Need help on question 53

The dissociation of water is H2O + H2O <==> H3O+ + OH–

Dissociation of water:

The water molecule dissociate into the hydroxyl ion and hydrogen ion. The hydrogen ion immediately protonate the other water molecule and form the hydronium ion.

Chemical equation:

H2O + H2O <==> H3O+ + OH–

The equilibrium constant of self ionization of water is given below:

Kw= [H3O+][OH-]

[H3O+] is the concentration of hydronium ion while [OH-] is the concentration of hydroxyl ion.

Kw is called ionic product of water. The value of Kw is 1.0 × 10∧-14  at 25 °C.

The pure water consist of equal concentration of hydroxyl and hydrogen ions. In order to determine the molarity of both ions square root of ionic product (Kw) is taken.

  [OH-]=[H+]= 1.0 × 10∧-7 M

In case of acidic solution concentration f hydrogen ions are greater than hydroxide ions. For example,

HCl when dissociate into water gives H+ and Cl-. The H+ ions increases in solution. The equilibrium is this given by water.

H2O ⇆ H+ + OH-

Reaction is forced to wards left. As a result concentration of hydroxide ions decreases.

Hence above given is a correct answer.

To know more about Dissociation of water follow link

https://brainly.com/question/13378385

#SPJ4

The freezing point of a solution of 40.0 g benzoic acid is 5.245 °C.

The freezing point depression of a solution can be calculated using the equation ΔTf = Kf × molality, where ΔTf is the change in the freezing point, Kf is the molal freezing point depression constant, and molality is the concentration of the solute in mol/kg of solvent.

The molality of the solution can be calculated by dividing the mass of the solute (40.0 g of benzoic acid) by the mass of the solvent (800.0 g of benzene) and converting the result to moles.

Molality = (40.0 g of benzoic acid) / (800.0 g of benzene) = 0.05 mol/kg

Next, we can calculate the change in the freezing point using the equation ΔTf = Kf × molality

ΔTf = (5.10 °C/m) × (0.05 mol/kg) = 0.255 °C

Finally, we can calculate the freezing point of the solution by subtracting the change in the freezing point from the freezing point of the pure solvent.

Freezing point of solution = (Freezing point of pure solvent) - ΔTf = (5.50 °C) - (0.255 °C) = 5.245 °C

The freezing point of the solution of 40.0 g of benzoic acid dissolved in 800.0 g of benzene is 5.245 °C.

Learn more about benzoic acid:

brainly.com/question/15394817

#SPJ4

The number of signals these molecules release in a 1H NMR spectrum can be calculated using the number of distinct hydrogens on one side of a symmetry plane.

Natural gas, sometimes known as methane, is a filthy alternative to hydrogen. It is thought to account about 75% of universe's mass and is the most common chemical element. On Earth, there are a lot of hydrogen atoms in water, plants, animals, plus, of course, us.

The two additional hydrogen isotopes are Deuterium and Tritium, whereas the common synthesis gas H is known as proton. Out of all the elements, only hydrogen's isotopes have been given unique names. The two have their purposes.

To know more about hydrogen visit:

https://brainly.com/question/28937951

#SPJ4

You will need 60ml of the 75% solution to add to the 240ml of a 25% alcohol mixture.

A solution is a specific kind of homogenous mixture made up of two or more components that is used in chemistry. A solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture. The solvent particles will pull the solute particles apart and surround them if the attractive forces between the solvent and solute particles are stronger than the attractive forces holding the solute particles together. The particles of the solute that are enclosed by the solid solute subsequently disperse into the solution.

Now m be the amount of the 75% mixture and you have 240ml of the 25% alcohol mixture.

75% m + 25%(240) = 35%(m + 240)

75/100m + 25/100 × 240 = 35/100m + 35/100 × 240

divide all by 5 to get,

15/20m + 5/20 × 240 = 7/20m + 7/20 × 240

multiply by 20 to get

15m + 1200 = 7m + 1680

Then it will reduces to,

8m = 480

m = 60ml.

