jane wants to search for information about the variety of attention disorders that are seen in childhood. which of the following sets of keywords would best get jane started on an effective and efficient search, true or false?

Current flows into the input terminal of a sinking DC field device.

Sinking DC output, often known as sink sourcing, is the opposite of sourcing. It implies that the circuit sinks, or absorbs, a current flowing through it. When a switch is connected between the output of the device and ground, the current flows in this manner. Sinking DC output is used to manage motors, solenoids, and relays that require greater current levels than sourcing devices may supply.

The answer to the question is that current flows into the input terminal of a sinking DC field device. The other options, such as the output terminal of a sinking field device and the input terminal of a sinking output field device, do not apply here. As a result, the correct response is option B: input terminal of a sinking DC field device

Learn more about  industrial control systems:https://brainly.com/question/29848971

#SPJ11

Answer:

To calculate the convolution of x(t) and h(t), we need to use the following formula:

y(t) = integral from 0 to t of {x(tau) h(t - tau) d(tau)}

First, we need to find x(tau) and h(t - tau):

x(tau) = u(tau - 3) - u(tau - 5)

h(t - tau) = e^(-3(t - tau)) u(t - tau)

Substituting these into the convolution formula, we get:

y(t) = integral from 0 to t of {(u(tau - 3) - u(tau - 5)) e^[-3(t - tau)] u(t - tau) d(tau)}

Since u(tau - 3) and u(tau - 5) are step functions, they are non-zero only when tau >= 3 and tau >= 5, respectively. Therefore, the integral can be broken up into two parts:

y(t) = integral from 3 to t of {(u(tau - 3) - u(tau - 5)) e^[-3(t - tau)] d(tau)}

- integral from 5 to t of {(u(tau - 5)) e^[-3(t - tau)] d(tau)}

Simplifying this, we get:

y(t) = (e^(-3t)) [integral from 3 to t of e^(3tau) d(tau) - integral from 5 to t of e^(3tau) d(tau)]

- e^(-15t) integral from 5 to t of e^(3tau) d(tau)

Evaluating the integrals, we get:

y(t) = (1/3) e^(-3t) [e^(3t) - e^(9)] u(t - 3) - (1/3) e^(-3t) [e^(3t) - e^(15)] u(t - 5)

Therefore, the convolution of x(t) and h(t) is:

y(t) = (1/3) e^(-3t) [e^(3t) - e^(9)] u(t - 3) - (1/3) e^(-3t) [e^(3t) - e^(15)] u(t - 5)

Discounting the cash flows over 4 years and the 8.5 % per year MARR, the present worth of the investment would be $205,861.62.

how we know that?

The engineering team at Manuels Manufacturing, Inc., is planning to purchase an enterprise resource planning (ERP) system. To calculate the present worth of each investment, we will use the discounted cash flow method and 4-year planning horizon, with a 8.5 % per year MARR (i.e. discount rate).

For Vendor A, the initial cost is $425,000, and the expected annual increase in revenue is $140,000. Discounting the cash flows over 4 years and the 8.5 % per year MARR, the present worth of the investment would be $323,096.97.

For Vendor B, the initial cost is $250,000, and the expected annual increase in revenue is $105,000.

Learn more about Manuels Manufacturing
brainly.com/question/14230342

#SPJ11

You upload an HTML file to the validator, which means you transfer a copy of the document to the validation website.

HTML stands for Hyper Text Markup Language. It is a programming language that is used to create and structure the content of web pages.

HTML is used to describe the structure of the page, including headings, paragraphs, lists, and links. It also includes codes that specify the formatting of the content, such as font size, color, and style. When creating a website, it is important to ensure that the HTML code is valid.

Validation is the process of checking the HTML code to make sure that it complies with the standards set by the World Wide Web Consortium (W3C). Valid HTML code ensures that the website is accessible to all users, regardless of their browser or device. It also helps to improve the search engine optimization (SEO) of the site by making it easier for search engines to crawl and index the content.

For such more question on HTML:

https://brainly.com/question/29410311

#SPJ11

When testing a four-wheel drive electronic component, the technician will use a scan tool to pull codes, and then a multimeter to diagnose any codes found.

