methyl acetate has a chemical composition of 48.64% carbon, 8.16% hydrogen, and 43.20% oxygen. what is the empirical formula?

Answer:

Although air is made up of particles too small to be seen, they still contain mass. These particles are made up of molecules which contain atoms that interact with each other and have a certain amount of mass, as well as kinetic energy. The mass of the gases in air can also be determined by measuring the gravitational pull they exert on objects in the atmosphere.

The balanced equation for the reaction of ammonia and oxygen using the smallest whole-number coefficients is given below:

4 NH₃ (g) + 3 O₂ (g) --->  2 N₂(g) + 6 H₂O (g) + energy

Ammonia, NH₃ (g), can be used as a substitute for fossil fuels in some internal combustion engines.

The reaction between ammonia and oxygen in an engine is represented by the unbalanced equation below.

NH₃ (g) + O₂ (g) --->  N₂(g) + H₂O (g) + energy

Balancing the equation for the reaction of ammonia and oxygen involves using the smallest whole-number coefficients placed before the reactants and products.

Learn more about balanced equations at: https://brainly.com/question/26694427

#SPJ1

The type and number of electrons transferred between the two elements depend on the location of each element in the periodic table. Generally, metals lose electrons to form cations, while nonmetals gain electrons to form anions.

Electrons are tiny particles that carry a negative charge and orbit the nucleus of an atom. They are the building blocks of matter, and their properties are the basis for understanding the behavior of all matter. Electrons are the smallest known particles, and have a mass that is approximately 1/1836th of a proton. Electrons are part of the electromagnetic force and are responsible for electrical, chemical, and optical behavior. Electrons can move from one atom to another, and this is what allows them to form bonds and create molecules. Electrons also form a cloud of negative charge around the nucleus of an atom, helping to keep the atom stable and together. The electrons of an atom can also interact with other atoms and particles, and this is what allows them to form compounds and materials.

To learn more about electrons

https://brainly.com/question/26084288

#SPJ4

Answer:

Tonicity depends only on the concentration of nonpenetrating solutes, so any solution of pure glucose will be hypotonic, no matter what its osmolarity, and tonicity describes only the change in cell volume at equilibrium.

A solution can be described as hyperosmotic if it has a higher concentration of solute particles compared to another solution, while a solution is described as hypotonic if it has a lower concentration of solute particles compared to another solution.

It may seem contradictory to say that a solution can be both hyperosmotic and hypotonic, but it is possible in certain situations.

One example is when comparing a solution with a higher concentration of non-permeating solutes to a solution with a lower concentration of non-permeating solutes. Non-permeating solutes are solutes that cannot pass through the cell membrane, and therefore do not affect the concentration of solutes inside the cell.

If a solution with a higher concentration of non-permeating solutes is placed next to a solution with a lower concentration of non-permeating solutes, the first solution is hyperosmotic, but if the cell is placed in the higher concentration solution, it is hypotonic to the cell.

This is because water molecules will move from the hypotonic solution (the one with lower concentration of solutes) to the hyperosmotic solution (the one with higher concentration of solutes), causing the cell to swell and potentially burst.

Know more about "hyperosmotic":-

https://brainly.com/question/13895898#

#SPJ11

The effect of radiation that occurs when ionizing radiation interacts directly with a radiosensitive molecule is called direct effect.

The radiolysis of water is an instance of an instantaneous impact of radiation publicity in humans. In the direct action, the radiation hits the DNA molecule directly, disrupting the molecular shape. Such structural alternate ends in cell harm or maybe cellular death. Damaged cells that live to tell the tale can also additionally later set off carcinogenesis or different abnormalities. A long-time period somatic impact is the harm to cells which can be always reproducing. These cells are the maximum touchy to radiation due to the fact any modifications made withinside the discern cell's chromosome shape can be transmitted to its daughters.

