Monochromatic light is incident on two slits separated by 0,2 mm. An interference pattern is observed on a screen 3,7 m away. The distance between the 3rd dark fringe and the central antinode is 0,048 What is the wavelength of the light? Write your answer in sicentific notation or in decimal form

Answers

Answer 1

Answer:

λ = 864 nm

Explanation:

To find the wavelength of the light you use the following formula, which determines the position of the m-th fringe in an interference pattern:

[tex]y_m=\frac{m\lambda D}{d}[/tex]   (1)

ym: position of a bright fringe

D: distance from the slits to the screen = 3,7 m

d: distance between slits = 0,2mm = 0,2 *10^-3 m

m: order of the fringe

λ: wavelength of the light

You have the distance from the central peak to the third fringe (0,048m). Then, you can use the equation (1) with m=3 and solve for the wavelength:

[tex]y_3=\frac{3\lambda D}{d}\\\\\lambda=\frac{dy_3}{3D}=\frac{(0,2*10^{-3}m)(0,048m)}{3(3,7m)}=8,64*10^{-7}m\\\\\lambda=864*10^{-9}m=864nm[/tex]

henc, the wavelength of the light is 864nm


Related Questions

2 A sailboat on a lake sails 40. meters north and
then sails 40. meters due east. Compared to its
starting position, the new position of the sailboat
is
(1) 40. m due east (3) 57 m northeast
(2) 40. m due north (4) 80. m northeast

Answers

Answer: 3

57m north east

Explanation:

Given that the boat sails 40. meters north and then sails 40. meters due east. The new position will be known by using pythagorean theorem.

P^2 = 40^2 + 40^2

P^2 = 1600 + 1600

P^2 = 3200

P = square root (3200)

P = 56.6 m

P = 57 m (approximately )

Therefore, the new position of the sail boat will be 57 north east

Compared to its starting position, the new position of the sailboat is 57 m northeast

The given parameters;

initial displacement of the sail boat, x₁ = 40 m north

final displacement of the sail boat, x₂ = 40 m east

The new position of the sail boat when compared with the starting position is the total displacement of the sail boat.

A sketch of the sail boat displacement;

                                           ↑ →  →  →  →  →  → 40 m

                                           ↑

                                           ↑40 m

                                           ↑

The hypotenuse of this right triangle is the total displacement of the sail boat.

[tex]R^2 = 40^2 + 40^2 \\\\R^2 = 3200\\\\R= \sqrt{3200} \\\\R = 56.57 \approx 57\ m[/tex]

The direction of the sail boat is northeast

Thus, compared to its starting position, the new position of the sailboat is 57 m northeast

Learn more here: https://brainly.com/question/13309193


Adding a best-fit line to the scatter plot shown below would be an example of _____.

A. making an inference
B. drawing a conclusion
C. checking a prediction
D. correcting a hypothesis

Answers

I think It would be C. Checking a prediction. Sorry if I’m wrong
brainliest plz!!!ANSWER IS "A""100% Sure" ~ sincerely,                    Amiya/Miya/Mya

please help me and i’ll give you brainliest if correct :)

Answers

Answer:

Accurate Measurements

Explanation:

Always put in accurate measurements when arguing

Answer:

accurately measurements

Temperature is a measure of

Answers

Answer:

degree celsius

Explanation:

it's measured in degree Celsius

Determine the ratio of the resistivity of pure water to silver?

3 x 10 11.1

1:3

1:3 x 10 11.1

Answers

Answer:

[tex]3 \cdot 10^{11} : 1[/tex]

Explanation:

Silver is a generally excellent conductor, this implies its resistivity is low (from table, we can check the exact worth i.e [tex]\rho_s = 1.6 \cdot 10^{-8} \Omega m[/tex])

Pure water, rather, is an extremely awful conductor, this implies its resistivity is exceptionally high, of order of [tex]k \Omega \cdot m (10^3 \Omega m )[/tex]

Indeed, even without knowing the exact estimation of the pure water resistivity, we can appraise the proportion between the pure water resistivity and the silver resistivity by looking at the two orders of magnitude:

[tex]r= \frac{10^3 \Omega m}{10^{-8} \Omega m} \sim 10^{11}[/tex]

Therefore, we can say that the correct answer is

[tex]3 \cdot 10^{11} : 1[/tex]

Please help! Will give brainliest! It’s My last.

Answers

Answer:

c is correct option because moon will go away when we come closer to earth and it will cut in round shape...

please mark me BRAINLIEST

Answer:

C.

