Explanation:
after learning more about the position and would
Arrange the events for the hydrolysis of amide bonds by chymotrypsin in their correct order.
1. attack by Ser 195 to give a tetrahedral intermediate
2. protonation by His 57 and release of the free C-terminus of the hydrolyzed bond
3. protonation by His 57 and release of the free N-terminus of the hydrolyzed bond
4. attack by water, leading to formation of a tetrahedral intermediate
5. binding of substrate to properly position the scissile bond for cleavage
a. 5, 1, 3, 4, 2
b. 5,1,2,4,3 5,
c. 1, 3, 2,4 5,
d. 2, 4, 3, 1
Answer:
The answer is A
Explanation:
the order 5,1,3,4,2
what is negative in food sterilization?
Answer:
Thermal food sterilization and pasteurization are the most widespread preservation technologies to extend food shelf life by inactivating microorganisms and enzymes that can deteriorate foodstuffs.
Explanation:
The process requires constant attention.
The equipment that it requires are costly.
Keeping moisture in food is difficult because of low moisture contents in the machine.
What is the molarity of an ethanol solution containing 10.0g of ethanol in
water with a total volume of 100ml?
Answer:
2.17 moldm-3
Explanation:
Molarity is the number of moles of solute in a unit volume.
The atomic masses of
C -12
H-1
O-16
Therefore molar mass ( mass of 1 mol ) of ethanol ( CH3CH2OH )
( 12 x 2 ) + (1 x 6) + 16 = 46 g/mol
In 10 g of ethanol 10/46 mol should be present
So the molarity is (10/46) mol ÷ 100ml
= 10/ 46 mol ÷ 0.1 l
1L = 1 dm3
Therefore molarity = 10/46 mol ÷ 0.1 dm3
= 2.17 mol/dm3
Will the things dissolve by themselves over time?
When a substance dissolves, it looks like it disappears. But in fact it has just mixed with the water to make a transparent (see-through) liquid called a solution. A solution has two parts. The solute is the solid that gets dissolved.
Answer:
it really depends what they are
Explanation:
Violet light has a wavelength from 380 nm to 420 nm.
What velocity must a free electron have in order to exhibit the same wavelength as a violet photon with a
wavelength of 415 nm?
This question involves the concepts of de Broglie's wavelength and momentum.
The velocity of the electron must be "1754.27 m/s".
de Broglie's wavelength is a wavelength associated with a moving matter particle. It is connected to the momentum of the particle by the following formula:
[tex]P =\frac{h}{\lambda}\\\\mv=\frac{h}{\lambda}\\\\v=\frac{h}{m\lambda}\\\\[/tex]
where,
v = velocity of electron = ?
h = Plamk's Constant = 6.625 x 10⁻³⁴ J.s
m = mass of electron = 9.1 x 10⁻³¹ kg
λ = de Broglie's wavelength = 415 nm = 4.15 x 10⁻⁷ m
Therefrore,
[tex]v=\frac{6.625\ x\ 10^{-34}\ J.s}{(9.1\ x\ 10^{-31}\ kg)(4.15\ x\ 10^{-7}\ m)}[/tex]
v = 1754.27 m/s
Learn more about de Broglie's wavelength here:
https://brainly.com/question/20339737?referrer=searchResults
How many total atoms are given in the compound 5ZnSO4?
Answer: 6 total atoms
Explanation:
Solid calcium hydroxide is dissolved in water until the pH of the solution is 11.44. The hydroxide ion concentration [OH–] of the solution is:______.A. 1.1 * 10-11 M.B. 3.06 M.C. 8.7 * 10-4 M.D. 1.0 * 10-14 M.E. None of these.
Answer:
c the answer is c that is the answer
Which class of macromolecule was described as being most like the hydrocarbons?.
Answer:
Fats........................
Lipids is the class of macromolecule was described as being most like the hydrocarbons.
what are Macromolecules ?Macromolecules are bigger molecules of large size and made of smaller molecules called as monomers, Polymers are macromolecules.
All Macromolecules are not like the hydrocarbon because the macromolecules not only consists of C and H atoms but also N and O.
Macromolecules are classified into 4 types
Proteins , Carbohydrates , Lipids and Nucleic Acids
Lipids is the class of macromolecule was described as being most like the hydrocarbons.
Lipids are a broad category of chemicals that are mostly nonpolar in nature.
This is due to the fact that they are hydrocarbons with nonpolar carbon–carbon or carbon–hydrogen bonds.
To know more about Macromolecules
https://brainly.com/question/15237842
#SPJ2
A sound wave is an example of a __________ wave. It requires a _________ to transfer energy
Question 2 options:
medium, longitudinal
longitudinal , medium
medium, transverse
transverse, medium
Answer:
example of a medium, it requires a transverse
For the reaction, calculate how many moles of the product form when 0.046 mol of O2 completely reacts.
Assume that there is more than enough of the other reactant.
2Ca(s)+O2(g)→2CaO(s)
Express your answer using two significant figures.
Answer: 0.023 moles of CaO.
