Answer:
To transfer leftover solids to the filtration funnel and wash out crystals after recrystallization, ice cold methanol should be used (the mother liquor used for recrystallization).
Explanation:
Hope this helped
when (S)-3-bromo-2,3-dimethylpentane is treated with sodium chloride with water as the solvent, the products formed are ___________. *Select all that apply
Answer:
(S)-3-chloro-2,3-dimethylpentane
Explanation:
When sodium chloride is treated with bromo dimethylpentane in presence of water, then chloro dimethylpentane is formed. This chemical reaction is stable reaction in water because of its solvency.
Suppose you need to prepare 138.1 mL of a 0.190 M aqueous solution of NaCl. What mass, in grams, of NaCl do you need to use to make the solution
Answer:
Explanation:
· 44 g NaCl Explanation: The problem provides you with the molarity and volume of the target
The answer is rounded to two sig figs, the number of sig figs you have for the molarity of the solution.
The mass of a solute needed to prepare a solution with given volume is find by molarity. The mass of NaCl need to make a 138.1 mL solution of 0.190 M is 1.53 grams.
What is molarity ?Molarity of a solution is a term to express its concentration. Mathematically, it is the ratio of no.of moles of solute to the volume of solution in litres.
Given that, the volume of solution is 138.1 mL. One litre solution is 1000 mL. Hence, 138.1 mL is 0.1381 L. The molarity of the solution is 0.190 M. From these data we can calculate the no.of moles of NaCl as below:
no.of moles = molarity × volume of solution in L
= 0.190 M × 0.1381 L
= 0.0262 moles.
This is the no.of moles required to make the solution.
Molecular mass of NaCl = 58.4 g/mol.
Thus mass of 0.0262 moles of NaCl = 0.0262 mol × 58.4 g/mol
= 1.53 g.
Therefore, the mass of NaCl required is 1.53 g.
To learn more about molarity, refer the link below:
https://brainly.com/question/16727614
#SPJ2
g in the following three compounds(1,2,3) arrange their relative reactivity towards the reagent CH3Cl / AlCl3. Justify your order
Answer:
3 > 2> 1
Explanation:
Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.
Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.
Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.
If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.
Draw the major product that is obtained when (2S,3S)-2-Bromo-3-phenylbutane is treated with sodium ethoxide.
Answer:
Explanation:
The mechanism of the reaction is shown in the diagram below. From the reaction, when (2S,3S)-2-Bromo-3-phenylbutane undergoes a reaction with sodium ethoxide (ETONa), the E2 elimination reaction is put into place. Here, the H and the leaving group are antiperiplanar to one another and the reaction mechanism proceeds to form an isomeric (E)-2-phenyl-2butane as the major product.
What is the mass of 2.30x10^22 formula units of NaOH (molar mass =40.0g/mol)
Answer:
643(%=:(¥75 )(:7$"8"),"7$"()9_/"¥?:
A compound that contains only carbon, hydrogen, and oxygen is 58.8% C and 9.87% H by mass. What is the empirical formula of this substance
Answer: The empirical formula of the compound becomes [tex]C_5H_{10}O_2[/tex]
Explanation:
The empirical formula is the chemical formula of the simplest ratio of the number of atoms of each element present in a compound.
Let the mass of the compound be 100 g
Given values:
% of C = 58.8%
% of H = 9.87%
% of O = [100 - 58.8 - 9.87] = 31.33%
Mass of C = 58.8 g
Mass of H = 9.87 g
Mass of O = 31.33 g
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
To formulate the empirical formula, we need to follow some steps:
Step 1: Converting the given masses into moles.Molar mass of C = 12 g/mol
Molar mass of H = 1 g/mol
Molar mass of O = 16 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of C}=\frac{58.8g}{12g/mol}=4.9 mol[/tex]
[tex]\text{Moles of H}=\frac{9.87g}{1g/mol}=9.87 mol[/tex]
[tex]\text{Moles of O}=\frac{31.33g}{16g/mol}=1.96mol[/tex]
Step 2: Calculating the mole ratio of the given elements.Calculating the mole fraction of each element by dividing the calculated moles by the least calculated number of moles that is 1.96 moles
[tex]\text{Mole fraction of C}=\frac{4.9}{1.96}=2.5[/tex]
[tex]\text{Mole fraction of H}=\frac{9.87}{1.96}=5.03\approx 5[/tex]
[tex]\text{Mole fraction of O}=\frac{1.96}{1.96}=1[/tex]
Converting the mole fraction into whole numbers by multiplying them with 2.
