please help me will give brainlies

What does Le Châtelier's principle predict will happen to a system if equilibrium is upset in the following ways? (2 points)

Additional reactant is added. (0.5 point)


Additional product is added. (0.5 point)


Heat is added. (0.5 point)


Pressure is increased in a gaseous system. (0.5 point)

Please Help Me Will Give BrainliesWhat Does Le Chtelier's Principle Predict Will Happen To A System If

Answers

Answer 1

Le Châtelier's principle predicts the following outcomes if equilibrium is upset in the following ways:

If additional reactant is added, the equilibrium will shift towards the products to maintain a balance between the reactants and products.

If additional product is added, the equilibrium will shift towards the reactants to maintain a balance between the reactants and products.

If heat is added, the equilibrium will shift in the direction that absorbs heat to counteract the increase in temperature. If heat is removed, the equilibrium will shift in the direction that releases heat to counteract the decrease in temperature.

If pressure is increased in a gaseous system, the equilibrium will shift towards the side with fewer moles of gas to reduce the pressure. If pressure is decreased, the equilibrium will shift towards the side with more moles of gas to increase the pressure.


Related Questions

A designated driver is one who, in a group of two or more people that will be drinking, agrees to drink only one or two alcoholic beverages and then drive the others home safely.
True or False?

Answers

The given statement is false.

What is alcoholic beverages ?

Any fermented beverage that contains the intoxicating ingredient ethanol (CH3CH2OH), such as wine, beer, or distilled spirits, is considered to be an alcoholic beverage. The discussion on alcoholic beverages is brief.

What is drive ?

Driving refers to controlling or riding in a motor vehicle. Drive a go-kart, a bus, or a car. Drive is one of those multipurpose words with several applications. In a broad sense, it has to do with pushing or pushing in a certain direction; drive and go go hand in hand.

Therefore, given statement is false.

Learn more about alcoholic beverages from the given link.

https://brainly.com/question/29791214

#SPJ1

which statement is true of water's tensile strength? which statement is true of water's tensile strength? (a) it results from hydrogen bonding. (b) it helps to pull water through plants. (c) it involves both cohesion and adhesion. both (a) and (b). (a), (b), and (c).

Answers

The statement that is true of water's tensile strength is: it involves both cohesion and adhesion. Option A, B and C are correct.

Tensile strength refers to the ability of a liquid to resist being pulled apart. In the case of water, its tensile strength is due to both cohesion, the attraction between water molecules, and adhesion, the attraction between water and other surfaces.

Water's hydrogen bonding creates strong cohesive forces between water molecules, allowing them to stick together and resist being pulled apart. Meanwhile, water's adhesion allows it to stick to other surfaces, such as the walls of a narrow tube, which helps to pull water through plants.

Therefore, while both statements (a) and (b) are partially correct, statement (c) is the most accurate as it encompasses both cohesion and adhesion, which together contribute to water's tensile strength.

To know more about tensile strength here

https://brainly.com/question/13111132

#SPJ4

Which of the following salts would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a liter of water?
Select one:
a. Ba³(PO⁴)²K³p =1.3 x 10–²⁹
b. Pb³(PO⁴)² K³p= 3.0 x 10–⁴⁴
c. Ca³(PO⁴)² K³p = 1.0 x 10–²⁵
d. Sr³ (PO⁴)² K³p = 1.0 x10—³¹

Answers

The salt that would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a litre of water is the one with the highest Kₛp value. i.e. option B

The Kₛp value indicates the solubility product constant, which is a measure of the solubility of a salt in water.

The higher the Kₛp value, the more soluble the salt is in water, and therefore the higher the concentration of ions in solution.

Out of the given options, the salt with the highest Kₛp value is Pb³(PO⁴)² with a Kₛp value of 3.0 x 10–⁴⁴.

Therefore, this salt would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a litre of water.

Therefore the correct option is (b.) Pb³(PO⁴)² K³p= 3.0 x 10–⁴⁴

To know more about Kₛp values, refer here:

https://brainly.com/question/12961072#

#SPJ11

The process of photosynthesis produces which of the following? HELP

oxygen

carbon dioxide

energy

glucose

Answers

Answer:

Explanation:

glucose and oxygen

Which of the following CANNOT be the chemical symbol for an element?
A)Ca
B)Se
C)B
D)H2

Answers

H2 cannot be the chemical symbol for an element.

