Please help : ) and please explain in answer

A tiny amount of weak hydrochloric acid is mixed with a quantity of marble chips (CaCO3), to decrease the rate of reaction we do decreasing the surface area of the marble chips, decreasing conc. HCL and many more.

Several ways are:-

1. Decreasing the surface area of the marble chips: By breaking the marble chips into smaller pieces, the surface area that is available for the acid to react with is reduced, slowing down the reaction.

2. Decreasing the concentration of the hydrochloric acid: By using a less concentrated solution of hydrochloric acid, the number of acid molecules available to react with the marble chips is reduced, slowing down the reaction.

3. Increasing the temperature: By performing the reaction at a lower temperature, the kinetic energy of the acid and marble chip molecules is reduced, slowing down the rate of collision between them, which slows down the reaction.

4. Using a catalyst: Addition of a catalyst to the reaction can change the reaction mechanism and decrease the activation energy needed for the reaction to occur, thus slowing down the reaction.

5. Using an inhibitor: An inhibitor is a substance that slows down the reaction by binding to the enzyme or catalytic site and preventing the substrate from binding.

It's important to note that these methods may also affect the overall yield of the reaction, so it's essential to use the appropriate method(s) for the specific experiment and goals.

To know more about hydrochloric acid please refer: https://brainly.com/question/14006357

#SPJ4

Answer:

Explanation:

chlorine

Chlorine must lose 7 electrons to attain the electronic configuration of Neon and this state is precarious in the case of chlorine which is an electronegative element

Pressure inside a helium balloon: The helium atoms expand and press on the surface of the balloon.

Helium balloons are a type of balloon filled with helium gas. Helium is a light, non-flammable, inert gas that is found in abundance in the atmosphere and is used to inflate balloons. Helium balloons are often used in decorations, promotions, special events, parties, and displays. They come in a variety of shapes, sizes, and colors, and can be filled with helium and released into the atmosphere, creating a festive atmosphere. Helium balloons are also used in scientific experiments, such as measuring wind speeds, studying atmospheric pressure and air movement, and measuring the temperature of the atmosphere.

To learn more about helium balloon
https://brainly.com/question/29311706
#SPJ1

The number of moles must be equal, the ratio of the molarity of each must be equal to the ratio of the volumes used.

An experiment is a procedure or set of procedures used to test a hypothesis or explore a cause and effect relationship. It is a scientific method of investigation in which the investigator manipulates one or more independent variables and measures the subsequent effect on one or more dependent variables. Experiments are conducted to answer questions, test theories, and gain insight into cause-and-effect relationships.

The molarity of the HNO 3 solution can be calculated using the equation:
Molarity of HNO3 = (volume of HNO3 * molarity of Ba(OH)2) / volume of Ba(OH)2
Molarity of HNO3 = (14.5 mL * 1.75 x 10^-2 M) / 12.5 mL
Molarity of HNO3 = 1.4 x 10^-2 M
This equation works because the number of moles of HNO3 neutralized by the Ba(OH)2 must be equal to the number of moles of Ba(OH)2 used. The number of moles of each can be determined by multiplying the molarity of each by the volume used, and since the number of moles must be equal

To learn more about experiment
https://brainly.com/question/26150306
#SPJ4

The final temperature of the mixture when no heat loss to the surroundings is equal to 69.57 °C

The specific heat capacity can be defined as the amount of heat required to increase the temperature in 1 unit of substance by 1° Celcius.

The specific heat capacity can be expressed in the form of the mentioned formula below:

Q = mSΔT

The specific heat capacity of the water, S = 4.184 J/g°C

The heat lost by water = heat gained by the ice

Heat lost by water = heat gained by the ice + heat increased by the water

m₁S₁ (T₂ - T₁) = m₂L + m₂S₂ (T₂ - T₁)

103.5 × 4.18 × (73- T) = 13.1  × (2.03) + 5 × 4.18 × (T-0)

31582 - 432.63 T = 26.59 + 20.9 T

453.53 T = 31555

T = 69.57 °C

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

Moving down the concentration gradient means that materials move from an area of high concentration of the material to an area of low concentration of the material.

In chemistry, concentration is the amount of a substance in a given space. Another way to describe concentration is the proportion of the solute to a solvent or entire solution. In general, mass/unit volume is used to express concentration. Instead of using volume, concentration can be stated as a mass per unit. Although concentration is typically used to describe chemical solutions, it may be computed for any mixture.

This can be seen in osmosis, where water moves from a higher concentration of solute to a lower concentration of solute.

