kettles heated on stoves used to be made of copper. was this a good choice?

Answers

Answer 1
Yes, this was a good choice


Hope that helped,


Stay safe happy & healthy!
Answer 2

Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.

Why copper is used in making kettles?

Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.

Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.

Learn more about Copper here:

https://brainly.com/question/13677872


#SPJ2


Related Questions

Explain how two rolling bowling balls of different masses can have the same momentum

Answers

Knowing that the momentum(p) of an object is directly (when one number goes up the other will too) related to both the mass and velocity of an object or p=mv, two rolling bowling balls of different masses can have the same momentum because the one with the lower mass, has a higher velocity. The higher velocity of an object would make up for the lower mass and vice versa.

Answer:

Sample Response: Momentum is equal to the mass of an object multiplied by the velocity of an object. The two bowling balls can have the same momentum if the bowling ball with less mass has a higher velocity, and vice versa. As long as the product of the mass and velocity of one bowling ball is equal to the product of the mass and velocity of the other, the bowling balls will have the same momentum.

Explanation:

Answer this physics question ASAP. please​

Answers

Answer:

Explanation:

After much working on this, I got the force between A and C to be 12 and the force between B and C to be 9. the total force I found then was 15 N at 53 degrees. I used the angle between A and C as 90 degrees and the angle between B and C to be 0 )I just rotated the right triangle a bit to make it easier to work with).

do you believe that the universe is expanding?​

Answers

Answer:

Yes

Explanation:

Many scientists believe that the universe is expanding at an increasing rate. Scientists cannot explain how the universe is expanding at an increasing rate because by law of conservation of energy, there is only a finite amount of energy. Thus, scientists have called this new source of energy dark matter and it is all around the universe helping shape and form the universe.

A small car increases its speed from 10 m/s to 15 m/s. Its mass is 1,200 kg. What is the impulse?
A. 6,000 kg-m/s
B. 18,000 kg-m/s
C. 12,000 kg.m/s
D. 1,200 kg-m/s

Answers

Answer:

A

Explanation:

We know that impulse(J) is the force times the change in time OR mass times the change in velocity. Because we're given mass and a final and initial velocity, we'll use the second option written as:

mΔv=J

Since Δ means change in, and Δv= vf-vi, we subtract 10 m/s from 15 m/s to get 5 m/s for Δv.  

Now plugging in Δv and m(1,200 kg)

1,200 kg * 5 m/s =J

6000 kg* m/s = J

please help.. i got it wrong on my last attempt

Answers

Answer:

The answer is C.

Explanation:

The answer is a , Thermo means heat & dynamic is when something moves.

a 2kg object is dropped from height of 10m. ignoring air resistance calculate:

1. mechanical energy of the object

2. kinetic energy of the object when it is 3m above the ground

Answers

Answer:

ME= 196.2 J

KE= 136.2

Explanation:

potential energy=mgh 2*9.81*10

Our ME is quivalent to PE as that is the toal amount of energy in the system

Kinetic energy= 1/2 m[tex]v^{2}[/tex]

to solve for kinetic enrgy we need to use a kinaetmtic equation that help us find velocity

vf= vi+at

but we need to find time first

d=vi+1/2(accelretaion)[tex]t^{2}[/tex]

7=0+1/2(9.81)[tex]t^{2}[/tex]

t= 1.19 s

vf= 0+ 9.81*1.19

vf= 11.67 m/s

Now

1/2 m[tex]v^{2}[/tex]

1/2*2*[tex]11.67^{2}[/tex]

= 136. 2

or we could just (PE/10)*7

so (196.2/10)*7

A cannon sitting on level ground is aimed at 45.0 degrees relative to the horizontal. It fires a test shot at a target located 100.0 meters away from the cannon on the same level ground. The test overshoots the target by 20.0 meters. Which of the following angles can the cannon be adjusted to to hit the target. You may neglect air resistance and assume the cannon always delivers the same initial velocity to the cannonball .

