please help im so confused= Find the position function if a velocity function is given by v(t) = 6+ e -2 s(t) = (Type an exact answer.)

Answer:

20 tins

Step-by-step explanation:

Since EACH dog eats 3/5 of a tin each day, that means that 3/5 + 3/5 or 6/5 of a tin is eaten everyday. Now that we know the daily amount, multiply it by 16 to find the number of tins for 16 days:

16* 6/5 = 19.2. Since we have to find the number of least entire tins, we round up to 20 tins.

For a pack of 52 cards, two cards are drawn together, the probability that one card is clubs and one card is spades is equals to the

[tex]= \frac{13}{102}[/tex]

Probability is chances of occurrence of an event. It is calculated by dividing the favourable response to the total possible outcomes. We have a pack of 52 cards. Let's consider an event E : card is one card is culb and one is spade

Total possible outcomes = 52

Two cards are drawn together from a pack. So, number of total possible outcomes for drawing two cards from a pack, n(T) = ⁵²C₂ = 1326

In a 52 cards pack, number of spades = 13

Number of clubs cards in pack = 13

Number of ways of choosing/drawing one spades card out of 13 and one one clubs out of 13 cards, n(E) = 169

Probability that one card is clubs and one card is spades on drawing two cards,

[tex] P(E) = \frac{ n(E)}{n(T)}[/tex]

[tex]= \frac{169}{1326}[/tex]

[tex]= \frac{13}{102}[/tex]

Hence, required probability value is [tex]= \frac{13}{102}[/tex].

For more information about probability, visit:

https://brainly.com/question/25870256

#SPJ4

The probability of the number of people who say auto racing is their favorite sport being more than 37 can be calculated using statistical methods.

This would require information on the total number of people surveyed, the number of people who said auto racing is their favorite sport, and other relevant data.

Depending on the specific scenario, the probability could be estimated or calculated exactly.

However, without this information, it is not possible to provide a specific answer to the question.

Therefore, it is important to have all relevant information and data before calculating probabilities or making any conclusions about the likelihood of an event occurring.

learn more about probability here:brainly.com/question/30034780

#SPJ11

The side lengths of the new triangle would be = 35⅖ and 15⅖.

To calculate the new lengths the formula for scale factor should be used;

That is;

Scale factor = Bigger dimensions/smaller dimensions.

Scale factor = 2/5

Smaller dimension length = 35

Smaller dimension width = 15

The bigger dimension length = 35×⅖ = 35⅖

The bigger dimension width = 15×⅖ = 15⅖

Learn more about scale factor here:

https://brainly.com/question/28339205

#SPJ1

Dr. Tremble's study is an example of quantitative research. This type of research involves the use of numerical data and statistical analysis to draw conclusions about a population.

In Dr. Tremble's study, he used surveys to collect data on the perceptions of faculty harassment from a sample of 57 colleges. By randomly selecting these colleges, he aimed to obtain a representative sample of the population of all colleges in the United States.

Quantitative research is useful for testing hypotheses and identifying patterns or trends in large sets of data. In Dr. Tremble's study, he can use statistical techniques to analyze the survey results and draw conclusions about the prevalence and nature of faculty harassment in colleges. He can also use the data to identify any patterns or trends in the types of colleges or faculty members that experience harassment.

Overall, quantitative research allows researchers like Dr. Tremble to draw generalizable conclusions about a population based on a sample. This makes it a valuable tool for studying large groups and identifying patterns that may not be apparent from individual cases or small-scale studies.

To know more about quantitative research, refer to the link below:

https://brainly.com/question/30472457#

#SPJ11

The constraint can then be written as: S ≤ 0.07 × T. This equation represents the constraint for the amount of sulfur in the chemical blend of X and can be incorporated into the linear programming model to ensure that the solution meets the given requirement.

The constraint can then be written as: S ≤ 0.07 × T, This equation represents the constraint for the amount of sulfur in the chemical blend of X and can be incorporated into the linear programming model to ensure that the solution meets the given requirement.

