Answer:
False
Explanation:
Non-volatile memory is a category of memory that retains its data even when the system is turned off or the power is off. It is sometimes referred to as static or permanent memory. For example, hard disk. Therefore, the given statement is false.
Answer:
TRUE
Explanation:
Volatile memory is memory or storage that loses its data when the computer's power is switched off. Volatile memory is a nonpermanent memory because when the power is off it loses its contents.
Example: Random Access Memory (RAM) is an example of volatile memory.
On the other hand, nonvolatile storage does not lose its contents when the computer power is switched off
Example: Read-only memory(ROM) is one example of Non-volatile storage.
Hence the given statement is "True".
1. what are the winding grooves which help a bullet maintain a stable trajectory called? quizlet
The winding grooves which help a bullet maintain a stable trajectory are called rifling.
How bullet stables its trajectory?
A bullet stabilizes its trajectory through the use of rifling, which are helical grooves in the barrel of a firearm. These grooves cause the bullet to spin as it travels through the air, much like a football does when it is thrown.
The spinning of the bullet creates gyroscopic stability, which helps to maintain its trajectory and resist any forces that would cause it to deviate from its path.
Additionally, the rifling imparts spin-stabilized flight, which helps to counteract the effects of wind and gravity and increases accuracy over long distances. Overall, the combination of rifling and the spinning of the bullet helps to ensure a stable and accurate trajectory.
To learn more about trajectory, visit: https://brainly.com/question/13262536
#SPJ4
If an EDM instrument has a purported accuracy capability of ±(1.5 mm + 2ppm) what error can be expected in a 25 ft measured distances (assume that the instrument and target mis-centering errors are equal to zero).
If an EDM instrument has a purported accuracy capability of ±(1.5 mm + 2ppm) error can ±1.50 mm.
What is EDM instrument?A surveying tool used to measure distance electronically between two sites using electromagnetic waves is an electronic distance measurement device.
EDM instruments are extremely dependable and practical surveying tools that can measure distances up to 100 kilometres.
Here, it is given that:
Accuracy capacity = ±(1.5 mm + 2ppm)
Measured distance = 25 m
[tex]E_i = E_r=0[/tex]
[tex]E_d=\sqrt{0^2+0^2+(1.5)^2+2PpmX[\frac{10^-^6}{Ppm}X25X\frac{10^3mm}{m} ]^2 }[/tex]
[tex]E_d=\sqrt{2.25+(2X10^-^6X25X10^3)^2}[/tex]
[tex]E_d= 1.50 mm.[/tex]
Thus, the answer is ±1.50 mm.
For more details regarding EDM instrument, visit:
https://brainly.com/question/15452991
#SPJ1
process innovation
workforce
product demand
production planning and control
The phase of the strategic marketing planning process corresponds to the execution phase; hence the assertion is untrue.
With the five examples below, controlling is the process of ensuring that actual actions conform to planned activities. Controlling and planning go hand in hand. Planning is more prevalent than controlling. The efficiency of their planning, formation, and managing operations is monitored by controlling benefits managers. It helps to keep track of how activities are progressing and ensures that they follow the guidelines outlined in the strategy to ensure that organizational goals are met. The segmentation, targeting, and positioning (STP) strategy should be used by marketers during this phase as it will assist the organization in identifying opportunities for developing pertinent and specialized marketing communication plans that can successfully target the identified target audience.
Learn more about Controlling and planning here:
https://brainly.com/question/20163428
#SPJ4
A motorcycle starts from rest at s = 0 and travels along a straight road with the speed shown by the v-t graph. determine the motorcycle's position when t = 13.5 s .
The motorcycle's position when t = 13.5s is 48m.
