NH3 is a stronger base than H20. Goal: Explain this observation using molecular orbitals. 1. Draw the molecular orbital diagrams for NH3 and H20 on the same energy scale. Appropriately label each MO with its type (0, 0*, nb, a, 1*) as well as with the atom(s) whose orbitals led to that MO.

Answers

Answer 1

The Establishment of the Molecular Orbitals of NH3. A molecule's electrical structure can be predicted using the Molecular Orbital Theory (MO).

What is meant by Molecular Orbital Theory?Simply put, according to the molecular orbital hypothesis, atoms tend to group together to create molecular orbitals. As a result of this arrangement, electrons can be found in a variety of atomic orbitals and are typically connected to numerous nuclei. In order to create the molecular orbital, the atomic orbitals combine. Similar to how the energy states of atomic orbitals are filled, the electrons of molecules fill the new molecular orbitals' energy levels.The work of Friedrich Hund, Robert Mulliken, John C. Slater, and John Lennard-Jones was crucial in the development of molecular orbital theory in the years after the establishment of valence bond theory (1927). The Hund-Mulliken theory was what MO theory was first known as.

To learn more about Molecular Orbital Theory, refer to:

https://brainly.com/question/26388921

#SPJ4


Related Questions

find the mass of a 50.0 ml quantity of water if the density of water is 100 grams/ml

Answers

Answer:          5 × 10^3 g

Or, without significant figures, 5000 g.

To find the mass when given volume and density, multiply the volume with density.

Dimensional analysis

We can solve using dimensional analysis or the 'cancelling out units' method.

We are looking for the mass, which will be in grams (g).Write volume and density as fractions so that other units cancel.

[tex]m = \frac{50.0\ mL}{1}*\frac{100\ g}{1\ mL}[/tex]

[tex]m = \frac{50.0}{1}*\frac{100\ g}{1}[/tex]          Since mL is in the top and bottom, they cancel out.

[tex]m = 5000\ g[/tex]                 Multiply to find the answer.

[tex]m = 5 * 10^{3}\ g[/tex]              Write the answer with significant figures.

Therefore, the mass of 50.0 mL of water is 5 × 10^3 g.

This is the same as 5000 g if we do not consider significant figures.

Significant figures

If we use significant figures in this answer, we only keep 1 significant figure. When multiplying numbers, the final answer will have the same amount of significant figures as the numbers in the question with the least amount of significant figures.

If the numbers in the question have different amounts of significant figures, we will take the least amount of significant figures from the problem.

We had two numbers from the problem and they had different amounts of significant figures:

50.0—This has 3 significant figures.100—This has 1 significant figure. This number has the least amount of significant figures.

So, our final answer should only have 1 significant figure.

Learn another way to solve for mass here:

https://brainly.com/question/952755

Calculate the pH for each of the cases in the titration of 35.0 mL of 0.190 M KOH(aq) with 0.190 M HI(aq). Note: Enter your answers with two decimal places. before addition of any HI: after addition of 13.5 mL HI: after addition of 20.5 mL HI: after addition of 35.0 mL HI: after addition of 40.5 mL HI: after addition of 50.0 mL HI:

Answers

The pH is determined by the relative amounts of acid and base in each circumstance.

What is meant by proportional concentration?The rate of reaction increases with an increase in reactant concentration and decreases with a reduction in reactant concentration. The concentration of reactants has a direct relationship with the rate of reaction. Effect of concentration: According to the law of mass action, the rate of a reaction is directly proportional to the concentration of the reactants, meaning that the rate of a reaction rises as the concentration of the reactants rises. Pressure: Pressure has the ability to raise reactant concentration.The rate is proportional to the reactant's concentration. The rate doubles with a doubling of concentration. The square of a reactant's concentration determines the rate. The rate increases four times when you twice the concentration.

a) Before addition of HBr;

Number of moles of C5H5N = 25/1000 L × 0.180 M = 0.0045 moles

pOH = -log[0.0045 M]

pOH = 2.35

pH = 14 - 2.35 = 11.65

b) After addition of 12.5 mL of HBr;

Since the reaction is 1:1

Number of moles of HBr = 12.5/1000 L × 0.180 M = 0.00225 moles

The HBr is the limiting reactant

Amount of excess acid = 0.0045 M - 0.00225 = 0.00225 moles

Total volume of solution = 25mL + 12.5 mL = 37.5mL or 0.0375 L

molarity of excess H+ = 0.00225 moles / 0.0375 L = 0.06 M

pH = - log[0.06 M]

pH = 1.22

c) After addition of 24.0 mL of HBr;

Number of moles of acid = 24/1000  × 0.180 M = 0.00432 moles

Number of moles of excess acid =  0.0045 moles  - 0.00432 moles = 0.00018 moles

Total volume of solution =  24.0 mL +  25.0 mL = 49mL or 0.049 L

Molarity of excess acid = 0.00018 moles/ 0.049 L = 0.00367 M

pH = -log[0.00367 M] = 2.4

d) After addition of 25.0 mL of HBr

Number of moles of acid = 25/1000  × 0.180 M = 0.0045 moles

We have an equal number of acid and base hence pH = 11.65

e) After addition of 34.0 mL of HBr;

Number of moles of acid = 34/1000  × 0.180 M =0.00612 moles

We can see that the base is the limiting reactant.

Number of moles of excess base = 0.00162 moles

Total volume of solution = 34 mL + 25 mL = 59mL or 0.059 L

Molarity of excess base = 0.00162 moles/0.059 L = 0.027 M

pOH = -log[ 0.027 M]

pOH = 1.56

pH = 14 - 1.56 = 12.44

To learn more about proportional concentration, refer to:

https://brainly.com/question/25292980

#SPJ4

4. Convert 1.077 moles of magnesium phosphate into its corresponding mass in grams!

Answers

The result from conversion 1.077 moles of magnesium phosphate to mass in grams is 283.14 grams. The molar mass of magnesium phosphate is 262.9 g/mol.

