Please help me find the final answer

Please Help Me Find The Final Answer

Answers

Answer 1

Answer:

5. The mass of Na₂CO₃, that will produce 5 g of CO₂ is approximately 12.04 grams of Na₂CO₃

6. The mass of nitrogen gas (N₂) that will react completely with 150 g of hydrogen (H₂) in the production of NH₃ is 693.[tex]\overline{3168}[/tex] grams of N₂

Explanation:

5. The given equation for the formation of carbon dioxide (CO₂) from sodium bicarbonate (Na₂CO₃)  is presented as follows;

(Na₂CO₃) + 2HCl → 2NaCl + CO₂ + H₂O

One mole (105.99 g) of Na₂CO₃ produces 1 mole (44.01 g) of CO₂

The mass, 'x' g of Na₂CO₃, that will produce 5 g of CO₂ is given by the law of definite proportions as follows;

[tex]\dfrac{x \ g}{105.99 \ g} = \dfrac{5 \ g}{44.01 \ g}[/tex]

[tex]\therefore {x \ g} = \dfrac{5 \ g}{44.01 \ g} \times 105.99 \ g \approx 12.04 \ g[/tex]

The mass of Na₂CO₃, that will produce 5 g of CO₂, x ≈ 12.04 g

6. The chemical equation for the reaction is presented as follows;

N₂ + 3H₂ → 2NH₃

Therefore, one mole (28.01 g) of nitrogen gas, (N₂), reacts with three moles (3 × 2.02 g) of hydrogen gas (H₂) to produce 2 moles of ammonia (NH₃)

The mass 'x' grams of nitrogen gas (N₂) that will react completely with150 g of hydrogen (H₂) in the production of NH₃ is given as follows;

[tex]\dfrac{x \ g}{28 .01 \ g} = \dfrac{150 \ g}{3 \times 2.02 \ g} = \dfrac{150 \ g}{6.06 \ g}[/tex]

[tex]\therefore \ x \ g= \dfrac{150 \ g}{6.06 \ g} \times 28.01 \ g = 693.\overline {3168} \ g[/tex]

The mass of nitrogen gas (N₂) that will react completely with 150 g of hydrogen (H₂) in the production of NH₃, x = 693.[tex]\overline{3168}[/tex] grams


Related Questions

list 5 things which we can make using each of the following materials​

Answers

Answer:

Glass

1.microscopes

2.mirrors

3.glass shelves

4.wrist watch glass

5.magnifying glass

Metal

1.keys

2.automobile body parts

3.coins

4.window frames

5.screws and nails

Plastic

1.bottles

2.boxes

3.balls

4.carry bags

5.buckets and mugs

Wood

1.chairs

2.tables

3.shoe stand

4.dressing table

5.shelves

As the moon orbits the ______________, its gravitational pull is______________ on the side of the earth closest to the ______________.This ______________ force pulls on the water facing the moon,creating a ______________. The moon also ______________ on the solidearth, causing the water on the far side of earth to ______________as well. These bulges in the water are the ______________.The areas in between the close and far side of the earth which are not in ______________ with the moon experience ______________.


pls help i give brainlyest

Answers

Answer:

Earth

Strongest

Moon

Gravitational

Tide

Pulls

Bulge

Waves

Proximity

Low Tide

If a star is 300 light years away from Earth, how long does it take light from that star to reach Earth?
A. 300 days
B. 300 hours
C. 300 years
D. 300 light years

Answers

It would take 300 light years to reach Earth

Question 5 of 5
When planning space exploration, scientists face many
challenges. One issue is the weight of the items being
transported. They can use the engineering design process
to help minimize the weight of materials on board a
spacecraft.
You have designed a prototype of a new, lighter material. What should be the
next step in your process?
A. Update your initial design for the new type of material.
B. Test to see
whether your material is strong and works well.
C. Figure out what problems people want to solve.
D. Brainstorm new ways to design materials.

Answers

Answer:B

Explanation: got it right on test

Test to see whether your material is strong and works well  should be the next step in your process. Therefore, the correct option is option B.

What is space exploration?

Space science and technology are used in space exploration to learn more about the universe. While astronomers use telescopes to explore the universe, both unmanned robotic space missions and human spaceflight also participate in the physical exploration of space.

When planning space exploration, scientists face many challenges. One issue is the weight of the items being transported. They can use the engineering design process to help minimize the weight of materials on board a spacecraft.  You have designed a prototype of a new, lighter material. Test to see whether your material is strong and works well  should be the next step in your process.

Therefore, the correct option is option B.

To know more about space exploration, here:

https://brainly.com/question/12271960

#SPJ5

A trait that is helpful to a species will become more common in that
species over time. This is called what.

