Answer:
2.5 m/s²
Explanation:
Using the formula, v = u + at ( v = Final velocity; u = Initial velocity; t = Time; a = Acceleration)
25 = 0 + 10a
a = 25/10 = 2.5 m/s²
What is the current in a circuit that has a power of 200 W and a resistance of 150 Ω
Answer:
Current = 1.15 AExplanation:
Since we are finding the current
Power in a circuit can be found by using the formula
[tex]P = I ^{2} R[/tex]Where
I is the current
R is the resistance
P is the power
From the question
Power = 200 W
Resistance = 150 Ω
Substitute the values into the above formula and solve for the current
That's
[tex]200 = 150{I}^{2} [/tex]Divide both sides by 150
We have
[tex] {I}^{2} = \frac{200}{150} \\ = \frac{4}{3} [/tex]Find the square root of both sides
We have
[tex]I = \sqrt{ \frac{4}{3} } [/tex]= 1.154700
We have the final answer as
Current = 1.15 A
Hope this helps you
Study the interaction of the light rays with the mediums. Classify the medium in each image as being transparent or opaque.
Answer:
a) transparent
b) transparent
c) opaque
Explanation:
In the first one, the light rays go completely through, so it is transparent.
The second one I'm not too sure about. It is refraction so it's going through a different material, but the fact that it went through makes me say transparent.
Last one, the light rays are reflecting off the surface so it's opaque.
Please feel free to correct me if I'm wrong. This is just my understanding
A pie is cooked in an oven at 200 °C. The aluminium film that ckvered the pie can be touched soon after it is removed while the pie is still dangerously hot. Explain this?
Answer and Explanation:
The aluminum is more productive in the absorption and heat transfer to other particles. It instantly converts heat absorbed from the environment into the atmosphere when removed from the oven, enabling us to operate with it faster than the pie that takes much longer to convert heat to the environment.
So this is the reason for pie to be the dangerously hot
A statistical analysis used to examine the influence of one variable on another is
Answer: the correlation coefficien
Explanation:
Regression and correlation analysis are statistical techniques used extensively in physical geography to examine causal relationships between variables. ... Utilization of correlation analysis on dependent and independent variables produces a statistic called the correlation coefficient
Answer:the right answer is regression
Explanation:
I just took my test and correlation was wrong the correct answer is b regression
Friends tell you that on a recent trip their average velocity was +20 m/s. Is it possible that at any time during the trip their velocity was -20 m/s? Explain
Answer:
Yes , it is possible .
Explanation:
Suppose they travelled from A to B , a distance of 800 m at a velocity of
40m /s and then come back on the same path covering a distance of 200 m at the rate of 20/ s .In other words their velocity in their return journey was -20m /s .
Net displacement = 600 m
Total time taken = (800 / 40) + (200 / 20)
= 20 + 10 = 30 s
Average velocity = net displacement / total time
= 600 / 30 = 20 m /s .
Hence average velocity of 20 m /s is possible .
A woman dropped a dime in a wishing well , she heard it 30 sec later ..Find velocity on impact while moving at 9.8 m/s 2
Answer:
The velocity at impact is 222.2 m/s
Explanation:
The given information are;
The time at which the woman heard the sound of the coin after dropping it into the wishing well = 30 seconds
The average speed of sound in air = 344 m/s
The time in which the dime travel = t₁
The time in which the sound travel = t₂
1/2 × 9.8 × t₁² = 344 × t₂
t₁ + t₂ = 30
4.9·t₁² = 344 × (30 - t₁)
4.9·t₁² + 344·t₁ - 10320 = 0
Which gives -344±
[tex]t_1 = \dfrac{-344\pm \sqrt{344^{2}-4\times 4.9 \times 10320}}{2\times 4.9}[/tex]
t₁ = 22.676 seconds or -92.9 seconds
Therefore the correct natural time is t₁ = 22.676 seconds
The velocity at impact, v = g×t₁ = 9.8 × 22.676 = 222.2 m/s
The velocity at impact= 222.2 m/s.
4) A football player starts at the 40-yard line, and runs to the 25-yard line in 2 seconds.
a) What is their speed during that run?
b) What is their velocity?
I
c) If they kept running at that velocity for another 1.3 seconds, what would their
final position be?
Answer:
(a). Their speed during that run is 10 m/s.
(b). Their velocity is 6.86 m/s
(c). The final position is at 8.91 m.
Explanation:
Given that,
A football player starts at the 40-yard line, and runs to the 25-yard line in 2 seconds.
