PLEASE HELP ANSWER QUICK 55 POINTS RIGHT ANSWERS ONLY :)

PLEASE HELP ANSWER QUICK 55 POINTS RIGHT ANSWERS ONLY :)

Answers

Answer 1

Using the formula they gave us:

BP solution = BP benzene + change in temperature (we found before to be 5.3)

So substituting the values:

BP solution = 80.1 + 5.3

= 85.4°C

Answer 2

Answer:

The answer is 85.4°C

Explanation:

Bp=80.1°C

◇Tb=5.3°C

Bp solution=BP beneze +◇Tb

BP=80.1+5.3

BP=85.4°C


Related Questions

Relative humidity is described as: Group of answer choices a basically unused concept when it comes to weather topics. the amount of water vapor in the air at a given temperature expressed as a percentage of the water vapor capacity of the air. the amount of water vapor in the air compared to the normal amount. the amount of moisture in the air relative to your own sensible feelings.

Answers

Correct answer:

The relative humidity is best described as the amount of water vapor in the air at a given temperature expressed as a percentage of the water vapor capacity of the air.

What is relative humidity?

The ratio of the current absolute humidity to the highest absolute humidity is known as relative humidity (which depends on the current air temperature).

Water vapor is also measured by relative humidity, which is stated as a percentage but RELATIVE to the air's temperature. In other words, it is a comparison between the amount of water vapor that is actually present in the air and the maximum amount of vapor that is possible for the air at the current temperature.

With the same quantity of absolute/specific humidity, air will have a HIGHER relative humidity if it is cooler and a LOWER relative humidity if it is warmer because warm air may contain more water vapor (moisture) than cold air. The actual amount of moisture (absolute humidity) in the air is what we "feel" outside.

Learn more about relative humidity here,

https://brainly.com/question/14104185

#SPJ4

Which solution could be used to precipitate the calcium ion form a water sample?

Answers

Calcium carbonate ([tex]CaCO_{3}[/tex]), an insoluble precipitate that could be removed from water by filtration, is created when the calcium ion in hard water bonds with the carbonate ion.

Precipitates may be ionic solids that are insoluble and result from reactions between certain cations as well as anions in water. A precipitate's formation could be influenced by a variety of circumstances.

When calcium atoms gain or lose electrons, they change their charge but also reactivity, forming calcium ions.

Therefore, Calcium carbonate ([tex]CaCO_{3}[/tex]), could be used to precipitate the calcium ion form a water sample

To know more about calcium ion and precipitate

https://brainly.com/question/18109776

#SPJ4

A 100 cc bottle of Amoxicillin 125 oral suspension requires addition of 61 ml of Purified Water to make 100 cc. What is the powder volume

Answers

A 100 cc bottle of Amoxicillin 125 oral suspension requires addition of 61 ml of Purified Water to make 100 cc.  The powder volume is 76.25.

How do you calculate powder volume ?

To calculate the powder volume use the expression

[tex]\frac{H}{Q} = \frac{D}{X}[/tex]

where,

H = Dose on hand

Q = Quantity on hand

D = Desired dose

X = Quantity desired

Now put the values in above expression we get

[tex]\frac{H}{Q} = \frac{D}{X}[/tex]

[tex]\frac{100}{61} = \frac{125}{X}[/tex]

[tex]X = \frac{125 \times 61}{100}[/tex]

X = 76.25

Thus from the above conclusion we can say that A 100 cc bottle of Amoxicillin 125 oral suspension requires addition of 61 ml of Purified Water to make 100 cc.  The powder volume is 76.25.

Learn more about the Amoxicillin here: https://brainly.com/question/28001741

#SPJ4

what is the color of phenolphthalein in weak base

Answers

Answer:

Pink

Explanation:

Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions.

hope it helps you and give me a brainliest

Answer:

pink

Explanation:

Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions.

{Mark as brainlest answer}

Given the balanced equation: 2KClO3 --> 2KCl 3O2 What type of reaction is represented by this equation

Answers

The correct option is (2) decomposition.

In the balanced equation 2KClO3==> 2KCl + 3O2, as there is a reduction of oxygen therefore it is decomposition reaction.

What is decomposition reaction?

A chemical reaction that results in the breakdown of one reactant into two or more reactants is known as a decomposition reaction.

The general equation for decomposition is-

AB -> A + B

Where A & B are now the product molecules and AB is the parent (reactant) molecule.