[tex]\text{Mole fraction of C}=2.5\times 2=5[/tex]
[tex]\text{Mole fraction of H}=5\times 2=10[/tex]
[tex]\text{Mole fraction of O}=1\times 2=2[/tex]
Step 3: Taking the mole ratio as their subscripts.The ratio of C : H : O = 5 : 10 : 2
Hence, the empirical formula of the compound becomes [tex]C_5H_{10}O_2[/tex]
The empirical formula of the substance is[tex]C_5H_{10}O_2[/tex].
Explanation:
Given:
A compound made up of 58.8% of carbon, 9.87% hydrogen, and oxygen.
To find:
The empirical formula of this substance.
Solution
The percentage of carbon in a given substance by mass = 58.8%
The percentage of hydrogen in a given substance by mass = 9.87%
The percentage of oxygen in a given substance by mass :
[tex]= 100\%-58.8\%- 9.87\%=31.33\%[/tex]
Consider 100 grams of a substance.
In 100 grams of substance:
The mass of carbon =58.8% of 100 g = 58.8 g
The mass of hydrogen = 9.87% of 100 g = 9.87 g
The mass of oxygen = 31.33% of 100 g= 31.33 g
The moles of carbon [tex]=\frac{58.8 g}{12.0107 g/mol}=4.90 mol[/tex]
The moles of hydrogen[tex]=\frac{9.87g}{1.00784g/mol}=9.79 mol[/tex]
The moles of oxygen[tex]=\frac{31.33g}{15.999g/mol}=1.96 mol[/tex]
let the empirical formula of the substance = [tex]C_xH_yO_z[/tex]
The value of subscript x:
[tex]=\frac{4.90 mol}{1.96 mol}=2.5[/tex]
The value of subscript y:
[tex]=\frac{9.79mol}{1.96 mol}=5[/tex]
The value of subscript z:
[tex]=\frac{1.96mol}{1.96 mol}=1[/tex]
The empirical formula of a substance :
[tex]C_{2.5}H_5O_1=C_{\frac{25}{10}}H_5O_1=C_{25}H_{50}O_{10}[/tex]
Reducing to the lowest whole numbers:
[tex]C_{25}H_{50}O_{10}=C_5H_{10}O_2[/tex]
The empirical formula of the substance is [tex]C_5H_{10}O_2[/tex].
Learn more about the empirical formula here:
brainly.com/question/1247523?referrer=searchResults
brainly.com/question/1363167?referrer=searchResults
1 or 2 topics or two lessons should be explained in an illustrated childrens book minimum of 10 pages must have 3 or more sentences
Answer:
Yes because same topic are long
The radius of a platinum atom is 139 pm. How many platinum atoms would have to be laid side by side to span a distance of 1.39 mm?
Answer:
5x10⁶ atoms of platium have to be laid side by side
Explanation:
1 atom of platium has a radius of 139pm = 139x10⁻¹²m. The distance that occupies 1 atom of platinum is 2 times its ratio:
139x10⁻¹²m*2 = 2.78x10⁻¹⁰m
Assuming there is no distance between to atoms of platinum, just its ratio. The amount of atoms necessary to occupy 1.39mm = 1.39x10⁻³m is:
1.39x10⁻³m / 2.78x10⁻¹⁰m =
5x10⁶ atoms of platium have to be laid side by sideEvaporation is commonly used to concentrate dissolved solids in a liquid feed stream and produce pure water vapor.
a. True
b. False
Answer:
True
Explanation:
Evaporation is the process by which a substance changes its state from liquid to gas. evaporation occurs at all temperatures but it's rate increases as temperature increases.
