1. The Tuskegee Airmen were the first African American military aviators in the United States armed forces.
2. During their years of operation, 1940 to 1946, 996 pilots were trained at Tuskegee Army Air Field.
3. C. Alfred “Chief” Anderson is one of the most famous of the pilots in the Tuskegee Airmen story.
4. Red Tails because bomber crews often requested to be escorted by these “Red Tails,” a nicknamed acquired from the painted tails of Tuskegee fighter planes, which were a distinctive deep red.
5. The Tuskegee Airmen flew hundreds of patrol and attack missions for the Twelfth Air Force, flying P-40 and P-39 airplanes, before they were reassigned to the 15th Air Force to escort B-17 and B-24 heavy bombers, using P-47 and P-51 airplanes.
6. "Spit Fire"
7. The Tuskegee Airmen proved they were as good as any other group of pilots during World War II. They flew more than 1,800 missions. This included 351 missions to protect bombers in the sky.
8. 112 enemy airplanes
9. Among their accomplishments 111 German airplanes destroyed in the air and another 150 on the ground;
10. The Tuskegee Airmen were deactivated in 1946, the experiment a great success. But more than that. The brave fliers had proved themselves in combat, and their performance helped pave the way for desegregation of the military in 1948.
Hope this helped. :)
All answers are mentioned below.
Give a brief note on World War II?The war resulted in the death of an estimated 50 million people, making it one of the deadliest conflicts in human history. The primary cause of the war was the aggressive foreign policies of Nazi Germany, led by dictator Adolf Hitler, and the military and economic expansion of the Empire of Japan. The war ultimately led to the defeat of the Axis powers and the formation of the United Nations. The aftermath of World War II also included the beginning of the Cold War, the formation of the United States as a superpower, and the beginning of decolonization and the independence movements of African and Asian countries.
The Tuskegee Airmen were the first African American military aviators in the United States Army Air Corps (AAC), a precursor of the US Air Force.
They got their start in Tuskegee, Alabama, in 1941.
Their most famous passenger was First Lady Eleanor Roosevelt.
Their nickname was "Red Tails" because of the distinctive red markings on the tails of their aircraft.
The Tuskegee Airmen flew two famous planes: the P-47 Thunderbolt and the P-51 Mustang.
Their motto was "Never Lost a Bomber."
The Tuskegee Airmen flew over 15,000 combat missions during World War II, and shot down three enemy aircraft in air-to-air combat.
They also destroyed numerous enemy aircraft on the ground.
After World War II, the Tuskegee Airmen continued to serve their country and broke barriers for African Americans in the military and in society. They are now recognized as pioneers and heroes who paved the way for integration in the military and beyond.
To know more about aviators visit:
https://brainly.com/question/24911064
#SPJ1
Tegan is creating a 3D model of a tunnel. He has created the profile of the tunnel by extruding the vertices to create a thin rectangular shape. All he needs to do now is use the spin tool to rotate the shape around the axis and create the tunnel. What should he set the Angle to when enabling the spin tool so that it creates the tunnel resting on the ground and not a circular pipe? 3D modeling 10 grade
A.
90 degrees
B.
180 degrees
C.
270 degrees
D.
360 degrees
Answer:
Tegan wants to create a tunnel that rests on the ground, he should set the angle to 360 degrees when enabling the spin tool. This will cause the shape to be rotated around the axis in a full circle, creating a tunnel shape that sits flat on the ground. A 360-degree rotation will create a full revolution around the axis and will
Career Success: Job Applications
Success: Job Applications
Carla is going to businesses to ask for job applications in person. How does the presentation suggest she dress?
Normally
FormallyCasually
Professionally
Employers require all candidates for a position to submit a job application, which is an official form.
What is Job applications?Either go to the possible employer's website or a third-party job listing site to complete the application. You might be required to submit a paper application by some employers.
Employers utilize job applications because they offer a uniform structure with the same questions that each applicant for an open position must respond to. Employers can quickly compare each applicant's background and professional experience.