Some key features of the decomposition reaction are-

A combination reaction is the opposite of the a decomposition reaction. In such reactions, a single product is created form two or even more reactants.Decomposition processes are not always endothermic. Both endothermic and exothermic reactions can take place during decomposition. This one is more typical than the former, though.Extraction of metal from their ores is a significant use of decomposition processes. For instance, by putting calamine through a breakdown reaction, zinc can be extracted. The same process can be used to make sodium form sodium chloride (NaCl).A type of decomposition reaction known to be a double decomposition reaction involves the exchange of positive and negative ions between two constituent reactants to create two new molecules.

To know more about decomposition reaction, here

https://brainly.com/question/21491586

#SPJ4

The complete question is-

Given the balanced equation:

2KClO3==> 2KCl + 3O2

Which type of reaction is represented by this equation?

(1) synthesis

(2) decomposition

(3) single replacement

(4) double replacement

The main acid in the stomach is hydrochloric acid (HCl). Which chemical equations show a reaction that occurs when someone takes an antacid

Answers

Answer:

Mg(OH)2(s) + 2HCl(aq) => MgCl2(aq) + 2HCl(l)

Explanation:

The reaction that occurs in the stomach when one takes an antacid {Mg(OH)2} is termed as Neutralization reaction as it reacts with hydrochloric acid to form magnesium hydroxide and water.

The equation of reaction:

Mg(OH)2(s) + 2HCl(aq) => MgCl2(aq) + 2HCl(l)

_____ in carbon dioxide in your red blood cells, which causes _____ in ph, causes your breathing to speed up.

Answers

Increase in carbon dioxide in your red blood cells, which causes a drop in pH, causes your breathing to speed up.

The presence of  carbon dioxide in red blood cell will lower the pH because  carbon dioxide combines with water to form [tex]H^{+}[/tex] and [tex]HCO_{3} ^{-}[/tex] .

About 70% of Carbon dioxide transported as bicarbonate ion in the plasma of the red blood cells .When carbon dioxide diffuses across the cell membrane of erythrocyte then it reacts with water to form carbonic acid.This carbonic acid breaks into bicarbonate ion and proton  in the presence of carbonic anhydrase . this is because it is very unstable.This hydrogen ions binds to the hemoglobin and which results in initiation of bohr effect .So, as concentration of hydrogen ions increases pH of the blood decreases.

learn about carbonic acid

https://brainly.com/question/13929437

#SPJ4

At the stoichiometric (equivalence) point in a titration of benzoic acid with naoh(aq) shown by equation 3, the ph is:_______

Answers

Benzoic acid is one of the weakest acid for titration. The pH of the salt solution generated is the pH greater than 7( >7 ) at the equivalence point in any titration.

The benzoate anion, combines with water to create OH- and undissociated benzoic acid. This reaction is stronger than OH-. As a result of the hydroxide ions generated by this reaction, the final solution has a pH greater than 7. Hydrolysis is the term for an ion's reaction with water, such as the benzoate ion.

What is titration?A titration is a method for figuring out the concentration of an unknown solution by using a solution with known concentration.Until the reaction is finished, the titrant (the known solution) is typically added from a buret to a known volume of the analyte (the unknown solution).The concentration of the unknown can be determined by knowing the amount of titrant that was added. An indicator is frequently used to indicate the reaction's endpoint or end of the reaction.

Know more about titration numerical https://brainly.com/question/14501686

#SPJ4

please help me with this question, and if u can do it on paper

Answers

1. O2 is the limiting reagent

2. Excess NH3 = 0.102 moles

3. 0.088 mol of NO is formed

4. 2.376 grams of H2O is formed

Stoichiometric problem

From the equation: [tex]4NH_3 + 5O_2 --- > 4NO + 6H_2O[/tex]

Mole ratio of NH3 and O2 = 4:5

Mole of 3.25 g NH3 = 3.25/17 = 0.19 mol

Mole of 3.50 g O2 = 3.5/32 = 0.11 mol

Equivalent mole of O2 from NH3 = 5/4 x 0.19 = 0.24 mol

Equivalent mole of NH3 from O2 = 4/5 x 0.11 = 0.088 mol

Thus, O2 is the limiting reagent.

Excess NH3 = 0.19 - 0.088 = 0.102 moles

Mole ratio of O2 and NO = 5:4

Equivalent mole of NO = 4/5 x 0.11 = 0.088 mol

Mole ratio of O2 and H2O = 5:6

Equivalent mole of H2O = 6/5 x 0.11 = 0.132 mol

Mass of 0.132 mol H2O = 0.132 x 18 = 2.376 grams

More on stoichiometric problems can be found here: https://brainly.com/question/15047541

#SPJ1

Two-thirds of a bone's weight is composed of calcium phosphate which interacts with calcium hydroxide to form crystals of __________.

