the capillary action, the tops of plants are supported by little tubes. In a tube with a diameter of 0.005 mm and a height of 70.8 m, a water solution will rise due to the capillary effect.
Given,
tube diameter ,D= 0.005 mm
contact angle, Ф=20°
density of water ,ρ=998.21 kg/m³
the surface tension of water at 20° C,σ[tex]_{s}[/tex]=0.073 N/m
radius of capillary tube ,R=D/2
R=0.005/2
= 0.0025 mm
R=2×10⁻⁶ m
capillary raise is given by
h=(2σ[tex]_{s}[/tex]/PgR)cosФ
=(2(0.073 N/m)/(998.21 kg/m³)(9.81m/s²)(2×10⁻⁶m))cos20°
h=70.8m
∴The capillary rise is h=70.8m
Capillary effect, also known as capillary action or wicking, is the ability of a liquid to flow against gravity in narrow spaces due to the interaction between the liquid and the surface of the container it is in. The height that the liquid can rise is dependent on the diameter of the tube or material it is in, the properties of the liquid, and the properties of the container. Capillary action is important in many natural and technological processes, such as plant water uptake, inkjet printing, and the functioning of some medical devices.
Learn more about capillary effect here:
https://brainly.com/question/5807320
#SPJ4
How much energy (in kJ) is required to heat 100.0 g H2O from a liquid at 76°C to a gas at 132°C?
249. 43 KJ much energy is required to heat 100.0 g H₂O from a liquid at 76°C to a gas at 132°C.
What is energy?The ability to work is defined as energy. The SI symbol for energy is Joule (J). The different types of energy include thermal energy, chemical energy, electrical energy, light energy, potential energy, kinetic energy, and heat energy. Chemical energy is defined as the power that is held inside chemical compound bonds (molecules and atoms). An exothermic reaction, in which it is released during a chemical reaction, primarily results in the production of heat as a byproduct.
Given that,
mass = 100 gm
c = 4.1843 J/C g
as we know,
q₁ = m × c × ΔT
here, q₁ = heat required to warm water
thus,
or, q₁ = 100 × 4.1843 × (132 - 76)
or, q₁ = 23430 J
Next, q₂ = m × ΔH (vap)
here, q₂ = heat required to vaporize the water
q₂ = 100 × 2260 [As ΔH (vap) = 2260 J/g]
q₂ = 22600 J
Now, energy required (Q) = q₁ + q₂
or, Q = (23430 + 22600) J
or, Q = 249430 J
or, Q = 249.43 KJ
249. 43 KJ much energy is required to heat 100.0 g H₂O from a liquid at 76°C to a gas at 132°C.
To know more about heat refer to:
https://brainly.com/question/25603269
#SPJ1
1995 D Two reactions are represented above. The potential energy diagram for reaction 1 is shown. The potential energy of the reactants in reaction 2 is also indicated on the diagram. Reaction 2 is endothermic, and the activation energy of reaction 1 is greater than that of reaction 2.
The diagram shows the potential energy of both reactions. The reactants of reaction 1 have a lower potential energy than those of reaction 2, indicated by the lower starting point on the graph.
What is potential?Potential is the capacity or ability to become or develop into something in the future. It can refer to physical, mental, or spiritual power and potential. Potential is often seen as untapped or unused and can be developed through effort and determination. Potential is also seen as the ability for growth and development, and the potential for a person or thing to reach its fullest potential. Potential can be seen as the capacity to do something, even if it has yet to be realized. It is often seen as a measure of one's potential for future success or achievement.
Reaction 1 has a higher activation energy, indicated by the greater distance between the reactants and products. This means that reaction 1 requires more energy to proceed than reaction 2, making it an endothermic reaction.
To learn more about potential
https://brainly.com/question/14427111
#SPJ1
The diagram shows !
energy changes for a reaction pathway.
Potential Energy
Reaction Pathway
Part 1: Describe how you can determine the total change in enthalpy and activation energy
diagram, and if each is positive or negativo.
Part 2: Describe how the curve will look if the reaction was exothermic. Be sure to mention changes in the potential energies of the reactants and products and the sign changes of the enthalpy.
The difference between the highest point on the reaction profile and the energy of the reactants is the activation energy of the reaction.
What is a potential energy diagram?The energy change between the reactants and the products is shown by a potential energy diagram or a reaction profile.
Looking at the reaction profile, we can see that the products have more energy than the reactants, indicating that the reaction is endothermic. By subtracting the energy of the products from the energy of the reactants, the enthalpy change is obtained.
Thus, The activation energy of the reaction is the difference between the highest point on the reaction profile and the energy of the reactants.