Chemical elements, functional groups, and compounds are all denoted by chemical symbols, which are shorthand abbreviations. Chemical elements are typically represented by one or two letters from the Latin alphabet, with the first letter capitalized.

Dihydrogen is referred to as H2. It is a gas molecule, an elemental molecule, and an elemental hydrogen. Dihydrogen is not a name for an element in the periodic table.

Two hydrogen atoms are linked by a single bond to form the elemental molecule known as dihydrogen. It serves as a fuel, an electron donor, an antioxidant, a human metabolite, and a component of the food packaging gas. It is a gas molecule, an elemental molecule, and an elemental hydrogen.

To know about chemical

https://brainly.com/question/26487468

#SPJ4

Which of the following statements regarding a correlation coefficient of 0.60 for two variables Y and X is most accurate? This correlation:
A) is significantly different from zero.
B) indicates a positive causal relation between the two variables.
C) indicates a positive covariance between the two variables.

Answers

The most accurate statement regarding a correlation coefficient of 0.60 for two variables Y and X is significantly different from zero. Option A is the correct answer.

A correlation coefficienb of 0.60 indicates a moderate positive relationship between the two variables, which is significantly different from zero. This means that there is a statistically significant association between the two variables, but it does not necessarily indicate a causal relationship or the direction of the relationship between the two variables.

Additionally, the correlation coefficient measures the strength and direction of a linear relationship between two variables, and does not capture non-linear relationships or other types of associations between the variables.

To know more about the correlation coefficient, here

brainly.com/question/15577278

#SPJ4

iron(III) chromate lithlumn nitrate
iron(III) nitrate + lithium chromate

Answers

The reaction you have written is a chemical equation for a precipitation reaction between iron(III) nitrate and lithium chromate, which results in the formation of iron(III) chromate and lithium nitrate. Precipitation reactions occur when two solutions are mixed and a solid product is formed, which typically settles at the bottom of the container. The equation is balanced, meaning that the number of atoms of each element is equal on both sides of the arrow. This is an important aspect of chemical reactions, as the law of conservation of mass states that matter cannot be created or destroyed in a chemical reaction.

What is the total number of atoms in the following formula? CaBr₂ 4 3 1 2​

Answers

Answer:

3 atoms

Explanation:

There is one calcium atom (Ca) and two Bromine atoms (Br2)

How many moles are present in 64.7 g of NaNO3?

Answers

0.76 moles are present in 64.7 g of NaNO[tex]_3[/tex]. a mole is a proper scientific unit used to measure significant amounts.

What is mole?

In chemistry, a mole is a proper scientific unit used to measure significant amounts of extremely small things such as atom, molecules, as well as other designated particles. It is also spelt mol.

The mole denotes a massive amount of units, 6.02214076 1023. The mole was established by the General Conference on Measurement and Weights as this amount again for International System of Units (SI).

mole = mass/ molar mass

         = 64.7 /84.99

         =0.76moles

Therefore, 0.76 moles are present in 64.7 g of NaNO[tex]_3[/tex].

To learn more about mole, here:

https://brainly.com/question/15209553

#SPJ9

According to this week's lecture materials, scientists estimate that sea levels will rise between approximately 1 and 5 meters. There are many factors that contribute to this global change. Which of the following choices is NOT one of them?
-Melting glaciers
-None of the other choices are correct.
-Man-made CO2 emissions
-The release of methane and carbon dioxide stored in the earth's biosphere

Answers

None of the other choices are correct. Because all the other choices are the factors which contribute to the sea level rise.

What are the major contributors to sea level rises?

Sea level rise is caused mainly by two factors linked to global warming, those are: the added water from the melting ice sheets and the glaciers, and the expansion of seawater as it is getting warm. The ice melting from land into the ocean, warming waters which expand, the slowing Gulf Stream, and the sinking land are all contribute to sea level rise.

How do the scientists determine if sea levels are rising?

Sea level is mainly measured by using the tide stations and the satellite laser altimeters. Tide stations around the world tell us what is occurring at a local level, that is the height of the water as measured along the coast relative to a specific point on land.