Answers

Two-thirds of a bone's weight is composed of calcium phosphate which interacts with calcium hydroxide to form crystals of hydroxyapatite

The two component of bones are 33% organic matter and 67% inorganic matter( Calcium phosphate and  hydroxyapatite crystal).Calcium phosphate make up almost 2/3 of the bone's weight.Collagen fibers make up almost 1/3 of the bone's weight.The calcium phosphate interacts with calcium hydroxide to form crystals of hydroxyapatite, whose molecular formula is [tex]Ca_{10} (PO_{4} )_{6} (OH)_{2}[/tex]

learn about  calcium phosphate

https://brainly.com/question/11082654

#SPJ4

The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. How many grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution

Answers

The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. 262 grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution

Define Solute

A solute is a material that dissolves in a solution. The amount of solvent present in fluid solutions is greater than the amount of solute. The two most common examples of solutions in daily life are salt and water. Salt is the solute because it dissolves in water.

forms of ratios for product concentration or yield:-w/v:- Weight by volume or weight per volume are the terms used. Any solid compound's concentration in a liquid can be calculated using it. It is measurable in gm/ml.Weight by weight ratio is referred to as w/w.It is employed to determine the final yield of the compound obtained from the starting compound. as in —mg/—gm.

       It provides the real yield of the substance or item.

Volume/volume. It is used to specify a liquid's composition or percent in a liquid compound.

using w/v we can calculate the weight of sucrose:-

40.0% means 40 g sucrose/ 100 g solution

40.0g sucrose x (655/100)=grams of sucrose

262  grams of sucrose are needed to make 655 mL of a 40.0% (w/v) sucrose solution.

Learn more about Solute here:-

https://brainly.com/question/14397121

#SPJ4

A sample of neon gas in a bulb is at 149.05 °C and 349.84 kPa. If the pressure drops
to 103.45 kPa, what is the new temperature (in °C)? Provide your answer to two
decimals.

Answers

The new temperature (in °C) of the gas, given the data is –148.20 °C

Data obtained from the question Initial temperature (T₁) = 149.05 °C = 149.05 + 273 = 422.05 KInitial pressure (P₁) = 349.84 KPa Volume = constant New pressure (P₂) = 103.45 KPaNew temperature (T₂) =?

How to determine the new temperature

The new temperature of the gas can be obtained by using the combined gas equation as illustrated below:

P₁V₁ / T₁ = P₂V₂ / T₂

Since the volume is constant, we have:

P₁ / T₁ = P₂ / T₂

349.84 / 422.05 = 103.45 / T₂

Cross multiply

349.84 × T₂ = 103.45 × 422.05

Divide both side by 349.84

T₂ = (103.45 × 422.05) / 349.84

T₂ = 124.80 K

Subtract 273 from 124.80 K to express in degree celsius

T₂ = 124.80 – 273

T₂ = –148.20 °C

Learn more about gas laws:

https://brainly.com/question/6844441

#SPJ1

For a phase change, H = 2 kJ/mol and S = 0.017 kJ/(K-mol). What are
G and the spontaneity of the phase change at 500 K?
A. G=-6.5 kJ; nonspontaneous
B. G= 10.5 kJ; spontaneous
C. G= 10.5 kJ; nonspontaneous
D. G=-6.5 kJ; spontaneous

Answers

The reaction has a change in free energy of -6.5 kJ and is spontaneous Option D.

What is a spontaneous reaction?

The term spontaneous reaction refers to a reaction that occurs with n external input of energy. We know that a spontaneous reaction is one in which the value of the change in free energy is negative. If the change in the free energy is positive then the reaction is nonspontaneous.

If the value of the change in free energy is zero then it follows that the reaction has attained equilibrium.

Now;

ΔG = ΔH - TΔS

ΔH = 2 kJ/mol

T =  500 K

ΔS =  0.017 kJ/(K-mol)

When we substitute values;

ΔG = 2 kJ/mol - (500 K * 0.017 kJ/(K-mol))

ΔG = -6.5 kJ

It the follows that the reaction has a change in free energy of -6.5 kJ and is spontaneous Option D.

Learn more about spontaneous reaction:https://brainly.com/question/13790391

#SPJ1

Draw an atomic structure of Sodium (Na). What are sub-atomic particles?​

Answers

Sodium represents by the (Na).

which of the following pairs would have a larger size? explain your answer.
K or K^(+)
Br or Br^(-)

Answers

Answer:

k ion is the largest size of the radius it is always smaller compared to the parent ion

Explanation:

PLEASE I NEED HELP ASAP!!!!

1.)Alex reacts 40.0 grams of substance X with 850 mL of 1.0 mol/L solution of hydrochloric acid. What is the maximum mass of carbon dioxide gas that could be obtained from this reaction?