What is acceleration?In mechanics, acceleration is the rate at which an object's velocity with respect to time changes. Vector quantities include accelerations. The direction of the net force imposed on an object determines its acceleration in relation to that force. The pace at which speed changes is known as acceleration. Acceleration typically, but not always, indicates a change in speed. Because the direction of an object's velocity is shifting even while it follows a circular course, it continues to accelerate. The rate at which the velocity of an object changes with respect to time is referred to as acceleration in physics. According to Newton's Second Law, an object's acceleration is the end outcome of all forces acting on it.[tex]& \text { At } \quad t=8 S \\[/tex]
[tex]& a=\frac{d v}{d t}=0 \\[/tex]
[tex]& \Delta s=\int v d t \\[/tex]
[tex]& s-0=\frac{1}{2}(4)(5)+(8-4)(5)=30 \\[/tex]
[tex]& s=30 m \\[/tex]
[tex]& A t \quad t=12 s \\[/tex]
[tex]& a=\frac{d v}{d t}=\frac{-5}{5}=-1 m / s^2 \\[/tex]
[tex]& \Delta s=\int v d t \\[/tex]
[tex]& s-0=\frac{1}{2}(4)(5)+(10-4)(5)+\frac{1}{2}(15-10)(5)-\frac{1}{2}\left(\frac{3}{5}\right)(5)\left(\frac{3}{5}\right)(5) \\[/tex]
[tex]& s=48 m[/tex]
The complete question is,
A motorcycle starts from rest at s = 0 and travels along a straight road with the speed shown by the v–t graph. Determine the motorcycle’s acceleration and position when t = 8 s and t = 12 s.
To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ4
Page 18 In Your Textbook - Indicate what the Dimension is shown
TRUE/FALSE. the average velocity of a car traveling with a constant acceleration during a certain time interval is equal to the mean of the velocities at the beginning and end of that time interval.
Answer:
True
Explanation:
The following statement is true.
True, The average velocity of a car traveling with a constant acceleration during a certain time interval is equal to the mean of the velocities at the beginning and end of that time interval.
This can be calculated using the formula: average velocity = (initial velocity + final velocity) / 2. The average velocity over a time interval is the displacement divided by the time, and if acceleration is constant, the velocity of an object will change linearly. So, the average velocity of the object over the time interval is equal to the average of its initial and final velocities.
The average velocity of an object is a measure of its speed and direction of motion over a certain time interval. In the case of a car traveling with a constant acceleration, the velocity of the car changes linearly with time. This means that the rate of change of velocity is constant and equal to the acceleration.
If we know the initial velocity of the car and its acceleration, we can use the following formula to find its velocity at any time t: v = u + at, where u is the initial velocity and a is the acceleration.
Since the velocity of the car changes linearly with time, the average velocity over a time interval can be found by taking the mean of the velocities at the beginning and end of the interval. The formula for average velocity is: average velocity = (initial velocity + final velocity) / 2.
Learn more about average velocity here:
https://brainly.com/question/12984400
#SPJ4
A forklift will tip over if the center of gravity is outside the stability triangle. True or false?
Answer:
True
Explanation:
A forklift will tip over if the center of gravity is outside the stability triangle. The stability triangle refers to the area within the three wheels of a forklift that ensures the stability of the machine and prevents tipping. If the center of gravity of the load being carried by the forklift moves outside of the stability triangle, the machine becomes unstable and is at risk of tipping over. It's important to properly balance the load on a forklift and ensure that the center of gravity stays within the stability triangle to avoid accidents and maintain safety.
I hope this information is helpful. I mostly prefer MyAssignmentHelp.com for homework help. Please let me know if you have any additional questions or refer to MyAssignmentHelp.com for further assistance.
why is it important to understand kernel module dependencies
Because you can use them to designate which modules can be loaded before or after a module is asked to be loaded, it is crucial to understand kernel dependencies.
Some kernel modules require the loading of other modules before they may be loaded, which is known as a module dependency. Before loading the requested module, the command looks for these dependencies and loads the dependent modules. Consider the command. Kernel modules are bits of code that the kernel can load and unload as needed. They increase the kernel capabilities without requiring a system reset. A module can be set to be loadable or built-in.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
how can you add an angle to all extruded faces of a feature
Stretching a flat, 2D shape vertically to produce a 3D item in a scene is called extrusion. For instance, extruding building polygons by a height value can result in three-dimensional building shapes.