A. 35.9 deg
B. 49.1 deg
C. 28.2 deg
D. 52.8 deg
E. 22.7 deg

Answers

Answer:

C. 28.2 deg

Explanation:

The horizontal range of a projectile is given as:

[tex]R = \frac{v^2Sin2\theta}{g}[/tex]

where,

R = Range

v = speed

θ = angle of launch

g = acceleration due to gravity = 9.81 m/s²

First, we will find the launch speed (v) by using the initial conditions:

R = 120 m

θ = 45°

Therefore,

[tex]120\ m = \frac{v^2Sin 90^o}{9.81\ m/s^2}\\\\v = \sqrt{(120\ m)(9.81\ m/s^2)}\\\\v = 34.31\ m/s[/tex]

Now, consider the second scenario to hit the target:

R = 100 m

Therefore,

[tex]100\ m = \frac{(34.31\ m/s)^2Sin2\theta}{9.81\ m/s^2}\\\\Sin2\theta = \frac{(100\ m)(9.81\ m/s^2)}{(34.31\ m/s)^2}\\\\2\theta = Sin^{-1}(0.833)\\\\\theta = \frac{56.44^o}{2}\\\theta = 28.22^o[/tex]

Hence, the correct option is:

C. 28.2 deg

Explain how you can use the factors of production to produce a fruit juice in a production company

Answers

Answer:

The factors of production include Land, Labour, Capital and Enterpreneurship

Explanation:

The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.

The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.

What is the colour of a shirt which has blue and white stripes when put under yellow light? Explain.​

Answers

Answer:

Black and yellow strips.

Explanation:

Color of shirt is blue and white stripes

When the shirt is seen in the yellow light, the blue color do not reflect any color so it appears black and the white color reflects the yellow light so it appears yellow.

Thus, the color of shirt is blue appears black and white appears yellow.

In uplifting 750 newton load with the help of 2 meter long lever lever took 250 newton efforts . What will be the efficiency of a machine if the fulcrum is kept 50 cm from the load

Answers

Answer:

the efficiency of the machine is 100%

Explanation:

Given;

load, L = 750 N

length of the lever, L = 2 m

effort applied, E = 250 N

Position of the load from the fulcrum,  = 50 cm

                                     50cm

     0↓--------------------------Δ-------------------------------↓---------200 cm

    750 N                                       x cm                 250 N

Apply the principle of moment;

750(50) = 250(x)

x = (750 x 50) / (250)

x = 150 cm

the distance of the effort = 150 cm = 1.5 m

the distance of the load = 50 cm = 0.5 m

The velocity ratio of the machine = 1.5/0.5

                                                        = 3

The mechanical advantage of the machine is calculated as;

M.A = Load/effort

M.A = 750 / 250

M.A = 3

The efficiency of the machine is calculated as;

E = (M.A / V.R) x 100%

E = (3/3) x 100% = 100%

Therefore, the efficiency of the machine is 100%

explain the role of standard units to bring uniformity in the measurement​

Answers

Answer:

We need standard unit for measurement to make our judgement more reliable and accurate. For proper dealing, measurement should be same for everybody. Thus there should be uniformity in measurement. For the sake of uniformity we need a common set of units of measurement, which are called standard units.

Mean diameter of cylinder measured by A is 2.50 cm with a possible error of 0.25 cm whereas mean height of cylinder measured by B is 10.0 cm with a possible error of 0.5 cm. Whose measurement is more accurate?

Answers

Answer:

The measurement of first cylinder is more accurate.(A)

Explanation:

The least possible error higher will be accuracy.

How much current flows in the circuit if two resistors of 6 connected in parallel are
supplied with potential difference of 12 volts?​

Answers

Answer:

4 A

Explanation:

Firstly we need to calculate the equivalent resistance. Since, two resistors of 6 connected in parallel, so equivalent resistance will be given by,

[tex]\longrightarrow[/tex] 1/R = 1/R1 + 1/R2

[tex]\longrightarrow[/tex] 1/R = (1/6 + 1/6) Ω

[tex]\longrightarrow[/tex] 1/R = (1 + 1)/6 Ω

[tex]\longrightarrow[/tex] 1/R = 2/6 Ω

[tex]\longrightarrow[/tex] R = 6/2 Ω

[tex]\longrightarrow[/tex] R = 3 Ω

We know that,

[tex]\longrightarrow[/tex] V = IR

V denotes p.d (12V)I denotes currentR denotes resistance (3 Ω)

[tex]\longrightarrow[/tex] 12 = I × 3

[tex]\longrightarrow[/tex] 12 ÷ 3 = I

[tex]\longrightarrow[/tex] 4 Ampere = I

The work function for silver is 4.73 eV. (a) Convert the value of the work function from electron volts to joules.