To learn more about alcohol mixture visit,

https://brainly.com/question/14777564

#SPJ4

The temperatures that can be achieved for a sample of matter are:

-300.0°C

0°C

0 K (or 0°C) is the lowest possible temperature that can be attained theoretically, and -300.0°C is a temperature that can be achieved for a sample of matter. 300.0°F and 0°F are temperatures in the Fahrenheit scale, and are not applicable in this context as the temperatures given are in the Celsius scale. All the temperatures listed can be achieved for a sample of matter except 0 k which is the lowest possible temperature that can be attained theoretically and has no practical meaning in terms of a temperature scale. 0°F and 300.0°F can be achieved as well as they are both on the Fahrenheit temperature scale where 0°F is the freezing point of water and 300.0°F is a high temperature.

Learn more about temperatures here:

https://brainly.com/question/6325043

#SPJ4

If a acid chemical is spilled in lab, then the first step to take is neutralize the spill with baking soda. So, correct answer is option (a).

Both acids and bases can be corrosive to some degree, depending on the extent to which they've been diluted with water; this affects their concentration and strength. Some examples of corrosive acids are nitric acid and sulphuric acid. The acid with the strongest corrosive effect on human skin is hydrochloric acid. If acid is spilled in the laboratory, it should be immediately neutralized with a strong base, such as sodium bicarbonate. Neutralization is defined as a chemical reaction in which an acid and a base react with each other quantitatively.

To learn more about Acid, refer:

https://brainly.com/question/25148363

#SPJ4

Complete question:

if a acid chemical is spilled in lab, what action should you take first? select one:

a)neutralize the spill with baking soda.

b)surround the spill with absorbent.

c) dilute the spill with water.

d) notify the lab instructor or ta.

All the functional groups except ether are present in the molecule.

A functional group is a group of atoms in a molecule with distinguished chemical properties, any way of the other atoms in the molecule. The atoms in a functional group are associated with each other and to the rest of the molecule by covalent bonds. However, sodium is an element, a metal, it is not a functional group.

Some of the main functional groups in biological molecules involve hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl groups. These groups play an important role in the genesis of molecules like DNA, proteins, carbohydrates, and lipids.

So we can conclude that The functional groups perform a vital activity in producing molecules like proteins, DNA, lipids, and carbohydrates.

Learn more about the functional groups here: https://brainly.com/question/10058230

#SPJ1

In the given chemical reaction, 4HCI (g) reacts with O2 (g) to form 2H2O (g) and 2Cl2 (g). If we consider 4HCI as the reactant with the most initial moles, then its chemical formula is HCl.

HCl, or hydrogen chloride, is a colorless and highly reactive gas that is widely used in various industrial processes. It is commonly used as a starting material for the production of other chemicals such as PVC and Teflon. In this reaction, HCl moles reacts with O2 to form H2O and Cl2. H2O, or water, is a common and essential compound reaction that is widely used in various industries, including agriculture, pharmaceuticals, and personal care products. Cl2, or chlorine, is a highly reactive gas that is widely used in the production of various moles chemicals, such as bleach and other disinfectants. In conclusion, the chemical reaction moles between 4HCI and O2 can result in the formation of water and chlorine, which have significant industrial applications. The most number of initial moles are of HCL

Learn more about moles here:

https://brainly.com/question/15356425

#SPJ4

40.22 kJ of heat are required to convert 18 grammes of water at 20°C into water vapour at the boiling point.

The boiling point of a substance is the temperature at which a liquid's vapour pressure matches the pressure around it and the liquid condenses into a vapour.  Different liquids will boil at various temperatures and pressures. The heat required to change a substance from a liquid to a gas is called the enthalpy of vaporization, or ∆Hvap. The amount of heat required to vaporize a given amount of a substance can be calculated using the equation:

q = m x ∆Hvap

here q is heat required, m is mass of the substance, and ∆Hvap is enthalpy of vaporization.

For water, the enthalpy of vaporization at its boiling point (100°C) is 40.7 kJ/mol. To convert this to kJ/g, we can divide by the molar mass of water, which is 18.015 g/mol:

= ∆Hvap

= 40.7 kJ/mol / 18.015 g/mol

= 2.268 kJ/g

So, to vaporize 18 g of water at 20°C, we need:

= q

= 18 g x 2.268 kJ/g

= 40.22 kJ

This is the amount of heat that must be added to the water to change it from a liquid at 20°C to a gas at the boiling point (100°C).