Explanation

Formula:

[tex]\boxed{\tt g=n\times Mr}[/tex]

n = moles number of molecules, mol.g = mass of molecules, grams.Mr = molar mass, g/mol.

Given:

Periodic Table of Elements:
Ar Mg = 24.3 g/mol.
Ar P = 31 g/mol.
Ar O = 16 g/mol.n Mg₃(PO₄)₂ = 1.077 moles.

Therefore,

First, calculate the molar mass of Mg₃(PO₄)₂.

Magnesium (Mg):
3 x 24.3 g/mol = 72.9 g/mol.Phosphorus (P):
2 x 31 g/mol = 62 g/mol.Oxygen (O):
8 x 16 g/mol = 128 g/mol.Total molar mass of Mg₃(PO₄)₂:
Mr = 72.9+ 62+ 128= 262.9 g/mol

Second, calculate mass of Mg₃(PO₄)₂.

mass = moles x molar massmass = 1.077 mol x 262.9 g/mol mass = 282.17 grams.

So, 1.077 moles of magnesium phosphate correspond to 283.14 grams of magnesium phosphate.

Learn more about other conversion from moles to mass on:

https://brainly.com/question/30864555https://brainly.com/question/30864409https://brainly.com/question/30864418

predict the major product for each of the following reactions:5-methyl-3-hexyne or 5-methylhex-3-yne is a 6 carbon chain with a triple bond between carbons 3 and 4 and a methyl substituent on carbon 5. this reacts with c l 2 to give product 1. product 1 then reacts with c l 2 to give product 2.

Answers

When 5-methyl-3-hexyne (or 5-methylhex-3-yne) reacts with Cl2, the triple bond will be broken, and two Cl atoms will be added to the two adjacent carbons, forming a dihalogenated alkene.

This will result in the formation of a trans-dihalogenated alkene, where the two Cl atoms are on opposite sides of the double bond. The major product for the first reaction will be 5-methyl-3-hexene-1,2-dichloro, which is formed by the addition of two Cl atoms to the carbons 3 and 4, and the formation of a double bond between carbons 2 and 5. The major product of this reaction will be 5-methyl-3,4-dichloro-2-hexene, which is formed by the addition of two Cl atoms to the carbons 2 and 5, and the addition of two more Cl atoms to the carbons 3 and 4.

Learn more about triple bond reaction here:

https://brainly.com/question/19331363

#SPJ4

10. Changing the volume of the system alters the equilibrium position of this equilibrium:
2( ) 2( ) 3( ) 3 2 N H NH gg g
+
But a similar change has no effect on this equilibrium:
2( ) 2( ) ( ) 2 H Cl HCl gg g
+
Explain.

Answers

It’s because the volumes don’t match, therefore u have gravity?

of the following, is the most volatile. select one: a. ch4 b. cbr4 c. ccl4 d. cf4 e. c6h14

Answers

The most volatile of the following compounds is CH4.

Volatile compounds are those that have a high vapor pressure and can easily evaporate into a gas at room temperature. This is typically due to weak intermolecular forces, such as dispersion forces, that allow the molecules to easily escape from the liquid phase.

In this case, CH4 (methane) is the most volatile because it has the weakest intermolecular forces among the compounds listed. It is a nonpolar molecule with only dispersion forces between its molecules, making it easy for it to evaporate into a gas.

The other compounds listed, CBr4, CCl4, CF4, and C6H14, all have stronger intermolecular forces, such as dipole-dipole forces or hydrogen bonding, that make them less volatile and less likely to evaporate at room temperature.

Therefore, the correct answer is A. CH4.

To know more about volatile compounds, refer here:

https://brainly.com/question/1163824#

#SPJ11

Which of the following is a heteropolysaccharide? A) amylopectin
B) cellulose
C) pectin
D) chitin
E) none of the above

Answers

C): Pectin is a heteropolysaccharide.

Pectin is a heteropolysaccharide, which is a complex carbohydrate made up of different types of monosaccharides. It is commonly found in the cell walls of plants and is used as a gelling agent in the food industry. Amylopectin and cellulose are both homopolysaccharides, meaning they are made up of only one type of monosaccharide (glucose). Chitin is a polymer of N-acetylglucosamine, which is a type of amino sugar, but it is not classified as a heteropolysaccharide.

You can learn more about Pectin at

https://brainly.com/question/24100150

#SPJ4

write the balanced nuclear equation for the alpha decay of each isotope. po84200 nuclear equation: thorium-229

Answers

The balanced nuclear equation for the alpha decay of polonium-84, and the nuclear equation for thorium-229 are:

Polonium-84 alpha decay:

^84Po --> ^4He + ^80Hg

In this equation, an alpha particle, which is a helium nucleus with a mass number of 4 and atomic number of 2, is emitted from the polonium-84 nucleus, resulting in the formation of a mercury-80 nucleus.

Thorium-229 nuclear equation:

^229Th

Thorium-229 is a stable isotope and does not undergo alpha decay or any other form of radioactive decay under normal circumstances.

Learn more about the balanced nuclear equation:

https://brainly.com/question/19752321

#SPJ4

If the chromium, Cr, contamination in water is 5ppm, how many grams of Cr are present in 1000g of pond water?

Answers

5 ppm of Cr means 5 mg is present in 1 L of water. Then, 1000 g of water is containing 5 mg or 0.005 g of chromium.

What is ppm ?

PPM or part per million is a term used to express the concentration of a solution. 1 ppm is equal to 1 mg of the solute in 1000 ml or in 1 L of the solution.

ppm  = weight of solute/mass of solution ×10⁶. = mg/L

ppm is used to express very minute quantity of ay sample. Usually used in the concentration of heavy metals in water.

It is given that the concentration of Cr in water is 5 ppm, which means 5 mg per one liter of water. 1 l of water is 1000 ml or 1000 g of water. Hence, 1000 g of water contains 5 mg or 0.005 g of Cr.

Find more on ppm:

https://brainly.com/question/14598158

#SPJ1

complete and balance the molecular equation for the reaction between aqueous solutions of silver nitrate and hydrochloric acid, and use the states of matter to show if a precipitate forms.