Answers

Answer:

[tex]W=7.56\times 10^{-19}\ J[/tex]

Explanation:

Given that,

The work function for silver is 4.73 eV.

We need to find the value of the work function from electron volts to joules.

We know that,

[tex]1\ eV=1.6\times 10^{-19}\ J[/tex]

For 4.73 eV,

[tex]4.73\ eV=1.6\times 10^{-19}\times 4.73\\\\=7.56\times 10^{-19}\ J[/tex]

So, the work function for silver is [tex]7.56\times 10^{-19}\ J[/tex].

What is Unit and standard unit?​

Answers

Answer:

The standard quantity with which we carry out the measurement of any physical quantity of the same kind is called a unit.

a ball is launched upward at an angle from the ground. which way does its acceleration point at the top?

Answers

For a ball that is launched upward at an angle from the ground, the direction of its acceleration at the top of the projectile curve is downwards.

Acceleration of the ball at the top

As the ball is projected upward its acceleration points upwards until the ball reaches the maximum height or top of the projectile path.

At the top of the projectile path, its acceleration start pointing downwards.

Thus, for a ball that is launched upward at an angle from the ground, the direction of its acceleration at the top of the projectile curve is downwards.

Learn more about downward acceleration here: https://brainly.com/question/22048837

#SPJ1

Answer:

vertical

Explanation:

a stone of mass 250kg and another stone of mass 400 kg are kept at a distance of 100m what amount of gravitational force develops between them?​

Answers

Explanation:

Hey there!

Given;

Mass of one object (m1) = 250kg

Mass of another object (m2) = 400 kg

Distance (d) = 100 m

Gravitational constant (g) = 6.67*10^-11

Now;

[tex]f = \frac{g.m1.m2}{ {d}^{2} } [/tex]

Keep all values;

[tex]f = \frac{6.67 \times {10}^{ - 11} \times 250 \times 400}{ {(100)}^{2} } [/tex]

Simplify

[tex]f = \frac{6.67 \times {10}^{ - 11} {10}^{5} }{10000} [/tex]

[tex]f = \frac{6.67 \times {10}^{ - 6} }{10000} [/tex]

Therefore, gravitational force is 6.67*10^-10.

Hope it helps!

integrated science please help​

Answers

Answer:

As we all knows that Matter is everything that occupies in space.

(A) There are three major types of Matter;

SolidGasLiquid

(B) (I) If John took five ice cubes from the freezer and place them into a cup after 5 minutes, he returned and saw water this process is called melting.

(ii) if he put the same cup into the freezer and turned into ice in 5 minutes this

process is called freezing.

(iii) if John places the ice from the cup into a pot on a lit stove for 2 minutes and leaves, and he returned and find the pot empty this process is called evaporation.

During an Apollo lunar landing mission, the command module continued to orbit the Moon at an altitude of about 112 km . How long did it take to go around the Moon once?
Express your answer using three significant figures and include the appropriate units.

Answers

T=2 Hours 6 Minutes 33.53 Seconds


[tex]what \: is \: reflection \: of \: light \: \: \: \: {?}[/tex]

Answers

Answer:

When a ray of light approaches a smooth polished surface and the light ray bounces back, it is called the reflection of light. The incident light ray which lands upon the surface is said to be reflected off the surface. The ray that bounces back is called the reflected ray.

what is good operating practice concerning the use of aircraft lighting while on the ground at night

Answers

Answer:

It is important to be extra careful at night and in periods of low visibility from sunset to sunrise and to focus on operating the aircraft safely when the aircraft is moving. Ensure checklist are run through and avoid non essential communications prior to the aircraft being stopped and the breaks are set

Explanation:

According to aircraft rules and regulation, the position lights of an aircraft are required to be switched on on an aircraft which is either operated on the surface and during flight from sunset to sunrise or when the elevation of the Sun below the horizon is more than 6°

However, the anti collision lights are not required to be lighted during night operations, unless the pilot in command specifies it for safety reasons

physics class 9 chapter 8 please tell​ please

Answers

Answer:

(a) The motion is uniform

(b)  11.11 m/s

Explanation:

(a)

From the table below, the motion of the bus is uniform.