By applying a force that causes the material to flow through an opening or die, a process known as extrusion allows a material to be plastically deformed. If the substance possesses the necessary qualities, it will adopt the cross-sectional profile of the die and keep that form in the final extrudate. The playdough toys used when playing with it are a straightforward illustration of extrusion. Playdough is forced through the die to form a certain shape, and the procedure is known as extrusion. The substance must be forced through the die firmly in order for it to produce the correct form.
Learn more about Extrusion here
https://brainly.com/question/16022996
#SPJ4
leadership, according to weibler, can be understood as ...
Explanation:
Leadership, according to Weibler, can be understood as a process of social influence in which an individual inspires and directs the behavior and goals of a group towards a common vision."
According to Weibler, leadership can be understood as the process of influencing and guiding individuals or groups towards a common goal. Weibler believes that effective leaders have the ability to inspire, motivate, and empower others to achieve their full potential. This requires a combination of personal qualities, such as vision, integrity, and charisma, as well as a deep understanding of the needs and motivations of the people being led. Weibler also emphasizes the importance of leaders adapting to changing circumstances and being able to effectively navigate complex situations and challenges.
Translate the following C code to MIPS assembly code. Assume that the values of a, b, i, and j are in registers $s1, $s2, $t5, and $t6, respectively. Also, assume that register $s0 holds the base address of the array myArray. For (I = 0; I < b; i++)for (j = 0; j < a; j++) myArray[j] = I + j;
To translate the C code into MIPS assembly code, you can use the following instructions:
addi $t7, $zero, 0 # Initialize loop counter i
loop1:
# Loop while i < b
slt $t0, $t5, $s2
beq $t0, $zero, endloop1
addi $t7, $t7, 1 # Increment loop counter i
addi $t6, $zero, 0 # Initialize loop counter j
loop2:
# Loop while j < a
slt $t0, $t6, $s1
beq $t0, $zero, endloop2
sll $t3, $t6, 2 # Compute address of element myArray[j]
add $t4, $s0, $t3 # Compute address of element myArray[j]
add $t1, $t7, $t6 # Calculate value of I + j
sw $t1, 0($t4) # Store value of I + j at address myArray[j]
addi $t6, $t6, 1 # Increment loop counter j
j loop2 # Jump to start of loop2
endloop2:
j loop1 # Jump to start of loop1
endloop1:
Learn more about programming:
https://brainly.com/question/26134656
#SPJ4
What is the purpose of the Engineering and Manufacturing Development phase quizlet?
The Engineering and Manufacturing Development (EMD) phase is a crucial step in the development and production of new products or systems. The purpose of the EMD phase quizlet is to evaluate and refine the design, engineering, and manufacturing processes for a product or system before it goes into full-scale production.
During the EMD phase quizlet, a product or system prototype is created and tested to determine if it meets all the requirements and specifications set forth in the design phase. The EMD phase quizlet is also an opportunity to identify any potential issues and make necessary modifications to the design and manufacturing processes. The goal of the EMD phase quizlet is to ensure that the product or system can be manufactured efficiently and effectively, and that it meets all performance and quality standards.
The EMD phase quizlet is a critical stage in the development of a product or system as it helps to identify any potential problems before the product or system goes into full-scale production. This allows for changes to be made to the design and manufacturing processes, which can save time and resources in the long run. The results of the EMD phase quizlet also provide valuable information for future improvements and modifications to the product or system.
In conclusion, the EMD phase quizlet is an essential step in the development and production of new products or systems. It provides an opportunity to evaluate and refine the design, engineering, and manufacturing processes, and to identify any potential issues before the product or system goes into full-scale production. The results of the EMD phase quizlet are critical to ensuring the success of the final product or system.
For more about quizlet:
https://brainly.com/question/29770731
#SPJ11
The Engineering and Manufacturing Development (EMD) phase is a crucial step in the development and production of new products or systems.