To learn more about concentration

https://brainly.com/question/26255204

#SPJ4

Aspartame, C14H18N2O5, has a molar mass of 294.307 grams/mol. As a result, the molecular weight of aspartame (C14H18N2O5) is equal to the molecular weights of 14 carbon atoms, 18 hydrogen atoms, 2, nitrogen atoms, and 5, oxygen atoms. As a result, aspartame (C14H18N2O5) has a molecular weight of 294.307 g/mol.

You can quickly determine the molar mass of aspartame if you have a periodic table nearby (C14H18N2O5), because combining the molar masses of the constituent atoms yields the molar mass of any molecule (or compound). Aspartic acid is known by the IUPAC name 2-Aminobutanoic acid, and its chemical formula is HOOCCH (NH 2) CH 2 COOH.

Learn more about aspartame here:

https://brainly.com/question/9352908

#SPJ4

Answer:

The reaction rate in mol/sec is 0.005.

Explanation:

To determine the reaction rate in mol/sec, you need to first determine the number of moles of H₂ gas produced in the reaction. The volume of a gas at STP (standard temperature and pressure) is directly proportional to the number of moles of the gas, so you can use the volume of H₂ gas produced to calculate the number of moles.

At STP, 1 mole of a gas occupies a volume of 22.4 L. Therefore, the number of moles of H₂ gas produced in the reaction can be calculated as follows:

moles H₂ = 4.48 L / 22.4 L/mol = 0.2 mol

To determine the reaction rate in mol/sec, you need to divide the number of moles of H₂ gas produced by the time it took for the reaction to occur:

reaction rate (mol/sec) = 0.2 mol / 40 sec = 0.005 mol/sec

So, the reaction rate in mol/sec is 0.005.

3.4 mole of H₂SO₄ are needed to react completely with 6.8 moles of lithium hydroxide (LiOH).

When breathed in, lithium hydroxide monohydrate can have an impact on you. Lithium Hydroxide Monohydrate is a HIGHLY CORROSIVE CHEMICAL, and contact with it can cause serious skin irritation, eye damage, and burning. Lithium Hydroxide Monohydrate inhaled can irritate the throat and nose.

From the stichiometry of the reaction: 2 LiOH + H2SO4 → Li2SO4 + 2H2O

It is evident that 2.0 moles of LiOH reacts with 1.0 mole of H2SO4 to produce 1.0 mole of Li2SO4 and 2.0 moles of H2O.

Using cross multiplication:

1.0 mole of H2SO4 reacts completely with → 2.0 moles of LiOH

x mole of H2SO4 are needed to react completely with → 6.8 moles of LiOH

since number of moles of H2SO4 = ( 1.0 x 6.8 ) / (2.0) = 3.4 mole of H2SO4.

To know more about lithium hydroxide visit:

brainly.com/question/2528161

#SPJ1

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option C.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

The statement "atoms have a small, dense nucleus" is true.  A few alpha particles shot at gold foil bounce in the opposite direction is the evidence.

Therefore, the correct option is option C.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ1

The molecular formula for this compound is C4H8 that can be calculated from its empirical formula.

The empirical formula of a chemical compound is the simplest whole number ratio of atoms present in a compound. The compound is made up of only carbon and hydrogen atoms thus it is known as hydrocarbon. The percentage of carbon is 86%, therefore the percentage of hydrogen is 14%.

The molecular mass of the compound is given i.e., 56.104 grams.

Moles of C= 86 g * 1 mol/12 g =7 moles

Moles of H=14 g* 1 mol/1 g= 14 moles

Thus, the mole ratio of C:H can be given as:

Moles of C/ Moles of H= 7/14=1/2

Thus, the empirical formula is CH2 while its molecular formula is C4H8.

To learn more about molecular formula check the link below:

https://brainly.com/question/26388921

#SPJ4

The Lucas Test is used to detect the presence of a primary alcohol.

When the test is positive, the mixture of the primary alcohol with the Lucas reagent changes from a clear and colourless characteristic to a turbid, cloudy, and hazy characteristic. This visual change is due to the reaction of the primary alcohol with the Lucas reagent which is a mixture of concentrated hydrochloric acid and zinc chloride.

The Lucas Test is used to detect the presence of a primary alcohol, and when a positive result is obtained, the reaction of the primary alcohol with the Lucas reagent, a mixture of hydrochloric acid and zinc chloride, causes the visual change from a clear and colourless characteristic to a turbid, cloudy, and hazy one.

learn more about lucas test here

https://brainly.com/question/14687410

#SPJ4

The freezing point of the solution after you add an additional 1.34 g is -0.808°C.