We are given that the amount of sulfur relative to the total output produced of chemical X may not exceed 7%. To express this constraint in a linear programming model, we can use the following equation:

Sulfur Content ≤ 0.07 × Total Output

Here, the "Sulfur Content" represents the total amount of sulfur present in the chemical blend, while "Total Output" refers to the total amount of chemical X produced. By setting the constraint to be less than or equal to 7% (0.07) of the total output, we are ensuring that the sulfur content does not exceed the given limit.

In a linear programming model, we usually use variables to represent quantities. Let S represent the Sulfur Content and T represent the Total Output. The constraint can then be written as:

S ≤ 0.07 × T

To learn more about equation click here

brainly.com/question/29657983

#SPJ11

Jill's suggestion to replace her missing score on Test 2 with her score on Test 1 is not a fair or accurate representation of her knowledge and abilities. Each test is designed to assess specific topics and skills, and by substituting one score for another, Jill is essentially cheating the system.

Moreover, the scores on Test 1 and Test 2 may not be comparable or of equal difficulty. Even if Jill performed well on Test 1, it does not guarantee that she would have performed equally well on Test 2. By suggesting this, Jill is also implying that she did not put in the effort to prepare for Test 2 and is not willing to accept the consequences of her actions.

Furthermore, allowing such a substitution sets a dangerous precedent and undermines the value and integrity of assessments. If students are allowed to substitute scores whenever they want, then the purpose of assessments is defeated, and there would be no way to accurately measure a student's knowledge or progress.

In conclusion, Jill's suggestion to replace her missing score on Test 2 with her score on Test 1 is not a viable solution. It is important to maintain the integrity of assessments and hold students accountable for their performance on each test.

Teachers should encourage their students to prepare thoroughly for each assessment and accept the outcomes, even if they are not what they had hoped for.

Know more about  assessment   here:

https://brainly.com/question/27724137

#SPJ11

To find the p-value for a corresponding left-tailed test, we need to divide the original p-value by 2 because the original test was two-tailed. This is because in a two-tailed test, we are interested in deviations from the null hypothesis in both directions (positive and negative). However, in a left-tailed test, we are only interested in deviations in the negative direction. So, the p-value for the corresponding left-tailed test would be 0.0670 / 2 = 0.0335.

Explanation:

In statistical hypothesis testing, a p-value is the probability of obtaining a test statistic as extreme or more extreme than the observed one, assuming that the null hypothesis is true.

In a two-tailed test, the null hypothesis is that there is no significant difference between the sample mean and the population mean. The alternative hypothesis is that the sample mean is significantly different from the population mean, either larger or smaller.

In a left-tailed test, the null hypothesis is that the sample mean is not significantly smaller than the population mean. The alternative hypothesis is that the sample mean is significantly smaller than the population mean.

To find the p-value for the corresponding left-tailed test, we need to calculate the probability of observing a test statistic as extreme or more extreme than the observed one, assuming the null hypothesis is true.

Since the original p-value is 0.0670, we know that the probability of observing a test statistic as extreme or more extreme than the observed one in a two-tailed test is 0.0670. This means that the probability of observing a test statistic in the left tail of the distribution is half of the original p-value, since it corresponds to only one tail of the distribution.

Therefore, the p-value for the corresponding left-tailed test is 0.0670/2 = 0.0335.

In other words, if we were to conduct a left-tailed test with the same sample, population, and null hypothesis is value, and if the observed test statistic was as extreme or more extreme than the one observed in the original two-tailed test, the probability of obtaining such a result or a more extreme one would be 0.0335, assuming the null hypothesis is true.

Know more about the null hypothesis click here:

https://brainly.com/question/30461126

#SPJ11

The more accurate method for calculating the total energy converted would be calculating the energy converted from the average power and total time.

To do this, follow these steps:

1. Determine the average power (in watts) during the given time period.
2. Calculate the total time (in seconds) of the conversion process.
3. Use the formula: Energy (in joules) = Average Power (in watts) x Total Time (in seconds).

