Please help me! Some people have proposed a new way to build houses in areas that are likely to experience tsunamis. In this design, a house wouldn’t have solid walls on all four sides. Instead, some of the wall areas would be replaced by substances that water can travel through quickly, as shown in the diagram. How would this design help a house survive a tsunami? What drawbacks might there be to this design?

In Building, there are a host of protective devices that are installed to protect lives and properties, one of them is the Lightning Conductor that  a metal rod mounted on a structure and intended to protect the structure from a lightning strike. It works on the principle of induction

The lightning conductor works on the principle of induction:

Most Lightening conductors are made from copper materials.

Learn about Lightning Conductor:

https://brainly.com/question/2824044

The region a represents the distance of the electron from the nucleus.

According to the wave mechanical model of the atom, the probability of finding an electron within a given volume element (representing the atom) is the square of the wave function psi.

Since a is the region in space where there is the greatest probability of finding the electron in the atom, it follows that distance of the electron form the atom is always a.

Learn more about the wave mechanical model: https://brainly.com/question/1382157

Answer:

Explanation:

Not enough information.

IF we ASSUME she wants the car to be at LAUNCH LEVEL after 1 second of flight.

THEN

The highest point will have zero vertical velocity and will have taken ½ second to get there. This means that the initial vertical velocity was

v = gt

vy₀ = 9.8(0.5)

vy₀ = 4.9 m/s

vsinθ = vy₀

v = vy₀/sinθ

v = 4.9/sin32

v = 9.2466...

v = 9.2 m/s

Answer:

Single Displacement Reaction

Explanation:

Here, only one element is getting replaced during the reaction, that is, silver gets replaced by copper, hence, single displacement reaction.

Hope it helps :)

Answer:

no idea thanks you veryuch

Answer:

a. petrification

Explanation:

tar seeps = natural trade that, because of its close proximity to the ground surface, seeps from the cracks in the Earth or between rocks forming pits or pools (tar pits)

amber = fossilized resin produced by extinct coniferous trees, typically yellow in color

mummification = a process in which the skin and flesh of a corpse can be preserved by embalming and drying

Explanation:

Downstream: you just sum the magnitude of the velocity vectors:

3km/h + 4km/h = 7km/h

Upstream: difference of the magnitudes of the velocity vectors, in absolute value:

|3km/h - 4km/h| = 1km/h

If initial speed was v, Kinetic energy was K = 1/2mv^2

When speed will be 4v, KE will be:

= 1/2 m (4v)^2

=1/2m 16 v^2

=16K

Now kinetic energy will become 16 times of initial Kinetic Energy

Answer:

About 3.47kg

Explanation:

Recall that weight is equal to mass times acceleration.

In this case, our acceleration is due to gravity which on earth is about 9.8m/s/s

So we have 34N=9.8 *mass, divide both sides by 9.8 we get mass is equal to about 3.47kg.

Mass the air mattress support before sinking will be M = 97.2 kg

Given that

mass of mattress m=2.8 kg

Length = 2.00 m  

width =0.5 m  

The mattress can support a total weight that is equal to the weight of water that the air mattress displaces.

The volume of the air mattress will be equal to

[tex]V= (2\times 0.5\times 0.1)[/tex]

[tex]V= 0.1 m^{3}[/tex]

This volume is equal to the maximum amount of water that the mattress can displace in the water before it begins sinking.

We know the density of water is 1000 kg / m²

We can calculate the weight of the maximum amount of water that mattress will displace

[tex]V\times density of water\times g=0.1\times 1000\times 9.81=981N[/tex]

Let M represent the mass that the mattress is supporting.

The total weight of the mattress and the supported mass is:

[tex](2.8+M)\times9.81[/tex]

Setting this weight equal to the weight of the water displaced gives:

[tex](2.8+M)\times9.81=981[/tex]

[tex]2.8+M=100[/tex]

m = 97.2 kg

Hence Mass the air mattress support before sinking will be M = 97.2 kg

To know more about Buoyancy follow

https://brainly.com/question/117714

Yes, it is possible to determine the final speed of the rollercoaster if the initial speed and the height to be reached are known.

According the principle of conservation of energy, the total kinetic energy is equal to the total potential energy.

[tex]P.E _i + K.E_i = P.E_f + K.E_f \\\\mgh_i + \frac{1}{2} mv_i^2 = mgh_f + \frac{1}{2} mv_f^2\\\\gh_i + \frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\g(0) + \frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\\frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\v_i^2 = 2gh_f + v_f^2\\\\v_i^2 - 2gh_f = v_f^2\\\\v_f = \sqrt{v_i^2 - 2gh_f}[/tex]

where;

Thus, it is possible to determine the final speed of the rollercoaster if the initial speed and the height to be reached are known.