A solution's freezing point is lower than the pure solvent's freezing point. This means that for freezing to happen, a solution needs to be cooled to a lower temperature than the pure solvent.

We use the equation: to determine the mass of the solution

Density = mass/volume

1.05 g/ml = mass/ 50ml

mass = 1.05×50

mass = 52.5g.

Percentage of magnesium chloride in the solution is 1.52%

Mass of magnesium chloride in the solution = 1.52 % of 52.5 g

Mass of magnesium chloride in the solution = 1.52/100×52.5

Mass of magnesium chloride in the solution = 0.798g

The following equation is used to determine depression in freezing point:

ΔTf = Freezing point of pure solution - Freezing point of solution

ΔTf = i Kf m

Freezing point of pure solution - Freezing point of solution = i Kf m

m =  m solute × 100/M solute × W solvent

Given values,

Freezing point of pure solution (water) is 0°C

i is Vant hoff factor = 2.5

Kf molal freezing point elevation constant = 1.86°C/m

m solute given mass of solute (magnesium chloride) = [0.798 + 1.34] g

m solute = 2.138 g

M solute molar mass of solute (magnesium chloride) = 95.2 g/mol

W solvent mass of solvent (water) = [52.5 - 0.798] g = 51.702 g

substitute the given values,

0 - Freezing point of solution = 1×1.86×2.138×1000/95.2×51.702

Freezing point of solution = -0.808°C.

To know more about freezing point visit:

https://brainly.com/question/14825265

#SPJ4

Complete question is " A 50 mL solution is initially 1.52% MgCl₂ by mass and has a density of 1.05 g/ml

What is the freezing point of the solution after you add an additional 1.34 g MgCl₂? (Use i = 2.5 for MgCl₂)."

The amount of atomic particles released by a radioactive material in a specific time is  determined by strong and weak nuclear forces option- 1 is correct.

Radioactive materials fall under the category of radionuclides, which are chemicals with unstable atomic nuclei. They adjust the nucleus to stabilize themselves (spontaneous fission, emission of alpha particles, or conversion of neutrons to protons or the reverse).

The amount of atomic particles released by a radioactive material over a given period of time depends on how quickly it decays.

The weak nuclear forces that exist between the nucleons of atomic particles control how quickly radioactive materials decay over time.

The nuclear forces can therefore be used to calculate the total number of atomic particles that a radioactive material releases in a given period of time (strong or weak).

To know more about radioactivity visit:

https://brainly.com/question/7180704

#SPJ4

After solving the equation the car's kinetic energy is 783,500 kg m2/s2.

Kinetic energy is the energy of motion, or the energy associated with an object or system due to its motion. It is a form of energy that can be converted into other forms of energy, such as thermal energy, sound energy, electrical energy, and so on.

The car's kinetic energy is the energy it has due to its motion. Kinetic energy is calculated as KE = 1/2mv2, where m is mass and v is velocity. In this case, the car has a mass of 2,050 kg and is traveling at 28 meters per second. Plugging these values into the equation gives:
KE = 1/2(2050 kg)(28 m/s)2
= 1/2(2050 kg)(784 m2/s2)
= 783500 kg m2/s2
Therefore, the car's kinetic energy is 783,500 kg m2/s2.

To learn more about kinetic energy
https://brainly.com/question/26520543
#SPJ1

Hazardous materials are substances or chemicals that pose a health hazard, a physical hazard, or harm to the environment.

To learn more about hazardous materials refers to:

brainly.com/question/27318175

#SPJ1

The classical elements or seven elements in nature are plants, warm energy, soil, mineral, water, cold energy, and air.

Living organisms incorporate distinctly massive quantities of oxygen, carbon, hydrogen, nitrogen, and sulfur (those 5 factors are called the majority factors), together with sodium, magnesium, potassium, calcium, chlorine, and phosphorus (those six factors are called microminerals). From the smallest atom to a massive whale to the sun machine itself, all matters are stated to be composed of a few aggregate of those elements. Halogens belong to group 17, and they acquire only one electron in order to attain stable electronic configuration.

To learn more about elements check the link below:

https://brainly.com/question/28376204

#SPJ4

When a liquid changes to a gas, the molecules in the room gain enough energy to break the bonds that hold them together in the liquid state.

What are Molecules?

Molecules are the smallest unit of matter that still has the properties of a particular substance. They are made up of two or more atoms that are bonded together. Molecules can be covalent, meaning the atoms in the molecule share electrons, or ionic, meaning one atom has donated electrons to the other.

This energy comes from an increase in temperature, which causes the molecules to move faster and farther apart. As the molecules move around and expand, they fill the room with a vapor or gas.

