One mole of the ionic compound NaCl will dissolve into two moles of particles in aqueous solution.
When NaCl dissolves in water, it dissociates into its constituent ions, Na+ and Cl⁻. Each formula unit of NaCl dissociates into one Na⁺ ion and one Cl⁻ ion, so one mole of NaCl will produce one mole of Na⁺ ions and one mole of Cl⁻ ions, for a total of two moles of particles.
It's important to note that not all ionic compounds will dissociate into two ions like NaCl does. Some ionic compounds, like CaCO₃ (calcium carbonate), will only dissociate partially into ions in solution, while others may dissociate into more than two ions. However, for NaCl specifically, one mole will dissociate into two moles of particles in solution.
To know more about the NaCl, here
brainly.com/question/18248731
#SPJ4
You have 500. Ml of a solution containing 0. 20 m acetic acid (ch3cooh) and 0. 30 m sodium acetate (ch3coona). What will be the ph of the solution that results after the addition of 20. 0 ml of 1. 00 m naoh(aq)?.
The pH of the solution after adding 20.0 mL of 1.00 M NaOH will be 9.24.
The pH of a solution containing a weak acid and its salt will be affected by the addition of a strong base, such as NaOH. The initial solution contains acetic acid, a weak acid, and sodium acetate, its conjugate base.
To simplify the answer:
The addition of 20.0 mL of 1.00 M NaOH to a solution containing acetic acid and its conjugate base will result in a decrease in pH.The pH of the solution after the addition of NaOH will be 9.24.The addition of NaOH will consume some of the acetate ions, converting them back into acetic acid and increasing the concentration of hydrogen ions in the solution. This will result in a decrease in pH. To calculate the pH after the addition of NaOH, we can use the concept of an acid-base buffer.
Learn more about Acetic acid:
https://brainly.com/question/15231908
#SPJ4
what effect would this spread small particle have in helping A) albedo affect B) climate forcing effect C) reinforcing effect D) greenhouse effect
Small particles, also known as aerosols, can have various effects on the Earth's climate. The specific effects depend on the type of aerosols, their size and composition, and their location in the atmosphere.
What are the possible effects of small particles?Here are some possible effects:
A) Albedo effect:
The albedo effect refers to the ability of the Earth's surface to reflect incoming solar radiation. Some aerosols, such as sulfate and organic carbon aerosols, can increase the reflectivity of the Earth's surface by scattering and absorbing sunlight. This effect tends to cool the Earth's surface and lower the temperature.
B) Climate forcing effect:
Climate forcing refers to the imbalance between incoming solar radiation and outgoing longwave radiation, which drives changes in the Earth's climate. Some aerosols, such as black carbon and organic carbon aerosols, can absorb incoming solar radiation and warm the atmosphere, while others, such as sulfate aerosols, can scatter and reflect sunlight and cool the atmosphere. The net effect of aerosols on climate forcing depends on their type, location, and concentration.
C) Reinforcing effect:
The reinforcing effect refers to the feedback between aerosols and other climate factors, such as clouds and precipitation. Some aerosols can influence cloud properties by serving as cloud condensation nuclei or ice nuclei, which can affect the amount, distribution, and lifetime of clouds. This effect can either amplify or dampen the original climate forcing by aerosols.
D) Greenhouse effect:
The greenhouse effect refers to the trapping of outgoing longwave radiation by greenhouse gases in the atmosphere, which warms the Earth's surface. Aerosols do not directly affect the greenhouse effect, but they can indirectly affect it by altering the amount and distribution of clouds, which can affect the radiative balance of the Earth's atmosphere.
Learn more about albedo effect here: https://brainly.com/question/14238698
#SPJ1
an nacl solution is prepared by dissolving 20.0 g nacl in 150.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
a.0.9304 torr
b.0.4746 torr
c.21.77 torr
d.0.8950 torr
e.22.63 torr
The vapor pressure of the solution if the vapor pressure of water at 25 °Cis 23.56 torr is 22.63 torr.