This method provides a more accurate representation of the energy conversion as it takes into account the overall average power and time, rather than making multiple separate calculations and adding them together, which could result in potential discrepancies due to varying power levels throughout the process.

To know more about "Power" refer here:

https://brainly.com/question/13357691#

#SPJ

When cane sugar is dissolved in water, it converts to invert sugar over a period of several hours. The percentage of cane sugar that remains after 5 hours is 55.5%.

Given, f?(t) = -0.6f(t)

a) To find the percentage of cane sugar that remains after 5 hours, we need to solve the differential equation with an initial condition that f(0) = 100 (assuming all cane sugar is present at t=0).

Separating the variables, we have:

1/f(t) df/dt = -0.6

Integrating both sides with respect to t, we get:

ln|f(t)| = -0.6t + C

where C is the constant of integration.

Using the initial condition, we have:

ln|100| = -0.6(0) + C

C = ln|100|

Substituting the value of C, we get:

ln|f(t)| = -0.6t + ln|100|

Simplifying the expression, we get:

ln|f(t)/100| = -0.6t

Taking the exponential of both sides, we get:

|f(t)/100| = e^(-0.6t)

Since f(t) represents the percentage of unconverted cane sugar, we have:

[tex]f(t)/100 = e^{(-0.6t)[/tex]

Substituting t=5, we get:

f(5)/100 = [tex]e^{(-0.6*5)[/tex]

f(5) = 55.5

Therefore, the percentage of cane sugar that remains after 5 hours is 55.5%.

b) To find the percentage of cane sugar that remains after 10 hours, we can use the same differential equation and solve with the initial condition that f(0) = 100.

Following the same steps as above, we get:

Following the same steps as above, we get:

f(10) = 23.1

Therefore, the percentage of cane sugar that remains after 10 hours is 23.1%.

For more details regarding percentage, visit:

https://brainly.com/question/29306119

#SPJ1

Therefore, Assuming that approximately 20% of the lake's trout population was marked, we can estimate that the lake contains approximately 250 trout.

To find the probability L(N) that 16 trout are marked in a sample of 80, we need to use the hypergeometric distribution formula. The formula is P(X=k) = [C(M,k) * C(N-M,n-k)] / C(N,n), where M is the total number of trout in the lake, N is the number of trout in the sample (80), k is the number of marked trout in the sample (16), and n is the sample size (50). Plugging in the values, we get P(X=16) = [C(M,16) * C(M-50,34)] / C(M,80). We don't know the exact value of N, but we can estimate it using the fact that 16 out of 80 trout were marked, which means that approximately 20% of the lake's trout population was marked. Therefore, we can estimate that the lake contains approximately 250 trout (i.e., 50 / 0.2). Writing the main answer in 2 lines: The probability L(N) that 16 trout are marked in a sample of 80 can be estimated using the hypergeometric distribution formula.

Therefore, Assuming that approximately 20% of the lake's trout population was marked, we can estimate that the lake contains approximately 250 trout.

To know more about probability visit :

https://brainly.com/question/13604758

#SPJ11

There is only a 0.62% chance that the average length will be less than 2.4 inches. Therefore, we can conclude that it is unlikely for the average length of 100 randomly selected fish to be less than 2.4 inches.

Use the central limit theorem, which states that the distribution of sample means will be approximately normal regardless of the distribution of the population, as long as the sample size is large enough.

In this case, we are given that the length of one kind of fish is normally distributed, with a mean of 2.5 inches and a standard deviation of 0.4 inches. We want to find the probability that the average length of 100 randomly selected fish is less than 2.4 inches.

