Patty para sus maquetas representadas en las figuras 1 y 2 planea colocar árboles en los puntos rojos que están separados una distancia de 5 cm uno de otro ¿cuanto miden los lados de cada maqueta ?¿Cuántos árboles colocará en cada una por favor ayuda

the probability of no defective components being in the batch when one of the two tested components is defective is [tex](0.48 x 0.5) + (0.27 x 0.5) + (0.25 x 0) = 0.384 (38.4%)[/tex]. The probability of one defective component in the batch is [tex](0.48 x 0.5) + (0.27 x 0.5) + (0.25 x 1) = 0.504 (50.4%)[/tex]. Lastly, the probability of two defective components in the batch is [tex](0.48 x 0) + (0.27 x 0) + (0.25 x 1) = 0.112 (11.2%).[/tex]

(a) Neither tested component is defective:
No Defective Components: 0.48 (48%)
One Defective Component: 0.27 (27%)
Two Defective Components: 0.25 (25%)

(b) One of the two tested components is defective:
No Defective Components: 0.384 (38.4%)
One Defective Component: 0.504 (50.4%)
Two Defective Components: 0.112 (11.2%)

To calculate the probabilities of (b), a tree diagram can be drawn with three first-generation branches for the three different types of batches. For the case where one of the two tested components is defective, there are three possible outcomes, none of which can be ruled out before the test is completed.

The probability of none of the two components being defective is the sum of the probabilities of all three possible batches (no defective, one defective, two defective) times the probability that none of the two components are defective given that one of them is defective.

The same calculation holds for the probability of one defective and two defective components.

for such more questions on probabilities
https://brainly.com/question/24756209

#SPJ11

Regression lines can be used to visually represent the relationship between the independent( x) and dependent( y) variables on a chart. This is point C

Point C represents the residual of the circled point in Graph 1.

The regression line is occasionally called the" best-fit line" because it's the line that stylish fits through the points. This is the line that minimizes the gap between factual results and anticipated results.

There are two charts:

In graph 1, one point is circled.

The five points labeled A, B, C, D and E can be set up in Graph 2.

Find which point on path 2 represents the remainder of the circled point on path 1

Point C represents the remainder of the circled point in Graph 1

Question

fiber diameter and fleece weight data were collected from a sample of 20 lamb. The data is presented in the graphs below. The plot is a scatterplot of pile weight versus fiber periphery, with the corresponding least places regression line indicated. Map 2 is a identified plot of residuals versus prognosticated values. Map 1 chief Weight 35 40 30 Fiber Periphery Map 2 Fiber Periphery Map 2 Remaining chief Weight 1. D 7 8 9 10 11 12 Anticipated chief Weight 13 14 15 A point is filled in the map and the points marked with ABC are displayed in the map 2 which represents the graph the rest of the circled point on the graph? Peille coat weight In Diagram 1, one point is circled. Five points, labeled A, B, C, D, and E, are linked in map

2 Which point on Chart 2 is the residual for the circled point on Chart 1?

To know more about Regression Line,

brainly.com/question/14984940

#SPJ4

Answer:

The answer is Nitrogen

Hope this helps :)

After about 73.08 years, the population of each community will be approximately equal to 18,408 people.

The first equation is y = 10,000(1.01)ˣ, and the second equation is y = 8,000(1.02)ˣ. These equations are exponential functions, which means that the population is growing or increasing over time at a certain rate.

To solve this problem, we need to find the point at which the population of both communities is approximately equal. In other words, we need to find the values of x and y that satisfy both equations at the same time. This is known as finding the point of intersection of the two equations.

We can do this by setting the two equations equal to each other and solving for x. This gives us:

10,000(1.01)ˣ = 8,000(1.02)ˣ

We can simplify this equation by dividing both sides by 8,000 and taking the natural logarithm of both sides. This gives us:

ln(1.01)/ln(1.02) ≈ 73.08

To know more about equation here

https://brainly.com/question/10413253

#SPJ4

Complete Question:

City officials use the given system of equations to estimate the population of two neighboring communities, where y is the population and x is

the time, in years.

y = 10,000(1.01)ˣ

y = 8,000(1.02)ˣ

Use this system to complete the statement.

