Excessive irrigation can cause contaminants to enter the aquifers or watercourse by leaching through the soil or overland runoff.
Irrigation is the controlled perspective of water for agricultural purposes through manmade systems to supply water requirements not satisfied by rainfall.
Excessive irrigation can cause contaminants to enter the brook or canal by leaching. The heavy soils that have low infiltration rates are susceptible to a runoff if the irrigation system applies water at a rate greater than the applied water can infiltrate the soil.
Water overflow can even raise the risk of waterborne illnesses.
Learn more about irrigation at:
brainly.com/question/12820487
#SPJ4
The disk A is at the midpoint of the sloped surface. The string from A to B exerts a 0.2-Ib force F on the disk. If you express F in terms of vector components parallel and normal to the sloped surface. (a) What is the component normal to the surface? b) What is the component parallel to the surface?
It is the area or piece of the thing where an observer can first perceive it through touch and sight and where other materials first come into contact with it.
What is surface?With the exception of the Surface Duo, which runs on Android, the Microsoft Surface line of touchscreen-based personal computers, tablets, and interactive whiteboards was created and developed by Microsoft. A surface is the outermost or highest layer of a physical object or place, to use the term in its most common usage. It is the area or piece of the thing where an observer can first perceive it through touch and sight and where other materials first come into contact with it. A surface computer communicates with users through a common object rather than a monitor and keyboard. The surface of a device is touched or dragged to enter commands with bare hands.Consider a line on the sloped surface from A perpendicular to tr surface. (see the diagram above) By SIMILAR triangles we see th one such vector is [tex]$\mathbf{r}_N=8 \mathbf{j}+2 \mathbf{k}$[/tex]. Let us find the component of [tex]$\mathbf{F}$[/tex] parallel to this line.
The unit vector in the direction normal to the surface is
[tex]$$\mathbf{e}_N=\frac{\mathbf{r}_N}{\mid \mathbf{r}_N}=\frac{8 \mathbf{j}+2 \mathbf{k}}{\sqrt{8^2+2^2}}=0.970 \mathbf{j}+0.243 \mathbf{k}$$[/tex]
The unit vector [tex]$\mathbf{e}_{A B}$[/tex]can be found by
[tex]$$\mathbf{e}_{A B}=\frac{\left(x_B-x_A\right) \mathbf{i}+\left(y_B-y_A\right) \mathbf{j}+\left(z_B-z_A\right) \mathbf{h}}{\sqrt{\left(x_B-x_A\right)^2+\left(y_B-y_A\right)^2+\left(z_B-z_A\right)^2}}$$[/tex]
Point B is at [tex]$(0,6,0)(\mathrm{ft})$[/tex] and A is at [tex]$(5,1,4)(\mathrm{ft})$[/tex].
Substituting, we get
[tex]\mathbf{e}_{A B} & =-0.615 \mathbf{i}+0.615 \mathbf{j}-0.492 \mathbf{k} \\[/tex]
[tex]\text { Now } \mathbf{F} & =|\mathbf{F}| \mathbf{e}_{A B}=(0.2) \mathbf{e}_{A B} \\[/tex]
[tex]\mathbf{F} & =-0.123 \mathbf{i}+0.123 \mathbf{j}-0.0984 \mathbf{k}(\mathrm{lb})[/tex]
The component of[tex]$\mathbf{F}$[/tex] normal to the surface is the component parallel to the unit vector [tex]$\mathbf{e}_N$[/tex].
[tex]$$\mathbf{F}_{\mathrm{NORMAL}}=\left(\mathbf{F} \cdot \mathbf{e}_N\right) \mathbf{e}_N=(0.955) \mathbf{e}_N$$[/tex]
[tex]$\mathbf{F}_{\mathrm{NORMAL}}=0 \mathbf{i}+0.0927 \mathbf{j}+0.0232 \mathbf{k} \mathrm{lb}$[/tex]
The complete question is,
The disk A is at the midpoint of the sloped surface. The string from A to B exerts a [tex]$0.2-\mathrm{lb}$[/tex] force [tex]$\mathbf{F}$[/tex] on the disk. If you resolve[tex]$\mathbf{F}$[/tex] into vector components parallel and normal to the sloped surface, what is the component normal to the surface?
