53 \ m/s[/tex]
The mass of the ball is [tex]m_b = 0.145 \ kg[/tex]
Generally the magnitude of the impulse delivered is mathematically represented as
[tex]I_1 = m* v_b - m * v_l[/tex]
=> [tex]I_1 = [0.145 * 45] - [0.145 * -53][/tex]
=> [tex]I_1 = 14.21 \ N\cdot s [/tex]
Considering the third question
The duration of the impact of the bat is [tex]t _1 = 0.7 \ ms = 0.7 *10^{-3} \ s[/tex]
Generally the average force exerted by the bat is mathematically represented as
[tex]F = \frac{I_1}{t_1}[/tex]
=> [tex]F = \frac{14.21 }{0.7 *10^{-3}}[/tex]
=> [tex]F = 20300 \ N [/tex]
For which scientific method do you use experimental and control groups?
A. Forming a hypothesis
B. Analyzing data
C. Drawing conclusions
D. Conducting an experiment
Answers
Answer:
Analyzing data B.
Explanation:
Answer:
D
Explanation:
Blowing into a flute can produce a sound because
A. light energy is transformed into sound energy
B. the flute warms the air
C. air expands in the flute
D. air in the flute vibrates
Answers
Answer:
Choice D
Explanation:
air in the flute causes vibrations which makes sound.
Which is formed by positive ions from a base and negative ions from an acid?
salt
vinegar
soap
carbonate
Answers
Answer:a
Explanation:
The formation of salt takes place by the sharing of positive ions from a base and negative ions from an acid. Hence, option (a) is correct.
The given problem is based on the concept and fundamentals of Neutralization. The process of neutralization is the name given to the chemical reaction between that takes place between the acid and base.
An acid is the chemical species having the negative ion, hence also known as anions.And the bases are the chemical species having the positive ions, hence they are also known as cationic species. During the chemical reaction between the acid and base, the positive ions from the base and negative ions from the an acid forms a neutral compound, known as Salt. Therefore, this reaction is also known as neutralization reaction.Thus, we can conclude that the formation of salt takes place by the sharing of positive ions from a base and negative ions from an acid. Hence, option (a) is correct.
Learn more about the Neutralization reaction here:
https://brainly.com/question/16188332
Because mass is determined from protons
and neutrons, what conclusion can you
make?
Answers
Answer:
Electrons have virtually no mass
Explanation:
I had a test an this was the right answer^
Answer: Electrons have virtually no mass
Explanation: on edpuzzle that was the answer
how does a fly function in a energy pyramid
Answers
Answer:
A pyramid of energy shows the relative amount of energy available at each trophic level of a food chain or web. On average, about 10 percent of the energy available within one trophic level is transferred to the next level.
Explanation:
What causes different colors to appear in the sky.
Answers
Answer:
The colors of the sunset result from a phenomenon called scattering. Molecules and small particles in the atmosphere change the direction of light rays, causing them to scatter. ... The short-wavelength blue and violet are scattered by molecules in the air much more than other colors of the spectrum.
Explanation:
Answer:
The scattering and reflection of light by dust particles.
An Object is thrown straight up into the air with an initial velocity of 15m/s. What is its velocity at the peak of its flight?
Answers
Answer:
0
Explanation:
The initial velocity of an object is 15 m/s when it was thrown straight up into the air.
At maximum height, the velocity of the object is equal to 0. It starts coming downward after that and falls ground. Height attained by the object is given by :
[tex]h=\dfrac{v^2}{2g}[/tex]
Hence, its velocity at the peak of its flight is equal to 0.
HELPP PLEASEEE Which issue is not a challenge an organism encounters?
A getting energy
B reproducing
C maintaining structure
D regenerating arms
Answers
Answer:
regenerating arms....
Convert 0.0000505 nanometers into scientific notation
Answers
The magnetic material is distributed this way because magnets
A
have magnetic fields that repel magnetic materials and push the shavings away.
B
have multiple magnetic fields that attract the shavings with different strengths.
C
have uneven magnetic fields that attract the shavings in random patterns.
D
have magnetic fields that flow from one pole of the magnet to the other.
Answers
Answer:
AExplanation:
Since one light is being taken away,
the rest of the light bulbs will get
more energy transfered to both
light bulbs, therefore, they will
not explode, but get brighter.
Hope this helps! <3
Since one light is being removed, more energy will be transmitted to the other light bulbs, preventing an explosion while increasing brightness. Thus, option B is correct.
What cause to magnetic fields?The majority of the electrons in some compounds, however, spin in the same direction due to their high magnetic properties.
These materials produce the strongest magnets due to their high magnetic permeability.
A magnet's magnetic strength is not the same throughout. In a bar magnet, the magnetic field is stronger around the pole than it is in the center, where the field is weaker.
This is so because the shape has an impact on how the magnetic energy in the area it occupies is distributed.
Therefore, have multiple magnetic fields that attract the shavings with different strengths.
Learn more about magnetic fields here:
https://brainly.com/question/14904083
#SPJ5
A freight train consists of two 8.00 \times 10^5~\text{kg}8.00×10 5 kg engines and 45 cars with average masses of 5.50 \times 10^5~\text{kg}5.50×10 5 kg. What force must each engine exert backward on the track to accelerate the train at a rate of 5.00 \times 10^{-2}~\text{m/s}^25.00×10 −2 m/s 2 if the force of friction is 7.50 \times 10^5 ~\text{N}7.50×10 5 N, assuming the engines exert identical forces? This is not a large frictional force for such a massive system. Rolling friction for trains is small, and consequently trains are very energy-efficient transportation systems.
Answers
Answer:
F₁ = 4.29 x 10⁵ N
Explanation:
The total force required to move the freight train with the given acceleration is given by the following formula:
F = ma + f
where,
F = Total Force Required from both engines = ?
m = equivalent mass of system = 2(8 x 10⁵ kg) + 5.5 x 10⁵ kg = 21.5 x 10⁵ kg
a = required acceleration = 5 x 10⁻² m/s²
f = force of friction = 7.5 x 10⁵ N
Therefore,
F = (21.5 x 10⁵ kg)(0.05 m/s²) + 7.5 x 10⁵ N
F = 8.575 x 10⁵ N
Now, for identical forces in each engine can be given as:
Force exerted by each engine = F₁ = F/2
F₁ = 8.575 x 10⁵ N/2
F₁ = 4.29 x 10⁵ N