To learn more about the potential energy diagram, follow the link;
https://brainly.com/question/12078312
#SPJ9
Your question is incomplete, the image of energy diagram is attached below
Select factors that will change when additional A is added...Select the factors that will change when additional A is added to a system at equilibrium. Select the factors that will change when additional A(g) is added to the following system at equilibrium. Overall Reaction: A(g) + B(g) 2C(g)
When additional A(g) is added to the following system at equilibrium, the actors that will change are pressure, temperature, reaction rate and concentration.
Concentrations of A, B, and C: The concentration of A will increase, while the concentrations of B and C will decrease. The extent of the changes will depend on the stoichiometry of the reaction and the equilibrium constant.
Pressure: The addition of A(g) will increase the pressure of the system, assuming the volume is constant. This may cause a shift in the equilibrium position to favor the side with fewer moles of gas, which in this case is the reactant side.
Temperature: The addition of A(g) may cause a temperature change in the system. If the reaction is exothermic, the addition of A(g) will increase the temperature of the system and may cause a shift in the equilibrium position to favor the reactants. If the reaction is endothermic, the addition of A(g) will decrease the temperature of the system and may cause a shift in the equilibrium position to favor the products.
Reaction rate: The addition of A(g) may temporarily increase the rate of the forward reaction, but the system will eventually reach a new equilibrium position with the same equilibrium constant.
To know more about equilibrium here
https://brainly.com/question/11336012
#SPJ4
place where bonds can form between adjoining phospholipids nonpolar group that avoids water place to attach another small charged molecule place to attach fatty acids negative charge to interact with water
The functional features which the phosphate group contribute to the structure of a phospholipid are:
place to attach another small charged molecule negative charge to interact with waterAbout PhospholipidPhospholipids are derivatives of lipid compounds that contain a phosphate ester group. This compound is one of the building blocks of living cell membranes, along with glycolipids, cholesterol, and proteins. Phospholipids contained in cell membranes belong to the type of phosphoglycerides, which are alcohol and phosphatidic derivatives.
Phospholipid characteristicsThe characteristics of phospholipids are as follows.
It consists of two layers, a hydrophobic layer on the tail and a hydrophilic layer on the head. Has a phosphoric acid group. Having more than one head cluster. The tail is composed of hydrocarbon compounds. Bound to two fatty acids. The tails will face each other, with the head on the outside.Your question is incomplete but most probably your full question was:
What functional features does the phosphate group contribute to the structure of a phospholipid?
nonpolar group that avoids waternegative charge to interact with waterplace where bonds can form between adjoining phospholipidsplace to attach another small charged moleculeplace to attach fatty acidsLearn more about phosphate group at https://brainly.com/question/8622136
#SPJ4
A 100 g block of a substance requires 0.5 kJ of heat to raise its temperature from 25.0°C to 63.5°C. What is the substance?
Gold is the substance. A substance is any material that has physical qualities. The phrase can also refer to the essence or central concept of anything.
By substance, what do you mean?A substance is a material that has specific qualities and a specific composition. A substance is any unadulterated element or pure composite. By using any physical technique, a substance cannot be separated. A pure substance has fixed properties/composition.
What exactly are substance and example?Matter with a definite composition and set of characteristics is referred to as a substance. A substance is every pure element. It is a material when it is pure. Substance examples: Because iron is an element, it is also a substance.
To know more about Substance visit:
https://brainly.com/question/24372098
#SPJ1
which of the following is a false statement concerning amino groups?group of answer choicesthey are basic in ph.they are nonpolar.they contain nitrogen.they are found in amino acids.
The false statement concerning amino groups are nonpolar.
What is meant by amino groups?Nitrogen and hydrogen are the two components that make up an amino group. The chemical composition of an amino group is NH2. A single covalent link holds the N-H atoms in this functional group together.
Amines are substances and functional groups in chemistry that have a nitrogen atom that is basic and has a lone pair. Amines are technically ammonia derivatives in which one or more hydrogen atoms have been swapped out for a substituent, like an alkyl or aryl group.
A specific kind of functional group called an amino group is made up of one nitrogen and two hydrogens that are joined by a single covalent link. The chemical structure of the amino group is NH2.
Therefore, the correct answer is option D) They are nonpolar.
The complete question is;
Which of the following is a false statement concerning amino groups?
A) They are basic in pH.
B) They are found in amino acids.
C) They contain nitrogen.
D) They are nonpolar.
E) They are components of urea.
To learn more about amino groups refer to:
https://brainly.com/question/1302816
#SPJ4
PLEASE HELP??!!!!
All you need to answer the question is on the picture!