2.)Jess reacts 25.0 grams of substance X with 40.0 mL of 2.0 mol/L of sodium hydroxide solution. The reaction yielded 2.5 grams of calcium hydroxide. Calculate the theoretical yield of calcium hydroxide and %Yield for the reaction.

Answers

The percent yield of the calcium hydroxide is 84.5%.

What is stoichiometry?

Stoichiometry enables us to obtain the mass of a substance form the equation of the reaction.

The equation of the reaction is;

CaCO3 + 2HCl -----> CaCl2 + CO2 + H2O

Number of moles of X = 40.0 grams/100 g/mol = 0.4 moles

Number of moles of HCl = 850/1000 * 1 M = 0.85 moles

If 1 mole of CaCO3 reacts with 2 moles of HCl

0.4 moles of  CaCO3 reacts with  0.4 moles  * 2 moles/1 mole

= 0.8 moles of HCl

Hence X is the limiting reactant.

The reaction is 1:1 then the amount of CO2  produced is 0.4 moles

Mass of CO2 = 0.4 CO2 * 44 g/mol = 17.6 g

2) The reaction equation is; 2NaOH + CaCO3 --->  Ca(OH)2 + Na2CO3

Number of moles of X = 25.0 grams/100 g/mol =  0.25 moles

Number of moles of NaOH= 40/1000 L * 2 M = 0.08 moles

If 1 mole of X reacts with 2 moles of NaOH

0.25 moles  reacts with   0.25 moles   * 2 moles /1 mole

= 0.5 moles

NaOH is the limiting reactant

2 moles of NaOH produces 1 mole of CO2

0.08 moles of NaOH produces 0.08 moles * 1 mole/2 moles

= 0.04 moles of CO2

Theoretical yield of CO2 =  0.04 moles of CO2 * 74 g/mol = 2.96  g

Percent yield = 2.5 g/ 2.96  g * 100

= 84.5%

Learn ore about percent yield:https://brainly.com/question/17042787

#SPJ1

Blank + BaCl2 = BaSO4 + 2NaCl
How to complete this chemical reaction so that it is a Double displacement reaction

Answers

The blank is filled by Na₂SO₄, and the complete equation for the double displacement reaction is:

Na₂SO₄ + BaCl₂ = BaSO₄ + 2 NaCl

What is a double displacement reaction?

It is a reaction in which both reactants exchange anions and cations.

Let's consider the following incomplete double displacement reaction.

_____ + BaCl₂ = BaSO₄ + 2 NaCl

If we compare the left and right sides, we can see that the missing ions in the left side are Na⁺ and SO₄²⁻. Thus, the missing compound is Na₂SO₄. The complete equation is:

Na₂SO₄ + BaCl₂ = BaSO₄ + 2 NaCl

Learn more about double displacement here: https://brainly.com/question/23918356

#SPJ1

23
What is the mass of 3.01 x 10 atoms of neon?

Answers

Answer:

10.0 g

Explanation:

Avogadro's law states that there are 6.02 × 10²³ molcules in one mole of a substance, so we know that this sample has half a mole of neon.

The atomic mass of neon is 20.1797 g/mol, so 0.5 mol has a mass of about 10.0 g.

it is 10.09 g

According to Avogadro;

1 mole of neon would have 6.022 x 10^23 atoms

3.0 x 10^23 atoms of neon would have:

            3.0 x 10^23/6.022 x 10^23

                                         = 0.5 moles

mass of 0.5 moles neon = mole x molar mass

                                            = 0.5 x 20.18

                                             = 10.09 g

mark me brainliest

Provide the organometallic reagent that is needed to perform the transformation shown below. The reagent should be formatted as LiR or BrMgR, where R is an alkyl group written as a Condensed Formula. Do not use subscripts.

Answers

The correct answer is   [tex]LiCH_{3}CH(CH_{3} )CH_{3}[/tex] .

Organometallic reagent

Organometallic chemistry is the study of organometallic compounds, which are substances that contain at least one chemical bond between a carbon atom from an organic molecule and a metal. These substances include alkali, alkaline earth, and transition metals, as well as metalloids like boron, silicon, and selenium. In addition to links to organyl fragments or molecules, bonds to 'inorganic' carbon, such as those to carbon monoxide (metal carbonyls), cyanide, or carbide, are also typically regarded as organometallic. Although they are not strictly speaking organometallic compounds, some similar compounds, such as transition metal hydrides and metal phosphine complexes, are frequently included in discussions of such substances. The phrase "metalorganic compound," which is comparable but different, describes molecules that contain metals but do not have direct metal-carbon bonds but do have organic ligands.

Learn more about organometallic reagent here:

https://brainly.com/question/13299409

#SPJ4

Lead-202 has a half-life of 53,000 years. How long will it take for 15/16 of a sample of lead-202 to decay?.

