Answer:
Waste products such as gums, oils, latex, resins, and so on are stored in plant parts such as barks, stems, and leaves. Plants eventually shed these parts. Orange oil, eucalyptus oil, jasmine oil, latex from the rubber tree, papaya tree gums, and acacia gums are all examples of stored waste products.
Explanation:
What is Alternation of generation
Answer:
Alternation of generations is the type of life cycle that occurs in those plants and algae in the Archaeplastida and the Heterokontophyta that have distinct haploid sexual and diploid asexual stages.
Explanation:
how many rounds of dna replication are there in a meiotic cell cycle?
Answer:
Two rounds
Explanation:
Meiosis is characterized by one round of DNA replication followed by two rounds of cell division, resulting in haploid germ cells. Crossing-over of DNA results in genetic exchange of genes between maternal and paternal DNA.
what is the dominant impact that humans have on alpine glaciers?
The researchers estimate that between 1990 and 2010, some 69 percent of the mass lost by the world's alpine glaciers can be traced to human influence – basically global warming. This 2013 file photo shows the Mendenhall Glaicer where it spills over the mountains above Mendenhall Lake in Juneau, Alaska.
Answer:
Human activity is playing an increasing role in the melting of glaciers, Austrian and Canadian scientists have found. One of the most disruptive effects of climate change, glacier retreat leads to rising sea levels, landslides and unpredictable availability of water downstream.
Explanation:
I hope it helpful to you.
...
Plzzzzz help meeeee plzzzzzzz
Answer:
59 is false and 60 and true
Explanation: I think it is right sorry if it is wrong. I hope this helps
Answer: 1) True 2) True
Explanation:
NO LINKS What controls circadian rhythms in humans? Explain how this process works.
Answer:
The circadian rhythms are controlled by a part of the brain called the Suprachiasmatic Nucleus (SCN), or a group of cells in the hypothalamus that responds to light and dark signals. Thid happens when our eyes perceive light, causing our retinas send a signal to our SCN.
How to determine recombination frequency.
Answer:
= # recombination/total progeny ×100
What is the main function of cellulose in plants? Cant pick between B and C
What invertebrate animals are the ancestors of tetrapods
A)jellyfish
B)cartilaginous fish
C)jawed fish
D)jawless fish
Answer:
D I believe
Explanation:
which macromolecule provides the building blocks for recovery and repair in forming new muscle?
Proteins provides the building blocks for recovery and repair in forming new muscle
how many cans of green beans in green bean casserole
If the environment gets cold, humans will often respond involuntarily by shivering in order to:
a. keep body temperature the same as the external temperature
b. increase body temperature
C. decrease body temperature
d. regulate blood pressure
Answer:
increases body temperature
Explanation:
this is because when you shiver your blood vessels contract which then increases your body temperature
If the environment gets cold, humans will often respond involuntarily by shivering in order to increase body temperature. So, the correct option is B.
What do you mean by Environment?An environment may be defined as anything that is present in the surroundings of living entities that is either biotic or abiotic.
The process of shivering causes the blood vessels to contract and relax at a rapid rate to maintain homeostasis. The signals of rapid contractions are sent by the hypothalamus through nerve impulses.
Therefore, the correct option for this question is B.
To learn more about Shivering, refer to the link:
https://brainly.com/question/14319427
#SPJ2
Name at least 3 different body systems and how they are being used while you walk and eat pizza at the same time. Try to include specific details about the organs in the body systems and how they work together. Please answer using your own words in complete sentences.
HELP ME ASAP PLEASE... 30 POINTSSSS
Answer:
skeletal system, nervous system, and digestive system
Explanation:
our nervous system controls our every movement (walking) and skeletal because it makes up the frame work if not we would be total blobs of jello haha. anyways but then when your eating our digestive system when we swallow if goes through the whole phase of digestive system. and then it has to come out somehow so the digestive system at the end we go ahead and do our business.
hope this helps!
Please help me with this! The question on the image
2.
No movement of water would have
occurred if they were isotonic.
3.
A. Side 2B. Side 1to control and co-ordinate the functions in blanks the true some chemical what are they
Answer:
yes
Explanation:
which tarsal bone articulates with the tibia and fibula
Answer:
the talus bone
Explanation:
hope it helps<3
mark me as brainliest
A test cross is performed to determine if a specific individual is a carrier. The results generate a 50/50 phenotypic ratio. The test subject was therefore ________.