To know more about boiling point please refer:

https://brainly.com/question/2153588

#SPJ4

Pa law regulating what factories can emit into the air and pour out onto the ground is the mot effective way to decreae water pollution.

What are the different methods used to decrease water pollution?

There are several methods used to decrease water pollution. One method is to regulate industrial and agricultural practices, such as implementing laws that control the amount of pollutants that can be discharged into waterways. Another method is to improve sewage treatment processes, so that waste is properly treated before being released into the environment. Additionally, implementing best management practices in agriculture, such as reducing fertilizer and pesticide use, can help decrease water pollution. The use of green infrastructure, such as rain gardens, can also help reduce runoff and prevent pollutants from entering waterways. Educating the public and promoting sustainable practices, such as reducing single-use plastic usage, can also help decrease water pollution. Each method has its own strengths and limitations, and a combination of approaches may be needed to effectively decrease water pollution.

To know more about water pollution visit: https://brainly.com/question/30490520

#SPJ4

The term "polyatomic ion" tells us that we are working with a covalent covalent particle made of two or more atoms, joined to form a unit. Therefore, option B is correct.

Polyatomic ions are ions that have more than one atom. Nitrate ion, NO3-, for example, has one nitrogen atom and three oxygen atoms. A polyatomic ion's atoms are usually covalently bonded to one another and thus remain together as a single, charged unit.

Polyatomic ions are ions composed of two or more atoms joined by covalent bonds but with a net electron deficiency or surplus, resulting in an overall charge on the group.

Thus, option B is correct.

To learn more about the polyatomic ion, follow the link;

https://brainly.com/question/12852496

#SPJ1

To make a loaf of bread with a maximum of 30 servings, you should use a yeast to flour ratio of 1:200.

If you're making a loaf of more than 30 servings, use a ratio of 1:180. This ratio ensures that you have enough yeast to properly rise the dough, while preventing the bread from becoming too dense.

If the ratio is too high, the bread will not rise as much as desired, resulting in a denser loaf. If the ratio is too low, the bread will not have enough structure and will be too soft.

Learn more about chemical reactions during cooking

https://brainly.com/question/21493831

#SPJ4

sp2-hybridized carbon atoms in the structure CH2=CHOCH2CH=CH2 are B) 4.

There are 4 sp2-hybridized carbon atoms in the structure shown. The hybridization of carbon atoms can be determined by counting the number of sigma bonds and lone pairs of electrons attached to each carbon atom. In the structure shown, each sp2-hybridized carbon atom is bonded to 3 other atoms (2 other carbons and 1 hydrogen or another element) and has no lone pairs of electrons. Therefore, there are 4 sp2-hybridized carbon atoms in the structure.

Carbon atom is sp2 hybridized when bonding takes place between 1 s-orbital with two p orbitals.

To know more about sp2-hybridization , refer

https://brainly.com/question/17426049

#SPJ4

The atomic number or the number of protons in an atom are two properties that can be used to identify an element. The number of neutrons and electrons is frequently equal to the number of protons, but this can vary depending on the atom.

The atomic number of an element is the number of protons, whereas the mass number is the number of protons plus the number of neutrons.

Because different elements have different numbers of protons and electrons, their atomic structures differ. This explains why different elements have distinct properties.

The chemical elements are ordered from left to right and top to bottom by increasing atomic number, or the number of protons in an atom's nucleus, which generally corresponds to increasing atomic mass.

The atomic symbol, atomic number, and mass number of an element are important characteristics in the periodic table. Dmitri Mendeleev, a Russian chemist, is credited with designing the modern periodic table. Only 63 elements were known when he designed his periodic table.

To learn more about the atomic number, follow the link;

https://brainly.com/question/16858932

#SPJ1

If 40. 0 g of HCl reacts with an excess of magnesium metal,  the theoretical yield of hydrogen is 2.218 g .

Hydrochloric acid (HCl) is a strong, highly corrosive acid that is commonly used in a variety of industrial and laboratory applications. It is a clear, colorless solution that has a pungent, irritating odor. HCl is highly soluble in water and forms an aqueous solution that has a pH of about 1.