Learn more about sea level rises at: https://brainly.com/question/14827965

#SPJ4

What is the molecular formula for a compound that is 92.24% carbon and 7.76% hydrogen and has a molar mass of 78.12g?

Answers

The empirical formula of a compound gives the whole number ratio of atoms of various elements. The molecular formula of the compound is C₆H₆.

What is Molecular formula?

The molecular formula of a compound is defined as the formula which gives the actual number of atoms of various elements present in one molecule of the compound.

Here 92.24 % 'C' = 92.24 g

7.76 % 'H' = 7.76 g

Number of moles (n) = Given mass / Molar mass

'n' of 'C' = 92.24 / 12 = 7.68 moles

'n' of 'H' = 7.76 / 1 = 7.76 g

Number of atoms of 'C' = 7.68 / 7.68 = 1

Number of atoms of 'H' = 7.76 / 7.68 = 1

So empirical formula is CH.

The molecular weight of CH = 13

Number of atoms of each element = 78.12 / 13 = 6

Thus the molecular formula is C₆H₆.

To know more about molecular formula, visit;

https://brainly.com/question/28647690

#SPJ1

sodium has 11 electrons arranged in three energy levels. the outer level has only one electron. in order to become stable, the atom loses an electron thus exposing the previous level with 8 electrons and subsequently becomes an ion with

Answers

The atom loses an electron in order to reach a stable state, revealing the level with 8 electrons previously, and transforms into an ion with one positive charge.

How can you determine an atom's ground state?

When all of the electrons in an atom are at their lowest energy levels, this is known as the ground state. The energy level with the least energy out of the four that are visible is level K.

What is sodium's energy in its ground state?

The electron configuration in sodium's ground state is 1s22s22p63s1. The primary quantum number (n), the orbital (s, p, d, or f), and the total number of electrons are used to represent electron configurations. The total number of electrons is expressed as a superscript.

To learn more about electronic configuration of sodium visit:

brainly.com/question/19589767

#SPJ1

If the equilibrium constant for the reaction is greater than 1.0, and equal amounts of Q and Rare mixed together, then the reaction will proceed to generate more ___. If the equilibrium constant for the reaction is between 0 and 1, and equal amounts of Q and Rare mixed together, then the reaction will proceed to generate more ___If Keq = 4, and the starting concentrations of Q and Rare both 1.4 uM, then the equilibrium concentration of Q is ____ uM and the equilibrium concentration of R is ____uM

Answers

The concentration of R at Equilibrium is 2.24 microMolar and the concentration of Q at Equilibrium is 0.56 microMolar.

What is Equilibrium constant ?

The equilibrium constant (K) is a measure of the extent to which a chemical reaction has proceeded towards equilibrium, and is defined as the ratio of the concentrations of products to the concentrations of reactants at equilibrium, with each concentration raised to the power of its stoichiometric coefficient. In other words, for a chemical reaction of the form:

aA + bB ⇌ cC + dD

The equilibrium constant is given by:

K = [C]^c [D]^d / [A]^a [B]^b

Where [X] represents the concentration of species X, and a, b, c, and d are the stoichiometric coefficients of species A, B, C, and D, respectively. The equilibrium constant is a dimensionless quantity, and its value depends only on the temperature and pressure at which the reaction is taking place. A larger value of K indicates that the reaction has proceeded further towards the product side at equilibrium.

K = R/Q

4=1.4+x/1.4-x

Therefore, x =0.84

To learn more about the Equilibrium constant, click the given link ;

https://brainly.com/question/26487468

#SPJ4

The qualitative analysis experiment you did is actually an abbreviated version of a much larger analysis scheme in which many different cations are separated and identified. Suppose a mixture contains Ag+, K+, NH4+, Hg22+, Pb2+, Mg2+, Sr2+, Ba2+, Cu2+, Al3+ and Fe3+.
(a) Which of the following ions could you separate, by causing them to precipitate, with the addition of HCl? (Hint: HCl is a source of chloride ions. Select all that apply.)
Ag+ K+ NH4+
Hg22+ Pb2+ Mg2+
Sr2+ Ba2+ Cu2+
Al3+ Fe3+

Answers

By inducing them to precipitate, the following ions could be separated by adding HCl:

Ag+, Hg22+, Pb2+

What is HCl?