Answer:
The test subject was therefore, Heterozygous
Which of the following statements is TRUE?
Paraplegia may occur when traumatic injury occurs along the upper vertebral column C1 to C7.
Quadriplegia may occur when traumatic injury occurs along the upper vertebral column C1 to C7.
Paraplegia is paralysis of everything below the neck.
None of the above
Answer:
b. Quadriplegia may occur when traumatic injury occurs along the upper vertebral column C1 to C7.
Explanation: is correct
Answer:
B
Explanation:
(thank you sunrise you've helped me with like 4 units now)
What is not an example of DNA?
Answer:
AMOGUS
Explanation:
Anything other than DNA is not an example of DNA
PLEASEEE HELP!! Ill mark brainlist
How/why does the DNA separate?
Discuss porosity or pores, electricity, DNAS charge & size of DNA pieces. Highlight all the 4 terms
Electrophoresis is a technique commonly used in the lab to separate charged molecules, like DNA, according to size.
Gel electrophoresis is a technique commonly used in laboratories to separate charged molecules like DNA?, RNA? and proteins? according to their size.
Charged molecules move through a gel when an electric current is passed across it.
An electric current is applied across the gel so that one end of the gel has a positive charge and the other end has a negative charge.
The movement of charged molecules is called migration. Molecules migrate towards the opposite charge. A molecule with a negative charge will therefore be pulled towards the positive end (opposites attract!).
The gel consists of a permeable matrix, a bit like a sieve, through which molecules can travel when an electric current is passed across it.
Smaller molecules migrate through the gel more quickly and therefore travel further than larger fragments that migrate more slowly and therefore will travel a shorter distance. As a result the molecules are separated by size.
Gel electrophoresis and DNA
Electrophoresis enables you to distinguish DNA fragments of different lengths.
DNA is negatively charged, therefore, when an electric current is applied to the gel, DNA will migrate towards the positively charged electrode.
Shorter strands of DNA move more quickly through the gel than longer strands resulting in the fragments being arranged in order of size.
The use of dyes, fluorescent? tags or radioactive? labels enables the DNA on the gel to be seen after they have been separated. They will appear as bands on the gel.
A DNA marker with fragments of known lengths is usually run through the gel at the same time as the samples.
By comparing the bands of the DNA samples with those from the DNA marker, you can work out the approximate length of the DNA fragments in the samples.
How is gel electrophoresis carried out?
Preparing the gel
Agarose gels? are typically used to visualise fragments of DNA. The concentration of agarose used to make the gel depends on the size of the DNA fragments you are working with.
The higher the agarose concentration, the denser the matrix and vice versa. Smaller fragments of DNA are separated on higher concentrations of agarose whilst larger molecules require a lower concentration of agarose.
To make a gel, agarose powder is mixed with an electrophoresis buffer and heated to a high temperature until all of the agarose powder has melted.
The molten gel is then poured into a gel casting tray and a “comb” is placed at one end to make wells for the sample to be pipetted into.
Once the gel has cooled and solidified (it will now be opaque rather than clear) the comb is removed.
Many people now use pre-made gels.
The gel is then placed into an electrophoresis tank and electrophoresis buffer is poured into the tank until the surface of the gel is covered. The buffer conducts the electric current. The type of buffer used depends on the approximate size of the DNA fragments in the sample.
Preparing the DNA for electrophoresis
A dye is added to the sample of DNA prior to electrophoresis to increase the viscosity of the sample which will prevent it from floating out of the wells and so that the migration of the sample through the gel can be seen.
A DNA marker (also known as a size standard or a DNA ladder) is loaded into the first well of the gel. The fragments in the marker are of a known length so can be used to help approximate the size of the fragments in the samples.
The prepared DNA samples are then pipetted into the remaining wells of the gel.
When this is done the lid is placed on the electrophoresis tank making sure that the orientation of the gel and positive and negative electrodes is correct (we want the DNA to migrate across the gel to the positive end).
Separating the fragments
The electrical current is then turned on so that the negatively charged DNA moves through the gel towards the positive side of the gel.