Explanation:
The balanced equation tells us that we'll get 2 moles of CaO for every one mole of O2. Since we have 0.046 moles of O2, we'll get 0.023 moles of CaO. (2 sig figs)
Please help I have a C in advance chemistry
Answer:
I think it's 2.50M IM NOT SURE THOUGH SO I RECOMMEND WAITING FOR ANOTHER ANSWER
how many moles of hydrogen are there in one mole of h2o?
a. How many protons?
b. How many neutrons?
c. What is the name of this atom?
PLS HELP ILL GIVE BRAINLIEST
Which image represents a homogeneous mixture?
Which image represents a heterogeneous mixture?
Imagine A represents a heterogeneous mixture as it is a mixture composition that does not remain the same throughout the mixture whereas Imagine B represents a homogeneous mixture as it does not have any change or irregularity.
What are Homogenous and Heterogenous mixtures?A homogeneous mixture is defined as having a fairly uniform form and composition, so many homogeneous mixtures are referred to as solutions whereas heterogeneous mixtures are defined as separate substances or phases. The three states or states of matter are gas, liquid and solid.
Some examples of mixtures that include mixtures of sand and water, mixtures of sugar and salt, and mixtures of lime juice and water.
In homogenous solution, particles are distributed uniformly and have uniform composition while in heterogenous solution, particles are distributed non-uniformly and have non-uniform composition
Thus, Imagine A represents a heterogeneous mixture as it is a mixture composition that does not remain the same throughout the mixture whereas Imagine B represents a homogeneous mixture as it does not have any change or irregularity.
Learn more about Homogenous mixture, here:
https://brainly.com/question/24898889
SPJ2
What is the major product formed when the alcohol is treated with hcl?.
Answer: Alcohol undergoes nucleophilic substitution when reacted with hydrohalic acids (HX) such as HCl.
Explanation:
Read through the literacy task
find the mistakes and rewrite
Find and highlight the 10 mistakes
Atoms are the smallest particle that make up living things, they are made up of subatomic particles; protons, neutrons and electrons. Of these the electrons and neutrons are in the nucleus and the protons orbit around the nucleus. Of the subatomic particles, the electrons have the largest mass and are negatively charged, the neutrons (negative charge) and protons (positively charged) both have a relative mass of 1. Atoms contain an equal number of protons and neutrons, so carry no overall charge. An element is a substance made up of only two types of atom. Elements can be found in the Periodic table of elements, they usually have two numbers next to the chemical symbol, the larger number is generally the atomic number, which represents the number of neutrons and the number of protons. The smaller number is the relative atomic mass which represents the number of electrons or neutrons. In order to calculate the number of neutrons, you minus the atomic number from the relative atomic mass.
Answer:
Atoms are the smallest particle that make up living both living and non living things, they are made up of subatomic particles; protons, neutrons and electrons. Of these the electrons protons and neutrons are in the nucleus and the protons electrons orbit around the nucleus. Of the subatomic particles, the electrons have the largest smallest mass and are negatively charged, the neutrons (negative charge) (no charge) and protons (positively charged) both have a relative mass of 1. Atoms contain an equal number of protons and neutrons electrons, so carry no overall charge. An element is a substance made up of only two one type of atom. Elements can be found in the Periodic table of elements, they usually have two numbers next to the chemical symbol, the larger number is generally the atomic mass number, which represents the number of neutrons and the number of protons. The smaller number is the relative atomic mass atomic number which represents the number of electrons or neutrons protons. In order to calculate the number of neutrons, you minus the atomic number from the relative atomic mass.
The diagram shows fertilization, the union of sperm cell and egg cell.
The traits of the offspring of the fertilized egg are coded onto
A
lipids in the offspring's cell membranes.
B
enzymes in the offspring's ribosomes.
C
genes in the offspring's chromosomes.
D
water in the offspring's mitochondrion.
According to coulomb's law, in which ionic compound are the attractive forces the strongest?.
Answer:
A cation with a 2+ charge will make a stronger ionic bond than a cation with a 1+ charge. A larger ion makes a weaker ionic bond because of the greater distance between its electrons and the nucleus of the oppositely charged ion.
How many milliliters of a stock solution of 12.1 M HNO3 would be needed to prepare 0.500 L of 0.500 M HNO3
Answer:
(5.00M)(X) = (0.120L)(0.470M)
X = (0.120)(0.470)/(5.00)
0.01128
Explanation:
12.1 M HNO3 would be needed to prepare 0.500 L of 0.500 M HNO3 stock solution is 0.01128 milliliters.
What is stock solution ?
The ideal way to define stock solutions is as concentrated solutions with precise, known concentrations that will be diluted for later laboratory usage. Even though you may decide against making stock solutions, doing so may help you run your business more efficiently and save you a ton of time and money.
where C1 x V1 = C2 x V2. Stock concentration, C1 ( beginning concentration ) V1 is the amount of stock needed to make the new solution. C2 is the concentration of a fresh or effective solution.
( 5.00M ) ( X ) = ( 0.120 liter ) ( 0.470 M )
Then, X = 0.120 × 0.470 ÷ 5.00
= 0.01128 milliliters.