The reaction between hydrochloric acid (HCl) and magnesium metal can be represented by the following equation:

HCl(aq) + Mg(s) -> MgCl2(aq) + H2(g)

The theoretical yield of hydrogen can be calculated by using the stoichiometry of the reaction. If 40.0 g of HCl reacts with an excess of magnesium metal, the number of moles of HCl can be calculated as:

n = mass / molar mass = 40.0 g / 36.5 g/mol = 1.097 mol

The stoichiometry of the reaction tells us that one mole of HCl will produce one mole of hydrogen gas. Therefore, the theoretical yield of hydrogen would be:

n = 1.097 mol * 1 mol/mol = 1.097 mol

The mass of 1.097 moles of hydrogen gas can be calculated as:

mass = n * molar mass = 1.097 mol * 2.016 g/mol = 2.218 g

Therefore, If 40. 0 g of HCl reacts with an excess of magnesium metal,  the theoretical yield of hydrogen is 2.218 g

To know more about HCl refer to:

brainly.com/question/30233723

#SPJ4

Cementation is when chemical precipitates fill in the voids between clasts. Option C is the correct alternative here>

Cementation is a process in geology where minerals precipitate from solution and fill in the spaces (or voids) between clasts, which are individual rock fragments or particles.

The precipitation of these minerals forms a solid mass, or rock, by bonding the clasts together. This process is one of the steps in the formation of sedimentary rocks, which are rocks that form from the accumulation of sediment such as sand, silt, and clay.

The type of mineral cement that forms can depend on the environment and the minerals that are present in the surrounding rock. For example, in a marine environment, the mineral calcite may be the cementing material, while in a more silica-rich environment, the mineral quartz may be the cementing material.

To know more about cementing here:

https://brainly.com/question/26233012#

#SPJ11

The values of the three quantum numbers are n = 3, l = 4, and ml = 0.

Quantum is a term used to describe the smallest possible unit of a physical quantity, such as energy. It is the fundamental building block of all matter and is the basis of modern quantum mechanics. Quantum mechanics is a branch of physics that deals with the behavior of matter and energy on the atomic and subatomic level. In quantum mechanics, particles of matter and energy are described by wave-like equations, and the behavior of these particles is unpredictable and usually counterintuitive.

The correct answer is D- n =3; l =4; ml =0.

The three quantum numbers specify an orbital in the hydrogen atom are the principal quantum number (n), the angular momentum quantum number (l), and the magnetic quantum number (ml). The values of these three quantum numbers must satisfy the following conditions:

1. The principal quantum number (n) must be a positive integer: n = 1, 2, 3, 4, etc.

2. The angular momentum quantum number (l) must be an integer between 0 and n-1: l = 0, 1, 2, ..., n-1.

3. The magnetic quantum number (ml) must be an integer between -l and +l: ml = -l, -l+1, -l+2, ..., 0, ..., +l-2, +l-1, +l.

In the case of option D, the values of the three quantum numbers are n = 3, l = 4, and ml = 0. This does not satisfy the condition for l, which must be an integer between 0 and n-1. Therefore, option D is the correct answer.

To learn more about quantum

https://brainly.com/question/25786066

#SPJ4

If the enthalpy of vaporization of substance E is greater than that of substance F, then substance E has a lower vapor pressure at any temperature where both substances are liquid.

What is vaporization?

Vaporization is the process of a substance changing from a liquid state to a gaseous state, due to an increase in temperature or pressure. It is the reverse process of condensation, where a gas changes into a liquid. Vaporization can occur either at the surface of a liquid, where the molecules have sufficient energy to escape the liquid state and become a gas, or throughout the bulk of the liquid, where enough energy is supplied to cause the liquid to boil.

This is because the enthalpy of vaporization represents the amount of energy required to convert a given amount of a substance from the liquid state to the gaseous state. A substance with a higher enthalpy of vaporization requires more energy to be converted, and therefore has a lower vapor pressure.

To learn more about vaporization:

https://brainly.com/question/26306578

#SPJ4

Nemotin is a diterpenoid natural substance with a carbocyclic ring system as its main structural component.

Analyzing the bonding configurations of the carbon atoms in nemotin allows one to assess the degree of hybridization.

Usually, sp hybridization occurs between carbon atoms that are bound to one or two other atoms and form a linear or angular shape. Typically, sp3 hybridization occurs in tetrahedral structures made of three bonded carbon atoms. Typically, sp2 hybridization occurs when four carbon atoms are linked together to form a trigonal planar or tetrahedral structure.