To learn more about chromosomes check the link below:

https://brainly.com/question/11912112

#SPJ4

200.7 g/mol is molecular mass when 0.300 g of an unknown were dissolved in 9.95 g of cyclohexane, a freezing point of depression of 7.51c was measured.

The molecular mass of the unknown solute can be calculated using the relationship between the freezing point depression (ΔTf), the molality of the solution (m), and the freezing point depression constant (Kf) of the solvent. The equation is given as ΔTf = Kf * m, where m is the molality of the solution.

The molality of the solution can be calculated as the number of moles of solute divided by the mass of solvent. The number of moles of solute can be calculated as the mass of the unknown solute divided by its molecular mass.

The mass of the unknown solute is given as 0.300 g and the mass of the solvent is 9.95 g. The freezing point depression constant for cyclohexane is known to be 5.04 °C·kg/mol. Substituting these values into the equation, we get:

7.51 °C = 5.04 °C·kg/mol * m

Solving for m, we get:

m = 7.51 °C / 5.04 °C·kg/mol = 1.49 × 10^-3 mol/kg

Finally, the molecular mass of the unknown solute can be calculated as:

molecular mass = (0.300 g) / (1.49 × 10^-3 mol/kg) = 200.7 g/mol.

Learn more about cyclohexane here:

https://brainly.com/question/17019157

#SPJ4

352 grams of glucose are required to form 180 g of ethanol.

This is an example of a decomposition reaction. In a decomposition reaction, a single compound breaks down to form two or more new compounds or elements. It requires an energy source such as heat, light or electricity.

Molecular mass of Glucose = 180 g

Molecular mass of ethanol = 46 g

Thus 2 × 46 g = 92 g of ethanol is formed, from 180 g of glucose.

92 gm of ethanol is formed from 180 grams of glucose.

1 gm can be formed using = 180/92 grams of glucose

Now 180 gram of ethanol would require, 352 grams of glucose.

To know more about the decomposition reaction, here

brainly.com/question/16987748

#SPJ4

The conversion factors to the conversions that they would be used for as follows:

1.moles/grams ⇒ d. mass to mole

2.grams/moles ⇒ a. mole to mass

3.atoms/grams ⇒ e. mass to atom

4.moles/atoms ⇒ c. atoms to mole

5.atoms/moles ⇒ b. moles to atoms

The term mole is defined as the amount of substance of a system which contains as many elementary entities.

One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.

The mole concept can be used to convert between mass and number of particles.

Thus, The conversion factors to the conversions that they would be used for moles/grams ⇒ mass to mole.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

The work associated with the expansion of a gas from 42.0 l to 79.0 l at a constant pressure of 14.0 atm is 518.0 atm-l

Work in chemistry is the energy or force required to perform a chemical reaction or to move an object from one place to another. Work in chemistry is most often associated with physical transformations such as changes in pressure, temperature, or volume. Chemical reactions also require work, such as when a reactant is converted into a product. Work is an important concept in thermodynamics, which is the study of energy and its transformation from one form to another. In thermodynamics, work is measured in joules or calories, which are units of energy. Work is also used to describe the energy needed to break or form chemical bonds, which is the basis of many chemical reactions.

Work = (Pressure)(Change in Volume)

Work = (14.0 atm)(79.0 l - 42.0 l)

Work = (14.0 atm)(37.0 l)

Work = 518.0 atm-l .

The work associated with the expansion of a gas from 42.0 l to 79.0 l at a constant pressure of 14.0 atm is 518.0 atm-l. This is because a pressure-volume expansion requires work, which we can calculate using the formula Work = (Pressure)(Change in Volume). In this case, we multiply the pressure by the change in volume to get the work.

To learn more about Work

https://brainly.com/question/26487364

#SPJ4

The forms of energy are as follows:

Energy, in physics, refers to the capacity for doing work.

Energy exists in many different forms. Examples of these forms are:

Each form of energy can be converted or changed into the other forms.

Learn more about energy at: https://brainly.com/question/1932868

#SPJ1

The minimum amount of such material that should be shipped in order that 1.0 mg of 55cr is delivered to the laboratory is 70.71 mg.