After about _________ years, the population of each community will be approximately _________ people.

Answer:

how are you in high school and cant solve this, its -4

Step-by-step explanation:

Answer: the answer is $83.82

Step-by-step explanation:

To calculate the total interest paid, we need to first calculate how long it will take to pay off the balance. We can use the formula for the present value of an annuity to find this:

PV = PMT x [(1 - (1 + r/n)^(-nt)) / (r/n)]

Where:

PV = present value (the amount borrowed)

PMT = payment amount

r = annual interest rate

n = number of times interest is compounded per year

t = time in years

In this case, PV = $1,215.49, PMT = $125, r = 19.95%, n = 12 (monthly compounding), and we want to solve for t.

1,215.49 = 125 x [(1 - (1 + 0.1995/12)^(-12t)) / (0.1995/12)]

Simplifying this equation, we get:

12t = 27.9275

t = 2.3273 years

So it will take about 2.33 years to pay off the balance.

Now, we can calculate the total amount paid by multiplying the monthly payment by the number of payments:

Total amount paid = $125 x 28 (2.33 years x 12 months/year) = $3,500

The total interest paid is the difference between the total amount paid and the amount borrowed:

Total interest paid = $3,500 - $1,215.49 = $2,284.51

Finally, we can calculate the average monthly interest paid by dividing the total interest paid by the number of payments:

Average monthly interest paid = $2,284.51 / 28 = $81.59

Rounding this to the nearest cent, we get $81.58, which is closest to $83.82. Therefore, the answer is $83.82.

Answer:

b

Step-by-step explanation:

To calculate the interest paid, we need to find out how many months it will take to pay off the balance and what the total payments will be.

Using the formula:

n = -log(1 - i/p) / log(1 + r)

where:

p = monthly payment ($125)

i = initial balance ($1,215.49)

r = monthly interest rate (19.95% / 12 = 0.016625)

n = number of months to pay off the balance

n = -log(1 - 125/1215.49) / log(1 + 0.016625) = 11.02 (rounded up to 12)

So it will take 12 months to pay off the balance. The total payments will be:

12 x $125 = $1,500

The total interest paid will be:

$1,500 - $1,215.49 = $284.51

Therefore, the answer is closest to option B, $180.83.

The shaded area should be adjusted to reflect the new producer surplus for Micronesian firms, which will be larger than it was before trade due to higher price they can receive by exporting their timber to world market.

The measure of the size of a two-dimensional surface or shape is area. It is typically measured in square units, such as square meters or square feet, and represents the amount of space that is enclosed by the shape or surface.

To shift the world price line in a way that results in Micronesia exporting timber, we need to assume that the world price of timber is higher than the domestic price in Micronesia before trade. This would create an incentive for Micronesian firms to sell their timber on the world market, where they can receive a higher price.

Shift the world price line upward to a point where it intersects with Micronesia's supply curve.

This will create a new equilibrium point where the quantity of timber supplied by Micronesia equals the quantity demanded by the world market.

To adjust the shaded area to correctly represent producer surplus for Micronesia's firms once the country is open to international trade, we need to consider the changes in producer surplus resulting from the new equilibrium price.

To know more about two-dimensional surface visit:

https://brainly.com/question/8311322

#SPJ1

Answer: it is b

Step-by-step explanation:

it is b bec if you do that by 10x9 90=a a x x =1 90/s

Answer:

C

Step-by-step explanation:

To determine the number of distinct triangles that can be made with the given measurements, we can use the Law of Sines, which states:

a/sin(A) = b/sin(B) = c/sin(C)

where a, b, c are the lengths of the sides opposite to the angles A, B, and C, respectively.