The purpose of the EMD phase quizlet is to evaluate and refine the design, engineering, and manufacturing processes for a product or system before it goes into full-scale production.
What is EMD?
In the Engineering & Manufacturing Development (EMD) phase, the system is developed and designed before it goes into production. The EMD phase begins after the successful completion of Milestone B, which is considered the formal start of any program.To know more about EMD, click the link given below:
brainly.com/question/29770731
#SPJ4
design and implement a timespan class which represents a duration of time in hours, minutes, and seconds. the order hours, minutes, and seconds should be respected in the constructor.
A Time Span object represents a time interval (length of time or elapsed time) that is measured in days, hours, minutes, seconds, and fractions of a second. The Time Span structure may also be used to represent the time of day, but only if the time is not associated with a specific date.
Otherwise, use the Date Time or Date Time Offset structure instead. (See Choosing Between Date Time, Date Time Offset, Time Span, and Time Zone Info for additional information on utilizing the Time Span structure to indicate the time of day.) A day is the greatest unit of time used by the Time Span structure to quantify duration. Because the number of days in greater units of time, such as months and years, vary, time intervals are measured in days for consistency.
A Time Span object's value is the number of ticks that equal the specified time period. A tick is one ten-millionth of a second, or 100 nanoseconds. A Time Span object's value can vary from Time Span to Time Span. Time Span to Min Value. Max Value Creating a Time Span Value .A Time Span value may be created in several ways:
By using its parameter less implicit function Object() { [native code] }. As seen in the following example, this produces an object with the value Time Span. Zero C#
Copy Run Time Span interval = new Time Span(); Console. WriteLine(interval. Equals(Time Span. Zero)); / Displays the time span interval.
Learn more about measured from here;
https://brainly.com/question/30388546
#SPJ4
three resistors are connected in parallel across a 40 V source. The values of the resistors are 620 ohms, 750 ohms, and 820 ohms. Show your work for each..(a) What should the total sourrce current be?(b) If the measured current was 118 mA, what fault could account for this
Answer:
(a) about 166.6 mA
(b) there is no current through the 820 Ω resistor
Explanation:
You want to know the total current in the parallel circuit that has 620 Ω, 750 Ω, and 820 Ω resistors connected to a 40 V source. You want to know the possible fault if the current is 118 mA.
(a) Parallel circuitEach of the resistors is connected directly to the source, so the total current supplied by the source is the sum of the currents through each of the resistors:
40V/(620Ω) ≈ 64.52 mA
40V/(750Ω) ≈ 53.33 mA
40V/(820Ω) ≈ 48.78 mA
The total source current is ...
64.52 +53.33 +48.78 = 166.63 mA
The source current is about 166.6 mA.
(b) 118 mAA source current of 118 mA is about 48.63 mA less than expected. That current is approximately the amount through the 820Ω resistor, suggesting that the 820Ω resistor is not passing any current.
The 820Ω branch of the circuit appears to be "open."
A)Total Resistance = 1/((1/620)+(1/750)+(1/820)) = 468 ohms,Total Source Current = 40 V / 468 ohms = 85.51 mA (b) If the measured current was 118 mA, then this indicates that there is a fault in the circuit.
What is the measured ?
The measured is the amount or quantity of something that has been determined by careful examination or calculation. It is usually expressed as a number or a comparison. Measuring is the process of determining the amount or quantity of something, typically by comparison with a standard or unit. Measuring can be done in many ways, including the use of instruments such as rulers, scales, thermometers, and other devices.This could be due to an additional resistance in the circuit that is causing the current to increase.
To learn more about measured
https://brainly.com/question/30134560
#SPJ4
order the following functions by growth rate: n, √n, n1.5, n2, nlogn, n log log n, n log2 n, n log(n2), 2/n, 2n, 2n/2, 37, n2 log n, n3. indicate which functions grow at the same rate.
n, √n, 2/n, 2n/2, 37, 2n < n1.5 < n2 < nlogn < n log2 n < n log(n2) < n log log n < n2 log n < n3
Functions that grow at the same rate: n, √n, 2/n, 2n/2, and 37
What is function
In programming, a function is a block of code that performs a specific task. It is often used to perform a task based on given parameters, and can be reused multiple times. Functions are essential components of programming, and can be found in many different programming languages.