Shorter lengths of DNA move faster than longer lengths so move further in the time the current is run.
The distance the DNA has migrated in the gel can be judged visually by monitoring the migration of the loading buffer dye.
The electrical current is left on long enough to ensure that the DNA fragments move far enough across the gel to separate them, but not so long that they run off the end of the gel.
Illustration of DNA electrophoresis equipment used to separate DNA fragments by size. A gel sits within a tank of buffer. The DNA samples are placed in wells at one end of the gel and an electrical current passed across the gel. The negatively-charged DNA moves towards the postive electrode. Image credit: Genome Research Limited
tank.
I think its B? Can someone explain it to me tho
Explanation:
I think it should be C because increase in temperature increases molecular motion. Therefore the speed of the moving molecules of both enzymes as well as the substrate will be accelerated. This
will enhance the colliding probability for both enzyme active sites and substrate molecules and more collisions occur between the enzyme active sites and substrate molecules generate greater chances for the reaction to occur. This can continue up to a certain point, after which there is a rapid decline in enzyme activity. This point is referred to
as optimum temperature. When the temperature increases beyond the optimum temperature, the hydrogen bonds, ionic bonds and other weak chemical bonds of enzyme active sites may be disrupted.
This will result a change in the shape of the active site of enzyme which will alter the complementary nature of the active site of enzyme molecules. Therefore, the
complementary binding of enzyme active sites and substrate molecules will be prevented. The above event is called as denaturation of enzyme molecules.
Therefore the rate of enzyme catalyzed reaction or in this case, photosynthesis will start to decline when the temperature increases beyond the optimum temperature and stops completely at certain
temperature, although rate of collision will keep on increasing.
The different forms matter can take are referred to as states or countries.
Answer:
Three States of Matter
Learning Objective
Describe the three states of matter
Key Points
Matter can exist in one of three main states: solid, liquid, or gas
The states of matterThis diagram shows the nomenclature for the different phase transitions.
Solids
A solid’s particles are packed closely together. The forces between the particles are strong enough that the particles cannot move freely; they can only vibrate. As a result, a solid has a stable, definite shape and a definite volume. Solids can only change shape under force, as when broken or cut.
In crystalline solids, particles are packed in a regularly ordered, repeating pattern. There are many different crystal structures, and the same substance can have more than one structure. For example, iron has a body-centered cubic structure at temperatures below 912 °C and a face-centered cubic structure between 912 and 1394 °C. Ice has fifteen known crystal structures, each of which exists at a different temperature and pressure.
A solid can transform into a liquid through melting, and a liquid can transform into a solid through freezing. A solid can also change directly into a gas through a process called sublimation.
Liquids
A liquid is a fluid that conforms to the shape of its container but that retains a nearly constant volume independent of pressure. The volume is definite (does not change) if the temperature and pressure are constant. When a solid is heated above its melting point, it becomes liquid because the pressure is higher than the triple point of the substance. Intermolecular (or interatomic or interionic) forces are still important, but the molecules have enough energy to move around, which makes the structure mobile. This means that a liquid is not definite in shape but rather conforms to the shape of its container. Its volume is usually greater than that of its corresponding solid (water is a well-known exception to this rule). The highest temperature at which a particular liquid can exist is called its critical temperature.
A liquid can be converted to a gas through heating at constant pressure to the substance’s boiling point or through reduction of pressure at constant temperature. This process of a liquid changing to a gas is called evaporation.
Gases
Gas molecules have either very weak bonds or no bonds at all, so they can move freely and quickly. Because of this, not only will a gas conform to the shape of its container, it will also expand to completely fill the container. Gas molecules have enough kinetic energy that the effect of intermolecular forces is small (or zero, for an ideal gas), and they are spaced very far apart from each other; the typical distance between neighboring molecules is much greater than the size of the molecules themselves.
A gas at a temperature below its critical temperature can also be called a vapor. A vapor can be liquefied through compression without cooling. It can also exist in equilibrium with a liquid (or solid), in which case the gas pressure equals the vapor pressure of the liquid (or solid).