Half life of any atom is defined as the total time required for half of the original population of radioactive atoms to decay.

Half life = 2.0 hours

By the formula of half-life,

Half life = 0.693/k

Where,

k is rate constant

k = 0.693/2.0

k = 0.3465 hr⁻¹

Formula to find initial concentration is given as,

ln A/A° = -kt

Where,

A is final concentration

A° is initial concentration

t is time

Taking exponential on both sides we get,

A/A° = e^(-kt)

⇒A° = A/e^(-kt)

⇒A° = 70.71 mg

Hence, the minimum amount of such material that should be shipped in order that 1.0 mg of 55cr is delivered to the laboratory is 70.71 mg.

Learn more about half-life from the link given below.

https://brainly.com/question/24710827

#SPJ4

Answer: They are both chemical changes.

Explanation:

the mass of methanol is  22.2g  and 33.8g  [tex]H_2O[/tex]

The idea here is that you need to use the definition of mole fraction to find a relationship between the number of moles of methanol,

, and the number of moles of water.

mole fraction is defined as the ratio between the number of moles of a component i of a solution and the total number of moles present in that solution.

[tex]X_i=\frac{No\: of\: moles\: of\: i}{total \: no \: of \:moles}[/tex]

Now,  solution contains methanol, your solute, and water, your solvent. If you take x to be the number of moles of methanol and y to be the number of moles of water,

the mole fraction of methanol will be= [tex]X_{Ch_3oh}=\frac{x}{x+y} =0.270 \rightarrow(1)[/tex]

[tex]X_{Ch_3oh}=\frac{x\times32.042}{1} =32.042x[/tex]

the same for water

[tex]Y_{H_2O}=\frac{y\times18.015}{1} =18.015y[/tex]

You thus have

32.042x +18.015y=56    [tex]\rightarrow(2)[/tex]

now two equations with two unknowns. Use equation (1)

x=0.270 ×  (x +y)

0.730x=0.270y

x=[tex]\frac{0.270}{0.730}y[/tex]

Plug this into equation (2)

32.042 ([tex]\frac{0.270}{0.730}y[/tex] ) +18.015y=56

11.85y + 18.015y =56

y=[tex]\frac{56}{11.85+18.015}=1.875[/tex]  

This will give you

[tex]x=\frac{0.270}{0.730} \times1.875=0.6935[/tex]

Use the molar masses of the two species to convert the number of moles to grams

0.6935 × 32.0412 =22.2g [tex]Ch_3Oh[/tex]

1.875 × 18.015=33.8g  [tex]H_2O[/tex]

Learn more about methanol

brainly.com/question/24077457

#SPJ4

Answer:

I agree with the statement that gas particles do not respond to heat the same way people do. Gas particles do not feel the heat in the same way as people do because they are not conscious and do not have a nervous system that allows them to perceive temperature. Instead, the behavior of gas particles is governed by the laws of thermodynamics, which describe how temperature and energy are related to the movement of particles.

For example, when a gas is heated, the particles within it will gain kinetic energy and move more rapidly. This increased motion causes the gas to expand and, if confined, the pressure within the container will increase. This is because the particles are colliding more frequently and with greater force with the container walls. In contrast, when a person is exposed to heat, their body will respond by sweating, which cools the skin by evaporation. The person may also feel uncomfortable or experience other physiological responses to the heat.

Therefore, while both gas particles and people can be affected by heat, their responses are different due to the fundamental differences in their physical and biological properties.

S- is present at a concentration of 2 10(-13) M, whereas H+ is present at a concentration of 0.05 M.

The number of moles in relation to the substance's volume is known as the concentration.

H2S is entirely ionized in the solution, as we are all aware of.

the chemical formula H2S ——- 2(H+) + S2-

Concentration = volume / moles

It is discovered that the concentration of H+ ions and H2S are equivalent.