The airplane was traveling 100 mph for one hour, but it encountered a north wind of 35 miles per hour then the displacement of the airplane is 117.09 km.
What is displacement ?
Displacement is defined as a change in an object's position. It is a vector quantity with a magnitude and a direction. It is represented by an arrow pointing from the starting point to the ending point. For instance, if an object moves from A to B, the object's position changes.
Let, Displacement = AC
Distance = AB + BC
By Pythagoras theorem,
AC = √ 100² + 56.32²
= √ 13711.94
Displacement = 117.09 km
Distance = AB + BC
= 100 + 56.32
= 156.32 km
Thus, the displacement of the airplane is 117.09 km.
To learn more about the displacement, follow the link;
https://brainly.com/question/30087445
#SPJ1
A 400 mL sample of a 0.100 M formate buffer, pH 3.75, is treated with 6 mL of 1.00 M KOH. What is the pH following this addition? (pKa for formic acid is 3.75)
Express your answer to two decimal places.
The pH of A 400 mL sample of a 0.100 M formate buffer, pH 3.75, is treated with 6 mL of 1.00 M KOH is 4.88
pH buffer = 3.75
pKa for formic acid is 3.75
Using Henderson-Hasselbalch equation for formate buffer:
pH = pKa + log [ HCOO⁻]
[HCOOH]
Input values in above equation
3.75 = 3.75 + log [ HCOO⁻]
[HCOOH]
log [ HCOO⁻] = 0
[HCOOH]
[ HCOO⁻] = 1
[HCOOH]
[ HCOO⁻] = [HCOOH]
Concentration of formate buffer = 0.100 M
[ HCOO⁻] - [HCOOH] = 0.100 M
[ HCOO⁻] = [HCOOH] = 0.05 M
As a result, the buffer's volume is the same. As a result, the concentration is calculated as the number of moles of both formate ions and formic acid.
Then we should calculate the number of moles for given molarity
Molarity of solution = moles of solute x 1000
volume of solution in mL
1M KOH = moles of KOH x 1000 = 0.006 moles
6 mL
The chemical reaction for formic acid and KOH follows the equation:
HCOOH +KOH ⇒ HCOO⁻ +H₂O
initial 0.05 0.006 0.05
final 0.041 - 0.056
Volume of solution = 400 + 6 = 406 mL = 0.406 L
We use the Henderson Hasselbalch equation to determine an acidic buffer's pH:
pH = pKa + log [ HCOO⁻]
[HCOOH]
[ HCOO⁻] = 0.056 =
0.406
[ HCOOH] = 0.041
0.406
pH = 3.75 + log [ HCOO⁻]
[HCOOH]
pH = 3.75+ log [0.056/ 0.406]
[ 0.041/ 0.406]
pH = 4.88
Learn more about pH at https://brainly.com/question/19554913
#SPJ4
for each compound, select all the descriptions that apply. compound a: an alkene is bonded to a triple bond. compound a is: conjugated a diene a triene nonconjugated compound b: three alkenes. alkenes 1 and 2 are bonded together via a single bond. alkenes 2 and 3 are bonded together via a single bond. compound b is: conjugated nonconjugated a diene a triene compound c: two triple bonds are bonded together via a c h 2 group. compound c is: nonconjugated a diene a triene conjugated compound d: an akene is bonded to a carbonyl which is bonded to a methyl group. compound d is: a diene conjugated nonconjugated a triene
Consequently, each of the following compounds is conjugated with a diene: compound a; conjugated with a trine; compound c; and conjugated with a diene: compound d.
Why is CH3 called methyl?When one hydrogen atom is taken out of an alkane, a group of atoms known as an alkyl group is created. The group is given a name by changing the parent hydrocarbon's -ane suffix to -yl. For instance, the -CH3 group, which is also known as a methyl group, is created when one hydrogen atom is removed from methane (CH4). In organic chemistry, a methyl group is an alkyl produced from methane that has the chemical formula CH3, one carbon atom bound to three hydrogen atoms. The group's name is frequently shortened to Me in formulas. In numerous organic molecules, this hydrocarbon group can be found. In most compounds, the group is extremely stable.
What is a methyl and ethyl?Methyl has a carbon atom and three hydrogen atoms, whereas ethyl has two carbon atoms and five hydrogen atoms. As a result, the ethyl group has a higher molar mass than the methyl group. Alkane ethane is the source of methyl, while alkane methane is the source of ethyl. 3-Methylpentane is the IUPAC name for the substance in question. It has a lengthy chain of 5 carbon atoms, which gives it the prefix pent-, and a single bond is what gives it the postfix -ane (alkane). Given that the methyl group is present at the third carbon, it is 3-methylpentane.