Answers

Molecular equation: AgNO3(aq)+HCl(aq)→AgCl(s)+HNO3(aq), ionic equation: Ag+(aq)+ NO3-(aq)+H+(aq)+Cl-(aq) -> AgCl(s)+H+(aq)+ NO3-(aq), Net ionic equation : Ag+(aq)+Cl-(aq) -> AgCl(s).

What does a chemistry molecular equation entail?

The equation is known as a molecular solution when complex formulae are written as though they're still molecules. When dissolved ionic chemicals are represented as free ions, the equation is said to be ionic. Demonstrated were examples of both molecular and ionic relations.

What is the total ionic vs. molecular equation?

Even soluble ionic chemicals and strong acids are treated as neutral molecules in the molecular formula for a reaction's reactants and products. Strong acids and soluble ionic compounds are rewritten as split ions in the full ionic equation.

To know more about Molecular equation visit:

https://brainly.com/question/14286552

#SPJ1

I NEED THIS DONE TODAY !!!!!!!!Electromagnetic Spectrum Lab Report
Destructions: In this virtual lab, you will use a virtual spectrometer to analyze astronomical
bodies in space. Record your hypothesis and spectrometric recular in the lab report below. You
will submit your completed report to your butructor.
Name and Title:
Include your name, instru
1
and name of lab.
Objectives (1):
In your own words, what is the purpose of this lab?
Hypothesis:
In this section, please include the predictions you developed during your lab activity. These
statements reflect your predicted outcomes for the experiment.
Procedure:
The materials and procedures are listed in your virtual lab. You do not need to repeat them here.
However, you should note if you experienced any errors or other factors that might affect your
outcome. Using your summary questions at the end of your virtual lab activity, please clearly
define the dependent and independent variables of the experiment.
Data:
Record the elements present in each unknown astronomical object. Be sure to indicate "yes" or
"no" for each element.
Hydrogen Helium Lithium Sodiam Carbon
Moon One
Moon Two
Planet One
Planet Two
Nitrogen
Conclusion:
Your conclusion will inchade a summary of the lab results and an interpretation of the results.
Please answer all questions in complete sentences using your own words.
1. Using two to three sentences, summarize what you investigated and observed in this lab
2. Astronomers use a wide variety of technology to explore space and the electromagnetic
spectrum; why do you believe it is essential to use many types of equipment when
studying space?
3. If carbon was the most common element found in the moons and planets, what element is
missing that would make them splat to Earth? Explain why. (Hint: Think about the
carbon cycle)
4.
We know that the electromagnetic spectrum uses wavelengths and frequencies to
determine a lot about outer space. How does it help us find out the make-up of stars?
5. Why might it be useful to determine the elements that a planet or moon is made up of?

Answers

The answers to the virtual lab that specifies the use of a virtual spectrometer is given below:

The Results of the Virtual Lab

2. Space consists of bodies with different types of electromagnetic spectrum.

This includes high-energy bodies emitting radiation in short wavelengths and extremely short wavelengths such as in UV spectrum, X rays, and gamma rays.

Conversely, other bodies might be emitting radiations in longer wavelengths such as Microwaves and Radio waves.

Since these radiations are at two different ends of the electromagnetic spectrum, a large number of equipment would be required for individually studying these space-based radiation sources and their characteristics.

3. The element missing from the moons and the planets would be Oxygen. It is to be remembered that Oxygen forms the base of the sustenance of life forms on Earth and forms an indispensable part of the carbon cycle. In the absence of oxygen, these planets and moons remain lifeless.

4. Stars emit heat and light. Along with the heat and light, radiations are emitted by the star. These radiations travel outward from stars and work as the signature of the stars. By analyzing the radiations from the stars, scientists back on Earth could deduce the physical conditions in the heart of a star including its constitution, temperature, and surface conditions.

E.g., If the star is emitting radiation in longer wavelengths, this is an indication that the star is cooling down and the temperature is relatively low.

5. The knowledge of the constitution of the elements making up the moon or planet is necessary to ascertain the life-sustaining capability of the same. Through adequate knowledge of the composition of the moon/planet, the possibility of the life-sustaining ability of the same could be deduced.

Read more about electromagnetic spectrum here:

https://brainly.com/question/25847009

#SPJ1

Write the empirical formula of at least four binary ionic compounds that could be formed from the following ions: Mg+2 , Al+3 , I− , S−2

Answers

Here are four possible empirical formula of binary ionic compounds that can be formed from the given ions MgI2, Al2S3, MgS, AlI3.

The empirical formula of a compound is the simplest whole-number ratio of atoms in the compound. To determine the empirical formula, we need to divide the subscripts in the molecular formula (if given) by the greatest common factor to get the simplest ratio. If we are not given a molecular formula, we can determine the empirical formula from the masses or percentages of the elements in the compound.

To write the empirical formula of a binary ionic compound, we need to combine a cation (positively charged ion) with an anion (negatively charged ion) in a way that balances the charges.

Magnesium iodide: Mg2+ + 2I- -> MgI2 (the charges balance as 2(+2) = 2(-1))

Aluminum sulfide: Al3+ + 3S2- -> Al2S3 (the charges balance as 3(+3) = 2(-2) + 3(-2))

Magnesium sulfide: Mg2+ + S2- -> MgS (the charges balance as 1(+2) = 1(-2))

Aluminum iodide: Al3+ + 3I- -> AlI3 (the charges balance as 3(+3) = 3(-1))

To know more about ionic compounds here

https://brainly.com/question/26126708

#SPJ4

Which of the following scenes best represents how the ions occur in an aqueous solution of
1. [ Select ] ["C", "A", "B"] MgCl2
2. [ Select ] ["A", "C", "B"] Na2SO4
3. [ Select ] ["B", "A", "C"] NH4Br

Answers

MgCl2: In an aqueous solution of MgCl2, the ions occur as Mg2+ and Cl–.

Na2SO4: In an aqueous solution of Na2SO4, the ions occur as Na+ and SO42-.

NH4Br: In an aqueous solution of NH4Br, the ions occur as NH4+ and Br–.