A supercritical fluid (SCF) is a gas whose temperature and pressure are greater than the critical temperature and critical pressure. In this state, the distinction between liquid and gas disappears. A supercritical fluid has the physical properties of a gas, but its high density lends it the properties of a solvent in some cases. This can be useful in several applications. For example, supercritical carbon dioxide is used to extract caffeine in the manufacturing of decaffeinated coffee.
Phase Changes –What does a phase change look like at the molecular level? This video takes a look at the molecular structure of solids, liquids, and gases and examines how the kinetic energy of the particles changes. The video also discusses melting, vaporization, condensation, and freezing.
Explanation:pa brainliest answer po
The ligand that activates the g-protein linked receptor is:
Answer:
When a ligand binds to the GPCR it causes a conformational change in the GPCR, which allows it to act as a guanine nucleotide exchange factor (GEF). The GPCR can then activate an associated G protein by exchanging the GDP bound to the G protein for a GTP.
which is not involved with an inflammatory Response
A. Fever - increased temperature
B. Slowed blood flow
C. White blood cells move to the area of infected
D. inflammation in area
This is an inflammatory reaction to an infection in the body. Option D is correct.
What is the inflammatory response?When tissues are harmed by toxins, germs, trauma, heat, or any other cause, the inflammatory response (inflammation) ensues. A fever is induced by the body's attempt to destroy any infections with heat.
Histamine, bradykinin, and prostaglandins are among the substances released by injured cells. Because of these substances, blood vessels leak fluid into the tissues, producing swelling.
White blood cells migrate to the affected location to destroy any germs. Because white blood cells are primarily intended to aid in the killing of infections, sending white blood cells to destroy the pathogen is an inflammatory reaction.
Finally, inflammation results from the body's attempt to cleanse the contaminated region of microorganisms. Similar to the label “inflammatory,” the body will frequently create inflammation in an attempt to cleanse the body of any undesirable infections.
Therefore, option D is correct.
Learn more about the inflammatory Response, refer to:
https://brainly.com/question/14967011
#SPJ2
What happens during metaphase 2 in meiosis?
Answer:
During metaphase II, the centromeres of the paired chromatids align along the equatorial plate in both cells. Then in anaphase II, the chromosomes separate at the centromeres. The spindle fibers pull the separated chromosomes toward each pole of the cell.
Suppose a person uses a microscope to look at a cell from the leaf of a tree.
Which structure would they see that would not be found in a cell from a fingernail?
ribosomes
chloroplasts
cilia
mitochondria
do not put a link
Answer:
chlooplast
Explanation:
because those are the ones that are only in plants and they make photosynthesis
b Explain why animals need plant biomass.
Answer:
its in the type of nutrience they have
Explanation:
Answer:
Plants provide oxygen so are vital to animals in order to survive. Many insects use plants to place their eggs: insects. Or even to protect themselves from the sun. Animals obtain part of their water intake through plants.
Explanation:
hope it helps
which statement concerning rare threatened or endangered species is true
Why does rainfall allow for species riches
HELP PLEASE!
Answer:
The coefficient of variation in aboveground biomass of annuals decreased significantly with increasing annual and growing-season precipitation. Species richness of annuals increased significantly with increasing annual precipitation and growing-season precipitation.
Explanation:
what evidence can be cited from the fossils to reconstruct climate change over time?
Answer: When studying the museum’s collection of plant fossils for information about the climate, Wing and Barclay start with plant leaves.
Roughly 56 million years ago, during a time called the Paleocene Eocene Thermal Maximum (PETM), Earth’s average temperature rose four to eight degrees Celsius in less than 10,000 years. The cause was geologic processes releasing trillions of tons of carbon dioxide into the atmosphere. The dramatic shift in global climate forced massive upheaval in ecosystems around the world.
“It’s the best analogue for the climate change we’re experiencing today,” Barclay said.
Fossil plants and their leaves from the PETM show that ecosystems shifted massively because of the rapid increase in global temperature. But global warming during the PETM did not come from humans. So, scientists today are working on ways to extrapolate information from that period and apply it to the even faster and more drastic events of today.
under the biological species concept, what criterion is used to assign populations of organisms to the same biological species?
Answer: According to the biological species concept, organisms belong to the same species if they can interbreed to produce viable, fertile offspring. Species are separated from one another by prezygotic and postzygotic barriers, which prevent mating or the production of viable, fertile offspring. Speciation is the process by which new species form