The mass of the NaCl = 20 g
The molar mass of the NaCl = 58.44 g/mol
The moles of the NaCl = mass / molar mass
= 20 / 58.44
= 0.34 mol
The mass of the water = 150 g
The moles of the water = mass / molar mass
= 150 / 18
= 8.33 mol
The total moles = 0.34 + 8.33
= 8.67 mol
The mole fraction of the water = mole of water / total moles
= 8.33 / 8.67
= 0.96
The vapor pressure of the solution = 0.96 × 23.56
= 22.63 torr
To learn more about vapor pressure here
https://brainly.com/question/30656614
#SPJ4
what is the relationship between the following two molecules?
OH OH Not yet answered Marked out of 1.00 Hw Cl H3C CH3 Flag a. Constitutional isomers b. Conformational isomers c. Diasteriomers d. Enantiomers None of these
The two molecules shown are constitutional isomers, as they have the same molecular formula (C3H7Cl) but different structural arrangements of the atoms.
Constitutional isomers differ from conformational isomers, diastereomers, and enantiomers in that they have different arrangements of atoms in their structures.
Conformational isomers have the same arrangement of atoms, but differ in the 3D shape of the molecule; diastereomers have different chiral centers and hence different configurations; and enantiomers are mirror images of each other.
Learn more about molecules :
https://brainly.com/question/475709
#SPJ4
Is milk a strong or weak acid or base?
Milk is not a strong acid or strong base. Milk is slightly acidic . It almost has the range of pH 6.5 to 6.7.
In milk there is lactic acid. Lactic acid is a very weak acid. It is produced by the bacteria that ferment lactose in milk.
The acidity of lactic acid or milk is very mild and not at all strong enough to cause any significant acidic effects.
A strong acid in water completely ionizes the water and gives up the complete H+ ions. pH is actually determined by if the substance donates H+ ions or receives OH- ions.
If substance donates H+ it is acid and if substance receives OH- it is base. If it is acid the pH will be less than 7. If it is base the pH will be above 7. Neutral will be pH 7.
Learn more about acid:
https://brainly.com/question/30400638
#SPJ4
how does the collision model explain the effect of concentration on the reaction rate
The collision model explains that in order for a reaction to occur, reacting molecules must collide with sufficient energy and proper orientation.
The probability of a successful collision increases with the number of collisions, which in turn is dependent on the concentration of the reactants. As the concentration of the reactants increases, the number of collisions per unit of time also increases, leading to an increase in the rate of reaction.
This is because there are more molecules available to collide, resulting in a higher frequency of successful collisions. Thus, increasing the concentration of reactants leads to an increase in the rate of reaction, according to the collision model.
To learn more about rate of reaction refer to:
brainly.com/question/30546888
#SPJ4
a ground-state atom of which element has one electron in its fourth and outermost main energy level?a. Kb. Nac. Bd. Ga
A ground state atom of the element that has the one electron in its fourth and the outermost main energy level is the correct option is a. K.
The atomic number of the element potassium ,K is 19. The potassium atom has the 19 protons and the 19 electrons. There are 2 electrons on the potassium atom first energy level, the 8 electrons on the potassium atom second level, the 8 electrons on the potassium atom third energy level, and 1 on the potassium fourth energy level.
Thus, the fourth energy level of the element potassium has the only 1 electron.
To learn more about energy level here
https://brainly.com/question/19819922
#SPJ4
The 1h nmr spectrum of a particular compound contains 5 signals. this means that the compound _____.
The 1h nmr spectrum of a particular compound contains 5 signals, this means that the compound contains five unique sets of chemically nonequivalent hydrogen atoms.
In proton nuclear magnetic resonance (1H NMR) spectroscopy, each signal in the spectrum corresponds to a set of chemically nonequivalent protons, which have slightly different chemical environments and therefore different resonance frequencies.
If the 1H NMR spectrum of a compound contains 5 signals, it means that there are 5 sets of chemically nonequivalent protons in the compound, which can arise from different types of functional groups or different positions of protons within the same functional group.