[H+] = [H2S] = 0.05M

Being aware of that

[H+] [OH-] = 10^(-14) (-14)

[OH-] = 10^(-14) / 0.05

[OH-] = 2 × 10^(-13) (-13)

The concentration of S- in is therefore 2 10(-13) M, while the concentration of H+ ion is 0.05M.

The complete question is,

Determine how much of each species there is in an H2S solution with a concentration of 0.05 m.

To learn more about concentration refer to:

brainly.com/question/18724033

#SPJ1

In the case of calcium fluoride, the unit cell shows one calcium ion and two fluoride ions, meaning the empirical formula is CaF2.

The empirical formula of a compound is the simplest whole number ratio of its constituent elements.

The empirical formula of a compound represents the simplest whole number ratio of atoms in a molecule. To find the empirical formula for calcium fluoride, we need to determine the ratio of calcium and fluoride ions in the crystalline lattice of fluorite. In the unit cell shown, there are equal numbers of calcium ions (darker spheres) and fluoride ions (lighter spheres). This means the ratio of calcium to fluoride is 1:1, which gives us the empirical formula of CaF2.

Learn more about empirical formula:

brainly.com/question/14044066

#SPJ4

The  2.0 ml pipet transfers the 0.10 M stock solution to the 25.0 ml volumetric flask which is then diluted. The molar concentration of the diluted copper solution is 0.008 M.

The initial molar concentration, M₁ = 0.10 M

The initial volume , V₁ = 2.0 mL

The final molar concentration, M₂ = ?

The final volume, V₂ = 25.0 mL

The expression is as follows :

M₁ V₁ = M₂ V₂

M₂ = M₁ V₁ /  V₂

M₂ = (0.10 × 2 ) / 25

M₂ = 0.008 M

Thus, the molar concentration of the diluted copper solution is 0.008 M.

To learn more about concentration here

https://brainly.com/question/20910830

#SPJ4

In this reaction, the theoretical yield of aluminum oxide is 77.27 g. The percent yield of aluminum oxide is 78.7%, which is calculated by dividing the actual yield (61.0 g) by the theoretical yield (77.27 g) and multiplying by 100.

The percent yield of a reaction is an important measure of its efficiency. It is calculated by dividing the actual yield of a product by the theoretical yield and multiplying by 100. A higher percent yield indicates that more of the desired product was produced in the reaction, and that the reaction was more efficient.

The percent yield of a reaction can be affected by several factors, such as the amount of reactants present, the temperature at which the reaction is conducted, and the presence of catalysts or other substances that can affect the rate of the reaction.

Learn more about percentage yield of aluminum oxide:

https://brainly.com/question/29081861

#SPJ4

When a seismic wave passes from the ground into a body of water the waves energy would be absorbed. The correct answer is Option A. Seismic waves move more slowly through a liquid than a solid.

Seismic waves are waves that travel below or over Earth. Explosions, volcanoes and landslides are the reason for the movements of the earth tectonic plates. Seismic waves can be identified by a number of characteristics including the speed the waves travel, the direction that the waves move particles as they pass by, where and where they don't propagate

Learn more about seismic wave here

https://brainly.com/question/26360015

#SPJ1

Same number of protons and different number of neutrons.

Oxygen is a chemical element with 8 protons. It is capable of achieving a noble gas electronic configuration by accepting two electrons. Oxygen is important for many living organisms.

Oxygen-16 and oxygen-18 differ in the number of neutrons in their nuclei. Oxygen-16 has 8 neutrons, while oxygen-18 has 10 neutrons. Oxygen-16 and oxygen-18 have the same number of protons and electrons. Both neutrons and protons have mass, so changing the number of neutrons changes the mass of oxygen. These elements with different numbers of neutrons are referred to as isotopes. Both oxygen-16 and oxygen-18 are stable isotopes of oxygen and are not radioactive.