To apply the central limit theorem, we need to calculate the mean and standard deviation of the sampling distribution of the sample mean. The mean of the sampling distribution will be equal to the population mean, which is 2.5 inches. The standard deviation of the sampling distribution can be calculated using the formula:

standard deviation = population standard deviation / square root of sample size

In this case, the population standard deviation is 0.4 inches, and the sample size is 100, so:

standard deviation = 0.4 / sqrt(100) = 0.04 inches

Now that we have the mean and standard deviation of the sampling distribution, we can use the z-score formula to find the probability of obtaining a sample mean of less than 2.4 inches:

z = (sample mean - population mean) / standard deviation

z = (2.4 - 2.5) / 0.04 = -2.5

Using a standard normal distribution table, we can find that the probability of obtaining a z-score of -2.5 or less is approximately 0.0062. This means that the probability of obtaining a sample mean of less than 2.4 inches is approximately 0.0062.

In other words, if we were to randomly select 100 fish from this population and calculate the average length, there is only a 0.62% chance that the average length would be less than 2.4 inches. Therefore, we can conclude that it is unlikely for the average length of 100 randomly selected fish to be less than 2.4 inches.

To learn more about standard deviation click here

brainly.com/question/23907081

#SPJ11

Let's denote the amount of the metal containing 20% nickel that needs to be combined as 'x' pounds.

The amount of nickel in the metal containing 20% nickel is 20% of 'x', which can be expressed as 0.2x pounds.

The amount of nickel in the metal containing 80% nickel is 80% of 6 pounds, which can be expressed as 0.8 * 6 = 4.8 pounds.

To form an alloy containing 60% nickel, the total amount of nickel in the alloy should be the sum of the nickel amounts in each metal. Therefore, we can set up the equation:

0.2x + 4.8 = 0.6(x + 6)

Simplifying and solving for 'x':

0.2x + 4.8 = 0.6x + 3.6

0.2x - 0.6x = 3.6 - 4.8

-0.4x = -1.2

x = -1.2 / -0.4

x = 3

Therefore, 3 pounds of the metal containing 20% nickel must be combined with 6 pounds of the metal containing 80% nickel to form an alloy containing 60% nickel.

To know more about nickel refer here

https://brainly.com/question/3039765#

#SPJ11

The expected loss without the generator ($495,000) is less than the cost of installing the generator ($800,000), it would not be economically justifiable for the bank to install the new power generator based on this decision tree analysis.

The management of First American Bank faces a decision regarding the installation of an emergency power generator to mitigate potential losses from physical catastrophes such as power failures or fires.

To evaluate this decision, we can use decision tree analysis.

Without the generator, there is a 10% chance of a power outage. In the event of an outage, there is a 0.05 probability of very large losses ($80 million) and a 0.95 probability of slight losses ($1 million). To calculate the expected loss from not installing the generator, we can use the following formula:

Expected loss = (probability of outage) x [(probability of large loss x large loss amount) + (probability of slight loss x slight loss amount)]

Expected loss = 0.1 x [(0.05 x $80 million) + (0.95 x $1 million)]
Expected loss = 0.1 x [$4 million + $950,000]
Expected loss = 0.1 x $4.95 million
Expected loss = $495,000

Now let's compare this expected loss to the cost of installing the emergency power generator, which is $800,000. Since the expected loss without the generator ($495,000) is less than the cost of installing the generator ($800,000), it would not be economically justifiable for the bank to install the new power generator based on this decision tree analysis.

To learn more about probability  click here

brainly.com/question/30034780

#SPJ11

(a) The standard deviation of the required distribution for vitamin C is approximately 7.98 mg/d.
(B) The plot should show a bell-shaped curve centered at 60 mg/d, with the RDA located slightly to the right of the center.

(a) To determine the standard deviation of the required distribution for vitamin C, we can use the information provided about the estimated average requirement (EAR) and the recommended dietary allowance (RDA). The EAR is the mean of the distribution (60 mg/d), and the RDA (75 mg/d) is assumed to be the 97.72 percentile.

We can use the Z-score formula to find the standard deviation:

Z = (X - μ) / σ

Where Z is the Z-score, X is the value of the RDA, μ is the mean (EAR), and σ is the standard deviation.