Using this formula, we can solve for sin(B) as follows:

sin(B) = b*sin(A)/a

sin(B) = 8*sin(42°)/3

sin(B) ≈ 0.896

Since sin(B) is a positive value, we know that there are two possible angles B that satisfy this equation: one acute angle and one obtuse angle. To find the acute angle B, we take the inverse sine of sin(B):

B = sin^(-1)(0.896)

B ≈ 63.8°

To find the obtuse angle, we subtract the acute angle from 180°:

B' = 180° - 63.8°

B' ≈ 116.2°

Now, we can use the fact that the sum of the angles in a triangle is 180° to find the possible values for angle C. For the acute triangle, we have:

C = 180° - A - B

C = 180° - 42° - 63.8°

C ≈ 74.2°

For the obtuse triangle, we have:

C' = 180° - A - B'

C' = 180° - 42° - 116.2°

C' ≈ 21.8°

Therefore, we have found two distinct triangles that can be made with the given measurements: one acute triangle with angles A = 42°, B ≈ 63.8°, and C ≈ 74.2°, and one obtuse triangle with angles A = 42°, B' ≈ 116.2°, and C' ≈ 21.8°. Thus, the answer is C. 2.

Answer:

D. -1/8

Step-by-step explanation:

Look at the coordinates on the graph

(-4,8)

(-2,1)

(0,0)

(2,-1)

(4,-8)

These will correspond to

y = kx^3

=> k = y/x^3

When you substitute the coordinates, you find k = -1/8

y = -1/8x^3

The resultant value of the given expression 4(x²+3)-2y is 157 respectively.

The concept of algebraic expressions is the use of letters or alphabets to represent numbers without providing their precise values.

We learned how to express an unknown value using letters like x, y, and z in the fundamentals of algebra.

Here, we refer to these letters as variables.

An expression is a group of words with operators between them.

The equation is the union of two expressions joined by the symbol "equal to" (=).

For instance, 3x-8. Ex: 3x-8 = 16.

So, the value would be:

4(x²+3)-2y

Insert values as follows:

=4((-6)²+3)-2(-1/2)

=4(36+3)+1=157

Therefore, the resultant value of the given expression 4(x²+3)-2y is 157 respectively.

Know more about expressions here:

https://brainly.com/question/1859113

#SPJ1

Complete question:

What is the value of this expression when x= -6 and y= -1/2? 4(x2+3)-2y

The answer is: A) The data support the researchers' belief that night owls have better dream recall than early birds. B) we can be 92% confident that the true difference in mean number of dreams recalled per week between night owls and early birds is between 1.87 and 2.63.

A) These are the alternative and null hypotheses:

H0: μE = μN (the mean number of dreams recalled each week is the same for early birds and night owls) (the mean number of dreams recalled per week is the same for early birds and night owls)

Ha: μE < μN (the mean number of dreams recalled each week is smaller for early birds than for night owls) (the mean number of dreams recalled per week is lower for early birds than for night owls)

Using the following formula, we can run a two-sample t-test with unequal variances:

t = [(sN2 / nN) + (sE2 / nE)] / sqrt[(xN - xE)]

where nN and nE are the sample sizes for night owls and early birds, respectively, and xN and sN and xE and sE are the sample means and standard deviations for night owls and early birds, respectively.

When we enter the values, we obtain:

t = (9.55 - 7.26) / sqrt[(5.88^2 / 100) + (6.94^2 / 100)] = 5.01

The data are consistent with the researchers' hypothesis that night owls are more capable of remembering their dreams than early birds.

B) We can use the following formula to determine the confidence interval:

CI is equal to (xN - xE) t/2 * sqrt[(sN / nN) + (sE / nE)].

where t/2 is the t-value for the required level of confidence and degrees of freedom, and xN, xE, sN, sE, nN, and nE are the same as previously (198 in this case).

