On the basis of your knowledge of the reaction of halogens with alkanes, decide which product you would not expect to be formed in even small quantities in the bromination of ethane?
A) BrCH2CH2Br
B) CH3CH2CH2Br
C) CH3CHBr2
D) CH3CH2CH2CH3
E) BrCH2CH2CH2CH2Br

Answer:

d. van der waals force

Explanation:

Van der Waals force :

the weakest intermolecular forceand consist of dipole-dipole force and dispersion force.

Answer:

I don't know what to say . just for points

Answer: There are 20 milliliters of 1.0 M HCl is required to be diluted to make 200 mL of a 0.1 M solution.

Explanation:

Given: [tex]M_{1}[/tex] = 1.0 M,    [tex]V_{1}[/tex] = ?

[tex]M_{2}[/tex] = 0.1 M,    [tex]V_{2}[/tex] = 200 mL

Formula used is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute values into the above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\1.0 M \times V_{1} = 0.1 M \times 200 mL\\V_{1} = \frac{0.1 M \times 200 mL}{1.0 M}\\= 20 mL[/tex]

Thus, we can conclude that there are 20 milliliters of 1.0 M HCl is required to be diluted to make 200 mL of a 0.1 M solution.

Answer:

the fraction of collisions with energy greater than Eact

Explanation:

The activation energy of a reaction stands as a sort of energy barrier between reactants and products. It is only reactants that possesses energy greater than the activation energy that can be converted from reactants to products.

When the temperature of the system is increased, more particles acquire energy greater than the activation energy. Hence, the fraction of collisions with energy greater than the activation energy increases so the rate of reaction increases likewise.

Answer:

Explanation:

1mol of [tex]O_2=2*16{gr\over{mol}}=32{gr\over{mol}}\\\\15.7gr->15.7gr*{1\over{32{gr\over{mol}}}}=0.491mol~of~O_2[/tex]

as 1mol of molecular oxigen reacts with 4 mol of aluminium

1 mol of O2         -----------------------------> 4 mol of Al

0.491 mol of O2  ------------------------------>     x

[tex]x={0.491*4\over{1}}~mol~of~Al=1.9625~mol~of~Al[/tex]

Answer:

Explanation:

Atomicity is defined as the total number of atoms present in a molecule.

Answer:

bent

Explanation:

The molecular formula of sulfur dioxide is written as SO₂

The molecular geometry of sulfur dioxide can be determined using the Lewis structure.

The Lewis structure shows the distribution of electrons around the atoms of a given compound such as sulfur dioxide (SO₂).

In this compound, sulfur is the central atom with 6 valence electrons.

The sulfur is bonded covalently with two oxygen atoms, each with 6 valence electrons. Oxygen contributes 2 lone pairs while sulfur which is the central atom contributes 1 lone pair of electrons in the bond.

The bond angle between the two oxygen atoms and the central sulfur atom is approximately 120⁰, as a result of the bent shape of the molecular structure.

Based on the calculations, the Gibbs's free energy for this chemical reaction is equal to -1,680.906 kJ/mol.

Given the following data:

Gibbs's free energy simply refers to the quantity of energy that is associated with a particular chemical reaction.

Mathematically, the Gibbs's free energy for this chemical reaction can be calculated by using this formula:

ΔG° = ΔH° - ΔS°

Substituting the given parameters into the formula, we have;

ΔG° = -1652 × 10³ - (298 × 0.097)

ΔG° = -1652 × 10³ - 28.906

ΔG° = -1,680.906 kJ/mol.

Read more on Gibbs's free energy here: brainly.com/question/18752494

#SPJ1

Answer: See explanation

Explanation:

The explanation for why solid sodium chloride can't conduct electricity while molten sodium chloride can is explained below:

Ionic compounds that are in their solid state like sodium chloride have their ions fixed in position. Due to this reason, the able to move, therefore we can say that the solid ionic compounds cannot be able to conduct electricity.

On the other hand, ionic compounds in their molten state, are free to flow unlike when they're in their solid state and therefore we can say that molten sodium chloride can be able to conduct electricity.

Answer:

I don't understand the question

Explanation:

1. c

2. c

Answer:

1. b. A = B

2. c. A < B

Explanation:

Consider equimolar samples of different ideal gases at the same volume and temperature. (nA = nB)

Gas A has a higher molar mass than gas B. (MA > MB)

1. We can calculate the pressure using the ideal gas equation.

P = n × R × T / V

Since n, T and V are equal, the pressure of both gases are equal as well.

2. We can calculate the root-mean-square of the velocity using the following expression.

v(rms) = √(3RT/M)

There is an inverse relationship between speed and molar mass. Since A has a higher molar mass, it has a lower speed.

Answer:

Option B. The reaction will shift to the left in the direction of the reactants.

Explanation:

The equation for the reaction is given below:

CO₂ + 2H₂O <=> CH₄ + O₂

Enthalpy change (ΔH) = +890 KJ

The reaction illustrated by the equation is endothermic reaction since the enthalpy change (ΔH) is positive.