1. MgCl2: In an aqueous solution of MgCl2, the ions occur as Mg2+ and Cl–. This is represented by the scene "A" where two positive (+) ions and two negative (-) ions are shown. The equation for this is: MgCl2 → Mg2+ + 2Cl–

2. Na2SO4: In an aqueous solution of Na2SO4, the ions occur as Na+ and SO42-. This is represented by the scene "C" where two positive (+) ions and two negative (-) ions are shown. The equation for this is: Na2SO4 → 2Na+ + SO42-

3. NH4Br: In an aqueous solution of NH4Br, the ions occur as NH4+ and Br–. This is represented by the scene "B" where one positive (+) ion and one negative (-) ion are shown. The equation for this is: NH4Br → NH4+ + Br–

learn more about aqueous solution Refer:brainly.com/question/14097392

#SPJ4

a. Using proper arrow formalism, write down a mechanism for the formation of the acylium ion from the reaction between acetyl chloride and aluminium chloride. b. As a model system and using proper arrow formalism, write a mechanism for the Friedel-Crafts acylation of bromobenzene using the acylium ion formed in (a). To simplify your work, write a mechanism in which carbon-2 of bromobenzene (ortho- position) is the nucleophilic atom.

Answers

The mechanism of the reactions of both the subparts of the questions is below:

A)The formation of the acylium ion from the reaction between acetyl chloride and aluminium chloride can be described by the following mechanism:

Step 1: Formation of the complex

AcCl + AlCl3 → [AcCl-AlCl3]

Step 2: Deprotonation to form the acylium ion

[AcCl-AlCl3] → Ac+ + AlCl4-

In step 1, the acetyl chloride molecule reacts with aluminium chloride to form a complex. In step 2, the complex undergoes deprotonation to form the acylium ion, which is stabilized by the aluminium chloride.

(b) The mechanism for the Friedel-Crafts acylation of bromobenzene using the acylium ion formed in (a) can be described by the following steps:

Step 1: Formation of the complex

Ac+ + AlCl4- → [Ac-AlCl4]

Step 2: Attack of the ortho-carbon of bromobenzene

C6H5Br + [Ac-AlCl4] → C6H4Br-2-COCH3 + AlCl3

Step 3: Regeneration of the catalyst

AlCl3 + [Ac-AlCl4] → AcCl + AlCl4-

In step 1, the acylium ion formed in (a) reacts with aluminium chloride to form a complex. In step 2, the complex reacts with bromobenzene, and the ortho-carbon attacks the carbonyl carbon of the acylium ion to form a new carbon-carbon bond. In step 3, the catalyst is regenerated, and acetyl chloride is produced as a byproduct.

The arrow formalism for the three steps can be written as follows:

Step 1:

Ac+ AlCl4- [Ac-AlCl4]

↑ ↓ ↑

Step 2:

C6H5Br [Ac-AlCl4] C6H4Br-2-COCH3 AlCl3

↑ ↓ ↑ ↑

Nucleophile Electrophile Product Catalyst

Step 3:

AlCl3 [Ac-AlCl4] AcCl AlCl4-

↑ ↓ ↑ ↓

Catalyst Complex Byproduct Catalyst

To know more about mechanism of the reactions here

https://brainly.com/question/26690612

#SPJ4

1.
What is the physical state of matter (i.e., solid, liquid, or gas) at room temperature for element 35?
(1 mark)
2.
If the name with 115 protons in its nucleus were suddenly discovered, what period and what group
would they be in? (2 marks)
? Why did
Element 115 would be predicted to react in a similar to element
you choose this element? (2 marks)
Is element 115 more likely a metal or non-metal? (1 mark)
Will astatine (element 85) look more like iodine (element 53) or fluorine (element 9)? Why? (2
marks)
3.
4.
5.
6.
7.
8.
Why do you think hydrogen (element 1) is on both sides of the periodic table? (2 marks)
Name a metal that is in the liquid state at room temperature. (1 mark)
Explain the difference between an atom and an ion. (2 marks)
Use your periodic table, pick out which atom with the highest ionization energy in these lists: (1
mark each = 4 marks)
9.
a)
Na, Sr, Be, Rb
b)
B. Al, C, Si
c)
Fr, Fe, Zn, Cl
d) Cu, Ag, Au, B
10. Why is second ionization energy of atom always larger than its first ionization energy? (1 mark)
11. Which of the atoms in each of the following groups has the largest atomic radius? (1 mark each
= 3 marks)
a)
Cl, Si, K
b) Cs, Ca, Be
c) N, Al, Cl
12. Arrange these groups of atoms in order of increasing atomic radius: (1 mark each = 3 marks)
a) Xe, Ar, Kr

Answers

1) Element 35 is a gas

2) It would be in period 7

3) It would be a non metal

4) At would look more like iodine because both of them are closer down the group.

5) It can act both as metal and non metal.

6) Atom is neutral while ions have a charge

7) The second ionization energy is larger because it would take more energy to remove an electron from a positive specie

a) Cl has the largest atomic radius

b) Ca has the largest atomic radius

c) Cl has the largest atomic radius

8) In order of increasing atomic radius we have; Ar < Kr < Xe

What is the periodic table?

The periodic table is a tabular arrangement of the chemical elements, organized on the basis of their atomic number, electron configurations, and chemical properties.

The periodic table is one of the most important tools in chemistry, as it provides a convenient way to identify and categorize the elements. The elements are arranged in rows and columns, with elements in the same row having similar chemical and physical properties. The periodic table is used by scientists and students to understand the properties of elements, predict the chemical behavior of substances, and form hypotheses about new elements that have not yet been discovered.

Learn more about periodic table:https://brainly.com/question/11155928

#SPJ1

predict which of these is the most likely oxidation state and electronic configuration for a ruthenium cation:

Answers

The option where the most likely oxidation state and electronic configuration for a ruthenium cation is 3+ oxidation state, [Kr] 5s04d5. The correct answer C.