To know more about Methyl and Ethyl visit:
https://brainly.com/question/29589700
#SPJ4
CAN SOMEONE HELP WITH THIS QUESTION?✨
The number of moles of an element or a compound is the ratio of its given mass by atomic mass or molar mass. Here, the number of moles in 270 g of copper chloride is 2.008 moles.
What is one mole ?Any substance containing 6.02× 10²³ atoms is called one mole of that substance. This number is called Avogadro number. Hence, one mole every element contains Avogadro number of atoms. Similarly one mole of every compounds contains Avogadro number of molecules.
The mass of one mole of an element is called its atomic mass. Then mass of one mole of a compound is called molar mass of the compound.
given molar mass of copper chloride = 134.45 g/mol
given mass = 270 g.
if 134.45 g is the mass of one mole, then , number of moles in 270 g is:
n = given mass/ molar mass
= 270 g/134.4 g/mol = 2.008 moles.
Therefore, the number of moles of copper chloride in 270 g is 2.008 moles.
Find more on molar mass:
https://brainly.com/question/22997914
#SPJ1
A chemical system that results from a chemical reaction has two important components among others in a blend. The joint distribution describing the pro- portions X1 and X2 of these two components is give by f(X1,X2)= 6 X2, 0
A)The marginal distribution of X2 can be obtained by integrating the joint distribution over the range of X1: f(x1) = ∫f(x1, x2)dx2, for 0 < x1 < 1
B)The marginal distribution of X1 can be obtained by integrating the joint distribution over the range of X2: f(x2) = ∫f(x1, x2)dx1, for 0 < x2 < 1
C)The probability that X1 < 0.2 and X2 > 0.5 is given by the joint probability: P(X1 < 0.2, X2 > 0.5) = ∫∫f(x1, x2)dx1dx2, for 0 < x1 < 0.2 and 0.5 < x2 < 1
D)The probability that component proportions produce the results X1 < 0.2 and X2 > 0.
Since the joint distribution is non-zero only when x1 < x2, the limits of integration for x1 are from 0 to x2. Thus, we have:
f(x2) = ∫2dx1, from 0 to x2
= 2x2, for 0 < x2 < 1
The marginal distribution of X2 is a uniform distribution between 0 and 1 with a density of 2x2.
Since the joint distribution is non-zero only when x1 < x2, the limits of integration for x2 are from x1 to 1. Thus, we have:
f(x1) = ∫2dx2, from x1 to 1
= 2(1-x1), for 0 < x1 < 1
The marginal distribution of X1 is a linearly decreasing function between 0 and 1 with a density of 2(1-x1)
The given question is incomplete, the complete question is
A chemical system that results from a chemical reaction has two important components among others in a blend. The joint distribution describing the proportion X1 and X2 of these two components is given by f(x1,x2)= {2, 0 < x1 < x2 < 1, 0, elsewhere (a) Give the marginal distribution of X2. (b) Give the marginal distribution of X1. (e) What is the probability that component proportions produce the results X1 < 0.2 and X2 > 0.5? (d) Give the conditional distribution fx|x2(x1|x2). (e) What is the probability that proportion X1 is less than 0.5 given that X2 is 0.7?
To know more about marginal distribution here
https://brainly.com/question/13127182
#SPJ4
Which of the following is a balanced equation for the reaction of aluminum, Al, and hydrochloric acid, HCl, to form aluminum chloride, AlCl3, and hydrogen, H2?
a. Al + 3 HCl → AlCl₃ + H₂
b. Al + 6 HCl → AlCl³ + 3 H₂
c. 2 Al + 6 HCl → 2 AlCl₃ + 3 H₂
d. Al + 6 HCl → 2 AlCl₃ →3 H₂
The balanced equation for the reaction of aluminum, Al, and hydrochloric acid, HCl, to form aluminum chloride, AlCl3, and hydrogen, H2 is Al + 3 HCl → AlCl₃ + H₂. hence, the correct option is (a).
This equation shows that 1 mole of aluminum reacts with 3 moles of hydrochloric acid to produce 1 mole of aluminum chloride and 1 mole of hydrogen gas. The coefficients on both sides of the equation are balanced, indicating that the law of conservation of mass is satisfied. In order to satisfy the law of conservation of mass, a chemical equation must be balanced, which means that the number of atoms of each element must be the same on both sides of the equation. The coefficients in front of each compound or element indicate how many moles of that substance are involved in the reaction. By adjusting the coefficients in the equation, we can balance the number of atoms of each element and ensure that the total mass of the reactants equals the total mass of the products.