A multimeter is an electronic measuring instrument that combines various measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters have a microammeter whose pointer moves over a scale calibrated for all the various measurements that can be taken; digital instruments display digits on a screen; and, if equipped, an audio output for continuity and an auxiliary transducer input for temperature or capacitance measurement are also available. The multimeter's main purpose is to determine whether the electrical components and circuits are working correctly. To do so, the multimeter uses probes, which are the leads or wires connected to the tool. The black lead is connected to the COM (common) jack on the multimeter, while the red lead is connected to the VΩmA jack. When diagnosing codes found using a scan tool, it is important to use a multimeter to accurately diagnose the cause of the problem.

To learn more about Multimeter :

https://brainly.com/question/29838675

#SPJ11

The probable causes for the garbled print from a printer are:

a. Print drivers are corrupt or need to be updated.

b. An application on the computer is sending garbled print.

Print drivers are corrupt or need to be updated: Print drivers are software programs that allow the printer to communicate with the computer. A corrupt driver may cause garbled print, and it can be resolved by updating or reinstalling the drivers.

An application on the computer is sending garbled print: The garbled print may be due to a particular application running on the computer that is causing the issue. The problem may be resolved by checking the application settings or by running a virus scan. The other options mentioned in the question are not related to the issue. Ink cartridge clogged nozzles, printer calibration, printer paper, and cleaning the printer are not likely to cause garbled print.

Learn more about printer at:

https://brainly.com/question/27962260

#SPJ11

The tension in the cable when the balloon is inflated as a sphere having a diameter of 60 ft is equal to T = 2000 - (-29.489) = 2029.489 lb.

The tension in the cable when the balloon is inflated as a sphere having a diameter of 60 ft can be determined by first calculating the volume of the balloon. The volume of a sphere is equal to V = 4/3πr3, where r is the radius of the sphere (or half the diameter). Therefore, the volume of the balloon is V = 4/3π(60/2)3 = 904.778 ft3.

We then need to calculate the lift force generated by the hot air. This is equal to the difference in the weights of the hot air and the ambient air multiplied by the volume of the balloon. The weight of the hot air is equal to the specific weight of hot air (0.040 lb/ft3) multiplied by the volume of the balloon (904.778 ft3). Similarly, the weight of the ambient air is equal to the specific weight of ambient air (0.070 lb/ft3) multiplied by the volume of the balloon (904.778 ft3). Therefore, the lift force is equal to F = (0.040 - 0.070) × 904.778 = -29.489 lb.

Finally, the tension in the cable can be determined by subtracting the lift force generated by the hot air from the total weight of the gondola, weights, passengers, and material. Therefore, the tension in the cable when the balloon is inflated as a sphere having a diameter of 60 ft is equal to T = 2000 - (-29.489) = 2029.489 lb.

To learn more about "tension": brainly.com/question/11348644

#SPJ11

It is a primary protocol that facilitates communication between different devices on the Internet. It is a connection less protocol that does not guarantee packet delivery. Despite this, it has been useful in transmitting data across the network.

1)One way that IP contributes to Internet communications is by providing a unique IP address to each device on the network. IP addresses are unique numerical identifiers that are used to locate and identify devices on the network. This makes it easy to transmit data between different devices on the network. It is impossible to transmit data over the Internet without an IP address.

2)The Internet Protocol has also contributed to the development of other protocols that are used for Internet communications. For example, TCP/IP is a protocol suite that is used for transmitting data over the Internet. It consists of two protocols, namely TCP and IP. TCP is a protocol that ensures that data is transmitted reliably between devices on the network. It guarantees packet delivery and provides error correction mechanisms.
3)The Internet Protocol (IP) has also contributed to the development of network security protocols. It is used to encrypt data and ensure that data is transmitted securely over the network. This has been important in protecting sensitive information from unauthorized access. In summary, the Internet Protocol (IP) has played a significant role in facilitating Internet communications. It has contributed to the development of other protocols and has also been important in ensuring network security.

for more such question on protocol

https://brainly.com/question/28811877

#SPJ11

Shift and rotate instructions are used to change the position of bits in a register or memory operand.

What are shift and rotate instructions in computer programming?

In the given code sequence, the value of AL after each shift or rotate instruction has executed arena. After executing shr al,1 the value of AL will be 06h.b. After executing sar al,1 the value of AL will be DCh.c. After executing sar al,4 the value of AL will be 0Dh.d. After executing rol al,1 the value of AL will be A9h.What are shift and rotate instructions?Shift and rotate instructions are used to change the position of the bits in a register or memory operand.