Suppose, the distance between 40 yard line and 25 yard line is 20 yard.
(a). We need to calculate their speed during that run
Using formula of speed
[tex]v=\dfrac{d}{t}[/tex]
Where. d = distance
t = time
Put the value into the formula
[tex]v=\dfrac{18.288}{2}[/tex]
[tex]v=10\ m/s[/tex]during that run
(b). We need to calculate their velocity
Using formula of speed
[tex]v=\dfrac{\Delta d}{\Delta t}[/tex]
Put the value into the formula
[tex]v=\dfrac{22.86-36.58}{2}[/tex]
[tex]v=-6.86\ m/s[/tex]
Negative sign shows the direction of motion.
(c). If they kept running at that velocity for another 1.3 seconds,
We need to calculate the final position
Using formula of position
[tex]d=vt[/tex]
Put the value into the formula
[tex]d=6.86\times1.3[/tex]
[tex]d=8.91\ m[/tex]
Hence, (a). Their speed during that run is 10 m/s.
(b). Their velocity is 6.86 m/s
(c). The final position is at 8.91 m.
A certain part of a flat screen TV has a thickness of 150 nm how many meters is this
Answer:
[tex]1.5\,\,10^{-7}\,\,m= 0.00000015\,\,m[/tex]
Explanation:
The prefix nano means [tex]10^{-9}[/tex], therefore:
[tex]150 \,\,nm = 150\,\,10^{-9}\,m=1.5\,\,10^{-7}\,\,m= 0.00000015\,\,m[/tex]
A cell membrane has a thickness of about 7 nm. How many cell membranes would it take to make a stack 3.4 in high?
Answer:
486 of cell membranes
Explanation:
one cell membrane has 7*10^-9m as the height
So, by dividing 3.4 with 7*10^-9 you will get the number of cell require to form the height.
3.4/(7*10^-9)=485.71
because we can't have decimal number of cell we would round it into three significant figures, 486.
What problems would we have if Pascal had failed to give the Pascal's law? Write some points.
Answer:
Pascal's law states that a change in pressure at any point in an enclosed fluid is transmitted equally throughout the fluid.
Explanation:
Applications of Pascal's law include
>The hidden standard of the water powered jack and pressure driven press.
>Power intensification in the slowing mechanism of most engine vehicles.
>Utilized in artesian wells, water pinnacles, and dams.
>Scuba jumpers must comprehend this rule. At a profundity of 10 meters submerged, pressure is double the environmental weight adrift level, and increments by around 100 kPa for each expansion of 10 m depth.[5]
>Generally Pascal's standard is applied to bound space (static flow), however because of the consistent flow process, Pascal's rule can be applied to the lift oil instrument (which can be represented as a U tube with pistons on either end).
Without Pascal's law, none of the above could be possible.
How much time does it take for a car with a speed of 85 m/s to drive a distance of 200 m? (1 point)
The car will take 2.35 seconds to drive a distance of 200 m.
What is speed?
Speed is a physical quantity that is a measure of the rate of change in the position of an object. It is the rate of change of distance with respect to time. Speed is a scalar quantity and is expressed as the magnitude of velocity, which is the rate and direction of motion of an object. Speed is measured in meters per second (m/s).
To find the time it takes for the car to drive a distance of 200 m with a speed of 85 m/s, we can use the formula:
time = distance / speed
Plugging in the values given, we get:
time = 200 m / 85 m/s
Simplifying this expression, we get:
time = 2.35 s
Therefore, it takes 2.35 seconds for the car to drive a distance of 200 m with a speed of 85 m/s.
To learn more about speed the link
https://brainly.com/question/28224010
#SPJ1
A car is traveling 35 mph on a smooth surface. If a balanced force is applied to the car, what happens?
Answer:
Here is the answer.
Explanation:
Balanced forces- they are those forces that produce 0 resultant forces.
therefore, on applying a balanced force on the object, it wouldn't result in any change, as resultant force would be 0.
If a man travels from 0m to 5m then back to -3m, all in four seconds, what is the mans displacement?
Answer:
-3 m
Explanation:
Displacement is the final position minus the initial position.
Δx = x − x₀
Δx = -3 m − 0 m
Δx = -3 m
Two balls are released from the same height on the moon. They both reach the ground at the same time. Which statement is correct about the two balls
Answer:
same acceleration
Explanation:
A toy car, released from the table top, is at the
half-way mark along the ramp to the floor below.
