Answer:
group # = # valence electrons
group 2= 2 valence electrons
Explanation:
Mg is in group #2 and subsequently has 2 valence electrons (electrons on the outermost shell)
You have 263 mL of liquid mercury, what is the mass of mercury that you have?
Answer:3,550.5 g
Explanation:
Mass= density×volume
Mass= 13.5g/m.l×263ml
Mass=3,550.5 g
Please add me the brainleist!!!!!!!!
Convert 7.72 years into days.
Answer:2817.8
Explanation:multiply the value by 365
Explanation:
7.72 x 365= 2817.8 days
Arrange the following in order of increasing masses of 1 mole of CO32-, PO43-, SO42- Cl- S2- (1)
Which of the following correctly describes a mixture? (4 points)
The particles are chemically bondeg together, and they retain their individual physical and chemical pro
The particles are not chemically bonded, and they can only combine in certain set ratios.
The particles do not retain their individual chemical properties, and they can only be separated by chemi
The particles have no set ratio for how to combine, and they can be separated by physical means.
The statement the particles have no set ratio for how to combine, and they can be separated by physical means describes a mixture.
What is mixture?A mixture is made when two or more substances are combined, but they are not combined chemically. The components of a mixture can be easily separated. The components each keep their original properties. The proportion of the components are variables.Physical means like filtration, evaporation, and sublimation can all be used to separate mixtures. There is no chemical reaction that takes place. As a result, it can be physically detached because it is still theoretically divided into its constituent parts.
Hence, we can conclude that option D is the answer.
To learn more about mixture here
https://brainly.com/question/24898889
#SPJ2
please someone should explain gas laws to me
Answer:
Gas laws, Laws that relate the pressure, volume, and temperature of a gas. ... These two laws can be combined to form a single generalization of the behavior of gases known as an equation of state, PV = nRT, where n is the number of gram-moles of a gas and R is called the universal gas constant.
Explanation:
Hope it helps
2.Which of the following compounds when dissolved in water will turn blue litmus paper red? copper oxide, calcium oxide, sulphur oxide, sodium oxide, iron oxide
Answer:
Sulphur oxide
Explanation:
All of the above oxides with the exception of sulphur oxide are basic oxides and so will not turn blue litmus paper red when dissolved in water. Sulphur oxide, SO2 on the other hand, is an acid anhydride (a non-metallic oxide which dissolves in water to produce acid) rendering it the ability of turning blue litmus paper red when dissolved in water.
Answer:sulpher oxide
Explanation:
All of the compounds except sulpher dioxide are metallic oxide which means basic oxide and base change red litmus paper to blue while acid change blue to red so the answer is the acidic oxide or sulpher dioxide
HELP! What is a pure substance salt or seawater???? PLEASE HELP ME!
Answer:
Your answer is salt. Pure substances are made of materials with one type of molecule. Seawater has salt and water molecules, which is more than one, so your answer is salt.
Hope this helps!
Find the density of a substance that’s had a volume of 24.7mL and a mass of 49.1g. Give the answer with two decimals.
Answer:
1.99 g/mL
Explanation:
Use the formula d = m/v, where m is the mass and v is the volume.
Plug in the values:
d = 49.1/24.7
d = 1.99 g/mL
Answer:
About 1.99 g/mL
Explanation:
The density of a substance can be found using the following formula:
d= m/v
where m is the mass and v is the volume.
The mass of this substance is 49.1 grams and the volume is 24.7 milliliters.
m= 49.1 g
v= 24.7 mL
Substitute these values into the formula.
d= 49.1 g / 24.7 mL
Divide 49.1 g by 24.7 mL
d= 1.98785425 g/mL
We are asked to round to two decimal places, or the hundredth place. The 8 in the thousandth place tells us to round the 8 to a 9 in the hundredth place.
d ≈ 1.99 g/mL
The density of the this substance is approximately 1.99 grams per milliliter.
What is the iupac name of this structure?
Answer:
3–ethyl–4–methylhexane.
Explanation:
To name the above compound, do the following:
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent group attached to the compound.
4. Give the substituent the lowest possible count.
5. Combine the above to name the compound.
Now, we shall name the compound given in the question above as follow:
1. The compound contains only single bond. Therefore, the compound belong to the alkane family.
2. The longest continuous carbon chain is 6 i.e hexane.
3. The substituent group attached are:
i. Methyl, CH3.
ii. Ethyl, CH2CH3.
4. we shall name the substituents alphabetically i.e ethly will come before methyl. Therefore,
Ethyl is located at carbon 3.
Methy is located at carbon 4.