The shift instruction is used to move the bit either left or right, whereas the rotate instruction is used to rotate the bits in a specified direction. For example, in the given code sequence move al,0D4h is the MOV instruction, which moves the value of 0D4h into the AL register. After that, the SHR instruction performs the shift operation on AL, which is a right shift by 1 bit, so the value of AL is divided by two, and the value of AL becomes 0D4h / 2 = 06h.

Then the second instruction, SAR, performs the shift operation, which is also a right shift, but it preserves the MSB of AL, so the value of AL becomes DCh.After that, the SAR instruction performs another shift operation on the AL register, which is a right shift of 4 bits.

So the value of AL becomes 0Dh, which is equivalent to D4h / 16.

Finally, the ROL instruction performs the rotate operation on the AL register, which rotates the bits of AL left by one position. After this operation, the value of AL becomes A9h.

Learn more about: shift and rotate

brainly.com/question/14611599

#SPJ11

Energy saved = 21,900 kWh per year

Fuel Saved = 730 liters

Let's dive deeper into the details below.

One can save energy in various ways, such as walking up a floor instead of taking the elevator, walking, or riding a bike for an hour a day instead of driving a car. Here are some ways in which energy can be saved:

1. Turning off lights and electronics when they're not in use

2. Using energy-efficient light bulbs

3. Reducing water usage

4. Using public transportation, biking, or walking instead of driving a car

5. Installing a programmable thermostat

6. Purchasing energy-efficient appliances

7. Using natural light to save energy

8. Properly insulating homes to save energy

9. Upgrading to energy-efficient windows and doors

10. Planting trees and shrubs to shade your home and keep it cool during the summer.

11. Weatherizing your home to keep heat in during the winter.

Assumptions: Let's assume that there are three floors in a building, and each floor has five rooms, and each room has four tube lights (40 watts each) that run for ten hours each day. Now, if we replace these tube lights with LED lights, which consume ten watts each, we can save 30*5*4*40 = 60,000 watts per day.

It will be equal to 60 kWh per day or 21,900 kWh per year.

Assumptions: Let's assume that you drive 20 km every day, and your car's average fuel consumption is 10 km per liter of petrol. If you ride a bicycle instead of driving a car for one hour each day, you can save 20/10 = 2 liters of petrol per day.

It will be equal to 730 liters of petrol per year.

Learn more about energy.

brainly.com/question/1932868

#SPJ11

The answer we get is that  the algorithm checked 12, 20, 24, and 25, which are 4 elements.

how we know that?

To find 25 using binary search, 4 elements will be checked. Binary search works by checking the middle element of a sorted list, then comparing it to the element you're looking for. If the middle element is greater than the element you're looking for, you move on to the left side of the list and repeat the process, and if it is smaller you move to the right side and repeat the process.

In this case, the middle element is 20, which is smaller than 25, so the algorithm will check the right side of the list. The middle element of the right side of the list is 24, which is also smaller than 25, so the algorithm will check the right side of the list again. The middle element of the right side of the list is now 25, which is equal to the element we are looking for.
Learn more about sorted elements

brainly.com/question/29659711

#SPJ11

The address of the element stored at arr[20][30] in the 2-D array declaration char Arr[100][100] would be 30 + 20 * 100 = 2030.

The declaration of the 2-D array is shown below:

char Arr[100][100]

Here, Arr is a 2-D array consisting of 100 rows and 100 columns. This means that there are a total of 10,000 elements in this array. Each element of this array is of type char. Therefore, each element will occupy a single byte of memory.

The array is byte-addressable. This means that each element of the array is accessible using its byte address. Since each element occupies a single byte of memory, the byte address of an element is the same as its memory address.

To calculate the address of the element stored at arr[20][30], we first need to understand how the elements are stored in the array.

The elements of a 2-D array are stored in row-major order. This means that the elements of the first row are stored first, followed by the elements of the second row, and so on. Within a row, the elements are stored from left to right.Now, to calculate the address of the element stored at arr[20][30], we need to calculate the byte address of this element. Since the array is byte-addressable, we can calculate the byte address of an element by multiplying its row number by the number of columns in the array and adding its column number. This gives us the following formula:

Byte Address of Element = Base Address + (Row Number * Number of Columns + Column Number)

Since the base address of the array is 0, we can simplify this formula to:

Byte Address of Element = Row Number * Number of Columns + Column Number

Using this formula, we can calculate the byte address of the element stored at arr[20][30] as follows:

Byte Address of Element = 20 * 100 + 30 = 2030

Therefore, the address of the element stored at arr[20][30] is 2030.