☆
Тар
Kinetic Energy
Gravitational Potential Energy
Both of these
None of these
Answer:
Gravitational Potential Energy
Explanation:
A toy car, released from the table top, is at the half-way mark along the ramp to the floor below will be experiencing Gravitational Potential Energy. Thus, the correct option is B.
What is Gravitational Potential Energy?Gravitational energy is also known as the gravitational potential energy. It is the potential energy which a massive object has in relation to another massive object due to gravitational force. It is the potential energy which is associated with the gravitational field, and is released when the objects fall towards each other from a certain height.
When something has a high position, then its gravitational potential energy is high. For example, a book which is placed on a high bookshelf has a higher potential energy than a book which is placed on the bottom shelf because it has farther to fall.
Therefore, the correct option is B.
Learn more about Gravitational Potential Energy here:
https://brainly.com/question/19768887
#SPJ1
Jaune moves North 15 meters, South 5 meters, then North 8 meters. How far is Jaune DISPLACED?
Answer:
Displacement = 7 meters
Explanation:
Given that,
Jaune moves North 15 meters, South 5 meters, then North 8 meters. We need to find the displacement of Jaune.
The attached figure shows the motion of Jaune.
We know that, Displacement = final position - initial position
Initially, Jaune traveled 15 meters due North and finally, he travel 8 meters North.
Displcement = 15 m - 8 m
Displacement = 7 m
So, the displacement of Jaune is 7 meters.
Which motor and body should Devon use to build the car with the greatest acceleration? motor 1, with body 1 motor 1, with body 2 motor 2, with body 1 motor 2, with body 2
Answer:
hello your question is incomplete below is the complete question
Devon has several toy car bodies and motors. The motors have the same mass, but they provide different amounts of force, as shown in the table.
Which motor and body should Devon use to build the car with the greatest acceleration?
motor 1, with body 1
motor 1, with body 2
motor 2, with body 1
motor 2, with body 2
answer: Motor 2 body 1
Explanation:
F = ma
hence a ( acceleration ) = F / m
force of motor 2 = 15 N since the mass of the motor is the same and that of the bodies aren't given
The motor and body that would produce the greatest acceleration would be : Motor 2 Body 1 if the mass of Body 1 is less than the mass of Body 2
Answer:
c
Explanation:
A light beam travels through a diamond (n=2.42) to pure water (n=1.33). The refracted ray will:
a) bend toward the normal
b) bend away from the normal
c) remain unchanged
d) bend toward the normal then away
Answer:
b) bend away from the normal
Explanation:
According to snell's law , if i be the angle of incidence and r be the angle of refraction
sin i / sin r = 1.33 / 2.42
sin i / sin r = .55
Hence sin r > sin i
r > i
In other words angle of refraction will be more than angle of incidence . So, the ray will bend away from the normal .
A box 5cm long, 4cm wide and 6cm high would have what volume? Show your work
Explanation:
volume= length×width×height
5cm×4cm×6cm = 20×6= 120cm³An automobile travels a displacement of 75km 45 degrees north of east. How many kilometers north does it travel?
Answer:
It travelled 53.03 Km North.
The distance traveled by the automobile is 53.03 km north.
The given parameter:
the displacement of the automobile, = 75 km 45 degrees north of east.
To find:
the distance traveled by the automobileThe vertical component of the displacement is equal to the distance traveled by the automobile in north.
[tex]distance \ towards \ north = 75 \ km \ \times \ sin(45)\\\\distance \ towards \ north = 75 \ km \times 0.7071\\\\distance \ towards \ north = 53.03 \ km \ north[/tex]
Thus, the distance traveled by the automobile is 53.03 km north.
learn more here: https://brainly.com/question/18376993
The table displays the scores of students on a recent exam. Find the mean of the
scores to the nearest 10th.
Score Number of Students
65
4.
70
2
75
2
80
1
85
7
90
5
Answer:
Solution
x f fx
65 4 260
70 2 140
75 2 150
80 1 80
85 7 595
90 5 450
total N=21 Summation fx=1675
We know
Mean= Summation fx/N
=1675/21
=79.8
Hence, the required mean is 79.8 ans.
The scores of students on a recent exam. The mean of the scores is 51.42857.
What is mean?The mean is the ratio of addition of all the observation values and the number of observations.
The mean of the score is equal to
Mean = {(65×4)+(70×2)+(75×2)+(80×1)+(85×7)+(90×5)} / (4+2+2+1+7+5)
Mean = 51.42857
Therefore, the mean of the scores is 51.42857.