Answers

Answer:

212 000 yrs

Explanation:

15/16 decay means 1/16 is left

 how many halflives is this?

                    (1/2)^n = 1/16

                       n = 4   half lives

4 half lives * 53 000 yr/ half life = 212 000 yrs

Answer:

c. 212,000 years

Explanation:

got it right on edge:3

What is the purpose of a signal phrase?

6.01 formation of the solar system

Answers

Answer: The purpose is to analyze the speed of planets around a central star.

Explanation: using variables

1. Determine the molecular formula of an oxide of iron in which the mass of iron and oxygen are 69.9% and 30% respectively given that the molar mass of the oxide 159.898/mol, find the empirical and molecular formula.

2. a crystalline salt when heated becomes anhydrous and loses 51.2% of its weight the anhydrous salt analysis gave the percent composition as magnesium is equal to 20.0% and sulphur is equal to 26.66% and oxygen is equal to 53.33%.

3. In three moles of Ethane calculate the following
1. calculate number of carbon atoms.
2. number of moles of hydrogen atoms
3. number of molecules of Ethane.​

Answers

1a. The empirical formula of the compound is Fe₂O₃

1b. The molecular formula of the compound is Fe₂O₃

2a. The molecular formula of the anhydrous salt is MgSO₄

2b. The formula of the crystalline salt is MgSO₄.7H₂O

3i. The number of mole of carbon atoms in the compound is 6 moles

3ii. The number of mole of hydrogen atoms in the compound is 18 moles

3iii. The number of molecules in 3 moles of ethane is 1.806×10²⁴ molecules

1a. How to determine the empirical formulaFe = 69.9%O = 30%Empirical formula =?

Divide by their molar mass

Fe = 69.9 / 56 = 1.248

O = 30 / 16 = 1.875

Divide by the smallest

Fe = 1.248 / 1.248 = 1

O = 1.875 / 1.248 = 3/2

Multiply by 2 to express in whole number

Fe = 1 × 2 = 2

O = 3/2 × 2 = 3

Thus, the empirical formula of the compound is Fe₂O₃

1b. How to determine the molecular formulaEmpirical formula = Fe₂O₃Molar mass of compound = 159.89 g/molMolecular formula = ?

Molecular formula = empirical × n = molar mass

[Fe₂O₃]n = 159.89

[(56×2) + (16×3)]n = 159.89

160n = 159.89

n = 159.89 / 160

n = 1

Molecular formula = [Fe₂O₃]n

Molecular formula = [Fe₂O₃] × 1

Molecular formula = Fe₂O₃

2a. How to determine the molecual formula of the anhydrous salt

We'll begin by calculating the empirical formula

Mg = 20.0% S = 26.66% O = 53.33%Empirical formula =?

Divide by their molar mass

Mg = 20.0 / 24 = 0.83

S = 26.66 / 32 = 0.83

O = 53.33 / 16 = 3.33

Divide by the smallest

Mg = 0.83 / 0.83 = 1

S = 0.83 / 0.83 = 1

O = 3.33 / 0.83 = 4

Thus, the empirical formula of the anhydrous salt is MgSO₄

The molecular formula of the anhydrous salt can be obtained as follow:

Empirical formula = MgSO₄Molar mass of compound = 120 g/molMolecular formula = ?

Molecular formula = empirical × n = molar mass

[MgSO₄]n = 120

[24 + 32 + (16×4)]n = 159.89

120n = 120

n = 120 / 120

n = 1

Molecular formula = [MgSO₄]n

Molecular formula = [MgSO₄] × 1

Molecular formula = MgSO₄

2b. How to determine the formula of the crystalline saltWater (H₂O) = 51.2%Anhydrous salt (MgSO₄) = 100 - 51.2 = 48.8%Formula of crystalline salt =?

Divide by their molar mass

MgSO₄ = 48.8 / 120 = 0.4

H₂O = 51.2 / 18 = 2.8

Divide by the smallest

MgSO₄ = 0.4 / 0.4 = 1

H₂O = 2.8 / 0.4 = 7

Thus, the formula of the crystalline salt is MgSO₄.7H₂O

3i. How to determine the mole of carbon atoms in 3 moles of C₂H₆

1 mole of C₂H₆ contains 2 moles of carbon atoms.

Therefore,

3 moles of C₂H₆ will contain = 3 × 2 = 6 moles of carbon atoms

3ii. How to determine the mole of hydrogen atoms in 3 moles of C₂H₆

1 mole of C₂H₆ contains 6 moles of hydrogen atoms.