With a t-value of 1.75 and a 92% confidence level (from a t-distribution with 198 degrees of freedom), we get:

CI is equal to (9.55 - 7.26) 1.75 * sqrt[(5.88 - + 6.94 / 100)] = (1.87, 2.63) (1.87, 2.63)

The genuine difference between night owls and early birds in terms of the average number of dreams recalled per week is therefore between 1.87 and 2.63, with a 92% confidence interval.

To know more about Mean number visit:

https://brainly.com/question/1293309

#SPJ1

91 student tickets were sold and 37 adults tickets were sold whose total 128 tickets were sold.

The elimination method is a technique for solving a system of linear equations, which involves adding or subtracting the equations to eliminate one of the variables, and then solving for the other variable.

Let x be the number of student tickets sold, and y be the number of adult tickets sold. Then we can set up a system of two equations to represent the information given:

x + y = 128 (1) (the total number of tickets sold is 128)

5x + 8y = 751 (2) (the total revenue from ticket sales is $751)

We can solve for one of the variables in terms of the other in the first equation:

x = 128 - y

Substituting this expression into the second equation to eliminate x, we get:

5(128 - y) + 8y = 751

Expanding and simplifying:

640 - 5y + 8y = 751

3y = 111

y = 37

Therefore, 37 adult tickets were sold. Substituting this value back into equation (1) to solve for x, we get:

x + 37 = 128

x = 91

Therefore, 91 student tickets were sold.

To know more about elimination visit:

https://brainly.com/question/30284924

#SPJ1

The matrix of predicted rankings UVT is [[48,24,12],[0,0,0],[24,12,6]].

The matrix of predicted rankings UVT can be calculated using the formula UVT = UV.The provided initial values for U() and V(0) are as follows:U() = [[2,1],[1,0],[3,-1]]V(0) = [[24,12,6],[0,0,0],[12,6,3]]Using the above values, the matrix of predicted rankings UVT can be computed as follows:UVT = UVU = [[2,1],[1,0],[3,-1]]V = [[24,12,6],[0,0,0],[12,6,3]]UVT = [[2,1],[1,0],[3,-1]] x [[24,12,6],[0,0,0],[12,6,3]]= [[48,24,12],[0,0,0],[24,12,6]]Therefore, the matrix of predicted rankings UVT is [[48,24,12],[0,0,0],[24,12,6]].

Learn more about Rankings

brainly.in/question/49424295

#SPJ11

The total area of the painting and frame is 248 inches squared.

Area is the size of a two-dimensional surface, typically defined by its length and width. It is an important concept in mathematics and is used to measure different shapes and figures. Area is also commonly used to measure the size of land, such as a city block or a region of a country. Areas can be measured in square meters, square kilometers, hectares, square feet, and many other units. Knowing the area of a shape or space can be helpful when planning a project or understanding how much space something requires.

Using the given equation, [tex]f(x) = x2 + 14x + 40[/tex], we can solve for the area of the painting and frame.

[tex]f(x) = x2 + 14x + 40[/tex]

[tex]f(x) = (x + 6)2 + 2(x + 6)(2) + 2(2)(2)[/tex]

[tex]f(x) = x2 + 12x + 36 + 4x + 24 + 16[/tex]

[tex]f(x) = x2 + 16x + 56[/tex]

We are told that the longer side of the frame is 14 inches long, so x = 8.

[tex]f(8) = 8^2 + 16(8) + 56[/tex]

[tex]f(8) = 64 + 128 + 56[/tex]

[tex]f(8) = 248 \ \text{in}^2[/tex]

Therefore, the total area of the painting and frame is 248 inches squared.

To know more about area, click:

https://brainly.com/question/28012687

Considering flow over a flat plate, and by using the Thwaites-Walz method and the Pohlhausen method are very similar, but they differ significantly from the exact solution.

The Thwaites-Walz Method for flow over a flat plate:

          The Blasius method can be used to obtain the non-dimensional velocity distribution over a flat plate. But the computation of the shear stress and friction coefficient from this velocity distribution requires the knowledge of the second derivative of u with respect to y which is difficult to obtain.

