Please help meeeeeeeeeeee

The heat energy needed to change the temperature of 0.93 kg  of the sample from a temperature of -1.1  to 12.2 °C is 30 KJ. Then the specific heat capacity of the sample is 2.4 KJ/ °C kg

Calorimetry is an analytical  technique used to determine the heat energy absorbed or released by  a system. The calorimetric equation relating the heat energy q with the mass of the substance m, specific heat c and temperature difference ΔT is given as:

q = m c ΔT.

Given that the mass of the sample = 0.93 kg

temperature difference   ΔT = 12.2 - (-1.1 °C ) = 13.3  °C

The heat energy absorbed by the sample is calculated as follows:

30 kJ = 0.93 kg  × c × 13.3°C

Then c = 30 kJ/ (13.3°C × 0.93 kg) = 2.4 kJ/°C kg

Therefore, specific heat of the sample is 2.4 kJ/°C kg.

Find more on calorimetry :

brainly.com/question/11477213

#SPJ1

It is necessary to study history in order to comprehend the current state of the law, and from this we may deduce that the context of legal history helps us to comprehend contemporary law.

Legal history, sometimes known as the history of law, is the study of how and why the law has changed over time. The advancement of civilizations is strongly related to the development of legal history, which operates in a larger social history context. Legal history, as defined by some jurists and legal process historians, is the technical explanation of how laws have changed over time and the recording of the evolution of those laws, with the goal of better understanding the roots of various legal concepts. Some people regard legal history as a subfield of intellectual history. Twenty-first-century historians have a more contextualized perspective on legal history, more in line with social historians' ideas.

Learn more about history here:

https://brainly.com/question/17457422

#SPJ4

A balanced equation obeys the law of conservation of mass which states that the number of reactants and products on both sides of the equation should be always equal.

An equation in which the number of atoms of each element in the chemical reaction and the total charge are found to be the same for both the reactants and products. The mass of the reactants is equal to the mass of products.

The following steps are used to balance the given equation.

Thus the balanced equation obtained is:

Mg (NO₃)₂ + 2HCl → 2HNO₃ + MgCl₂

To know more about balanced equation, visit;

https://brainly.com/question/12192253

#SPJ1      

the coordination number of Pb2+ ion in CH3NH3PbI3 is 6.

The coordination number of the Pb2+ ion in CH3NH3PbI3 can be determined by analyzing the crystal structure of the material. CH3NH3PbI3 has a perovskite structure, which is a type of crystalline structure characterized by a repeating arrangement of metal cations and anions. The Pb2+ ion in CH3NH3PbI3 is surrounded by six I- ions, forming an octahedral coordination geometry. Hence, the coordination number of Pb2+ ion in CH3NH3PbI3 is 6.

It's worth mentioning that the perovskite structure of CH3NH3PbI3 is highly favorable for the performance of solar cells. The presence of Pb2+ ion in an octahedral coordination with I- anions enhances the absorption of light, while the CH3NH3 cations provide stability to the material. This combination of favorable properties makes CH3NH3PbI3 a promising material for solar cell applications.

Learn more about coordination number:

brainly.com/question/27289242

#SPJ4

78.57mL solution could be heated to boiling by the heat evolved by the dissolution of 25.0 g of naoh.

Heat evolved by dissolution of  1 mole NaOH

= Lattice energy - hydration energy

= (-887kJ/mol) - (-932kJ/mol)

= 45kJ/mol

(Molar mass of NaOH = 39.997g/mol)

using the formula

Density = mass/volume

And

Volume = mass/density

Mass = 82.5g

density of solution = 1.05g/mL

So

Volume = (82.5g)/(1.05g/mL)

Volume  = 78.57mL

Changes in physical or chemical processes frequently include the transfer of energy. According to the rule of conservation of energy, energy is neither generated nor destroyed during any physical or chemical activity. Under other words, the universe's whole supply of energy is kept in check. We must first identify two aspects of the universe, the system and the surrounds, in order to properly comprehend the energy changes that occur throughout a reaction. The particular area of matter in a given place that is being examined during an experiment or observation is referred to as the system. Everything in the cosmos that is not a component of the system is considered the surrounds.

Learn more about Heat evolved here:

https://brainly.com/question/13220736

#SPJ4

The water in the glass bowl will start to heat up and eventually reach its boiling point, causing it to change from a liquid to a gas (water vapor) through the process of boiling.

When Marisol turns on the stove, the electric burner will heat up the glass bowl containing the water. As the temperature of the water increases, its molecules will gain more and more energy, causing them to move faster and faster.