To know more about the Oxygen, here

brainly.com/question/24259144

#SPJ4

Nitrous oxide is sometimes used as a source of oxygen gas. Therefore, the volume of N[tex]_2[/tex]O and O[tex]_2[/tex] are 2.22 L and  1.11L respectively.

Nitrous oxide (N2O), also known as dinitrogen monoxide, laughing gas, as well as nitrous, is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes insensibility to pain, followed by moderate hysteria and, occasionally, laughter.

In 1772, the English scientist Joseph Priestley discovered nitrous oxide; another English chemist, Humphry Davy, later identified it as well and demonstrated its physiological function. Nitrous oxide is mostly used as an anesthetic in short-term surgical procedures; prolonged inhalation results in bad.

2N[tex]_2[/tex]O(g)→2N[tex]_2[/tex]O(g)+O[tex]_2[/tex](g)

volume of N[tex]_2[/tex]O = 2.22 L

volume of N[tex]_2[/tex]O =2.22 L

volume of O[tex]_2[/tex] = 1.11L

Therefore, the volume of N[tex]_2[/tex]O and O[tex]_2[/tex] are 2.22 L and 1.11L respectively.

To learn more about nitrous oxide, here:

https://brainly.com/question/14931378

#SPJ1

The benefits of transmuting metals include having access to rare and valuable materials as well as reduced environmental impact.

Some losses from transmuting metals include the high cost and the safety concerns from radiation.

Transmuting metals involves the transformation of one metal into another by means of nuclear reactions. transmuting metals can provide access to rare and valuable metals that are in short supply, such as platinum and gold.

The process of transmuting metals can be expensive, especially if done on a large scale. The process of transmuting metals involves the use of nuclear reactions, which can pose a risk of radiation exposure.

Find out more on transmuting metals at https://brainly.com/question/11097938

#SPJ1

Answer:

What are the benefits of transmuting metals?

Although in the present state of science no chemist can say that lead and gold do not contain the same elements.

What can you gain from transmuting metals?

To the alchemists of old, this meant the conversion of one physical substance into another, particularly base metals such as lead into valuable silver and gold.

What can you lose by transmuting metals?

A transmutation entails a change in the structure of atomic nuclei and hence may be induced by a nuclear reaction (q.v.), such as neutron capture, or occur spontaneously by radioactive decay, such as alpha decay and beta decay (qq. v.).

it is limited by the costly and cumbersome need to separate long-lived fission product isotopes before they can undergo transmutation. also, some long-lived fission products, due to their small neutron capture cross sections, are unable to capture enough neutrons for effective transmutation to occur.

Have a wonderful day! :-)

#SPJ1

5.33 moles Liters of gas is 3.21 x 1024 molecules of carbon monoxide.

1 mole contains 6.02×[tex]10^{23}[/tex]

X×6.02×[tex]10^{23}[/tex] = 3.21×[tex]10^{24}[/tex]

X= 3.21×[tex]10^{24}[/tex]/6.02×[tex]10^{23}[/tex] = 0.533×10= 5.33 moles

A molecule is a collection of two or greater atoms held together by attractive forces called chemical bonds; relying on context, the term can also or might not consist of ions that fulfill this criterion.

A molecule may be homonuclear, this is, it includes atoms of one chemical element, e.g. atoms inside the oxygen molecule (O2); or it may be heteronuclear, a chemical compound composed of a couple of detail, e.g. water ( hydrogen atoms and one oxygen atom; H2O). within the kinetic theory of gases, the time period molecule is frequently used for any gaseous particle no matter its composition. This relaxes the requirement that a molecule includes extra atoms because the noble gases are character atoms.

To learn more about Molecules visit here:

brainly.com/question/19922822

#SPJ4

To calculate the number of molecules of lactic acid causing you pain in your leg muscles, you will need to use the molar mass of lactic acid (C3H6O3), which is 123 + 16 + 16*3 = 36 + 6 + 48 = 90 g/mol.

Then, divide the mass (5.0 g) by the molar mass of lactic acid to calculate the number of moles of lactic acid present: 5.0 g / 90 g/mol = 0.0556 moles.