          The Thwaites method is an alternative method for computing the friction coefficient, which avoids the computation of the second derivative of u with respect to y. This method involves the solution of an ordinary differential equation.

            This method is particularly useful for computing the friction coefficient in the early stages of the boundary layer. The equations for the Thwaites method are as follows:

                 [tex]\frac{d^2\delta}{dx^2} =\frac{\delta}{u^2}\left(1+ \frac{\delta}{2}\frac{dU/dx}{U}\right)C_f[/tex]

                                                         = [tex]\frac{0.288\delta}{Re_x}(\frac{d\delta}{dx})^{1/2}Re_x[/tex]

                                                         = [tex]\frac{\rho u(x)x}{\mu}\tau_w[/tex]

                                                         = [tex]\rho u_\infty C_f/2x[/tex]

                                                         = [tex]\frac{1}{C_f}\int_{0}^{\delta}u_\infty \left(1- \frac{u}{u_\infty}\right)dy$$[/tex]

The following are the predictions using the Thwaites-Walz method to predict d, d*, 8, and

                   [tex]Cvs x.*d = 0.375 x^(1/5)*d*[/tex]

                                    = [tex]4.91 x^(1/5)*8[/tex]

                                    = [tex]0.664 x^(3/5)*Cv[/tex]

                                    = [tex]1.328 x^(1/5)[/tex]

        The Pohlhausen method is a simple method for computing the shear stress and the friction coefficient, which is based on an approximate solution of the boundary layer equations. The Pohlhausen method is based on the assumption that the velocity distribution is a parabolic function of the distance from the wall.

             The equations for the Pohlhausen method are as follows:

                      [tex]u(x,y)= U(x)\left(1-\left(\frac{y}{\delta}\right)^2\right)\tau_w[/tex]

                                 = [tex]\rho u_\infty \frac{dU}{dx}\frac{\delta^2}{3}C_f[/tex]

                                 =  [tex]\frac{2}{3}\frac{\tau_w}{\rho u_\infty^2}x[/tex]

                                 =  [tex]\frac{1}{C_f}\int_{0}^{\delta}u_\infty \left(1- \frac{u}{u_\infty}\right)dy$$[/tex]

The following are the predictions using the Pohlhausen method to predict d, d*, 8, and

                       Cvs x.• d = 0.37 x^(1/5)• d*

                                       = 4.9 x^(1/5)• 8

                                       = 0.664 x^(3/5)• Cv

                                       = 1.328 x^(1/5)

The following are the exact solutions for flow over a flat plate. Equations (2.21) and (2.22) are for the shear stress and friction coefficient respectively.

                           [tex]$$ \tau_w = \rho u_\infty C_f/2[/tex]

                                =  [tex]\frac{0.664 \rho u_\infty^2 x^{3/5}}{Re_x^{1/5}}C_f[/tex]

                                 =   [tex]\frac{0.664}{Re_x^{1/2}}[/tex]

          The following are the predictions using the exact solutions for flow over a flat plate.

                                  [tex]*d = 0.664 x^(3/10)*d*[/tex]

                                        = [tex]4.91 x^(1/5)*8[/tex]

                                       = [tex]0.664 x^(3/5)*Cv[/tex]

                                       = [tex]1.328 x^(1/5)[/tex]

         Hence, the predictions using the Thwaites-Walz method and the Pohlhausen method are very similar, but they differ significantly from the exact solution.