Ruthenium is a transition metal that belongs to Group 8 of the periodic table. It has several possible oxidation states, including +2, +3, +4, +5, and +6, with the +3 oxidation state being the most common. In this state, ruthenium has lost three electrons and has a +3 charge.

The +3 oxidation state is the most stable for ruthenium because it is close to a half-filled 4d subshell, which is a particularly stable electronic configuration. In the +3 oxidation state, ruthenium has three electrons in the 4d orbital, which is one electron away from a half-filled subshell.

Complete question:

Predict which of these is the most likely oxidation state and electronic configuration for a ruthenium cation:

A)2+ oxidation state, [Kr] 5s04d5

B)1+ oxidation state, [Kr]5s24d5

C)3+ oxidation state, [Kr] 5s04d5

D)3+ oxidation state, [Kr] 5s24d6

E)8+ oxidation state, [Kr]5s04d0

Learn more about The electronic configuration of a ruthenium cation:

https://brainly.com/question/1594176

#SPJ4

For NH4NO3(s) write a balanced equation. Add type of reaction and oxidation charges for each element if applicable.

Answers

In a redox reaction, there is a transfer of electrons

What is a balanced redox reaction?

The question is incomplete but it seems to have something to do with redox reactions.

A balanced redox reaction is a chemical equation that represents a redox (reduction-oxidation) reaction with the same number of atoms of each element on both the reactant and product sides and the same total charge on both sides. In a redox reaction, there is a transfer of electrons from one substance (the reducing agent) to another substance (the oxidizing agent).

In order to balance a redox reaction, you need to balance the number of atoms of each element in the reaction, and also balance the charges.

Learn more about redox reactions:https://brainly.com/question/13293425

#SPJ1

Using the count data and observational data you acquired, calculate the number of CFUs in the original sample. Number of CFUs = ____ CFUS You discover that the plate you selected had only been inoculated with 0.1mL of the dilution instead of 1ml. Using the count data and observational data you acquired, re-calculate the number of CFUs in the original sample. Number of CFUS = ____ CFUS

Answers

The number of CFUs in the original sample for Plate 3 is 460 CFUs.

What is CFU?

CFU stands for "colony-forming unit". It is a unit of measurement to estimate the number of viable bacteria or fungal cells in a sample. When a small number of microorganisms are present in a sample, it is not practical to count each individual cell. Instead, a dilution series is typically performed, where the sample is diluted in a series of steps and then plated onto a culture medium. Each viable cell is capable of growing into a visible colony on the culture medium. By counting the number of colonies formed on the plates, the number of CFUs per unit volume of the original sample can be estimated. The CFU is a useful measure because it reflects the number of viable cells that are capable of growing and potentially causing an infection or disease.

To calculate the number of CFUs in the original sample, we can use the following formula:

Number of CFUs = (colony count / volume plated) x dilution factor

Where:

colony count: the number of colonies counted on the plate

volume plated: the volume of the diluted sample plated on the plate (in mL)

dilution factor: the dilution factor of the sample (i.e. the reciprocal of the dilution used to prepare the sample)

Using the given data, we can calculate the number of CFUs in the original sample as follows:

For Plate 3:

Volume plated = 0.1 mL (since only 0.1 mL was inoculated instead of 1 mL)

Dilution factor = 1/1,000,000 = 0.000001 (since the sample was diluted 1:1,000,000)

Colony count = 46

Number of CFUs = (46 / 0.1) x 0.000001 = 460 CFUs

Therefore, the number of CFUs in the original sample for Plate 3 is 460 CFUs.

To know more about microorganisms, visit:

https://brainly.com/question/6699104

#SPJ1

The observed lines in the emission spectrum of atomic hydrogen are given by v~(cm−1)=RH(cm−1)(1n21−1n2)cm−1,n>n1 In the notation favored by spectroscopists, v~=1/λ=E/hc and RH=109,677 cm−1. The Lyman, Balmer, and Paschen series refers to n1 =1, 2, and 3, respectively, for emission from atomic hydrogen. Part A What is the highest value of v~ for the Lyman series? Express your answer using six significant figures. What is the highest value of v~ for the Balmer series? Express your answer using six significant figures. What is the highest value of v~ for the Paschen series? Express your answer using six significant figures. What is the highest value of E for the Lyman series? What is the highest value of E for the Balmer series?What is the highest value of E for the Balmer series?What is the highest value of E for the Paschen series?

Answers

The formula given relates the frequency of the photon emitted to the difference in energy levels of the hydrogen atom. The energy of the photon is given by

E = hν

where h is Planck's constant and ν is the frequency.

Part A:

The highest value of v~ for the Lyman series corresponds to the transition from n=2 to n=1. Plugging in the values, we get:

         v~ = RH(1/12 - 1/22) = 3.28984 x 1015 cm-1

The highest value of v~ for the Balmer series corresponds to the transition from n=3 to n=2. Plugging in the values, we get:

         v~ = RH(1/22 - 1/32) = 1.09737 x 1015 cm-1

The highest value of v~ for the Paschen series corresponds to the transition from n=4 to n=3. Plugging in the values, we get:

          v~ = RH(1/32 - 1/42) = 4.34013 x 1014 cm-1

To find the highest value of energy (E) for each series, we can use the relationship E = hν. Using Planck's constant (h) and the highest frequency (v~) for each series, we get:

For the Lyman series: E = hv~ = (6.626 x 10-34 J s)(3.28984 x 1015 s-1) = 2.18 x 10-18 JFor the Balmer series: E = hv~ = (6.626 x 10-34 J s)(1.09737 x 1015 s-1) = 6.626 x 10-19 JFor the Paschen series: E = hv~ = (6.626 x 10-34 J s)(4.34013 x 1014 s-1) = 2.76 x 10-19 J

Hence, the answer is,

The highest value of v~ for the Lyman series corresponds to the transition from n=2 to n=1. Plugging in the values, we get:

         v~ = RH(1/12 - 1/22) = 3.28984 x 1015 cm-1

The highest value of v~ for the Balmer series corresponds to the transition from n=3 to n=2. Plugging in the values, we get:

         v~ = RH(1/22 - 1/32) = 1.09737 x 1015 cm-1

The highest value of v~ for the Paschen series corresponds to the transition from n=4 to n=3. Plugging in the values, we get:

          v~ = RH(1/32 - 1/42) = 4.34013 x 1014 cm-1

Write a short note on the hydrogen spectrum.