Learn more about 2-D array declaration here:

https://brainly.com/question/26104158

#SPJ11

A dying patient goes through the stages of grief according to Kubler-Ross in the following order: The initial stage of denial occurs when a patient rejects the truth of their circumstance.

When a person experiences a big loss or another event that changes their life, they may go through a number of emotional and psychological reactions known as the stages of grief. Elisabeth Kubler-Ross, a psychiatrist, initially postulated these stages when she outlined the five stages of grief: denial, anger, bargaining, depression, and acceptance. The stages of mourning can be used to process different types of loss outside the death of a loved one, such the end of a relationship or a significant life change. Individuals can recognise and deal with their emotions in a healthy and constructive way by being aware of the phases of grief. It's crucial to remember that not everyone experiences all of these stages, and they may do so in a different order.

Learn more about  stages of grief here:

https://brainly.com/question/28559176

#SPJ4

The Kubler-Ross model proposes five stages of grief that a dying patient may experience. These stages do not necessarily occur in a specific order, and some people may not experience all of them. The stages are:

Denial: In this stage, the patient may refuse to accept the reality of their illness and may try to continue with their daily routine as if nothing has changed.

Anger: The patient may feel anger and frustration towards their illness, healthcare providers, or even loved ones who they feel have let them down.

Bargaining: The patient may try to make deals with a higher power, such as God, in an attempt to prolong their life or make their illness go away.

Depression: The patient may feel overwhelming sadness and may withdraw from loved ones or lose interest in their hobbies and interests.

Acceptance: In this final stage, the patient may come to terms with their illness and accept their fate. They may feel a sense of peace and may want to spend their remaining time with loved ones.

Find out more about the Kubler-Ross model

at brainly.com/question/28268713

#SPJ4

There are typically three layers of government: National Administration,

Local Government, Provincial/State Government.

The several tiers or levels of decision-making and governance in a nation or region are referred to as levels of government. National, provincial/state, and local governments make up the three primary tiers of government. The provincial/state government is in charge of a particular region or state within the country, whereas the national government is in charge of decisions and policies that have an impact on the entire nation. A city, town, or municipality is an example of a local area that is affected by decisions and policies made by the local government. In some nations, traditional authority may also be involved in local government and decision-making. Although each level of government has distinct duties and functions, they all cooperate to ensure that a nation or other entity runs smoothly.

Learn more about "levels of government." here:

https://brainly.com/question/21826397

#SPJ4

With the $(cmd) method, it is possible to conduct command substitution, the act of running a smaller command inside of a bigger one.

To execute the for command within a batch file, use double percent marks (%%). Variables must be expressed with an alphabetical value, such as %a, %b, or %c, and they are case-sensitive. ( ) Required. specifies a range of values, one or more files, folders, or text strings on which to run the command.

The Command key, also known as the Cmd key or open Apple key, is a modifier key found on Apple keyboards. It was formerly known as the Apple key or open Apple key.

To know more about command visit:-

https://brainly.com/question/3632568

#SPJ1

The CO molecule's initial excited vibrational state has a displacement from the equilibrium bond distance that is most likely 0.2262 Angstroms.

A diatomic molecule vibrates similar to two masses being supported by a spring, and its potential energy is proportional to the square of the deviation from equilibrium. But the quantized energy levels have values that are evenly spaced apart. The frequency in this form corresponds to the simple harmonic oscillator's traditional form.

[tex]x = √(h/2μω)(2(1)+1/2) = √(h/2(1.14x10^-27 kg)(6.505x10^13 Hz))(3/2)[/tex]

[tex]x = 2.262 x 10^-11 meters[/tex]

Converting to angstroms, we get:

x = 0.2262 Angstroms (rounded to 4 decimal places)

To know more about equilibrium visit:-

https://brainly.com/question/13258910

#SPJ1

If a user is not legitimate, they will not be authorized to access or perform operations within the system or application.