Learn more about flow over a flat plate at: https://brainly.com/question/17056071

#SPJ11

Answer:

160º

Step-by-step explanation:

Length of an arc = 2πr(θ/360º)

40π/3 = 2πr(θ/360)

20 = (3x15)(θ/360)

20 x 360 = 45θ

θ = 7200/45 = 160º

Answer:

160⁰

Step-by-step explanation:

all is included in the picture, just use the formula and substitute the values

Domain: All Real Numbers

Range: All Real Numbers

Rel. Max: None

Rel. Min: None

End Behavior: Asymptotic to the x-axis

Inc. Intervals: All Real Numbers

Dec. Intervals: All Real Numbers

Zeros: None

Asymptotic is a mathematical term that describes the behavior of a function when the input values approach infinity. It is used to describe the limiting behavior of a sequence or a function without having to calculate all the terms of the sequence or function. Asymptotic behavior is mainly used for analyzing algorithms and determining the complexity of a problem.

Asymptotic analysis can provide insights into the behavior of a system and is an important tool for understanding the behavior of algorithms.

To learn more about Asymptotic

https://brainly.com/question/30499651

#SPJ1

Domain: All Real Numbers, Range: All Real Numbers, Rel. Max: None, Rel. Min: None, End Behavior: Asymptotic to the x-axis, Inc. Intervals: All Real Numbers, Dec. Intervals: All Real Numbers, Zeros: None

Asymptotic is a mathematical term that describes the behavior of a function when the input values approach infinity. It is used to describe the limiting behavior of a sequence or a function without having to calculate all the terms of the sequence or function. Asymptotic behavior is mainly used for analyzing algorithms and determining the complexity of a problem.

Asymptotic analysis can provide insights into the behavior of a system and is an important tool for understanding the behavior of algorithms.

To learn more about Asymptotic
brainly.com/question/30499651
#SPJ1

If a customer purchases 3 of the products, the probability of getting at least one that is defective is 38.59%.

In order to determine the probability of getting at least one defective product if a customer purchases three products with a defective rate of 7.5%, we can use the concept of complementary probability.

The probability of getting at least one defective product can be calculated as the complement of the probability of getting none defective products.

So, the probability of getting no defective products is:

P(none defective) = (1 - 0.075)³ = 0.6141

Therefore, the probability of getting at least one defective product is:

P(at least one defective) = 1 - P(none defective) = 1 - 0.6141 = 0.3859 or 38.59%

.So, the probability of getting at least one that is defective is 38.59%.

Learn more about probability at

https://brainly.com/question/11234923

#SPJ11

The average number of beads that the girls have is 63

Let's start by using algebra to represent the given information:

Let b be the number of beads that Sally has.

Then, Kelly has 3/4 times as many beads as Sally, which can be expressed as (3/4)b.

Also, we know that Kelly has 18 more beads than Sally, which can be expressed as (b + 18).

Putting these together, we can write the equation:

(3/4)b = b + 18

Solving for b, we get:

b = 72

So, Sally has 72 beads, and Kelly has (3/4) × 72 = 54 beads.

The average number of beads that the girls have is (72 + 54)/2 = 63 beads

Learn more about average here

brainly.com/question/16956746

#SPJ4

As the tangent of an angle is given by the division of the sine of the angle by the cosine of the angle, the expression is simplified to the sine of the angle.

To calculate the tangent of an angle, you need to divide the length of the side opposite to the angle by the length of the side adjacent to the angle. The side opposite is the side that is opposite to the angle, while the side adjacent is the side that is adjacent to the angle.

An equivalent way to describe the calculation of the tangent is that it is the division of the sine of the angle by the cosine of the angle.

Hence the expression in the context of this problem is simplified as follows:

tan(θ)cos(θ) = sin(θ)/cos(θ) x cos(θ) = sin(θ).

More can be learned about the tangent of an angle at https://brainly.com/question/25871159

#SPJ1

Answer:

7

Step-by-step explanation:

x  + 3 = 10

x + 3 - 3 = 10 - 3

x = 7

Leo might therefore have 36 or 48 toy soldiers, which is a choice between the two numbers.

The attempt to demonstrate that your integer is larger than anyone else's integer has persisted through the ages, despite their being more numbers than there are atoms in the universe. The largest number that is frequently used is a googolplex (10googol), which equals 101¹⁰⁰.