The hydrogen spectrum refers to the pattern of lines that are observed when the emission spectrum of hydrogen is analyzed. It is caused by the excitation of electrons in hydrogen atoms, which emit light of specific frequencies as they return to lower energy states. The hydrogen spectrum consists of several series of lines, including the Lyman, Balmer, and Paschen series, which correspond to different electron transitions. The study of the hydrogen spectrum played a crucial role in the development of quantum mechanics and our understanding of atomic structure.

To find the highest value of energy (E) for each series, we can use the relationship E = hν. Using Planck's constant (h) and the highest frequency (v~) for each series, we get:

For the Lyman series: E = hv~ = (6.626 x 10-34 J s)(3.28984 x 1015 s-1) = 2.18 x 10-18 JFor the Balmer series: E = hv~ = (6.626 x 10-34 J s)(1.09737 x 1015 s-1) = 6.626 x 10-19 JFor the Paschen series: E = hv~ = (6.626 x 10-34 J s)(4.34013 x 1014 s-1) = 2.76 x 10-19 J

To learn more about hydrogen spectrum, follow the link:

https://brainly.com/question/6836691

#SPJ4

certain metabolic conditions will reduce flux through the tca cycle due to an increase in tca cycle inhibitors. elevation of which of the following would be an example of a compound that will reduce activity through the tca cycle?

Answers

Elevation of ATP (adenosine triphosphate) would be an example of a compound that will reduce activity through the TCA cycle.

The TCA cycle also known as the citric acid cycle or Krebs cycle, is a series of metabolic reactions that occur in the mitochondria of cells and play a crucial role in the production of energy. However, under certain metabolic conditions, the flux through the TCA cycle can be reduced due to an increase in TCA cycle inhibitors.

One such inhibitor is ATP, which is the primary energy currency of the cell.

When ATP levels are high, it signals to the cell that there is enough energy available and there is no need to produce more through the TCA cycle.

As a result, the activity of the TCA cycle is reduced, leading to a decrease in the production of energy.

To know more about TCA cycle, refer here:

https://brainly.com/question/15561070#

#SPJ11

What is the maximum number of electrons that can be identified with the following set of quantum numbers?

n = 6
l = 1
ml = -1

Answers

The orbital can only take two electrons.

What is the maximum number of electrons that the orbital can contain?

The maximum number of electrons that an orbital can contain is determined by its angular momentum quantum number, "l", and its spin quantum number, "m_s". For a given value of "l", an orbital can contain 2l + 1 electrons with different values of "m_s", each of which can have either spin "up" (m_s = +1/2) or spin "down" (m_s = -1/2). The maximum number of electrons in an orbital is thus 2(2l + 1), with half of the electrons having one spin orientation and the other half having the opposite spin orientation.

We know that we can be able to obtain the number of electrons by looking at the quantum numbers;

n = 6

l = 1

ml = -1

Since we know that it is a px orbital then it can take two electrons.

Learn more about quantum numbers:https://brainly.com/question/16977590

#SPJ1

make the structure of pamitoleic acid. show your photo below with a lasso around the double bond structure in the carbon chain.

Answers

The chemical formula of pamitoleic acid is CH₃(CH₂)5CH=CH(CH₂)₇COOH. The structure of pamitoleic acid is given in the image attached below.

Palmitoleic acid has been known to have a lot of beneficial effects on insulin sensitivity, cholesterol metabolism, and hemostasis. It has been concluded that palmitoleic acid may prevent beta-cell apoptosis induced by glucose or saturated fatty acids.

Recently, studies have reported that palmitoleic acid is useful in treating disorders related to skin hyperpigmentation, fibrosis and as an adjuvant in formulations for the treatment of secondary infections caused by gram-positive bacteria.

Palmitoleic acid is one of the most common acids which is found in omega-7 fatty acids.

Learn more about palmitoleic acid from the link given below.

https://brainly.com/question/7393295

#SPJ4

Developing and stockpiling hydrogen bombs. b. Aiding South Korea in the Korean War. c. Setting the goal of a moon landing. d. Instituting the Berlin Airlift.

Answers

Throughout the Korean War, South Korea received significant support from the United States.

Throughout the Korean War, the United States significantly supported South Korea militarily, economically, and politically. This involved deploying US soldiers to fight alongside South Korean forces, supplying them with equipment and supplies, and taking part in talks with North Korea. As part of its military assistance, the United States sent personnel and supplies, supported air and sea operations, and provided arms and ammunition. In the years following the war, the U.S. also gave South Korea economic and military assistance, assisting in the nation's reconstruction and fortifying its defences.

learn more about Korean War Refer:brainly.com/question/11375126

#SPJ4

complete question:What part did the United States play in the Korean War when it came to supporting South Korea? a.Building up a supply of hydrogen bombs. b. Supporting South Korea in the Korean War. c. Having a moon landing as a goal. d. Starting the Airlift to Berlin.

Which of the following statements would only dump the data definitions and not the data of the mydatabase to backup.sql? a. pg_dump mydatabase > backup.sql b. pg_dump -a mydatabase > backup.sql c. pg_dump -s mydatabase > backup.sql d. pg_dump -d mydatabase > backup.sql

Answers

The option that would only dump the data definitions and not the data of the mydatabase to backup.sql is pg_dump -s mydatabase > backup.sql.

a. pg_dump mydatabase > backup.sql will dump the entire contents of the database, including both the data and the data definitions.

b. pg_dump -a mydatabase > backup.sql will dump only the data (i.e., it will append to the file) and not the data definitions.

c. pg_dump -s mydatabase > backup.sql will dump only the data definitions (i.e., the schema) and not the data.

d. pg_dump -d mydatabase > backup.sql will dump both the data and the data definitions.

Hence the correct option is C.