Pure water vapour can be produced by evaporation.
As the liquids are removed, the solids present in solution becomes more concentrated.
¿soy guapo?
si dices que si te doy una galletita
Answer:
Hindi ko po ma gets sinasabi nyu pwedeng pakiayus
Draw a sketch showing what osmotic pressure is. Label on the sketch solute, solvent, hypertonic, hypotonic and semi permeable membrane.
Why do gases act more ideal at
lower pressures?
Answer:
Gases act more ideal at lower pressure beacuse the attractive forces between molecules will decrease or become less significant compared to the empty space between them.
Explanation:
Generally, a gas behaves more like an ideal gas at higher temperature and lower pressure as the potential energy due to intermolecular forces becomes less significant compared with the particles "kinetic energy" and the size of the molecules become less significant compared to the empty space between them.
Attractive forces between molecules, decrease the pressure of a reak gas, slowing the molecules and reducing collisions with the walls.The higher the value of a gas, the greater the attraction between molecules and the more easily the gas will compress.
HOPE IT HELPS MUCHanswered by: John Glenly Pillazo Mahusay
When 2.50 moles of oxygen reacts with excess hydrogen gas how many grams of water is
produced?
2 H2 + O2--> 2 H20
Answer:
90grams
Explanation:
The reaction given in this question is as follows:
2H2 + O2 → 2H20
Based on this equation, 1 mole of oxygen gas (O2) produces 2 moles of water (H2O)
Hence, 2.50moles of oxygen gas will react with excess hydrogen gas to produce (2.5 × 2) = 5.0moles of water.
Using mole = mass/molar mass
Molar mass of water (H2O) = 1(2) + 16
= 18g/mol
5 = mass/18
mass = 18 × 5
mass of H2O = 90grams
All --- is a good conductor of heat
Water has a density of 1.00 g/mL. If you put an object that has a density of 0.79 g/mL into water, it will sink to the bottom.
ANSWER please
True
False
Answer:
False
Explanation:
An object with a density less than the density of water will float.
And an object that is denser than water (more than 1.00g/mL) will sink when placed in water.
Part A: Calculate the mass of butane needed to produce 75.6g of carbon dioxide.
Part B: Calculate the mass of water produced when 5.48g of butane reacts with excess oxygen.
Answer:
Multiply the number of moles of butane by its molar mass, 58.12g/mol, to produce the mass of butane. Mass of butane = 18.8g.
Explanation:
Part B:
The mass of water produced when 4.86 g of butane(C4H10) react with excess oxygen is calculated as below
calculate the moles of C4H10 used = mass/molar mass
moles = 4.86g/58 g/mol =0.0838 moles
write a balanced equation for reaction
2 C4H10 + 13 O2 = 8 CO2 + 10 H2O
by use of mole ratio between C4H10 to H2O which is 2:10 the moles of
H20= 0.0838 x10/2 = 0.419 moles of H2O
mass = moles x molar mass
=0.419 molx 18 g/mol = 7.542 grams of water is formed
Which probing question lies within the scope of physics?
O A.
Are fish in the open ocean
attracted by underwater sounds?
O B.
Does increasing the saltiness of
ocean water affect the speed
of sound in the water?
O C.
What effect does the release of industrial wastewater have on
the acidity of oceans?
D. What is the effect of rising sea temperatures on
ocean currents?
Answer:
answer number C is the correct answer for this
Construction of battery cells
Answer:
These batteries are constructed of several single cells connected in series each cell produces approximately 2.1 volts. ... A battery cell consists of two lead plates a positive plate covered with a paste of lead dioxide and a negative made of sponge lead, with an insulating material (separator) in between.
True/False: Chemical reactions can NOT proceed in the reverse direction
if salt and sand is mixed with distilled water, what will be the residue? and, what will be the filtrate?
Answer:
Filtration is a technique used as a remedy to separate mixes
Explanation:
If you have a sodium, then you will explore that salt dissolves but the sand is still the same.
If the salt in the resin water solution scanners, the sand remains the residue and passes through the filter paper.