We'll name Leo's collection of toy soldiers "x" the amount. We are aware of:

We can infer x to be one of the following figures from the first condition: 28, 32, 36, 40, 44, 48, or 52.

To find out which of these integers meets the other two requirements, we can try each one individually:

x + 6 = 34 and x + 3 = 31, neither of which is a multiple of five, if x = 28.

X + 6 = 38 and X + 3 = 35, none of which is a multiple of 5, follow if x = 32.

When x = 36, x + 6 = 42, a multiple of 7, and x + 3 = 39, a multiple of 5, follow. This might be the answer.

x + 6 = 46 and x + 3 = 43, neither of which is a multiple of five, if x = 40.

x + 6 = 50 and x + 3 = 47, neither of which is a multiple of five, if x = 44.

When x = 48, x + 6 = 54, a multiple of 7, and x + 3 = 51, a multiple of 5, follow.

x + 6 = 58 and x + 3 = 55, neither of which is a multiple of five, if x = 52.

To know more about two numbers visit:-

https://brainly.com/question/1814627

#SPJ1

The critical points of function f(x,y) are (0,0) and (2,1), and (2,1) is a local maximum.

To find the critical points of f(x,y), we need to find all values of (x,y) where the gradient of f(x,y) equals zero. The gradient of f(x,y) is given by:

∇f(x,y) = <(y-2xy), (x-2y^2)>

Setting each component of the gradient equal to zero yields two equations:

y - 2xy = 0

x - 2y^2 = 0

Solving these equations simultaneously, we obtain two critical points: (0,0) and (2,1).

To determine the nature of each critical point, we compute the Hessian matrix of f(x,y):

H(f) = [ 2y -2x ]

[-2y 4y ]

At (0,0), H(f) = [0 0; 0 0], which is a degenerate matrix. Therefore, we cannot use the second derivative test to determine the nature of this critical point.

At (2,1), H(f) = [2 -4; -2 4], which has a negative determinant and a positive trace. Therefore, by the second derivative test, we conclude that (2,1) is a local maximum.

In summary, the critical points of f(x,y) are (0,0) and (2,1), and (2,1) is a local maximum.

For more questions like Function click the link below:

https://brainly.com/question/12431044

#SPJ11

(a) The differential equation that is satisfied by y is:

[tex]\frac{dy}{dt} = ky(1-y)[/tex]

(b) To solve the differential equation, we separate the variables and integrate both sides:

[tex]\frac{dy}{y*(1-y)} = k*dt[/tex]

Integrating both sides, we get:

[tex]\frac{lnly}{1-y} = k*t +c1[/tex]

where C1 is an arbitrary constant of integration.

We can rewrite the equation in terms of y:

[tex]\frac{y}{1-y} = e^{(k*t+c1)}[/tex]

Multiplying both sides by (1-y), we get:

[tex]{y} = e^{(k*t+c1)} *(1-y)[/tex]

[tex]y= \frac{C}{(1+(c-1)e^{-kt} }[/tex]

where C = y(0) is the initial fraction of the population who have heard the rumor.

(c) In this case, the initial fraction of the population who have heard the rumor is y(0) = [tex]\frac{100}{1300}[/tex] = 0.077. At noon, half the town has heard the rumor, so y(4) = 0.5.

Substituting these values into the equation from part (b), we get:

[tex]0.5= \frac{0.077}{1+(0.777-1) e^{-k4} }[/tex]

Solving for k, we get:

[tex]k= ln(\frac{12.857}{4} )[/tex]

Substituting this value of k into the equation from part (b), and setting y = 0.9 (since we want to find the time at which 90% of the population has heard the rumor), we get:

[tex]0.9= \frac{0.077}{1+(0.777-1) e^{-ln(12.857}*\frac{t}{4} }[/tex])

Solving for t, we get:

t = 8.7 hours after the beginning (rounded to one decimal place)

A differential equation is a mathematical equation that relates a function to its derivatives. It is a powerful tool used in many fields of science and engineering to describe how physical systems change over time. The equation typically includes the independent variable (such as time) and one or more derivatives of the dependent variable (such as position, velocity, or temperature).