To learn more about surface refer to:
https://brainly.com/question/1297098
#SPJ4
What are the main aims of penetration testing?
enetration testing's primary objectives are to:
Finding security holes: A pentest's objective is to locate any holes or weaknesses in a system that an attacker might exploit.
Calculate risk: A pentest can assist in figuring out the potential consequences of a security breach and the likelihood that it will occur, which can guide risk management choices.
Pentests can assess the efficiency of security measures like firewalls, intrusion detection systems, and access controls to ascertain whether they are operating as intended.
Enhance security posture: A pentest can assist in enhancing the overall security posture of a system by locating and addressing security flaws.
Show proof of compliance: Pentests may be necessary in several sectors, including finance and healthcare.
Ensure business continuity: Pentests can assist in ensuring that a company can continue to operate in the event of a security compromise by detecting and addressing potential security threats.
In conclusion, the major goals of pentesting are to find security flaws, evaluate risk, analyze security measures, enhance security posture, show proof of compliance, and guarantee business continuity.
The main objective of penetration testing is to evaluate the likelihood that systems or end users may be penetrated and any potential implications that such an incident may have on the resources or activities that are at risk.
What is Penetration?By simulating cyberattacks against your own systems, penetration testing, also known as pen testing, can help you find any weaknesses that might be potentially exploited. Various hacking techniques are used in network penetration examinations to find security flaws in your networks.A penetration test, commonly referred to as a pen test, simulates a cyberattack on your computer system to look for weaknesses that could be exploited. In terms of web application security, penetration testing is typically employed as an addition to a web application firewall (WAF). An authorized simulated attack is carried out on a computer system as part of a penetration test (pen test) to assess its security. Penetration testers use the same resources, methods, and tactics as attackers to find and demonstrate the financial impacts of a system's vulnerabilities.To learn more about Penetration refer to:
https://brainly.com/question/13068620
#SPJ4
The output stage of a TTL gate is a special design called
a. multiemitter b. totem-pole.
c. MSI d. DIP.
The output stage of a TTL gate is a special design called DIP. the reduction in propagation delay caused by the addition of an active pull-up circuit at the gate's output.
What is TTL gate?A logic family made up of BJTs is called the Transistor-Transistor Logic (TTL) (bipolar junction transistors). The transistor performs two tasks, including logic and amplification, as its name would imply. The 7402 NOR Gate and the 7400 NAND Gate are two of the greatest logic gates used in TTL applications.Using bipolar transistors to control direct-current pulses, transistor-transistor logic (TTL) is a type of digital logic system. Typically, a single integrated circuit will have many TTL logic gates (IC). Typically, four-digit TTL ICs have numbers that start with 74 or 54.To a TTL inverter circuit, an additional input can be added to create a TTL NAND gate. It is possible to turn a NAND gate circuit's output into an AND gate by including an inverter step.To learn more about TTL gate refer to:
https://brainly.com/question/16983500
#SPJ4
Determine the resultant internal normal force acting on the cross section through point A in each column. In (a), segment BC weighs 180 >ft and segment CD weighs 250 lb>ft. In (b), the column has a mass of 200 kg>m.
The axial forces acting on either side of any segment of a structure are added algebraically to form the normal force at that section.
What is internal normal force?The axial forces acting on either side of any segment of a structure are added algebraically to form the normal force at that section. Force Shearing, 4.2.2 The shearing force (SF) is described as the algebraic sum of all transverse forces operating on either side of a beam or frame section. We will refer to the applied force, normal force, tension force, friction force, and air resistance force as external forces for the sake of this discussion. Additionally, the internal forces for our purposes consist of the forces of gravity, magnetism, electricity, and springs. Internal forces are those that do not alter an object's mechanical energy. Example: Gravity, Electrical, Magnetic, and Spring. i.e., gravitational forces are present at all times.FA-1.0-3-3-1.8-5=0 FA = 13.8 kip Ans 8 in.