A. genetic variation
B. transition
C. overproduction
D. selection

Answers

B is the right answer

I’ll really appreciate it if you help me out on these 2 questions.

Answers

Answer:

13. A

14. C

Explanation: i tried my best

What volume will 3.50 mol of ammonia gas occupy at conditions of standard temperature and pressure?

Answers

Answer:

Q:

What volume will 3.50 mol of Xe gas occupy at STP?

A:

78.4 L

Explanation:

The volume occupied by 3.5 moles of ammonia gas at standard temperature and pressure (STP) is 78.45 L

Data obtained from the question Number of mole (n) = 3.5 moles Pressure (P) = STP = 1 atm Temperature (T) = STP = 273 KGas constant (R) = 0.0821 atm.L/Kmol Volume (V) =?

How to determine the volume

The volume of the gas at standard temperature and pressure (STP) can be obtained by using the ideal gas equation as illustrated below:

PV = nRT

1 × V = 3.5 × 0.0821 × 273

V = 78.45 L

Learn more about ideal gas equation:

https://brainly.com/question/4147359

how would I solve this problem?

Answers

Answer:

D

Explanation:

The goal in this set up is to make sure all units cancel each other.

Since we need to go from grams to atoms, our final unit should be atoms.

Using method of elimination, let's see why other options are wrong.

A - Although 'g' is cancelled out, we are left with moles^2 / atoms

B - Although 'g' is cancelled out, we are left with moles^2 / atoms

C - Although 'mol' is cancelled out, we are left with g^2 / atoms

Can someone pls help me with this its due in 20 minutes.

Answers

Answer:

15. The velocity of a sound wave is affected by two properties of matter: the elastic properties and density.

16. The greater the density of a medium, the slower the speed of sound. This observation is analogous to the fact that the frequency of a simple harmonic motion is inversely proportional to m, the mass of the oscillating object.

17. Temp °C 0 m/s2 m/s

50 360.51 361.62

18. Molecules at higher temperatures have more energy, thus they can vibrate faster. Since the molecules vibrate faster, sound waves can travel more quickly. The speed of sound in room temperature air is 346 meters per second. ... The speed of sound is also affected by other factors such as humidity and air pressure.

classify matter as elements mixtures and compounds

Answers

Answer:

An element contains just one type of atom. A compound contains two or more different atoms joined together. A mixture contains two or more different substances that are only physically joined together, not chemically. A mixture can contain both elements and compounds.

Which of the following best explains how minerals get into streams?

A. Rainwater that is high in minerals from the atmosphere falls into the stream.
B. The stream absorbs minerals from the plants growing in and around its banks.
C. Rainwater dissolves minerals out of the rocks and soil along the stream during runoff.
D. When water evaporates from the ocean, it takes minerals with it and redeposits them as rainwater into the stream.
please help me

Answers

Answer:

C:Rainwater dissolves minerals out of the rocks and soil along the stream during runoff

the answer is C have a great rest of your day

1)Change the following temperatures to Kelvin: 100 C and -20 C
2)Change the following temperatures to Celsius: 273 K and 15 K

Answers

Answer:

373 K; 253 K

0°C ; -258°C

Explanation:

In order to change Temperatures to Absolute Value (Kelvin) you shoud do this sum:

T° in C  + 273 = T° in K

For question 1:

100°C + 273 = 373K

-20°C + 273 = 253K

For question 2:

T° K - 273 = T° C

273 K - 273 = 0°C

15 k + 273 = -258 °C

Answer:

-67.8

Explanation:

Find Jay's instantaneous speed at 35 minutes.

Find jays instantaneous speed at 35 minutes.

Answers

What do u mean by the question?

What is the charge on an atom after it gains two electrons during the formation of a bond?
One negative charge
One positive charge
Two negative charges
Two positive charges

Answers

Answer:

two negative charges is the answer of your question

(Help would be greatly appreciated) What is the molarity of a solution which contains 22.41 grams of NaCl in 50.0 mL of solution?
1. 0.488M
2. 7.67mol
3. 7.67M
4. 0.000767M

Answers

Answer:

7.67

Explanation:

According to molar concentration, the molarity of solution which contains 22.41 grams of NaCl in 50.0 ml of solution is 7.67 M.

What is molar concentration?

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substitution of values in the given formula gives, molarity= 22.41/58.44×1/0.05=7.67 M.

Thus, the  molarity of solution which contains 22.41 grams of NaCl in 50.0 ml of solution is 7.67 M.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

HELPP!!
in reaction 3Fe+2O2=Fe3O4 if I add 20g of Fe to my solution how many moles of Fe3O4 will produce???