(b)

Speed(s) = Δd/Δt

s = Δd/Δt............. Equation 1

From the table,

Given: Δd = 10 km = 10000 m, Δt = 15 minutes = (15×60) = 900 seconds

Substitute these values into equation 1

s = 10000/900

s = 11.11 m/s

Why would researchers not be allowed to recreate the Little Albert experiment today?

Answers

Answer:

Explanation:

En la historia de la ciencia se han dado auténticas barbaridades. Pruebas con animales que hoy no perdonaría nadie, o investigaciones de conducta con personas como la de la cárcel de Stanford, que se han saldado como una especie de pasado incómodo sobre los límites de la experimentación. Sin embargo, pocos se pueden acercar por su carácter perturbador al denominado experimento de Little Albert o Pequeño Albert: El salvaje intento por probar con un bebé que las fobias pueden ser condicionadas y aprendidas. Y lo que es peor, conseguirlo.

Esta idea surgió de la mente de John Broadus Watson, reconocido padre de la rama conductista de la psicología, que desde 1913 había comenzado a probar en animales sus tesis. Estas bebían directamente del los estudios de Iván Pavlov, fisiólogo ruso que ganó el Nobel en 1904 por sus estudios sobre el sistema digestivo, pero que también sentó precedentes sobre la psicología.

link por si te interesa:

https://hipertextual.com/2017/10/pequeno-albert

An instrument rated pilot is planning a flight under IFR on July 10, this year. Before conducting the flight, the pilot must have

Answers

Answer: See explanation

Explanation:

From the information given, we are informed that an instrument rated pilot is planning a flight under IFR on July 10, this year.

It should be noted that before conducting the flight, the pilot must have performed and logged the prescribed tasks and repetitions that are required for instrument currency no earlier than January, 10 for the year.

Juanita ran one mile around her school track in six minutes. What is
her average speed, and what is the magnitude of her average velocity?
10 mph, 0 mph
6 mph, 0 mph
6 mph, 6 mph
10 mph, 10 mph

Answers

Answer:

The correct option is a) 10 mph, 0 mph.

Explanation:

1. The average speed (S) is a magnitude given by:

[tex] S = \frac{D}{T} [/tex]  

Where:

D: is the total distance = 1 mi

T: is the total time = 6 min

[tex] S = \frac{D}{T} = \frac{1 mi}{6 min}*\frac{60 min}{1 h} = 10 mph [/tex]

Hence, the average speed is 10 mph.

2. The average velocity is a vector:

[tex] V = \frac{\Delta d}{\Delta t} = \frac{d_{f} - d_{i}}{t_{f} - t_{i}} [/tex]

Where:

[tex]d_{f}[/tex]: is the final distance                                    

[tex]d_{i}[/tex]: is the initial distance  

[tex]t_{f}[/tex]: is the final time                

[tex]t_{i}[/tex]: is the initial time

Since Juanita ran one mile around her school track, the final position is the same that the initial position, so the magnitude of the average velocity is zero.                                               

Therefore, the correct option is a) 10 mph, 0 mph.

I hope it helps you!          

Atoms contain both positive nuclei and a negative electron cloud. Which of the following would cause an attraction between two atoms?

A. The nucleus of one atom and the electron cloud another atom


B.The nucleus of one atom and the nucleus of another atom

C. The electron cloud of one atom and the electron cloud of another atom

D.None of these would cause an attraction between atoms

Answers

Answer:

Option (D)

Explanation:

A. The nucleus of one atom and the electron cloud of the another atom will not the cause of attraction.

B. The nucleus of one atom and the other atom will not cause the attraction.

C. The electron cloud of one atom and the electron cloud of the another will not cause attraction.

D. So, this option is correct.

pahelp po ako.

1. Which of the following terms refers to energy in motion?
A. kinetic energy C. potential energy
B. light energy D. thermal energy

2. Which of the following is a type of energy gained due to its position?
A. kinetic energy C. gravitational potential energy
B. light energy D. thermal energy

3. How do you get the total mechanical energy of an object in a closed system?
A. Get the sum of the initial and final kinetic energy.
B. Get the sum of the initial and final potential energy.
C. Get the sum of the kinetic energy and the potential energy.
D. Get the difference between the kinetic energy and the potential energy.