Thus, 12.1 M HNO3 would be needed to prepare 0.500 L of 0.500 M HNO3 stock solution is 0.01128 milliliters.
To learn more about stock solution follow the link;
https://brainly.com/question/17018950
#SPJ2
Convert 1.56x10^30 particles of sodium chloride to grams of sodium chloride
Answer:
I cannot tell yet
Explanation:
I don't take that class yet but ill get back to you
how many repeat units are required to make a nylon polymer with a formula weight of 15,000 amu?
This problem is giving information about a nylon polymer whose molar mass is 15,000 amu (atomic mass units).
The first subject of matter here, is to recall the monomeric molecular formula of nylon which is C₁₂H₂₂N₂O₂, and the definition of monomer (basic molecule able to react and form a polymer) and polymer (assembling of monomers).
Next, we calculate the molar mass of the monomer of nylon:
[tex]12*12.01+22*1.01+2*14.01+2*16.00=226.31amu[/tex]
Finally, the number of units is calculated by dividing the molar mass of the polymer and the monomers:
[tex]n=\frac{15000}{226.31} =66.2[/tex]
Which is about 66 monomers.
Learn more:
https://brainly.com/question/21230841https://brainly.com/question/15160603Answer:
66 monomers
Explanation:
What is the IUPAC name for NH3? ammonia mononitrogen hydride mononitrogen trihydride nitrogen trihydride.
The IUPAC name for NH3 is Ammonia
The IUPAC name is also known as (International Union of Pure and Applied Chemistry) and it is a standardized system by chemical scientists for naming chemical compounds.
The IUPAC name for NH3 is Ammonia. Ammonia is a colorless gas with a stifling odor that is an exceedingly unpleasant pungent smell. It dissociates quickly in water to generate ammonium hydroxide, which can irritate and burn the skin.
It serves an agricultural purpose such as fertilizer.It is also used for the production of plastics, textiles, insecticides, etc.Learn more about the IUPAC naming system here:
https://brainly.com/question/23036094?referrer=searchResults
Protons
Charge:
Mass:
Location:
Role in the atom:
Answer:
Protons are positively charged. The mass is slightly lower than a neutron.The location of a proton is nucleus. The the role of a proton is to help bind the nucleus together.
Explanation:
which value represents the first ionization energy of a nonmetal
Answer:
increase in going from left to right across a given period.
Explanation:
Nonmetals, which are found in the right-hand region of the periodic table, have relatively large ionization energies and therefore tend to gain electrons. Ionization energies generally increase in going from left to right across a given period.
hope it is helpful:)
Does anyone know what the answer to the question is?
Answer:
rate = (6.48 M-1 • s-1)[Cl2O5]2
Explanation:
PLZ HELP!!!
What are 3 genetic disorders caused by either missing or extra chromosomes? In your own words, provide a brief short explanation of what causes the disorder and some potential symptoms.
BEST ANSWER WILL BE MARKED AS BRAINLIEST!!!
Answer:
Humans have 23 pairs of chromosomes.
A trisomy is a chromosomal condition characterised by an additional chromosome.
A person with a trisomy has 47 chromosomes instead of 46.
Down syndrome, Edward syndrome and Patau syndrome are the most common forms of trisomy.
Explanation:
When a certain isotope, such as Pa-231, is hit by a neutron, it will always split into the same smaller nuclei.
true or false
Answer: false
Explanation:
Achemist is studying an unknown substance and could break the substance into its elemental components only by using
chemical means?
help asap for brainlist
Which statement BEST describes how many Aluminum atoms are needed when making Aluminum chloride?
Question 11 options:
1 Aluminum atom is needed because Aluminum donates one valence electron to Chlorine.
3 Aluminum atom is needed because Aluminum donates three valence electron to Chlorine.
3 Aluminum atom is needed because Aluminum accepts three valence electron from Chlorine.
2 Aluminum atom is needed because Aluminum accepts three valence electron from Chlorine.
Answer:
34 Aluminum Atoms needed to make Aluminum Chloride
Explanation:
Because through this bottom 34 atoms are subheading to make Aluminum Chloride through magnesiumWhich event is an example of an exothermic reaction? (1 point)
o evaporation
o melting ice
O combustion
o decomposition
Answer:
An exothermic reaction is defined as a reaction that releases heat and has a net negative standard enthalpy change. Examples include any combustion process, rusting of iron, and freezing of water.
Explanation:
An exothermic reaction is defined as a reaction that releases heat and has a net negative standard enthalpy change. Examples include any combustion process, rusting of iron, and freezing of water.
The combustion is an example of an exothermic reaction.
An exothermic reaction is a reaction that releases energy, this energy is usually in the form of heat. An endothermic reaction is a reaction that absorbs energy to take place.
Analyzing the given reactions we have that:
Evaporation: need to absorb energy to increase the kinetic energy of the moleculesMelting ice: need to absorb energy to increase the kinetic energy of the moleculesCombustion: releases energy after forming bonds between moleculesDecomposition: need to absorb energy to break moleculeSo, the combustion is an example of an exothermic reaction.
Learn more about exothermic reaction in: brainly.com/question/14969584