Hydrochloric acid, sometimes known as HCl, is a potent, extremely acidic mixture of hydrogen chloride (HCl) and water. It is a liquid that is colorless, corrosive, and has a strong odor. It is frequently used in industrial and laboratory settings for tasks like metal cleaning, pickling, and pH control.

Ag+, Hg22+, and Pb2+ ions would precipitate from the mixture with the addition of HCl because they produce insoluble chlorides. Hg22+, Pb2+, and Ag+ all produce a white precipitate of AgCl, a yellow precipitation of Hg2Cl2, and a white precipitate of PbCl2. Due to the fact that they either do not create chlorides or their chlorides are soluble in water, the other ions in the combination would not precipitate with the addition of HCl.

To know more about HCl, visit:

https://brainly.com/question/28520444

#SPJ1

If the mass of the solid increases or decreases, then the volume will increase or decrease

Answers

We can say that the volume of the object is directly proportional to its mass. As the volume increases the mass of the object increases in direct proportion.

A liquid has a PH of1 what type of liquid is it?​

Answers

Answer:

A liquid with a pH of 1 is a very acidic liquid. It has a high concentration of hydrogen ions (H+) and a low concentration of hydroxide ions (OH-). Examples of such liquids include hydrochloric acid (HCl) and battery acid. It is important to handle such liquids with caution as they can be corrosive and harmful to human health.

The tabulated data show the concentration of AB versus time for this reaction: AB (g) → A(g) + B(g) Time (s) [AB] (M) 0 0.950 50 0.459 100 0.302 150 0.225 200 0.180 250 0.149300 0.128 350 0.112 400 0.0994 450 0.0894 500 0.0812Determine the order of the reaction and the value of the rate constant. predict the concentration of AB at 25 s

Answers

The given reaction is a second order reaction with the rate constant, k = 2.25 × 10⁻².

Since the concentration doesn't change uniformly with respect to time, hence the reaction cannot be zero order,

A(o) = [A(t)] + kt

Now, if we check the half-life is not coming in constant interval time limit, hence the reaction cannot be first order,

In{A(o)/A(t)} = kt  [Since for the first order reaction, the half life is independent of concentration]

Let us assume that the reaction is second order

1/[AB(T)] = 1/[AB(o)] + kt

1/0.459 = 1/0.950+ k(50)

k = 2.25 × 10⁻²

Taking another sample point to check if it is second order

1/0.302 = 1/0.950 + k(100)

k = 2.25 × 10⁻²

So, the value is constant, hence the reaction is second order

The value of rate constant will be 2.25 × 10⁻²  with the units M^(-1) s^(-1)

Learn more about order of the reaction from the link given below.

https://brainly.com/question/13467963

#SPJ4

Please Help
Inorganic Chemistry

Answers

1) The equilibrium constant is K< 10^-3

2) The reaction makes more lime at higher temperatures.

3) The equilibrium lies to the far left

4) The equilibrium lies to the far right

What is the equilibrium constant?

The equilibrium constant, also known as the reaction quotient, is a value that describes the relative concentrations of reactants and products in a chemical reaction at equilibrium. It is denoted by the symbol "Kc" and is defined as the ratio of the product of the concentrations of products raised to their stoichiometric coefficients to the product of the concentrations of reactants raised to their stoichiometric coefficients.

In mathematical terms, the equilibrium constant can be expressed as:

Kc = [C]^c [D]^d / [A]^a [B]^b

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

Alcoholic beverages are a mixture of water, ethanol, and natural flavoring. Describe why placing an alcoholic beverage in a freezer will not result in a solid, frozen product. (For context, we just finished talking about colligative properties and freezing point depression. :))

Answers

Placing an alcoholic beverage in a freezer will not result in a solid, frozen product because the freezing point of ethanol is very low.

Alcoholic beverages are defined as any fermented liquor, such as wine, beer, or distilled spirits, that contains ethyl alcohol, or ethanol (CH₃CH₂OH), as an intoxicating agent.

When we place alcohol in a freezer it often does not get frozen. This happens because we can't get it cold enough. Generally the freezing point of ethanol (the main component of alcohol) is -114 C or (-173 F). And our home freezer probably doesn't go below -20 F at its best.