4. Which of the following is the best set up to observe the conservation of mechanical energy?
A. A cart rolling down a wooden ramp.
B. A wooden block falling in a vacuum.
C. A volleyball falling from a tall building.
D. a paper plane being launched from a tower.

5. A big rock was dropped from the third floor of a building. What happens to the kinetic energy of the ball as it falls?
A. The rock’s kinetic energy increases.
B. The rock’s kinetic energy decreases.
C. The rock’s kinetic energy remains the same.
D. The rock’s kinetic energy cannot be identified.

6. A heavy metallic ball was rolled up on a frictionless ramp. What happens to the gravitational potential energy of the ball as it rolls up the ramp?
A. The ball’s gravitational potential energy increases.
B. The ball’s gravitational potential energy decreases.
C. The ball’s gravitational potential energy remains the same.
D. The ball’s gravitational potential energy cannot be identified.


7. A 2kg ball is elevated up a building, how much is its potential energy 10m from the ground?
A. 5J C. 98J
B. 20J D. 196J

For items 8 to 10, refer to the illustration below. A ball is dropped at point W and travels along a frictionless path to reach point Z.
8. At which point does the ball has greatest gravitational potential energy?
A. W C. Y
B. X D. Z

9. At which point does the ball has greatest kinetic energy?
A. W C. Y
B. X D. Z

10. What happens to the total mechanical energy of the ball as it travels from point W to point Z?
A. The total mechanical energy increases.
B. The total mechanical energy decreases.
C. The total mechanical energy remains the same.
D. The total mechanical energy cannot be determined.

For items 11 to 12, refer to the illustration below. A pendulum swings back and forth from its highest position to its lowest position and vice versa.

11. As a pendulum swings from its highest to lowest position, what happens to its gravitational potential energy and kinetic energy?
A. Both its GPE and KE increases.
B. Both its GPE and KE decreases.
C. Its GPE decreases but KE increases.
D. Its GPE increases but KE decreases.

12. What happens to the total mechanical energy of the bob as it swings back and forth if only force acting on it is the gravitational force?
A. The total mechanical energy increases.
B. The total mechanical energy decreases.
C. The total mechanical energy remains the same.
D. The total mechanical energy cannot be determined.
Four ball of masses 0.5 kg, 1 kg, 2 kg, and 5 kg were dropped simultaneously on top of a building with the height of 20 m. Ignoring the air resistance, the four balls reach the ground at the same time.
13. Which of the following balls has the greatest gravitational potential energy on top of the building?
A. The ball with the mass of 5 kg.
B. The ball with the mass of 2 kg.
C. The ball with the mass of 0.5 kg.
D. All the balls have the same potential energy.
14. Which of the following balls has the least kinetic energy on top of the building?
A. The ball with the mass of 5kg.
B. The ball with the mass of 1kg.
C. The ball with the mass of 0.5kg.
D. All the balls have the same kinetic energy.

15. Which of the following balls has the greatest total mechanical energy?
A. The ball with the mass of 2kg.
B. The ball with the mass of 1kg.
C. The ball with the mass of 0.5kg.
D. All the balls have the same total mechanical energy

Answers

D bc thats sound like the only resonable answer

What is seafloor spreading

A. The formation of new ocean crust when plates spread apart

B. The movement of a continent over time

C. The movement of a tectonic plate under another plate

D. The destruction of underwater mountains by plates

Answers

Answer:

A

Explanation:

The process by which molten materials add new oceanic crust to the ocean floor.

An airplane flies eastward and always accelerates at a constant rate. At one position along its path, it has a velocity of 32.7 m/s . It then flies a further distance of 48500 m , and afterwards, its velocity is 44.7 m/s . Find the airplane's acceleration.

Answers

Answer:

[tex]\quad[/tex]0.0095 m/s²

Explanation:

We have,

Initial velocity (u) = 32.7 m/sFinal velocity (v) = 44.7 m/sDistance travelled (s) = 48500 m

We are asked to calculate the airplane's acceleration.

By using the third equation of motion,

- = 2as

v denotes final velocityu denotes initial velocitya denotes accelerations denotes distance

➝ (44.7)² - (32.7)² = 2 × a × 48500

➝ 1998.09 - 1069.29 = 97000 × a

➝ 928.8 = 97000a

➝ 928.8 ÷ 97000 = a

0.0095 m/s² = a

Mike is serving the volleyball for the second time in a volleyball game. If the ball leaves his hand with twice the velocity it had on the first serve, its horizontal range R would be:

Answers

Answer:

His new horizontal range is 4 times his initial range.