When a function is not functioning properly, it may not be producing the desired output or might be producing incorrect results. This could be due to a number of factors, such as incorrect syntax, a logical error in the code, or a bug in the code. In order to fix the issue, it is important to identify what is causing the malfunction and make any necessary changes to the code.
To know more about function
https://brainly.com/question/28945272
#SPJ4
Which of the following types of relationships can a relational database not define?
Group of answer choices
one-to-many
zero-to-many
one-to-one
many-to-many
zero-to-many types of relationships can a relational database not define.
Understanding the many kinds of database relations is one of the most crucial aspects of databases. That refers to both the process of creating a database model and the analysis of your data. Understanding these relationships is somewhat simple and natural, yet it is nonetheless crucial for database theory.
kinds of relationships
In the database, there are 3 different kinds of relations:
Many-to-Many, One-to-One, and One-to-Many
Despite their differences, they are (nearly) identically represented in databases, and that is the line separating the two tables. What then is different? We will go over each of these relationship kinds individually and comment on what each one's true goal is.
To know more about database :
https://brainly.com/question/25198459
#SPJ4
what is the part of a drill that holds the drill bit in place is called the ?
The part of a drill that holds the drill bit in place is called the chuck.
The chuck is a key component of a drill, as it securely holds the drill bit in place during operation. It is typically located at the end of the drill, and can be opened and closed to insert or remove the drill bit.
The chuck is usually operated by either a key or a lever, depending on the type of drill. It is important to make sure that the chuck is properly tightened when the drill bit is inserted, as this will ensure that the bit is secure and will not slip or come loose during drilling.
Additionally, it is important to make sure that the bit is compatible with the size of the chuck, as an improper fit could cause the bit to become stuck or damaged.
Learn more about The chuck: https://brainly.com/question/17206156
#SPJ4
1. what are the commonly used framing members commonly used in light frame construction?
The commonly used framing members commonly used in light frame construction are Studs,Joists,Beams,Lintels,Plywood Sheathing,Trusses, Headers,Sills,Blocking,Columns.
What is the construction ?
Construction is the process of creating structures, buildings and infrastructure. It is a process that involves planning, designing, and constructing physical structures such as roads, bridges, and buildings. Construction also includes the renovation and improvement of existing structures. Construction is generally divided into two categories: residential and commercial. Residential construction involves building homes and other dwellings, while commercial construction involves building businesses, office buildings, and recreational facilities. Construction requires a large amount of resources and planning in order to be successful. This includes obtaining permits, researching materials, finding the right contractors, and ensuring the construction site is safe. Construction is a complex and highly regulated process that requires the expertise of many different professionals.
To learn more about construction
https://brainly.com/question/17169621
#SPJ4
You will be using the fictional manufacturing facility Acme Automotive Parts (AAP) throughout the course. AAP manufactures several support parts for new automobiles as a small supplier to Nissan, Honda, and Volkswagen facilities in the United States. Their processes include shipping/receiving, hydraulic presses, metal working lines, robotic welding stations, hand-welding stations in rework areas, two small paint booths, a quality assurance/quality control (QA/QC) laboratory, and a final inspection area.
For this unit please answer the following question:
Determine what information you would use to anticipate health hazards that might be present in each of the eight areas of the AAP plant. State where you might find the information you need.