The number of signals in the 1H NMR spectrum can provide valuable information about the molecular structure and can be used to determine the identity of the compound.
To know more about spectrum here
https://brainly.com/question/28260199
#SPJ4
What is the common name for 2,3-dimethylbutane?
The common name for 2,3-dimethylbutane is diisopropyl.
In the IUPAC nomenclature system, the name 2,3-dimethylbutane indicates that there are two methyl groups (-CH₃) attached to the second and third carbon atoms of the butane chain.
However, in common naming, the two methyl groups are referred to as isopropyl groups, giving the compound the name diisopropyl. It is an organic compound with the chemical formula C₆H₁ and is an isomer of hexane.
It is important to note that there are other isomers of hexane with different common names, such as 2-methylpentane (isohexane) and 3-methylpentane (neo-hexane).
To know more about diisopropyl here:
https://brainly.com/question/24301056#
#SPJ11
Assume that c is a variable that has been assigned a string value. Write an expression whose value is true if and only if c is a space character.
The expression whose value is true if and only if c is a space character is c.isspace().
In Python, you can use the isspace() method to check if a character is a space character. Here is an expression that will return True if the variable c contains a space character, and False otherwise:
c.isspace()
This expression will evaluate to True if c is a space character, including regular spaces, tabs, and other whitespace characters. If c is not a space character, the expression will evaluate to False.
isspace() is a method in Python that can be called on a string object. The method returns True if all characters in the string are whitespace characters, and False otherwise.
Learn more about c.isspace here:
https://brainly.com/question/16177828
#SPJ4
why would you expect a 1.5 m cacl2 solution to have a lower freezing point than a 1.5 m nacl solution?
a. CaCl, has more particles when dissolved b. NaCl has more particles when dissolved
c. CaCl2 is warmer than NaCl d. It won't. They should have the same freezing point
CaCl, has more particles when dissolved expect a 1.5 m cacl2 solution to have a lower freezing point than a 1.5 m nacl solution.
What does dissolve means?
Dissolve is a term used to describe a process in which a solid substance is broken down into a liquid form. This is done by adding a solvent, such as water, to the solid and allowing it to mix with the solid until the solid is completely broken down into a liquid form. Dissolving is a common process used in chemistry, medicine, and food preparation.
Depression of freezing point is a colligative property. That means it depends upon the no. of particles of the solute in the solvent. The greater no. of ions in the Solution, lower is the freezing point depression.
In CaCl2 → ca2+ + 2cl Total 3 ions present in a molecule, but in NaCl → Na+ + cl total 2 ions present. 50 for CaCl2 the depression of freezing point is lower than NaCl.
Therefore, CaCl, has more particles when dissolved is the correct answer.
To learn more about dissolve from the link
https://brainly.com/question/2364287
#SPJ4
Chemistry help needed !!
At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
What is pentane?Pentane is an organic compound with the formula C₅H₁₂ - that is, an alkane with five carbon atoms.
Given is to understand why the temperature increase at the of the experiment.
At the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
Therefore, at the end of the experiment the temperature increase due to increase in the average kinetic energy of the pentane molecules.
To solve more questions on electrostatic energy scaling, visit the link-
brainly.com/question/29014197
#SPJ1
What is IR correlation table?
An IR correlation table is a reference table used in the analysis of infrared spectra to identify functional groups present in a sample.
Infrared (IR) spectroscopy is a widely used technique in chemistry to identify the presence of functional groups in a sample. An IR correlation table is a reference table that lists the common absorption frequencies of different functional groups in the IR spectra.
The table is used to correlate the observed absorption peaks with the corresponding functional groups in the sample. This is important in the identification and characterization of unknown compounds in various fields such as organic chemistry, biochemistry, and material science.
To know more about the correlation, here
brainly.com/question/30116167
#SPJ4
A solution is prepared by dissolving 23. 7 g of cacl2 in 375 g of water. The density of the resulting solution is 1. 05 g/ml. The concentration of cl- in this solution is ________ m.
The concentration of chloride ions in the solution is 0.012 mM.