To know more about reaction please refer: https://brainly.com/question/4482869
#SPJ4
importance of PH in Pharmactical Practices
pH affects the solubility of the molecule, which determines the stability of pharmaceuticals, the biological tolerability of the formulation, and the activity of the molecule, pH is a crucial element for all drugs manufactured in aqueous liquid forms.
Why pH is important ?A solution's pH is a significant indicator of its chemical composition. The pH may impact how readily available nutrients are, how biological processes work, how bacteria behave, and how chemicals behave.
The negative base-10 log of the hydronium ion concentration in a solution is the usual definition of pH value.
In the pharmaceutical sector, we're accustomed to concentrations of little more than 1M under typical circumstances. That being stated, the pH value in that situation may be between two extremes.
Thus, pH is important in Pharmaceutical Practices.
To learn more about the pH, follow the link;
https://brainly.com/question/15289741
#SPJ9
How many atoms are in 9.8 moles of carbon?
9.8 moles of carbon contain about 5.88 x 1024 atoms.
What is atom?The fundamental building components of matter are atoms. They are an element's tiniest particles that yet exhibit its chemical and physical characteristics. Protons, neutrons, and electrons are the three subatomic particle types that make up an atom.
How do you determine it?We must utilize Avogadro's number, or around 6.022 x 1023 atoms per mole, to calculate the number of atoms in 9.8 moles of carbon.
Number of atoms = Avogadro's number x the number of moles
As a result, 9.8 moles of carbon have the following number of carbon atoms:
9.8 moles × 6.022 x 1023 atoms/mole equals the number of atoms.
Atom count is 5.88 x 1024 atoms.
Therefore, 9.8 moles of carbon contain about 5.88 x 1024 atoms.
To know more about atom, visit:
https://brainly.com/question/14248889
#SPJ1
which of the following correctly expresses energy in terms of planck's constant? select all that apply. multiple select question. e
Energy in terms of Planck's constant can be expressed by the equation: E = hν or E = hc/λ, where E, h, ν, c and λ represent energy, Planck's constant, frequency, speed of light and wavelength, respectively.
How does energy relate to Planck's constant?The result of multiplying energy by time, or action, is the dimension of Planck's constant. Therefore, the definition of Planck's constant as the fundamental quantum of activity is common.
What formula employs the Planck constant?The Planck-Einstein relation, which establishes Planck's constant, has the following form: E = hf. Here, E denotes the energy of each light packet (or "quanta") in Joules, f is the frequency of light in hertz, and h, of course, denotes Planck's constant.
To learn more about Planck's constant visit:
brainly.com/question/27389304
#SPJ1
Which of the following transitions in the hydrogen atom would result in the emission of a photon with the longest wavelength? How do you know?a. n = 1 to n = 2 b. n = 3 to n = 1 c. n = 2 to n = 1 d. n = 4 to n = 3 e. n = 1 to n = 4
The transition that would result in the emission of a photon with the longest wavelength is from n = 4 to n = 3 (Option d).
This is because the energy of a photon is inversely proportional to its wavelength. According to the Rydberg formula, the energy of a photon emitted or absorbed during a transition in a hydrogen atom is given by:
[tex]E = Rh[(1/n_1^2) - (1/n_2^2)][/tex]
where Rh is the Rydberg constant, n1 and n2 are the initial and final quantum numbers of the electron, respectively.
As we move from higher to lower energy levels, the difference in energy levels decreases, resulting in a longer wavelength for the emitted photon. In this case, the transition from n = 4 to n = 3 involves a smaller energy difference than the other transitions given, resulting in the longest wavelength for the emitted photon.
Therefore, the correct answer is option d, n = 4 to n = 3.
Learn more about Rydberg constant :
https://brainly.com/question/17753747
#SPJ4
When a solution is diluted, the O concentration of solute remains unchangcd O volume of solution rcmains unchanged O amount of solvent remains unchanged O amount of solute remains unchanged
When a solution is diluted, the volume of the solution increases, while the amount of solvent remains unchanged. Option c is the correct answer.
When a solution is diluted, the concentration of solute decreases, while the amount of solute remains unchanged. This is because the amount of solute dissolved in the solution does not change when additional solvent is added, but the volume of the solution increases.
As a result, the concentration of the solute in the solution decreases. The volume of the solution increases, while the amount of solvent remains unchanged.