Answers

Answer:

0.119 moles

Explanation:

molar mass of Fe = 55.845g

to find moles = mass/ molar mass

so moles of Fe = 20/55.845

= 0.358 moles

for the equation you are given

for every three Fe, it produces 1 Fe3O4 , meaning the ratio is 3:1

if you have 0.358 moles of Fe, that means the number of moles of Fe3O4  will equal to one third of that,

thus

moles of Fe3O4 = 1/3 x 0.358 = 0.119

how much heat is released as 5.00G of PB cool from 75.0° C to 25.0° C

Answers

Answer:

32.25 J

Explanation:

Heat, H = ?

Mass, m = 5g = 5 / 1000 = 0.005 Kg

Initial Temperature = 75.0° C

Final Temperature = 25.0° C

Temperature change, ΔT = Final - Initial = 50° C

Specific heat capacity of lead, C = 129 (J/kg°C)

The relationship between these quantities is given by the equation

H = mCΔT

H = 0.005 * 129 * 50

H = 32.25 J

What is the solution to the problem expressed to the correct number of significant figures?
7.21= ?
A. 1.688
OB.
1.69
O C.
1.7:
OD
1.70

Answers

Answer:

(102 900 ÷ 12) + (170 × 1.27) = 8800

Step 1. Evaluate the expressions inside the parentheses (PEMDAS)

102 900 ÷ 12 = 8575

170 × 1.27 = 215.9

In multiplication and division problems, your answer can have no more significant figures than the number with the fewest significant figures.

Thus, the underlined digits are not significant, but we keep them in our calculator to avoid roundoff error.

Step 2. Do the addition (PEMDAS).

  8575

+    215.9

= 8790.9

Everything that you add to an insignificant digit gives an insignificant digit as an answer.

Thus, the underlined digits are not significant.

We must drop them and round up the answer to 8800.

Explanation:

HELP PLEASE , ITS DUE BY 6 ❤️10. If temperature were increased at the same rate for all four substances, which substance
would turn into a gas first?

Answers

Answer:

Dependant

Explanation:

Depending on the kind of substance you have (since ur answer of what substances was vauge) you would want to look at the molecular structure of the substances.

Understanding intermolecular bonds are key here (research this)

For example, Bromine is found as Br2 and only exerts London dispersion forces as there is no difference in polarity. And because this force is weaker, it has a lower boiling point

Another example being something like Hydrochloric acid (HCl). This is where Hydrogen acts as the positive atom while chlorine is the negative atom. This creates a stronger force and thus, a higher boiling point than Br2

Finally, there is Something like H2O where the force in play is Hydrogen bonding as Nitrogen, Oxygen, Fluorine where the bonds are strongest due to the electronegativity is at the greatest difference between these and Hydrogen. and thus having a higher boiling point.

So depending on the substance's bond, that will help determine the boiling point. If they fall under the same group, go based on the greatest difference in electronegativity.

I don't know if this is what you're looking for but, hope this helps. :)

What results when equal but opposite charges are present in two regions of a polar molecule? A. dipole B. ionic bond C. Electron sea D. crystal lattice

Answers

Answer: A. dipole

Explanation:

Dipole can be defined as the separation of the equal and opposite charges present in the molecule via ionic bonding. The water molecule comprising of two molecules of hydrogen being positively charged and one molecule of oxygen being negatively charged are connected via ionic bonding thus water molecule is an example of dipole molecule. There is unequal distribution of the electrical density throughout the molecule.

The polar molecule results in a dipole when equal but opposite charges are present in two regions.

Dipole:  

Dipole arises when a molecule have opposite and equal charge in the ends.

For example - water molecule

In water molecule Oxygen is negatively charged and hydrogen have low electronegativity, this difference in electronegativities arise dipole in molecule.

Therefore, the polar molecule results in a dipole when equal but opposite charges are present in two regions.

To know more about Dipole,

https://brainly.com/question/18382778

Seawater is a good source of magnesium. Magnesium is dissolved in the seawater as Mg²⁺. SUGGEST a substance that could be used to precipitate magnesium out of the water. Write a BALANCED CHEMICAL EQUATION and IDENTIFY THE REACTION TYPE to support your thinking

Answers

Answer:

SO₄⁻² (aq)  +  Mg²⁺ (aq)  ⇄  MgSO₄ (s) ↓

Precipitation reaction

Explanation:

Mg²⁻ is one of the metals at group 2 in the Perodic Table. This group is called, the alkaline earth metals.

To make precipitate the Mg²⁺ we can use a salt of sulfate, either flouride or phosphate. Those are three salts that can precipitate this metal.