Learn more about ethanol from the link given below.

https://brainly.com/question/28487809

#SPJ4

A covalent bond between two atoms is___
A. Formed when each atom shares one of its inner-orbit electrons with the other atom
B. Formed when each atom shares one of its outer-orbit electrons with the other atom
C. The strongest of the chemical bonds
D. Formed when each atom shares one of its inner-orbit electrons with the other atom and the strongest of the chemical bonds
E. Formed when each atom shares one of its outer-orbit electrons with the other atom and the strongest of the chemical bonds

Answers

Option (B) Formed when each atom shares one of its outer-orbit electrons with the other atom.

In a covalent bond, two atoms share a pair of electrons to complete their outermost (valence) electron shell. This sharing of electrons results in a stable electronic configuration for both atoms. Covalent bonds can be polar or nonpolar, depending on the electronegativity difference between the atoms. They are generally weaker than ionic bonds, but stronger than intermolecular forces. Option (B) Formed when each atom shares one of its outer-orbit electrons with the other atom is the correct answer for this question. This sharing of electrons results in a stable electronic configuration for both atoms.

Learn more about covalent bond :

https://brainly.com/question/10777799

#SPJ4

Which of the following statements is FALSE?

The enthalpy of sublimation is a combination of the enthalpies of vaporization and fusion


A compound with stronger intermolecular forces will have a higher boiling point


When a substance melts, some - but not all - of the intermolecular forces are disrupted


When a substance evaporates, a small fraction of the intermolecular forces are disrupted


The enthalpy of vaporization for a compound is greater than the enthalpy of fusion

Answers

The statement which is false is option 4, when a substance evaporates, a major fraction of the intermolecular forces are disrupted. Because, evaporation needs higher energy.

What is intermolecular force?

Intermolecular forces are the forces of attraction that held the molecules of a compound together. There are various types of intermolecular forces, such as hydrogen bonding, dipole - dipole forces, dispersion forces etc.

To melt or boil a compound, energy have to absorbed by the molecules to weaken the intermolecular forces. The enthalpy change of a phase change is the change in heat absorbed or released during the phase transition.

All the statements are correct, except the fourth one which says evaporation leads to disruption of small fraction of intermolecular forces. But in fact, evaporation of a compound, affect the entire intermolecular forces in the compound.

Find more on intermolecular forces:

https://brainly.com/question/13479228

#SPJ1

Part A Identity the reactants and products in this chemical equation Drag the appropriate labels to their respective targets. Reset Help reactant 4 NH3(g) + 5 O2(g) 4 NO(g) + 6 H2O(8) product

Answers

In the reaction: 4 NH₃ + 5 O₂ → 4 NO + 6 H₂O, the reactants are NH₃ and O₂ and the products are NO and H₂O.

The balanced chemical reaction is given as,

4 NH₃ + 5 O₂ → 4 NO + 6 H₂O

The substance present in the left of the arrow in a chemical equation are called reactants. Basically, a reactant is a substance that is present at the start of a chemical reaction. The substance(s) present in the right of the arrow are called products. Basically, a product is defined as a substance that is present at the end of a chemical reaction.

Learn more about chemical reaction from the link given below.

https://brainly.com/question/29039149

#SPJ4

Which of these would be considered a basic nucleophile for reaction with an epoxide? (Select all that apply) O HBr O H20, H2SO4 O LiAlH4 O RMgBr O HCN D O CH3ONa, CH3OH O NaOH, H20O HCI O CH3OH, H2SO4 O KCN, DMF O CH3CC- (alkynyl anion)

Answers

The following nucleophiles would be considered basic for reaction with an epoxide: NaOH, H2O, CH3ONa, CH3OH, LiAlH4, RMgBr and CH3CC- (alkynyl anion).

Which are more reactive- acidic or basic nucleophiles?

Basic nucleophiles are typically more reactive towards epoxides than acidic nucleophiles due to their electron-rich nature, which allows them to attack the highly electrophilic carbon centre of the epoxide ring. Acidic nucleophiles are species that can donate electrons to form a new bond with an electron-deficient center, such as a carbocation or an electrophilic carbon atom.

What do these basic nucleophiles do?

These nucleophiles can attack the carbon centre of the epoxide and open the ring to form a new alkoxide or alkyne product, depending on the specific conditions and reagents used.