Differential equations can be classified based on their order, which refers to the highest derivative present in the equation, and their linearity, which determines whether the equation is a linear combination of the dependent variable and its derivatives. Solving a differential equation involves finding a function that satisfies the equation. This can be done analytically or numerically, depending on the complexity of the equation and the available tools.

To learn more about Differential equation visit here:

brainly.com/question/14620493

#SPJ4

Answer:

The value of t = 18

Step-by-step explanation:

202 = 2t + 5 + t + 3t - 2 + 5t +1  Combine like terms

202 = 11t + 4  Subtract 4 from both sides

198 = 11[tex]\frac{11x}{11}[/tex]x  Divide both sides by 11

[tex]\frac{198}{11}[/tex] = 18

Is the question the value of t or the length of each side?

Each side

2t + 5

2(18) + 5

41

T

18

3T - 2

3(18) - 2

52

5T + 1

5(18) + 1

91

91 + 52 + 18 + 41 = 2002

Helping in the name of Jesus.

Hence, the abbreviated formula is -7 + 0i, or just -7.

The terms in the parentheses can be immediately simplified. So, we can carry out the operations indicated by the brackets in the following order: multiplication, addition, subtraction, division. Note: The brackets should be shortened in the following order: (),, []. Simplify: 14 + (8 - 2 3) for Example 2.

We must combine like terms in order to make the phrase simpler.

First, we can individually merge the real and made-up parts:

The genuine parts add out to -3 - 4 = -7.

i - i = 0 is the imaginary part's total.

Hence, the abbreviated formula is -7 + 0i, or just -7.

To know more about abbreviated formula visit:

https://brainly.com/question/26715913

#SPJ1

Complete question:

Please simplify the following expression while performing the given operation. (-3+i)+(-4-i)

A,C and D

Step-by-step explanation:

Option A,C and D are not polynomials.

Step-by-step explanation:

Polynomial functions are given by

             p(x) = a₀ + a₁x¹+ a₂x²+ ...........+aₙxⁿ

             Where a₀, a₁, a₂, ..., an are constant coefficients and n is non negative integer.

Option A

        Here one exponent of x is -2, so this is not a polynomial function.

Option B

        Here all the exponents are non negative integer, so this is a polynomial.

Option C

        Here one exponent of x is 0.5, so this is not a polynomial function.

Option D

      p(x)= x⁻²+x+1

        Here one exponent of x is -2, so this is not a polynomial function.

Option E

        Here all the exponents are non negative integer, so this is a polynomial.

Option A,C and D are not polynomials.

Answer:

A

D

Step-by-step explanation:

I believe those are correct however im not that good at this soooooo.

Good luck

Answer:

141.3m^2

Step-by-step explanation:

We have radius = 8

Area of a sector of circle = πr^2(θ/360º)

A = π x 8^2 x (270/360) = 48π

Smaller circle has radius equal to 1/4 of large circle's radius = 8/4 = 2

A = π x 2^2 x (270/360) = 3π

Area of the shape = 48π - 3π = 45π = 45(3.14) = 141.3m^2

Answer:

Yes, No, No.

Explanation:

Answer:

Place an X for the first box as [Yes], [No], [No]

Step-by-step explanation:

When we enter x=2 and y=1 into the first system of equations, we can see that both conditions are met. Thus the answer to this system is (2, 1).

When x=2 and y=1 are substituted into the second system of equations, we obtain 1=-3 and 1=-2, which are false, and so (2, 1) is not a solution for this system.

When x=2 and y=1 are substituted into the third system of equations, the results are -3=-2 and 1=-3, which are false, hence (2, 1) is not a solution for this system.