We use sodium as cathion so, first of all we dissociate them:

Na₂SO₄ (aq) →  2Na⁺  (aq)  +  SO₄⁻² (aq)

NaF (aq) →  Na⁺ (aq) +  F⁻ (aq)

Na₃PO₄ (aq) →  3Na⁺ (aq)  +  PO₄⁻³ (aq)

In all cases, the reaction is of the precipitation type and is conditioned by the Kps, the solubility product constant. Let's bond the anions with Mg²⁺.

SO₄⁻² (aq)  +  Mg²⁺ (aq)  ⇄  MgSO₄ (s) ↓    Kps

2F⁻ (aq)  +  Mg²⁺ (aq)  ⇄   MgF₂ (s) ↓      Kps

2PO₄⁻³ (aq)  +  3Mg²⁺ (aq)  ⇄  Mg₃PO₄ (s) ↓   Kps  

what is a food chain OR web, and what is it useful for?

Answers

Answer:

-

-

Food webs can be used to study bottom-up or top-down control of community structure.

Explanation:

Food chains are important because they show the intricate relationships in ecosystems. They can reveal how each organism depends on someone else for survival. Food chains also display what happens when a problem occurs and a producer or consumer is lost.

-

-

-

-

What is the molarity of a solution that contains 3.66 mol KCl in 7.98 L solution?

Answers

Answer:

.4586M

Explanation:

It's simple, just devide the mol value by the volume value. So 3.66mol/7.98L=.4586M

How do waves form?

Lesson 2.13

Question 4 options:

Ocean waves don't form


Ocean waves form as wind is absent.


Ocean waves form as wind moves across the surface, transferring its energy to the water.


Ocean waves form as salinity increases.

Answers

Answer:

It's the 4th one. waves are created by the wind

Answer:

C. Ocean waves form as wind moves across the surface, transferring its energy to the water.

Explanation:

hope this helps! c:

what type of galaxy is this

Answers

Explanation:

it is an spiral as it are rounded so

It is a spiral type of galaxy.

MORE THEN ONE ANSWER Factors affecting energy transfer

Lesson 2.14-2.15

Question 9 options:

Wind moving over a relatively flat water surface has less area to come in contact with the water, and this reduces energy transfer.


Larger waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.


Wind moving over a relatively flat water surface has GREATER area to come in contact with the water, and this INCREASES energy transfer.


SMALLER waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.

Answers

Answer:

1.) Wind moving over a relatively flat water surface has less area to come in contact with the water, and this reduces energy transfer.

2.) Larger waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.

Explanation:

I got it right on the test.

Wind moving over a relatively flat water surface has less area to come in contact with the water, and this reduces energy transfer and Larger waves have extra spaces and areas to trap air, increasing the transfer of the wind's energy to the water.

What is energy transfer?

When energy of any body travels from the one body to the another body, then transfer of energy takes place.

In the oceans, winds transfer their energy to the ocean or to the sea by the interaction with the surface water. When on the surface of ocean or sea up and down movement of water occurs then the interaction of that water with wind takes place and transfer of energy from wind to sea happen. More roughness or more height of the water on the surface of sea observed ten more transfer of energy from wind to sea occur.

Hence, option (1) & (2) is correct i.e. wind moving over a relatively flat water surface reduces energy transfer and Larger waves increasing the transfer of the wind's energy to the water.

To know more about energy transfer, visit the below link:

https://brainly.com/question/2667612

When magnesium reacts with sulfuric acid the products are magnesium sulfate and hydrogen. If there are 15 grams of magnesium at the start of the reaction, how much magnesium will be present in the magnesium sulfate

Answers

Answer: 15 grams of magnesium will be present in the magnesium sulfate

Explanation:

According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.

The balanced chemical reaction is:

[tex]Mg+H_2SO_4\rightarrow MgSO_4+H_2[/tex]

As the mass remains conserved at the end of the reaction, there will be 15 grams of Magnesium in magnesium sulphate.

Anyone help please more & you get extra points

Answers

Answer:

qns-4

1-multicellular organism

2-unicellular organism

3-unicellular organism

4-multicellular organism

5-unicellular organism

6-multicellular organism

7-unicellular organism

What are the general trends in first ionization energy across a period (LR) within the
periodic table? From bottom to top within a group?

Answers

Moving left to right within a period or upward within a group, the first ionization energy generally increases. As the atomic radius decreases, it becomes harder to remove an electron that is closer to a more positively charged nucleus. (this is copywriter so please just interpret)

what is a salient factor?

Answers

Answer:

technology is a silent factor

Explanation:

learned about it in computer class.