The names and contact information of references and employers, particularly direct supervisors, may also be requested on job applications.
Therefore, Employers require all candidates for a position to submit a job application, which is an official form.
To learn more about Employers, refer to the link:
https://brainly.com/question/14605883
#SPJ1
Sam has a toy truck that he wants to roll on three different surface areas; carpet, wood, and brick. In two sentences, predict which surface area the toy truck will move the fastest on and why.
wood - assuming a flat surface.
The carpet will "grab" the car due friction. A piece of wood will be a smoother surface than a brick, so less friction..
Can you help me answer these questions about Colonel Bluford?
He was an engineer a _______
and a USAF ______ and a _____
astronaut.
What college did he graduate from and with what degree?
He was inducted into the _____ ___ ____ __ ____ in 1997, and inducted into the ______ _______ ______
Hall of Fame in 2010.
The answer relating to Colonel Bluford are as follows:
1) He was an engineer a mechanical engineer and a USAF lieutenant colonel and a NASA astronaut.
2) He graduated from Pennsylvania State University with a Bachelor of Science degree in Aerospace Engineering.
3) He was inducted into the International Space Hall of Fame in 1997, and inducted into the U.S. Astronaut Hall of Fame in 2010.
What was Colonel Bluford famous for?
Colonel Guion S. Bluford Jr. was a famous astronaut who made history as the first African American to travel to space.
He was a mechanical engineer, a U.S. Air Force lieutenant colonel, and a NASA astronaut who flew on four Space Shuttle missions. Bluford's contributions to the field of space exploration have been recognized with numerous awards and inductions into hall of fames.
Learn more about Bluford:
https://brainly.com/question/14120449
#SPJ1
Read and analyze the following statements given. Tell if the statement is true. If not, change the underlined word(s) to make it true.
_____________ 1. A wedge is a modified inclined plane.
_____________ 2. A single wedge comprises only one inclined plane.
_____________ 3. An axe is a wedge composed of a single inclined plane.
_____________ 4. The narrower the wedge is, the sharper it gets.
_____________ 5. More effort is applied to a sharp wedge to split an object.
_____________ 6. A wedge changes the direction of the force that is applied to it.
_____________ 7. A door stopper is a wedge used to cut an object.
_____________ 8. A wedge can also hold an object in its place.
_____________ 9. A wedge with a shorter and wider tip requires less effort to do its work.
_____________ 10. A double wedge is composed of two inclined planes put side-to-side to form a sharp edge.
Answer:
1. True
2. False. A single wedge consists of two inclined planes joined together.
3. False. An axe is a double wedge, consisting of two inclined planes joined together to form a sharp edge.
4. False. The wider the wedge is, the sharper it gets.
5. False. Less effort is required to split an object with a sharp wedge.
6. True
7. False. A door stopper is a wedge used to hold a door in place, not to cut an object.
8. True
9. False. A wedge with a longer and narrower tip requires less effort to do its work.
10. True
Explanation:
2000 W with si prefix
In the SI prefix, the value of 2000 W is also written as 2 kW. This is because 1 kW = 1000 W.
What is meant by the SI prefix?SI prefixes may be defined as a collection or sequence of prefixes to units in the International System of Units, or SI. These can denote very small or very large amounts.
These types of prefixes are most commonly utilized in computing to refer to storage space, such as bytes, even though storage is not an official SI unit.
The designations of multiples and subdivision of any unit may be arrived at by combining with the name of the unit the prefixes deka, hecto, and kilo meaning, respectively, 10, 100, and 1000, and deci, centi, and milli, meaning, respectively, one-tenth, one-hundredth, and one-thousandth.
Therefore, in the SI prefix, the value of 2000 W is also written as 2 kW. This is because 1 kW = 1000 W.
To learn more about SI prefixes, refer to the link:
https://brainly.com/question/5039720
#SPJ1