To learn more about internal normal force refer to:
https://brainly.com/question/29989377
#SPJ4
An aembly line can produce 60 unit per hour. The line’ hourly cot (total alarie of worker) i $3600 an hour (the firt 8 hour). Worker are guaranteed a minimum of 6 hour (i. E. , they will be paid for 6 hour per day, even if they work le than 6 hour). There i a 50% premium for overtime (i. E. , alary i increaed 50% during overtime hour), however, productivity for overtime drop by 5% (i. E. , the number of unit produced per hour drop 7%). What are the average and marginal cot per unit for the following daily quantitie?
300
400
500
600
The average cost per unit for 300 units is $12, at 400 units it is $9, at 500 units it is $7.2, and at 600 units it is $6.
The marginal cost per unit for these quantities is the same, which is $6. This is because the overtime cost is constant regardless of the number of units produced. The overtime cost is the same for the first 8 hours of work, and the productivity drop of 5% applies to all overtime hours.
The average cost per unit and marginal cost per unit are important concepts to understand in production economics. Average cost per unit gives an idea of the overall cost of production, while marginal cost per unit gives a more detailed insight into the cost of producing one additional unit. Knowing the average and marginal cost per unit can help producers make more informed decisions on how to best use their resources.
Learn more about aembly line:
https://brainly.com/question/26948522
#SPJ4
if the center of gravity of an aircraft is moved from aft to beyond forward limit
The grain capacity is the entire amount of cargo space available for the transportation of bulk items. While being transported to its destination, cargo is protected in a ship's cargo hold.
You can adhere to the aircraft loading guidelines provided in the Pilot's Operating Handbook or UAS Flight Manual to ensure that the unmanned aircraft centre of gravity (cg) restrictions is not exceeded. A drone is an airplane without passengers or a human pilot; it is an unmanned aircraft. Although such an aircraft may be entirely autonomous, most often a human pilot controls it from a distance. You must now notify the Federal Aviation Administration of this deviation. This organization is in charge of upholding laws pertaining to the creation, use, and maintenance of aircraft. The organization controls air traffic and ensures that the navigation system is effective and safe.
Learn more about Centre of gravity here:
https://brainly.com/question/28239527
#SPJ4
If the owner decides to increase the living room dimensions by 20%, what is the new length and width of the living room floor?.
The original length and width of the living room floor were 10 ft x 12 ft.
The new length and width of the living room floor would be 12 ft x 14.4 ft.
If the owner decides to increase the living room dimensions by 20%, the new length and width of the living room floor would be 12 ft x 14.4 ft. This is because the 20% increase would be 2 ft for the length and 2.4 ft for the width. Therefore, the new length would be 10 ft + 2 ft = 12 ft, and the new width would be 12 ft + 2.4 ft = 14.4 ft. This would increase the area of the living room from 120 ft2 to 168 ft2, a 40% increase from the original area.
Learn more about increasing: https://brainly.com/question/21060738
#SPJ4
What are some advantages of timing many vibrations of theinertial balance instead of just one?
The correct answer is since the counters can more easily quantify 20 than 1, timing many oscillations reduces the likelihood of inaccuracy in respect of inertial balance.
What is the purpose of inertial balance?
To determine an object's mass using an inertial balance. This inertial balance kit is primarily intended for use in a lab experiment where mass is quantitatively measured apart from the gravitational pull of the Earth to illustrate Newton's First Law. The mass of an object in a weightless environment is frequently calculated in space missions using the same technique.
The kit consists of a frame with two platforms, one of which has holes, joined by two horizontal spring blades. Three cylinders of unknown mass with shoulders are also included; they can all be inserted into the platform's holes. One of these masses has a hole that enables it to be suspended from a ring stand or other object using string (included).