To determine the concentration of chloride ions (Cl-) in the solution, we need to first calculate the number of moles of calcium chloride (CaCl2) that were dissolved in the solution. We can use the formula weight of calcium chloride, which is 110.98 g/mol:
=> 23.7 g CaCl2 / 110.98 g/mol
=> 0.214 moles CaCl2
Next, we need to determine the number of moles of chloride ions produced when the calcium chloride dissolves. Since calcium chloride is an ionic compound, it dissociates into its constituent ions when dissolved in water. For every mole of calcium chloride that dissolves, one mole of calcium ions (Ca2+) and two moles of chloride ions (Cl-) are produced.
So, the number of moles of chloride ions produced is twice the number of moles of calcium chloride that were dissolved:
0.214 moles CaCl2 * 2 moles Cl- / 1 mole CaCl2
=> 0.428 moles Cl-
Finally, to determine the concentration of chloride ions in the solution, we need to divide the number of moles of chloride ions by the volume of the solution. The volume of the solution can be calculated from its mass and density:
=> 375 g solution / 1.05 g/mL
=> 358.33 mL
Now we can calculate the concentration of chloride ions in moles per milliliter (mM):
=> 0.428 moles Cl- / 358.33 mL
=> 0.012 mM Cl-
To learn more about Concentration :
https://brainly.com/question/13764840
#SPJ4
What intermolecular forces are associated with solid NaCl salt?
Ion-dipole interaction forces are associated with solid NaCl salt.
What are the characteristics of solid?
1. Solids have a definite shape and volume.
2. Solids have a high density, meaning there is a lot of matter in a very small space.
3. Solids are generally incompressible, meaning they cannot be compressed into a smaller volume.
4. Solids are generally rigid, meaning they cannot be deformed easily.
5. Solids are relatively strong, meaning they can resist external forces without breaking apart.
Ion-dipole interaction forces are electrostatic forces of attraction between a charged ion and a dipole molecule. In the case of solid NaCl salt, the ions are Na+ and Cl- and the dipole molecules are the water molecules in the solution. The interaction between the ions and the dipole molecules causes the ions to be attracted to the dipole molecules, resulting in an attractive force between the two. This force helps to stabilize the solid NaCl crystal structure and also contributes to the solubility of the salt in water.
Therefore, Ion-dipole interaction is the answer.
To learn more about solid from the link
https://brainly.com/question/28620902
#SPJ4
if an unknown compound has a moderately intense, wide peak in the 3200-3400 cmâ1 region, what functional group is likely present? a) carboxylic acid b) alcohol c) alkane d) ketone e) ester
If an unknown compound has a moderately intense, wide peak in the 3200-3400 cm-1 region, then alcohol functional group is likely present.
What is a compound?
A compound is created when two or more components join chemically in a predetermined mass ratio. A compound is a substance made up of two or more different types of elements together in a specific proportion of their atoms. Some of the particular qualities of the constituent parts are lost during fusion, while the newly created molecule acquires new characteristics.
Chemical Formula: The chemical formula identifies a compound. The ratios of atoms that make up a certain chemical molecule are symbolically represented in a chemical formula.
To learn more about compound visit;
https://brainly.com/question/14117795
#SPJ4
Which shows the correct Lewis
structure of AsH?
The Lewis structure is shown by option A
What is the Lewis structure?The Lewis structure, also known as a Lewis dot diagram, is a type of structural formula that represents the valence electrons of an atom in a molecule. It is named after Gilbert N. Lewis, who developed the concept in 1916.
In a Lewis structure, the symbol of an element represents the nucleus and inner electrons of the atom, while dots or crosses surrounding the symbol represent the valence electrons. The valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. By drawing Lewis structures, one can determine the number of bonds that an atom can form, and predict the molecular geometry of a molecule.
We can see that arsenic is in group 15 hence it would have one lone pair and three bo0nd pairs as shown
Learn more about Lewis structure:https://brainly.com/question/20300458
#SPJ1
Answer:A
Explanation: Got it right
For the following reaction, determine which way the equilibrium would shift, toward the products or toward the reactants, given the proposed change. Assume the reaction is endothermic.