Other Questions
What do libraries help people find what is evaluation and reflective practice? In which one of the following instances is the rivalry among competing sellers generallyweaker?When the industry's product is costly to hold in inventory, perishable, or seasonalo When one or more rivals are dissatisfied with their business performance and are makingaggressive moves to attract more customersWhen there are so many rivals that any one company's actions have little direct impact onthe businesses of rivalswhen rivals have dissimilar costs and dissimilar industry outlooksWhen competing sellers are active in making fresh moves to improve their market standingand business performanceCopying, redistributing, or website posting is expressly prohibited and constituto copyright violationVersion 1070576 * Copyright 2021 by lo-Bus Software, ineNextEnd Quta< Previous Find the equation of the line shown. Pls helllppp BRAINLIEST1. TRUE or FALSE?: America suffered it's heaviest losses when they launched a ground assault on the island of Japan in 1945.2. TRUE or FALSE?: As they did during World War 1, Americans rationed foods and materials and purchased bonds during World War 2.3. TRUE or FALSE?: When FDR died, it became Vice President Winston Churchill's responsibility to decide whether or not to use nuclear weapons against Japan.4. TRUE or FALSE?: The code names for the bombs dropped on Japan were "Little Boy" and "Fat Man." do yalll believe all types of drama are important ? justify your answer how to proper care and maintenance of orchard trees and fruit trees includes plssss answerrrr the symbol between two reactants in a chemical equation? Which three sentences provide the BEST supporting details to the main idea of this passage? A) Citizens need to see the value in recycling as an important duty for everyone to enjoy! B) For this reason, plastic bottles and bags sit in landfills for years and years. C) Money never buys anyone happiness, at least not in the long run. D) These chemicals are also used in other products on store shelves. E) It's really hard to convince people to recycle plastic. In Spanish Please- Describe what you wanted to grow up to be when you were a child at a certain age. Explain whether your aspirations now are similar or different from those of your childhood. The model below represents a molecule of ammonia gas.Ammonia gas would be classified as?A) elementB) atomC) compoundD) mixture True or false ? : Suspension is a positive form of punishment that Youth Court uses veryfrequently true or false the fertilized ovary develops into a seed 8m+4m=12m...one solution.. two solutions.. no solutions.. infinite solutions.. which solution is it? 4(x + 7) = 38can you help me find the solution t the equation You may not know this, but you are home to a colony of bacteria. You may also not know it, but the health and happiness of that colony of bacteria have a direct effect on your own health and happiness. In short, if we are what we eat, then we may need to make bacteria part of our balanced breakfast.Microbes are single-celled organisms. They are literally everywhere. Microbes are in the air we breathe, on the surfaces of everything we touch, and inside our bodies. Microbes can be bacteria, fungi, protozoa, or viruses.A few years ago, scientists began studying the microbial life of our stomachs. Called The American Gut project, this study aims to understand the life of the bacteria that live in our digestive system. According to an article in the New York Times by Michael Pollan, the goal is to gather information on the types and amounts of bacteria in the human gut. Scientists want to describe what a normal healthy microbe and human relationship should look like inside our digestive system. While the research is still in the very early stages, scientists have learned the following:The strongest and healthiest microbe systems are those with a lot of variety.The guts of Americans have much less variety than the guts of other populations.Diets that include a lot of processed foods support less variation in bacteria.Studying the makeup of our individual bacteria communities will help scientists get a better idea of which bacteria help human bodies. We used to think that bacteria in our bodies were invaders. This new research suggests that bacteria are part of the protective army that keeps us healthy. In fact, our bodies have a hard time recovering from medicines like antibiotics because they disrupt the balance of helpful bacteria. It seems clear from the early evidence that living with bacteria helps us resist invasion from things that make us sick.Scientists have also learned that microbes might help our guts do things like process vitamins and important nutrients. Some microbes may help us deal with stress, or adapt to changes. Furthermore, there may come a timein your lifetimewhen illness is treated not with antibiotics, but with extra-special microbes that help us defend our bodies from illness.Based on "A Brief Study of Guts," which best summarizes the goal of new research into bacteria and microbes? A. To collect a wide variety of microbes in all mammals including humans B. To find ways to increase our intake of helpful microbes C. To find evidence to decrease the use of antibacterial soap D. To understand how microbes populate the human body and what benefit they provide will mark brainliestdown below Is this right? Answer quick please Is 12/25 greater than 1 PLEASE HELP! Which figure has the smaller volume, the cone with a diameter of 7 in. and a height of 5 in. or the sphere with a diameterof 5 in.? A. SphereB. Cone