5. Therefore, the name of the compound is:
3–ethyl–4–methylhexane.
does the atomic mass come from the masses of both protons and electron
Answer:
no
Explanation:
For any given isotope, the sum of the numbers of protons and neutrons in the nucleus is called the mass number. This is because each proton and each neutron weigh one atomic mass unit . By adding together the number of protons and neutrons and multiplying by 1 , you can calculate the mass of the atom.
Answer:
No
Explanation:
An element's mass number (A) is the sum of the number of protons and the number of neutrons. Protons and neutrons both weigh about one atomic mass unit or amu. Isotopes of the same element will have the same atomic number but different mass numbers.
Convert 200°F into °C
Which types of particles are found in the nucleus of the atom?
Answer:
Protons and neutron are found in the nucleus.
Answer:
The nucleus of the atom contains two types of subatomic particles: protons(have a positive electrical charge) and neutrons (have no electrical charge).
You buy several bags of balloons. On the package, it says that each bag has 100 balloons. He opens the bags and only one of them has 100 balloons inside; the other bags either have too many or too few. How would you describe this sample of bags?
Answer:
Accurate but not precise
Explanation:
The sample of balloon bags can be described as being accurate but not precise.
Recall that accuracy is the closeness of measurements to their true values while precision is the closeness of repeated measurement.
The balloon bags are accurate because it appears that the number of balloons in each bag is not far from the actual number of balloons that should be in them - exactly 100 in one and a few off in others. By the time the average number of balloons is calculated, it will not be far off from 100, if not exactly 100.
However, the sample bags are described as not being precise because of the inconsistency or lack of closeness in the number of balloons in each of them.
For an experiment, you are required to prepare a series of three solutions by diluting a cobalt(II) chloride stock solution. After making each solution, you notice that each is a different shade of pink. Which is the most concentrated?
a. the lightest pink solution you prepared
b. the darkest pink solution you prepared
c. the medium pink solution you prepared
d. the stock solution
Answer:
The stock solution
Explanation:
When preparing a series of solutions from a stock solution, the stock solution will always be the most concentrated solution of the set. Each of the subsequent solutions are prepared by dilution, which entails adding solvent to a portion of the stock solution. This will always result in a solution that is less concentrated than the stock solution.
A paper clip released gently into the liquid settles at the bottom of the cylinder. What best compares the densities of the substances?
The clip is denser than the three liquids, and water is denser than oil.
Oil is denser than water but less dense than the clip.
Corn starch is denser than the other liquids and the clip.
Oil is denser than the other liquids, and all liquids are denser than the clip.
Answer:
C.
Explanation:
Objects and liquids float on liquids of a higher density and sink through liquids of lower density. the water and corn starch sank under the oil as well so that means they are denser. The paper clip sank through all three liquids also. Hence, the answer would be the clip is denser than the three liquids, and water is denser than oil.
what instrument should we use if we had to carry out a small reaction
Answer:
This question appears incomplete
Explanation:
However, a glassware/instrument that is used to carry out small reactions is a beaker. It is a cylindrical instrument usually made of glass (so as not to take part in the reaction). It can also be put over a bunsen burner to heat up its content in the process of a chemical reaction. It is quite ideal for small reactions.
Which of the following questions can be answered by science?
a
What is the composition of air?
b
Should the driving age be reduced?
c
What is the purpose of our existence on Earth?
d
Should students be allowed to bring toys to school?
Answer:
(a), (b) and (c) I guessAnswer:
A. What is the composition of air?, B. Should the driving age be reduced?, D.
Should students be allowed to bring toys to school? Answer: A,B,D.
Convert 302 K into C
Answer:
302°K = 28.85°C
Explanation:
Formula: °K - 273.15 = °C
0°C is equal to roughly 273°K
Simply plug it into the formula to find your temperature:
302°K - 273.15 = °C
°C = 28.85
33. A student finds that the mass of 25ml of an unknown liquid is 20.5g. What is the density of this substance?
Answer:
Density, [tex]d=0.82\ g/cm^3[/tex]
Explanation:
It is given that,
Mass of an unknown liquid, m = 20.5 g
The volume of unknown liquid is 25 mL
We need to find the volume of the brass object. Mass per unit volume of an object is called its density.