First, find the Z-score corresponding to the 97.72 percentile. Using a standard normal table or calculator, we find that Z ≈ 2.0.

Now, plug in the values into the Z-score formula:

2.0 = (75 - 60) / σ
σ = (75 - 60) / 2.0
σ = 15 / 2.0
σ = 7.5 mg/d
Plugging in the values, we get:
1.88 = (75 - 60) / σ

Solving for σ, we get:
σ = (75 - 60) / 1.88 = 7.98

The standard deviation of the required distribution is 7.5 mg/d.

(b) To sketch the distribution of vitamin C requirements for 19- to 30-year-old women, follow these steps:

1. Draw a normal distribution curve.
2. Mark the mean (EAR) at 60 mg/d on the horizontal axis.
3. Mark the RDA at 75 mg/d and the UL at 2000 mg/d on the horizontal axis.
4. Indicate that the standard deviation is 7.5 mg/d.

The distribution of vitamin C requirements for 19- to 30-year-old women is Normal, with a mean of 60 mg/d and a standard deviation of 7.98 mg/d. The EAR, RDA, and UL can be marked on the plot as follows:

- EAR: 60 mg/d, located at the center of the distribution
- RDA: 75 mg/d, located at the 97.72 percentile of the distribution
- UL: 2000 mg/d, located at the far right end of the distribution (beyond the range of the plot)

Learn more about Standard Deviation:

brainly.com/question/23907081

#SPJ11

Answer: Option B ($1200 at 8% compound interest per annum for 2 years) is a better investment.

Step-by-step explanation:

In option A, the interest is calculated on the principal amount only, which is known as simple interest.

Simple Interest Formula:

Simple Interest = (P × R × T) / 100

Where P is the principal amount, R is the rate of interest and T is the time period.

So, for option A:

P = $1200

R = 9%

T = 2 years

Simple Interest = (1200 × 9 × 2) / 100 = $216

Total Amount = Principal + Simple Interest = $1200 + $216 = $1416

In option B, the interest is calculated on the principal amount as well as the interest earned in previous years, which is known as compound interest.

Compound Interest Formula:

Total Amount = P (1 + R/100) ^n

Where P is the principal amount, R is the rate of interest and n is the number of years.

So, for option B:

P = $1200

R = 8%

n = 2 years

Total Amount = 1200 (1 + 8/100) ^2 = $1369.86

As we can see, option B yields a higher total amount compared to option A, so it is a better investment choice.

Answer:

[tex]y = {(x - 2)}^{2} - 3[/tex]

[tex]y = {x}^{2} - 4x + 1[/tex]

b = -4 and c = 1

The sum of the convergent geometric series is 5/4, or 1.25. The given infinite geometric series is 1, 1/5, 1/25, 1/125, ...

To determine if this series is convergent or divergent, we need to examine the common ratio (r) between each term. The common ratio can be calculated by dividing a term by its previous term. For example, (1/5) / 1 = 1/5, (1/25) / (1/5) = 1/5, and so on. Thus, the common ratio (r) is 1/5.

A geometric series converges if the absolute value of its common ratio is less than 1 (i.e., |r| < 1). In this case, since |1/5| < 1, the series is convergent.

To find the sum of the convergent geometric series, we use the formula:

S = a / (1 - r)

where S is the sum of the series, a is the first term, and r is the common ratio.

Here, a = 1 and r = 1/5. Plugging these values into the formula, we get:

S = 1 / (1 - (1/5))

S = 1 / (4/5)

S = 5/4

Thus, the sum of the convergent geometric series is 5/4, or 1.25.

Learn more about geometric here:

https://brainly.com/question/13008517

#SPJ11

Answer:

D

Step-by-step explanation:

93.6/2/7.8=6

If the probability of event E is 1, then event E will definitely occur. Therefore, the correct answer is b.