To know more about backup.sql here

https://brainly.com/question/13429347

#SPJ4

3 Cu + 8HNO3 --> 3 Cu(NO3)2 + 2 NO + 4 H2OIn the above equation how many grams of water can be made when 4 grams of HNO3 are consumed?Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:Element Molar MassHydrogen 1Nitrogen 14Copper 63.5Oxygen 16

Answers

The coefficient of [tex]$\mathrm{HNO}_3$[/tex] exists 8 , and [tex]$\mathrm{H}_2 \mathrm{O}$[/tex] exists 4.

What is meant by molar mass?

The ratio between a sample's mass and its substance content is known as the molar mass of a chemical compound in chemistry. A substance's molar mass is a bulk attribute rather than a molecular one.

One mole of a material is weighed to determine its molar mass. Add the masses of all the components in a molecule to determine the molecular mass of the molecule by multiplying the subscript (number of atoms) by the atomic mass of each element in the molecule.

The first step will be to convert 144.1 grams of [tex]$\mathrm{HNO}_3$[/tex] to moles. To estimate the molar mass

[tex]$$1(1.0)+1(14)+3(16)=1+14+48=63 \mathrm{~g} / \mathrm{mol}$$[/tex]

[tex]$144.1 \mathrm{gHNO}_3 \times \frac{1 \mathrm{~mol} \mathrm{HNO}_3}{63 \mathrm{gHNO}_3}=2.287 \mathrm{~mol} \mathrm{HNO}_3$$[/tex]

Moles of [tex]$\mathrm{HNO}_3$[/tex] you're starting with, utilize the ratio of moles in the equation to find the moles of [tex]$\mathrm{H}_2 \mathrm{O}$[/tex] produced. The coefficient of [tex]$\mathrm{HNO}_3$[/tex] exists 8 , and [tex]$\mathrm{H}_2 \mathrm{O}$[/tex] exists 4

[tex]$$\begin{aligned}& 2.287 \mathrm{moHHO}_3 \times \frac{4 \mathrm{~mol}}{ 8 \mathrm{moH}_3} \mathrm{H}_2 \underline{\mathrm{O}}=1.144 \mathrm{~mol} \mathrm{H}_2 \mathrm{O} \\&\end{aligned}$$[/tex]

Rounded to the nearest tenth, 1.1 moles [tex]$\mathrm{H}_2 \mathrm{O}$[/tex].

To learn more about molar mass refer to:

https://brainly.com/question/837939

#SPJ4

f the following four solutions, which one has both the lowest freezing point and the highest boiling point? select an answer and submit. for keyboard navigation, use the up/down arrow keys to select an answer. a 1.0 m magnesium phosphate b 1.0 m sodium chloride c 1.0 m calcium chloride d 1.0 m aluminum nitrate

Answers

The 1.0 m calcium chloride solution has the lowest freezing point and the greatest boiling point among the four solutions. In solution, calcium chloride, a salt, splits into three ions (Ca2+ and two Cl-).

What is colligative property?

A colligative property of a solution is a physical property that depends on the number of solute particles present in the solution and not on their chemical identity. Examples of colligative properties include the lowering of the freezing point, the elevation of the boiling point, vapor pressure lowering, and osmotic pressure. These properties are related to the changes in the physical behavior of a solvent caused by the presence of solute particles, such as a reduction in the solvent's vapor pressure or an increase in its boiling point. Colligative properties are important in various fields, including chemistry, materials science, and biology.

Hence, the answer is, of the four solutions, 1.0 m calcium chloride has both the lowest freezing point and the highest boiling point.

To learn more about colligative properties, follow the link:

brainly.com/question/29971068

#SPJ4

measurements show that the energy of a mixture of gaseous reactants increases by 207. kj during a certain chemical reaction, which is carried out at a constant pressure. furthermore, by carefully monitoring the volume change it is determined that 181. kj of work is done on the mixture during the reaction. Calculate the change of energy of the gas mixture during the reaction in kJ.

Answers

Change in energy = 207. kJ - 181. kJ = 26. kJ

What is energy?

Energy is the ability to do work. It is the capacity to do something or to cause change. It can be found in many forms such as kinetic, electrical, chemical, nuclear, gravitational, thermal, and sound energy. It is all around us and is necessary for life. It is used to power everyday activities and to provide heat, light and motion. It can be produced by natural sources such as the sun or through human efforts such as burning fossil fuels. Energy can also be stored in batteries, fuel cells and other forms. Knowing how to use energy efficiently is important in today's world.

Therefore, Change in energy = 207. kJ - 181. kJ = 26. kJ

To learn more about energy

Here: https://brainly.com/question/2003548

#SPJ4

Whats the difference between genetic information of the parent cell with that of each of the two daughter cells

Answers

Daughter cells have half the number of chromosomes. Daughter cells are genetically identical with each cell and with the parent cell.

help please, balance the elements

Answers

The balanced form of the equations given above is as follows:

2Na + F₂ → 2NaF2Cl₂ + 7O₂ → 2Cl₂O₇3Ca + N₂ → Ca₃N₂

What is a chemical equation?

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation are the same.

According to this question, some equations are given. The balanced form of these equations using coefficients are given in the main answer part.

Learn more about balanced equation at: https://brainly.com/question/28294176

#SPJ1

When a solution of sodium hydroxide is mixed with a solution of magnesium chloride, a precipitate forms. Choose the correct total ionic equation for the reaction between sodium hydroxide and magnesium chloride. a. MgCl2 (aq) + 2 NaOH (aq)助 Mg(OH)2 (aq) + 2 NaCl (s) b. Mg2 (a)+C (a) Na* (a)+OHa)MgtOH)2 (s)+ Na (aq)+Cr (a) c. Mg2 (a)+2 OH (a) Mg(OH)2 (s) d. Mg2 (aq) 2 Cl (aq) + 2 Nat (aq)2 OH (aq) >Mg(OH)2 (s) 2 e. Nat (aC Na (a)+cl (aq) adens 2 NaCI (s) f. MgCl2 (aq) + 2 NaOH (aq) ndra Mg(OH)2 (s) + 2 NaCl (aq) (aq)

Answers

The correct total ionic equation for the reaction between sodium hydroxide and magnesium chloride is

option f. MgCl2 (aq) + 2 NaOH (aq) → Mg(OH)2 (s) + 2 NaCl (aq).

