PLEASE HELP ME.!
This illustrates which stage of meiosis?

A) Anaphase II

B) Metaphase II

C) Prophase II

D) Telophase II

Answer:

[tex]\boxed {\boxed {\sf AlN}}[/tex]

Explanation:

The goal when forming compounds is to achieve a net charge of 0.

We are given aluminum with a charge of 3+  and nitrogen with a charge of 3-.

These charges are equal and opposite, so one of each will equal 0.

Therefore, we do not need any subscripts. List the metal's symbol (aluminum) then the nonmetal.

Th formula for the compound, which is aluminum nitride, is AlN.

Answer:

There are three ways to make solids dissolve faster: Break the solute into smaller pieces. Stir the mixture. * Heat the mixture.

Explanation:

Substances can dissolve in water three ways—by dissociation, dispersion, and ionization.

Answer:Calcium carbonate (CaCO3), essentially, is an ionic compound having the bivalent calcium and carbonate ions. But the carbonate anion is a polyatomic species. The carbon atom is bonded to all the three oxygen atoms by covalent bonds - two carbon-oxygen single bonds and one carbon-oxygen double bond.

Explanation:So it's ionic hope this helps u. Btw may i have brainlist plz.

hmm, i not sure i come back later with the answer.

Answer:

volume of brick= length × breadth × height

=0.000018 ×6.5×17.3

=

Answer:

na2 co3

Explanation:

sodium carbonate formula

Answer:

your answer is C.

Explanation:

this is what it would be like

O

|

|

Na+ C Na+

/ \

/ \

O- O-

The volume of carbon dioxide is formed is Option C i.e. 80 ml.

Given that,

Based on the above information, the calculation is as follows:

Here the volume should be 80ml

Therefore we can conclude that The volume of carbon dioxide is formed is Option C i.e. 80 ml.

Learn more: brainly.com/question/16911495

Answer: Earthquake location

Explanation:

Answer:

Volcano chains and arcs, and earthquake locations

Answer:

Describe how a sample of copper chloride crystals could be made from copper carbonate and dilute hydrochloric acid. Add excess copper carbonate to hydrochloric acid in a beaker, stirring until there is no further reaction. Filter the mixture to remove the remaining copper carbonate, then heat the remaining solution to the point of crystallisation.

Explanation: Hope this is right.

Answer: Ok I think The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Carbon, or 12.0107 grams. Note that rounding errors may occur, so always check the results. Use this page to learn how to convert between moles Carbon and gram. 12 grams

This means that the atomic mass or atomic weight (12 grams) of carbon is equal to exactly 1 mole of carbon.

hope this helps have a awesome night/day❤️✨

Explanation:

There are 36 grams in 3.00 moles of carbon.

HOW TO CALCULATE MASS:

Learn more at: https://brainly.com/question/15743584?referrer=searchResults

Answer:

The answer is a trench

Answer:

The correct answer is 639 L H₂

Explanation:

We use the ideal gas equation:

We have the following data:

n = 28.3 mol

T= 297 K

P= 1.08 atm

R= 0.082 L.atm/K.mol (gas constant)

We introduce the data in the gas equation to calculate the volume (V):

PV=nRT

⇒V =nRT/P = (28.3 mol x 0.082 L.atm/K.mol x 297 K)/(1.08 atm) = 638.2 L ≅ 639 L

Therefore, the correct option is  639 L H₂

Answer:

639 L H2

Explanation:

took the quiz

ur welcome

Answer:

Reaction:

[tex]2Mg + Br_{2} >> 2MgBr[/tex]

Explanation:

Hello there, I think this is a limiting agent question.

When 3 moles of Mg is reacted with 2 moles of Br2, because of ratio, we just need 1.5 moles of Br2, so Mg is a limiting agent.

So 3 moles of Mg will make 3 moles of MgBr

Taking into account the stoichiometry of the reaction, 2 moles of magnesium bromide are formed when 3.0 moles of magnesium reacts with 2.0 moles of bromine.

The balanced reaction is:

Mg + Br₂ ⇒ MgBr₂

Then, by stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

On the other side, the limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.

To determine the limiting reagent, it is possible to a simple rule of three as follows: if by stoichiometry 1 mole of bromine reacts with 1 moles of magnesium, how much moles of bromine will be needed if 3moles of magnesium react?

[tex]moles of bromine=\frac{1 moles of bromineX3 mole of magnesium}{1 mole of magnesium}[/tex]

moles of bromine=3 moles

But 3 moles of bromine are not available, 2 moles are available. Since you have less moles than you need to react with 3 moles of magnesium, bromine will be the limiting reagent.