Authentication is the ability to ensure that a user is legitimately who they claim to be. Authentication is the process of verifying a user's identification credentials, such as a password or username, to confirm their identity. Users must have valid authentication information to gain access to a system or application. Authorization is the process of determining whether or not a user is authorized to perform a particular operation. Authorization involves examining a user's permissions or access rights to determine whether or not they are authorized to perform the requested operation. If a user is not authorized to perform an operation, the system will deny the request. Legitimacy is a term used to describe the authenticity of a user. When a user's identity has been verified, it is considered legitimate. A user's legitimacy is critical in maintaining the security and privacy of a system or application.

Learn more about Legitimacy

brainly.com/question/29988064

#SPJ11

The three ways to find outliers in the values in the column of a dataset are:

Options A, B, and D are correct answers.

Statistics tab: This tab provides various statistical measures of the data, including mean, median, standard deviation, and quartiles. Outliers can be detected by comparing the values of the data points with these measures.

Charts tab: The charts tab provides various visualization tools that can help identify outliers, such as box plots, scatter plots, and histograms.

Analyze window: The analyze window provides tools for data exploration and analysis, including outlier detection. This may involve using statistical techniques such as z-score, Tukey's fences, or Mahalanobis distance.

The Schema tab provides information about the structure of the dataset, such as the names and data types of the columns, but it does not directly provide tools for outlier detection.

You can learn more about outlier at

https://brainly.com/question/30966387

#SPJ11

The cost of electricity for working on an assignment in the computer lab with a computer and a CRT monitor that consumes 175 watts/hour for an hour is $0.021.

The cost of each of these appliances or devices over a given period of time can be determined using these formulas. The electricity consumption of computers and CRT monitors in a school computer lab will be determined in this answer.
Calculation of electricity consumption
The electricity consumption of the computer and the monitor is 100 watts/hour and 75 watts/hour, respectively. Calculation of Electricity consumption for an hour
Total power consumption in an hour = 100 watts/hour + 75 watts/hour = 175 watts/hour
Calculation of energy consumption in kilowatt-hours
The formula used to calculate energy consumption is as follows:

Energy (kilowatt-hours) = power (watts) x time (hours) / 1000
So, the energy consumption can be calculated by:
Energy consumption (kilowatt-hour) = (175 watts/hour x 1 hour) / 1000 = 0.175 kWh
Calculation of cost
The formula used to calculate the cost of electricity is as follows:

Cost = energy consumption (kilowatt-hour) x cost per kilowatt-hour
The cost of electricity per kilowatt-hour varies by location. Let's assume the cost per kilowatt-hour is $0.12.
So, the cost of electricity can be calculated by:
Cost = 0.175 kWh x $0.12 = $0.021
Therefore, the cost of electricity for working on an assignment in the computer lab with a computer and a CRT monitor that consumes 175 watts/hour for an hour is $0.021.

To learn more about "electricity consumption": brainly.com/question/14428185

#SPJ11

Force in lbf required to lower the screw = 45.9

Force in lbf required to lower the screw given the R is 7 in long, 1.0 in diameter screw with a pitch p = 0.130 in, where Q is 14 lbf of force and the coefficient of friction is 0.40 can be determined as follows:The pitch is defined as the distance between the same two points on successive threads.

We will make use of the formula given below to find out the force required to lower the screw by using the concept of worm drive.

tan Φ=frictional force/perpendicular force (p/πd)

Φ= inverse tan (frictional force/perpendicular force (p/πd))

Where, Φ is the helix angle of the worm, and d is the diameter of the screw

Substitute the values in the above formula.

tan Φ=0.4 / (0.130/π×1)

Φ = inverse tan (0.4 / (0.130/π×1))

= 19.08 degrees

Tangential force, F = Q/sin Φ

F = 14 / sin 19.08

F = 45.9,  lbf

For more such questions on Force

https://brainly.com/question/12970081

#SPJ11

The magnitude of normal stress is greatest at point D. Point A in the triangular cross-section of a homogeneous beam subjected to a pure bending moment.

The cross-section of a homogeneous beam of triangular cross-section, the point of the cross-section where the magnitude of normal stress is the greatest is Point C.

Normal stress is a type of stress that occurs in a member when a force is applied perpendicular to the member's cross-section. It is calculated using the formula: σ = F/A

Where,σ = normal stress, F = the applied force, and A = the cross-sectional area of the member.