Here's the step-by-step explanation:

1. First, we need to write the balanced chemical equation for the reaction between sodium hydroxide and magnesium chloride. This equation is: MgCl2 (aq) + 2 NaOH (aq) → Mg(OH)2 (s) + 2 NaCl (aq)

2. Next, we need to write the total ionic equation by breaking all of the soluble compounds into their respective ions. This gives us: Mg2+ (aq) + 2 Cl- (aq) + 2 Na+ (aq) + 2 OH- (aq) → Mg(OH)2 (s) + 2 Na+ (aq) + 2 Cl- (aq)

3. Finally, we can cancel out the spectator ions, which are the ions that appear on both sides of the equation and do not participate in the reaction. In this case, the spectator ions are Na+ and Cl-. This gives us the net ionic equation: Mg2+ (aq) + 2 OH- (aq) → Mg(OH)2 (s)

So, the correct total ionic equation for the reaction between sodium hydroxide and magnesium chloride is option f. MgCl2 (aq) + 2 NaOH (aq) → Mg(OH)2 (s) + 2 NaCl (aq).

To know more about sodium hydroxide, refer here:

https://brainly.com/question/29327783#

#SPJ11

Other Questions
When each side of a composition is exactly the same, it showsa. asymmetrical balance.b. perfect proportion.c. absolute symmetry.d. visual weight. he interview process has gone well. There are a few things that need clarification and what really happens when specific financial analysts use the system. Which of the following might be the best way to verify what does happen?Observation of how the analysts do their work evaluate the most significant similarity between the french revolution of 1789-1799 and the revolutions of 1948 PLS SOME1 HELP ITS DUE IN 20 MIN!!!!!!!!!!!!!!!!!!!!!!!A quilter created the following shape to use in a block for a new quilt. A six-sided figure with a large base of 10 and three-fifths inches. The side to the right of the base is 6 inches. The small side parallel to the base is 4 and one-fifth inches. There are two sides that form a point at a right angle. The smaller is 4 inches, and the larger is 5 inches. What is the area of the shape for the quilt block?. a drug that aims to treat addiction is likely to target which part of the brain? We make 72 cookies and 18 cookies are eaten. What fraction represents the portion of the whole batch that remains? Suppose the data have a bell-shaped distribution with a mean 30 and a standard deviation of 5. Use the empirical rule to determine the percentage of data between 15 and 45.Select one:a. 95.00%b. 97.35%c. 99.70%d. 81.50% What is Donald Henry Gaskins? Describe protons Location: Change: Mass: Determine the approximate circumference of a circle that has an area of 200. 96 cm 2. what options do butterflies have for regulating their body temperature If the length of diagonal of square is 2 then what is the length of each side ? explain what you know about alchemy Materials fracture when the force per unit area, called STRESS, exceeds a critical value. In general, the critical stress depends on the direction as well as the magnitude of the force. For example, bones break differently when subjected to torsional (twisting) stress than when subjected to compressional (or squeezing) stress. Let us consider compressional stress. Wet human bone for 20-39 year olds has an ultimate compressive strength of 1.6x104N/cm2 81. Consider a person who falls from a height to the ground. Upon landing, the person's kinetic energy is converted to work. If the person decelerates over a distance ? h, we can estimate the average force during the collision by Kinetic Energy :-ny' . Work : | F d: Fah If a person lands stiff-legged on a hard surface and doesn't bounce, the deceleration occurs over a very short distance, ? h ~ 1 cm. Since the force is transmitted up the leg, the stress is greatest where the cross-sectional area is least, ie, the tibia just above the ankle [8]. The following lists some different conditions that may occur during landing and physical explanations for why they make bone fracture from a fall more or less likely [8: (a) bounce [more likely. The impulse is twice as large for an elastic collision as for an inelastic collision.] (b) bent knees less likely. Bending the knees increases the time and distance over which deceleration occurs, which reduces the force] (c) landing in loose earth or sand less likely. This increases A h which reduces F (d) turning the body to land on the side less likely. This increases ? h. It also distributes the force widely over the body (increases A)?thereby reducing the stress] According to the three value disciplines model, companies who primarily pursue customer intimacy values could use their technologies more on ______________. Determine the mass fraction of hydrochloric acid obtained by merging 100 cm3 of a solution of hydrochloric acid with a mass fraction of HCl 36% (density 1.180 g/cm3) and 50 cm3 of a solution of hydrochloric acid with a mass fraction of HCl 20% (density 1.100 g/cm3) Are the following languages context-free or not? If yes, specify a context-free grammar in BNF notation that generates the language. If not, give an informal argument.1.{anbmc | m> 0, n0,o > 0} , with alphabet , = {a,b,c}2. {anbmc | n 0, o > 0 } , with alphabet , = {a,b,c}3. {anbncn | n > 0 } , with alphabet = {a,b,c}4. { Anbn | n 0 } , with alphabet = {a,b}5. {wwR | w E and wR is w in reverse} , with alphabet = {a,b}6. {anbmcmdn | n 0, m 0 } , with alphabet = {a,b,c,d}7. {Anbmcmdn | n 0 , m 0 , with alphabet = {a,b,c, d}8. {anbncmdm | n 0 , m 0 = {a, b , c, d} 9. {ananbnbn | n 0 } with alphabet = {a,b}10. {w | w has more than 5 symbolz}, with alphabet = {a,b}Which of the languages are also regular languages, Le., can be expressed by a regular expression? Prove it by giving the regular expression that specifies the language. which of these assumptions are made in the rational model of decision making? Which type of forces are subjected in truss? Bacteria colonies can increase by 45% every 7 days. If you start with 200 bacteria microorganisms, how large would the colony be after 35 days? First, identify I, the starting amount. Future Amount = [?](1+ Remember: Future Amount = (1 + r)t