At a certain temperature, called the boiling point, the water will start to turn into water vapor (steam) as its molecules escape from the surface of the liquid and turn into gas. This is called boiling and it's a phase change from a liquid to a gas.

The small, heavy cup in the bowl will not float because it is denser than water and will remain in the same position.

Learn more about boiling:

https://brainly.com/question/28203474

#SPJ4

Answer:

i

Explanation:

The Amylose the straight chain of the polymer of D-glucose units. The Amylopectin is the branched-chain polymer of D-glucose units.

The Amylose the straight chain of the polymer of D-glucose units.  20% of the amylopectin is  present in the starch. It is soluble in the water. It is Straight chain of structure. It contains the α-1,4-glycosidic bonds that is between two glucose of units.

The Amylopectin is the branched-chain polymer of D-glucose units.  80% of the amylopectin is present in the starch. It is insoluble in the water. It is Branched structure. It contains the α-1,4-glycosidic bonds between the two glucose units of the straight chain and the α-1,6-glycosidic bonds is the branching.

To learn more about Amylopectin here

https://brainly.com/question/29445702

#SPJ4

Dalton's experiments advanced our understanding of the atom without the use of sophisticated scientific tools that are available today.

In the late 18th and early 19th centuries, Dalton carried out a series of experiments that led him to propose the atomic theory, which revolutionized the way scientists thought about matter.

Despite his lack of access to modern instruments, Dalton was able to make several important observations about the behavior of gases, which led him to propose that all matter is composed of small, indivisible particles called atoms. Dalton also suggested that atoms of different elements have different properties and combine in fixed ratios to form compounds.

While Dalton's atomic theory has been modified and refined over the years, his experiments laid the foundation for our understanding of the structure and behavior of matter. Dalton's work demonstrates the importance of careful observation and deduction in scientific inquiry, even in the absence of advanced technology.

Learn more about atom:

brainly.com/question/1566330

#SPJ4

The empirical formula of a compound can be determined by finding the simplest whole-number ratio of the atoms present in the compound. To do this, the percentage composition of each element in the compound must first be converted into its corresponding mass.

In this case, the percent composition data for each element can be converted to moles by dividing each value by the atomic mass of the element in question. For example, for carbon: 69.42 g C / (12.01 g/mol) = 5.787 mol C.For nitrogen: 11.57 g N / (14.01 g/mol) = 0.823 mol N.For oxygen: 13.22 g O / (16.00 g/mol) = 0.826 mol O

Next, the moles of each element is divided by the smallest number of moles of the elements present to obtain the simplest whole-number ratio of atoms in the compound. In this case, the smallest number of moles is 0.823 for nitrogen.

For example 5.787 mol C / 0.823 = 6.98 (round down to 6). 0.823 mol N / 0.823 = 1.00 (unchanged).0.826 mol O / 0.823 = 1.00 (unchanged)

Therefore, the empirical formula of this compound is C6HNO, where C represents 6 carbon atoms, H represents an unknown number of hydrogen atoms, N represents 1 nitrogen atom, and O represents 1 oxygen atom.

You can read more about empirical formulas at https://brainly.com/question/1439914#:

#SPJ4

Mg is a metal containing two valence electrons and oxygen is a gas with two non-metals. Mg donate the two electrons to oxygen and form an ionic bond in the compound MgO.

Ionic bonds are formed between a metal and non metal. Metals are electropositive and easily loss electrons to achieve octet. Non-metals are mostly electronegative and electron deficient and they gain electrons to attain octet in valence shell.

Mg is a second group metal containing two extra electrons in its valence shell. Hence, Mg easily loss these electrons to form Mg²⁺ ions. Oxygen contains 6 valence electrons and it must gain two more to achieve octet.

Therefore, oxygen gain two electrons from Mg and forms O²⁻ . These oppositely charged ions attracts electrostatically and form the ionic bond between the atom. Hence, MgO is an ionic compound.

Find more on MgO:

https://brainly.com/question/15240596

#SPJ1

Concentrated HCl is considered to be more reactive than dilute HCl acid.

This is because concentrated HCl has a higher concentration of hydrogen ions (H+) compared to dilute HCl, meaning that it can more easily donate hydrogen ions in reactions and therefore be more reactive. This property is related to the acidity of the solution, which is determined by the concentration of hydrogen ions in the solution. In general, the more hydrogen ions a solution contains, the more acidic the solution is and the more reactive it is.