Now, let us consider the cross-section of the beam in question:

The centroid of the cross-section is at point C. This means that the cross-section is symmetric with respect to the y-axis. When a pure bending moment is applied to the beam, it causes the top of the beam to compress and the bottom of the beam to stretch. This creates a normal stress that is maximum at the top and minimum at the bottom.

Since the cross-section is symmetric, this maximum normal stress will occur at a point equidistant from the top and bottom of the beam. This point is point C. Therefore, the point of the cross-section where the magnitude of normal stress is the greatest is Point C.

Learn more about cross-section at:

https://brainly.com/question/28257972

#SPJ11

The given statement "Documentation is a reference guide that describes the features of the program, designed for the user" is True because documentation helps users get started with the software, learn how to use it, and troubleshoot problems.

Documentation is a crucial aspect of software engineering. It is a set of documents that describe a program, system, or application's functionality, architecture, and other characteristics. It is designed to provide users, developers, testers, and maintainers with a clear understanding of how to use, test, develop, and maintain a software product. Documentation is essential in software engineering since it helps people understand the software better. It is usually written in plain language, making it easy to read and comprehend.

Documentation helps users get started with the software, learn how to use it, and troubleshoot problems. It also provides a means of communication between users and developers. The purpose of documentation is to provide clarity and understanding. It should be concise, easy to read, and accurate. Documentation comes in several forms, including user manuals, installation guides, technical documentation, and release notes.

Know more about Documentation here:

https://brainly.com/question/31032809

#SPJ11

The distance between C and E accounting for the compression of the spring and deformation of the bolts is 10.421 inches when the coupling rod is subjected to a force of 5 kip.

A mechanical system's coupling rod, also known as a connecting rod, connects two rotating parts, like an engine's crankshafts. It synchronizes the work of each rotating component by transferring power and motion from one to the other.

We can use the principle of superposition to calculate the individual contributions of the spring and bolts, and then add them together to obtain the total displacement of point E.

First, we can consider the effect of the spring. The displacement of point E due to the spring is given by:

                            ΔE_spring = F/k

where F is the force applied to the coupling rod and k is the spring stiffness. Substituting the given values, we have:

                ΔE_spring = 5 kip / 12 kip/in

                             = 0.417 in

Next, we can consider the effect of the bolts. Each bolt will undergo a change in length due to the force applied to the coupling rod. Assuming that the deformation of each bolt is proportional to its length, we can use the following equation to calculate the displacement of point E due to the bolts:

                   ΔE_bolts = (ΔL_AB + ΔL_BC + ΔL_CE) / 3

where ΔL_AB, ΔL_BC, and ΔL_CE are the changes in length of bolts AB, BC, and CE, respectively.

To calculate the changes in length of the bolts, we can use the following formula:

                         ΔL = F L / (AE E)

where L is the length of the bolt, AE is the cross-sectional area of the bolt, and E is the modulus of elasticity of the bolt material. For A-36 steel, the modulus of elasticity is 29,000 ksi.

Using this formula, we can calculate the changes in length of each bolt as follows:

ΔL_AB = (5 kip) (4 in) / ((0.25 in)² π/4 (29,000 ksi))

                           = 0.0025 in

ΔL_BC = (5 kip) (6 in) / ((0.25 in)² π/4 (29,000 ksi))

                             = 0.0037 in

ΔL_CE = (5 kip) (10 in) / ((0.25 in)² π/4 (29,000 ksi))

                               = 0.0061 in

Substituting these values into the equation for ΔE_bolts, we have:

ΔE_bolts = (0.0025 in + 0.0037 in + 0.0061 in) / 3

                           = 0.0041 in

Finally, we can add the displacements due to the spring and bolts to obtain the total displacement of point E:

ΔE_total = ΔE_spring + ΔE_bolts

                              = 0.417 in + 0.0041 in

                                       = 0.421 in

Therefore, the distance between C and E accounting for the compression of the spring and the deformation of the bolts is:

d = 10 in + ΔE_total = 10 in + 0.421 in

                          = 10.421 in

Therefore, the distance between C and E is 10.421 inches when the coupling rod is subjected to a force of 5 kip, accounting for the compression of the spring and the deformation of the bolts.

Learn more about spring compression :

brainly.com/question/13860882

#SPJ1

The limit on the series resistance so the energy remaining after one hour is at least 75 percent of the initial energy is given by: R ≤ 1.4 Ω

Given data is:

Inductor = 10-H

Suppose that we want to store energy in a 10-H inductor.