Finally, multiply the number of moles by Avogadro's number (6.022 x 10^23) to calculate the number of molecules present: 0.0556 moles x (6.022 x 10^23 molecules/mole) = 3.33 x 10^22 molecules.

Learn more about lactic acid:

https://brainly.com/question/14279880

#SPJ4

The total mass of the solution is   0.100025 Kg. Hence, the concentration in parts per million is 246.93 ppm.

Parts per million or ppm is  a term used to express the concentration of a solution. The concentration of the a solution can be expressed in terms of the mass , volume or number of moles of the solute in the solution.

ppm of a solution = weight of solute in kg/weight of solution in kg ×10⁶.

Given , mass of solute lead nitrate = 0.025 g

mass of solvent = 100 g.

total mass of the solution = 100 + 0.025 = 100.025.g

mass in kg =   0.100025 Kg.

mass in kg of solute = 0.000025 Kg

ppm of solution  = 0.000025 kg/   0.100025 Kg ×10⁶. = 249.9 ppm.

Therefore, the concentration of the solution in ppm is 249.9 ppm.

Find more on ppm :

https://brainly.com/question/16727593

#SPJ1

The solution of sucrose would not conduct electricity, since sucrose is a non-ionic compound. The solutions of ammonia (NH3) and hydrochloric acid (HCl) would both conduct electricity, since ammonia and HCl are both ionic compounds.

When a substance is dissolved in water, it can form ions that can then conduct electricity. Ions are atoms or molecules that have an electric charge, and ionic compounds are those that contain both positively and negatively charged ions. Non-ionic compounds, such as sucrose, do not form ions when dissolved in water, and so they do not conduct electricity.

Learn more about non-electrical conductive solutions:

https://brainly.com/question/14301776

#SPJ4

The empirical formula of a compound is the simplest whole-number ratio of atoms in a molecule of the compound. the possible empirical formula for ch2 among given choices is c. C12H22.

The molecular formula, on the other hand, gives the actual number of atoms of each element in a molecule of the compound. The molecular formula can be a multiple of the empirical formula.

In this case, the empirical formula of the compound is CH2, which means it contains one carbon atom and two hydrogen atoms.

Therefore, the molecular formula of the compound could be C2H4, C4H8, or any other multiple of CH2, but it cannot be C7H14 or C12H22 because these molecular formulas are not multiples of CH2.

So, the correct answer is: c. C12H22.

Learn more about empirical formula here:

https://brainly.com/question/21280037

#SPJ4

The approximate mass of an atom can be determined by measuring the relative atomic mass (or atomic weight) of the element in question.

Atomic mass units (amu) are a unit of mass used to measure the mass of individual atoms. This is done by looking up the element in the periodic table, where the atomic weight is listed in the top right corner of each element's box. This number is typically given to one or two decimal places, and it represents the mass of an atom in amu.

The equation for calculating the approximate mass of an atom in atomic mass units is as follows:

Approximate Mass (amu) = Relative Atomic Mass (from periodic table)

learn more about Atomic mass units Refer:brainly.com/question/12149512

#SPJ4

The communication between neurons is accomplished using energy and the type of energy is electricity and chemicals.

Neurons communicate with each other in connections called synapses, a process called synaptic transmission. At a synapse, one neuron sends a message to another cell, the target neuron. Most synapses are chemical. These synapses communicate using chemical messengers. Other synapses are electrical. At these synapses, ions flow directly between cells. Neurons communicate with each other using electrical events called "action potentials" and chemical neurotransmitters. Neurotransmitters are chemical messengers that the body cannot function with. Their job is to send chemical signals ("messages") from one neuron (nerve cell) to the next target cell. The next target cell could be another nerve cell, muscle cell, or gland. Thus, neurons use both electrical charge and chemicals called ions to communicate with each other.

For more information about neurons communication, visit :

https://brainly.com/question/30547134

#SPJ4