To know more about molecules,

https://brainly.com/question/26044300

#SPJ4

It is critical to develop a PheDH with specificity and high activity since it is crucial for the manufacture of chiral pharmacological intermediates and the detection of phenylketonuria.

Here, a PheDH gene, pdh, was discovered that encodes a novel BhPheDH with 61.0% similarity to the previously identified PheDH from Microbacterium sp. In comparison to the PheDH from Nocardia sp., the BhPheDH demonstrated superior stability in hot environments (40–70°C) and optimal activity at 60°C and pH 7.0. Additionally, sodium salt has the potential to greatly boost both its activity and thermostability. The residual activity of the BhPheDH was found to be 1.8-fold higher than that of the control group following incubation for 2 hours in 3 M NaCl at 60 °C (without NaCl).

Learn more about Optimal here-

https://brainly.com/question/26866930

#SPJ4

The smallest measurement you can make on the meter stick using the metric scale is the millimeter.

The millimeter is the smallest measurement on the meter stick . The millimeter is the smallest reading in the meter stick. we use the meter stick to simply measure the length. The meter reading is calibrated in the centimeters in the meter scale. the least count in the meter scale is the millimeters. we can measure the things as the length of the table or the width.

Thus, the smallest measurement in the meter stick using the meter scale is the millimeters. the symbol of the millimeters is mm.

To learn more about meter stick here

https://brainly.com/question/17687457

#SPJ4

The empirical formula of the compound is C2N3H2.

What is an Empirical formula?

An empirical formula is a type of chemical formula that shows the simplest ratio of atoms in a molecule, rather than the total number of atoms. It is the simplest possible chemical formula that shows the relative numbers of each type of atom in a molecule.

This formula is determined by dividing the mass of each element by its atomic weight, and then dividing the result by the lowest of the results. The lowest result is 0.817 g/mol for carbon. This means that 2.61 g of carbon is equivalent to 3.17 moles of carbon. Thus, the ratio of elements in the compound is 3.17 moles of carbon, 7.44 moles of nitrogen, and 1.6 moles of hydrogen. Dividing each of these numbers by the lowest number (3.17) gives the ratio of 2 for carbon, 2.35 for nitrogen, and 0.5 for hydrogen. This ratio is simplified to 2:2:1, which corresponds to the empirical formula C2N3H2.

To know more about empirical formula,

https://brainly.com/question/13058832

#SPJ4

As with any laboratory work, adequate facility design, operation, and monitoring, as well as excellent work practices, are necessary to protect laboratory staff against the hazard.

Both degrees of protection are based on the principle of ALARA (as little as reasonably possible) exposure. Electricity Risks By adopting adequate measures, the electrocution dangers of electrically powered instruments, tools, and other equipment are nearly completely minimized, therefore their use in the hazard need not represent a serious risk. You need the correct sort of scales if you want to weigh laboratory samples accurately. To accurately weigh the lab samples, for instance, you may use an analytical balance. The reliability of the weighing device will determine how accurate and precise the findings are.

To learn more about laboratory please click on below link

https://brainly.com/question/14428286

#SPJ4

Enzyme Inhibitors bind to an enzyme to turn it off, thus preventing it from catalyzing a reaction.

An enzyme is a biological molecule that catalyzes chemical reactions in the cell. Enzymes work by lowering the activation energy required for a reaction to occur, making it more likely that the reaction will proceed. However, enzymes can also be inhibited, which means that their activity is reduced or stopped completely. This can happen for a variety of reasons, such as the presence of a specific molecule called an inhibitor.

Some inhibitors bind to the active site of the enzyme, preventing the substrate from binding and thus preventing the reaction from occurring. Other inhibitors bind to other parts of the enzyme, causing a conformational change that prevents the enzyme from working. Still, other inhibitors bind to enzymes and alter their activity by non-covalent interactions.

There are different types of inhibitors like competitive inhibitors bind to the active site of an enzyme and prevent substrate binding. Non-competitive inhibitors bind to a different site on the enzyme, causing a conformational change that makes the enzyme less active. Feedback inhibitors bind to the end product of a metabolic pathway, inhibiting the enzyme that catalyzes the first step of the pathway.

To know more about  Enzyme Inhibitors  click below:

https://brainly.com/question/17320375#

#SPJ4

If 1.70g of aniline reacts with the 2.10 g of bromine, the theoretical yield of 4-bromoaniline is 2.25 g.