For the following reaction, determine which way th
Part A: If D was removed
Part B: If more B was added to the reaction
Part C: If the reaction was heated
1) The reaction moves forward
2) The reaction moves forward
3) The reaction moves forward
What is an endothermic reaction?An endothermic reaction is a chemical reaction that absorbs heat energy from its surroundings. In other words, the reaction requires energy input in order to proceed. This can result in a decrease in temperature in the immediate vicinity of the reaction.
During an endothermic reaction, energy is absorbed as reactant molecules break apart and new bonds form to create products.
Learn more about endothermic reaction:https://brainly.com/question/23184814
#SPJ1
Why Is Water the Universal Solvent?
Generally, water is known as the universal solvent as it dissolves more chemicals than any other known solvent.
Basically at the molecular level, salt basically dissolves in water due to electrical charges and due to the fact that both water and salt are the compounds which are polar, and with positive and negative charges on opposite sides in the molecule. This property of water allows the water molecule to become attracted to many other different types of molecules.
It is true that universal solvent does not exist. Water is basically known as the universal solvent because it dissolves more chemicals than any other solvent. However, water is the solvent that only dissolves with other polar molecules.
Learn more about universal solvent from the link given below.
https://brainly.com/question/1834245
#SPJ4
What material, when dry, tends to form the largest angle of repose?
Angular gravel when dry, tends to form the largest angle of repose.
A type of building material known as crushed stone or angular rock is created by mining a suitable rock deposit and using crushers to reduce the extracted rock to the required size.
The steepest angle of fall or dip in relation to the horizontal plane to which a granular material can be piled without collapsing is known as the angle of repose, or critical angle of repose. The material on the slope face is almost ready to slide at this angle. Angles of repose can be between 0° and 90°.
Learn more about angle of repose here brainly.com/question/23683999
#SPJ4
What are the genetic forms of hypertriglyceridemia?
There are several genetic forms of hypertriglyceridemia, including:
What is hypertriglyceridemia?
Hypertriglyceridemia is a medical condition characterized by high levels of triglycerides in the blood. Triglycerides are a type of fat found in the blood that provides energy to the body. Elevated levels of triglycerides are a risk factor for cardiovascular disease and pancreatitis.
Familial combined hyperlipidemia (FCHL): This is a genetic disorder that affects the way the body processes cholesterol and triglycerides. It is characterized by high levels of both LDL (low-density lipoprotein) and triglycerides.Familial hypertriglyceridemia (FHTG): This is a genetic disorder that is caused by mutations in genes that regulate the production and breakdown of triglycerides. It is characterized by high levels of triglycerides in the blood.Familial lipoprotein lipase deficiency (FLPLD): This is a rare genetic disorder that affects the body's ability to break down and clear triglycerides from the blood. It is caused by mutations in the LPL gene and is characterized by very high levels of triglycerides in the blood.Apolipoprotein C-II deficiency (APOC2): This is a rare genetic disorder that is caused by mutations in the APOC2 gene. It results in a deficiency of apolipoprotein C-II, which is necessary for the breakdown of triglycerides in the blood. This leads to very high levels of triglycerides in the blood.Monogenic familial hypertriglyceridemia: This is a rare genetic disorder that is caused by mutations in genes that regulate the production and breakdown of triglycerides. It is characterized by high levels of triglycerides in the blood.To learn more about Hypertriglyceridemia:
https://brainly.com/question/25435720
#SPJ4
an nacl solution is prepared by dissolving 50.0 g nacl in 200.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?A. 1.574 torrB. 1.686 torrC. 20.41 torrD. 0.8764 torrE. 21.87 torr
Therefore, the vapor pressure of the solution is approximately 20.80 torr, which is closest to option C: 20.41 torr.
To calculate the vapor pressure of the solution, we can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution.