To anticipate health hazards in each of the eight areas of the AAP plant, the following information could be used:
1. Shipping/Receiving:
Type of materials being received and shippedPossible exposure to hazardous chemicals, dust, and fumesPossible exposure to heavy machinery and equipmentInformation could be found in Material Safety Data Sheets (MSDS) for the materials, as well as through workplace observations and assessments.2. Hydraulic Presses:
Possible exposure to hydraulic fluids and associated fumesPossible exposure to high pressure and loud noise levelsInformation could be found in MSDS for hydraulic fluids and through workplace assessments and monitoring.3. Metal Working Lines:
Possible exposure to metal dust, fumes, and particlesPossible exposure to high noise levelsPossible exposure to sharp edges and hot surfacesInformation could be found through workplace assessments and monitoring, as well as through MSDS for any chemicals used in the metal working process.4. Robotic Welding Stations:
Possible exposure to welding fumes, dust, and particlesPossible exposure to high noise levelsPossible exposure to high heat and bright lightInformation could be found through workplace assessments and monitoring, as well as through MSDS for any chemicals used in the welding process.5. Hand-Welding Stations in Rework Areas:
Same hazards as in robotic welding stationsPossible exposure to sparks and hot surfacesInformation could be found through workplace assessments and monitoring, as well as through MSDS for any chemicals used in the welding process.6. Small Paint Booths:
Possible exposure to paint fumes and particulate matterPossible exposure to high noise levelsInformation could be found through workplace assessments and monitoring, as well as through MSDS for the paint materials.7. QA/QC Laboratory:
Possible exposure to chemicals and hazardous materials used in testing and analysisPossible exposure to high noise levels from laboratory equipmentInformation could be found through workplace assessments and monitoring, as well as through MSDS for the chemicals and hazardous materials used in the laboratory.8. Final Inspection Area:
Possible exposure to dust and fumes from various manufacturing processesPossible exposure to high noise levelsInformation could be found through workplace assessments and monitoring, as well as through MSDS for any chemicals used in the final inspection process.To anticipate health hazards in each area of Acme Automotive Parts (AAP) manufacturing facility, the following information would be relevant.
What are the information that are relevant in this case?1. Shipping/Receiving: Material Safety Data Sheets (MSDS) for chemicals received, potential for heavy lifting injuries, and risks associated with forklift operations.
2. Hydraulic Presses and Metal Working Lines: MSDS for lubricants and coolants, risks of crush injuries, and exposure to metal fumes.
3. Robotic and Hand-Welding Stations: MSDS for welding materials, welding fume exposure, and risk of burns.
4. Paint Booths: MSDS for paints and coatings, potential for volatile organic compounds (VOCs) exposure, and respiratory hazards.
5. QA/QC Laboratory: MSDS for chemicals used in testing, potential for chemical exposure, and ergonomic risks.
6. Final Inspection Area: Ergonomic risks associated with repetitive tasks, MSDS for any chemicals used, and general safety precautions.
Learn more about Acme Automotive Parts at:
https://brainly.com/question/30694117
#SPJ2
how do dynamic study modules use interleaving to help you master the material? A. Covering dillerent topics in the aime module B. ASking different questions before providing any instructions C, asking you to rate confidence
Interleaving in dynamic study modules involves alternating between different topics or questions within a study session, rather than focusing on just one topic or question at a time. So, a technique that might be used to gauge your confidence in your understanding of the material.
What is dynamic study modules?
Dynamic study modules are a type of learning program that adapts to the individual learner's performance and needs in real-time. These modules use algorithms and machine learning techniques to adjust the content, difficulty level, and presentation of material based on the learner's progress and responses. The goal of dynamic study modules is to provide a personalized learning experience that is both efficient and effective, helping the learner to master the material more quickly and effectively than with traditional methods.
Interleaving in dynamic study modules involves alternating between different topics or questions within a study session, rather than focusing on just one topic or question at a time. This method helps you to integrate different pieces of information and practice recalling them, which can enhance your overall mastery of the material. This approach can also help prevent boredom and increase your motivation to study. Both options A and B describe ways in which dynamic study modules might use interleaving to help you master the material, while option C is a technique that might be used to gauge your confidence in your understanding of the material.
Learn more about dynamic study modules click here;
https://brainly.com/question/5269224
#SPJ1
Establishing construct validity would probably be most important for which of the following?