Determine the limit on the series resistance so the energy remaining after one hour is at least 75 percent of the initial energy.

The expression for the current in an inductor can be given as:

I = V/R (1 - e^(-Rt/L))

Where, I = current in the inductor

V = potential difference in the inductor

R = resistance of the inductor

L = inductance of the inductor

t = time

Now the expression for the energy stored in an inductor is given as:

W = 1/2 LI^2W = 1/2 L(V/R (1 - e^(-Rt/L)))^2W = 1/2 LI^2 (1 - e^(-2Rt/L))Now, for t = 1 hour

Wfinal = 0.75 Winitial

Therefore,0.75 W

initial = 1/2 LI^2 (1 - e^(-2Rt/L))

On substituting the given values, we get:0.75 Winitial = 1/2 * 10 H * (V/R)^2 (1 - e^(-2R * 1 * 3600/10))0.75 = 1/2 * (V/R)^2 (1 - e^(-720R/10))1.5 = (V/R)^2 (1 - e^(-720R/10))1.5 = (V/R)^2 (1 - e^(-72R))1.5 = (V/R)^2 (1 - e^(-9R/2))

Therefore, the limit on the series resistance so the energy remaining after one hour is at least 75 percent of the initial energy is given by:

R ≤ 1.4 Ω

Learn more about energy storage capacity of inductors:https://brainly.com/question/30895626

#SPJ11

The phase of the SDLC where a detailed plan for programmers to follow is generated and a proposed system is documented using flowcharts and data-flow diagrams is the Design phase.

The System Development Life Cycle (SDLC) is a process used by IT professionals to design, create, test, and maintain software. The SDLC process has a significant impact on the productivity of businesses and how software applications are created. During the Design phase, the software’s comprehensive technical requirements are documented. The development team is tasked with developing a plan for how to meet those technical requirements, and the program’s architectural design is created. It is the stage in the software development process where the software's architecture and specifications are established.Flowcharts and data-flow diagrams are used to document the program's architecture and technical requirements.

Learn more about SDLC: https://brainly.com/question/15696694

#SPJ11

The OSHA standards for construction and general industry are found in title 29 of the Code of Federal Regulations (CFR).

The Code of Federal Regulations (CFR) is a collection of the general and permanent rules and regulations of the United States federal government. It is organized into 50 titles.

These regulations set out the minimum safety and health requirements for employers in these industries and cover a wide range of topics, including electrical safety, fall protection, hazardous materials handling, personal protective equipment, and machine guarding. The OSHA standards also include requirements for record-keeping and reporting of workplace injuries and illnesses, as well as provisions for employee training and education. Employers are responsible for complying with these standards to ensure the safety and health of their employees in the workplace.

To know more about Code of Federal Regulations (CFR)

brainly.com/question/29787481

#SPJ4

The complete question is:

Fill in the blanks,

The OSHA standards for construction and general industry are found in ______________________.

The OSHA standards for construction and general industry are found in the Code of Federal Regulations, specifically, Title 29 Part 1926 for construction and Title 29 Part 1910 for general industry. These materials can be obtained from OSHA's official website or government publication outlets.

The OSHA (Occupational Safety and Health Administration) standards for construction and general industry are found in the Code of Federal Regulations (CFR). Specifically, the standards for construction are within Title 29 Part 1926 of the CFR, while the general industry standards are contained in Title 29 Part 1910. It's essential to familiarize oneself with these standards if working in these respective fields to ensure workplace safety and compliance with federal regulations.

Please note, these manuals can be obtained from the official OSHA website or from any authorized government publication outlet.

https://brainly.com/question/34609652

The information system for online registration is using data validation to ensure that business rules are followed.

Data validation is the process of verifying that data entered into a system is accurate, complete, and meets the required format and business rules. In this case, the system is checking whether the user has met all the necessary prerequisites for a particular course before allowing them to register. This helps to ensure that students are only registered for courses that they are qualified to take, which can help to prevent problems such as dropped courses or failing grades. Overall, data validation is an important tool for ensuring that business rules are followed in information systems, and it plays a critical role in ensuring data quality and accuracy.

To know more about data validation click here:

brainly.com/question/29033397

#SPJ4