Finally, the following rule of three can be applied: if by reaction stoichiometry, 1 mole of bromine forms 1 mole of magnesium bromide, 2 moles of bromine forms how many moles of magnesium bromide?

[tex]moles of magnesium bromide=\frac{2 moles of bromine*1 moles of magnesium bromide}{1 mole of bromine}[/tex]

moles of magnesium bromide= 2 moles

In summary, 2 moles of magnesium bromide are formed when 3.0 moles of magnesium reacts with 2.0 moles of bromine.

Learn more about stoichiometry of the reaction:

Answer:

The answer to your question is: 71 g of Chlorine

Explanation:

Na = 46 g

Cl = ?

NaCl = 117 g

Equation

                     2 Na     +     Cl₂   ⇒   2 NaCl          

                     46g              X              117g

If we consider the law of conservation of matter, we know that the mass of the reactants equals the mass of the products, then

                   mass Na + mass Cl₂  = mass NaCl

                    46 g + X = 117

                    X = 117 - 46

                   x = 71 g of Chlorine        

We can use the equation for dilutions that relates concentration and volume:

[tex]M_1V_1=M_2V_2[/tex]

where M is the molarity, V is the volume, and 1 and 2 refer to the initial and final states of the solution, respectively. Here, we are given the molarity of the initial solution and the volumes of the initial and final (diluted) solutions. To find the final concentration (i.e., the molarity of the diluted solution), we would be solving for M₂:

[tex]M_2=\frac{M_1V_1}{V_2} = \frac{(0.55 \text{ M})(145 \text{ mL})}{250 \text{ mL}} \\ M_2 = 0.319 \approx 0.32 \text{ M}.[/tex]

The molarity is given to two significant figures as both our M₁ and V₂ are given to two significant figures.

Note: Although our volumes are in mL instead of L, we do not need to convert them to L for the purposes of our calculation since we would be multiplying our V₁ and V₂ by a common factor that would cancel out in division. All that matters is the ratio between the two volumes, which is the same whether the volumes are in mL or in L.

---

We follow the exact same procedure in the second question as we did in the first problem: solve for M₂ given M₁ = 9.02 M, V₁ = 35.0 mL, and V₂ = 45.0 mL:

[tex]M_2=\frac{M_1V_1}{V_2} = \frac{(9.02 \text{ M})(35.0 \text{ mL})}{45.0 \text{ mL}} \\ M_2 = 7.02 \text{ M}.[/tex]

Using the concept of Avogadro's number, the number of atoms present is 4.4 * 10^24 atoms.

Professor Avogadro provided a nice way of calculating the number of atoms in a molecules by the use of the Avogardro's number. Now we know that 1 mole of a substance contains about 6.02 * 10^23 atoms, molecules ions etc.

Hence;

1 mole of sulfur dioxide contains 6.02 * 10^23 atoms

7.32 moles of sulfur dioxide contains 7.32 moles  * 6.02 * 10^23 atoms/1 mole

= 4.4 * 10^24 atoms.

Learn more about Avogadro's number: https://brainly.com/question/1445383?

Answer:

The piece of wood was less dense than the water.

Explanation:

When an object has a lower density than water, it will float on the water.

Answer:

The cholesterol in your blood comes from two sources: the foods you eat and your liver. Your liver makes all the cholesterol your body needs.

Answer:

The liquid decreases in temperature and its particles lose kinetic energy.

Temperature is proportional to kinetic energy, so if temperature decreases, kinetic energy decreases. Energy has been removed from the liquid, because it is in the air

Answer:

A lightning

Explanation:

Answer:

They both have atmospheres. Also, both planets have more than one moon.

Answer:

pH = 3.69

Explanation:

HCl is a strong acid. It will disscociates completely into dissoluted ions such that,

[tex][H^+]=2\times 10^{-4}\ M[/tex]

The formula for pH is given by :

[tex]pH=-log[H^+]\\\\pH=-log(2\times 10^{-4})\\\\pH=3.69[/tex]

So, the pH of the solution is 3.69.

The answer to your question is 4.

Answer:

19 m/s

Explanation:

57/3

Answer:

Na2SO4 means: two moles sodium (45.98 g), one mole sulfur (32.06 g), and four moles oxygen (64.00 g) combine to form one mole of sodium sulfate (142.04 g).

Explanation:

Answer:

As we can see in the formulae, Na₂SO₄

We can see that 4 is the subscript of O and that means There are 4 atoms of oxygen.

Answer: D. Synthesis

Explanation:

Sodium Oxide + Water = Sodium Hydroxide

Answer: The answer is 4320

Explanation:

I got the answer correct