Learn more about  Concentrated here:

https://brainly.com/question/10725862

#SPJ4

If two electrodes have a source of potential difference of 100v connected to them, there will be infinite number of equipotential surfaces exists in space between them.

The surface on which all points have equal potential is known as equipotential surfaces. The points having the same potential under an electric field are called equipotential points. Similarly the connecting two equipotential points are called equipotential lines.

Now these all points if lie on a surface that surface is referred to as equipotential surface. Distribution of these points depends on the potential they have.

Two equipotential surfaces never intersect each other. Now, if two electrodes are connected to a 100 V source, there will be infinite number of equipotential surfaces within the space between them.

Find more on equipotential surfaces:

https://brainly.com/question/14675095

#SPJ1

During glycolysis NAD reduces to form NADH and H⁺. Generally, reduction is gain of electrons and thus gaining of negative charge. The atom is said to be reduced when it acquire electrons.

Glycolysis is defined as a process in which glucose (sugar) is partially broken down by cells in enzyme reactions that do not need oxygen. Cells use one of the method to produce energy known as glycolysis.

Nicotinamide adenine dinucleotide (NAD+) is one of the important molecule used in the process of glycolysis. It is a cofactor which usually regulates metabolism through its electron transport function in the redox reaction in glycolysis and the TCA cycle, In glycolysis, NAD+ reduces forming NADH and H⁺.

NAD reduces to form NADH and H⁺ during glycolysis, so it gains electrons during the process.

Learn more about NAD⁺ from the link given below.

https://brainly.com/question/1581364

#SPJ4

The frequency you are referring to is likely the resonant frequency of the vocal tract, which is responsible for the production of speech sounds.

When we breathe in air, the vocal tract is filled with a mixture of gases, including oxygen, nitrogen, and carbon dioxide, which vibrate at a certain frequency when we speak.

If the person's breathing passage were filled with carbon dioxide instead of air, the resonant frequency of the vocal tract would change. Carbon dioxide has a different acoustic impedance than air, which means that sound waves travel through it at a different speed and with different frequencies.

According to the literature, the speed of sound in carbon dioxide at room temperature (20°C) and standard pressure (1 atm) is about 259 m/s, which is lower than the speed of sound in dry air (about 343 m/s).

However, in general, the resonant frequency of the vocal tract would decrease by a few percent when filled with carbon dioxide instead of air, assuming that the temperature and pressure remain constant.

Learn more about carbon dioxide here:

https://brainly.com/question/3049557

#SPJ4

Answer:

Local action refers to the activities taken by a person or organization, typically within a defined area or locality, to address a particular issue or problem. Examples of local action can include the formation of local clubs and organizations, the establishment of community gardens, or the creation of educational campaigns.

Polarization refers to the tendency of individuals and groups to engage in more extreme forms of behavior, such as extreme political views, extreme religious views, or extreme social views. This often occurs when individuals or groups feel that their beliefs, opinions, and values are not being heard or respected by others. Polarization can lead to increased conflict and discord within a society.

All compounds made from carbon are water soluble, which is not a property of carbon.

Due to its highly stable structure and the bonds formed, carbon is insoluble in any solvent. Carbon needs other atoms attached to it to become polar enough to dissolve in water. For example, carbon does not dissolve in water, but carbon dioxide (CO2) does. Most organic compounds are nonpolar and therefore do not mix with polar molecules such as water. Therefore, organic matter is generally insoluble in water. All compounds made from carbon are water soluble, which is not a property of carbon. Elemental carbon is an inert substance, insoluble in water, dilute acids and bases, and organic solvents. At high temperatures, it combines with oxygen to form carbon monoxide or carbon dioxide.  

Learn more about carbon

brainly.com/question/19886129

#SPJ4

To solve this problem, we need to use the chemical formula of table salt (NaCl) and sugar (C12H22O11).

1 mole of NaCl produces 1 mole of CO2, which has a mass of 44 g. 1 mole of C12H22O11 produces 1 mole of CO2, which has a mass of 44 g. We have 2.80 g of CO2, which is equivalent to 2.80/44 = 0.064 moles of CO2. From 0.064 moles of CO2, we can calculate the amount of NaCl and C12H22O11: 0.064 moles of CO2 is equivalent to 0.064 moles of NaCl, which has a mass of 0.064 x 58.44 g = 3.75 g.

0.064 moles of CO2 is equivalent to 0.064 moles of C12H22O11, which has a mass of 0.064 x 342 g = 21.88 g. The total mass of NaCl and C12H22O11 is 3.75 g + 21.88 g = 25.63 g. The mass percentage of table salt (NaCl) in the mixture is 3.75 g / 25.63 g x 100 = 14.7%.