Learn more about conservation of energy here: https://brainly.com/question/166559

Four regions of the electromagnetic spectrum that astronomers use when observing objects in the space are the following enumerated answers.

1. First is Ultraviolet

2. Next is Infrared

3. Then the radio

4. Lastly the Visible lights.

These are the answers to the problem.

Answer:

Forces can be divided into primarily into two types of forces:

Explanation:

Answer:

I think the answer is goat

Answer:

FA = 2FB

Force on spring A is twice the Force on spring B

Explanation:

F = kx

FB = (kB)x

FA = (kA)x

FA= (2kB)x

FA = 2(kB)x

FA = 2FB

The force [tex]F_A[/tex] needed to stretch spring A is going to be twice as much as the force [tex]F_B[/tex] needed to stretch spring B.

Explanation:

We know that the spring constants are related as

[tex]k_A = 2k_B[/tex]

The force [tex]F_A[/tex] needed to stretch spring A is given by

[tex]F_A = -k_Ax[/tex]

Also, the force [tex]F_B[/tex] needed to stretch spring is

[tex]F_B = -k_Bx[/tex]

Taking the ratio of the forces, we get

[tex]\dfrac{F_A}{F_B} = \dfrac{-k_Ax}{-k_Bx} = \dfrac{k_A}{k_B}[/tex]

Since [tex]k_A = 2k_B,[/tex] the equation above becomes

[tex]\dfrac{F_A}{F_B} = \dfrac{2k_B}{k_B} = 2[/tex]

or

[tex]F_A = 2F_B[/tex]

This shows that since the spring constant of spring A is twice as large as that of spring B, the force needed is going to be twice as large.

Answer: push force gravity tension and reverse force

Explanation: sense they are pushing the box there is a push force gravity because this is likely on earth tension because it is the reverse of gravity and the reverse force because you have to have the reverse of push

Answer:

B

Explanation:

Simply take all forces pointing to the right of the box as positive and all of the forces pointing to the left of the box as negative and add all values.

ΣF = 7 + 18 + (-20) = 5N to the right

Answer:

you forgot to attach the image

Answer:

Speed of light =m/s

wavelength = m

frequency = ?

we have

Speed = frequency × wavelength

[tex]3* 10^8[/tex] = frequency × [tex]5 * 10^{-7}[/tex]

 Frequency = [tex]\frac{3*10^8}{5*10^{-7}}=6*10^{14}[/tex]hz

Taking into account the definition of wavelength, frecuency and propagation speed, the frequency of light waves with wavelength of 5×10⁻⁷ m is 6×10¹⁴ Hz.

First of all, wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).

On the other side, frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

Finally, the propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave disturbance propagates along its displacement.

The propagation speed relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:

v = f× λ

All electromagnetic waves propagate in a vacuum at a constant speed of 3×10⁸ m/s, the speed of light.

In this case, you know:

Replacing in the definition of propagation speed:

3×10⁸ m/s = f× 5×10⁻⁷ m

Solving:

3×10⁸ m/s ÷ 5×10⁻⁷ m= f

f= 6×10¹⁴ Hz

In summary, the frequency of light waves with wavelength of 5×10⁻⁷ m is 6×10¹⁴ Hz.

Learn more about wavelength, frecuency and propagation speed:

brainly.com/question/2232652?referrer=searchResults

brainly.com/question/7321084?referrer=searchResults

brainly.com/question/14946166?referrer=searchResults

The conventions for the current allow to find the result for which is the direction of the current the is circuit is:

Current is the movement of electrons in a circuit per unit time.

In an electrical circuit the electrons that have a negative charge leave the negative electrode towards the positive electrode, by convention the current goes in the opposite direction from the positive electrode towards the negative electrode.

When analyzing the given circuit, the current leaves the positive pole at the top of the battery and moves through the blue wire, reaches the light bulb and moves the red wire and reaches the negative pole of the battery.

In conclusion using the conventions for the current we can find the result for which is the direction of the current the is circuit is:

Learn more about electric current here: brainly.com/question/996480

Answer:

2.5m/s

Explanation:

m1=55kg

m2=25kg

Ben's velocity before collision=0m/s

Junior's velocity before collision= 8m/s

P1=m1v1+m2v2

P1=55kg(0m/s)+25kg(8m/s)

P1=200kg(m/s)

Know that the momentum before the collision = momentum after the collision

P2=(55kg+25kg)V

200kg(m/s)=(75kg)V

200kg(m/s)/75kg=V

V=2.5m/s.