Explanation:

Because when we closer, it is rounder

You have a nightlight plugged into an outlet in the hallway, which uses 3.5 watts when plugged in. If the house circuit provides 120.0 volts, wh

is the current through this bulb?

A. 420 amps

B.

0.029 amps

C.

34 amps

D.

0.0083 amps

Answers

Answer:

I = 0.029 A

Explanation:

It is given that,

Power of hallway is 3.5 watts

The  house circuit provides 120 volts

We need to find the current through this bulb. The power of electric bulb is given by :

[tex]P=VI[/tex]

[tex]I=\dfrac{P}{V}\\\\I=\dfrac{3.5}{120}\\\\I=0.029\ A[/tex]

So, the electric current is 0.029 A.

Answer:

I = 0.029 A

Explanation:

Which statement is true about the ideal mechanical advantage of a third-class lever?
A It is always greater than 1.
B It is always equal to 1.
C It is always less than 1.
D It can be less than, greater than or equal to 1.​

Answers

WhT exactly is this for can you give more information

Answer:

It is always less than one.

Explanation:

Because the load covers more distance than the force when they move in the same direction.

[tex]<marquee>♥️Mark as brainliest♥️</marquee>[/tex]

Which energy conversion correctly describes what happens when you are dancing

Answers

Kinetic because u are moving around a lot!

what is an example of a compressional wave?

Answers

Answer:

The wave front expanding out from an explosion is possibly the most dynamic example of a compressional wave. And a pulse of compressed air can transfer a LOT of energy. ... For a literal "compression wave" visualize accelerating a boat across the water, compressing the water it encounters into a "bow wave".

Sound is an illustration of a compressional wave. Mechanical waves like sound waves need a medium to travel through, such air, water, or solids.

A sound wave undergoes compressions and rarefactions as it passes through a medium.

Particles in the medium move parallel to the wave's propagation direction during a compressional wave.

When particles are close to one another, compression regions arise in the case of sound waves, creating high-pressure zones.

Following these compressed zones are rarefactions, when the particles are dispersed and low-pressure areas develop.

Thus, sound is an example of a compressional wave.

For more details regarding compressional wave, visit:

https://brainly.com/question/13695946

#SPJ6

A bird sitting on a hinged perch takes off from the perch, pushing the perch
in the opposite direction. The momentum of the perch

Answers

Answer:

The momentum of the perch is equal to it's own momentum gather to take off

Explanation:

According to the Newton third law of motion which state that: in every action, there will be an equal and opposite reaction.

This is the law that helps us to walk, paddle boats e.t.c.

And momentum is always conserved. Therefore, the momentum of the perch is equal to it's own momentum gather to take off

Plz ans this fast
Ur ans will be maked as brainliest
u'll get pts too

Plz solve this asap.....

Answers

Answer:

1) b,

2)a,

3)3seconds

4)10&30

5)0

Explanation:

Look at the figure below and calculate the length of side x.
A. 12.6
B. 14.5
12
C. 10.3
u
у
O D. 8.5
45

Answers

Answer:

8. 484 so 8.5cm is the answer

Explanation:

Trig ratio.. I used cosine here

Cos 45= x /12

X = 12 x cos 45

= 12 x 0.707

= 8.484

=8.5

Mirrors produce images by doing which of the following to light?
A. Refraction
B. Diffraction
C. Reflection
D. Interference
E. Scattering

Answers

Answer: C

Reflection

Explanation: Light travels in a straight line. Reflection is one of the properties of light. And this is the property in which mirror make use of. The ability of light to bounce back. It's this bouncing back characteristics of light ray that eventually produce the image of an object by the mirror.

If the light ray is absorbed, no image will be produced.

a. Write 2-3 sentences describing what happens to a uranium nucleus during nuclear
fission. (2 points)

b. Write 2-3 sentences explaining why nuclear fusion cannot be used in power plants, yet
can still be the original source of the electric energy used in homes. (4 points)

c. Write 3 - 4 sentences evaluating the use of nuclear fission to generate electric energy. Provide at least one point in favor of and two points against using fission. (3 points)

Answers

Answer:

Through their studies of radioactive elements, they discovered nuclear fission.

The atoms then undergo nuclear fission, producing daughter nuclei and more neutrons.

Critical mass is the minimum mass of fissionable material required to sustain a nuclear fission reaction.

Imagine an energy source that is more powerful than nuclear fission or even nuclear fusion.

The products of uranium mining and nuclear fission remain radioactive for hundreds of thousands of years.