Learn more about mean.
https://brainly.com/question/26509052
#SPJ2
A point on a wave completes one cycle every 5 seconds. The frequency of this wave is 1/5 seconds.
Question 2 options:
True
False
Answer:
True
Explanation:
1 cycle every 5 sec is the same when you set up the ratio as 1/5
Hope this helps!! Have a great day!! :)
where would information on the chemical and physical properties of a specific chemical be located in a laboratory or in the workplace?
Answer:
on the body of the container of the chemical and it also on the shelf where the chemical is kept in the laboratory.
Explanation:
The information on the chemical and physical properties of a specific chemical should be located on the body of the container of the chemical. when storing chemicals in a laboratory the properties, both chemical and physical properties of the chemical should be written out and pasted on the body of the container that contains the chemicals.and also o the shelf where the chemical is kept in the laboratory or workplace .
Tech A says that when a fuse has blown, it just has to be replaced, because it performed its job. Tech B says that when a fuse has blown, the circuit has to be diagnosed because the fuse was probably not the problem. Who is correct
Answer:
tech B
Explanation:
im assuming its ASE or CDX i got my ase certification
you should also always replace that fuse its there to stop a harmful amount of voltage to said thing like a starter or a a fan
What is the angular separation of two spectral lines of wavelengths 497 nm and 251 nm formed in the third order with a diffracting grating having 587 lines per millimeter
Answer:
34.8°
Explanation:
Given the following :
Number of lines (N) = 587mm
529mm to m = 587*1000 = 587000 per meter
d = 1 / N ; 1/587000 = 0.00000170357
Wavelength of light waves :
λ1 = 497nm = 497 × 10^-9 m
λ2 = 251nm = 251 × 10^-9 m
Angular position in 3rd order; m=3
For
λ1 ; dsinθ3 = 3λ1 ;
λ2 = dsinθ3 = 3λ2
Substituting values
dsinθ3 = 3λ1 =
0.00000189 * sinθ3 = 3 * 497 × 10^-9
θ3(1) = sin^-1(1491 * 10^-9 / 0.00000170357)
θ3(1) = sin^-1(0.8752208)
θ3(1) = 61.07°
λ2 = dsinθ3 = 3λ2
0.00000189 * sinθ3 = 3 * 251 × 10^-9
θ3(2) = sin^-1(753 * 10^-9 / 0.00000170357)
θ3(1) = sin^-1(0.4420129)
θ3(1) = 26.23°
Angular separation :
61.07° - 26.23° = 34.84°
34.8°
Dust particles fall down when a carpet or a piece of cloth is beaten by a stick,why?
Dust particles fall down when we hit the carpet or a piece of cloth with a stick because it loses it inertia of rest and move forward, but dust particles fall down in absence of the carpet.
if an object is moving with constant speed then its distance-time graph will be a straight line. (a)along time axis. (b)along distance axis (c)parallel to time axis (d)inclined to time axis
Answer: (d)inclined to time axis
Explanation:
For a moving object, the distance equation can be written as:
D = S*t
if S = 0, we will have a line parallel to the time axis.
if S = infinity we will have a line parallel to the distance axis.
Both options are discarded here, as S = ∞ is not possible, and S = 0 would mean that the object is not moving.
where D is the distance moved at the time t, t is the variable, and S is the speed of the object.
As S is constant, this equation defines a linear relationship.
The graph of this line will be a line that is not parallel either to the time axis nor the distance axis, this will be an inclined line that goes between them.
So the correct option is: (d)inclined to time axis
An atom of sodium-23 (Na-23) has a net charge of +1. Identify the number of protons, neutrons, and electrons in the atom. Then, explain how you determined the number of each type of particle
Answer:
11 protons, 12 neutrons, 10 electrons
Explanation:
Sodium has an atomic number of 11, so it has 11 protons.
The atomic mass is 23, so there are 23 − 11 = 12 neutrons.
The charge is +1, so there is 1 more proton than electrons, so there are 10 electrons.
800 J of heat is needed to raise the temperature of 2 kg of iron by 1°C. What is the heat capacity of 3.6 kg of iron?
Answer: 1440 J/kg/degree Celsius
Explanation:
Heat capacity = thermal energy required / change in heat
What is your average velocity or speed if you travel 500 km in 3 hours
Answer:
166.6 km/h
Explanation:
500/3
=166.6