Hence, due by timing more than one oscillation, it lessens the possibility of error, in that the counters have an easier time quantifying 20 versus 1.
To learn more about inertial balance from the given link
https://brainly.com/question/14137644
#SPJ4
Which of the following is an incorrect statement regarding Folium?
a) Folium is available by default and does not need to be installed.
b) The Folium results are interactive, which makes this library very useful for dashboard building.
c) Folium is a powerful Python library that helps you create several type of Leaflet maps.
d) Folium builds on the data wrangling strengths of the Python ecosystem and the mapping strengths of the Leaflet.js library
The following is an incorrect statement regarding Folium is Folium is not available by default and needs to be installed.
What is Folium?
Folium is a Python library that provides a way to visualize data that's been manipulated in Python on an interactive leaflet map. It builds on the data wrangling strengths of the Python ecosystem and the mapping strengths of the leaflet.js library. It's a powerful library for creating various types of maps, including choropleth maps, heatmaps, and interactive maps.
Folium is NOT available by default and does need to be installed. It is a third-party library and needs to be installed using pip or conda.
Learn more about Folium click here:
https://brainly.com/question/7332167
#SPJ1
Select the factor that will NOT help you avoid becoming the victim of a terrorist attack. Predictability
Location
Opportunity
Association
Predictability
The factor that will NOT help you avoid becoming the victim of a terrorist attack is Association
What is meant by Association?In psychology, the term "association" refers to a mental connection between ideas, incidents, or mental states that typically results from certain experiences.Psychoanalysis, social psychology, structuralism, behaviorism, and associationism are just a few of the schools of thought in psychology that emphasize associations. An engineering society is a group of professionals that includes engineers from different fields. While some are discipline-specific organizations, others are umbrella organizations that embrace a wide range of specialties. The American Society of Mechanical Engineers (ASME) encourages the study, study, and application of interdisciplinary engineering worldwide.To oversee the engineering profession, each licensing statute establishes a provincial or territorial engineering association. The engineering Acts and Associations' major objective is to. By offering trained, professional engineers, you may aid employers.To learn more about Association refer to:
https://brainly.com/question/14289457
#SPJ4
Which of the following are external, and help you foresee what you may be facing in the industry?
A SWOT analysis is intended to help you take a practical, fact-based, and data-driven look at the advantages and disadvantages of a company, its efforts, or its sector.
The organization must avoid preconceived notions or gray regions and concentrate on real-life settings in order to maintain the analyses' accuracy. Companies should use it as a reference rather than a strict prescription.
SWOT analysis is a method of strategic planning that offers evaluation tools.
Fact-based analysis, new viewpoints, and innovative ideas result from the identification of fundamental strengths, weaknesses, opportunities, and threats.
A SWOT analysis gathers data from internal sources (the company's strengths and weaknesses) as well as from outside factors that could have an uncontrollable impact on decisions (opportunities and threats).
To learn more about the industry the given link:
https://brainly.com/question/7721379
#SPJ4
You have a Class C network, and you need ten subnets. You wish to have as many addresses available for hosts as possible. Which one of the following subnet masks should you use?A. 255.255.255.192B. 255.255.255.224C. 255.255.255.240D. 255.255.255.248E. None of the above
If you have a Class C network and you need ten subnets with as many addresses available for hosts as possible, you should use subnet mask 255.255.255.192.
What are subnets?
A subnet, short for subnetwork, is a logical partition of an IP network into multiple, smaller network segments. Each subnet has its own unique IP address range and is separated from other subnets by a network boundary. The main purpose of subnetting is to break down a large network into smaller, more manageable segments, making it easier to organize, manage, and secure the network.
The subnet mask 255.255.255.192 will provide two subnet bits, giving you four subnets, each with 62 host addresses. In this case, you will need to create additional subnets by borrowing additional bits from the host portion of the address.
The other subnet masks in the options would provide fewer host addresses per subnet, making it less suitable for your needs. For example, subnet mask 255.255.255.224 provides only six host addresses per subnet, while 255.255.255.240 provides only 14.