It is important to note that if the probability of an event is 1, then it is certain to occur and there is no possibility of it not occurring. This means that event E is not impossible (a), not disjoint (c), and not dependent (d) since it will occur regardless of any other events. Based on the information provided, if the probability of event E is 1, then option b. event E will definitely occur. This is because a probability of 1 indicates that the event is certain to happen.

More on probability: https://brainly.com/question/6012025

#SPJ11

When working with fractions, it's important to know the difference between operations with and without regrouping, as well as how to handle whole number fractions and mixed numbers.

1. Without regrouping: To subtract fractions without regrouping, the denominators should be the same. For example, 5/6 - 3/6 = 2/6. In this case, simply subtract the numerators and keep the same denominator.

2. With regrouping: If you need to subtract fractions with regrouping, it often involves mixed numbers. For example, 2 3/4 - 1 1/2. First, make the fractions' denominators the same: 2 6/8 - 1 4/8. Next, regroup (borrow) 1 from the whole number, turning it into an 8/8 fraction: 1 14/8 - 1 4/8. Finally, subtract the fractions: 1 10/8. Simplify, if necessary.

3. Whole number fractions: Whole numbers can be expressed as fractions with a denominator of 1. For example, 3 = 3/1. This allows for easy comparison and operations with other fractions.

4. Mixed numbers: Mixed numbers consist of a whole number and a fraction, like 1 2/3. To perform operations with mixed numbers, it's often helpful to convert them into improper fractions, then proceed with the addition or subtraction.

Remember to always simplify your final answer and, when needed, convert improper fractions back to mixed numbers.

Visit here to learn more about whole number  : https://brainly.com/question/29766862
#SPJ11

If the absolute value of the correlation is very close to 0, the error in prediction will be high.

This is because a correlation close to 0 indicates that there is no strong relationship between the variables, and therefore it is difficult to accurately predict one variable based on the other. A correlation value of zero or almost zero indicates that there is no significant link between the variables. A perfect correlation, or coefficient of -1.0 or +1.0, means that changes in one variable exactly anticipate changes in the other. A value of 1 indicates a direct and flawlessly positive link.

No linear relationship exists when the correlation coefficient is 0.

Learn more about correlation: https://brainly.com/question/11663530

#SPJ4

If the absolute value of the correlation is very close to 0, the error in prediction will be high. The correct answer is D.

When the absolute value of the correlation coefficient is very close to 0, it indicates a weak or negligible linear relationship between the variables being studied. In this case, the variables have little or no linear association.

A low correlation means that there is no strong linear pattern or trend in the data. As a result, it becomes difficult to make accurate predictions or estimates based on the relationship between the variables. The lack of a strong relationship means that the variability in one variable does not provide meaningful information about the variability in the other variable.

Therefore, when the absolute value of the correlation is close to 0, the error in prediction tends to be high. This means that the predicted values based on the weak correlation are likely to deviate significantly from the actual values.

The lack of a strong relationship makes it challenging to accurately estimate or predict one variable based on the other variable.  The correct answer is D.

Learn more about correlation here: brainly.com/question/20366773

#SPJ11

Answer:

a.)

10,000 steps

b.)

Janet - 0%

Brenda - 25%

c.)

7 days

Step-by-step explanation:

I'm unsure if this is entirely correct because I haven't done box plots in a few years. I'm sorry if I get something wrong.

The moment of inertia of the rectangular steel bar about its weak axis is 75.6 inches^4.   The moment of inertia, I, of a rectangular steel bar about its weak axis can be calculated.

Using the formula

I = (1/12) * b * h^3,

where b is the width of the section and h is the height of the section. In this case, the width is 2.8 inches and the height is 6 inches.

Substituting the values in the formula, we get I = (1/12) * 2.8 * 6^3 = 75.6 inches^4. Therefore, the moment of inertia of the rectangular steel bar about its weak axis is 75.6 inches^4.