A measure of heart rate
A measure of the number of times a person eats alone during a month
A measure of spirituality
A measure of income
Establishing construct validity would probably be most important for a measure of spirituality.
What is construct validity?
To show that a survey can tell the difference between those who have particular qualities and those who do not, construct validity is proven experimentally. For instance, if a survey researcher asserts that a measure of satisfaction has constructive validity, they will need to show, in a rigorous way, how satisfied respondents behave differently from unsatisfied respondents. There are at least two popular approaches to establish construct validity:
1. The survey researcher hypothesizes that the new measure does not correlate with measurements of different qualities and that it does correlate with one or more measures of a similar characteristic (convergent validity) (discriminant validity).
2. The survey researcher makes the assumption that the measure can separate one group from the other on a crucial factor.
Learn more about construct validity:
https://brainly.com/question/13012369
#SPJ4
Which type of facing would be best suited to curved ceiling surfaces? A. Drywall B. Plywood C. Plaster D. Wood planking.
Answer:
C.) Plaster
Explanation:
You're welcome
Plaster would be best suited to curved ceiling surfaces. Plaster is a versatile material that can be molded and shaped to fit curved surfaces, making it ideal for covering curved ceiling surfaces.
Plaster is a versatile material that can be molded and shaped to fit curved surfaces, making it ideal for covering curved ceiling surfaces. Unlike drywall, plywood, or wood planking, plaster can be applied in a thin layer to conform to the shape of the curved surface. This allows for a smooth, seamless finish that seamlessly blends with the curves of the ceiling. Additionally, plaster dries to a hard, durable surface that can be painted or textured to match the design of the room. For these reasons, plaster is often considered the best option for covering curved ceiling surfaces.
In addition to its versatility and ability to conform to curves, plaster also has several other advantages when used on ceiling surfaces. Firstly, plaster is a fire-resistant material, which makes it a good choice for use in areas where fire safety is a concern. Secondly, plaster can be used to create a wide range of textures and finishes, including smooth, sanded, or heavily textured surfaces. This allows for a great deal of creative freedom when designing a curved ceiling.
Learn more about fire-resistant material here:
https://brainly.com/question/11471571
#SPJ4
which is easier to break crayon or pencil A. Crayon B. Pencil C. There is no difference
There is no difference to break crayon or pencil.
Hence, the correct answer is option C.
The majority of pencil cores are produced from a mixture of graphite powder and clay binder. Graphite pencils, also referred to as "lead pencils," leave behind grey or black traces that can be quickly erased but are otherwise resistant to moisture, the majority of chemicals, ultraviolet light, and aging from the environment. For drawing and sketching, other types of pencil cores, such those made of charcoal, are typically utilized.
Crayons are available in a range of prices, and are easy to work with. They are less messy than most paints and markers, blunt (removing the risk of sharp points present when using a pencil or pen), typically non-toxic, and available in a wide variety of colors. These characteristics make them particularly good instruments for teaching small children to draw in addition to being used widely by student and professional artists.
To know more about crayon here:
https://brainly.com/question/14984362
#SPJ4
A preure veel with a contant volume of V, and contant temperature of T, i being filled with a ga tream. The tank i initially filled with N mole of the ga. The change in the number of mole of ga in the veel i a function of the difference in the inlet preure and alo the tank preure, a follow:
Where N₁ and N₂ are the number of mole of ga at the inlet and tank preure, respectively, P₁ and P₂ are the inlet and tank preure, V is the volume of the tank, R is the univeral ga conant and T i the temperture of the ga in the tank.
[tex]N_2 - N_1 = V (P_1 - P_2) / (RT)[/tex]The equation provided above describes the change in the number of moles of gas in a vessel of constant volume and temperature.
This equation states that the difference between the number of moles of gas at the inlet and the tank pressure is proportional to the difference in the inlet pressure and tank pressure, and also inversely proportional to the temperature and the universal gas constant.
This equation allows us to calculate how much gas is present in a vessel at a given pressure and temperature. This equation also allows us to understand how much gas is added or removed from the vessel depending on the inlet and tank pressure.