Therefore,

3 moles of C₂H₆ will contain = 3 × 6 = 18 moles of hydrogen atoms

3iii. How to determine the number of molecules

From Avogadro's hypothesis,

1 mole of ethane = 6.02×10²³ molecules

Therefore,

3 moles of ethane = 3 × 6.02×10²³ molecules

3 moles of ethane = 1.806×10² molecules

Learn more about empirical formula:

https://brainly.com/question/24297883

Learn more about Avogadro's number:

https://brainly.com/question/26141731

#SPJ1

Complete question

2. A crystalline salt when heated becomes anhydrous and loses 51.2% of its weight the anhydrous salt analysis gave the percent composition as magnesium is equal to 20.0% and sulphur is equal to 26.66% and oxygen is equal to 53.33%. Ccalculate the molecular formula of the anhydrous and the crystalline salt. The molecular weight of the anhydrous salt is 120

Predict the nature of the indicated
covalent bond.
H
H
polar
H-C
H
-C-H
H
non-poiar

Answers

Answer:

Non-polar

Explanation:

Non-polar bonds occur when the electrons in a covalent bond are equally shared between the two atoms.

The indicated bond is most likely non-polar because the two atoms are identical (both carbons). In addition, these two carbons are balanced (their other bonds are identical). This means there is no reason for the electrons in the bond to be pulled in any particular direction.

Which compound has the lowest melting point?

CaCl2


K2Cr2O7

C6H12O6

K2O

Answers

Answer:

[tex]K2O[/tex]

Explanation:

If you use a melting point periodic table there is a listing of all the elements and their melting point.

Potassium (K) has a melting point of 63.25 degrees Celsius and oxygen (O) has a melting point of -218 degrees Celsius. Therefore, if you add those two values up

[tex](63.25x2)+-218 = -91.5 Degrees Celsius[/tex]

All the other compounds do not reach negatives.

Which of the following can easily form an ionic bond with a cation?
Sr
Ne
NH4+
PO43–

Answers

PO43- can form an ionic bond with a cation.

The chemical species which can easily form an ionic bond with a cation will be.

The definition of an ionic bond is a chemical bond that is formed between two ions that have opposite charges.

An Ionic bond is formed when one atom gives up one or more electrons to another atom.

These bonds can easily form between a pair of atoms or between molecules. This kind of bonding is most widely seen in bonds present in salts.

Compared to other options given,  is the best option as the total number of 32 valence electrons, is the highest among the given choices. Its tendency to form ionic bonds with the other cation is much higher as compared to others.

P has 5 electrons which combine with 4 O atoms which have 6 lone pairs and a -3 charge on it, which means it is accepting 3 electrons so it will be (+3), so total valence electrons will be 5 + 6 (4) + 3 = 32.

For detailed study about cation refer given link https://brainly.com/question/14309645.

#SPJ1.

How many sucrose molecules are in 3.0 moles of sucrose?

Answers

Answer: No of molecule of sucrose = 1.806 X 10^24

Explanation:

No. of molecules = No. of moles X NA

No. of molecule of sucrose = 3 moles X 6.02 X 10^23

No of molecule of sucrose =18.06 X 10^23

No of molecule of sucrose =1.806 X 10^24

Answer:

1.80 × 10²⁴ Molecules of Sucrose

N analyst prepared a sucrose solution by weighing 1kg of water and add 1.5kg sucrose.estimate the concentration of the resultant solution in (i) mass percent (ii) degree brix

Answers

The concentration of the solution in mass percent is 60%.

What is the mass percent?

The concentration of a substance can be expressed in mass percent. This refers to the percentage of the solute that is contained in the solution.

Thus we can write;

Mass percent = Mass of solute/ Mass of solution * 100/1

Mass percent = 1.5kg/1.5kg + 1 Kg * 100/1

Mass percent =  60%

Hence, the concentration of the solution in mass percent is 60%.

Learn more about mass percent:https://brainly.com/question/5394922

#SPJ1

Determine the mass, in grams, of 0.350 moles of s (1 mol of s has a mass of 32.07 g).

Answers

Answer:

11.22 gm

Explanation:

32.07 gm / mole * .350 mole = 11.22 gm

The mass of 0.350 moles of Sulphur is equal to 11.22 g.

What is a mole?

A mole is a standard unit which is used to calculate the huge number of quantities of atoms, molecules, ions, or other particular particles. The mass of the one mole of any element is called atomic mass and that of any compound is called molar mass.

The number of units present in one mole was found to be equal to 6.023 × 10 ²³ which is known as Avogadro’s constant or Avogadro’s number.

Given, the number of moles of sulphur = 0.350 moles

The mass of one mole of sulphur = 32.07 g

Then, the mass of 0.350 moles of Sulphur = 0.350 × 32.07

The mass of 0.350 moles of Sulphur (S) = 11.22 g

Therefore, 11.22 grams is the mass of 0.350 moles of Sulphur (S).