The moment of inertia is an important property of a section that determines its resistance to bending. It is commonly used in structural engineering to design beams and columns that can withstand the loads and stresses applied to them. Knowing the moment of inertia of a section helps engineers to calculate the deflection, stress, and strain in a structure under different loading conditions.

Learn more about rectangular here:

https://brainly.com/question/21308574

#SPJ11

From the given data which shows the length of fish in a pond, there is an outlier at 7.

Hence, the correct option is B.

To determine if the data contains any outliers, we can use the interquartile range (IQR) method. First, we need to find the median and the quartiles of the data set

Arrange the data in order 7, 9, 11, 13, 15, 15, 19, 28.

Median (Q2) = the middle value = 15.

Q1 (the first quartile) = the median of the lower half of the data set = 9.

Q3 (the third quartile) = the median of the upper half of the data set = 19.

Next, we can calculate the IQR as the difference between the third and first quartiles

IQR = Q3 - Q1 = 19 - 9 = 10.

Finally, we can identify any outliers as values that are more than 1.5 times the IQR above the third quartile or below the first quartile.

The upper outlier bound is Q3 + 1.5 x IQR = 19 + 1.5 x 10 = 34.

The lower outlier bound is Q1 - 1.5 x IQR = 9 - 1.5 x 10 = -6.

Since the minimum value in the data set is 7, which is greater than the lower outlier bound, we have an outlier at 7. The maximum value in the data set is 28, which is less than the upper outlier bound, so it is not an outlier.

Hence, the correct option is B.

To know more about outlier here

https://brainly.com/question/31174001

#SPJ1

To calculate the probability that the resulting product is even, we need to first determine the total number of possible outcomes. There are 90 two-digit numbers ranging from 10 to 99. If we choose two different numbers, there are a total of 90C2 (90 choose 2) possible combinations, which is equal to 4,005.

To calculate the number of even products, we need to consider the different scenarios. If one of the numbers is even, the product will also be even. There are 45 even numbers in the range from 10 to 99, so the number of even products that can be formed from an even number and an odd number is 45 x 45 = 2025.

If both numbers are odd, then the product will also be odd, and hence not even. There are 45 odd numbers in the range from 10 to 99, so the number of odd products that can be formed from an odd number and an odd number is 45 x 44 = 1980.

Therefore, the total number of even products that can be formed is 2025. The probability that the resulting product is even is then 2025/4005, which simplifies to 9/17, or approximately 0.5294. So, there is a 52.94% chance that the resulting product will be even.

To know more about probability visit:

https://brainly.com/question/29381779

#SPJ11

Answer:

a) Her reasoning is wrong because √50 does not simplify to 2√25, it simplifies to 5√2. With her thinking that √50 simplifies to 2√25, then this leads to her doing 2 * 5 which equals 10.

b) To estimate a square root, you have to find two square numbers that make the number lie in between the two squares. In this case we need to find two square numbers where one square number is smaller than 50 and the other one is bigger. You should have found the two square numbers to be 7 and 8 because 7² = 49 and 8² = 64. Now we divide 50 by either number, either 7 or 8. As we can't use a calculator it is easier to divide 50 by 8 than 7. 50/8 = 6.25 Now we find the average of 6.25 and 8 which is 14.25/2 = 7.125 7.125 rounded to the nearest tenth is 7.1 Therefore the answer for b is 7.1

Answer:

(a) √50 is not equal to 10.

√50 = √25√2 = 5√2

(b) √50 = 5√2 = 5(1.41) = 7.05 = 7.1

If the coefficient is negative and statistically significant, this would suggest that the punishment is having a deterrent effect on the behavior in question. since, we are only using two years of data and there could be other factors that are influencing the outcome.

To estimate the equation by fixed effects using the 1990 and 1993 data, we can follow a few steps. First, we need to create a new variable that represents the first difference between the dependent variable and each of the independent variables. This means subtracting the value of each variable in 1990 from the value of the same variable in 1993. This will give us the change in each variable over time.

Know more about the statistically significant,

https://brainly.com/question/15848236

#SPJ11