To learn more about nucleophiles, visit here:

https://brainly.com/question/28325919

#SPJ1

5. Perform the following operations. Express each answer in scientific notation.

a. (1.54 x 10-2 g) + (2.86 x 10 -¹ g)

b. (7.023 x 109 g)-(6.62 x 10 Ig)

c. (8.99 × 10 -4 m) x (3.57 x 104 m)

d.2.17 × 10 -³ g /5.002 x 10 4 mL

Answers

The results of the given operations expressed in scientific notation are:

a. 3.01 * 10⁻¹ g

b. 6.957 x 10⁹ g

c. 3.21 * 10¹ m

d. 4.338 * 10⁻⁸ g/mL

What are the results of the following operations expressed in scientific notation?

The results of the following operations expressed in scientific notation are as follows:

a. (1.54 x 10⁻² g) + (2.86 x 10⁻¹ g)

= 0.154 x 10⁻¹ g + 2.86 x 10⁻¹ g

= 3.01 * 10⁻¹ g

b. (7.023 x 10⁹ g) - (6.62 x 10⁷g)

= 7.023 x 10⁹ g - 0.0662 x 10⁹ g

= 6.957 x 10⁹ g

c. (8.99 × 10⁻⁴ m) x (3.57 x 10⁴ m)

= 3.21 * 10¹ m

d. 2.17 × 10⁻³ g / 5.002 x 10⁴ mL

= 4.338 * 10⁻⁸ g/mL

Learn more about scientific notation at: https://brainly.com/question/27862246

#SPJ1

Stainless steel, type 304 having a density of 7.86 g/cm^3 has been used in some reactors. The nominal composition by weight of this material is as follows: carbon, 0.08%, chromium, 19%, nickel, 10%, iron, the remainder. Calculate the macroscopic absorption cross-section of SS-304 for 0.0253 eV neutrons assuming the following absorption cross sections: C, 0.0034 b; Cr, 3.1 b; Ni, 4.43 b; Fe, 2.55 b. On average, how far will a neutron travel in this material before being absorbed

Answers

The macroscopic absorption cross-section of SS-304 is 5.34*10^-2 cm^-1 and a neutron will travel 18.7 cm in SS-304 before being absorbed.

The macroscopic absorption cross-section of SS-304 can be calculated using the equation:

Σa = Nσa

Where N is the number density of the material and σa is the microscopic absorption cross-section.

First, we need to calculate the number density of each element in SS-304:

N₍c₎ = (0.08/100) * (7.86 g/cm^3) / (12.011 g/mol) * (6.022*10^23 atoms/mol) = 1.57*10^21 atoms/cm^3

N₍cr₎ = (19/100) * (7.86 g/cm^3) / (51.996 g/mol) * (6.022*10^23 atoms/mol) = 1.44*10^22 atoms/cm^3

N₍ni₎ = (10/100) * (7.86 g/cm^3) / (58.693 g/mol) * (6.022*10^23 atoms/mol) = 8.08*10^21 atoms/cm^3

N₍fe₎ = (71.92/100) * (7.86 g/cm^3) / (55.845 g/mol) * (6.022*10^23 atoms/mol) = 4.88*10^22 atoms/cm^3

Next, we can plug in the values for the number density and the absorption cross-sections into the equation:

Σa = (1.57*10^21 atoms/cm^3) * (0.0034 b) + (1.44*10^22 atoms/cm^3) * (3.1 b) + (8.08*10^21 atoms/cm^3) * (4.43 b) + (4.88*10^22 atoms/cm^3) * (2.55 b)

Σa = 5.34*10^-2 cm^-1

To find the average distance a neutron will travel in this material before being absorbed, we can use the equation:

l = 1/Σa

l = 1/(5.34*10^-2 cm^-1)

l = 18.7 cm

Therefore, on average, a neutron will travel 18.7 cm in SS-304 before being absorbed.

To know more about macroscopic absorption, refer here:

https://brainly.com/question/29483739#

#SPJ11

michael is being discharged home with his parents. the parents are concerned about recurrent infection with rsv and ask what can be done to lessen the chance of a reinfection.

Answers

By limiting contact and doing routine sanitization, RSV infection can be avoided.