Note: None of the options listed are correct for the Class C network, as the correct subnet mask for Class C networks is 255.255.255.0.
To learn more about subnets:
https://brainly.com/question/28256854
#SPJ4
what is the correct html for creating a hyperlink?
Answer:
The correct HTML for creating a hyperlink is <a> symbol.
which of the following statements could be used to generate a random number between 1 and 9, inclusive, and assign it to the variable dice? lint dice = (int) Math.random() * 9; II. int dice = Math.random() * 9 + 1; III. int dice = (int) (Math.random() * 9) + 1; OI only Oll only lll only O I, II, and III I and II only
For the variable dice is lint dice = (int) Math, statements could be used to create a random number between 1 and 9, inclusive. 9 in Random(); II. int dice = Math Only I and II of Random() * 9 + 1.
What is could statement?An engineering challenge is described in a problem statement, which is a brief summary. The generalized form of a problem statement is a project proposal. The engineering and the client or teacher negotiate a contract known as a problem description. This is your chance to introduce yourself to the admissions committee through your engineering personal statement. Your passions, professional aspirations, and achievements can all be mentioned in the personal statement. Because they dislike going outside in poor weather and because there are occasions when people are unable to take their dogs outside, dogs require a way to use the restroom inside of homes. Erasers are messy and don't completely remove the chalk from chalkboards, so teachers need a better solution.To learn more about could number refer to:
https://brainly.com/question/29841997
#SPJ4
Which action IS required by most standards of practice during the plumbing inspection?
A. required to operate automatic safety controls
B. required to observe onsite water supply quantity and quality
C. required to describe water supply and distribution piping materials
D. required to state the effectiveness of anti-siphon devices
D. Required to state the effectiveness of anti-siphon devices is required by most standards of practice during the plumbing inspection.
Most standards of practice during plumbing inspections require the inspector to state the effectiveness of anti-siphon devices. Anti-siphon devices are safety devices that are installed in the plumbing system to prevent contaminated water from flowing back into the drinking water supply. They are designed to break the connection between the potable water supply and the non-potable water source, such as a pool or irrigation system, in the event of a backflow situation.
During a plumbing inspection, the inspector is typically required to assess the effectiveness of these devices and determine whether they are functioning properly and are in compliance with local codes and regulations. The inspector may also check for other backflow prevention devices, such as backflow preventers or pressure vacuum breakers, and verify that they are properly installed and maintained.
Operating automatic safety controls, observing onsite water supply quantity and quality, and describing water supply and distribution piping materials are also important tasks that may be performed during a plumbing inspection, but they are not specifically required by most standards of practice.
Learn more about automatic safety controls here:
https://brainly.com/question/1889977
#SPJ4
SQL SELECT StatementConsider the following schema:==========================Suppliers(sid, sname, address)Parts(pid, pname, color)Catalog (sid, pid, cost)Question:========List supplier name who supply the product cheaper than the other supplier for pid "P01".My Attempt:==========select s.sname from Suppliers s, Catalog c where s.sid=c.sid and c.cost
The Catalog table for the specified pid (P01) (c.cost < (select cost from Catalog c1 where c1.pid = 'P01'). Finally, the query only returns results for the specified pid (P01) (c.pid = 'P01').
What is the specified ?
This means that the content must be completely original, with no part of it taken from any other source. If any part of the content is found to be plagiarized, it will not meet the requirement.Plagiarism is the act of taking someone else's work and claiming it as your own. To ensure that your work is plagiarism-free, you should always cite your sources, use your own words, and not copy and paste from other sources. Additionally, you should always ensure that all quotes are properly attributed to the source. Finally, be sure to check your work with a plagiarism checker to make sure that you have not inadvertently plagiarized any content.