Since the carbons in the carbocyclic ring structure of nemotin are connected to four other atoms and arrange themselves in a planar manner, they are most likely sp2 hybridized. Depending on their bonding configurations, the carbons on the side chains connected to the ring system may be either sp3 or sp2 hybridized.

Learn more about carbocyclic ring:

brainly.com/question/19755726

#SPJ4

Yes, the following mechanism consistent with the data. As based on the graph , we can conclude that the reaction order is second order reaction with respect to NO.

The chemical reaction is :

2NO  +  Cl₂  ---->  2NOCl

The mechanism :

NO  +  Cl₂  ⇄ NOCl₂       (fast)

NOCl  +  NO   ---->  NOCl    (slow)

The Rate = k [NOCl₂] [NO]

k [NO] [ Cl₂ ] = k' [NOCl₂ ]

[NOCl₂  ] = K/K'  [NO] [ Cl₂ ]

The rate = k  K/K'  [NO] [ Cl₂ ] [NO]

This confirms that the reaction order is second order with respect to the [NO]. But not the Cl₂.

To learn more about rate here

https://brainly.com/question/14808240

#SPJ4

False. Reverse-phase chromatography (HPLC) separates peptides based on their hydrophobicity and charge, not their molecular weight.

Reverse-phase chromatography (HPLC) separates peptides based on their hydrophobicity and charge, not their molecular weight. HPLC works by running a sample of peptides through a column containing a stationary phase, which is usually a hydrophobic material such as silica gel or alumina. The peptides then interact with the stationary phase, and the ones that are more hydrophobic will be retained in the column longer than the ones that are more hydrophilic, resulting in a separation of the peptides based on their hydrophobicity and charge.

To know more about chromatography please refer:

https://brainly.com/question/26491567

#SPJ4

The molecule formed by 2 hydrogen atoms (H2) is stable because: It is held together by a covalent bond, It has no unpaired electrons, It has no net charge.

It is held together by a covalent bond, which is a type of chemical bond formed by the sharing of electrons between atoms.

It has no unpaired electrons, meaning that each hydrogen atom has a full complement of electrons, resulting in a more stable molecule.

It has no net charge, meaning that the positive and negative charges within the molecule are balanced, resulting in a neutral overall charge.

Hydrogen gas (H2) is a simple molecule composed of two hydrogen atoms bonded together by a covalent bond. A covalent bond is a chemical bond that forms when two atoms share electrons in order to fill their valence shells and become more stable. In the case of H2, each hydrogen atom contributes one electron to the bond, and the electrons are shared between the two atoms.

Learn more about unpaired electrons here:

https://brainly.com/question/29656941

#SPJ4

The molar mass of pristane is 204.4 g/mol.

To calculate the molar mass of a compound, you need to use the chemical formula to determine the number of atoms of each element in the compound.

Then, you can use the atomic weights of each element to calculate the total molar mass. For example, if the compound is water (H2O), the molar mass would be 2 (atomic weight of hydrogen) + 16 (atomic weight of oxygen) = 18 g/mol.

Molar mass is the mass of one mole of any substance. It is defined as the amount of a substance that contains a certain number of molecules or atoms.

Learn more about the molar mass

https://brainly.com/question/21334167

#SPJ4

A hydrogen atom, R group, and a carbon atom are all connected by bonds. The amino acid side chain refers to this R group, which differs from one amino acid to another. Among the twenty biologically significant amino acids, five have unique side chains (R). Thus, option D is correct.

Each amino acid contains a carbon atom at its core, known as the two to which four groups are attached: a hydrogen atom, a carboxylic acid group, an amine group, and an R-group, also known as a variable group or side chain.

The alpha carbon in every amino acid is joined to a hydrogen atom, a carboxyl group, and an amino group. These protein monomers differences from one another are governed by the R group, which alternates between amino acids.

Therefore, Amino acids always contain a sulphur atom in their R-side group.

Learn more about amino acids here:

https://brainly.com/question/28409615

#SPJ4

Answer: B: Polarity

Explanation:

The energy required to sublime 15 grams of Naphthalene is 8.54 kJ.