Learn more about the mole, here:

brainly.com/question/26416088

#SPJ2

HELP PLEASE!!!!!


2. To test for the presence of substance X, a lab assistant,
Alex, treats a sample of the material with hydrochloric acid.
Bubbles of carbon dioxide gas are observed and collected
during the test reaction. Write a balanced chemical equation
for the reaction.

3. Another lab assistant, Jess, disagrees with Alex, and treats
a sample of substance X with sodium hydroxide. One of the
products of this reaction is a compound called milk of lime
(found to be only slightly soluble in water). Write a balanced
chemical equation and identify the type of reaction taking
place.

4. Which lab assistant is performing a valid test for substance
X? Explain your answer, including a prediction of what would
be observed during a positive test. HINT: Research what is the
valid test for substance X. At this point you should know the
identity of substance X (you found it in Question #1).
62%

Answers

(2.) A lab assistant Alex test for the presence of X, the balanced chemical equation is CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O. (3.) Another lab assistant perform the test, the balanced chemical equation is CaCO₃ + 2NaOH → Ca(OH)₂ + Na₂CO₃. (4.) The Substance X is Calcium carbonate.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

(2.) To test for the presence of substance X, a lab assistant, Alex, treats a sample of the material with hydrochloric acid. Bubbles of carbon dioxide gas are observed and collected during the test reaction.

The balanced chemical equation is

CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O

(3.) Another lab assistant, Jess, disagrees with Alex, and treats a sample of substance X with sodium hydroxide. One of the products of this reaction is a compound called milk of lime (found to be only slightly soluble in water).

The balanced chemical equation is

CaCO₃ + 2NaOH Ca(OH)₂ + Na₂CO₃

The type of reaction is Double displacement reaction

(4.) The lab assistant Alex perform the valid test for substance X because it gives effervescence of bubbles. The substance X is calcium carbonate. When calcium carbonate react with dilute HCl then carbon dioxide gas bubbles is present in it.

Thus from the above conclusion we can say that  (2.) A lab assistant Alex test for the presence of X, the balanced chemical equation is CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O. (3.) Another lab assistant perform the test, the balanced chemical equation is CaCO₃ + 2NaOH → Ca(OH)₂ + Na₂CO₃. (4.) The Substance X is Calcium carbonate.

Learn more about the Balanced chemical equation here: https://brainly.com/question/26694427

#SPJ1

A short chain of monomer liquid not long enough to be considered a polymer is called a(n)?

a. methacrylate
b. acrylate
c. urethane
d. oligomer

Answers

Answer:

d. oligomer it is the correct answer also if you would just search that up it pops up