All you have to do now is pleasant the salty water so that the water can evaporate, leaving the salt behind.
Match the following terms to their correct definitions.
ResetHelp
A cell that requires energy to bring about a nonspontaneous redox reaction.
An ion-containing conducting medium used to physically and chemically connect the two half-cells in an electrochemical cell.
A cell that requires energy to bring about a nonspontaneous redox reaction.
To move to drop area press Tab key.
faraday
salt bridge
anode
cathode
voltaic cell
electrolytic cell
Answer:
Electrolytic cell. Salt bridge.
Explanation:
Match the following terms to their correct definitions.
A cell that requires energy to bring about a nonspontaneous redox reaction. Electrolytic cell. In an electrolytic cell, energy is provided from an outer source, such as a battery. An ion-containing conducting medium used to physically and chemically connect the two half-cells in an electrochemical cell. Salt bridge. The salt bridge contains a salt (strong electrolyte) and it is fundamental in a voltaic cell.100.0 mL of a 0.780 M solution of KBr is diluted to 500.0 mL. What is the new concentration of the solution?
Give the name of the molecular compound and the name of the aqueous solution for each of the binary compounds below.
a. HCN
b. HF
c. H2S
Explanation:
A compound containing only two elements is called a binary compound.
(a). The compound HCN contains a hydrogen ion and cyanide ion. Hence, the name of HCN is hydrogen cyanide.
An aqueous solution of hydrogen cyanide is known as hydrogen cyanide solution.
(b). The compound HF contains a hydrogen ion and a fluorine ion. The suffix -ide will be added to its name. So, the name of this compound is hydrogen fluoride.
An aqueous solution of HF is known as hydrogen fluoride.
(c). The compound [tex]H_{2}S[/tex] contains two hydrogen atoms and one sulfur atom. The suffix -ide will be added to its name. So, the name of this compound is hydrogen sulfide.
An aqueous solution of this compound is known as hydrogen sulfide solution.
g Calculate the percent yield when you start with 0.50 grams of salicylic acidand end with 0.33 grams of aspirin. The molecular weight of salicylic acid is 138.12 g/mol, and the molecular weight of aspirin is 180.157 g/mol.
Explanation:
hope the picture above helps you to understand:)
What were the advantages for Mendel in using pea plants for his breeding experiments?
Answer:
He chose pea plants because they were easy to grow, could be bred rapidly, and had several observable characteristics, like petal color and pea color.
Explanation:
How many molecules of C 2H 5Br will be present if you had 4.52 g of this compound?
A molecule with the formula AX 4 uses ________ to form its bonds. sp2 hybrid orbitals sp3d hybrid orbitals sp3 hybrid orbitals sp3d2 hybrid orbitals sp hybrid orbitals
Answer:
sp3 hybrid orbitals
Explanation:
The formula of a molecule gives us an idea of its structure and the nature of hybrid orbitals that are involved in the formation of the molecule.
AX4 corresponds to tetrahedral geometry. If a molecule is in tetrahedral geometry, it is most likely sp3 hybridized as usual.
Hence, a molecule with the formula AX 4 uses sp3 hybrid orbitals to form its bonds
What does Gibbs free energy predict?
A. It predicts what the rate of the reaction will be.
B. It predicts how high the activation energy is.
C. It predicts if entropy will increase or decrease.
D. It predicts whether or not a reaction will be spontaneous.
Answer:
It predicts whether or not a reaction will be spontaneous.
Explanation:
The equation;
∆G= ∆H - T∆S enables us to obtain the Gibbs free energy of a chemical process.
The Gibbs free energy value tells us whether a chemical process will be spontaneous or not.
When;
∆G>0 the reaction is not spontaneous
∆G=0 the reaction is at equilibrium
∆G<0 the reaction is spontaneous
You are stowing items and come across an aerosol bottle of hairspray. What should you do? Please choose all that apply
Answer:stow the hairspray
Explanation:
Why ethanol is used in pectin extraction
Explanation:
is responsible for interrupting the interaction between pectins and solvent molecules