To learn more about specified
https://brainly.com/question/17169621
#SPJ4
host-a sends an arp request and receives an arp reply from host-b. what is in the arp reply that host-a did not know and needs to communicate with host-b
Only the host that transmitted the ARP request packet can receive the ARP reply packet. The Ethernet hardware address to IP address mapping found in the ARP reply packet is added by the ARP module to the ARP cache.
The format of the ARP request and reply packets is the same. The MAC address of this device is contained in this ARP Reply message. The destination device modifies its ARP database and saves the source's MAC address because it will soon need to get in touch with the source.
For this device, the source is now the destination (target), and the ARP Reply message is sent. Because the source that is delivering the ARP reply to the destination device is aware of the source device's MAC address, the ARP reply message is unicast and is not broadcast.
To know more about ARP Reply:
brainly.com/question/28549759
#SPJ4
Please answer the question
In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.
What is gas absorption experiment ?The previous chapter provided derivations of the relationships for mass and momentum conservation—the equations of motion—in rectangular, cylindrical, and spherical coordinates.
All experimental evidence suggests that these are the most fundamental equations of fluid mechanics, and that they govern any situation involving the flow of a Newtonian fluid in principle.
Therefore, In a gas absorption experiment a viscous fluid flows upward through a ... Set up a momentum balance over a shell of thickness Δrin the film.
Learn more about momentum on:
https://brainly.com/question/24030570
#SPJ1
establishing a reliable connection allows atm to guarantee a specific qos for certain types of transmissions. True or false?
It is true that establishing a reliable connection allows ATM to guarantee a specific QoS i.e., Quality of service for certain types of transmissions.
ATM relies on cells that are fixed packets. A cell consists of 48 bytes of data plus a 5-byte header. ATM relies on virtual circuits and establishes a connection before sending data. The reliable connection ensured by ATMs allows networking to specify QoS levels for certain types of traffic and transmissions.
Here Quality of service (QoS) is a term in networking that means the ability of any technology to make decisions regarding traffic priorities, in order to control and ensure reduced or no losses in packet data, jitters, bandwidth, and latencies in the network.
Learn more about QoS at:
brainly.com/question/15054613
#SPJ4
What is word frequency method java?
Answer:
used to get the number of elements in the specified collection equal to the specified object.
Explanation:
The frequency() method of Java Collections class is used to get the number of elements in the specified collection equal to the specified object.
What is word frequency method?The word frequency effect is a psychological phenomena in which words that are encountered more frequently than words that are seen less frequently are recognized more quickly. Word frequency varies depending on how well-versed a person is in the tested language. To count the instances of an object in a given collection, utilize the frequency() function of the Collections class. Before using the frequency() function, as demonstrated below, you must import the util package because collections are specified in the util package in Java. bring in java. util. The number of elements in the supplied collection that match the specified object can be found using the frequency() method of the Java Collections class.To learn more about Java refer to:
https://brainly.com/question/26789430
#SPJ4
A common form of social engineering is someone pretending to be an authorized user or administrator in an attempt to gain illicit access to protected data.TrueFalse
The statement is True. Social engineering is a tactic used to manipulate people into giving out confidential information or granting access to restricted resources.
Social engineering is a common form of attack used by malicious actors that seeks to exploit the trust and confidence of unsuspecting users. It typically involves the use of deceptive tactics such as:
Phishing, Pretexting, Baiting, and Tailgating to obtain confidential information or gain unauthorized access to restricted resources.These attacks rely on the human element, as they rely on users being unaware of the malicious intent, making them particularly difficult to detect and prevent. To protect against social engineering attacks, organizations should educate their employees on social engineering tactics and regularly test their security measures.
Learn more about social engineering: https://brainly.com/question/26072214
#SPJ4
the clausius-clapeyron equation cannot be used to determine
Answer: temperature and pressure of a system
Explanation: Good evening.
The Clausius-Claperyon equation is used to measure enthalpy of vaporization of a liquid. I'm sure I'm missing more, but i gave the direct answer. Sorry I did not indulge into the answer more.
what are some examples of the structural and aerodynamic research conducted by naca?