To know more about the solvent, here
brainly.com/question/15212814
#SPJ4
--The complete answer is, When a solution is diluted, the
a. concentration of solute remains unchanged
b. volume of solution remains unchanged
c. amount of solvent remains unchanged
d. amount of solute remains unchanged--
Which of following compounds can be converted into a cyclic acetal upon treatment with ethylene glycol and an acid catalyst (and removal of water)? Select all that apply. А B OH с os D OH D о ОН E OCH, F H
After being treated with ethylene glycol and an acid catalyst, A, C, D, and E can be transformed into a cyclic acetal (and removal of water).
Compounds B, D and E contain the necessary carbonyl groups to form the acetal. Compound A contains an alcohol group, which can be converted into a carbonyl group by oxidation. Compound F does not contain any carbonyl groups and cannot be converted into a cyclic acetal.A cyclic acetal is an organic compound with a three atom ring containing two oxygen atoms connected by a single bond and an oxygen-alkyl group connected by a double bond. It is a type of cyclic ether and is produced from the reaction of an alcohol with an aldehyde. The reaction involves the formation of a hemiacetal, which then undergoes a dehydration reaction to form the cyclic acetal. The ring structure of the cyclic acetal makes it more stable than the open-chain acetal, allowing it to be used as a protecting group in organic synthesis.
learn more about cyclic acetal Refer:brainly.com/question/15408227
#SPJ4
Practice
If G = green and g = purple, how many offspring will be
purple if the parents' genotypes are gg and
In the text boxes, write the percentage of offspring that is green and
the percentage that is purple.
6GB
g g
Gg
G Gg
ggggg
Green
Purple
The percentage of purple offspring and green offspring are 25% and 25% respectively.
What is offspring?Offspring are living creatures' young creations, generated either from a single organism as well as, inside the event of sexual reproduction, by two organisms. In a broader sense, collective children may be referred to by the term brood or progeny.
This can apply to a group of children born at the same time, such as chicks hatching from a single clutch of eggs, or to the entire offspring, as in the case of the honeybee.
purple offspring = 25%
green offspring = 25%
Therefore, the percentage of purple offspring and green offspring are 25% and 25% respectively.
To learn more about offspring, here:
https://brainly.com/question/10021635
#SPJ9
Your question is incomplete but most probably your full question was,
If G = green and g = purple, how many offspring will be purple if the parents' genotypes are gg and write the percentage of offspring that is green and the percentage that is purple. 25%, 35%,45%
An aqueous solution of Ca(OH)2 at 25 oC has a pH of 12.4. Assume Ca(OH)2 fully dissociates. Calculate the concentration (in M) of Ca(OH)2. Report to 3 decimal places.
Answer:
the first one may be more complex so the second one will be simplified :)
Explanation:
Fill in the words to complete the steps in the process of recrystallization: 1. Dissolve a substance in a Choose .- amount of hot solvent 2. Allow the solvent to cool, precipitating the Choose_= while Choose ._ remain in solution. Choose . the mixture to collect the pure substance
The steps in the process of recrystallization are as follows:
A. Dissolve a substance in a minimal amount of hot solvent'
2. Allow the solvent to cool, precipitating the substances while impurities remain in solution.
3. Filter the mixture to collect the pure substance.
What do you mean by recrystallization?Recrystallization is a method in chemistry for cleaning up compounds. One of the desired compounds or the impurities can be extracted from the solution, leaving the other behind, by dissolving a combination of a chemical and impurities in a suitable solvent.
The crystals that frequently form when the chemical precipitates out gave it its name.
Thus, The natural expansion of bigger ice crystals at the cost of smaller ones is another definition of recrystallization.
Learn more about recrystallization here:
brainly.com/question/15703840
#SPJ1
Compare the water hardness of the following three solutions as mg of calcium ions in 1 liter of water and answer the following questions: Solution A: 25 mg Solution B: 100 mg Solution C: 200 mg -According to the water hardness labels from EPA, Solution B is considered as ✓ [ Select ] very hard hard soft moderately hard < Et to see the highest conductivity value? [Select] Compare the water hardness of the following three solutions as mg of calcium ions in 1 liter of water and answer the following questions: Solution A: 25 mg Solution B: 100 mg Solution C: 200 mg - According to the water hardness labels from EPA, Solution B is considered as [ Select] -Which solution will you expect to see the highest conductivity value [Select ] Solution B Solution All solutions should be the same Solution
The solution C has the highest water hardness, measured in milligrammes of calcium ions per litre of water.
Soft water is defined as having a calcium ion level lower than 60 mg/L. And if this occurs between 60 mg/L and 120 mg/L, it is considered moderately hard, between 120 mg/L and 180 mg/L, it is considered hard, and over 180 mg/L, it is considered very hard.
1. Since solution B contains 100 mg, it will be considered MODERATELY HARD.
2. Generally speaking, the conductivity value increases with ion concentration in a solution. Calcium ion concentration is thus highest in solution C. So the answer will be SOLUTION C.