What is RSV infection?

Respiratory syncytial virus, also called human respiratory syncytial virus and human orthopneumovirus, is a common and contagious virus that causes infections of the respiratory system. It is a negative-sense RNA, single-stranded virus. Although the majority of people recover within a week or two, RSV can be devastating, especially for young children and the elderly. RSV is the most common cause of pneumonia (lung infection) and bronchiolitis (inflammation of the small airways of the lung) in infants under one in the United States.

To learn more about  here Infection, click the link below

brainly.com/question/29850356

#SPJ4

Choosing the best term in science writing means choosing the term with (I)____ It is better to (II) ___ the chosen term rather than sacrifice (III)___Some of the best terms are long and (IV)___be abbreviated.Choices IO the most visual interpretationO the largest number of syllablesO the most precisely correct definitionChoices IIO repeatO VaryO ignoreChoices IIIO short phrasesO correct meaningO vivid imageryChoices IVO can alwaysO can appropriatelyO can never

Answers

Choosing the appropriate phrase for a scientific essay is selecting one that Choosing the preferred course is preferable to making a sacrifice. The best phrases can sometimes be shortened despite their length.

What is meant by visual interpretation?Analyzing satellite and aerial photos visually is called visual interpretation. Digital interpretation is the process of performing interpretation with the use of computer software.Over the course of more than 150 years, the fundamentals of picture interpretation have been developed scientifically. The most fundamental are the factors that affect how we understand images: site/situation/association, height/depth, position, size, shape, shadow, tone/color, texture, and pattern.To interpret what is on the ground, many image attributes, like object features and context, can be used (e.g., land cover and land use). Images from various times allow us to track changes to the Earth's surface and examine them.

To learn more about visual interpretation, refer to:

https://brainly.com/question/26385694

#SPJ4

calculate the ph of 500 ml of water to which 15 ml of 1.0 m koh has been added. give your answer to 1 decimal point.

Answers

The pH of 500 ml of water to which 15 ml of 1.0 M KOH has been added is 12.4.

The volume of the water = 500 mL

The volume of the KOH = 15 mL

The total volume = 500 + 15

                            = 515 mL

                           = 0.515 L

The moles of the KOH = molarity × volume in L

The moles of the KOH = 1 × 0.015

                                      = 0.015 mol

The molarity = 0.015 / 0.515

Molarity = 0.029 M

The KOH dissociates is completely, the added [OH] is equal to the [KOH]

pOH = - log ( 0.029 + 10⁻⁷ )

The Hydroxide ion concentration in the water is  1.0 x 10-7M,  is ignored because it is much smaller .

pOH = - log (0.029)

pOH = 1.52

pH = 14 - pOH

pH = 14 - 1.52

pH = 12.4

To learn more about pH here

https://brainly.com/question/29461558

#SPJ4

Complete the electron-pushing mechanism for the reaction by drawing the necessary organic structures and curved arrows for each step. Make sure to include all nonbonding electron pairs.Consider the following reaction: Complete the electron-pushing mechanism for the reaction by drawing the necessary organic structures and curved arrows for each step. Make sure to include all nonbonding electron pairs. Step 1: treatment with NaBH 4 Add curved arrows for the first step. Treat Na + as a spectator ion. Step 2: treatment with D 2 O Add curved arrows for the second step. Do not show Na + counter ion. Final products Draw the products of the last step (hint: one organic and one inorganic species), including all nonbonding electron pairs. Do not show Na + counter ion.

Answers

The given reaction involves the reduction of a ketone using NaBH4 and subsequent exchange of a proton with deuterium in D2O.

In the first step, NaBH4 donates a hydride ion (H-) to the carbonyl carbon of the ketone, forming an alkoxide intermediate. The hydride ion acts as a nucleophile, attacking the electrophilic carbon of the carbonyl group. In the second step, the alkoxide intermediate is protonated by D2O, leading to the formation of the corresponding alcohol and release of NaOD. The proton exchange with D2O results in the replacement of a proton by a deuterium atom. The final products are the deuterated alcohol and NaOD. The curved arrows in the mechanism represent the flow of electrons, and it is essential to show all the nonbonding electron pairs involved in each step. The given reaction involves the reduction of a ketone using NaBH4 and subsequent exchange of a proton with deuterium in D2O.