You can read more about  table salt at https://brainly.com/question/5528908

#SPJ4

False. C++ has a built-in data type called std::string, which is designed to store strings of data. It is a class defined within the standard C++ library, and it is a part of the C++ Standard Template Library (STL).

The Standard Template Library (STL) is a collection of data structures, algorithms, and other programming tools for use in software development. It is a library of generic programming components that can be used to implement various data structures and algorithms, such as vectors, lists, maps, and queues. The STL is written in the C++ programming language and is included in most C++ compilers. The STL consists of four components: containers, iterators, algorithms, and functions. Containers are used to store and manipulate data, iterators are used to traverse data, algorithms are used for common operations such as searching and sorting, and functions provide additional functionality. The STL is designed to be efficient, flexible, and extensible. It is also designed to be portable, meaning that the same code can be used on different types of computers. By using the STL, developers can save time and effort in creating their own custom data structures and algorithms.

To learn more about algorithms
https://brainly.com/question/2285021
#SPJ1

One of the most common sources of error in the experimental determination of the number of manual pages is human error.

Human error is defined as an unintentional action or decision that leads to a negative outcome. It is a broad term which encompasses any mistake, mishap, or lack of foresight that results in undesired consequences. It can include mistakes in judgment, oversight, miscalculation, insufficient knowledge or experience, inattention, or negligence. Human error is often a major factor in accidents, medical errors, and other negative outcomes. It is also a major contributor to organizational and operational failures.

This can occur when a researcher misreads a page, enters incorrect data into a spreadsheet, or fails to count all of the pages in the manual. Additionally, errors can occur due to the type of equipment used to measure the number of pages. For example, if a manual page counter is not calibrated correctly, the results may be inaccurate. Finally, if the manual pages are not organized and labeled properly, it can lead to discrepancies between the actual number of pages and the number reported.

To learn more about  human error
https://brainly.com/question/28746643
#SPJ4

The total pressure of the wet gas mixture is [tex]78.5 kPa.[/tex]

Water vapour is another component of the wet gas mixture, but it is not taken into account in the formula above because it has no impact on the overall pressure. When liquid water is heated to the point of evaporation, it turns into the gas known as water vapour. Its partial pressure is influenced by the temperature and relative humidity of the atmosphere and is mostly made up of hydrogen and oxygen. Because of this, the total pressure of the wet gas combination is calculated without taking into account water vapour.This is calculated by adding the partial pressures of nitrogen (53.0 kPa) and helium (25.5 kPa). Mathematically, this is represented as

[tex]Ptotal = Pnitrogen + Phelium \\\\ = 53.0 + 25.5\\\\ = 78.5 kPa.[/tex]

Therefore,The total pressure of the wet gas mixture is [tex]78.5 kPa.[/tex]

learn more anout wet gas Refer:brainly.com/question/14356335

#SPJ4

Answer: Summary: The volume (V) of a gas changes inversely with the pressure (P) of the gas if there is no change in the temperature and the amount of gas.

Explanation:

Hope this helped with your question! Also, i am happy to help!

The mass of exactly 100 chlorine atoms is 3.545g with the average atomic mass of 35.45 amu,

To calculate this, we need to first understand the atomic mass of chlorine.

According to [1], the atomic mass of chlorine is 35.5g per 6.022 x 10^(23) atoms.

This means that one atom of chlorine has a mass of (35.5g)/(6.022 x 10^(23)).

To calculate the mass of 100 chlorine atoms, we must multiply the mass of one chlorine atom with 100,

giving us (35.5g)/(6.022 x 10^(23)) x 100 = 3.545g.

[2] and [3] confirm the atomic mass of chlorine as 35.45 amu.

the product is a single diastereoisomer, and can be determined by examining the relative configurations of the starting materials.

Learn more about chlorine here:

https://brainly.com/question/14962130

#SPJ4

The term mole concept is used here to determine the number of moles of NiO. Here 18.2 g of NiO contains 0.243 moles.

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

Here the given mass of NiO is 18.2 g and the molar mass is 74.6928 g/mol.  The mass of one mole of molecules of a substance is known as the molar mass. It is expressed in gmol⁻¹.

Then 18.2 g of NiO is converted into moles as:

Number of moles = 18.2 g/ 74.6928 g/mol = 0.243 moles.

Thus 18.2 g of NiO is converted into 0.243 moles.