Water hardness is a measure of the amount of dissolved minerals, such as calcium and magnesium, in water. Hard water can cause problems with soap lathering, scaling, and corrosion in pipes and appliances.
Learn more about water hardness here:
https://brainly.com/question/13161362
#SPJ4
a homopolymer of lysine residues (polylysine) can adopt an alpha-helical conformation or a random coil conformation depending on the ph of the solution. predict whether the conformation of polylysine would be a-helical or random coil at a ph of 1, 7, and 11.choose a total of three answers. choose either helix or random coil for ph 1, ph 7, and ph 11.
The three correct options are pH 1 - random coil, pH 7 - helix and pH 11 - random coil.
At a pH of 1, the solution is acidic and the lysine residues will be mostly positively charged. The positive charges on the amino groups can lead to repulsion between neighboring lysine residues, making it energetically unfavorable for the polymer chain to adopt an alpha-helical conformation. Therefore, at a pH of 1, the conformation of polylysine is likely to be a random coil.
At a pH of 7, which is close to the physiological pH of most living organisms, the amino and carboxyl groups in lysine residues are mostly neutral, allowing the polymer chain to adopt a more stable alpha-helical conformation.
At a pH of 11, the solution is basic and the lysine residues will be mostly negatively charged. This can lead to repulsion between neighboring lysine residues and prevent the formation of an alpha-helical conformation. Therefore, at a pH of 11, the conformation of polylysine is likely to be a random coil.
Learn more about polymer chain :
https://brainly.com/question/25653479
#SPJ4
The complete question is :
A Homopolymer Of Lysine Residues (Polylysine) Can Adopt An Alpha-Helical Conformation Or A Random Coil Conformation Depending On The PH Of The Solution. Predict Whether The Conformation Of Polylysine Would Be Alpha-Helical Or Random Coil At A PH Of 1, 7, And 11. (Choose A Total Of THREE Answers. Choose Either Helix Or Random Coil For PH 1, PH 7, And PH
A homopolymer of lysine residues (polylysine) can adopt an alpha-helical conformation or a random coil conformation depending on the pH of the solution. Predict whether the conformation of polylysine would be alpha-helical or random coil at a pH of 1, 7, and 11. (Choose a total of THREE answers. Choose either helix or random coil for pH 1, pH 7, and pH 11).
options:
pH 1 - helix
pH 1 - random coil
pH 7 - helix
pH 7 - random coil
pH 11 - helix
pH 11 - random coil
is made of units of ; it is broken down by an enzyme called . group of answer O choices starch; fructose; O amylase amino acids; maltose; O maltase starch; glucose; O amylase lactose; galactose;
Starch is made of units of and it is broken down by an enzyme called amylase.(c)
Starch is a polysaccharide made up of glucose units, which are broken down into simpler glucose molecules by the enzyme amylase. Amylase is secreted by the salivary glands and pancreas, and it breaks down starch into smaller molecules that can be absorbed by the body.
This process of breaking down starch into glucose is crucial for energy production in the body, and it is also important for regulating blood sugar levels. In summary, starch is broken down by amylase into glucose, which is then used by the body for energy.
For more questions like Glucose click the link below:
https://brainly.com/question/17254083
#SPJ4
synthesis of dihydropyran dihydropyran is synthesized by treating tetrahydrofurfuryl alcohol with an arenesulfonic acid, arso3h. draw curved arrows to show the movement of electrons in this step of the reaction mechanism.
The creation of dihydropyran Tetrahydrofurfuryl alcohol is converted into dihydropyran by reacting it with the arenesulfonic acid arso3h.
Here's the reaction mechanism for the synthesis of dihydropyran from tetrahydrofurfuryl alcohol and arylsulfonic acid:
First, the acid protonates the alcohol to make it a better leaving group:
OH-CH2CH2CH2CH2-OH + ArSO3H → OH2+-CH2CH2CH2CH2-OH + ArSO3-
The product is then deprotonated by a base, such as sodium methoxide, to form dihydropyran:
[OC(CH2)2-Ar]+SO3- + NaOCH3 → OC(CH2)2-Ar + NaSO4CH3-
Overall, the reaction can be represented as:
OH-CH2CH2CH2CH2-OH + ArSO3H → dihydropyran + NaSO4CH3-
Learn more about movement of electrons here:
https://brainly.com/question/11905668
#SPJ4
a solution is prepared by mixing 10.5 g of nacl (molar mass 58.44 g/mol) with 147 g of h2o (molar mass 18.02 g/mol). the final volume of the solution is 150 ml. which of the following options are the correct values for molarity (m) and molality (m) of the solution? select all that apply.
m = 0.180 mol/0.147 kg = 1.22 m m 0.180 mol/ 0.150 L = 1.20 m
m = 0.180 mol/ 0.158 kg = 1.14 m
moles NaCl = 0.180 mol
The appropriate values for the solution's molality and molarity are:
M is 1.20 M, while m is 1.22 M.