To find the amount of energy needed to sublime 15.0 g of naphthalene, we need to first determine the number of moles of naphthalene, and then multiply that by the heat of sublimation.

First, we need to find the number of moles of naphthalene:

15.0 g / 128.17 g/mol = 0.117 mol

Next, we need to multiply the number of moles by the heat of sublimation:

0.117 mol * 72.9 kJ/mol = 8.54 kJ

So, the energy needed to sublime 15.0 g of naphthalene is 8.54 kJ.

Find more about Sublimation here: https://brainly.com/question/28626755

#SPJ4

At STP, the molar mass of gas with mass 0.400 g is equals to the 32.2580 grams per mole.

We have a gas in STP ( standard temperature and pressure) condition. Our goal in this problem is to calculate the molar mass of the gas.

Volume of gas, V = 0.280 litre

Mass of gas = 0.409 g

STP is nothing but Standard Temperature and Pressure. The standard temperature is 273K the standard pressure is 1 atm pressure.

We know, the ideal gas equation is represented as PV = nRT

where, P ---> pressure

V --> Volume of gas

R--> gas constant

T --> temperature

n --> number of moles of gas

First, we determine the number of moles:

so, n = PV/RT

plugging all known values in above formula to determine the value of n,

=> n = (1 atm × 0.280 L) /( R × 273 K)

Also, Value of gas constant, R = 0.0821 atm L/K/mol

=> n= (1 atm × 0.280 L) /(0.0821 atm L/K/mol × 273 K)

=> n = 0.0124 mol

Molar mass of substance, M = mass of substance/number of moles

Thus, molar mass of gas = 0.400g/0.0124mol

Hence, the molar mass of gas is 32.2580 g/mol.

To learn more about molar mass, refer:

https://brainly.com/question/837939

#SPJ4

The strongest base among the ones listed is NaOH.The conjugate acid NH3 is the least powerful in the group.

which is the H2N-conjugate acid.. H2N- will therefore be the most powerful basis. The existence of a lone pair of electrons on the nitrogen atom, which are available for the bond formation with Lewis acid, is what gives amine its basic nature. due to the +I action of the CH 3 NH 2 group.

Strong Bases List (8):

LiOH (lithium hydroxide) (lithium hydroxide)

NaOH (sodium hydroxide) (sodium hydroxide)

KOH (potassium hydroxide) (potassium hydroxide)

Ca(OH)2 (calcium hydroxide) (calcium hydroxide)

RbOH (rubidium hydroxide) (rubidium hydroxide)

Sr(OH)2 (strontium hydroxide) (strontium hydroxide)

CsOH (cesium hydroxide) (cesium hydroxide)

Ba(OH)2 (barium hydroxide) (barium hydroxide)

Learn more about NaOH Here :

https://brainly.com/question/29854404

# SPJ4

It is possible that there was an error in the measurement process that caused the recorded temperature to be higher than the actual temperature. This could be due to a number of factors such as incorrect usage of the thermometer, failure to properly calibrate the thermometer or interference from external sources during the measurement.

Additionally, it could be that the atmospheric pressure at the time of the experiment was different from 1 atm, which would affect the boiling point of the water. In order to determine the source of the error, the student should repeat the experiment and carefully examine their methodology to identify and correct any errors.

Learn more about Errors here: https://brainly.com/question/19575648

#SPJ4

In dimethyl sulfoxide (DMSO) solution, the relative nucleophilicity of halide ions can be ranked as follows:

Iodide (I-)

Bromide (Br-)

Chloride (Cl-)

Fluoride (F-)

This ranking is based on the fact that, in general, nucleophilicity increases as the basicity of the species increases. In DMSO, iodide is the most basic halide ion and has the highest nucleophilicity, followed by bromide, chloride, and fluoride in that order. Fluoride is the least nucleophilic due to its small size and high electronegativity, which make it less likely to participate in nucleophilic reactions. Nucleophilicity is a measure of the tendency of a nucleophile (an electron-rich species) to participate in a chemical reaction. It is a measure of the reactivity of a nucleophile towards an electrophile (an electron-poor species). A highly nucleophilic species has a high affinity for electrons and is therefore more likely to react with an electrophile.

Learn more about nucleophilicity:

brainly.com/question/29563504

#SPJ4