Learn more about ketone :

https://brainly.com/question/4439718

#SPJ4

Observe the diagram of the water cycle. Fill in the state changes with each step. Then, in the space provided, explain the change of state that occurs as water moves from one part of the water cycle to another.

Answers

According to the forces of attraction , as water passes on in water cycle its state changes from liquid to vapor and solid in form of ice and then back to liquid.

What are forces of attraction?

Forces of attraction  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

The physical properties such as melting point, boiling point, density  are all dependent on forces of attraction which exists in the substances.

Learn more about forces of attraction,here:

https://brainly.com/question/23841038

#SPJ1

Other Questions
what is vyvanse side effects in females What are some quotes from Frederick Douglass about freedom? if chinese companies like huawei plan to expand to the united states, they will need to adjust to americans higher tolerance for unpredictability. based on what you know about the globe project, what cultural dimension would this be?a. future orientationb. in-group collectivismc. humane orientationd. uncertaintly avoidancee. assertiveness Someone pls help, I need this really soon. The story is an excerpt from the eyes have it just in case you need it and if you can find it on the internet, Ill post it. 1 Suppose that you try to lift an object by exerting an upward force of 5 Newtons on it. If gravity exerts a force of 10 Newtons downward on the object, what is the total force on the object? a. 15 Newtons upwardb. 10 Newtons downwardc. 5 Newtons upwardd. 15 Newtons downwarde. 5 Newtons downward under a price floor, such as minimum wage for minor league baseball players which is true?A:there will be excess demandB:there will be excess supplyC:supply and demand are in equallbrium with a price floorD:quantity of players immediately goes to zero rules of precedence refers to the set of rules governing the order in which expressions involving multiple operators and operands are evaluated. Malcolm trains on his kayak every weekend. He paddles upstream (against current) for 3 hours and then returns downstream (with current) in 2hrs 6 minutes. If the river flows at 3km/ h, find:* The paddling speed in still water* The distance he paddles upstream. why does time = 2h/g?h = heightg = gravitational acceleration A radio station broadcasts a signal over an area with a 45-mile radius. What is the area of the region that receives the radio signal to the nearest tenth? What are the characteristics of an independent clause? Select three options.It contains a subject and a verb.It expresses a complete thought.It begins with a relative pronoun.It can stand alone as a complete sentence.It cannot stand alone as a complete sentence. Explain how the steps Ansel Adams took for each photograph reflected his philosophy that there are no shortcuts to excellence. Use evidence from excerpt 1 from Ansel Adams to support your answer. What is a nursing diagnosis for ineffective coping? Based on what you learned about telescopes, select all of the correct statements from the following list.A. There would be some chromatic aberration.B. Recently built modern telescopes are reflectors.C. -Most types of electromagnetic waves are not visible to ground-based telescopes.- The Compton, Chandra and Spitzer telescopes are all examples of space telescopes.D. Find the location of cool hydrogen gas and see through dust clouds. norwegian city located on an island crossword clue is called? peter schweizer secret empires the daily beast reported that the book contained 14 examples of plagiarism.T/F CFlagpole a and flagpole c are both casting a shadow that ends at point s.The distance (x) between the flagpoles is 12 ft.The distance (y) from flagpole c to point s is 10 ft.The height of flagpole a is 13.2 ft.What is the height of flagpole c?Show all your work. What is 20610 cpt code ? (Table: Output in the United States and China) #94Using the data in the table, what will happen to the U.S. labor force after trade occurs with China?-U.S. labor will move from apparel to agriculture, where its marginal productivity is higher.-U.S. jobs in apparel will be exported to China, and wheat exports will create additional jobs in agriculture, and the value of output produced by U.S. labor will increase.-The value of output produced by U.S. labor will increase.-U.S. labor will move from apparel to agriculture, where its marginal productivity is higher. U.S. jobs in apparel will be exported to China, and wheat exports will create additional jobs in agriculture, and the value of output produced by U.S. labor will increase. When giving a speech with a digital presentation, you shouldSelect one:a. read from your presentation verbatim.b. avoid eye contact with the audience.c. make the aid has flashy as possible to impress your listeners.d. remember that your primary mission is to communicate with your words.