It makes sense bc after they collide, their speed would slow down, and it wouldn't make sense if the momentum would be greater or less after they collide.

Answer:

c. Impulse

Explanation:

The temperature of the diatomic gas is 300.5 K and the pressure is 5.33 atm.

The given parameters;

The mean velocity of the gas molecules is calculated as follows;

[tex]\tau = \frac{\lambda _{rms}}{V_{rms}} \\\\V_{rms} = \frac{\lambda _{rms}}{\tau} \\\\V_{rms} = \frac{4.32 \times 10^{-8} }{3 \times 10^{-10}} \\\\V_{rms} = 144 \ m/s[/tex]

The temperature  of the gas molecules is calculated as follows;

[tex]V_{rms} = \sqrt{\frac{3kT}{M} } \\\\V_{rms}^2 = \frac{3kT}{M} \\\\T = \frac{V_{rms} ^2 M}{3k}[/tex]

where;

[tex]T = \frac{V_{rms} ^2 M}{3k} \\\\T = \frac{(144)^2 \times (6.0 \times 10^{-25})}{3 \times 1.38 \times 10^{-23}} \\\\T = 300.5 \ K[/tex]

The number of gas molecules per unit volume is calculated as follows;

[tex]\lambda = \frac{1}{4\pi \sqrt{2} \ r^2 n} \\\\n = \frac{1}{\lambda 4\pi \sqrt{2} \ r^2} \\\\n = \frac{1}{(4.32 \times 10^{-8}) \times 4 \pi \times \sqrt{2} \ \times (1\times 10^{-10})^2} \\\\n = 1.303 \times 10^{26} \ molcules/m^3[/tex]

The pressure of the gas molecule is calculated as follows;

[tex]n = \frac{P}{kT} \\\\P = nkT\\\\P = (1.303 \times 10^{26} ) \times (1.38 \times 10^{-23}) \times (300.5)\\\\P = 540,341.07 \ Pa\\\\P = 5.33 \ atm[/tex]

Thus, the temperature of the diatomic gas is 300.5 K and the pressure is 5.33 atm.

Learn more about mean free path of gases here: https://brainly.com/question/4279093

Answer:

Iron(III) nitrate

Explanation:

Answer:

Explanation:

Terminal speed is

2 m/s²(3 s) = 6 m/s

30 m / 6 m/s = 5 s

total sink time is

3 + 5 = 8 s

The total time taken by the rock to sink would be 8 seconds

The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object.

The acceleration of the rock for the first three seconds = 2 meters/second²

The time taken to reach the terminal velocity = 3 seconds

terminal velocity = 2 ×3

                           = 6 meters/second²

The time for which the rock sink at terminal velocity = 30 /6

                                                                                       = 5 seconds

total time is taken by the rock to sink = 3 + 5

                                                           =8 seconds

Learn more about Velocity from here, refer to the link;

brainly.com/question/18084516

#SPJ2

(a) The period of the oscillation is 0.8 s.

(b) The frequency of the oscillation is 1.25 Hz.

(c) The angular frequency of the oscillation is 7.885 rad/s.

(d) The amplitude of the oscillation is 3 cm.

(e) The force constant of the spring is 148.1 N/m.

The given parameters:

From the given graph, we can determine the missing parameters.

The amplitude of the wave is the maximum displacement, A = 3 cm

The period of the oscillation is the time taken to make one complete cycle.

T = 0.8 s

The frequency of the oscillation is calculated as follows;

[tex]f = \frac{1}{T} \\\\f = \frac{1 }{0.8} \\\\f = 1.25 \ Hz[/tex]

The angular frequency of the oscillation is calculated as follows;

[tex]\omega = 2\pi f\\\\\omega = 2\pi \times 1.25\\\\\omega = 7.855 \ rad/s[/tex]

The force constant of the spring is calculated as follows;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega ^2 = \frac{k}{m} \\\\ k = \omega ^2 m\\\\k = (7.855)^2 \times 2.4\\\\k = 148.1 \ N/m[/tex]

Learn more about general wave equation here: https://brainly.com/question/25699025

Answer:

The altitude of the satellite above the surface of the Earth is 1,528.48 km.

F=rmv2=R2GmMrv2=R2GMr=GMv2R2r=(6.67259×10−11)×(5.98×1024)(6900)2×(6,370,000)2r=4,841,516.6 mr=4,841.52 km

Answer:

left to right

Explanation:

give me brain pls

Answer:

of the moon to .......