Explanation:

Since Mike serves the ball with velocity, u, his horizontal range is

R = u²sin2Ф/g where Ф is the angle between u and the horizontal.

Now, if on his second serve, the ball leaves his hand with twice the velocity of his initial serve, the new velocity is v = 2u.

So, the new range R' = v²sin2Ф/g

R' = (2u)²sin2Ф/g

R' = 4u²sin2Ф/g

Since R = u²sin2Ф/g,

R' = 4u²sin2Ф/g

R' = 4R

So, his new horizontal range is 4 times his initial range.

Other Questions
Exercise 4-7 Recording sales, purchases, shipping, and returnsbuyer and seller LO P1, P2 Sydney Retailing (buyer) and Troy Wholesalers (seller) enter into the following transactions. May 11 Sydney accepts delivery of $30,000 of merchandise it purchases for resale from Troy: invoice dated May 11, terms 3/10, n/90, FOB shipping point. The goods cost Troy $20,100. Sydney pays $400 cash to Express Shipping for delivery charges on the merchandise. 12 Sydney returns $1,300 of the $30,000 of goods to Troy, who receives them the same day and restores them to its inventory. The returned goods had cost Troy $871. 20 Sydney pays Troy for the amount owed. Troy receives the cash immediately. (Both Sydney and Troy use a perpetual inventory system and the gross method.) 1. Prepare journal entries that Sydney Retailing (buyer) records for these three transactions. 2. Prepare journal entries that Troy Wholesalers (seller) records for these three transactions. A car originally costs $20,000. Its price went up by 20% and then by another $8,000. How much did the price go up as a percentage of the original price? The independent operational test and evaluation agency is responsible for the establishment of Critical Technical Parameters (CTPs). A. True B. False A theater wants to build movable steps that they can use to go on and off the stage. They want the steps to have enough space inside so they can also be used to store props.How much space is inside the steps?Give an exact answer (do not round).Give correct answer and I will give you brainlist In - ABC shown below, side AC is extended to point D with mZ DAB = (180 3x) ,mZ B = (6x 40) , and m2 C = (x + 20). state the story of archimedes Select the correct answer.Tom gets $12 off a box of chocolates that had an original price of $48. What percentage is the discount what are the uses of the definite article "the".Give two examples of each True or false? One theory about phototropism is that auxin triggers a reaction on the shaded side of the stem that causes cell elongation on that side of the plant.Group of answer choicesTrueFalse Promotional expenses at the maturity stage of the product life cycle are often designed to Multiple Choice maintain market share. create a sense of nostalgia. attract more price-conscious consumers. thwart the growing number of competitors that have entered the market. convince those who have abandoned the brand to try it again. The mean points obtained in an aptitude examination is 167 points with a standard deviation of 20 points. What is the probability that the mean of the sample would differ from the population mean by less than 3.8 points if 76 exams are sampled After World War II, many Japanese territories were Which expression should be added to sentence 2 to best clarify the relationships among Paco's ideas?AdditionallyAlthoughSimilarlyHowever Simplify:-5x+6y-9y+4x Tell whether the following two triangles can be proven congruent through SAS.A.Yes, the two triangles are congruent because theyre both right triangles.B.Yes, the two triangles are congruent because two sides and their included angle are congruent in both triangles.C.No, the two triangles can only be proven congruent through SSS.D.No, the two triangles can only be proven congruent through AAA. The inverse of the relation y = 2x + 3 can be obtained graphically by: Which of the following is true for balancing equations?A. There must be an equal number of atoms of each element on both sides of the equation.B. The number of products should be equal to the number of reactantsC. The properties of products should be the same as the properties of the reactantsD. There must be an equal number of compounds on both sides of the equation why is pee yellow and what are the causes if its a differnet color? . Which substance corrodes steel wool the most?A. saltB. acidC. baseD. tap water Which of the changes below is NOT a violation of ceteris paribus when discussing demand for CD players?A. decrease in the price of CD playersB. increase in the price of DVD playersC. increase in the price of CDsD. decrease in the price of MP3 players