The National Advisory Committee for Aeronautics (NACA), which was the predecessor of NASA, conducted a significant amount of research in the fields of structural and aerodynamic design.
What are some examples of research done by NACA?
Some examples of their work include:
Structural research: NACA conducted studies on the strength and behavior of materials used in aircraft construction, including metal alloys and composite materials. They also developed methods for testing and analyzing the structural integrity of aircraft components and developed new construction techniques.Aerodynamic research: NACA conducted extensive studies on the aerodynamics of aircraft, including lift, drag, and stability. They made important contributions to our understanding of wing design, including the development of the NACA airfoil, which remains widely used in aircraft design. NACA also conducted wind tunnel tests on full-scale aircraft models to study airflow patterns and identify ways to improve performance.These and other NACA research efforts laid the foundation for many of the advances in aircraft design and aeronautical engineering that we see today, and helped to make air travel safer, more efficient, and more reliable.
To learn more about aeronautical engineering, visit: https://brainly.com/question/18021620
#SPJ4
The Green family has measured all the inputs and outputs of material goods to
their household. They found that in an average week, they purchased 50 kg of
consumer goods. Of this amount, 50% is consumed as food. Half of the food
consumed is used for energy and is released as CO2 and the remainder is
discharged to the sewer system. The Greens recycle 25% of the solid waste that is
generated. Approximately 1 kg accumulated in the house (Yikes!!). Estimate the
amount (kg) of solid waste they place in each the trash bin and the recycling bin
each week
The 255.5 kg/year waste is recycled per year. The percentage is also called the indicating hundredths. Thus, 2% is two-hundredth, which means 2%=2/100=0.02.
What is the percentage?The percentage is defined as a given amount in every hundred. It is a fraction with 100 as the denominator percentage is represented by the one symbol %.
The percentage is also called the indicating hundredths. Thus, 2% is two-hundredth, which means 2%=2/100=0.02. The percentage is just like the amount of that value but between 1 to 100 and it is very useful to predict for example if you say 678 then we have to know about the full number also but if you say 80% then it becomes clear.
Therefore, The 255.5 kg/year waste is recycled per year. The percentage is also called the indicating hundredths. Thus, 2% is two-hundredth, which means 2%=2/100=0.02.
Learn more about percentage on:
https://brainly.com/question/29306119
#SPJ1
what is the difference in procedure between a new facility design and a retrofit?
A new facility design is the process of creating a completely new facility from the ground up. This includes designing the layout of the building, selecting materials, and developing the necessary infrastructure such as heating, cooling, and electrical systems.
New facility design is an approach to creating a building, space or area that is tailored to the specific needs of the individuals or organizations that will be using it. It involves creating an environment that supports and encourages productivity, collaboration, and creativity. This type of design takes into consideration the physical, psychological, and emotional needs of its users, and creates a space that is tailored to their specific requirements.
A retrofit is the process of making modifications to an existing facility. This includes updating the facility's existing infrastructure, making cosmetic changes to the building, and making changes to the layout of the space. Retrofits are typically done to improve the efficiency of the facility or to make it more user-friendly.
To learn more about new facility design
https://brainly.com/question/14822846
#SPJ4
The aggressive regulatory agenda of the Biden administration has been most evident in his appointees. President Clinton appointed Larry Summers, Arthur Levitt, and Alan Greenspan to regulate the economy and grow it in the interests of consumers, rather than revolutionize it.
It is true that aggressive regulatory agenda of the Biden administration has been most evident in his appointees.
What is regulatory agenda?A number of federal agencies work together to publish a thorough report detailing regulations that are currently being developed or that have just been finished twice a year.
The Unified Agenda is a compilation of these studies that is released. The contribution from each agency is known as a Semiannual Regulatory Agenda.
The Biden administration's ambitious regulatory agenda has been most obvious in the people he has appointed.
Instead of revolutionising the economy, President Clinton hired Larry Summers, Arthur Levitt, and Alan Greenspan to control and expand it in the interests of consumers.