Health officials did not test for Strontium 90, a radioactive carcinogenic byproduct of nuclear fission.

And no one's going to be able to invent all the hydrogen-powered cars and nuclear fission energy we're supposed to have in the future.

The development of nuclear fission weapons and later thermonuclear fusion weapons represented an incomparable revolution in weaponry.

The element can be prepared artificially in particle accelerators and is a byproduct of nuclear fission reactions.

Nuclear fusion reactions are like nuclear fission reactions, therefore, in the respect that some quantity of mass is transformed into energy.

Before World War II, German chemists Otto Hahn and Fritz Strassmann discovered nuclear fission.

Element 109 is named meitnerium, for Lise Meitner, who was the first to realize that uranium undergoes nuclear fission.

The reason is that nuclear fission occurs best with neutrons that move at relatively modest speeds, called thermal neutrons  

The simple atom bomb owed its explosive power to the energy released by nuclear fission, or fusion.

An atomic bomb is a weapon of mass destruction which uses nuclear fission to produce vast amounts of energy.

These engines use the heat of nuclear fission to drive steam turbines, which in turn charge the batteries.  

Pellets of nuclear fuel are contained within the fuel rods of nuclear fission reactors.

It is likely that nuclear fission, hydroelectricity, wind power and direct solar power will be important sources for future electricity generation.  

Their research provided the groundwork for other modern-day solutions that use microwave energy and light to propel ships, rather than nuclear fission.

Why is the public too dumb to understand the Privy Council, too unscientific to understand genetic engineering, but is now an expert on nuclear fission? btw this is for c

Answer:

A.When a large, fissile atomic nucleus such as uranium-235 absorbs a neutron, it may undergo nuclear fission.In the first step, a uranium-235 atom absorbs a neutron, and splits into two new atoms, releasing three new neutrons and a large amount of binding energy.

B. One of the biggest reasons why we haven't been able to harness power from fusion is that its energy requirements are unbelievably, terribly high. In order for fusion to occur, you need a temperature of at least 100,000,000 degrees Celsius. That's slightly more than 6 times the temperature of the Sun's core.

C. You would need less uranium to fuel it and it would generate better electricity, but its energy requirements are too high, and we would not be able to control it

Explanation:

cynthia sprints 60 meters in 5 seconds during soccer practice. what is her speed. please show your work

Answers

Answer:

12 m/s

Explanation:

Speed can be found using the following formula.

[tex]s = \frac{d}{t}[/tex]

where s is speed, d is distance traveled and t is the time.

We know that Cynthia sprinted 60 meters in 5 seconds. Therefore, the distance is 60 meters and the time is 5 seconds.

d=60

t=5

Substitute these values into the formula.

[tex]s=\frac{60}{5}[/tex]

Divide

[tex]s=12[/tex]

Add appropriate units. For this problem, the appropriate units would be meters per second, or m/s.

[tex]s=12 m/s[/tex]

Cynthia's speed is 12 meters per second.

What are physical properties?

Answers

Answer:

they are things that can't be turned back the way they were before, like when you mix an egg, you can't get the egg to unmix itself.

Explanation:

a charged particle is 2×10^-4C determine the quantum number of the charge​

Answers

Answer:

wedf

Explanation:

If a car is traveling at the speed of light and the car turns on the headlight, what would happen? Would the headlight not turn on at all, would the headlight travel at twice the speed of light, or would the headlight act like a flowing sink flowing out light?

Answers

Answer:

flowing sink flowing out light

Explanation:

What is the difference between a mixture and a pure substance? Give an example of each.

Answers

Answer:

A pure substance (an element or a compound) is made up of only one type of atom, or molecule.

Examples: water (H2O molecules), oxygen (O2 molecules), argon (Ar atoms).

A mixture is made of up of more than one type of atom or molecule.

Examples: salt water (H2O molecules, Na+ ions, Cl- ions),

air (N2 molecules, O2 molecules, Ar atoms, CO2 molecules)

Note: the composition of a pure substance is fixed, but the composition of a mixture can vary. Two salt water solutions might not have the same concentration of salt. Or, if you prefer, one blueberry muffin might have more blueberries in it than another blueberry muffin.

make me brainlist if u think its helpful

6. To which of these abrasive disks can you
apply a water-coolant?
(A) Concrete
(B) Metal

Answers

Answer: its B

Explanation:

Metal abrasive disks are used as a water coolant. These are used mostly to slice stones and metals. Grit discs have several advantages over various kinds of discs. They have such a relatively fast cutting speed. The grit disc sander is not a hefty instrument that can be easily held when operating on a scaffold.