We know that, 1 mL = 1 cm³
So, 25 mL = 25 cm³
[tex]d=\dfrac{m}{V}[/tex]
Putting the values, we get :
[tex]d=\dfrac{20.5\ g}{25\ cm^3}\\\\d=0.82\ g/cm^3[/tex]
So, the density of this substance is [tex]0.82\ g/cm^3[/tex]
How many bonds does argon group viii form
A. 0
B. 3
ΔH for the reaction below is -826.0 kJ/mol. Calculate the heat change when a 69.03-g sample of iron is reacted.4Fe(s) + 3 O2(g) --> Fe2O3(s)a. - 255.2 kJb. -510.5 kJc. -1020.9 kJd. -2042 kJe. -2.851 x 10^4 kJ
Answer:
c. -1020.9 kJ
Explanation:
4Fe (s) + 3 O₂ (g) --> 2 Fe₂O₃(s) ΔH = -826.0 kJ/mol.
atomic weight of iron = 56
69.03 g = 69.03 / 56
= 1.23268 moles
Heat released by 1.23268 moles
= 1.23268 x 826.0
= -1020.9 kJ .
at a molecular level describe the differences between a hot object and a cold object
Answer:
.
Explanation:
The hot object are those which have high energy atoms that moves with a very fast energy whereas the cold object are those which have low energy atoms and moves with low speed.
The atoms and molecules in a liquid are in constant motion. As temperature decreases, what is true of the particles in the liquid? (5 points)
Oa
The distance between the particles increases.
The attraction between the particles decreases.
Ob
Ос
The rate of partide movement decreases.
Od
The potential energy of the particles decreases
Answer:
A
Explanation:
Answer:
The distance between the particles increases
Density Practice
Answer the following questions about density.
1) Density is based on the
and the
of a material
2) A material with a low density tends to
I
3) A material with a high density tends to
4) Bobbing for apples is a game where people try to bite apples from a bucket of water. While in the
water, the apples float. Which is less dense, the apples or the water?
5) A cannonball rolls off of a pirate ship and sinks to the bottom of the ocean. Which was more dense, the
cannonball or the ocean water?
Answer:
1) mass and volume
2) float.
3) Sink
4) Apples
5) Cannonball
Explanation:
1) Density is based on the mass and volume of a material.
2) A material or an object with low density than water or liquid tends to float.
3) A material or an object with high density than water or liquid tends to sink.
4) The apples in the water have less density as they are floating in the water.
5) The cannonball is more dense than the ocean water and the ball sink in the less density water.
What do the spheres represent in a typical model of an atomic nucleus?
Answer:
Protons and Neutrons
Explanation:
That is what makes up the center of an atom
what are a few examples of what energy is?
✅Energy exists in many different forms✅
Examples of these are: light energy, heat energy, mechanical energy, gravitational energy, electrical energy, sound energy, chemical energy, nuclear or atomic energy and so on. Each forms can be converted or changed into the other forms.
IamSugarBee
If you have a cold drink on your hand, how does heat flow from the drink to your hand and from your hand to drink ?
Answer:
If two objects have different temperatures, heat will flow from the warmer object to the colder one. For instance, when you hold an ice cube, heat is transferred from your warm hand to the cold ice and melts it. Your hand feels cold because it is losing heat energy. ... energy by electromagnetic waves.
Hope it helped u if yes mark me BRAINLIEST!
Tysm!
I would appreciate it!
Answer: Because your body heats up the area where it gets cold so that how that works
Explanation:
Please help lol I dont understand it...
Answer:
It just means that you are supposed to find an object that is not used in a vacuum. For example, a hair-brush is not use in a vacuum lol
What concentration of ClO3â results when 967 mL of 0.367 M AgClO3 is mixed with 667 mL of 0.643 M Mn(ClO3)2?
Answer:
0.742M is the concentration of ClO₃⁻
Explanation:
The AgClO₃ contains 1 mole of ClO₃⁻ per mole of compound, but Mn(ClO₃)₂ contains 2 moles of ClO₃⁻ per mole of compound.
The moles of AgClO₃ are:
0.967L * (0.367moles / L) = 0.355 moles AgClO₃ = 0.355 moles of ClO₃⁻
And of Mn(ClO₃)₂:
0.667L * (0.643moles / L) = 0.429 moles Mn(ClO₃) * 2 = 0.858 moles of ClO₃⁻
That means total moles of ClO₃⁻ are:
0.355 moles + 0.858 moles = 1.213 moles ClO₃⁻ that are in 0.967L + 0.667L = 1.634L.
The concentration is:
1.213 moles ClO₃⁻ / 1.634L =
0.742M is the concentration of ClO₃⁻In a oxidation–reduction reaction, oxidation and reduction must occur simultaneously. Is this statement true or false?
Answer:
True
Explanation:
Oxidation and reduction always occur simultaneously. Gave example when a substance is oxidized or reduced? 1) The substance gaining oxygen or losing electron is oxidized. 2) The substance losing oxygen ( or gaining electron) is reduced. hope this helps you :)