Other Questions
Preble Company manufactures one product. Its variable manufacturing overhead is applied to production based on direct labor-hours and its standard cost card per unit is as follows:Direct materials: 5 pounds at $9 per pound$45Direct labor: 3 hours at $14 per hour42Variable overhead: 3 hours at $8 per hour24Total standard cost per unit$111The planning budget for March was based on producing and selling 28,000 units. However, during March the company actually produced and sold 34,000 units and incurred the following costs:a.Purchased 180,000 pounds of raw materials at a cost of $8.50 per pound. All of this material was used in production.b.Direct laborers worked 69,000 hours at a rate of $15 per hour.c.Total variable manufacturing overhead for the month was $565,200. Cultures are not dynamic and rarely respond to changes in both the social and physical environments in which they are embedded.TrueFalse During a typical launch, a space shuttle goes from a vertical speed of 5.75 m/s at t =1.20 s to a vertical speed of 6.90 m/s at t = 1.60 s. Determine the acceleration during thisphase of the launch. (2.9 m/s) if a country has highr ates of fertility and mortality, which transition period use a 2-year moving average to calculate forecasts for the years 1992-2002. (Must use formulas in excel) Managing Employee Benefits: Social Security and Retirement Planning at Taylor Foods (pages 221-22)As Gavin Jackson leaves the monthly professional luncheon for human resource executives in his area, he starts to consider how the information he learned will affect his company, Taylor Foods. The program speaker provided an update on the Social Security system and how challenges in financing the system may affect organizations. As the director of human resources at this large food-processing and distribution company, Gavin must plan the retirement benefits for the organizations employees. Gavin had been aware that the Social Security system is in trouble, but now has some clear ideas about how it will affect both the retirement benefits offered by Taylor Foods and the retirement plans of its employees.Gavin learned that the current Social Security system is unstable and that the future of benefits to be provided is uncertain. , the Old Age, Survivor, and Disability Insurance (OASDI), which provides retirement benefit payments to retired workers, is under a strain. Retirement benefits comprise most of, many of the payments made by the Social Security system, and the instability of the system suggests that current workers may not be able to rely on the Social Security system as it exists today to support them in retirement. Gavin knows that this information affects the retirement benefit planning at Taylor Foods.The speaker also noted that employees retiring in the relatively near future may base their retirement decisions to some extent on the Social Security benefits available to them. While employees may receive their retirement benefits from Social Security starting at age 62, the amount is reduced if they havent reached the full retirement age, which is determined based on year of birth. For example, the age for full retirement is 67 for anyone born in 1960 or later. Further, the system contains other incentives to encourage individuals to delay retirement. This is important to Taylor Foods, as the age at which employees plan to retire affects the companys human resource planning process. Annually, Gavin creates staffing plans that include estimates for turnover of employees, and employee retirements are included in those estimates. This information, coupled with a current downturn in the economy, leads Gavin to believe that Taylor Foods may experience a lower level of turnover as employees delay retirement.Gavin is considering both issues as he considers retirement benefits, as well as staffing planning at Taylor Foods. While the company currently offers a competitive retirement plan, he knows that he needs to reexamine the benefits in the context of his new under- standing of the Social Security system. He also needs to consider how employees planning to delay retirement will affect the organization and the human resource planning process.how does the instability of the social security system affect retirement benefit planning at taylor foods? For what reasons did many researchers assume that protein was the genetic material? Analyze the map below and answer the questions that follow.A topographical map of the Eastern Mediterranean. Bodies of water are labeled A, B, C, D, and E. A is between Turkey and Ukraine. B is between Greece and Turkey. C extends from Lebanon and Syria to Italy and Northern Africa. D is a small strip of water between Egypt and the Sinai Peninsula. E is between Egypt and Saudi Arabia.Image courtesy of NASAWhat is the name of the body of water located at Letter D on the map above?A.The Gulf of SuezB.The Black SeaC.The Aegean SeaD.The Mediterranean Sea which instrument of trade policy has been in use the longest? Calcit produces a line of inexpensive pocket calculators. One model, IT53, is a solar powered scientific model with a liquid crystal display (LCD). Each calculator requires four solar cells, 40 buttons, one LCD display, and one main processor. All parts are ordered from outside suppliers, but final assembly is done by Calclt. The processors must be in stock three weeks before the anticipated completion date of a batch of calculators to allow enough time to set the processor in the casing, connect the appropriate wiring, and allow the setting paste to dry. The buttons must be in stock two weeks in advance and are set by hand into the calculators. The LCD displays and the solar cells are ordered from the same supplier and need to be in stock one week in advance. Based on firm orders that CalcIt has obtained, the master production schedule for IT53 for a 10-week period starting at week 8 is given by Week 8 9 10 11 12 13 14 15 16 17 MPS 1.200 1.200 800 1.000 1.000 300 2.200 1.400 1.800 600 Determine the gross requirements schedule for the solar cells, the buttons, the LCD display, and the main processor chips. the design of a square rug for your living room is shown. you want the area of the inner square to be 25% of the total area of the rug. find the side length x of the inner square how have humans effected climate change? children need to be praised for their process and effort in order to develop both grit A survey of 1026 people were asked about what they would do with an unexpected cash gift. Forty-seven percent responded that they would pay off debts. a. Construct the 95% confidence interval for the population proportion of people who would pay off debts with an unexpected cash gift (Round Intermediate calculations to at least 4 decimal places. Round z value and final answer to 3 decimal places.) Confidence interval to Which of the following is FALSE about a range name created in one worksheet?a. It can be used in the same worksheet in the same workbookb. It can be used in a different worksheet in the same workbookc. It can be used as an absolute valued. It can be used as a relative value Using budget data, what was the total expected cost per Unit if all manufacturing and shipping overhead (both variable and fixed) were allocated to planned production? What was the actual cost per unit of production and shipping? (See above calculations.) Budget Actual Unit Variable Cost $202.06 Unit Fixed Cost $3.65 Cost per Unit $205.71 true/false. the internal vulnerability assessment is usually performed against every device that is exposed to the internet, using every possible penetration testing approach. The Black Codes passed in a number of southern states after the Civil War were intended to A close public schools to the children of former slaves 00 promote the return of former slaves to Africa enable Black citizens to vote in federal elections D place limits on the socioeconomic opportunities open to Black people E further the integration of southern society the amount of revenue that is foregone from an alternative use of cash is called a.differential profit b.opportunity cost c.sunk cost d.differential revenue A buffer solution with pH around 9 may contain which of the following? a. Hydrochloric acid b. Acetic acid c. Sodium hydroxide d. ammonia