The mole fraction of water can be calculated as follows:
moles of water / (moles of water + moles of NaCl)
= (200.0 g / 18.015 g/mol) / [(200.0 g / 18.015 g/mol) + (50.0 g / 58.44 g/mol)]
= 0.883
Raoult's law states that the solution's vapour pressure is:
Water mole fraction * water vapour pressure
= 23.56 torr * 0.883
= 20.79928 torr.
Learn more about vapor pressure here:
https://brainly.com/question/11864750
#SPJ4
an nacl solution is prepared by dissolving 50.0 g nacl in 200.0 g of water at 25°c. what is the vapor pressure of the solution if the vapor pressure of water at 25°c is 23.56 torr?
The vapor pressure of the NaCl solution is 22.66 torr.
What is Vapor Pressure?
It is the result of molecules escaping from the surface of a liquid or solid and entering the gas phase. The vapor pressure is dependent on the temperature and the intermolecular forces between the molecules. As the temperature increases, the vapor pressure of a substance increases as well.
To calculate the vapor pressure of the NaCl solution, we can use Raoult's law, which states that the vapor pressure of a solution is proportional to the mole fraction of the solvent in the solution:
P = X_solvent * P°_solvent
where P is the vapor pressure of the solution, X_solvent is the mole fraction of the solvent (water), and P°_solvent is the vapor pressure of pure water.
First, we need to calculate the mole fraction of water in the solution:
moles of water = mass of water / molar mass of water
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of water = 150.0 g / 18.015 g/mol = 8.326 mol
moles of NaCl = 20.0 g / 58.44 g/mol = 0.342 mol
total moles = moles of water + moles of NaCl = 8.326 mol + 0.342 mol = 8.668 mol
X_water = moles of water / total moles = 8.326 mol / 8.668 mol = 0.962
Next, we can use Raoult's law to calculate the vapor pressure of the solution:
P = X_water * P°_water
P = 0.962 * 23.56 torr = 22.66 torr
Therefore, the vapor pressure of the NaCl solution is 22.66 torr.
DNA has equal number of adenine and thymine residues (A=T) and equal number of guanine and cytosine (G=C). These relationships are known asa. Chargaff's ruleb. Coulomb's lawc. Le-Chatelier's Principled. Van't Hoff plot
Chargaff's criteria, DNA from all cells of all creatures should include a 1 : 1 ratio of pyrimidine and purine bases.
What is meant by Chargaff's rules?According to Chargaff's criteria, DNA from all cells of all creatures should include a 1 : 1 ratio of pyrimidine and purine bases. More specifically, the amounts of guanine and adenine should be identical to each other in terms of their proportions to cytosine and thymine, respectively.
A and T and G and C bases in DNA are always equal in amount, according to this rule. (Adenine, Thymine, Guanine, and Cytosine make up the nucleotide triphosphates.) Erwin Chargaff (1905–2002), a renowned Austrian–American scientist who worked at Columbia University, is honored by having this rule bear his name.
The Chargaff's Rule was established by Erwin Chargaff and serves to illustrate the nitrogenous component of the DNA double helix. The DNA of every organism has an equal number of purines and pyrimidines, or a 1 : 1 ratio, according to this statement.
Therefore, the correct answer is option a. Chargaff's rule.
The complete question is:
DNA has equal number of adenine and thymine residues (A=T) and equal number of guanine and cytosine (G=C). These relationships are known as
a. Chargaff's rule
b. Coulomb's law
c. Le-Chatelier's Principle
d. Van't Hoff plot
To learn more about Chargaff's rules refer to:
https://brainly.com/question/20804844
#SPJ4
What is the molar mass of lead and its atomic number?
The molar mass of lead, Pb atom is equals to 207.02 g/mol. The atomic number of lead in periodic table is 82.
A pure substance known as an element exists in discrete units known as atoms. It is known that an atom is composed of subatomic particles. The identity of an atom depends on the number of protons present in its nucleus. We know that molar mass is defined as the mass of substance in grams divided by moles of substance, that is grams per mole. In the case of atoms, the atomic mass with units is called the atomic mass unit We have lead, an atom of Pb. Now, scanning the periodic table, we find that Lead, labeled Pb, has an atomic number of 82. The atomic mass of lead is 207.2u or molar mass is 207.2 grams per mole.