To know more about the mole concept, visit;

https://brainly.com/question/15209553

#SPJ1

If one can of diet soda contains 180 mg of aspartame, c14h18n2o5 then it contains 7.3 x [tex]10^19[/tex]nitrogen atoms.

The molar mass of aspartame, C14H18N2O5, is 294.304 g/mol. In one can of diet soda, there are 180 mg of aspartame, which is equivalent to 0.18 g.

So, the number of moles of aspartame in the can of soda is 0.18 g / 294.304 g/mol = 6.09 x [tex]10^-5[/tex] moles.

The number of nitrogen atoms in aspartame is 2.

So, the number of moles of nitrogen atoms in the can of soda is 6.09 x  [tex]10^-5[/tex] moles * 2 = 1.22 x [tex]10^-4[/tex] moles of nitrogen atoms.

To convert moles to number of atoms, we multiply the number of moles by Avogadro's number, which is 6.022 x [tex]10^23[/tex] atoms/mol.

So, the number of nitrogen atoms in the can of soda is 1.22 x  [tex]10^-4[/tex] moles * 6.022 x[tex]10^(23)[/tex] atoms/mol = 7.34 x [tex]10^19[/tex] nitrogen atoms.

Rounding to the appropriate number of significant digits, the answer is 7.3 x [tex]10^19[/tex] nitrogen atoms.

Learn more about aspartame here:

https://brainly.com/question/10797758

#SPJ4

The amount of HCl required to neutralize KOH can be calculated using the concept of stoichiometry. so using this answer we get that we require 5.3l of

The balanced chemical equation for the neutralize reaction between HCl and KOH is:

HCl + KOH → H2O + KCl

1 mole of HCl reacts with 1 mole of KOH to produce 1 mole of water and 1 mole of potassium chloride.

The number of moles of HCl required can be calculated by dividing the volume of KOH (3.5 L) by its molarity (1.2 M), which gives us:

n(HCl) = 3.5 L * 1.2 M = 4.2 moles

Then, the volume of HCl required can be calculated by dividing the number of moles by its molarity (0.8 M):

v(HCl) = 4.2 moles / 0.8 M = 5.3 L

So, the answer is: a. 5.3 L.

Learn more about neutralize here:

https://brainly.com/question/15347368

#SPJ4

The volume of the balloon if five more same-sized breaths are added to the balloon is 4L.A measurement of three-dimensional space is volume. Numerous imperial or US customary units, as well as SI-derived units, are frequently used to quantify it quantitatively.

The quantity of air a balloon can contain is measured by its volume. A balloon's volume is expressed in cubic feet or meters. A balloon can contain 14.5 cubic feet of air on average. The size of the balloon, the volume of air within, and the temperature of the air all have an impact on the volume of the balloon.

The amount of space occupied by a substance or item, or the volume of space enclosed within a container.

The volume of inflated balloon is 1.5 L

[tex]1.5 X \frac{1 breath}{3breath} =0.5[/tex]

The final volume after 8 breaths

[tex]0.5 X \frac{8 breath}{1 breath} =4 L[/tex]

Thus, the volume of the balloon after five more breaths is 4.5 L.

to Learn more about volume, pls click here:

brainly.com/question/1578538

#SPJ4

Two electron pairs, carbon share in order to complete its valence shell. So, right choice is option (b).

Carbon is an element of periodic table with atomic number six and atomic mass or mass number 12g. The symbol which denotes the carbon atom is "C". The valance shell is the outer shell or orbital of an atom. The electronic configuration of carbon is equals to 2, 4 that is carbon has 4 electrons in its valence electron shell. The covalent bonds are formed between four carbon and hydrogen atoms. So, carbon shares 4 electrons i.e 2 pairs of electrons to other atoms to complete the valance shell or bonding. So, the right answer is 2 pairs of electron.

To learn more about valance shell, refer:

https://brainly.com/question/28337734

#SPJ4

Complete question:

how many electron pairs does carbon share in order to complete its valence shell?group of answer choices:

a) 4

b)2

c)3

d)1

The pH of solution is 11. Option b is correct.

The way to measure of how acidic/basic water is pH. The range goes from 0 - 14, with 7 being neutral. pH of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water.

The full form of pH is “Potential of Hydrogen”. pH is known as the negative logarithm of H+ ion concentration.

pH = -log(H+)

Here, H+ = [tex]1 \times 10^{-11}[/tex]

pH = [tex]-\log{10^{-11}}[/tex]

pH = 11

To know more about the pH, here

brainly.com/question/30560212

#SPJ4