Steel cutting fluids are abrasive or peening mediums composed of iron particles. They are typically offered in two sizes (shot and grit) that suit various industrial applications. Since these grains are made from smashed steel shot, they have sharp edges and broken parts.

Therefore, the answer is "Option B".

Learn more:

brainly.com/question/10647666

Which describes how chemical changes are different from physical changes?
Select one: a. Chemical changes can be measured, but physical changes cannot. b. Chemical changes involve the formation of a new substance. c. Chemical changes release energy, but physical changes absorb energy. d. Chemical changes cannot be caused by oxygen.

Answers

Answer:

B. Chemical changes involve the formation of a new substance.

Explanation:

They can both release energy, both can be measured, and chemical changes can be caused by oxygen, so I believe it would be B.

Which of these does not have an electric charge?

neutron

proton

electron

atom

Answers

Neutron they show me a way to find it
P-positive
E-negative
N-no charge

Answer:

i think its the first one...you could have searched it up though.

Explanation:

Along with X-Rays, which high frequency EM waves can be used to destroy
cancer cells? *
Radio
Microwave
Infrared
Gamma

Answers

I believe it’s gamma

Which example shows separation of different wavelengths of light due to diffraction?​

Answers

Answer:

spectrum

Explanation:

The spectrum formed different colors due to refraction of light

Answer:

A A A A A

Explanation:

correct on edge:)

Scientists can use rock layers to determine which of the following? Group of answer choices The mass of Earth The size of Earth The age of Earth The amount of land on Earth

Answers

Answer:

The age of the earth

Explanation:

The deeper the layer the older the age

Give me one example of a sport that requires someone to have good reaction time?

Answers

Answer:

Baseball

Explanation:

Baseball because the ball can come at you at high speeds and you need to react quickly.

Are these dimensional analysis answers correct?

Answers

Answer:

yes

Explanation:

because once you learn you get to know more answers that's why you should come to brainly.

HELP PLZZZZZ Consider the following data:
Current (A)
Resistance (Ω)
0.9
10
0.18
50
0.09
100
Which relationship is shown in this data?



As you increase the current, the resistance increases.

As you increase the resistance, the current decreases.

As you decrease the resistance, the current decreases.

There is no relationship between current and resistance.

Answers

Answer:

I think the answer is As you increase the current the resistance increases too.

It’s A I’m sorry if it’s wrong

3. If substance A has half the index of refraction of substance B, which is (most likely) more dense

Answers

Answer:

The correct answer is A!

Explanation:

Other Questions
what is the first srep in evalidating in espresion below what is the drag force acting on a car with a resultant force of 600N when the engine is pushing it with a force of 11,000N "Dean wants a quick way to look up staff members by their Staff ID. In cell Q3, nest the existing VLOOKUP function in an IFERROR function. If the VLOOKUP function returns an error result, the text ""Invalid Staff ID"" should be displayed by the formula. (Hint: You can test that this formula is working by changing the value in cell Q2 to 0, but remember to set the value of cell Q2 back to 1036 when the testing is complete.)" f(r) = 3.14r2 . What is f(3)? A flat object with two sides, one colored red (R), the other green (G), is tossed 2 times. List all possible outcomes of the experiment. What is the special name for the perimeter of a circle combine like terms .Plez Halp TnTA. 7a + 70 - 13 a - 1 lbB. -5a - 12a + 2b - 3b Using the digits 0 to 9 at most one time each, fill in the boxes to generate equivalent numerical expression. please help me, i don't really understand it... Pls help me if you help me and its right Ill give you 100 points Which position of the pendulum would have the least amount of potential energy. What health resources are available in your community? List at least three. Find the volume of the composite solid. Please explain how you got your answer Which expression represents the volume of this solid ? what does the pythagorean theorem and its Converse state? why is this theorem important? what are some real world examples in which this theorem is used? STATE IF THE TRIANGLE IS A RIGHT TRIANGLE(PLZ SHOW WORK I NEED HELP)I WILL MARK BRAINLIEST Analyze the diagram below and complete the instructions that follow. A triangle has these coordinates Point A:(1,5)Point B:(1,9)Point C:(8,5)Enter the length of side AC calculo la superficie de las figuras sabiendo que cada cuadrado mide 5m2 Determine the slope of the line that passes through the points: x8,0,4,5,y,33,1,15,19