Increasing the temperature of an endothermic reaction will shift the equilibrium position to the right and decrease the temperature will shift the equilibrium position to the left.

Therefore, decreasing the temperature of the system illustrated by the equation above, will shift the reaction to the left in the direction of the reactants.

Thus, option B gives the right answer to the question.

Answer:

azertyuiopazertyuiiop

Answer:

hydrogen bonds

Explanation:

similarly CH3OH also has a OH group and H hydrogen thus it will also form h-bonding.

Answer:

C2H4O3

Explanation:

Empirical formula is defined as the simplest whole number ratio of atoms present in a molecule.

To solve this question we need to find the moles of carbon = Moles of CO2, the moles of hydrogen (Using moles of H2O) and the moles of oxygen (Finding the mass of the mass of each atom) as follows:

Moles Carbon -Molar mass CO2: 44.01g/mol-:

33.86g CO2 * (1mol/44.01g) = 0.769 moles CO2 = Moles C * (12g/mol) =

9.23g C

Moles Hydrogen -Molar mass H2O: 18.01g/mol-

13.86g H2O * (1mol/18.01g) = 0.770 moles H2O * (2mol H / 1mol H2O) = 1.54 moles H * (1g/mol) = 1.54g H

Moles Oxygen:

Mass: 29.26g - 9.23g C - 1.54g H = 18.49g O * (1mol/16g) = 1.156 moles O

Dividing each number of moles in the moles of C (Lowe number of moles):

C = 0.769 moles C / 0.769 moles C  = 1

H = 1.54 moles H / 0.769 moles C = 2

O = 1.156 moles O / 0.769 moles C = 1.5

As the number must be a whole number each ratio twice:

C = 2

H = 4

O = 3

Empirical formula is:

Answer:

NH3 Ammonia

Explanation:

Ammonia has 4 regions of electron density around the central nitrogen atom (3 bonds and one lone pair). These are arranged in a tetrahedral shape. The resulting molecular shape is trigonal pyramidal with H-N-H angles of 106.7°.

Answer:

21.63 %

Explanation:

The molar mass of Mn₃[Mn(CO)₄]₃ is 665.64 g/mol.

Let's assume we have 1 mol of Mn₃[Mn(CO)₄]₃, if that were the case then we would have 665.64 grams.

There are 12 C moles per Mn₃[Mn(CO)₄]₃, with that in mind we calculate the weight of 12 C moles:

Finally we calculate the mass percent of carbon:

Answer:

a. [tex]Ag^0[/tex]

b. [tex]Ag^{+}[/tex]

c. [tex]Ca^{2+}F_2^-[/tex]

d. [tex]H_2^+S^{2-}[/tex]

e. [tex](C^{4+}O_3^{2-})^{-}[/tex]

f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]

g. [tex]Cl_2^0[/tex]

h. [tex]Fe^0[/tex]

i. [tex]Cu^{2+}Cl_2^-[/tex]

j. [tex]C^{4-}H_4^+[/tex]

Explanation:

Hello there!

In this case, according to the concept of charge balance, which tell us that the overall charge is zero for any compound, except ions, it turns out possible to proceed as follows:

a. [tex]Ag^0[/tex]

b. [tex]Ag^{+}[/tex]

c. [tex]Ca^{2+}F_2^-[/tex]

d. [tex]H_2^+S^{2-}[/tex]

e. [tex](C^{4+}O_3^{2-})^{-}[/tex]

f. [tex](Cr^{6+}O_4^{2-})^{2-}[/tex]

g. [tex]Cl_2^0[/tex]

h. [tex]Fe^0[/tex]

i. [tex]Cu^{2+}Cl_2^-[/tex]

j. [tex]C^{4-}H_4^+[/tex]

Keep in mind lonely elements have 0 as their oxidation state.

Regards!

Answer:

1.433g of HgS are produced

Explanation:

A Solution Containing 2.0 Grams Of Hg(NO3)2 Was Added To A Solution Containing 2.0 Grams Of Na2S. Calculate the mass of the HgS that was formed (it is a precipitate) according to this reaction:

Based on the reaction:

Na2S + Hg(NO3)2 → HgS + 2NaNO3

To solve this question we need to find the moles of each reactant in order to find the limiting reactant. The moles of limiting reactant = moles of HgS:

Moles Na2S -Molar mass: 78.0452 g/mol-

2.0g * (1mol / 78.0452g) = 0.0256 moles Na2S

Moles Hg(NO3)2 -324.7g/mol-

2.0g * (1mol / 324.7g) = 0.006159 moles Hg(NO3)2

As the reaction is 1:1, and moles of Hg(NO3)2 < moles Na2S

The moles of Hg(NO3)2 = Moles HgS = 0.006159 moles

The mass is:

Mass HgS -Molar mass: 232.66g/mol-:

0.006159 moles * (232.66g/mol) =

Answer:

0.64 m

Explanation:

Given that;

1L = 0.001 cubic metre

Then;

263 L = 263 L × 0.001 cubic metre/1L

= 0.263 cubic metre

Volume of a cube = l^3

l= 3√V

l= 3√0.263 cubic metre

l= 0.64 m

Answer:

hexane

I hope it's helps you

Answer:

Alkaline earth metals or akali metals

Answer:

b. glass and charcoal

Explanation:

Step 1: Given data

Step 2: Determine which material will float in molten lead

Density is an intrinsic property of matter. Less dense materials float in more dense materials. The materials whose density is lower than that of lead and will therefore float on it are glass and charcoal.