For more information about periodic table, visit :
https://brainly.com/question/25916838
#SPJ4
You need 65.0 grams of copper for an experiment. How many atoms of copper is this?
You need 65.0 grams of copper for an experiment. There would be 6.16 x 10 ²³ atoms of copper
First we should calculate the moles of copper
Moles cooper = mass/ mass molar
Moles cooper = 65.0 grams / 63.5 g. mol
Moles cooper = 1. 023 moles
The number of atoms in 1 mole of any substance is 6.022 × 10²³ atoms. The Avogadro's number is a common name for this number (NA). It shows how many atoms and molecules make up a mole of a substance.
Quantities that cannot be measured in terms of grams or milligrams are also referred to as moles. A mole is hence the quantity of atoms, ions, or molecules.
The number of atom copper = moles x avogadro's number
The number of atom copper = 1. 023 moles x 6.022 × 10²³ = 6.16 x 10 ²³
Learn more about atoms and molecules here:
brainly.com/question/7013021
#SPJ4
2. How many liters of sulphur trioxide are formed when 4800 cm³ of sulphurdioxide is burned in air? what is the volume
4.8L of sulphur trioxide are formed when 4800 cm³ of sulphur dioxide is burned in air. Sulfur trioxide may be found in three different forms.
What is sulphur trioxide?The chemical compound with both the formula SO[tex]_3[/tex] is sulfur trioxide. It has been regarded as "unquestionably the much more commercially significant" sulfur oxide. It is manufactured on a large level as a precursor towards sulfuric acid.
Sulfur trioxide may be found in three different forms: gaseous monomer, crystalline trimer, as well as solid polymer. At little below room temperature, sulfur trioxide is indeed a solid with a rather limited liquid range. The major precursor of acid rain is gaseous SO[tex]_3[/tex].
2SO[tex]_2[/tex] + O[tex]_2[/tex] [tex]\rightarrow[/tex] 2SO[tex]_3[/tex]
SO[tex]_2[/tex] is the limiting reactant
Molar ratio between SO[tex]_2[/tex] and SO[tex]_3[/tex] which is 2:2.
1000cm³= 1L
4800cm³×1L/1000cm³= 4.8L
Therefore, 4.8L is the volume.
To know more about sulphur trioxide, here:
https://brainly.com/question/24142291
#SPJ9
Which group has the lowest ionization energy value?
Answer: The alkali metals.
Explanation:
when considering precise mass, which particle has the greatest mass?
When considering the precise mass, the particle has the greatest mass is the neutrons.
The Neutron is the heaviest among all the subatomic particles with the mass of the 1.0087 amu, and the proton has the mass of the 1.0073 amu. The Positron and the electron both have the mass of the 0.00055 amu.
The difference in between the mass of the neutron and the proton is very small. This is the reason that they are both have the relative mass of the one atomic mass unit. The mass of the neutron in the grams is the 1.674 × 10⁻²⁴ grams.
To learn more about mass here
https://brainly.com/question/28907859
#SPJ4
need help to fill im chart
The following is in the order of: Element / Group / Ion Name / Ion Formula
Lithium / Alkali Metals / Lithium Ion / Li⁺Aluminum / Boron Group (Group 13) / Aluminum ion / Al³⁺Fluorine / Halogens / Fluoride Ion / F⁻Strontium / Alkaline Earth Metals / Strontium Ion / Sr²⁺Oxygen / Chalcogens (Group 16) / Oxide Ion / O²⁻Boron / Boron Group (Group 13) / Boron Ion / B³⁺Nitrogen / Nitrogen Group (Group 15) / Nitride Ion / N³⁻ Sulfur / Chalcogens (Group 16) / Sulfide Ion / S²⁻Potassium / Alkali Metals / Potassium Ion / K⁺Iodine / Halogens / Iodide Ion / I⁻