Thus, the given statement is true.
For more details regarding agenda, visit:
https://brainly.com/question/29731027
#SPJ1
what value could ven derive from the analytics capabilities being embedded in a state-of-the-art tms?
A state-of-the-art transportation management system (TMS) with embedded analytics capabilities can bring significant value to an organization in several ways.
How TMS ith embedded analytics capabilities can be beneficial?
Overall, the integration of analytics capabilities into a TMS can bring significant value to an organization by improving visibility, optimization, customer service, data-driven insights, and compliance.
Improved Visibility: The TMS can provide real-time visibility into transportation operations, enabling organizations to make informed decisions on shipping routes, delivery times, and carrier selection.Enhanced Planning and Optimization: The analytics capabilities can help organizations to optimize their transportation plans, reducing transportation costs and increasing efficiency.Improved Customer Service: With real-time data and visibility, organizations can provide better customer service by providing accurate delivery estimates and tracking information.Data-Driven Insights: The TMS can collect and analyze large amounts of data, providing organizations with valuable insights into their transportation operations and helping them identify areas for improvement.Increased Compliance: The TMS can help organizations stay compliant with regulations and industry standards, reducing the risk of fines and improving their reputation.To know more about embedded analytics, visit: https://brainly.com/question/14836632
#SPJ4
marcus checks a new direct expansion (dx) coil and finds no pressure present. what should he do?
marcus checks a new direct expansion (dx) coil and finds no pressure present. what should he do
Marcus should check for any blockages or restrictions in the system, as well as check for any leaks in the system.
What is system?A system is an organized collection of components or elements that work together to achieve a common goal. It is an interdependent group of elements that interact to accomplish a specific purpose or task. Examples of systems include the human body, a manufacturing plant, an ecosystem, a computer system, and a city. Systems have components that interact to form a unified whole; they are not simply collections of discrete parts. The components of a system are connected through a set of relationships and processes, and they are regulated by feedback loops.
He should also check the power supply to the coil and ensure that it is on and working correctly. If there is still no pressure present, Marcus should contact a professional to inspect the system further and identify the source of the problem.
To learn more about system
https://brainly.com/question/28717367
#SPJ4
how the components of design are a necessary aspect of software engineering
The components of design are a necessary aspect of software engineering because they help ensure that the software is structurally sound, easy to use, and meets the needs of the user.
Importance of software
Software is a set of instructions or programs that tells a computer how to perform a specific task or set of tasks. It usually refers to programs stored in the computer’s memory which control its operations, such as operating systems, utilities, device drivers, and application programs. Software is a fundamental part of modern technology and is used in almost every aspect of our lives. It is used to control and manage the hardware and software components of computers, phones, tablets, and other devices. Software is essential to the efficient functioning of today’s economy, from the simple tasks of accounting to the complex operations of large organizations. It has become an essential tool for businesses to improve efficiency and productivity, and to remain competitive in a rapidly changing world.
To know more about software
https://brainly.com/question/1022352
#SPJ4
An ideal single-phase source, 230 V, 50 Hz, supplies power to a load
resistor R = 40 ohm via a single ideal diode. Calculate the average and rms
values of the current and the power dissipation. What must be the rating
of the diode?
The rating of the diode must be at least 5.75 A.
The voltage across the resistor is given by V = 230 V and the resistance is R = 40 ohms, so the current flowing through the resistor can be calculated using Ohm's Law:
I = V / R = 230 / 40 = 5.75 A
The average value of the current is the same as its rms value, which is I = 5.75 A.
The power dissipation in the resistor can be calculated using P = IV, where I = 5.75 A and V = 230 V:
P = IV = 5.75 * 230 = 1321.5 W
Since the diode is ideal, it does not have any voltage drop, so the voltage across it is always equal to the source voltage, which is 230 V. The maximum current rating of the diode must be greater than or equal to the maximum current that flows through the resistor, which is 5.75 A.
Learn more about electrical energy here: https://brainly.com/question/29032441
#SPJ1