Answer: If matter goes through a chemical change then the physical properties are not likely to stay the same.

Explanation:

When chemical composition of a substance changes during a chemical reaction then it is called a chemical change.

Chemical change always leads to the formation of new substances. Properties like chemical reactivity, combustion, rusting etc are chemical changes.

For example, [tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]

Here, [tex]NH_{3}[/tex] will have different chemical as well as physical properties as compared to [tex]N_{2}[/tex] and [tex]H_{2}[/tex].

As physical properties are the properties that cause change in state of a substance.

Properties like boiling point, state of substance etc are physical properties.

Thus, we can conclude that if matter goes through a chemical change then the physical properties are not likely to stay the same.

Answer:

E°(Ag⁺/Fe°) = 0.836 volt

Explanation:

3Ag⁺ + 3e⁻ => Ag°;            E° = +0.800 volt

Fe° => Fe⁺³ + 3e⁻ ;             E° = -0.036 volt

_________________________________

Fe°(s) + 3Ag⁺(aq) => Fe⁺³(aq) + 3Ag°(s) ...    

E°(Ag⁺/Fe°) = E°(Ag⁺) - E°(Fe°) = 0.800v - ( -0.036v) = 0.836 volt

Answer:

2.89x10⁻⁵M = [HPO₄²⁻]

Explanation:

The equilibrium of H3PO4 in water occurs H2PO4-:

H3PO4(aq) + H2O(l) ⇄ H3O⁺(aq) + H2PO4⁻(aq)

pKa = 2.16. And as pKa = -log Ka; Ka = 10^-2.16

Ka = 6.9183x10⁻³ = [H3O⁺] [H2PO4⁻] / [H3PO4]

As both [H3O⁺] and [H2PO4⁻] comes from the same equilibrium,

[H3O⁺]=[H2PO4⁻] :

[H3O⁺] = X

[H2PO4⁻] = X

[H3PO4] = 0.042 - X

Where X is reaction coordinate

Replacing:

6.9183x10⁻³ = [X] [X] / [0.042 - X]

6.9183x10⁻³ = X² / 0.042 - X

2.905686x10⁻⁴ - 6.9183x10⁻³X - X² = 0

Solving for X:

X = -0.02M. False solution. There is no negative concentration.

X = 0.014M. Right solution

[H2PO4⁻] = 0.014M

In the second equilibrium:

H2PO4⁻(aq) + H2O(l) ⇄ HPO4-(aq) + H3O+(aq)

Based on the same principles of the last equilibrium:

pKa2 = 7.21

Ka2 = 6.166x10⁻⁸ = [HPO4-] [H3O+] / [H2PO4⁻]

[HPO4-] = X

[H3O+] = X

[H2PO4⁻] = 0.014M - X

6.166x10⁻⁸ = X² / [0.014M - X]

8.3623x10⁻¹⁰ - 6.166x10⁻⁸X - X² = 0

Solving for X:

X = -0.0000289485. False solution.

X =

Answer:

1.04 g/mL

Explanation:

Applying,

D = (m-m')/V................. Equation 1

Where D = Density of the unknown liquid, m = mass of the pycnometer when filled with unkwon liquid, m' = mass of the empty pycnometer, V = volume of the empty pycnometer

From the question,

Assuming the mass are in grams

Given: m = 20.1 g, m' = 10.3 g, V = 9.4 mL

Substitute these values into equation 1

D = (20.1-10.3)/9.4

D = 9.8/9.4

D = 1.04 g/mL

Answer:

highest boiling point.

Explanation:

Hello there!

In this case, according to the given information, it turns out necessary for us to recall the definition of colligative properties, more specifically that of boiling point elevation, defined in terms of the temperature change, van't Hoff's factor, molality of the solution and boiling point elevation constant:

[tex]\Delta T_b=i*m*K_b[/tex]

In such a way, since all the given solutions have the same molality and solvent (water), they all have the same m and Kb, for which we focus on the van't Hoff's factor which is 1 for CH2O (nonionizing), 2 for NaCl (Na and Cl ions are released), 2 for HF (H and F ions are released) and 3 for AlCl₃ (one Al and three Cl ions are released).

Therefore, since D. 0.50 mol AICI, in 1.0 kg water  has the greatest van't Hoff's factor, we infer it has the highest boiling point.

Regards!