Learn more about Number of mole: https://brainly.com/question/29242554
#SPJ4
a driver should signal at least ________ feet before making a turn.
A driver should signal at least 100 feet before making a turn.
A driver should signal at least 100 feet before making a turn. This allows other drivers, cyclists, and pedestrians to be aware of the driver's intentions in advance. Signaling provides the necessary time for everyone to adjust accordingly.
As drivers, it is essential to be aware of our surroundings and to signal our intentions to those nearby. By signaling at least 100 feet before making a turn, drivers can provide enough warning so that everyone can safely adjust to the upcoming maneuver.
Proper signaling can help reduce the potential for accidents caused by sudden lane changes or turns. Signaling 100 feet in advance is a key part of driving safely and responsibly.
Learn more about traffic signals: https://brainly.com/question/24759367
#SPJ4
what type of volcanism formed a structure like the island of hawaii?
what type of glove protects us from electrical sparks?
Answer:
they r generally designed to protect us from hazards like electric spark...
plss like, follow for more answers
please answer the question
In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.
What is gas absorption experiment ?The previous chapter provided derivations of the relationships for mass and momentum conservation—the equations of motion—in rectangular, cylindrical, and spherical coordinates.
All experimental evidence suggests that these are the most fundamental equations of fluid mechanics, and that they govern any situation involving the flow of a Newtonian fluid in principle.
Therefore, In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.
Learn more about momentum on:
https://brainly.com/question/24030570
#SPJ1
2.13 LAB: Count characters Write a program whose input is a string which contains a character and a phrase, and whose output indicates the number of times the character appears in the phrase. Ex: If the input is: n Monday the output is: Ex: If the input is: z Today is Monday the output is: 0 Ex: If the input is: n It's a sunny day the output is: 2 Case matters. Ex: If the input is: n Nobody the output is: 0 n is different than N. 2477/2.1898342.cx32997 LAB ACTIVITY 2.13.1: LAB: Count characters 0/10 main.py
A string is normally regarded as a type of data and is frequently implemented as an array data structure made up of bytes (or words) that stores a series of components, usually characters, using a character encoding.
What is string?A string is normally regarded as a type of data and is frequently implemented as an array data structure made up of bytes (or words) that stores a series of components, usually characters, using a character encoding. Other data types and structures that use sequences (or lists) of items can also be referred to as string. Traditionally, a string in computer programming is a collection of characters that can be either a literal constant or a type of variable. The latter can either have fixed length and allow for element mutations (after creation). Text and character data are stored in strings. Consider the string of characters that make up "Hello World." C lacks a String type that would make it simple to generate string variables, unlike many other programming languages.user_string=input(str())
character=user_string[0]
phrase=user_string[1]
count=0
for i in phrase:
if i == character:
count = count+1
if count!= 1:
print(str(count) + " " + character + "'s")
else:
print(str(count) + " " + character)
To learn more about string refer to:
https://brainly.com/question/25324400
#SPJ4
The top of a ladder weighing 20kg and 6m long rests against a vertical wall and the foot of the ladder on a horizontal floor. For the wall, f=0.15, and for the floor f=0.20. How far up the ladder can a man weighing 60kg go before the ladder begins to slip?
The ladder distance a man weighing 60kg go before the ladder begins to slip is 2.973m.
What is friction?
The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.
There are various kinds of friction: Two solid surfaces in touch are opposed to one another's relative lateral motion by dry friction.
Here, it is given that:
Weight of man = 20kg
[tex]N_1=f_aMg\\N_2=f_bMg[/tex]
Momentum = 0
So,
[tex]N_1-N_2=-WgX[/tex]
[tex](f_a-f_b)20=-60X[/tex]tanФ
(0.15 - 0.02)20 = -60X x 3/5
x = 1/36
x = 0.027
Now, the distance will be 3 - x = 2.973m.
Thus, the answer is 2.973m.
For more details regarding friction, visit:
https://brainly.com/question/28356847
#SPJ1