We must first determine how many moles of NaCl are present in the solution:
Moles of NaCl are equal to the mass of NaCl divided by its molar mass, which is 10.5 g/58.44 g/mol, or 0.180 mol.
We must divide the number of moles of NaCl by the litres of the solution's volume to determine its molarity:
Molarity (M) is equal to moles of NaCl per litre of solution.
1.20 M = 0.180 mol/0.150 L molarity (M)
We must divide the number of moles of NaCl by the kilogramme mass of the solvent (water) in order to determine the molality of the solution:
moles of NaCl/mass of solvent in kg molality (m) = 0.180 mol/0.147 kg 1.22 m mass of H2O = 147 g = 0.147 kg
Hence, the appropriate values for the solution's molality and molarity are:
M is 1.20 M, while m is 1.22 M.
Learn more about molarity here:
https://brainly.com/question/8732513
#SPJ4
The reaction 2A + B → C has the following proposed mechanism Step 1: A + B ⇄ D (fast equilibrium) Step 2: D + B → E slow Step 3: E + A → C + B fast The rate law consistent with this mechanism is:
Rate = k[A][B]^2
Rate = k[A]^2[B]
Rate = k[A][B]
Rate = k[A]^2[B]^2
The rate law consistent with this mechanism is Rate = k[A][B]. Thus, option C is correct.
What is rate law of chemical equation?An expression that establishes a connection between the rate of a reaction and the concentrations of the reactants involved is known as the rate law (also known as the rate equation) for a chemical reaction.
It is significant to remember that the rate law's expression for a particular reaction can only be discovered through experimentation. From the balanced chemical equation, the rate law expression cannot be obtained (since the partial orders of the reactants are not necessarily equal to the stoichiometric coefficients).
The step that determines the overall speed (rate) of a chemical reaction is the step that moves the slowest.
Therefore, Rate = k[A][B] is the law consistent with this mechanism.
To learn more about Chemical Kinetics click given link;
brainly.com/question/29735982
#SPJ4
Which of the following properties is associated with the value of the n quantum number?
A) the number of electrons in an orbital
B) the size of an orbital
C) the orientation in space of an orbital
D) the energy of an orbital
E) the shape of an orbital
The correct answer is B) the size of an orbital.
The n quantum number, also known as the principal quantum number, is an integer value that determines the energy level and size of an orbital in an atom. The value of n ranges from 1 to infinity, with higher values of n corresponding to higher energy levels and larger orbitals.
The size of an orbital is determined by the distance between the electron and the nucleus. As the value of n increases, the distance between the electron and the nucleus increases, and the size of the orbital increases as well. This means that orbitals with higher values of n have more volume and can hold more electrons.
The other quantum numbers are associated with other properties of the electron orbitals. The l quantum number is associated with the shape of an orbital, the m quantum number is associated with the orientation of an orbital in space, and the spin quantum number is associated with the spin of an electron.
To learn more about Orbitals :
https://brainly.com/question/23160372
#SPJ4
Understanding how electrostatic energy scales with churns separation
The process describing how how electrostatic energy scales with churns separation is given above.
What is electrostatic energy?Electrical potential energy is typically stored by separating oppositely-charged particles and storing them on different conductors
Given is to understand how electrostatic energy scales with churns separation.
Churning is the process of shaking milk in order to convert it to butter. It is used to extract butter from milk or curd. It is also used to churn butter from cream.The separation of particulates in a fluid can be efficiently accomplished using electrical forces, the main criterion being the fluid must have insulating properties so an electric field can be superimposed across it.Electrostatic separation is done by initially charging the particulates or contaminants and then moving and concentrating them at the electric field boundary.Industrial Electrostatic Precipitation - In industrial applications, there are generally two arrangements:The horizontal-flow plate type - where a series of parallel plates, spaced up to 400 mm, form the gas passages and the discharge electrodes are insulated and hanging centrally between them.The tube type precipitator -where the gases pass upwards through vertical tubes measuring up to 250 mm dia., with the discharge electrode taking the form of a coaxial element.Therefore, the process describing how how electrostatic energy scales with churns separation is given above.
To solve more questions on electrostatic energy scaling, visit the link-
brainly.com/question/29014197
#SPJ1