1 mole mole of the aniline react with the 1 mol of Br₂ produces 1 mole of the 4 - bromoaniline.

mass of aniline = 1.70 g

molar mass of aniline = 93 g/mol

moles of aniline = 0.0182 mol

mass of Br₂ = 2.10 g

molar mass of Br₂ = 160 g/mol

moles = 2.10/ 160

         =  0.0131 mol

Br₂ is limiting reagent .

moles of 4-bromoaniline =  0.0131

mass of 4-bromoaniline = moles × molar mass

                                        = 0.0131 × 172

                                         = 2.25 g

Thus, the theoretical yield is 2.25 g.

To learn more about theoretical yield here

https://brainly.com/question/11022817

#SPJ4

The vapor pressure of water at its boiling point 100°C is 1 atm. Then the pressure at 117°C is 1.17 atm and the temperature of water at a pressure of 2.85 atm is 285°C.

Boiling point of a substance is the temperature at which it converts from liquid state to vapor state. At this temperature the vapor pressure of water vapor is equal to the atmospheric pressure that is 1 atm .

The temperature-pressure relation is written as:

P1 /T1 = P2/ T2

Now, the pressure inside the cooker at a temperature of 117°C is calculated as:

(1 atm × 117 °C) / 100 °C = 1.17 atm.

Thus, pressure at 117 °C is 1.17 atm. Then, If the pressure is 2.85 atm, then the temperature of water inside the pressure cooker is calculated as:

(2.85 atm × 117 °C) / 1.17 = 285 °C

Therefore, the temperature at 2.85 atm is 285 °C.

Find more on boiling point:

https://brainly.com/question/2153588

#SPJ1

Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory is 109.5°.

Germanium tetrachloride has an odd, acidic smell and is a colorless, fuming liquid. It is a necessary step in the creation of pure germanium metal. GeCl4 has seen a significant rise in utilization recently as a result of its employment as a reagent in the creation of fiber optics. GeO2 (germanium dioxide) may be immediately converted into germanium tetrachloride by dissolving the oxide in strong hydrochloric acid. To purify and remove the germanium tetrachloride from other products and contaminants, the resultant liquid is fractionally distilled. Rehydrolyzing the GeCl4 with deionized water will yield pure GeO2, which may then be reduced with hydrogen to get germanium metal.

complete question:Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory

109.5°

90°

120°

180°

< 109.5°

>109.5°

<120°

>120°

learn more about Germanium Refer:brainly.com/question/23745589

#SPJ4

Irony is a mismatch between what is expected and what actually occurs. These literary methods aid in the creation of dramatic effects in writing.

Irony is a disconnect between what is expected to happen and what actually happens. These types of literary devices help in creating a dramatic effect in literature.

Irony is a literary device which was used extensively in Greek tragedy. It involves expressing the meaning of something by making use of words which technically mean the opposite of the original thing being conveyed.

Irony is used for a dramatic or humorous effect.  There are three types of irony seen in literature as follows:

• Verbal Irony  

• Situational Irony  

• Dramatic Irony  

Verbal irony involves the usage of different words to mean something dissimilar to what they look like they actually mean.  

Situational Irony means that what happens is totally different from what was expected to be happening.

Dramatic Irony occurs in plays, etc. where the audience or the readers are more aware of what is actually going on as compared to the character in the scene.

Learn more about irony here:

https://brainly.com/question/13428382

#SPJ4

There is one sigma as well as one pi bond in a double bond.

Sigma bonds and pi bonds are the two types of covalent bonds. Sigma bonds are formed when there is an end-to-end overlapping of the atomic orbitals. A pi bond is formed when there is a lateral or a side-by-side overlapping of the atomic orbitals.

The sigma bonds are represented by a "σ" symbol and pi bonds are represented by "π" symbol. One sigma bond is there in a single bond. A double bond contains one sigma as well as one pi bond. A triple bond has one sigma as well as two pi bonds.

--The given question is incomplete, the complete question is

"List the number of sigma bonds and pi bonds in a double bond. Group of answer choices 2 sigma, 0 pi 1 sigma, 2 pi 1 sigma, 1 pi 2 sigma, 3pi, 1pi 1 sigma."--

To know more about sigma bonds here

https://brainly.com/question/13818226

#SPJ4

The number of moles of Ag that forms from 5.0 moles of Zn is 10 moles.

The number of moles of a substance can be calculated stoichiometrically as follows;

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, silver nitrate reacts with zinc to produce silver and zinc nitrate as follows:

2AgNO₃ + Zn → 2Ag + Zn(NO₃)₂

Based on the equation above, 1 mole of Zn produces 2 moles of silver.

Hence, 5 moles of Zn will produce 10 moles of Ag.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1